From 07509febcd0e4d9ad0083426faaffd113e1473ee Mon Sep 17 00:00:00 2001 From: Lino Barreca Date: Sat, 4 Jan 2020 04:01:42 +0100 Subject: [PATCH] Fix serials available on SKR Pro 1.1 (#16439) --- .../BIGTREE_SKR_PRO_1v1/PeripheralPins.c | 80 ++++++++++--------- .../variants/BIGTREE_SKR_PRO_1v1/variant.h | 32 +++++++- platformio.ini | 18 ++--- 3 files changed, 78 insertions(+), 52 deletions(-) diff --git a/buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/PeripheralPins.c b/buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/PeripheralPins.c index 2c6bd244a..971274a84 100644 --- a/buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/PeripheralPins.c +++ b/buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/PeripheralPins.c @@ -123,12 +123,18 @@ const PinMap PinMap_PWM[] = { {PE_6, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2 FAN2 {PC_9, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4 EXTENSION1-4 - //probably unused on SKR-Pro. confirmation needed, please. + /** + * Unused by specifications on SKR-Pro. + * Uncomment the corresponding line if you want to have HardwarePWM on some pins. + * WARNING: check timers' usage first to avoid conflicts. + * If you don't know what you're doing leave things as they are or you WILL break something (including hardware) + * If you alter this section DO NOT report bugs to Marlin team since they are most likely caused by you. Thank you. + */ //{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 //{PA_0, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1 - //{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 is bltouch analog? + //{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 //{PA_1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2 - //{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 is bltouch analog? + //{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 //{PA_2, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3 //{PA_2, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1 //{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 @@ -198,63 +204,63 @@ const PinMap PinMap_PWM[] = { #ifdef HAL_UART_MODULE_ENABLED const PinMap PinMap_UART_TX[] = { - {PA_0, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, - {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {PC_6, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, - {PC_10, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, - {PC_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {PC_12, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)}, - {PD_5, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, {PD_8, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + {PC_6, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, #if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio - {PG_14, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, + //{PG_14, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, #endif + //{PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, + //{PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, + //{PD_5, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, + //{PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + //{PC_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + //{PA_0, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, + //{PC_10, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, + //{PC_12, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)}, {NC, NP, 0} }; const PinMap PinMap_UART_RX[] = { - {PA_1, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, - {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {PC_7, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, - {PC_11, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, - {PC_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {PD_2, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)}, - {PD_6, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, {PD_9, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + {PC_7, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, + //{PA_1, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, + //{PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, + //{PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, + //{PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + //{PC_11, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, + //{PC_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + //{PD_2, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)}, + //{PD_6, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, #if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio - {PG_9, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, + //{PG_9, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, #endif {NC, NP, 0} }; const PinMap PinMap_UART_RTS[] = { - {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {PD_4, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PD_12, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + //{PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, + //{PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, + //{PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + //{PD_4, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, + //{PD_12, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, #if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio - {PG_8, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, - {PG_12, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, + //{PG_8, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, + //{PG_12, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, #endif {NC, NP, 0} }; const PinMap PinMap_UART_CTS[] = { - {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {PD_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PD_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + //{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, + //{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, + //{PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + //{PD_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, + //{PD_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, #if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio - {PG_13, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, - {PG_15, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, + //{PG_13, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, + //{PG_15, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, #endif {NC, NP, 0} }; diff --git a/buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/variant.h b/buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/variant.h index 55b8a60e1..171b93b31 100644 --- a/buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/variant.h +++ b/buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/variant.h @@ -232,6 +232,10 @@ extern "C" { //#define PWM_RESOLUTION 8 //#define PWM_MAX_DUTY_CYCLE 255 +// On-board LED pin number +#define LED_BUILTIN PA7 +//#define LED_GREEN LED_BUILTIN should be defined here but omitted to avoid redefinition in SailfishRGB_LED + // Below SPI and I2C definitions already done in the core // Could be redefined here if differs from the default one // SPI Definitions @@ -253,8 +257,13 @@ extern "C" { #define TIMER_SERVO TIM6 //TODO: advanced-control timers don't work // UART Definitions -// Define here Serial instance number to map on Serial generic name -#define SERIAL_UART_INSTANCE 1 //ex: 2 for Serial2 (USART2) +//#define ENABLE_HWSERIAL1 done automatically by the #define SERIAL_UART_INSTANCE below +#define ENABLE_HWSERIAL3 +#define ENABLE_HWSERIAL6 + +// Define here Serial instance number to map on Serial generic name (if not already used by SerialUSB) +#define SERIAL_UART_INSTANCE 1 //1 for Serial = Serial1 (USART1) + // DEBUG_UART could be redefined to print on another instance than 'Serial' //#define DEBUG_UART ((USART_TypeDef *) U(S)ARTX) // ex: USART3 // DEBUG_UART baudrate, default: 9600 if not defined @@ -267,6 +276,19 @@ extern "C" { #define PIN_SERIAL_RX PA10 #define PIN_SERIAL_TX PA9 +// Optional PIN_SERIALn_RX and PIN_SERIALn_TX where 'n' is the U(S)ART number +// Used when user instanciate a hardware Serial using its peripheral name. +// Example: HardwareSerial mySerial(USART3); +// will use PIN_SERIAL3_RX and PIN_SERIAL3_TX if defined. +#define PIN_SERIAL1_RX PA10 +#define PIN_SERIAL1_TX PA9 +#define PIN_SERIAL3_RX PD9 +#define PIN_SERIAL3_TX PD8 +#define PIN_SERIAL6_RX PC7 +#define PIN_SERIAL6_TX PC6 +//#define PIN_SERIALLP1_RX x // For LPUART1 RX +//#define PIN_SERIALLP1_TX x // For LPUART1 TX + #ifdef __cplusplus } // extern "C" #endif @@ -290,6 +312,8 @@ extern "C" { // // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX // pins are NOT connected to anything by default. -#define SERIAL_PORT_MONITOR Serial -#define SERIAL_PORT_HARDWARE Serial1 +#define SERIAL_PORT_MONITOR Serial +#define SERIAL_PORT_HARDWARE Serial1 +#define SERIAL_PORT_HARDWARE_OPEN Serial3 +#define SERIAL_PORT_HARDWARE_OPEN1 Serial6 #endif diff --git a/platformio.ini b/platformio.ini index 420c00229..c7b71167c 100644 --- a/platformio.ini +++ b/platformio.ini @@ -25,10 +25,10 @@ default_src_filter = + - - + extra_scripts = pre:buildroot/share/PlatformIO/scripts/common-cxxflags.py build_flags = -fmax-errors=5 -g -D__MARLIN_FIRMWARE__ -fmerge-all-constants lib_deps = + LiquidCrystal + TMCStepper@>=0.6.1,<1.0.0 + Adafruit NeoPixel U8glib-HAL=https://github.com/MarlinFirmware/U8glib-HAL/archive/bugfix.zip - LiquidCrystal@1.3.4 - TMCStepper@>=0.5.2,<1.0.0 - Adafruit NeoPixel@1.2.5 Adafruit_MAX31865=https://github.com/adafruit/Adafruit_MAX31865/archive/master.zip LiquidTWI2=https://github.com/lincomatic/LiquidTWI2/archive/master.zip Arduino-L6470=https://github.com/ameyer/Arduino-L6470/archive/dev.zip @@ -651,19 +651,15 @@ platform_packages = framework-arduinoststm32@>=3.107,<4 build_flags = ${common.build_flags} -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 -DUSB_PRODUCT=\"STM32F407ZG\" -DTARGET_STM32F4 -DSTM32F407_5ZX -DVECT_TAB_OFFSET=0x8000 - -DHAVE_HWSERIAL6 -IMarlin/src/HAL/HAL_STM32 build_unflags = -std=gnu++11 extra_scripts = pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py -lib_deps = - U8glib-HAL=https://github.com/MarlinFirmware/U8glib-HAL/archive/bugfix.zip - LiquidCrystal - TMCStepper@>=0.5.2,<1.0.0 - Adafruit NeoPixel - LiquidTWI2=https://github.com/lincomatic/LiquidTWI2/archive/master.zip - Arduino-L6470=https://github.com/ameyer/Arduino-L6470/archive/dev.zip lib_ignore = SoftwareSerial, SoftwareSerialM src_filter = ${common.default_src_filter} + +#upload_protocol = stlink +#upload_command = "$PROJECT_PACKAGES_DIR/tool-stm32duino/stlink/ST-LINK_CLI.exe" -c SWD -P "$BUILD_DIR/firmware.bin" 0x8008000 -Rst -Run +debug_tool = stlink +debug_init_break = # # BigTreeTech BTT002 (STM32F407VET6 ARM Cortex-M4)