diff --git a/buildroot/tests/LPC1768-tests b/buildroot/tests/LPC1768-tests
index 9604ca240..b8d073031 100755
--- a/buildroot/tests/LPC1768-tests
+++ b/buildroot/tests/LPC1768-tests
@@ -11,7 +11,7 @@ set -e
 #
 #restore_configs
 #opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EFB
-#exec_test $1 $2 "Default Configuration"
+#exec_test $1 $2 "Default Configuration" "$3"
 
 restore_configs
 opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EFB
@@ -21,7 +21,7 @@ exec_test $1 $2 "ReARM EFB VIKI2, SDSUPPORT, 2 Serial ports (USB CDC + UART0), N
 
 #restore_configs
 #use_example_configs Mks/Sbase
-#exec_test $1 $2 "MKS SBASE Example Config"
+#exec_test $1 $2 "MKS SBASE Example Config" "$3"
 
 restore_configs
 opt_set MOTHERBOARD BOARD_MKS_SBASE
diff --git a/buildroot/tests/LPC1769-tests b/buildroot/tests/LPC1769-tests
index e4787f82d..702f8035e 100755
--- a/buildroot/tests/LPC1769-tests
+++ b/buildroot/tests/LPC1769-tests
@@ -54,7 +54,7 @@ exec_test $1 $2 "Smoothieboard with TFTGLCD_PANEL_SPI" "$3"
 #opt_set FAN_MIN_PWM 50
 #opt_set FAN_KICKSTART_TIME 100
 #opt_set XY_FREQUENCY_LIMIT  15
-#exec_test $1 $2 "Azteeg X5 MINI WIFI Many less common options"
+#exec_test $1 $2 "Azteeg X5 MINI WIFI Many less common options" "$3"
 
 restore_configs
 use_example_configs delta/generic
diff --git a/buildroot/tests/mega1280-tests b/buildroot/tests/mega1280-tests
index 1f0676724..ac1b5f692 100644
--- a/buildroot/tests/mega1280-tests
+++ b/buildroot/tests/mega1280-tests
@@ -10,7 +10,7 @@ set -e
 # Build with the default configurations
 #
 #restore_configs
-#exec_test $1 $2 "Default Configuration"
+#exec_test $1 $2 "Default Configuration" "$3"
 
 #
 # Test MESH_BED_LEVELING feature, with LCD
diff --git a/buildroot/tests/mega2560-tests b/buildroot/tests/mega2560-tests
index 01ade8289..a968a5d21 100755
--- a/buildroot/tests/mega2560-tests
+++ b/buildroot/tests/mega2560-tests
@@ -10,7 +10,7 @@ set -e
 # Build with the default configurations
 #
 #restore_configs
-#exec_test $1 $2 "Default Configuration"
+#exec_test $1 $2 "Default Configuration" "$3"
 
 #
 # Test a probeless build of AUTO_BED_LEVELING_UBL, with lots of extruders
@@ -98,7 +98,7 @@ opt_set FIL_RUNOUT3_PIN 45
 opt_set FIL_RUNOUT3_STATE HIGH
 opt_set FIL_RUNOUT4_PIN 46
 opt_set FIL_RUNOUT5_PIN 47
-exec_test $1 $2 "Multiple runout sensors (x5) | Distinct runout states"
+exec_test $1 $2 "Multiple runout sensors (x5) | Distinct runout states" "$3"
 
 #
 # Test MINIRAMBO with PWM_MOTOR_CURRENT and many features
@@ -148,7 +148,7 @@ exec_test $1 $2 "Azteeg X3 | Mixing Extruder (x5) | Gradient Mix | Greek" "$3"
 #
 #restore_configs
 #opt_enable COREXY
-#exec_test $1 $2 "Stuff"
+#exec_test $1 $2 "Stuff" "$3"
 
