CMS/Marlin
3
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Multi-Volume. Select Media for LVGL (#21344)

Browse Source
This commit is contained in:
Victor Oliveira 2021-04-13 19:34:19 -03:00 committed by Scott Lahteine
parent 02a99e3f0b
commit 107dd313bd
29 changed files with 546 additions and 279 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
Marlin/Configuration_adv.h
View File

@ -1478,6 +1478,15 @@
// Enable if SD detect is rendered useless (e.g., by using an SD extender) // Enable if SD detect is rendered useless (e.g., by using an SD extender)
//#define NO_SD_DETECT //#define NO_SD_DETECT
// Multiple volume support - EXPERIMENTAL.
//#define MULTI_VOLUME
#if ENABLED(MULTI_VOLUME)
#define VOLUME_SD_ONBOARD
#define VOLUME_USB_FLASH_DRIVE
#define DEFAULT_VOLUME SD_ONBOARD
#define DEFAULT_SHARED_VOLUME USB_FLASH_DRIVE
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

18
Marlin/src/HAL/DUE/usb/sd_mmc_spi_mem.cpp
View File

@ -32,7 +32,7 @@ Ctrl_status sd_mmc_spi_test_unit_ready() {
Ctrl_status sd_mmc_spi_read_capacity(uint32_t *nb_sector) { Ctrl_status sd_mmc_spi_read_capacity(uint32_t *nb_sector) {
if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.isMounted()) if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.isMounted())
return CTRL_NO_PRESENT; return CTRL_NO_PRESENT;
*nb_sector = card.getSd2Card().cardSize() - 1; *nb_sector = card.diskIODriver()->cardSize() - 1;
return CTRL_GOOD; return CTRL_GOOD;
} }
@ -74,24 +74,24 @@ Ctrl_status sd_mmc_spi_usb_read_10(uint32_t addr, uint16_t nb_sector) {
#endif #endif
// Start reading // Start reading
if (!card.getSd2Card().readStart(addr)) if (!card.diskIODriver()->readStart(addr))
return CTRL_FAIL; return CTRL_FAIL;
// For each specified sector // For each specified sector
while (nb_sector--) { while (nb_sector--) {
// Read a sector // Read a sector
card.getSd2Card().readData(sector_buf); card.diskIODriver()->readData(sector_buf);
// RAM -> USB // RAM -> USB
if (!udi_msc_trans_block(true, sector_buf, SD_MMC_BLOCK_SIZE, nullptr)) { if (!udi_msc_trans_block(true, sector_buf, SD_MMC_BLOCK_SIZE, nullptr)) {
card.getSd2Card().readStop(); card.diskIODriver()->readStop();
return CTRL_FAIL; return CTRL_FAIL;
} }
} }
// Stop reading // Stop reading
card.getSd2Card().readStop(); card.diskIODriver()->readStop();
// Done // Done
return CTRL_GOOD; return CTRL_GOOD;
@ -113,7 +113,7 @@ Ctrl_status sd_mmc_spi_usb_write_10(uint32_t addr, uint16_t nb_sector) {
} }
#endif #endif
if (!card.getSd2Card().writeStart(addr, nb_sector)) if (!card.diskIODriver()->writeStart(addr, nb_sector))
return CTRL_FAIL; return CTRL_FAIL;
// For each specified sector // For each specified sector
@ -121,16 +121,16 @@ Ctrl_status sd_mmc_spi_usb_write_10(uint32_t addr, uint16_t nb_sector) {
// USB -> RAM // USB -> RAM
if (!udi_msc_trans_block(false, sector_buf, SD_MMC_BLOCK_SIZE, nullptr)) { if (!udi_msc_trans_block(false, sector_buf, SD_MMC_BLOCK_SIZE, nullptr)) {
card.getSd2Card().writeStop(); card.diskIODriver()->writeStop();
return CTRL_FAIL; return CTRL_FAIL;
} }
// Write a sector // Write a sector
card.getSd2Card().writeData(sector_buf); card.diskIODriver()->writeData(sector_buf);
} }
// Stop writing // Stop writing
card.getSd2Card().writeStop(); card.diskIODriver()->writeStop();
// Done // Done
return CTRL_GOOD; return CTRL_GOOD;

38
Marlin/src/HAL/STM32/msc_sd.cpp
View File

@ -30,54 +30,66 @@
class Sd2CardUSBMscHandler : public USBMscHandler { class Sd2CardUSBMscHandler : public USBMscHandler {
public: public:
DiskIODriver* diskIODriver() {
#if ENABLED(MULTI_VOLUME)
#if SHARED_VOLUME_IS(SD_ONBOARD)
return &card.media_sd_spi;
#elif SHARED_VOLUME_IS(USB_FLASH_DRIVE)
return &card.media_usbFlashDrive;
#endif
#else
return diskIODriver();
#endif
}
bool GetCapacity(uint32_t *pBlockNum, uint16_t *pBlockSize) { bool GetCapacity(uint32_t *pBlockNum, uint16_t *pBlockSize) {
*pBlockNum = card.getSd2Card().cardSize(); *pBlockNum = diskIODriver()->cardSize();
*pBlockSize = BLOCK_SIZE; *pBlockSize = BLOCK_SIZE;
return true; return true;
} }
bool Write(uint8_t *pBuf, uint32_t blkAddr, uint16_t blkLen) { bool Write(uint8_t *pBuf, uint32_t blkAddr, uint16_t blkLen) {
auto sd2card = card.getSd2Card(); auto sd2card = diskIODriver();
// single block // single block
if (blkLen == 1) { if (blkLen == 1) {
watchdog_refresh(); watchdog_refresh();
sd2card.writeBlock(blkAddr, pBuf); sd2card->writeBlock(blkAddr, pBuf);
return true; return true;
} }
// multi block optmization // multi block optmization
sd2card.writeStart(blkAddr, blkLen); sd2card->writeStart(blkAddr, blkLen);
while (blkLen--) { while (blkLen--) {
watchdog_refresh(); watchdog_refresh();
sd2card.writeData(pBuf); sd2card->writeData(pBuf);
pBuf += BLOCK_SIZE; pBuf += BLOCK_SIZE;
} }
sd2card.writeStop(); sd2card->writeStop();
return true; return true;
} }
bool Read(uint8_t *pBuf, uint32_t blkAddr, uint16_t blkLen) { bool Read(uint8_t *pBuf, uint32_t blkAddr, uint16_t blkLen) {
auto sd2card = card.getSd2Card(); auto sd2card = diskIODriver();
// single block // single block
if (blkLen == 1) { if (blkLen == 1) {
watchdog_refresh(); watchdog_refresh();
sd2card.readBlock(blkAddr, pBuf); sd2card->readBlock(blkAddr, pBuf);
return true; return true;
} }
// multi block optmization // multi block optmization
sd2card.readStart(blkAddr); sd2card->readStart(blkAddr);
while (blkLen--) { while (blkLen--) {
watchdog_refresh(); watchdog_refresh();
sd2card.readData(pBuf); sd2card->readData(pBuf);
pBuf += BLOCK_SIZE; pBuf += BLOCK_SIZE;
} }
sd2card.readStop(); sd2card->readStop();
return true; return true;
} }
bool IsReady() { bool IsReady() {
return card.isMounted(); return diskIODriver()->isReady();
} }
}; };
@ -105,8 +117,8 @@ USBMscHandler *pSingleMscHandler = &usbMscHandler;
void MSC_SD_init() { void MSC_SD_init() {
USBDevice.end(); USBDevice.end();
delay(200); delay(200);
USBDevice.begin();
USBDevice.registerMscHandlers(1, &pSingleMscHandler, Marlin_STORAGE_Inquirydata); USBDevice.registerMscHandlers(1, &pSingleMscHandler, Marlin_STORAGE_Inquirydata);
USBDevice.begin();
} }
#endif // __STM32F1__ && HAS_SD_HOST_DRIVE #endif // __STM32F1__ && HAS_SD_HOST_DRIVE

2
Marlin/src/MarlinCore.cpp
View File

@ -757,7 +757,7 @@ void idle(TERN_(ADVANCED_PAUSE_FEATURE, bool no_stepper_sleep/*=false*/)) {
TERN_(SDSUPPORT, card.manage_media()); TERN_(SDSUPPORT, card.manage_media());
// Handle USB Flash Drive insert / remove // Handle USB Flash Drive insert / remove
TERN_(USB_FLASH_DRIVE_SUPPORT, Sd2Card::idle()); TERN_(USB_FLASH_DRIVE_SUPPORT, card.diskIODriver()->idle());
// Announce Host Keepalive state (if any) // Announce Host Keepalive state (if any)
TERN_(HOST_KEEPALIVE_FEATURE, gcode.host_keepalive()); TERN_(HOST_KEEPALIVE_FEATURE, gcode.host_keepalive());

9
Marlin/src/inc/Conditionals_post.h
View File

@ -356,6 +356,15 @@
#define SD_DETECT_STATE LOW #define SD_DETECT_STATE LOW
#endif #endif
#endif #endif
#if DISABLED(USB_FLASH_DRIVE_SUPPORT) || BOTH(MULTI_VOLUME, VOLUME_SD_ONBOARD)
#if ENABLED(SDIO_SUPPORT)
#define NEED_SD2CARD_SDIO 1
#else
#define NEED_SD2CARD_SPI 1
#endif
#endif
#endif #endif
#if ANY(HAS_GRAPHICAL_TFT, LCD_USE_DMA_FSMC, HAS_FSMC_GRAPHICAL_TFT, HAS_SPI_GRAPHICAL_TFT) || !PIN_EXISTS(SD_DETECT) #if ANY(HAS_GRAPHICAL_TFT, LCD_USE_DMA_FSMC, HAS_FSMC_GRAPHICAL_TFT, HAS_SPI_GRAPHICAL_TFT) || !PIN_EXISTS(SD_DETECT)

