# Claremont MakerSpace 3D Printers

| Printer               | [Lulzbot TAZ 6](#lulzbot-taz-6-lulzbot-taz-6) | [Polar 3D](#polar-3d-polar-3d) | [Anet A8](#anet-a8-anet-a8) |
| --------------------- | --------------------------------------------- | ------------------------------ | --------------------------- |
| Filament Diameter(mm) | 3 (2.85)                                      | 1.75                           | 1.75                        |
| Extruder              | Direct                                        | Bowden                         | Direct                      |
| Kinematics            | Cartesian                                     | Cartesian                      | Polar                       |

## [Lulzbot TAZ 6](<./Lulzbot TAZ 6>)

A mostly stock [Lulzbot TAZ 6](https://www.lulzbot.com/store/taz-6).
The Y axis stepper is using the E1 stepper driver because the original Y axis stepper driver is damaged.

## [Polar 3D](<./Polar 3D>)

This is a somewhat odd printer with polar kinematics.
The company that made it no longer makes printers, so documentation is hard to find/non-existant.
Currently running [Klipper](https://www.klipper3d.org/), but has issues with moves near the center of the build plate.

## [Anet A8](<./Anet A8>)

This is a somewhat heavily modified [Anet A8](https://shop.anet3d.com/products/official-anet-a8-3d-printer).
Pretty standard Cartesian bowden printer.
5V regulator is not quite working, so has separate 5V supply bodged on.
Runs stock [Marlin](https://marlinfw.org/).