Add Laser / Spindle bitmap for LCD (#16068)

Marlin/src/feature/spindle_laser.h

@@ -46,6 +46,7 @@
 class SpindleLaser {
 public:
   static cutter_power_t power;
+  static inline uint8_t powerPercent(const uint8_t pp) { return ui8_to_percent(pp); } // for display
 
   static void init();
 

Marlin/src/lcd/dogm/dogm_Statusscreen.h

@@ -598,6 +598,105 @@
 
 #endif // !STATUS_HEATERS_WIDTH && !STATUS_HOTEND1_WIDTH
 
+// LASER / SPINDLE
+#if !STATUS_CUTTER_WIDTH && HAS_CUTTER
+  #define STATUS_CUTTER_WIDTH 24
+  #define STATUS_CUTTER_X 80
+  #if ENABLED(LASER_FEATURE)
+    #ifdef STATUS_CUTTER_ANIM
+      const unsigned char status_cutter_on_bmp[] PROGMEM = {
+        B00000000,B00100100,B00000000,
+        B00000000,B01100110,B00000000,
+        B00000000,B11000011,B00000000,
+        B00000001,B10011001,B10000000,
+        B00000011,B00100100,B11000000,
+        B00000000,B01000010,B00000000,
+        B00000000,B01000010,B00000000,
+        B00000011,B00100100,B11000000,
+        B00000001,B10011001,B10000000,
+        B00000000,B11000011,B00000000,
+        B00000000,B01100110,B00000000,
+        B00000000,B00100100,B00000000
+      };
+      const unsigned char status_cutter_bmp[] PROGMEM = {
+        B00000000,B00100100,B00000000,
+        B00000000,B01100110,B00000000,
+        B00000000,B00000000,B00000000,
+        B00000001,B00000000,B10000000,
+        B00000011,B00000000,B11000000,
+        B00000000,B00011000,B00000000,
+        B00000000,B00011000,B00000000,
+        B00000011,B00000000,B11000000,
+        B00000001,B00000000,B10000000,
+        B00000000,B00000000,B00000000,
+        B00000000,B01100110,B00000000,
+        B00000000,B00100100,B00000000
+      };
+    #else
+      const unsigned char status_cutter_bmp[] PROGMEM = {
+        B00000000,B00100100,B00000000,
+        B00000000,B01100110,B00000000,
+        B00000000,B11000011,B00000000,
+        B00000001,B10000001,B10000000,
+        B00000011,B00000000,B11000000,
+        B00000000,B00000000,B00000000,
+        B00000000,B00000000,B00000000,
+        B00000011,B00000000,B11000000,
+        B00000001,B10000001,B10000000,
+        B00000000,B11000011,B00000000,
+        B00000000,B01100110,B00000000,
+        B00000000,B00100100,B00000000
+      };
+    #endif
+  #else
+    #ifdef STATUS_CUTTER_ANIM
+      const unsigned char status_cutter_on_bmp[] PROGMEM = {
+        B00000001,B11111110,B10000000,
+        B00000000,B11000000,B00000000,
+        B00000001,B10000000,B10000000,
+        B00000001,B00000000,B10000000,
+        B00000001,B11111100,B10000000,
+        B00000000,B11100000,B00000000,
+        B00000001,B11000000,B10000000,
+        B00000000,B10000001,B00000000,
+        B00000000,B01111010,B00000000,
+        B00000000,B00110100,B00000000,
+        B00000000,B00011000,B00000000,
+        B00000000,B00000000,B00000000
+      };
+      const unsigned char status_cutter_bmp[] PROGMEM = {
+        B00000001,B11111110,B10000000,
+        B00000000,B11000000,B00000000,
+        B00000001,B10000000,B10000000,
+        B00000001,B00000000,B10000000,
+        B00000001,B11111100,B10000000,
+        B00000000,B11100000,B00000000,
+        B00000001,B11000000,B10000000,
+        B00000000,B10000001,B00000000,
+        B00000000,B01111010,B00000000,
+        B00000000,B00110100,B00000000,
+        B00000000,B00011000,B00000000,
+        B00000000,B00000000,B00000000
+      };
+    #else
+      const unsigned char status_cutter_bmp[] PROGMEM = {
+        B00000001,B11000010,B10000000,
+        B00000001,B00011100,B10000000,
+        B00000000,B11100001,B00000000,
+        B00000001,B00001110,B10000000,
+        B00000001,B01110000,B10000000,
+        B00000000,B10000111,B10000000,
+        B00000001,B00111111,B10000000,
+        B00000000,B11111111,B00000000,
+        B00000000,B01111110,B00000000,
+        B00000000,B00111100,B00000000,
+        B00000000,B00011000,B00000000,
+        B00000000,B00000000,B00000000
+      };
+    #endif
+  #endif
+#endif // LASER / SPINDLE
+
 //
 // Default Status Screen Bed bitmaps
 //
@@ -1467,6 +1566,51 @@
 