4
Marlin/src/lcd/extui/lib/mks_ui/draw_keyboard.cpp
View File

@ -148,7 +148,7 @@ static void lv_kb_event_cb(lv_obj_t *kb, lv_event_t event) {
public_buf_l[6] = 0x00; public_buf_l[6] = 0x00;
raw_send_to_wifi((uint8_t*)public_buf_l, 6); raw_send_to_wifi((uint8_t*)public_buf_l, 6);
last_disp_state = KEY_BOARD_UI; last_disp_state = KEYBOARD_UI;
lv_clear_keyboard(); lv_clear_keyboard();
wifi_tips_type = TIPS_TYPE_JOINING; wifi_tips_type = TIPS_TYPE_JOINING;
lv_draw_wifi_tips(); lv_draw_wifi_tips();
@ -216,7 +216,7 @@ static void lv_kb_event_cb(lv_obj_t *kb, lv_event_t event) {
} }
void lv_draw_keyboard() { void lv_draw_keyboard() {
scr = lv_screen_create(KEY_BOARD_UI, ""); scr = lv_screen_create(KEYBOARD_UI, "");
// Create styles for the keyboard // Create styles for the keyboard
static lv_style_t rel_style, pr_style; static lv_style_t rel_style, pr_style;

73
Marlin/src/lcd/extui/lib/mks_ui/draw_media_select.cpp Normal file
View File

@ -0,0 +1,73 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../../../../inc/MarlinConfigPre.h"
#if BOTH(HAS_TFT_LVGL_UI, MULTI_VOLUME)
#include "draw_ui.h"
#include <lv_conf.h>
#include "../../../../inc/MarlinConfig.h"
#include "../../../../sd/cardreader.h"
extern lv_group_t *g;
static lv_obj_t *scr;
enum {
ID_T_USB_DISK = 1,
ID_T_SD_DISK,
ID_T_RETURN
};
#if ENABLED(MKS_TEST)
extern uint8_t curent_disp_ui;
#endif
static void event_handler(lv_obj_t *obj, lv_event_t event) {
if (event != LV_EVENT_RELEASED) return;
lv_clear_media_select();
switch (obj->mks_obj_id) {
case ID_T_USB_DISK: card.changeMedia(&card.media_usbFlashDrive); break;
case ID_T_SD_DISK: card.changeMedia(&card.media_sd_spi); break;
case ID_T_RETURN:
TERN_(MKS_TEST, curent_disp_ui = 1);
lv_draw_ready_print();
return;
}
lv_draw_print_file();
}
void lv_draw_media_select() {
scr = lv_screen_create(MEDIA_SELECT_UI);
lv_big_button_create(scr, "F:/bmp_sd.bin", media_select_menu.sd_disk, INTERVAL_V, titleHeight, event_handler, ID_T_SD_DISK);
lv_big_button_create(scr, "F:/bmp_usb_disk.bin", media_select_menu.usb_disk, BTN_X_PIXEL + INTERVAL_V * 2, titleHeight, event_handler, ID_T_USB_DISK);
lv_big_button_create(scr, "F:/bmp_return.bin", common_menu.text_back, BTN_X_PIXEL * 3 + INTERVAL_V * 4, BTN_Y_PIXEL + INTERVAL_H + titleHeight, event_handler, ID_T_RETURN);
}
void lv_clear_media_select() {
#if HAS_ROTARY_ENCODER
if (gCfgItems.encoder_enable) lv_group_remove_all_objs(g);
#endif
lv_obj_del(scr);
}
#endif // HAS_TFT_LVGL_UI

33
Marlin/src/lcd/extui/lib/mks_ui/draw_media_select.h Normal file
View File

@ -0,0 +1,33 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#ifdef __cplusplus
extern "C" { /* C-declarations for C++ */
#endif
extern void lv_draw_media_select();
extern void lv_clear_media_select();
#ifdef __cplusplus
} /* C-declarations for C++ */
#endif

3
Marlin/src/lcd/extui/lib/mks_ui/draw_print_file.cpp
View File

@ -177,7 +177,7 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) {
} }
else { else {
lv_clear_print_file(); lv_clear_print_file();
lv_draw_ready_print(); TERN(MULTI_VOLUME, lv_draw_media_select(), lv_draw_ready_print());
} }
} }
else { else {
@ -248,6 +248,7 @@ static char test_public_buf_l[40];
void disp_gcode_icon(uint8_t file_num) { void disp_gcode_icon(uint8_t file_num) {
uint8_t i; uint8_t i;
// TODO: set current media title?!
scr = lv_screen_create(PRINT_FILE_UI, ""); scr = lv_screen_create(PRINT_FILE_UI, "");
// Create image buttons // Create image buttons

2
Marlin/src/lcd/extui/lib/mks_ui/draw_ready_print.cpp
View File

@ -73,7 +73,7 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) {
case ID_INFO_EXT: uiCfg.curTempType = 0; lv_draw_preHeat(); break; case ID_INFO_EXT: uiCfg.curTempType = 0; lv_draw_preHeat(); break;
case ID_INFO_BED: uiCfg.curTempType = 1; lv_draw_preHeat(); break; case ID_INFO_BED: uiCfg.curTempType = 1; lv_draw_preHeat(); break;
case ID_INFO_FAN: lv_draw_fan(); break; case ID_INFO_FAN: lv_draw_fan(); break;
case ID_PRINT: lv_draw_print_file(); break; case ID_PRINT: TERN(MULTI_VOLUME, lv_draw_media_select(), lv_draw_print_file()); break;
} }
} }