 #
 # Test many less common options
@@ -181,27 +181,27 @@ exec_test $1 $2 "Mightyboard Rev. E | CoreXY, Gradient Mix | Endstop Int. | Home
 #
 #restore_configs
 #opt_enable ULTRA_LCD
-#exec_test $1 $2 "Stuff"
+#exec_test $1 $2 "Stuff" "$3"
 #
 # DOGLCD
 #
 #restore_configs
 #opt_enable DOGLCD
-#exec_test $1 $2 "Stuff"
+#exec_test $1 $2 "Stuff" "$3"
 #
 # MAKRPANEL
 # Needs to use Melzi and Sanguino hardware
 #
 #restore_configs
 #opt_enable MAKRPANEL
-#exec_test $1 $2 "Stuff"
+#exec_test $1 $2 "Stuff" "$3"
 #
 # REPRAP_DISCOUNT_SMART_CONTROLLER, SDSUPPORT, BABYSTEPPING, RIGIDBOARD_V2, and DAC_MOTOR_CURRENT_DEFAULT
 #
 #restore_configs
 #opt_set MOTHERBOARD BOARD_RIGIDBOARD_V2
 #opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT BABYSTEPPING DAC_MOTOR_CURRENT_DEFAULT
-#exec_test $1 $2 "Stuff"
+#exec_test $1 $2 "Stuff" "$3"
 # #
 # G3D_PANEL with SDCARD_SORT_ALPHA and STATUS_MESSAGE_SCROLLING
 #
@@ -211,20 +211,20 @@ exec_test $1 $2 "Mightyboard Rev. E | CoreXY, Gradient Mix | Endstop Int. | Home
 #opt_set SDSORT_USES_RAM true
 #opt_set SDSORT_USES_STACK true
 #opt_set SDSORT_CACHE_NAMES true
-#exec_test $1 $2 "Stuff"
+#exec_test $1 $2 "Stuff" "$3"
 #
 # REPRAPWORLD_KEYPAD
 #
 # Cant find configuration details to get it to compile
 #restore_configs
 #opt_enable ULTRA_LCD REPRAPWORLD_KEYPAD REPRAPWORLD_KEYPAD_MOVE_STEP
-#exec_test $1 $2 "Stuff"
+#exec_test $1 $2 "Stuff" "$3"
 #
 # RA_CONTROL_PANEL
 #
 #restore_configs
 #opt_enable RA_CONTROL_PANEL PINS_DEBUGGING
-#exec_test $1 $2 "Stuff"
+#exec_test $1 $2 "Stuff" "$3"
 
 ######## I2C LCD/PANELS ##############
 #
@@ -236,49 +236,49 @@ exec_test $1 $2 "Mightyboard Rev. E | CoreXY, Gradient Mix | Endstop Int. | Home
 #
 #restore_configs
 #opt_enable LCD_SAINSMART_I2C_1602
-#exec_test $1 $2 "Stuff"
+#exec_test $1 $2 "Stuff" "$3"
 #
 # LCD_I2C_PANELOLU2
 #
 #restore_configs
 #opt_enable LCD_I2C_PANELOLU2
-#exec_test $1 $2 "Stuff"
+#exec_test $1 $2 "Stuff" "$3"
 #
 # LCD_I2C_VIKI
 #
 #restore_configs
 #opt_enable LCD_I2C_VIKI
-#exec_test $1 $2 "Stuff"
+#exec_test $1 $2 "Stuff" "$3"
 #
 # LCM1602
 #
 #restore_configs
 #opt_enable LCM1602
-#exec_test $1 $2 "Stuff"
+#exec_test $1 $2 "Stuff" "$3"
 
 #
 # Language files test with REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
 #
 #restore_configs
 #opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT
-#for lang in an bg ca cz da de el el_gr en es eu fi fr gl hr hu it jp_kana nl pl pt pt_br ro ru sk tr uk vi zh_CN zh_TW test; do opt_set LCD_LANGUAGE $lang; echo "compile with language $lang ..."; exec_test $1 $2 "Stuff"; done
+#for lang in an bg ca cz da de el el_gr en es eu fi fr gl hr hu it jp_kana nl pl pt pt_br ro ru sk tr uk vi zh_CN zh_TW test; do opt_set LCD_LANGUAGE $lang; echo "compile with language $lang ..."; exec_test $1 $2 "Stuff" "$3"; done
 #
 #restore_configs
 #opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT
-#for lang in an bg ca cz da de el el_gr en es eu fi fr gl hr hu it jp_kana nl pl pt pt_br ro ru sk tr uk vi zh_CN zh_TW test; do opt_set LCD_LANGUAGE $lang; echo "compile with language $lang ..."; exec_test $1 $2 "Stuff"; done
+#for lang in an bg ca cz da de el el_gr en es eu fi fr gl hr hu it jp_kana nl pl pt pt_br ro ru sk tr uk vi zh_CN zh_TW test; do opt_set LCD_LANGUAGE $lang; echo "compile with language $lang ..."; exec_test $1 $2 "Stuff" "$3"; done
 
