Apply more HAS_HOTEND

Marlin/src/feature/power.cpp

@@ -74,7 +74,7 @@ bool Power::is_power_needed() {
   HOTEND_LOOP() if (thermalManager.degTargetHotend(e) > 0) return true;
   if (TERN0(HAS_HEATED_BED, thermalManager.degTargetBed() > 0)) return true;
 
-  #if HOTENDS && AUTO_POWER_E_TEMP
+  #if HAS_HOTEND && AUTO_POWER_E_TEMP
     HOTEND_LOOP() if (thermalManager.degHotend(e) >= AUTO_POWER_E_TEMP) return true;
   #endif
 

Marlin/src/gcode/gcode.cpp

@@ -544,7 +544,7 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
       case 120: M120(); break;                                    // M120: Enable endstops
       case 121: M121(); break;                                    // M121: Disable endstops
 
-      #if HOTENDS && HAS_LCD_MENU
+      #if HAS_HOTEND && HAS_LCD_MENU
         case 145: M145(); break;                                  // M145: Set material heatup parameters
       #endif
 

Marlin/src/gcode/gcode.h

@@ -602,7 +602,7 @@ private:
     static void M191();
   #endif
 
-  #if HOTENDS && HAS_LCD_MENU
+  #if HAS_HOTEND && HAS_LCD_MENU
     static void M145();
   #endif
 

Marlin/src/gcode/lcd/M145.cpp

@@ -22,7 +22,7 @@
 
 #include "../../inc/MarlinConfig.h"
 
-#if HOTENDS && HAS_LCD_MENU
+#if HAS_HOTEND && HAS_LCD_MENU
 
 #include "../gcode.h"
 #include "../../lcd/ultralcd.h"

Marlin/src/inc/Conditionals_post.h

@@ -1653,7 +1653,7 @@
   #define HAS_TEMP_ADC_CHAMBER 1
 #endif
 
-#if HOTENDS && EITHER(HAS_TEMP_ADC_0, HEATER_0_USES_MAX6675)
+#if HAS_HOTEND && EITHER(HAS_TEMP_ADC_0, HEATER_0_USES_MAX6675)
   #define HAS_TEMP_HOTEND 1
 #endif
 #define HAS_TEMP_BED        HAS_TEMP_ADC_BED

Marlin/src/lcd/dogm/dogm_Statusscreen.h

@@ -1749,7 +1749,7 @@
 #if HAS_FAN0 && STATUS_FAN_WIDTH && HOTENDS <= 4 && defined(STATUS_FAN_FRAMES)
   #define DO_DRAW_FAN 1
 #endif
-#if HOTENDS && ENABLED(STATUS_HOTEND_ANIM)
+#if BOTH(HAS_HOTEND, STATUS_HOTEND_ANIM)
   #define ANIM_HOTEND 1
 #endif
 #if BOTH(DO_DRAW_BED, STATUS_BED_ANIM)

Marlin/src/lcd/extui/ui_api.cpp

@@ -169,7 +169,7 @@ namespace ExtUI {
   }
 
   void enableHeater(const extruder_t extruder) {
-    #if HOTENDS && HEATER_IDLE_HANDLER
+    #if HAS_HOTEND && HEATER_IDLE_HANDLER
       thermalManager.reset_hotend_idle_timer(extruder - E0);
     #else
       UNUSED(extruder);
@@ -234,7 +234,7 @@ namespace ExtUI {
 
   bool isHeaterIdle(const extruder_t extruder) {
     return false
-      #if HOTENDS && HEATER_IDLE_HANDLER
+      #if HAS_HOTEND && HEATER_IDLE_HANDLER
         || thermalManager.hotend_idle[extruder - E0].timed_out
       #else
         ; UNUSED(extruder)
@@ -746,13 +746,13 @@ namespace ExtUI {
   #endif
 
   float getZOffset_mm() {
+    return (0.0f
       #if HAS_BED_PROBE
-      return probe.offset.z;
+        + probe.offset.z
       #elif ENABLED(BABYSTEP_DISPLAY_TOTAL)
-      return (planner.steps_to_mm[Z_AXIS] * babystep.axis_total[BS_AXIS_IND(Z_AXIS)]);
+        + planner.steps_to_mm[Z_AXIS] * babystep.axis_total[BS_AXIS_IND(Z_AXIS)]
-    #else
-      return 0.0;
       #endif
+    );
   }
 
   void setZOffset_mm(const float value) {
@@ -857,17 +857,9 @@ namespace ExtUI {
   float getFeedrate_percent() { return feedrate_percentage; }
 
   #if ENABLED(PIDTEMP)
-    float getPIDValues_Kp(const extruder_t tool) {
+    float getPIDValues_Kp(const extruder_t tool) { return PID_PARAM(Kp, tool); }
-      return PID_PARAM(Kp, tool);
+    float getPIDValues_Ki(const extruder_t tool) { return unscalePID_i(PID_PARAM(Ki, tool)); }
-    }
+    float getPIDValues_Kd(const extruder_t tool) { return unscalePID_d(PID_PARAM(Kd, tool)); }
-
-    float getPIDValues_Ki(const extruder_t tool) {
-      return unscalePID_i(PID_PARAM(Ki, tool));
-    }
-
-    float getPIDValues_Kd(const extruder_t tool) {
-      return unscalePID_d(PID_PARAM(Kd, tool));
-    }
 
     void setPIDValues(const float p, const float i, const float d, extruder_t tool) {
       thermalManager.temp_hotend[tool].pid.Kp = p;
@@ -882,17 +874,9 @@ namespace ExtUI {
   #endif
 