166
Marlin/src/lcd/extui/lib/mks_ui/draw_ui.cpp
View File

@ -447,111 +447,63 @@ char *getDispText(int index) {
ZERO(public_buf_l); ZERO(public_buf_l);
switch (disp_state_stack._disp_state[index]) { switch (disp_state_stack._disp_state[index]) {
case PRINT_READY_UI: case PRINT_READY_UI: strcpy(public_buf_l, main_menu.title); break;
strcpy(public_buf_l, main_menu.title); case PRINT_FILE_UI: strcpy(public_buf_l, file_menu.title); break;
break;
case PRINT_FILE_UI:
strcpy(public_buf_l, file_menu.title);
break;
case PRINTING_UI: case PRINTING_UI:
if (disp_state_stack._disp_state[disp_state_stack._disp_index] == PRINTING_UI switch (disp_state_stack._disp_state[disp_state_stack._disp_index]) {
#ifndef TFT35 IF_DISABLED(TFT35, case OPERATE_UI: case PAUSE_UI:)
|| disp_state_stack._disp_state[disp_state_stack._disp_index] == OPERATE_UI case PRINTING_UI: strcpy(public_buf_l, common_menu.print_special_title); break;
|| disp_state_stack._disp_state[disp_state_stack._disp_index] == PAUSE_UI default: strcpy(public_buf_l, printing_menu.title); break;
#endif }
) strcpy(public_buf_l, common_menu.print_special_title);
else strcpy(public_buf_l, printing_menu.title);
break;
case MOVE_MOTOR_UI:
strcpy(public_buf_l, move_menu.title);
break; break;
case MOVE_MOTOR_UI: strcpy(public_buf_l, move_menu.title); break;
case OPERATE_UI: case OPERATE_UI:
if (disp_state_stack._disp_state[disp_state_stack._disp_index] == PRINTING_UI switch (disp_state_stack._disp_state[disp_state_stack._disp_index]) {
#ifndef TFT35 IF_DISABLED(TFT35, case OPERATE_UI: case PAUSE_UI:)
|| disp_state_stack._disp_state[disp_state_stack._disp_index] == OPERATE_UI case PRINTING_UI: strcpy(public_buf_l, common_menu.operate_special_title); break;
|| disp_state_stack._disp_state[disp_state_stack._disp_index] == PAUSE_UI default: strcpy(public_buf_l, operation_menu.title); break;
#endif }
) strcpy(public_buf_l, common_menu.operate_special_title);
else strcpy(public_buf_l, operation_menu.title);
break; break;
case PAUSE_UI: case PAUSE_UI:
if (disp_state_stack._disp_state[disp_state_stack._disp_index] == PRINTING_UI switch (disp_state_stack._disp_state[disp_state_stack._disp_index]) {
|| disp_state_stack._disp_state[disp_state_stack._disp_index] == OPERATE_UI case OPERATE_UI:
|| disp_state_stack._disp_state[disp_state_stack._disp_index] == PAUSE_UI case PAUSE_UI:
) strcpy(public_buf_l, common_menu.pause_special_title); case PRINTING_UI: strcpy(public_buf_l, common_menu.pause_special_title); break;
else strcpy(public_buf_l, pause_menu.title); default: strcpy(public_buf_l, pause_menu.title); break;
break; }
case EXTRUSION_UI:
strcpy(public_buf_l, extrude_menu.title);
break;
case CHANGE_SPEED_UI:
strcpy(public_buf_l, speed_menu.title);
break;
case FAN_UI:
strcpy(public_buf_l, fan_menu.title);
break; break;
case EXTRUSION_UI: strcpy(public_buf_l, extrude_menu.title); break;
case CHANGE_SPEED_UI: strcpy(public_buf_l, speed_menu.title); break;
case FAN_UI: strcpy(public_buf_l, fan_menu.title); break;
case PRE_HEAT_UI: case PRE_HEAT_UI:
if ((disp_state_stack._disp_state[disp_state_stack._disp_index - 1] == OPERATE_UI)) switch (disp_state_stack._disp_state[disp_state_stack._disp_index]) {
strcpy(public_buf_l, preheat_menu.adjust_title); case OPERATE_UI: strcpy(public_buf_l, preheat_menu.adjust_title);
else strcpy(public_buf_l, preheat_menu.title); default: strcpy(public_buf_l, preheat_menu.title); break;
break; }
case SET_UI:
strcpy(public_buf_l, set_menu.title);
break;
case ZERO_UI:
strcpy(public_buf_l, home_menu.title);
break; break;
case SET_UI: strcpy(public_buf_l, set_menu.title); break;
case ZERO_UI: strcpy(public_buf_l, home_menu.title); break;
case SPRAYER_UI: break; case SPRAYER_UI: break;
case MACHINE_UI: break; case MACHINE_UI: break;
case LANGUAGE_UI: case LANGUAGE_UI: strcpy(public_buf_l, language_menu.title); break;
strcpy(public_buf_l, language_menu.title); case ABOUT_UI: strcpy(public_buf_l, about_menu.title); break;
break;
case ABOUT_UI:
strcpy(public_buf_l, about_menu.title);
break;
case LOG_UI: break; case LOG_UI: break;
case DISK_UI: case DISK_UI: strcpy(public_buf_l, filesys_menu.title); break;
strcpy(public_buf_l, filesys_menu.title); case DIALOG_UI: strcpy(public_buf_l, common_menu.dialog_confirm_title); break;
break; case WIFI_UI: strcpy(public_buf_l, wifi_menu.title); break;
case DIALOG_UI:
strcpy(public_buf_l, common_menu.dialog_confirm_title);
break;
case WIFI_UI:
strcpy(public_buf_l, wifi_menu.title);
break;
case MORE_UI: case MORE_UI:
case PRINT_MORE_UI: case PRINT_MORE_UI: strcpy(public_buf_l, more_menu.title); break;
strcpy(public_buf_l, more_menu.title); case FILAMENTCHANGE_UI: strcpy(public_buf_l, filament_menu.title); break;
break;
case FILAMENTCHANGE_UI:
strcpy(public_buf_l, filament_menu.title);
break;
case LEVELING_UI: case LEVELING_UI:
case MESHLEVELING_UI: case MESHLEVELING_UI: strcpy(public_buf_l, leveling_menu.title); break;
strcpy(public_buf_l, leveling_menu.title); case BIND_UI: strcpy(public_buf_l, cloud_menu.title); break;
break; case TOOL_UI: strcpy(public_buf_l, tool_menu.title); break;
case BIND_UI: case WIFI_LIST_UI: TERN_(MKS_WIFI_MODULE, strcpy(public_buf_l, list_menu.title)); break;
strcpy(public_buf_l, cloud_menu.title); case MACHINE_PARA_UI: strcpy(public_buf_l, MachinePara_menu.title); break;
break; case BABY_STEP_UI: strcpy(public_buf_l, operation_menu.babystep); break;
case TOOL_UI: case EEPROM_SETTINGS_UI: strcpy(public_buf_l, eeprom_menu.title); break;
strcpy(public_buf_l, tool_menu.title); case MEDIA_SELECT_UI: strcpy(public_buf_l, media_select_menu.title); break;
break;
case WIFI_LIST_UI:
#if ENABLED(MKS_WIFI_MODULE)
strcpy(public_buf_l, list_menu.title);
break;
#endif
case MACHINE_PARA_UI:
strcpy(public_buf_l, MachinePara_menu.title);
break;
case BABY_STEP_UI:
strcpy(public_buf_l, operation_menu.babystep);
break;
case EEPROM_SETTINGS_UI:
strcpy(public_buf_l, eeprom_menu.title);
break;
default: break; default: break;
} }
@ -828,11 +780,9 @@ void GUI_RefreshPage() {
} }
break; break;
case OPERATE_UI: case OPERATE_UI: break;
break;
case PAUSE_UI: case PAUSE_UI: break;
break;
case FAN_UI: case FAN_UI:
if (temps_update_flag) { if (temps_update_flag) {
@ -841,8 +791,7 @@ void GUI_RefreshPage() {
} }
break; break;
case MOVE_MOTOR_UI: case MOVE_MOTOR_UI: break;
break;
#if ENABLED(MKS_WIFI_MODULE) #if ENABLED(MKS_WIFI_MODULE)
case WIFI_UI: case WIFI_UI:
@ -852,10 +801,9 @@ void GUI_RefreshPage() {
} }
break; break;
case BIND_UI: case BIND_UI: refresh_bind_ui(); break;
refresh_bind_ui();
break;
#endif #endif
case FILAMENTCHANGE_UI: case FILAMENTCHANGE_UI:
if (temps_update_flag) { if (temps_update_flag) {
temps_update_flag = false; temps_update_flag = false;
@ -866,10 +814,8 @@ void GUI_RefreshPage() {
filament_dialog_handle(); filament_dialog_handle();
TERN_(MKS_WIFI_MODULE, wifi_scan_handle()); TERN_(MKS_WIFI_MODULE, wifi_scan_handle());
break; break;
case MESHLEVELING_UI: case MESHLEVELING_UI: break;
break; case HARDWARE_TEST_UI: break;
case HARDWARE_TEST_UI:
break;
case WIFI_LIST_UI: case WIFI_LIST_UI:
#if ENABLED(MKS_WIFI_MODULE) #if ENABLED(MKS_WIFI_MODULE)
if (printing_rate_update_flag) { if (printing_rate_update_flag) {
@ -878,8 +824,8 @@ void GUI_RefreshPage() {
} }
#endif #endif
break; break;
case KEY_BOARD_UI: case KEYBOARD_UI: break;
break;
#if ENABLED(MKS_WIFI_MODULE) #if ENABLED(MKS_WIFI_MODULE)
case WIFI_TIPS_UI: case WIFI_TIPS_UI:
switch (wifi_tips_type) { switch (wifi_tips_type) {
@ -932,6 +878,7 @@ void GUI_RefreshPage() {
disp_z_offset_value(); disp_z_offset_value();
} }
break; break;
default: break; default: break;
} }
@ -982,7 +929,7 @@ void clear_cur_ui() {
#if ENABLED(MKS_WIFI_MODULE) #if ENABLED(MKS_WIFI_MODULE)
case WIFI_LIST_UI: lv_clear_wifi_list(); break; case WIFI_LIST_UI: lv_clear_wifi_list(); break;
#endif #endif
case KEY_BOARD_UI: lv_clear_keyboard(); break; case KEYBOARD_UI: lv_clear_keyboard(); break;
#if ENABLED(MKS_WIFI_MODULE) #if ENABLED(MKS_WIFI_MODULE)
case WIFI_TIPS_UI: lv_clear_wifi_tips(); break; case WIFI_TIPS_UI: lv_clear_wifi_tips(); break;
#endif #endif
@ -1032,6 +979,9 @@ void clear_cur_ui() {
#if ENABLED(TOUCH_SCREEN_CALIBRATION) #if ENABLED(TOUCH_SCREEN_CALIBRATION)
case TOUCH_CALIBRATION_UI: lv_clear_touch_calibration_screen(); break; case TOUCH_CALIBRATION_UI: lv_clear_touch_calibration_screen(); break;
#endif #endif
#if ENABLED(MULTI_VOLUME)
case MEDIA_SELECT_UI: lv_clear_media_select(); break;
#endif
default: break; default: break;
} }
} }
@ -1087,7 +1037,7 @@ void draw_return_ui() {
#if ENABLED(MKS_WIFI_MODULE) #if ENABLED(MKS_WIFI_MODULE)
case WIFI_LIST_UI: lv_draw_wifi_list(); break; case WIFI_LIST_UI: lv_draw_wifi_list(); break;
#endif #endif
case KEY_BOARD_UI: lv_draw_keyboard(); break; case KEYBOARD_UI: lv_draw_keyboard(); break;
#if ENABLED(MKS_WIFI_MODULE) #if ENABLED(MKS_WIFI_MODULE)
case WIFI_TIPS_UI: lv_draw_wifi_tips(); break; case WIFI_TIPS_UI: lv_draw_wifi_tips(); break;
#endif #endif

4
Marlin/src/lcd/extui/lib/mks_ui/draw_ui.h
View File

@ -76,6 +76,7 @@
#include "draw_homing_sensitivity_settings.h" #include "draw_homing_sensitivity_settings.h"
#include "draw_baby_stepping.h" #include "draw_baby_stepping.h"
#include "draw_keyboard.h" #include "draw_keyboard.h"
#include "draw_media_select.h"
#include "draw_encoder_settings.h" #include "draw_encoder_settings.h"
#include "../../../../inc/MarlinConfigPre.h" #include "../../../../inc/MarlinConfigPre.h"
@ -289,7 +290,7 @@ typedef enum {
TOOL_UI, TOOL_UI,
HARDWARE_TEST_UI, HARDWARE_TEST_UI,
WIFI_LIST_UI, WIFI_LIST_UI,
KEY_BOARD_UI, KEYBOARD_UI,
WIFI_TIPS_UI, WIFI_TIPS_UI,
MACHINE_PARA_UI, MACHINE_PARA_UI,
MACHINE_SETTINGS_UI, MACHINE_SETTINGS_UI,
@ -327,6 +328,7 @@ typedef enum {
ENCODER_SETTINGS_UI, ENCODER_SETTINGS_UI,
TOUCH_CALIBRATION_UI, TOUCH_CALIBRATION_UI,
GCODE_UI, GCODE_UI,
MEDIA_SELECT_UI,
} DISP_STATE; } DISP_STATE;
typedef struct { typedef struct {

7
Marlin/src/lcd/extui/lib/mks_ui/pic_manager.cpp
View File

@ -197,6 +197,13 @@ static const char assets[][LONG_FILENAME_LENGTH] = {
"bmp_cloud.bin", "bmp_cloud.bin",
#endif #endif
#if ENABLED(MULTI_VOLUME)
"bmp_usb_disk.bin",
// "bmp_usb_disk_sel.bin",
"bmp_sd.bin",
// "bmp_sd_sel.bin",
#endif
// Babystep screen // Babystep screen
"bmp_baby_move0_01.bin", "bmp_baby_move0_01.bin",
"bmp_baby_move0_05.bin", "bmp_baby_move0_05.bin",

1
Marlin/src/lcd/extui/lib/mks_ui/tft_Language_en.h
View File

@ -540,6 +540,7 @@
#define USB_DRIVE_BACK_EN "< Back" #define USB_DRIVE_BACK_EN "< Back"
#define FILE_PAGES_EN "%d/%d" #define FILE_PAGES_EN "%d/%d"
#define FILE_NEXT_PAGE_EN "Next Page" #define FILE_NEXT_PAGE_EN "Next Page"
#define MEDIA_SELECT_TITLE_EN "Select Media"
//BUILD PLATE //BUILD PLATE
#define PLATE_TITLE_EN "Build Plate" #define PLATE_TITLE_EN "Build Plate"