 #endif
 
+//
+// Cutter Bitmap Properties
+//
+#ifndef STATUS_CUTTER_BYTEWIDTH
+  #define STATUS_CUTTER_BYTEWIDTH BW(STATUS_CUTTER_WIDTH)
+#endif
+#if STATUS_CUTTER_WIDTH
+
+  #ifndef STATUS_CUTTER_X
+    #define STATUS_CUTTER_X (LCD_PIXEL_WIDTH - (STATUS_CUTTER_BYTEWIDTH + STATUS_CUTTER_BYTEWIDTH) * 8)
+  #endif
+
+  #ifndef STATUS_CUTTER_HEIGHT
+    #ifdef STATUS_CUTTER_ANIM
+      #define STATUS_CUTTER_HEIGHT(S) ((S) ? sizeof(status_cutter_on_bmp) / (STATUS_CUTTER_BYTEWIDTH) : sizeof(status_cutter_bmp) / (STATUS_CUTTER_BYTEWIDTH))
+    #else
+      #define STATUS_CUTTER_HEIGHT(S) (sizeof(status_cutter_bmp) / (STATUS_CUTTER_BYTEWIDTH))
+    #endif
+  #endif
+
+  #ifndef STATUS_CUTTER_Y
+    #define STATUS_CUTTER_Y(S) 4
+  #endif
+
+  #ifndef STATUS_CUTTER_TEXT_X
+    #define STATUS_CUTTER_TEXT_X (STATUS_CUTTER_X -1)
+  #endif
+
+  #ifndef STATUS_CUTTER_TEXT_Y
+    #define STATUS_CUTTER_TEXT_Y 28
+  #endif
+
+  static_assert(
+    sizeof(status_cutter_bmp) == (STATUS_CUTTER_BYTEWIDTH) * (STATUS_CUTTER_HEIGHT(0)),
+    "Status cutter bitmap (status_cutter_bmp) dimensions don't match data."
+  );
+  #ifdef STATUS_CUTTER_ANIM
+    static_assert(
+      sizeof(status_cutter_on_bmp) == (STATUS_CUTTER_BYTEWIDTH) * (STATUS_CUTTER_HEIGHT(1)),
+      "Status cutter bitmap (status_cutter_on_bmp) dimensions don't match data."
+    );
+  #endif
+
+#endif
+
 //
 // Chamber Bitmap Properties
 //

Marlin/src/lcd/dogm/status_screen_DOGM.cpp

@@ -44,6 +44,10 @@
   #include "../../gcode/parser.h"
 #endif
 
+#if HAS_CUTTER
+  #include "../../feature/spindle_laser.h"
+#endif
+
 #if ENABLED(SDSUPPORT)
   #include "../../sd/cardreader.h"
 #endif
@@ -65,6 +69,7 @@
 
 #define DO_DRAW_LOGO (STATUS_LOGO_WIDTH && ENABLED(CUSTOM_STATUS_SCREEN_IMAGE))
 #define DO_DRAW_HOTENDS (HOTENDS > 0)
+#define DO_DRAW_CUTTER (HAS_CUTTER)
 #define DO_DRAW_BED (HAS_HEATED_BED && STATUS_BED_WIDTH && HOTENDS <= 4)
 #define DO_DRAW_CHAMBER (HAS_TEMP_CHAMBER && STATUS_CHAMBER_WIDTH && HOTENDS <= 4)
 #define DO_DRAW_FAN (HAS_FAN0 && STATUS_FAN_WIDTH && HOTENDS <= 4 && defined(STATUS_FAN_FRAMES))
@@ -72,33 +77,44 @@
 #define ANIM_HOTEND (HOTENDS && ENABLED(STATUS_HOTEND_ANIM))
 #define ANIM_BED (DO_DRAW_BED && ENABLED(STATUS_BED_ANIM))
 #define ANIM_CHAMBER (DO_DRAW_CHAMBER && ENABLED(STATUS_CHAMBER_ANIM))
+#define ANIM_CUTTER (DO_DRAW_CUTTER && ENABLED(STATUS_CUTTER_ANIM))
 
