Add HMS434 V15 ATSAM board (#16620)

This commit is contained in:
MaukCC 2020-01-21 08:10:31 +01:00 committed by Scott Lahteine
parent c8ac908db2
commit 04d64351a2
6 changed files with 156 additions and 2 deletions

View File

@ -360,7 +360,8 @@
* -1 : thermocouple with AD595
* 0 : not used
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
* 331 : (3.3V scaled thermistor 1 table)
* 331 : (3.3V scaled thermistor 1 table for MEGA)
* 332 : (3.3V scaled thermistor 1 table for DUE)
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
* 3 : Mendel-parts thermistor (4.7k pullup)
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!

View File

@ -256,6 +256,7 @@
#define BOARD_ARCHIM1 3023 // UltiMachine Archim1 (with DRV8825 drivers)
#define BOARD_ARCHIM2 3024 // UltiMachine Archim2 (with TMC2130 drivers)
#define BOARD_ALLIGATOR 3025 // Alligator Board R2
#define BOARD_CNCONTROLS_15D 3026 // Cartesio CN Controls V15 on DUE
//
// SAM3X8C ARM Cortex M3

View File

@ -0,0 +1,50 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
#define OVM(V) OV((V)*(0.327/0.327))
// R25 = 100 kOhm, beta25 = 4092 K, 4.7 kOhm pull-up, bed thermistor
const short temptable_332[][2] PROGMEM = {
{ OVM( 268), 150 },
{ OVM( 293), 145 },
{ OVM( 320), 141 },
{ OVM( 379), 133 },
{ OVM( 445), 122 },
{ OVM( 516), 108 },
{ OVM( 591), 98 },
{ OVM( 665), 88 },
{ OVM( 737), 79 },
{ OVM( 801), 70 },
{ OVM( 857), 55 },
{ OVM( 903), 46 },
{ OVM( 939), 39 },
{ OVM( 954), 33 },
{ OVM( 966), 27 },
{ OVM( 977), 22 },
{ OVM( 999), 15 },
{ OVM(1004), 5 },
{ OVM(1008), 0 },
{ OVM(1012), -5 },
{ OVM(1016), -10 },
{ OVM(1020), -15 }
};

View File

@ -147,9 +147,12 @@
#if ANY_THERMISTOR_IS(201) // Pt100 with LMV324 Overlord
#include "thermistor_201.h"
#endif
#if ANY_THERMISTOR_IS(331) // Like table 1, but with 3V3 as input voltage
#if ANY_THERMISTOR_IS(331) // Like table 1, but with 3V3 as input voltage for MEGA
#include "thermistor_331.h"
#endif
#if ANY_THERMISTOR_IS(332) // Like table 1, but with 3V3 as input voltage for DUE
#include "thermistor_332.h"
#endif
#if ANY_THERMISTOR_IS(666) // beta25 = UNK, R25 = 200K, Pull-up = 10 kOhm, "Unidentified 200K NTC thermistor (Einstart S)"
#include "thermistor_666.h"
#endif

View File

@ -451,6 +451,8 @@
#include "sam/pins_ADSK.h" // SAM3X8E env:DUE env:DUE_debug
#elif MB(PRINTRBOARD_G2)
#include "sam/pins_PRINTRBOARD_G2.h" // SAM3X8C env:DUE_USB
#elif MB(CNCONTROLS_15D)
#include "sam/pins_CNCONTROLS_15D.h" // SAM3X8E env:DUE env:DUE_USB
//
// STM32 ARM Cortex-M3

View File

@ -0,0 +1,97 @@
/**
* CNControls V15 for HMS434 with DUE pin assignments
*/
#ifndef __SAM3X8E__
#error "Oops! Select 'Arduino Due' in 'Tools > Board.'"
#endif
#define BOARD_INFO_NAME "CN Controls V15D"
//
// Servos
//
#define SERVO0_PIN 6
//
// Limit Switches
//
#define X_STOP_PIN 34
#define Y_STOP_PIN 39
#define Z_STOP_PIN 62
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 49
#endif
//
// Steppers
//
#define X_STEP_PIN 14
#define X_DIR_PIN 25
#define X_ENABLE_PIN 26
#define Y_STEP_PIN 11
#define Y_DIR_PIN 12
#define Y_ENABLE_PIN 15
#define Z_STEP_PIN 24
#define Z_DIR_PIN 27
#define Z_ENABLE_PIN 28
#define E0_STEP_PIN 64
#define E0_DIR_PIN 65
#define E0_ENABLE_PIN 63
#define E1_STEP_PIN 8
#define E1_DIR_PIN 7
#define E1_ENABLE_PIN 29
//
// Temperature Sensors
// Analog Inputs
//
#define TEMP_0_PIN 1
#define TEMP_1_PIN 2
#define TEMP_BED_PIN 4
#ifndef TEMP_CHAMBER_PIN
#define TEMP_CHAMBER_PIN 5
#endif
//
// Heaters
//
#define HEATER_0_PIN 3
#define HEATER_1_PIN 4
#define HEATER_BED_PIN 32
#define HEATER_CHAMBER_PIN 33
//
// Fans
//
//#define FAN0_PIN 8
#define ORIG_E0_AUTO_FAN_PIN 30
#define ORIG_E1_AUTO_FAN_PIN 30
#define ORIG_E2_AUTO_FAN_PIN 30
#define ORIG_E3_AUTO_FAN_PIN 30
#define ORIG_CHAMBER_AUTO_FAN_PIN 10
//
// SD card
//
#define SCK_PIN 76
#define MISO_PIN 74
#define MOSI_PIN 75
#define SDSS 53
#define SD_DETECT_PIN 40
// Common I/O
//#define PWM_1_PIN 6 // probe
//#define PWM_2_PIN 13
//#define SPARE_IO 17
#define BEEPER_PIN 13
#define CALIBRATION_PIN 66
#define STAT_LED_BLUE_PIN -1
#define STAT_LED_RED_PIN 31