5
Marlin/src/lcd/extui/lib/mks_ui/tft_multi_language.cpp
View File

@ -56,6 +56,7 @@ tool_menu_def tool_menu;
MachinePara_menu_def MachinePara_menu; MachinePara_menu_def MachinePara_menu;
pause_msg_def pause_msg_menu; pause_msg_def pause_msg_menu;
eeprom_def eeprom_menu; eeprom_def eeprom_menu;
media_select_menu_def media_select_menu;
machine_common_def machine_menu; machine_common_def machine_menu;
void machine_setting_disp() { void machine_setting_disp() {
@ -821,6 +822,10 @@ void disp_language_init() {
filament_menu.stat_temp = TEXT_VALUE; filament_menu.stat_temp = TEXT_VALUE;
media_select_menu.title = MEDIA_SELECT_TITLE_EN;
media_select_menu.sd_disk = SD_CARD_TITLE_EN;
media_select_menu.usb_disk = USB_DRIVE_TITLE_EN;
machine_menu.key_0 = KEYBOARD_KEY0_EN; machine_menu.key_0 = KEYBOARD_KEY0_EN;
machine_menu.key_1 = KEYBOARD_KEY1_EN; machine_menu.key_1 = KEYBOARD_KEY1_EN;
machine_menu.key_2 = KEYBOARD_KEY2_EN; machine_menu.key_2 = KEYBOARD_KEY2_EN;

8
Marlin/src/lcd/extui/lib/mks_ui/tft_multi_language.h
View File

@ -706,6 +706,14 @@ typedef struct tool_menu_disp {
extern tool_menu_def tool_menu; extern tool_menu_def tool_menu;
typedef struct media_select_menu_disp {
const char *title;
const char *sd_disk;
const char *usb_disk;
} media_select_menu_def;
extern media_select_menu_def media_select_menu;
typedef struct MachinePara_menu_disp { typedef struct MachinePara_menu_disp {
const char *title; const char *title;
const char *MachineSetting; const char *MachineSetting;

2
Marlin/src/lcd/extui/lib/mks_ui/wifi_module.cpp
View File

@ -1142,7 +1142,7 @@ static void wifi_list_msg_handle(uint8_t * msg, uint16_t msgLen) {
int8_t valid_name_num; int8_t valid_name_num;
if (msgLen <= 0) return; if (msgLen <= 0) return;
if (disp_state == KEY_BOARD_UI) return; if (disp_state == KEYBOARD_UI) return;
wifi_list.getNameNum = msg[0]; wifi_list.getNameNum = msg[0];

48
Marlin/src/sd/Sd2Card.cpp
View File

@ -30,7 +30,7 @@
#include "../inc/MarlinConfig.h" #include "../inc/MarlinConfig.h"
#if ENABLED(SDSUPPORT) && NONE(USB_FLASH_DRIVE_SUPPORT, SDIO_SUPPORT) #if NEED_SD2CARD_SPI
/* Enable FAST CRC computations - You can trade speed for FLASH space if /* Enable FAST CRC computations - You can trade speed for FLASH space if
* needed by disabling the following define */ * needed by disabling the following define */
@ -88,7 +88,7 @@
#endif #endif
// Send command and return error code. Return zero for OK // Send command and return error code. Return zero for OK
uint8_t Sd2Card::cardCommand(const uint8_t cmd, const uint32_t arg) { uint8_t DiskIODriver_SPI_SD::cardCommand(const uint8_t cmd, const uint32_t arg) {
// Select card // Select card
chipSelect(); chipSelect();
@ -133,7 +133,7 @@ uint8_t Sd2Card::cardCommand(const uint8_t cmd, const uint32_t arg) {
* \return The number of 512 byte data blocks in the card * \return The number of 512 byte data blocks in the card
* or zero if an error occurs. * or zero if an error occurs.
*/ */
uint32_t Sd2Card::cardSize() { uint32_t DiskIODriver_SPI_SD::cardSize() {
csd_t csd; csd_t csd;
if (!readCSD(&csd)) return 0; if (!readCSD(&csd)) return 0;
if (csd.v1.csd_ver == 0) { if (csd.v1.csd_ver == 0) {
@ -155,12 +155,12 @@ uint32_t Sd2Card::cardSize() {
} }
} }
void Sd2Card::chipDeselect() { void DiskIODriver_SPI_SD::chipDeselect() {
extDigitalWrite(chipSelectPin_, HIGH); extDigitalWrite(chipSelectPin_, HIGH);
spiSend(0xFF); // Ensure MISO goes high impedance spiSend(0xFF); // Ensure MISO goes high impedance
} }
void Sd2Card::chipSelect() { void DiskIODriver_SPI_SD::chipSelect() {
spiInit(spiRate_); spiInit(spiRate_);
extDigitalWrite(chipSelectPin_, LOW); extDigitalWrite(chipSelectPin_, LOW);
} }
@ -178,7 +178,7 @@ void Sd2Card::chipSelect() {
* *
* \return true for success, false for failure. * \return true for success, false for failure.
*/ */
bool Sd2Card::erase(uint32_t firstBlock, uint32_t lastBlock) { bool DiskIODriver_SPI_SD::erase(uint32_t firstBlock, uint32_t lastBlock) {
if (ENABLED(SDCARD_READONLY)) return false; if (ENABLED(SDCARD_READONLY)) return false;
csd_t csd; csd_t csd;
@ -216,7 +216,7 @@ bool Sd2Card::erase(uint32_t firstBlock, uint32_t lastBlock) {
* \return true if single block erase is supported. * \return true if single block erase is supported.
* false if single block erase is not supported. * false if single block erase is not supported.
*/ */
bool Sd2Card::eraseSingleBlockEnable() { bool DiskIODriver_SPI_SD::eraseSingleBlockEnable() {
csd_t csd; csd_t csd;
return readCSD(&csd) ? csd.v1.erase_blk_en : false; return readCSD(&csd) ? csd.v1.erase_blk_en : false;
} }
@ -230,7 +230,7 @@ bool Sd2Card::eraseSingleBlockEnable() {
* \return true for success, false for failure. * \return true for success, false for failure.
* The reason for failure can be determined by calling errorCode() and errorData(). * The reason for failure can be determined by calling errorCode() and errorData().
*/ */
bool Sd2Card::init(const uint8_t sckRateID, const pin_t chipSelectPin) { bool DiskIODriver_SPI_SD::init(const uint8_t sckRateID, const pin_t chipSelectPin) {
#if IS_TEENSY_35_36 || IS_TEENSY_40_41 #if IS_TEENSY_35_36 || IS_TEENSY_40_41
chipSelectPin_ = BUILTIN_SDCARD; chipSelectPin_ = BUILTIN_SDCARD;
const uint8_t ret = SDHC_CardInit(); const uint8_t ret = SDHC_CardInit();
@ -324,10 +324,12 @@ bool Sd2Card::init(const uint8_t sckRateID, const pin_t chipSelectPin) {
} }
chipDeselect(); chipDeselect();
ready = true;
return setSckRate(sckRateID); return setSckRate(sckRateID);
FAIL: FAIL:
chipDeselect(); chipDeselect();
ready = false;
return false; return false;
} }
@ -338,7 +340,7 @@ bool Sd2Card::init(const uint8_t sckRateID, const pin_t chipSelectPin) {
* \param[out] dst Pointer to the location that will receive the data. * \param[out] dst Pointer to the location that will receive the data.
* \return true for success, false for failure. * \return true for success, false for failure.
*/ */
bool Sd2Card::readBlock(uint32_t blockNumber, uint8_t *dst) { bool DiskIODriver_SPI_SD::readBlock(uint32_t blockNumber, uint8_t *dst) {
#if IS_TEENSY_35_36 || IS_TEENSY_40_41 #if IS_TEENSY_35_36 || IS_TEENSY_40_41
return 0 == SDHC_CardReadBlock(dst, blockNumber); return 0 == SDHC_CardReadBlock(dst, blockNumber);
#endif #endif
@ -378,7 +380,7 @@ bool Sd2Card::readBlock(uint32_t blockNumber, uint8_t *dst) {
* *
* \return true for success, false for failure. * \return true for success, false for failure.