-#define ANIM_HBC (ANIM_HOTEND || ANIM_BED || ANIM_CHAMBER)
+#define ANIM_HBCC (ANIM_HOTEND || ANIM_BED || ANIM_CHAMBER || ANIM_CUTTER)
 
-#if ANIM_HBC
+#if ANIM_HBCC
-  uint8_t heat_bits;
+  enum HeatBits : uint8_t {
+    HEATBIT_HOTEND,
+    HEATBIT_BED = HOTENDS,
+    HEATBIT_CHAMBER,
+    HEATBIT_CUTTER
+  };
+  IF<(HEATBIT_CUTTER > 7), uint16_t, uint8_t>::type heat_bits;
 #endif
 #if ANIM_HOTEND
-  #define HOTEND_ALT(N) TEST(heat_bits, N)
+  #define HOTEND_ALT(N) TEST(heat_bits, HEATBIT_HOTEND + N)
 #else
   #define HOTEND_ALT(N) false
 #endif
 #if ANIM_BED
-  #define BED_ALT() TEST(heat_bits, 7)
+  #define BED_ALT() TEST(heat_bits, HEATBIT_BED)
 #else
   #define BED_ALT() false
 #endif
 #if ANIM_CHAMBER
-  #define CHAMBER_ALT() TEST(heat_bits, 6)
+  #define CHAMBER_ALT() TEST(heat_bits, HEATBIT_CHAMBER)
 #else
   #define CHAMBER_ALT() false
 #endif
-
+#if ANIM_CUTTER
-#if HOTENDS
+  #define CUTTER_ALT(N) TEST(heat_bits, HEATBIT_CUTTER)
-  #define MAX_HOTEND_DRAW _MIN(HOTENDS, ((LCD_PIXEL_WIDTH - (STATUS_LOGO_BYTEWIDTH + STATUS_FAN_BYTEWIDTH) * 8) / (STATUS_HEATERS_XSPACE)))
+#else
+  #define CUTTER_ALT() false
 #endif
 
+#if DO_DRAW_HOTENDS
+  #define MAX_HOTEND_DRAW _MIN(HOTENDS, ((LCD_PIXEL_WIDTH - (STATUS_LOGO_BYTEWIDTH + STATUS_FAN_BYTEWIDTH) * 8) / (STATUS_HEATERS_XSPACE)))
   #define STATUS_HEATERS_BOT (STATUS_HEATERS_Y + STATUS_HEATERS_HEIGHT - 1)
+#endif
 
 #define PROGRESS_BAR_X 54
 #define PROGRESS_BAR_WIDTH (LCD_PIXEL_WIDTH - PROGRESS_BAR_X)
@@ -112,6 +128,7 @@ FORCE_INLINE void _draw_centered_temp(const int16_t temp, const uint8_t tx, cons
 
 #if DO_DRAW_HOTENDS
 
+  // Draw hotend bitmap with current and target temperatures
   FORCE_INLINE void _draw_hotend_status(const heater_ind_t heater, const bool blink) {
     #if !HEATER_IDLE_HANDLER
       UNUSED(blink);
@@ -203,8 +220,7 @@ FORCE_INLINE void _draw_centered_temp(const int16_t temp, const uint8_t tx, cons
 
     if (PAGE_UNDER(7)) {
       #if HEATER_IDLE_HANDLER
-        const bool is_idle = thermalManager.hotend_idle[heater].timed_out,
+        const bool dodraw = (blink || !thermalManager.hotend_idle[heater].timed_out);
-                   dodraw = (blink || !is_idle);
       #else
         constexpr bool dodraw = true;
       #endif
@@ -222,10 +238,11 @@ FORCE_INLINE void _draw_centered_temp(const int16_t temp, const uint8_t tx, cons
 
   }
 
-#endif // HOTENDS
+#endif // DO_DRAW_HOTENDS
 
 #if DO_DRAW_BED
 
+  // Draw bed bitmap with current and target temperatures
   FORCE_INLINE void _draw_bed_status(const bool blink) {
     #if !HEATER_IDLE_HANDLER
       UNUSED(blink);
@@ -274,8 +291,7 @@ FORCE_INLINE void _draw_centered_temp(const int16_t temp, const uint8_t tx, cons
 
     if (PAGE_UNDER(7)) {
       #if HEATER_IDLE_HANDLER
-        const bool is_idle = thermalManager.bed_idle.timed_out,
+        const bool dodraw = (blink || !thermalManager.bed_idle.timed_out);
-                   dodraw = (blink || !is_idle);
       #else
         constexpr bool dodraw = true;
       #endif
@@ -383,16 +399,19 @@ void MarlinUI::draw_status_screen() {
 
