M16 - Expected Printer Check (#14924)
This commit is contained in:
parent
a26b57a36d
commit
0fbb26c28f
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -342,6 +342,10 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
|
||||
case 12: M12(); break; // M12: Synchronize and optionally force a CLC set
|
||||
#endif
|
||||
|
||||
#if ENABLED(EXPECTED_PRINTER_CHECK)
|
||||
case 16: M16(); break; // M16: Expected printer check
|
||||
#endif
|
||||
|
||||
case 17: M17(); break; // M17: Enable all stepper motors
|
||||
|
||||
#if ENABLED(SDSUPPORT)
|
||||
|
@ -83,6 +83,7 @@
|
||||
* M8 - Turn flood coolant ON. (Requires COOLANT_CONTROL)
|
||||
* M9 - Turn coolant OFF. (Requires COOLANT_CONTROL)
|
||||
* M12 - Set up closed loop control system. (Requires EXTERNAL_CLOSED_LOOP_CONTROLLER)
|
||||
* M16 - Expected printer check. (Requires EXPECTED_PRINTER_CHECK)
|
||||
* M17 - Enable/Power all stepper motors
|
||||
* M18 - Disable all stepper motors; same as M84
|
||||
* M20 - List SD card. (Requires SDSUPPORT)
|
||||
@ -472,6 +473,10 @@ private:
|
||||
static void M12();
|
||||
#endif
|
||||
|
||||
#if ENABLED(EXPECTED_PRINTER_CHECK)
|
||||
static void M16();
|
||||
#endif
|
||||
|
||||
static void M17();
|
||||
|
||||
static void M18_M84();
|
||||
|
40
Marlin/src/gcode/host/M16.cpp
Normal file
40
Marlin/src/gcode/host/M16.cpp
Normal file
@ -0,0 +1,40 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
#include "../../inc/MarlinConfigPre.h"
|
||||
|
||||
#if ENABLED(EXPECTED_PRINTER_CHECK)
|
||||
|
||||
#include "../gcode.h"
|
||||
#include "../../Marlin.h"
|
||||
|
||||
/**
|
||||
* M16: Expected Printer Check
|
||||
*/
|
||||
void GcodeSuite::M16() {
|
||||
|
||||
if (strcmp_P(parser.string_arg, PSTR(MACHINE_NAME)))
|
||||
kill(PSTR(MSG_EXPECTED_PRINTER));
|
||||
|
||||
}
|
||||
|
||||
#endif
|
@ -225,6 +225,9 @@ void GCodeParser::parse(char *p) {
|
||||
case 810: case 811: case 812: case 813: case 814:
|
||||
case 815: case 816: case 817: case 818: case 819:
|
||||
#endif
|
||||
#if ENABLED(EXPECTED_PRINTER_CHECK)
|
||||
case 16:
|
||||
#endif
|
||||
case 23: case 28: case 30: case 117: case 118: case 928: string_arg = p; return;
|
||||
default: break;
|
||||
}
|
||||
|
@ -144,3 +144,4 @@
|
||||
#define MSG_DELTA_CALIBRATE_Y _UxGT("Калибровка Y")
|
||||
#define MSG_DELTA_CALIBRATE_Z _UxGT("Калибровка Z")
|
||||
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Калибровка Център")
|
||||
#define MSG_EXPECTED_PRINTER _UxGT("Неправилен принтер")
|
||||
|
@ -231,6 +231,8 @@
|
||||
#define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM Write")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Repren impressió")
|
||||
|
||||
#define MSG_EXPECTED_PRINTER _UxGT("Impressora incorrecta")
|
||||
|
||||
//
|
||||
// Filament Change screens show up to 3 lines on a 4-line display
|
||||
// ...or up to 2 lines on a 3-line display
|
||||
|
@ -495,6 +495,8 @@
|
||||
#define MSG_SNAKE _UxGT("Sn4k3")
|
||||
#define MSG_MAZE _UxGT("Bludiště")
|
||||
|
||||
#define MSG_EXPECTED_PRINTER _UxGT("Nesprávná tiskárna")
|
||||
|
||||
#if LCD_HEIGHT >= 4
|
||||
// Up to 3 lines allowed
|
||||
#define MSG_ADVANCED_PAUSE_WAITING_1 _UxGT("Stikněte tlačítko")
|
||||
|
@ -229,6 +229,8 @@
|
||||
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Forsæt print")
|
||||
|
||||
#define MSG_EXPECTED_PRINTER _UxGT("Forkert printer")
|
||||
|
||||
#if LCD_HEIGHT >= 4
|