*/ */
bool Sd2Card::readData(uint8_t *dst) { bool DiskIODriver_SPI_SD::readData(uint8_t *dst) {
chipSelect(); chipSelect();
return readData(dst, 512); return readData(dst, 512);
} }
@ -445,7 +447,7 @@ bool Sd2Card::readData(uint8_t *dst) {
#endif #endif
#endif // SD_CHECK_AND_RETRY #endif // SD_CHECK_AND_RETRY
bool Sd2Card::readData(uint8_t *dst, const uint16_t count) { bool DiskIODriver_SPI_SD::readData(uint8_t *dst, const uint16_t count) {
bool success = false; bool success = false;
const millis_t read_timeout = millis() + SD_READ_TIMEOUT; const millis_t read_timeout = millis() + SD_READ_TIMEOUT;
@ -477,7 +479,7 @@ bool Sd2Card::readData(uint8_t *dst, const uint16_t count) {
} }
/** read CID or CSR register */ /** read CID or CSR register */
bool Sd2Card::readRegister(const uint8_t cmd, void *buf) { bool DiskIODriver_SPI_SD::readRegister(const uint8_t cmd, void *buf) {
uint8_t *dst = reinterpret_cast<uint8_t*>(buf); uint8_t *dst = reinterpret_cast<uint8_t*>(buf);
if (cardCommand(cmd, 0)) { if (cardCommand(cmd, 0)) {
error(SD_CARD_ERROR_READ_REG); error(SD_CARD_ERROR_READ_REG);
@ -497,7 +499,7 @@ bool Sd2Card::readRegister(const uint8_t cmd, void *buf) {
* *
* \return true for success, false for failure. * \return true for success, false for failure.
*/ */
bool Sd2Card::readStart(uint32_t blockNumber) { bool DiskIODriver_SPI_SD::readStart(uint32_t blockNumber) {
if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9; if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9;
const bool success = !cardCommand(CMD18, blockNumber); const bool success = !cardCommand(CMD18, blockNumber);
@ -511,7 +513,7 @@ bool Sd2Card::readStart(uint32_t blockNumber) {
* *
* \return true for success, false for failure. * \return true for success, false for failure.
*/ */
bool Sd2Card::readStop() { bool DiskIODriver_SPI_SD::readStop() {
chipSelect(); chipSelect();
const bool success = !cardCommand(CMD12, 0); const bool success = !cardCommand(CMD12, 0);
if (!success) error(SD_CARD_ERROR_CMD12); if (!success) error(SD_CARD_ERROR_CMD12);
@ -531,7 +533,7 @@ bool Sd2Card::readStop() {
* \return The value one, true, is returned for success and the value zero, * \return The value one, true, is returned for success and the value zero,
* false, is returned for an invalid value of \a sckRateID. * false, is returned for an invalid value of \a sckRateID.
*/ */
bool Sd2Card::setSckRate(const uint8_t sckRateID) { bool DiskIODriver_SPI_SD::setSckRate(const uint8_t sckRateID) {
const bool success = (sckRateID <= 6); const bool success = (sckRateID <= 6);
if (success) spiRate_ = sckRateID; else error(SD_CARD_ERROR_SCK_RATE); if (success) spiRate_ = sckRateID; else error(SD_CARD_ERROR_SCK_RATE);
return success; return success;
@ -542,12 +544,14 @@ bool Sd2Card::setSckRate(const uint8_t sckRateID) {
* \param[in] timeout_ms Timeout to abort. * \param[in] timeout_ms Timeout to abort.
* \return true for success, false for timeout. * \return true for success, false for timeout.
*/ */
bool Sd2Card::waitNotBusy(const millis_t timeout_ms) { bool DiskIODriver_SPI_SD::waitNotBusy(const millis_t timeout_ms) {
const millis_t wait_timeout = millis() + timeout_ms; const millis_t wait_timeout = millis() + timeout_ms;
while (spiRec() != 0xFF) if (ELAPSED(millis(), wait_timeout)) return false; while (spiRec() != 0xFF) if (ELAPSED(millis(), wait_timeout)) return false;
return true; return true;
} }
void DiskIODriver_SPI_SD::error(const uint8_t code) { errorCode_ = code; }
/** /**
* Write a 512 byte block to an SD card. * Write a 512 byte block to an SD card.
* *
@ -555,7 +559,7 @@ bool Sd2Card::waitNotBusy(const millis_t timeout_ms) {
* \param[in] src Pointer to the location of the data to be written. * \param[in] src Pointer to the location of the data to be written.
* \return true for success, false for failure. * \return true for success, false for failure.
*/ */
bool Sd2Card::writeBlock(uint32_t blockNumber, const uint8_t *src) { bool DiskIODriver_SPI_SD::writeBlock(uint32_t blockNumber, const uint8_t *src) {
if (ENABLED(SDCARD_READONLY)) return false; if (ENABLED(SDCARD_READONLY)) return false;
#if IS_TEENSY_35_36 || IS_TEENSY_40_41 #if IS_TEENSY_35_36 || IS_TEENSY_40_41
@ -586,7 +590,7 @@ bool Sd2Card::writeBlock(uint32_t blockNumber, const uint8_t *src) {
* \param[in] src Pointer to the location of the data to be written. * \param[in] src Pointer to the location of the data to be written.
* \return true for success, false for failure. * \return true for success, false for failure.
*/ */
bool Sd2Card::writeData(const uint8_t *src) { bool DiskIODriver_SPI_SD::writeData(const uint8_t *src) {
if (ENABLED(SDCARD_READONLY)) return false; if (ENABLED(SDCARD_READONLY)) return false;
bool success = true; bool success = true;
@ -601,7 +605,7 @@ bool Sd2Card::writeData(const uint8_t *src) {
} }
// Send one block of data for write block or write multiple blocks // Send one block of data for write block or write multiple blocks
bool Sd2Card::writeData(const uint8_t token, const uint8_t *src) { bool DiskIODriver_SPI_SD::writeData(const uint8_t token, const uint8_t *src) {
if (ENABLED(SDCARD_READONLY)) return false; if (ENABLED(SDCARD_READONLY)) return false;
const uint16_t crc = TERN(SD_CHECK_AND_RETRY, CRC_CCITT(src, 512), 0xFFFF); const uint16_t crc = TERN(SD_CHECK_AND_RETRY, CRC_CCITT(src, 512), 0xFFFF);
@ -629,7 +633,7 @@ bool Sd2Card::writeData(const uint8_t token, const uint8_t *src) {
* *
* \return true for success, false for failure. * \return true for success, false for failure.
*/ */
bool Sd2Card::writeStart(uint32_t blockNumber, const uint32_t eraseCount) { bool DiskIODriver_SPI_SD::writeStart(uint32_t blockNumber, const uint32_t eraseCount) {
if (ENABLED(SDCARD_READONLY)) return false; if (ENABLED(SDCARD_READONLY)) return false;
bool success = false; bool success = false;
@ -650,7 +654,7 @@ bool Sd2Card::writeStart(uint32_t blockNumber, const uint32_t eraseCount) {
* *
* \return true for success, false for failure. * \return true for success, false for failure.
*/ */
bool Sd2Card::writeStop() { bool DiskIODriver_SPI_SD::writeStop() {
if (ENABLED(SDCARD_READONLY)) return false; if (ENABLED(SDCARD_READONLY)) return false;
bool success = false; bool success = false;
@ -666,4 +670,4 @@ bool Sd2Card::writeStop() {
return success; return success;
} }
#endif // SDSUPPORT #endif // NEED_SD2CARD_SPI