   #if ENABLED(PIDTEMPBED)
-    float getBedPIDValues_Kp() {
+    float getBedPIDValues_Kp() { return thermalManager.temp_bed.pid.Kp; }
-      return thermalManager.temp_bed.pid.Kp;
+    float getBedPIDValues_Ki() { return unscalePID_i(thermalManager.temp_bed.pid.Ki); }
-    }
+    float getBedPIDValues_Kd() { return unscalePID_d(thermalManager.temp_bed.pid.Kd); }
-
-    float getBedPIDValues_Ki() {
-      return unscalePID_i(thermalManager.temp_bed.pid.Ki);
-    }
-
-    float getBedPIDValues_Kd() {
-      return unscalePID_d(thermalManager.temp_bed.pid.Kd);
-    }
 
     void setBedPIDValues(const float p, const float i, const float d) {
       thermalManager.temp_bed.pid.Kp = p;
@@ -906,20 +890,12 @@ namespace ExtUI {
     }
   #endif
 
-  void injectCommands_P(PGM_P const gcode) {
+  void injectCommands_P(PGM_P const gcode) { queue.inject_P(gcode); }
-    queue.inject_P(gcode);
-  }
 
   bool commandsInQueue() { return (planner.movesplanned() || queue.has_commands_queued()); }
 
-  bool isAxisPositionKnown(const axis_t axis) {
+  bool isAxisPositionKnown(const axis_t axis) { return TEST(axis_known_position, axis); }
-    return TEST(axis_known_position, axis);
+  bool isAxisPositionKnown(const extruder_t) { return TEST(axis_known_position, E_AXIS); }
-  }
-
-  bool isAxisPositionKnown(const extruder_t) {
-    return TEST(axis_known_position, E_AXIS);
-  }
-
   bool isPositionKnown() { return all_axes_known(); }
   bool isMachineHomed() { return all_axes_homed(); }
 
@@ -1008,17 +984,9 @@ namespace ExtUI {
     return IFSD(IS_SD_INSERTED() && card.isMounted(), false);
   }
 
-  void pausePrint() {
+  void pausePrint() { ui.pause_print(); }
-    ui.pause_print();
+  void resumePrint() { ui.resume_print(); }
-  }
+  void stopPrint() { ui.abort_print(); }
-
-  void resumePrint() {
-    ui.resume_print();
-  }
-
-  void stopPrint() {
-    ui.abort_print();
-  }
 
   void onUserConfirmRequired_P(PGM_P const pstr) {
     char msg[strlen_P(pstr) + 1];

Marlin/src/module/configuration_store.cpp

@@ -799,7 +799,7 @@ void MarlinSettings::postprocess() {
     {
       _FIELD_TEST(ui_preheat_hotend_temp);
 
-      #if HOTENDS && HAS_LCD_MENU
+      #if HAS_HOTEND && HAS_LCD_MENU
         const int16_t (&ui_preheat_hotend_temp)[2]  = ui.preheat_hotend_temp,
                       (&ui_preheat_bed_temp)[2]     = ui.preheat_bed_temp;
         const uint8_t (&ui_preheat_fan_speed)[2]    = ui.preheat_fan_speed;
@@ -1649,7 +1649,7 @@ void MarlinSettings::postprocess() {
       {
         _FIELD_TEST(ui_preheat_hotend_temp);
 
-        #if HOTENDS && HAS_LCD_MENU
+        #if HAS_HOTEND && HAS_LCD_MENU
           int16_t (&ui_preheat_hotend_temp)[2]  = ui.preheat_hotend_temp,
                   (&ui_preheat_bed_temp)[2]     = ui.preheat_bed_temp;
           uint8_t (&ui_preheat_fan_speed)[2]    = ui.preheat_fan_speed;
@@ -2557,7 +2557,7 @@ void MarlinSettings::reset() {
   // Preheat parameters
   //
 
-  #if HOTENDS && HAS_LCD_MENU
+  #if HAS_HOTEND && HAS_LCD_MENU
     ui.preheat_hotend_temp[0] = PREHEAT_1_TEMP_HOTEND;
     ui.preheat_hotend_temp[1] = PREHEAT_2_TEMP_HOTEND;
     ui.preheat_bed_temp[0] = PREHEAT_1_TEMP_BED;
@@ -3077,7 +3077,7 @@ void MarlinSettings::reset() {
 
     #endif // [XYZ]_DUAL_ENDSTOPS
 
-    #if HOTENDS && HAS_LCD_MENU
+    #if HAS_HOTEND && HAS_LCD_MENU
 
       CONFIG_ECHO_HEADING("Material heatup parameters:");
       LOOP_L_N(i, COUNT(ui.preheat_hotend_temp)) {

Marlin/src/module/temperature.cpp

@@ -2386,7 +2386,7 @@ void Temperature::tick() {
 
   #if DISABLED(SLOW_PWM_HEATERS)
 
-    #if HOTENDS || HAS_HEATED_BED || HAS_HEATED_CHAMBER
+    #if HAS_HOTEND || HAS_HEATED_BED || HAS_HEATED_CHAMBER
       constexpr uint8_t pwm_mask =
         #if ENABLED(SOFT_PWM_DITHER)
           _BV(SOFT_PWM_SCALE) - 1
@@ -2931,7 +2931,7 @@ void Temperature::tick() {
 
   #endif // AUTO_REPORT_TEMPERATURES
 
-  #if HOTENDS && HAS_DISPLAY
+  #if HAS_HOTEND && HAS_DISPLAY
     void Temperature::set_heating_message(const uint8_t e) {
       const bool heating = isHeatingHotend(e);
       ui.status_printf_P(0,