||||
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Vent på start")
|
||||
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("af filament")
|
||||
|
@ -409,6 +409,8 @@
|
||||
#define MSG_CASE_LIGHT _UxGT("Beleuchtung")
|
||||
#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Helligkeit")
|
||||
|
||||
#define MSG_EXPECTED_PRINTER _UxGT("Falscher Drucker")
|
||||
|
||||
#if LCD_WIDTH >= 20
|
||||
#define MSG_INFO_PRINT_COUNT _UxGT("Gesamte Drucke")
|
||||
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Komplette Drucke")
|
||||
|
@ -185,3 +185,5 @@
|
||||
#define MSG_DELTA_CALIBRATE_Y _UxGT("Βαθμονόμηση Y")
|
||||
#define MSG_DELTA_CALIBRATE_Z _UxGT("Βαθμονόμηση Z")
|
||||
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Βαθμονόμηση κέντρου")
|
||||
|
||||
#define MSG_EXPECTED_PRINTER _UxGT("Εσφαλμένος εκτυπωτής")
|
||||
|
@ -186,3 +186,5 @@
|
||||
#define MSG_DELTA_CALIBRATE_Y _UxGT("Βαθμονόμηση Y")
|
||||
#define MSG_DELTA_CALIBRATE_Z _UxGT("Βαθμονόμηση Z")
|
||||
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Βαθμονόμηση κέντρου")
|
||||
|
||||
#define MSG_EXPECTED_PRINTER _UxGT("Εσφαλμένος εκτυπωτής")
|
||||
|
@ -1164,6 +1164,11 @@
|
||||
#ifndef MSG_CASE_LIGHT_BRIGHTNESS
|
||||
#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Light Brightness")
|
||||
#endif
|
||||
|
||||
#ifndef MSG_EXPECTED_PRINTER
|
||||
#define MSG_EXPECTED_PRINTER _UxGT("INCORRECT PRINTER")
|
||||
#endif
|
||||
|
||||
#if LCD_WIDTH >= 20
|
||||
#ifndef MSG_INFO_PRINT_COUNT
|
||||
#define MSG_INFO_PRINT_COUNT _UxGT("Print Count")
|
||||
|
@ -204,6 +204,8 @@
|
||||
#define MSG_INFO_PROTOCOL _UxGT("Protocolo")
|
||||
#define MSG_CASE_LIGHT _UxGT("Luz cabina")
|
||||
|
||||
#define MSG_EXPECTED_PRINTER _UxGT("Impresora incorrecta")
|
||||
|
||||
#if LCD_WIDTH >= 20
|
||||
#define MSG_INFO_PRINT_COUNT _UxGT("Conteo de impresión")
|
||||
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Completadas")
|
||||
|
@ -354,6 +354,9 @@
|
||||
#define MSG_ERR_HOMING_FAILED _UxGT("Hasi. huts egin du")
|
||||
#define MSG_ERR_PROBING_FAILED _UxGT("Neurketak huts egin du")
|
||||
#define MSG_M600_TOO_COLD _UxGT("M600: hotzegi")
|
||||
|
||||
#define MSG_EXPECTED_PRINTER _UxGT("Inprimagailu okerra")
|
||||
|
||||
//
|
||||
// Filament Change screens show up to 3 lines on a 4-line display
|
||||
// ...or up to 2 lines on a 3-line display
|
||||
|
@ -168,3 +168,5 @@
|
||||
#define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibroi Y")
|
||||
#define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibroi Z")
|
||||
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibroi Center")
|
||||
|
||||
#define MSG_EXPECTED_PRINTER _UxGT("Väärä tulostin")
|
||||
|
@ -409,6 +409,8 @@
|
||||
#define MSG_CASE_LIGHT _UxGT("Lumière caisson")
|
||||
#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Luminosité")
|
||||
|
||||
#define MSG_EXPECTED_PRINTER _UxGT("Imprimante incorrecte")
|
||||
|
||||
#if LCD_WIDTH >= 20
|
||||
#define MSG_INFO_PRINT_COUNT _UxGT("Nbre impressions")
|
||||
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Terminées")
|
||||
|
@ -225,6 +225,8 @@
|
||||
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Segue traballo")
|
||||
|
||||
#define MSG_EXPECTED_PRINTER _UxGT("Impresora incorrecta")
|
||||
|
||||
#if LCD_HEIGHT >= 4
|
||||
// Up to 3 lines allowed
|
||||
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Agarde para")