99
Marlin/src/sd/Sd2Card.h
View File

@ -35,42 +35,45 @@
#include "SdFatConfig.h" #include "SdFatConfig.h"
#include "SdInfo.h" #include "SdInfo.h"
#include "disk_io_driver.h"
#include <stdint.h> #include <stdint.h>
uint16_t const SD_INIT_TIMEOUT = 2000, // init timeout ms uint16_t const SD_INIT_TIMEOUT = 2000, // (ms) Init timeout
SD_ERASE_TIMEOUT = 10000, // erase timeout ms SD_ERASE_TIMEOUT = 10000, // (ms) Erase timeout
SD_READ_TIMEOUT = 300, // read timeout ms SD_READ_TIMEOUT = 300, // (ms) Read timeout
SD_WRITE_TIMEOUT = 600; // write time out ms SD_WRITE_TIMEOUT = 600; // (ms) Write timeout
// SD card errors // SD card errors
uint8_t const SD_CARD_ERROR_CMD0 = 0x01, // timeout error for command CMD0 (initialize card in SPI mode) typedef enum : uint8_t {
SD_CARD_ERROR_CMD0 = 0x01, // Timeout error for command CMD0 (initialize card in SPI mode)
SD_CARD_ERROR_CMD8 = 0x02, // CMD8 was not accepted - not a valid SD card SD_CARD_ERROR_CMD8 = 0x02, // CMD8 was not accepted - not a valid SD card
SD_CARD_ERROR_CMD12 = 0x03, // card returned an error response for CMD12 (write stop) SD_CARD_ERROR_CMD12 = 0x03, // Card returned an error response for CMD12 (write stop)
SD_CARD_ERROR_CMD17 = 0x04, // card returned an error response for CMD17 (read block) SD_CARD_ERROR_CMD17 = 0x04, // Card returned an error response for CMD17 (read block)
SD_CARD_ERROR_CMD18 = 0x05, // card returned an error response for CMD18 (read multiple block) SD_CARD_ERROR_CMD18 = 0x05, // Card returned an error response for CMD18 (read multiple block)
SD_CARD_ERROR_CMD24 = 0x06, // card returned an error response for CMD24 (write block) SD_CARD_ERROR_CMD24 = 0x06, // Card returned an error response for CMD24 (write block)
SD_CARD_ERROR_CMD25 = 0x07, // WRITE_MULTIPLE_BLOCKS command failed SD_CARD_ERROR_CMD25 = 0x07, // WRITE_MULTIPLE_BLOCKS command failed
SD_CARD_ERROR_CMD58 = 0x08, // card returned an error response for CMD58 (read OCR) SD_CARD_ERROR_CMD58 = 0x08, // Card returned an error response for CMD58 (read OCR)
SD_CARD_ERROR_ACMD23 = 0x09, // SET_WR_BLK_ERASE_COUNT failed SD_CARD_ERROR_ACMD23 = 0x09, // SET_WR_BLK_ERASE_COUNT failed
SD_CARD_ERROR_ACMD41 = 0x0A, // ACMD41 initialization process timeout SD_CARD_ERROR_ACMD41 = 0x0A, // ACMD41 initialization process timeout
SD_CARD_ERROR_BAD_CSD = 0x0B, // card returned a bad CSR version field SD_CARD_ERROR_BAD_CSD = 0x0B, // Card returned a bad CSR version field
SD_CARD_ERROR_ERASE = 0x0C, // erase block group command failed SD_CARD_ERROR_ERASE = 0x0C, // Erase block group command failed
SD_CARD_ERROR_ERASE_SINGLE_BLOCK = 0x0D, // card not capable of single block erase SD_CARD_ERROR_ERASE_SINGLE_BLOCK = 0x0D, // Card not capable of single block erase
SD_CARD_ERROR_ERASE_TIMEOUT = 0x0E, // Erase sequence timed out SD_CARD_ERROR_ERASE_TIMEOUT = 0x0E, // Erase sequence timed out
SD_CARD_ERROR_READ = 0x0F, // card returned an error token instead of read data SD_CARD_ERROR_READ = 0x0F, // Card returned an error token instead of read data
SD_CARD_ERROR_READ_REG = 0x10, // read CID or CSD failed SD_CARD_ERROR_READ_REG = 0x10, // Read CID or CSD failed
SD_CARD_ERROR_READ_TIMEOUT = 0x11, // timeout while waiting for start of read data SD_CARD_ERROR_READ_TIMEOUT = 0x11, // Timeout while waiting for start of read data
SD_CARD_ERROR_STOP_TRAN = 0x12, // card did not accept STOP_TRAN_TOKEN SD_CARD_ERROR_STOP_TRAN = 0x12, // Card did not accept STOP_TRAN_TOKEN
SD_CARD_ERROR_WRITE = 0x13, // card returned an error token as a response to a write operation SD_CARD_ERROR_WRITE = 0x13, // Card returned an error token as a response to a write operation
SD_CARD_ERROR_WRITE_BLOCK_ZERO = 0x14, // REMOVE - not used ... attempt to write protected block zero SD_CARD_ERROR_WRITE_BLOCK_ZERO = 0x14, // REMOVE - not used ... attempt to write protected block zero
SD_CARD_ERROR_WRITE_MULTIPLE = 0x15, // card did not go ready for a multiple block write SD_CARD_ERROR_WRITE_MULTIPLE = 0x15, // Card did not go ready for a multiple block write
SD_CARD_ERROR_WRITE_PROGRAMMING = 0x16, // card returned an error to a CMD13 status check after a write SD_CARD_ERROR_WRITE_PROGRAMMING = 0x16, // Card returned an error to a CMD13 status check after a write
SD_CARD_ERROR_WRITE_TIMEOUT = 0x17, // timeout occurred during write programming SD_CARD_ERROR_WRITE_TIMEOUT = 0x17, // Timeout occurred during write programming
SD_CARD_ERROR_SCK_RATE = 0x18, // incorrect rate selected SD_CARD_ERROR_SCK_RATE = 0x18, // Incorrect rate selected
SD_CARD_ERROR_INIT_NOT_CALLED = 0x19, // init() not called SD_CARD_ERROR_INIT_NOT_CALLED = 0x19, // Init() not called
// 0x1A is unused now, it was: card returned an error for CMD59 (CRC_ON_OFF) // 0x1A is unused now, it was: card returned an error for CMD59 (CRC_ON_OFF)
SD_CARD_ERROR_READ_CRC = 0x1B; // invalid read CRC SD_CARD_ERROR_READ_CRC = 0x1B // Invalid read CRC
} sd_error_code_t;
// card types // card types
uint8_t const SD_CARD_TYPE_SD1 = 1, // Standard capacity V1 SD card uint8_t const SD_CARD_TYPE_SD1 = 1, // Standard capacity V1 SD card
@ -93,12 +96,11 @@ uint8_t const SD_CARD_TYPE_SD1 = 1, // Standard capacity V1
* \class Sd2Card * \class Sd2Card
* \brief Raw access to SD and SDHC flash memory cards. * \brief Raw access to SD and SDHC flash memory cards.
*/ */
class Sd2Card { class DiskIODriver_SPI_SD : public DiskIODriver {
public: public:
Sd2Card() : errorCode_(SD_CARD_ERROR_INIT_NOT_CALLED), type_(0) {} DiskIODriver_SPI_SD() : errorCode_(SD_CARD_ERROR_INIT_NOT_CALLED), type_(0) {}
uint32_t cardSize();
bool erase(uint32_t firstBlock, uint32_t lastBlock); bool erase(uint32_t firstBlock, uint32_t lastBlock);
bool eraseSingleBlockEnable(); bool eraseSingleBlockEnable();
@ -106,7 +108,7 @@ public:
* Set SD error code. * Set SD error code.
* \param[in] code value for error code. * \param[in] code value for error code.
*/ */
inline void error(const uint8_t code) { errorCode_ = code; } void error(const uint8_t code);
/** /**
* \return error code for last error. See Sd2Card.h for a list of error codes. * \return error code for last error. See Sd2Card.h for a list of error codes.
@ -122,9 +124,15 @@ public:
* *
* \return true for success or false for failure. * \return true for success or false for failure.
*/ */
bool init(const uint8_t sckRateID, const pin_t chipSelectPin); bool init(const uint8_t sckRateID, const pin_t chipSelectPin) override;
bool readBlock(uint32_t block, uint8_t *dst); bool setSckRate(const uint8_t sckRateID);
/**
* Return the card type: SD V1, SD V2 or SDHC
* \return 0 - SD V1, 1 - SD V2, or 3 - SDHC.
*/
int type() const { return type_; }
/** /**
* Read a card's CID register. The CID contains card identification * Read a card's CID register. The CID contains card identification
@ -145,24 +153,27 @@ public:
* *
* \return true for success or false for failure. * \return true for success or false for failure.
*/ */
inline bool readCSD(csd_t *csd) { return readRegister(CMD9, csd); } inline bool readCSD(csd_t *csd) override { return readRegister(CMD9, csd); }
bool readData(uint8_t *dst); bool readData(uint8_t *dst) override;
bool readStart(uint32_t blockNumber); bool readStart(uint32_t blockNumber) override;
bool readStop(); bool readStop() override;
bool setSckRate(const uint8_t sckRateID);
/** bool writeData(const uint8_t *src) override;
* Return the card type: SD V1, SD V2 or SDHC bool writeStart(const uint32_t blockNumber, const uint32_t eraseCount) override;
* \return 0 - SD V1, 1 - SD V2, or 3 - SDHC. bool writeStop() override;
*/
int type() const {return type_;} bool readBlock(uint32_t block, uint8_t *dst) override;
bool writeBlock(uint32_t blockNumber, const uint8_t *src); bool writeBlock(uint32_t blockNumber, const uint8_t *src) override;
bool writeData(const uint8_t *src);
bool writeStart(uint32_t blockNumber, const uint32_t eraseCount); uint32_t cardSize() override;
bool writeStop();
bool isReady() override { return ready; };
void idle() override {}
private: private:
bool ready = false;
uint8_t chipSelectPin_, uint8_t chipSelectPin_,
errorCode_, errorCode_,
spiRate_, spiRate_,

30
Marlin/src/sd/Sd2Card_sdio.h
View File

@ -23,17 +23,33 @@
#include "../inc/MarlinConfig.h" #include "../inc/MarlinConfig.h"
#if ENABLED(SDIO_SUPPORT) #include "SdInfo.h"
#include "disk_io_driver.h"
bool SDIO_Init(); bool SDIO_Init();
bool SDIO_ReadBlock(uint32_t block, uint8_t *dst); bool SDIO_ReadBlock(uint32_t block, uint8_t *dst);
bool SDIO_WriteBlock(uint32_t block, const uint8_t *src); bool SDIO_WriteBlock(uint32_t block, const uint8_t *src);
class Sd2Card { class DiskIODriver_SDIO : public DiskIODriver {
public: public:
bool init(uint8_t sckRateID = 0, uint8_t chipSelectPin = 0) { return SDIO_Init(); } bool init(const uint8_t sckRateID=0, const pin_t chipSelectPin=0) override { return SDIO_Init(); }
bool readBlock(uint32_t block, uint8_t *dst) { return SDIO_ReadBlock(block, dst); }
bool writeBlock(uint32_t block, const uint8_t *src) { return SDIO_WriteBlock(block, src); }
};
#endif // SDIO_SUPPORT bool readCSD(csd_t *csd) override { return false; }
bool readStart(const uint32_t block) override { return false; }
bool readData(uint8_t *dst) override { return false; }
bool readStop() override { return false; }
bool writeStart(const uint32_t block, const uint32_t) override { return false; }
bool writeData(const uint8_t *src) override { return false; }
bool writeStop() override { return false; }
bool readBlock(uint32_t block, uint8_t *dst) override { return SDIO_ReadBlock(block, dst); }
bool writeBlock(uint32_t block, const uint8_t *src) override { return SDIO_WriteBlock(block, src); }
uint32_t cardSize() override { return 0; }
bool isReady() override { return true; }
void idle() override {}
};

2
Marlin/src/sd/SdFatConfig.h
View File

@ -39,7 +39,7 @@
* *
* Each card requires about 550 bytes of SRAM so use of a Mega is recommended. * Each card requires about 550 bytes of SRAM so use of a Mega is recommended.
*/ */
#define USE_MULTIPLE_CARDS 0 #define USE_MULTIPLE_CARDS 0 //TODO? ENABLED(MULTI_VOLUME)
/** /**
* Call flush for endl if ENDL_CALLS_FLUSH is nonzero * Call flush for endl if ENDL_CALLS_FLUSH is nonzero

6
Marlin/src/sd/SdVolume.cpp
View File

@ -41,10 +41,10 @@
// raw block cache // raw block cache
uint32_t SdVolume::cacheBlockNumber_; // current block number uint32_t SdVolume::cacheBlockNumber_; // current block number
cache_t SdVolume::cacheBuffer_; // 512 byte cache for Sd2Card cache_t SdVolume::cacheBuffer_; // 512 byte cache for Sd2Card
Sd2Card* SdVolume::sdCard_; // pointer to SD card object DiskIODriver *SdVolume::sdCard_; // pointer to SD card object
bool SdVolume::cacheDirty_; // cacheFlush() will write block if true bool SdVolume::cacheDirty_; // cacheFlush() will write block if true
uint32_t SdVolume::cacheMirrorBlock_; // mirror block for second FAT uint32_t SdVolume::cacheMirrorBlock_; // mirror block for second FAT
#endif // USE_MULTIPLE_CARDS #endif
// find a contiguous group of clusters // find a contiguous group of clusters
bool SdVolume::allocContiguous(uint32_t count, uint32_t *curCluster) { bool SdVolume::allocContiguous(uint32_t count, uint32_t *curCluster) {
@ -326,7 +326,7 @@ int32_t SdVolume::freeClusterCount() {
* Reasons for failure include not finding a valid partition, not finding a valid * Reasons for failure include not finding a valid partition, not finding a valid
* FAT file system in the specified partition or an I/O error. * FAT file system in the specified partition or an I/O error.
*/ */
bool SdVolume::init(Sd2Card* dev, uint8_t part) { bool SdVolume::init(DiskIODriver* dev, uint8_t part) {
uint32_t totalBlocks, volumeStartBlock = 0; uint32_t totalBlocks, volumeStartBlock = 0;
fat32_boot_t *fbs; fat32_boot_t *fbs;