 ######## Example Configurations ##############
 #
 # Test a basic DUAL_X_CARRIAGE configuration
 #
 use_example_configs Formbot/T_Rex_3
-exec_test $1 $2 "Formbot/T_Rex_3 example configuration."
+exec_test $1 $2 "Formbot/T_Rex_3 example configuration." "$3"
 
 #
 # BQ Hephestos 2
 #restore_configs
 #use_example_configs Hephestos_2
-#exec_test $1 $2 "Stuff"
+#exec_test $1 $2 "Stuff" "$3"
 
 #
 # Delta Config (generic) + UBL + ALLEN_KEY + EEPROM_SETTINGS + OLED_PANEL_TINYBOY2
@@ -308,7 +308,7 @@ exec_test $1 $2 "RAMPS 1.3 | DELTA | FLSUN AC Config" "$3"
 # Makibox Config  need to check board type for Teensy++ 2.0
 #
 #use_example_configs makibox
-#exec_test $1 $2 "Stuff"
+#exec_test $1 $2 "Stuff" "$3"
 
 #
 # Test mixed TMC config
@@ -346,7 +346,7 @@ exec_test $1 $2 "RAMPS | SCARA | Mixed TMC | EEPROM" "$3"
 # tvrrug Config need to check board type for sanguino atmega644p
 #
 #use_example_configs tvrrug/Round2
-#exec_test $1 $2 "Stuff"
+#exec_test $1 $2 "Stuff" "$3"
 
 # clean up
 restore_configs
diff --git a/buildroot/tests/mks_robin_nano35-tests b/buildroot/tests/mks_robin_nano35-tests
index 69f370ea6..391566f6d 100644
--- a/buildroot/tests/mks_robin_nano35-tests
+++ b/buildroot/tests/mks_robin_nano35-tests
@@ -72,7 +72,7 @@ use_example_configs Mks/Robin
 opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
 opt_disable TFT_INTERFACE_FSMC TFT_RES_320x240 TOUCH_SCREEN
 opt_enable TFT_INTERFACE_SPI TFT_RES_480x320 TFT_COLOR_UI
-exec_test $1 $2 "MKS Robin v2 nano New Color UI 480x320 SPI without TOUCH_SCREEN"
+exec_test $1 $2 "MKS Robin v2 nano New Color UI 480x320 SPI without TOUCH_SCREEN" "$3"
 
 # cleanup
 restore_configs
diff --git a/buildroot/tests/mks_robin_nano35_stm32-tests b/buildroot/tests/mks_robin_nano35_stm32-tests
index 58912b85a..696fb9406 100644
--- a/buildroot/tests/mks_robin_nano35_stm32-tests
+++ b/buildroot/tests/mks_robin_nano35_stm32-tests
@@ -12,7 +12,7 @@ set -e
 #
 use_example_configs Mks/Robin
 opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO
-exec_test $1 $2 "MKS Robin nano v1.2 Emulated DOGM FSMC"
+exec_test $1 $2 "MKS Robin nano v1.2 Emulated DOGM FSMC" "$3"
 
 #
 # MKS Robin v2 nano Emulated DOGM SPI
@@ -22,7 +22,7 @@ use_example_configs Mks/Robin
 opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
 opt_disable TFT_INTERFACE_FSMC
 opt_enable TFT_INTERFACE_SPI
-exec_test $1 $2 "MKS Robin v2 nano Emulated DOGM SPI"
+exec_test $1 $2 "MKS Robin v2 nano Emulated DOGM SPI" "$3"
 