|
||||
|
@ -204,6 +204,8 @@
|
||||
#define MSG_INFO_PROTOCOL _UxGT("Protokol")
|
||||
#define MSG_CASE_LIGHT _UxGT("Osvjetljenje")
|
||||
|
||||
#define MSG_EXPECTED_PRINTER _UxGT("Neispravan pisač")
|
||||
|
||||
#if LCD_WIDTH >= 20
|
||||
#define MSG_INFO_PRINT_COUNT _UxGT("Broj printova")
|
||||
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Završeni")
|
||||
|
@ -494,6 +494,8 @@
|
||||
#define MSG_SNAKE _UxGT("Sn4k3")
|
||||
#define MSG_MAZE _UxGT("Maze")
|
||||
|
||||
#define MSG_EXPECTED_PRINTER _UxGT("Stampante errata")
|
||||
|
||||
//
|
||||
// Le schermate di Cambio Filamento possono visualizzare fino a 3 linee su un display a 4 righe
|
||||
// ...o fino a 2 linee su un display a 3 righe.
|
||||
|
@ -219,3 +219,5 @@
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("シバラクオマチクダサイ") // "filament load"
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("プリントヲサイカイシマス") // "Wait for print"
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("シバラクオマチクダサイ") // "to resume"
|
||||
|
||||
#define MSG_EXPECTED_PRINTER _UxGT("間違ったプリンター") // "Wrong printer"
|
||||
|
@ -346,6 +346,9 @@
|
||||
//#define MSG_INFO_PROTOCOL _UxGT("Protocol")
|
||||
//#define MSG_CASE_LIGHT _UxGT("Case light")
|
||||
//#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Light Brightness")
|
||||
|
||||
#define MSG_EXPECTED_PRINTER _UxGT("잘못된 프린터")
|
||||
|
||||
#if LCD_WIDTH >= 20
|
||||
//#define MSG_INFO_PRINT_COUNT _UxGT("Print Count")
|
||||
//#define MSG_INFO_COMPLETED_PRINTS _UxGT("Completed")
|
||||
|
@ -216,6 +216,8 @@
|
||||
#define MSG_INFO_PROTOCOL _UxGT("Protocol")
|
||||
#define MSG_CASE_LIGHT _UxGT("Case licht")
|
||||
|
||||
#define MSG_EXPECTED_PRINTER _UxGT("Onjuiste printer")
|
||||
|
||||
#if LCD_WIDTH >= 20
|
||||
#define MSG_INFO_PRINT_COUNT _UxGT("Printed Aantal")
|
||||
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Totaal Voltooid")
|
||||
|
@ -204,6 +204,8 @@
|
||||
#define MSG_INFO_PROTOCOL _UxGT("Protokół")
|
||||
#define MSG_CASE_LIGHT _UxGT("Oświetlenie")
|
||||
|
||||
#define MSG_EXPECTED_PRINTER _UxGT("Niepoprawna drukarka")
|
||||
|
||||
#if LCD_WIDTH >= 20
|
||||
#define MSG_INFO_PRINT_COUNT _UxGT("Wydrukowano")
|
||||
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Ukończono")
|
||||
|
@ -366,6 +366,8 @@
|
||||
#define MSG_CASE_LIGHT _UxGT("Luz da Impressora")
|
||||
#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Intensidade Brilho")
|
||||
|
||||
#define MSG_EXPECTED_PRINTER _UxGT("Impressora Incorreta")
|
||||
|
||||
#if LCD_WIDTH >= 20
|
||||
#define MSG_INFO_PRINT_COUNT _UxGT("Total de Impressões")
|
||||
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Realizadas")
|
||||
|
@ -185,3 +185,5 @@
|
||||
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibrar Centro")
|
||||
|
||||
#define MSG_LCD_ENDSTOPS _UxGT("Fim de curso")
|
||||
|
||||
#define MSG_EXPECTED_PRINTER _UxGT("Impressora Incorreta")
|
||||
|
@ -372,6 +372,9 @@
|
||||
#define MSG_INFO_PROTOCOL _UxGT("Протокол")
|
||||
#define MSG_CASE_LIGHT _UxGT("Подсветка корпуса")
|
||||
#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Яркость подсветки")
|
||||
|
||||
#define MSG_EXPECTED_PRINTER _UxGT("Неверный принтер")
|
||||
|
||||
#if LCD_WIDTH >= 20
|
||||
#define MSG_INFO_PRINT_COUNT _UxGT("Счётчик печати")
|
||||
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Закончено")
|
||||
|
@ -415,6 +415,8 @@
|
||||