23
Marlin/src/sd/SdVolume.h
View File

@ -36,9 +36,11 @@
#if ENABLED(USB_FLASH_DRIVE_SUPPORT) #if ENABLED(USB_FLASH_DRIVE_SUPPORT)
#include "usb_flashdrive/Sd2Card_FlashDrive.h" #include "usb_flashdrive/Sd2Card_FlashDrive.h"
#elif ENABLED(SDIO_SUPPORT) #endif
#if NEED_SD2CARD_SDIO
#include "Sd2Card_sdio.h" #include "Sd2Card_sdio.h"
#else #elif NEED_SD2CARD_SPI
#include "Sd2Card.h" #include "Sd2Card.h"
#endif #endif
@ -47,6 +49,7 @@
//============================================================================== //==============================================================================
// SdVolume class // SdVolume class
/** /**
* \brief Cache for an SD data block * \brief Cache for an SD data block
*/ */
@ -84,14 +87,14 @@ class SdVolume {
* Initialize a FAT volume. Try partition one first then try super * Initialize a FAT volume. Try partition one first then try super
* floppy format. * floppy format.
* *
* \param[in] dev The Sd2Card where the volume is located. * \param[in] dev The DiskIODriver where the volume is located.
* *
* \return true for success, false for failure. * \return true for success, false for failure.
* Reasons for failure include not finding a valid partition, not finding * Reasons for failure include not finding a valid partition, not finding
* a valid FAT file system or an I/O error. * a valid FAT file system or an I/O error.
*/ */
bool init(Sd2Card *dev) { return init(dev, 1) ? true : init(dev, 0); } bool init(DiskIODriver *dev) { return init(dev, 1) || init(dev, 0); }
bool init(Sd2Card *dev, uint8_t part); bool init(DiskIODriver *dev, uint8_t part);
// inline functions that return volume info // inline functions that return volume info
uint8_t blocksPerCluster() const { return blocksPerCluster_; } //> \return The volume's cluster size in blocks. uint8_t blocksPerCluster() const { return blocksPerCluster_; } //> \return The volume's cluster size in blocks.
@ -112,10 +115,10 @@ class SdVolume {
uint32_t rootDirStart() const { return rootDirStart_; } uint32_t rootDirStart() const { return rootDirStart_; }
/** /**
* Sd2Card object for this volume * DiskIODriver object for this volume
* \return pointer to Sd2Card object. * \return pointer to DiskIODriver object.
*/ */
Sd2Card* sdCard() { return sdCard_; } DiskIODriver* sdCard() { return sdCard_; }
/** /**
* Debug access to FAT table * Debug access to FAT table
@ -138,13 +141,13 @@ class SdVolume {
#if USE_MULTIPLE_CARDS #if USE_MULTIPLE_CARDS
cache_t cacheBuffer_; // 512 byte cache for device blocks cache_t cacheBuffer_; // 512 byte cache for device blocks
uint32_t cacheBlockNumber_; // Logical number of block in the cache uint32_t cacheBlockNumber_; // Logical number of block in the cache
Sd2Card *sdCard_; // Sd2Card object for cache DiskIODriver *sdCard_; // DiskIODriver object for cache
bool cacheDirty_; // cacheFlush() will write block if true bool cacheDirty_; // cacheFlush() will write block if true
uint32_t cacheMirrorBlock_; // block number for mirror FAT uint32_t cacheMirrorBlock_; // block number for mirror FAT
#else #else
static cache_t cacheBuffer_; // 512 byte cache for device blocks static cache_t cacheBuffer_; // 512 byte cache for device blocks
static uint32_t cacheBlockNumber_; // Logical number of block in the cache static uint32_t cacheBlockNumber_; // Logical number of block in the cache
static Sd2Card *sdCard_; // Sd2Card object for cache static DiskIODriver *sdCard_; // DiskIODriver object for cache
static bool cacheDirty_; // cacheFlush() will write block if true static bool cacheDirty_; // cacheFlush() will write block if true
static uint32_t cacheMirrorBlock_; // block number for mirror FAT static uint32_t cacheMirrorBlock_; // block number for mirror FAT
#endif #endif

27
Marlin/src/sd/cardreader.cpp
View File

@ -120,7 +120,16 @@ uint8_t CardReader::workDirDepth;
#endif // SDCARD_SORT_ALPHA #endif // SDCARD_SORT_ALPHA
Sd2Card CardReader::sd2card; #if SHARED_VOLUME_IS(USB_FLASH_DRIVE) || ENABLED(USB_FLASH_DRIVE_SUPPORT)
DiskIODriver_USBFlash CardReader::media_usbFlashDrive;
#endif
#if NEED_SD2CARD_SDIO
DiskIODriver_SDIO CardReader::media_sdio;
#elif NEED_SD2CARD_SPI
DiskIODriver_SPI_SD CardReader::media_sd_spi;
#endif
DiskIODriver* CardReader::driver = nullptr;
SdVolume CardReader::volume; SdVolume CardReader::volume;
SdFile CardReader::file; SdFile CardReader::file;
@ -133,6 +142,16 @@ SdFile CardReader::file;
uint32_t CardReader::filesize, CardReader::sdpos; uint32_t CardReader::filesize, CardReader::sdpos;
CardReader::CardReader() { CardReader::CardReader() {
changeMedia(&
#if SHARED_VOLUME_IS(SD_ONBOARD)
media_sd_spi
#elif SHARED_VOLUME_IS(USB_FLASH_DRIVE) || ENABLED(USB_FLASH_DRIVE_SUPPORT)
media_usbFlashDrive
#else
TERN(SDIO_SUPPORT, media_sdio, media_sd_spi)
#endif
);
#if ENABLED(SDCARD_SORT_ALPHA) #if ENABLED(SDCARD_SORT_ALPHA)
sort_count = 0; sort_count = 0;
#if ENABLED(SDSORT_GCODE) #if ENABLED(SDSORT_GCODE)
@ -383,12 +402,12 @@ void CardReader::mount() {
flag.mounted = false; flag.mounted = false;
if (root.isOpen()) root.close(); if (root.isOpen()) root.close();
if (!sd2card.init(SD_SPI_SPEED, SDSS) if (!driver->init(SD_SPI_SPEED, SDSS)
#if defined(LCD_SDSS) && (LCD_SDSS != SDSS) #if defined(LCD_SDSS) && (LCD_SDSS != SDSS)
&& !sd2card.init(SD_SPI_SPEED, LCD_SDSS) && !driver->init(SD_SPI_SPEED, LCD_SDSS)
#endif #endif
) SERIAL_ECHO_MSG(STR_SD_INIT_FAIL); ) SERIAL_ECHO_MSG(STR_SD_INIT_FAIL);
else if (!volume.init(&sd2card)) else if (!volume.init(driver))
SERIAL_ERROR_MSG(STR_SD_VOL_INIT_FAIL); SERIAL_ERROR_MSG(STR_SD_VOL_INIT_FAIL);
else if (!root.openRoot(&volume)) else if (!root.openRoot(&volume))
SERIAL_ERROR_MSG(STR_SD_OPENROOT_FAIL); SERIAL_ERROR_MSG(STR_SD_OPENROOT_FAIL);

43
Marlin/src/sd/cardreader.h
View File

@ -42,6 +42,29 @@ extern const char M23_STR[], M24_STR[];
#define MAXPATHNAMELENGTH (1 + (MAXDIRNAMELENGTH + 1) * (MAX_DIR_DEPTH) + 1 + FILENAME_LENGTH) // "/" + N * ("ADIRNAME/") + "filename.ext" #define MAXPATHNAMELENGTH (1 + (MAXDIRNAMELENGTH + 1) * (MAX_DIR_DEPTH) + 1 + FILENAME_LENGTH) // "/" + N * ("ADIRNAME/") + "filename.ext"
#include "SdFile.h" #include "SdFile.h"
#include "disk_io_driver.h"
#if ENABLED(USB_FLASH_DRIVE_SUPPORT)
#include "usb_flashdrive/Sd2Card_FlashDrive.h"
#endif
#if NEED_SD2CARD_SDIO
#include "Sd2Card_sdio.h"
#elif NEED_SD2CARD_SPI
#include "Sd2Card.h"
#endif
#if ENABLED(MULTI_VOLUME)
#define SV_SD_ONBOARD 1
#define SV_USB_FLASH_DRIVE 2
#define _VOLUME_ID(N) _CAT(SV_, N)
#define SHARED_VOLUME_IS(N) (DEFAULT_SHARED_VOLUME == _VOLUME_ID(N))
#if !SHARED_VOLUME_IS(SD_ONBOARD) && !SHARED_VOLUME_IS(USB_FLASH_DRIVE)
#error "DEFAULT_SHARED_VOLUME must be either SD_ONBOARD or USB_FLASH_DRIVE."
#endif
#else
#define SHARED_VOLUME_IS(...) 0
#endif
typedef struct { typedef struct {
bool saving:1, bool saving:1,
@ -80,6 +103,8 @@ public:
CardReader(); CardReader();
static void changeMedia(DiskIODriver *_driver) { driver = _driver; }
static SdFile getroot() { return root; } static SdFile getroot() { return root; }
static void mount(); static void mount();
@ -171,7 +196,8 @@ public:
static inline int16_t read(void *buf, uint16_t nbyte) { return file.isOpen() ? file.read(buf, nbyte) : -1; } static inline int16_t read(void *buf, uint16_t nbyte) { return file.isOpen() ? file.read(buf, nbyte) : -1; }
static inline int16_t write(void *buf, uint16_t nbyte) { return file.isOpen() ? file.write(buf, nbyte) : -1; } static inline int16_t write(void *buf, uint16_t nbyte) { return file.isOpen() ? file.write(buf, nbyte) : -1; }
static Sd2Card& getSd2Card() { return sd2card; } // TODO: rename to diskIODriver()
static DiskIODriver* diskIODriver() { return driver; }
#if ENABLED(AUTO_REPORT_SD_STATUS) #if ENABLED(AUTO_REPORT_SD_STATUS)
// //
@ -181,6 +207,15 @@ public:
static AutoReporter<AutoReportSD> auto_reporter; static AutoReporter<AutoReportSD> auto_reporter;
#endif #endif
#if SHARED_VOLUME_IS(USB_FLASH_DRIVE) || ENABLED(USB_FLASH_DRIVE_SUPPORT)
static DiskIODriver_USBFlash media_usbFlashDrive;
#endif
#if NEED_SD2CARD_SDIO
static DiskIODriver_SDIO media_sdio;
#elif NEED_SD2CARD_SPI
static DiskIODriver_SPI_SD media_sd_spi;
#endif
private: private:
// //
// Working directory and parents // Working directory and parents
@ -236,7 +271,7 @@ private:
#if ENABLED(SDSORT_DYNAMIC_RAM) #if ENABLED(SDSORT_DYNAMIC_RAM)
static uint8_t *isDir; static uint8_t *isDir;
#elif ENABLED(SDSORT_CACHE_NAMES) || DISABLED(SDSORT_USES_STACK) #elif ENABLED(SDSORT_CACHE_NAMES) || DISABLED(SDSORT_USES_STACK)
static uint8_t isDir[(SDSORT_LIMIT+7)>>3]; static uint8_t isDir[(SDSORT_LIMIT + 7) >> 3];
#endif #endif
#endif #endif
@ -244,7 +279,7 @@ private:
#endif // SDCARD_SORT_ALPHA #endif // SDCARD_SORT_ALPHA
static Sd2Card sd2card; static DiskIODriver *driver;
static SdVolume volume; static SdVolume volume;
static SdFile file; static SdFile file;
@ -275,7 +310,7 @@ private:
}; };
#if ENABLED(USB_FLASH_DRIVE_SUPPORT) #if ENABLED(USB_FLASH_DRIVE_SUPPORT)
#define IS_SD_INSERTED() Sd2Card::isInserted() #define IS_SD_INSERTED() DiskIODriver_USBFlash::isInserted()
#elif PIN_EXISTS(SD_DETECT) #elif PIN_EXISTS(SD_DETECT)
#define IS_SD_INSERTED() (READ(SD_DETECT_PIN) == SD_DETECT_STATE) #define IS_SD_INSERTED() (READ(SD_DETECT_PIN) == SD_DETECT_STATE)
#else #else

