diff --git a/Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h b/Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h index cae1261a8..70d502f68 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h @@ -342,7 +342,7 @@ #endif #ifndef SDCARD_CONNECTION - #define SDCARD_CONNECTION ONBOARD + #define SDCARD_CONNECTION ONBOARD #endif // @@ -352,8 +352,8 @@ // #if SD_CONNECTION_IS(LCD) - #define SD_DETECT_PIN PB10 - #define SDSS PB12 + #define SD_DETECT_PIN EXP2_04_PIN + #define SDSS EXP2_07_PIN #elif SD_CONNECTION_IS(ONBOARD) @@ -371,31 +371,63 @@ #endif /** - * ----- ----- - * NC | · · | GND 5V | · · | GND - * RESET | · · | PB10(SD_DETECT) (LCD_D7) PG5 | · · | PG6 (LCD_D6) - * (MOSI)PB15 | · · | PH10(BTN_EN2) (LCD_D5) PG7 | · · | PG8 (LCD_D4) - * (SD_SS)PB12 | · · | PD10(BTN_EN1) (LCD_RS) PA8 | · · | PC10 (LCD_EN) - * (SCK)PB13 | · · | PB14(MISO) (BTN_ENC) PA15 | · · | PC11 (BEEPER) - * ----- ----- - * EXP2 EXP1 + * ------ ------ + * NC | 1 2 | GND 5V | 1 2 | GND + * RESET | 3 4 | PB10 (SD_DETECT) (LCD_D7) PG5 | 3 4 | PG6 (LCD_D6) + * (MOSI) PB15 | 5 6 | PH10 (BTN_EN2) (LCD_D5) PG7 | 5 6 | PG8 (LCD_D4) + * (SD_SS) PB12 | 7 8 | PD10 (BTN_EN1) (LCD_RS) PA8 | 7 8 | PC10 (LCD_EN) + * (SCK) PB13 | 9 10 | PB14 (MISO) (BTN_ENC) PA15 | 9 10 | PC11 (BEEPER) + * ------ ------ + * EXP2 EXP1 */ +#define EXP1_03_PIN PG5 +#define EXP1_04_PIN PG6 +#define EXP1_05_PIN PG7 +#define EXP1_06_PIN PG8 +#define EXP1_07_PIN PA8 +#define EXP1_08_PIN PC10 +#define EXP1_09_PIN PA15 +#define EXP1_10_PIN PC11 + +#define EXP2_04_PIN PB10 +#define EXP2_05_PIN PB15 +#define EXP2_06_PIN PH10 +#define EXP2_07_PIN PB12 +#define EXP2_08_PIN PD10 +#define EXP2_09_PIN PB13 +#define EXP2_10_PIN PB14 // // LCDs and Controllers // -#if HAS_WIRED_LCD - #define BEEPER_PIN PC11 - #define BTN_ENC PA15 +#if ANY(TFT_COLOR_UI, TFT_LVGL_UI, TFT_CLASSIC_UI) + + #define TFT_CS_PIN EXP2_07_PIN + #define TFT_A0_PIN EXP2_04_PIN + #define TFT_SCK_PIN EXP2_09_PIN + #define TFT_MISO_PIN EXP2_10_PIN + #define TFT_MOSI_PIN EXP2_05_PIN + + #define TOUCH_INT_PIN EXP1_04_PIN + #define TOUCH_MISO_PIN EXP1_05_PIN + #define TOUCH_MOSI_PIN EXP1_08_PIN + #define TOUCH_SCK_PIN EXP1_06_PIN + #define TOUCH_CS_PIN EXP1_07_PIN + #define BTN_EN1 EXP2_08_PIN + #define BTN_EN2 EXP2_06_PIN + +#elif HAS_WIRED_LCD + #define BEEPER_PIN EXP1_10_PIN + #define BTN_ENC EXP1_09_PIN #if ENABLED(CR10_STOCKDISPLAY) - #define LCD_PINS_RS PG6 + #define LCD_PINS_RS EXP1_04_PIN - #define BTN_EN1 PC10 - #define BTN_EN2 PG8 + #define BTN_EN1 EXP1_08_PIN + #define BTN_EN2 EXP1_06_PIN - #define LCD_PINS_ENABLE PG5 - #define LCD_PINS_D4 PG7 + #define LCD_PINS_ENABLE EXP1_03_PIN + #define LCD_PINS_D4 EXP1_05_PIN // CR10_STOCKDISPLAY default timing is too fast #undef BOARD_ST7920_DELAY_1 @@ -403,53 +435,53 @@ #undef BOARD_ST7920_DELAY_3 #elif ENABLED(MKS_MINI_12864) - #define DOGLCD_A0 PG6 - #define DOGLCD_CS PG7 - #define BTN_EN1 PD10 - #define BTN_EN2 PH10 + #define DOGLCD_A0 EXP1_04_PIN + #define DOGLCD_CS EXP1_05_PIN + #define BTN_EN1 EXP2_08_PIN + #define BTN_EN2 EXP2_06_PIN #if SD_CONNECTION_IS(ONBOARD) #define SOFTWARE_SPI #endif #else - #define LCD_PINS_RS PA8 + #define LCD_PINS_RS EXP1_07_PIN - #define BTN_EN1 PD10 - #define BTN_EN2 PH10 + #define BTN_EN1 EXP2_08_PIN + #define BTN_EN2 EXP2_06_PIN - #define LCD_PINS_ENABLE PC10 - #define LCD_PINS_D4 PG8 + #define LCD_PINS_ENABLE EXP1_08_PIN + #define LCD_PINS_D4 EXP1_06_PIN #if ENABLED(FYSETC_MINI_12864) - #define DOGLCD_CS PC10 - #define DOGLCD_A0 PA8 + #define DOGLCD_CS EXP1_08_PIN + #define DOGLCD_A0 EXP1_07_PIN #if SD_CONNECTION_IS(ONBOARD) #define SOFTWARE_SPI #endif //#define LCD_BACKLIGHT_PIN -1 - #define LCD_RESET_PIN PG8 // Must be high or open for LCD to operate normally. + #define LCD_RESET_PIN EXP1_06_PIN // Must be high or open for LCD to operate normally. #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) #ifndef RGB_LED_R_PIN - #define RGB_LED_R_PIN PG7 + #define RGB_LED_R_PIN EXP1_05_PIN #endif #ifndef RGB_LED_G_PIN - #define RGB_LED_G_PIN PG6 + #define RGB_LED_G_PIN EXP1_04_PIN #endif #ifndef RGB_LED_B_PIN - #define RGB_LED_B_PIN PG5 + #define RGB_LED_B_PIN EXP1_03_PIN #endif #elif ENABLED(FYSETC_MINI_12864_2_1) - #define NEOPIXEL_PIN PG7 + #define NEOPIXEL_PIN EXP1_05_PIN #endif #endif // !FYSETC_MINI_12864 #if IS_ULTIPANEL - #define LCD_PINS_D5 PG7 - #define LCD_PINS_D6 PG6 - #define LCD_PINS_D7 PG5 + #define LCD_PINS_D5 EXP1_05_PIN + #define LCD_PINS_D6 EXP1_04_PIN + #define LCD_PINS_D7 EXP1_03_PIN #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder diff --git a/Marlin/src/pins/stm32f4/pins_BTT_SKR_V2_0_common.h b/Marlin/src/pins/stm32f4/pins_BTT_SKR_V2_0_common.h index b88e598e6..14cc04764 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_SKR_V2_0_common.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_SKR_V2_0_common.h @@ -200,9 +200,9 @@ #if HOTENDS == 1 #if TEMP_SENSOR_PROBE - #define TEMP_PROBE_PIN TEMP_1_PIN + #define TEMP_PROBE_PIN TEMP_1_PIN #elif TEMP_SENSOR_CHAMBER - #define TEMP_CHAMBER_PIN TEMP_1_PIN + #define TEMP_CHAMBER_PIN TEMP_1_PIN #endif #endif @@ -288,7 +288,7 @@ // SD Connection // #ifndef SDCARD_CONNECTION - #define SDCARD_CONNECTION LCD + #define SDCARD_CONNECTION LCD #endif /**