#define MSG_CASE_LIGHT _UxGT("Osvetlenie")
|
||||
#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Jas svetla")
|
||||
|
||||
#define MSG_EXPECTED_PRINTER _UxGT("Nesprávna tlačiareň")
|
||||
|
||||
#if LCD_WIDTH >= 20
|
||||
#define MSG_INFO_PRINT_COUNT _UxGT("Počet tlačí")
|
||||
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Dokončené")
|
||||
|
@ -362,6 +362,9 @@
|
||||
#define MSG_INFO_PROTOCOL _UxGT("Protokol")
|
||||
#define MSG_CASE_LIGHT _UxGT("Aydınlatmayı Aç")
|
||||
#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Aydınlatma Parlaklğı")
|
||||
|
||||
#define MSG_EXPECTED_PRINTER _UxGT("Yanlış Yazıcı")
|
||||
|
||||
#if LCD_WIDTH >= 20
|
||||
#define MSG_INFO_PRINT_COUNT _UxGT("Baskı Sayısı")
|
||||
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Tamamlanan")
|
||||
|
@ -192,6 +192,8 @@
|
||||
#define MSG_INFO_PROTOCOL _UxGT("Протокол")
|
||||
#define MSG_CASE_LIGHT _UxGT("Підсвітка")
|
||||
|
||||
#define MSG_EXPECTED_PRINTER _UxGT("Неправильний принтер")
|
||||
|
||||
#if LCD_WIDTH >= 20
|
||||
#define MSG_INFO_PRINT_COUNT _UxGT("К-сть друків")
|
||||
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Завершено")
|
||||
|
@ -323,6 +323,8 @@
|
||||
#define MSG_CASE_LIGHT _UxGT("外壳灯") // "Case light"
|
||||
#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("灯亮度") // "Light BRIGHTNESS"
|
||||
|
||||
#define MSG_EXPECTED_PRINTER _UxGT("打印机不正确") // "The printer is incorrect"
|
||||
|
||||
#if LCD_WIDTH >= 20
|
||||
#define MSG_INFO_PRINT_COUNT _UxGT("打印计数") //"Print Count"
|
||||
#define MSG_INFO_COMPLETED_PRINTS _UxGT("完成了") //"Completed"
|
||||
|
@ -323,6 +323,8 @@
|
||||
#define MSG_CASE_LIGHT _UxGT("外殼燈") // "Case light"
|
||||
#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("燈亮度") // "Light BRIGHTNESS"
|
||||
|
||||
#define MSG_EXPECTED_PRINTER _UxGT("打印機不正確") // "The printer is incorrect"
|
||||
|
||||
#if LCD_WIDTH >= 20
|
||||
#define MSG_INFO_PRINT_COUNT _UxGT("列印計數") //"Print Count"
|
||||
#define MSG_INFO_COMPLETED_PRINTS _UxGT("已完成") //"Completed"
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2244,6 +2244,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2244,6 +2244,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2246,6 +2246,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2250,6 +2250,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2245,6 +2245,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2241,6 +2241,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2241,6 +2241,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2241,6 +2241,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2241,6 +2241,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2244,6 +2244,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2246,6 +2246,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2246,6 +2246,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2241,6 +2241,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
//#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2247,6 +2247,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2247,6 +2247,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2243,6 +2243,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2242,6 +2242,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2241,6 +2241,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
@ -2238,6 +2238,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue
Block a user