Remove "ubl." prefix from calls within ubl method

This commit is contained in:
Scott Lahteine 2017-05-16 01:19:31 -05:00
parent 14a4257c7b
commit 0fef9a2983

View File

@ -1152,17 +1152,17 @@
say_ubl_name();
SERIAL_PROTOCOLPGM("System Version " UBL_VERSION " ");
if (ubl.state.active)
if (state.active)
SERIAL_PROTOCOLCHAR('A');
else
SERIAL_PROTOCOLPGM("Ina");
SERIAL_PROTOCOLLNPGM("ctive.\n");
safe_delay(50);
if (ubl.state.eeprom_storage_slot == -1)
if (state.eeprom_storage_slot == -1)
SERIAL_PROTOCOLPGM("No Mesh Loaded.");
else {
SERIAL_PROTOCOLPAIR("Mesh ", ubl.state.eeprom_storage_slot);
SERIAL_PROTOCOLPAIR("Mesh ", state.eeprom_storage_slot);
SERIAL_PROTOCOLPGM(" Loaded.");
}
SERIAL_EOL;
@ -1179,7 +1179,7 @@
SERIAL_PROTOCOL_F(zprobe_zoffset, 7);
SERIAL_EOL;
SERIAL_PROTOCOLLNPAIR("ubl.eeprom_start=", hex_address((void*)ubl.eeprom_start));
SERIAL_PROTOCOLLNPAIR("ubl.eeprom_start=", hex_address((void*)eeprom_start));
SERIAL_ECHOLNPAIR("GRID_MAX_POINTS_X ", GRID_MAX_POINTS_X);
SERIAL_ECHOLNPAIR("GRID_MAX_POINTS_Y ", GRID_MAX_POINTS_Y);
@ -1191,7 +1191,7 @@
SERIAL_PROTOCOLPGM("X-Axis Mesh Points at: ");
for (uint8_t i = 0; i < GRID_MAX_POINTS_X; i++) {
SERIAL_PROTOCOL_F(LOGICAL_X_POSITION(pgm_read_float(&ubl.mesh_index_to_xpos[i])), 3);
SERIAL_PROTOCOL_F(LOGICAL_X_POSITION(pgm_read_float(&mesh_index_to_xpos[i])), 3);
SERIAL_PROTOCOLPGM(" ");
safe_delay(25);
}
@ -1199,26 +1199,26 @@
SERIAL_PROTOCOLPGM("Y-Axis Mesh Points at: ");
for (uint8_t i = 0; i < GRID_MAX_POINTS_Y; i++) {
SERIAL_PROTOCOL_F(LOGICAL_Y_POSITION(pgm_read_float(&ubl.mesh_index_to_ypos[i])), 3);
SERIAL_PROTOCOL_F(LOGICAL_Y_POSITION(pgm_read_float(&mesh_index_to_ypos[i])), 3);
SERIAL_PROTOCOLPGM(" ");
safe_delay(25);
}
SERIAL_EOL;
SERIAL_PROTOCOLLNPAIR("Free EEPROM space starts at: ", hex_address((void*)ubl.eeprom_start));
SERIAL_PROTOCOLLNPAIR("Free EEPROM space starts at: ", hex_address((void*)eeprom_start));
SERIAL_PROTOCOLLNPAIR("end of EEPROM: ", hex_address((void*)E2END));
safe_delay(25);
SERIAL_PROTOCOLPAIR("sizeof(ubl.state) : ", (int)sizeof(ubl.state));
SERIAL_PROTOCOLPAIR("sizeof(ubl.state) : ", (int)sizeof(state));
SERIAL_EOL;
SERIAL_PROTOCOLLNPAIR("z_value[][] size: ", (int)sizeof(ubl.z_values));
SERIAL_PROTOCOLLNPAIR("z_value[][] size: ", (int)sizeof(z_values));
SERIAL_EOL;
safe_delay(25);
SERIAL_PROTOCOLLNPAIR("EEPROM free for UBL: ", hex_address((void*)k));
safe_delay(25);
SERIAL_PROTOCOLPAIR("EEPROM can hold ", k / sizeof(ubl.z_values));
SERIAL_PROTOCOLPAIR("EEPROM can hold ", k / sizeof(z_values));
SERIAL_PROTOCOLLNPGM(" meshes.\n");
safe_delay(25);
@ -1239,7 +1239,7 @@
SERIAL_ECHOLNPAIR("=", UBL_MESH_MAX_Y);
safe_delay(25);
if (!ubl.sanity_check()) {
if (!sanity_check()) {
say_ubl_name();
SERIAL_PROTOCOLLNPGM("sanity checks passed.");
}
@ -1554,11 +1554,11 @@
SERIAL_ECHOPGM(") measured: ");
SERIAL_PROTOCOL_F(measured_z, 7);
SERIAL_ECHOPGM(" correction: ");
SERIAL_PROTOCOL_F(ubl.get_z_correction(LOGICAL_X_POSITION(x), LOGICAL_Y_POSITION(y)), 7);
SERIAL_PROTOCOL_F(get_z_correction(LOGICAL_X_POSITION(x), LOGICAL_Y_POSITION(y)), 7);
}
#endif
measured_z -= ubl.get_z_correction(LOGICAL_X_POSITION(x), LOGICAL_Y_POSITION(y)) /* + zprobe_zoffset */ ;
measured_z -= get_z_correction(LOGICAL_X_POSITION(x), LOGICAL_Y_POSITION(y)) /* + zprobe_zoffset */ ;
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
@ -1605,9 +1605,9 @@
for (uint8_t i = 0; i < GRID_MAX_POINTS_X; i++) {
for (uint8_t j = 0; j < GRID_MAX_POINTS_Y; j++) {
float x_tmp = pgm_read_float(&ubl.mesh_index_to_xpos[i]),
y_tmp = pgm_read_float(&ubl.mesh_index_to_ypos[j]),
z_tmp = ubl.z_values[i][j];
float x_tmp = pgm_read_float(&mesh_index_to_xpos[i]),
y_tmp = pgm_read_float(&mesh_index_to_ypos[j]),
z_tmp = z_values[i][j];
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
@ -1637,7 +1637,7 @@
}
#endif
ubl.z_values[i][j] += z_tmp - lsf_results.D;
z_values[i][j] += z_tmp - lsf_results.D;
}
}