67
Marlin/src/sd/disk_io_driver.h Normal file
View File

@ -0,0 +1,67 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include <stdint.h>
/**
* DiskIO Interace
*
* Interface for low level disk io
*/
class DiskIODriver {
public:
/**
* Initialize an SD flash memory card with default clock rate and chip
* select pin. See sd2Card::init(uint8_t sckRateID, uint8_t chipSelectPin).
*
* \return true for success or false for failure.
*/
virtual bool init(const uint8_t sckRateID, const pin_t chipSelectPin) = 0; //TODO: only for SPI
/**
* Read a card's CSD register. The CSD contains Card-Specific Data that
* provides information regarding access to the card's contents.
*
* \param[out] csd pointer to area for returned data.
*
* \return true for success or false for failure.
*/
virtual bool readCSD(csd_t* csd) = 0;
virtual bool readStart(const uint32_t block) = 0;
virtual bool readData(uint8_t* dst) = 0;
virtual bool readStop() = 0;
virtual bool writeStart(const uint32_t block, const uint32_t) = 0;
virtual bool writeData(const uint8_t* src) = 0;
virtual bool writeStop() = 0;
virtual bool readBlock(uint32_t block, uint8_t* dst) = 0;
virtual bool writeBlock(uint32_t blockNumber, const uint8_t* src) = 0;
virtual uint32_t cardSize() = 0;
virtual bool isReady() = 0;
virtual void idle() = 0;
};

18
Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp
View File

@ -121,7 +121,7 @@ static enum {
uint32_t lun0_capacity; uint32_t lun0_capacity;
#endif #endif
bool Sd2Card::usbStartup() { bool DiskIODriver_USBFlash::usbStartup() {
if (state <= DO_STARTUP) { if (state <= DO_STARTUP) {
SERIAL_ECHOPGM("Starting USB host..."); SERIAL_ECHOPGM("Starting USB host...");
if (!UHS_START) { if (!UHS_START) {
@ -147,7 +147,7 @@ bool Sd2Card::usbStartup() {
// the USB library to monitor for such events. This function also takes care // the USB library to monitor for such events. This function also takes care
// of initializing the USB library for the first time. // of initializing the USB library for the first time.
void Sd2Card::idle() { void DiskIODriver_USBFlash::idle() {
usb.Task(); usb.Task();
const uint8_t task_state = usb.getUsbTaskState(); const uint8_t task_state = usb.getUsbTaskState();
@ -258,16 +258,16 @@ void Sd2Card::idle() {
// Marlin calls this function to check whether an USB drive is inserted. // Marlin calls this function to check whether an USB drive is inserted.
// This is equivalent to polling the SD_DETECT when using SD cards. // This is equivalent to polling the SD_DETECT when using SD cards.
bool Sd2Card::isInserted() { bool DiskIODriver_USBFlash::isInserted() {
return state == MEDIA_READY; return state == MEDIA_READY;
} }
bool Sd2Card::isReady() { bool DiskIODriver_USBFlash::isReady() {
return state > DO_STARTUP; return state > DO_STARTUP && usb.getUsbTaskState() == UHS_STATE(RUNNING);
} }
// Marlin calls this to initialize an SD card once it is inserted. // Marlin calls this to initialize an SD card once it is inserted.
bool Sd2Card::init(const uint8_t, const pin_t) { bool DiskIODriver_USBFlash::init(const uint8_t, const pin_t) {
if (!isInserted()) return false; if (!isInserted()) return false;
#if USB_DEBUG >= 1 #if USB_DEBUG >= 1
@ -286,7 +286,7 @@ bool Sd2Card::init(const uint8_t, const pin_t) {
} }
// Returns the capacity of the card in blocks. // Returns the capacity of the card in blocks.
uint32_t Sd2Card::cardSize() { uint32_t DiskIODriver_USBFlash::cardSize() {
if (!isInserted()) return false; if (!isInserted()) return false;
#if USB_DEBUG < 3 #if USB_DEBUG < 3
const uint32_t const uint32_t
@ -295,7 +295,7 @@ uint32_t Sd2Card::cardSize() {
return lun0_capacity; return lun0_capacity;
} }
bool Sd2Card::readBlock(uint32_t block, uint8_t *dst) { bool DiskIODriver_USBFlash::readBlock(uint32_t block, uint8_t *dst) {
if (!isInserted()) return false; if (!isInserted()) return false;
#if USB_DEBUG >= 3 #if USB_DEBUG >= 3
if (block >= lun0_capacity) { if (block >= lun0_capacity) {
@ -309,7 +309,7 @@ bool Sd2Card::readBlock(uint32_t block, uint8_t *dst) {
return bulk.Read(0, block, 512, 1, dst) == 0; return bulk.Read(0, block, 512, 1, dst) == 0;
} }
bool Sd2Card::writeBlock(uint32_t block, const uint8_t *src) { bool DiskIODriver_USBFlash::writeBlock(uint32_t block, const uint8_t *src) {
if (!isInserted()) return false; if (!isInserted()) return false;
#if USB_DEBUG >= 3 #if USB_DEBUG >= 3
if (block >= lun0_capacity) { if (block >= lun0_capacity) {

44
Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.h
View File

@ -27,6 +27,7 @@
*/ */
#include "../SdFatConfig.h" #include "../SdFatConfig.h"
#include "../SdInfo.h" #include "../SdInfo.h"
#include "../disk_io_driver.h"
#if DISABLED(USE_OTG_USB_HOST) #if DISABLED(USE_OTG_USB_HOST)
/** /**
@ -46,7 +47,7 @@
#endif #endif
#endif #endif
class Sd2Card { class DiskIODriver_USBFlash : public DiskIODriver {
private: private:
uint32_t pos; uint32_t pos;
@ -54,25 +55,26 @@ class Sd2Card {
public: public:
static bool usbStartup(); static bool usbStartup();
bool init(const uint8_t sckRateID=0, const pin_t chipSelectPin=TERN(USE_OTG_USB_HOST, 0, SD_CHIP_SELECT_PIN));
static void idle();
inline bool readStart(const uint32_t block) { pos = block; return isReady(); }
inline bool readData(uint8_t *dst) { return readBlock(pos++, dst); }
inline bool readStop() const { return true; }
inline bool writeStart(const uint32_t block, const uint32_t) { pos = block; return isReady(); }
inline bool writeData(uint8_t *src) { return writeBlock(pos++, src); }
inline bool writeStop() const { return true; }
bool readBlock(uint32_t block, uint8_t *dst);
bool writeBlock(uint32_t blockNumber, const uint8_t *src);
bool readCSD(csd_t*) { return true; }
uint32_t cardSize();
static bool isInserted(); static bool isInserted();
bool isReady();
bool init(const uint8_t sckRateID=0, const pin_t chipSelectPin=TERN(USE_OTG_USB_HOST, 0, SD_CHIP_SELECT_PIN)) override;
inline bool readCSD(csd_t*) override { return true; }
inline bool readStart(const uint32_t block) override { pos = block; return isReady(); }
inline bool readData(uint8_t *dst) override { return readBlock(pos++, dst); }
inline bool readStop() override { return true; }
inline bool writeStart(const uint32_t block, const uint32_t) override { pos = block; return isReady(); }
inline bool writeData(const uint8_t *src) override { return writeBlock(pos++, src); }
inline bool writeStop() override { return true; }
bool readBlock(uint32_t block, uint8_t *dst) override;
bool writeBlock(uint32_t blockNumber, const uint8_t *src) override;
uint32_t cardSize() override;
bool isReady() override;
void idle() override;
}; };