 #
 # MKS Robin nano v1.2 LVGL FSMC
@@ -31,7 +31,7 @@ exec_test $1 $2 "MKS Robin v2 nano Emulated DOGM SPI"
 # opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO
 # opt_disable TFT_CLASSIC_UI TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240
 # opt_enable TFT_LVGL_UI TFT_RES_480x320
-# exec_test $1 $2 "MKS Robin nano v1.2 LVGL FSMC"
+# exec_test $1 $2 "MKS Robin nano v1.2 LVGL FSMC" "$3"
 
 #
 # MKS Robin v2 nano LVGL SPI
@@ -41,7 +41,7 @@ exec_test $1 $2 "MKS Robin v2 nano Emulated DOGM SPI"
 # opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
 # opt_disable TFT_INTERFACE_FSMC TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240
 # opt_enable TFT_INTERFACE_SPI TFT_LVGL_UI TFT_RES_480x320
-# exec_test $1 $2 "MKS Robin v2 nano LVGL SPI"
+# exec_test $1 $2 "MKS Robin v2 nano LVGL SPI" "$3"
 
 #
 # MKS Robin v2 nano New Color UI 480x320 SPI
@@ -51,7 +51,7 @@ use_example_configs Mks/Robin
 opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
 opt_disable TFT_INTERFACE_FSMC TFT_RES_320x240
 opt_enable TFT_INTERFACE_SPI TFT_RES_480x320
-exec_test $1 $2 "MKS Robin v2 nano New Color UI 480x320 SPI"
+exec_test $1 $2 "MKS Robin v2 nano New Color UI 480x320 SPI" "$3"
 
 #
 # MKS Robin v2 nano LVGL SPI + TMC
@@ -63,7 +63,7 @@ exec_test $1 $2 "MKS Robin v2 nano New Color UI 480x320 SPI"
 # opt_enable TFT_INTERFACE_SPI TFT_LVGL_UI TFT_RES_480x320
 # opt_set X_DRIVER_TYPE TMC2209
 # opt_set Y_DRIVER_TYPE TMC2209
-# exec_test $1 $2 "MKS Robin v2 nano LVGL SPI + TMC"
+# exec_test $1 $2 "MKS Robin v2 nano LVGL SPI + TMC" "$3"
 
 # cleanup
 restore_configs
diff --git a/buildroot/tests/rambo-tests b/buildroot/tests/rambo-tests
index 231a21747..6d2ef4f58 100644
--- a/buildroot/tests/rambo-tests
+++ b/buildroot/tests/rambo-tests
@@ -68,7 +68,7 @@ opt_set MOTHERBOARD BOARD_RAMBO
 opt_set EXTRUDERS 0
 opt_set TEMP_SENSOR_BED 1
 opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
-exec_test $1 $2 "Rambo heated bed only"
+exec_test $1 $2 "Rambo heated bed only" "$3"
 
 #
 # Build with the default configurations
diff --git a/buildroot/tests/teensy41-tests b/buildroot/tests/teensy41-tests
index 135891940..682904549 100644
--- a/buildroot/tests/teensy41-tests
+++ b/buildroot/tests/teensy41-tests
@@ -48,13 +48,13 @@ exec_test $1 $2 "Sled Z Probe with Linear leveling" "$3"
 # opt_enable Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE \
 #            AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS
 # opt_set NUM_SERVOS 1
-# exec_test $1 $2 "Servo Probe"
+# exec_test $1 $2 "Servo Probe" "$3"
 #
 # ...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES
 #
 # opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS \
 #            EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES
-# exec_test $1 $2 "...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES"
+# exec_test $1 $2 "...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES" "$3"
 
 #
 # Test MAGNETIC_PARKING_EXTRUDER with no LCD
@@ -84,7 +84,7 @@ exec_test $1 $2 "Mixing Extruder" "$3"
 # opt_set EXTRUDERS 2
 # opt_set NUM_SERVOS 1
 # opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER
-# exec_test $1 $2 "SWITCHING_EXTRUDER"
+# exec_test $1 $2 "SWITCHING_EXTRUDER" "$3"
 
 #
 # Enable COREXY