   // At the first page, generate new display values
   if (first_page) {
-    #if ANIM_HBC
+    #if ANIM_HBCC
       uint8_t new_bits = 0;
       #if ANIM_HOTEND
-        HOTEND_LOOP() if (thermalManager.isHeatingHotend(e)) SBI(new_bits, e);
+        HOTEND_LOOP() if (thermalManager.isHeatingHotend(e)) SBI(new_bits, HEATBIT_HOTEND + e);
       #endif
       #if ANIM_BED
-        if (thermalManager.isHeatingBed()) SBI(new_bits, 7);
+        if (thermalManager.isHeatingBed()) SBI(new_bits, HEATBIT_BED);
       #endif
       #if DO_DRAW_CHAMBER && HAS_HEATED_CHAMBER
-        if (thermalManager.isHeatingChamber()) SBI(new_bits, 6);
+        if (thermalManager.isHeatingChamber()) SBI(new_bits, HEATBIT_CHAMBER);
+      #endif
+      #if ANIM_CUTTER
+        if (cutter.enabled()) SBI(new_bits, HEATBIT_CUTTER);
       #endif
       heat_bits = new_bits;
     #endif
@@ -505,6 +524,18 @@ void MarlinUI::draw_status_screen() {
       u8g.drawBitmapP(STATUS_HEATERS_X, STATUS_HEATERS_Y, STATUS_HEATERS_BYTEWIDTH, STATUS_HEATERS_HEIGHT, status_heaters_bmp);
   #endif
 
+  #if DO_DRAW_CUTTER
+    #if ANIM_CUTTER
+      #define CUTTER_BITMAP(S) ((S) ? status_cutter_on_bmp : status_cutter_bmp)
+    #else
+      #define CUTTER_BITMAP(S) status_cutter_bmp
+    #endif
+    const uint8_t cuttery = STATUS_CUTTER_Y(CUTTER_ALT()),
+                  cutterh = STATUS_CUTTER_HEIGHT(CUTTER_ALT());
+    if (PAGE_CONTAINS(cuttery, cuttery + cutterh - 1))
+      u8g.drawBitmapP(STATUS_CUTTER_X, cuttery, STATUS_CUTTER_BYTEWIDTH, cutterh, CUTTER_BITMAP(CUTTER_ALT()));
+  #endif
+
   #if DO_DRAW_BED && DISABLED(STATUS_COMBINE_HEATERS)
     #if ANIM_BED
       #define BED_BITMAP(S) ((S) ? status_bed_on_bmp : status_bed_bmp)
@@ -558,16 +589,25 @@ void MarlinUI::draw_status_screen() {
   //
   if (PAGE_UNDER(6 + 1 + 12 + 1 + 6 + 1)) {
     // Extruders
-    #if HOTENDS
+    #if DO_DRAW_HOTENDS
       for (uint8_t e = 0; e < MAX_HOTEND_DRAW; ++e)
         _draw_hotend_status((heater_ind_t)e, blink);
     #endif
 
-    // Heated bed
+    // Laser / Spindle
-    #if DO_DRAW_BED && DISABLED(STATUS_COMBINE_HEATERS) || (HAS_HEATED_BED && ENABLED(STATUS_COMBINE_HEATERS) && HOTENDS <= 4)
+    #if DO_DRAW_CUTTER
+      if (cutter.power && PAGE_CONTAINS(STATUS_CUTTER_TEXT_Y - INFO_FONT_ASCENT, STATUS_CUTTER_TEXT_Y - 1)) {
+        lcd_put_u8str(STATUS_CUTTER_TEXT_X, STATUS_CUTTER_TEXT_Y, i16tostr3(cutter.powerPercent(cutter.power)));
+        lcd_put_wchar('%');
+      }
+    #endif
+
+    // Heated Bed
+    #if DO_DRAW_BED
       _draw_bed_status(blink);
     #endif
 
+    // Heated Chamber
     #if DO_DRAW_CHAMBER
       _draw_chamber_status();
     #endif