BLTOUCH probe config option

Marlin/Conditionals.h

@@ -368,6 +368,21 @@
     #define Z_HOME_POS (Z_HOME_DIR < 0 ? Z_MIN_POS : Z_MAX_POS)
   #endif //!MANUAL_HOME_POSITIONS
 
+  /**
+   * The BLTouch Probe emulates a servo probe
+   */
+  #if ENABLED(BLTOUCH)
+    #undef Z_ENDSTOP_SERVO_NR
+    #undef Z_SERVO_ANGLES
+    #define Z_ENDSTOP_SERVO_NR 0
+    #define Z_SERVO_ANGLES {10,90} // For BLTouch 10=deploy, 90=retract
+    #undef DEACTIVATE_SERVOS_AFTER_MOVE
+    #if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
+      #undef Z_MIN_ENDSTOP_INVERTING
+      #define Z_MIN_ENDSTOP_INVERTING false
+    #endif
+  #endif
+
   /**
    * Auto Bed Leveling and Z Probe Repeatability Test
    */

Marlin/Configuration.h

@@ -465,6 +465,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // its trigger-point if hardware endstops are active.
 //#define FIX_MOUNTED_PROBE
 
+// The BLTouch probe emulates a servo probe.
+//#define BLTOUCH
+
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0
 //#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles

Marlin/example_configurations/Cartesio/Configuration.h

@@ -465,6 +465,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // its trigger-point if hardware endstops are active.
 //#define FIX_MOUNTED_PROBE
 
+// The BLTouch probe emulates a servo probe.
+//#define BLTOUCH
+
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0
 //#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles

Marlin/example_configurations/Felix/Configuration.h

@@ -447,6 +447,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // its trigger-point if hardware endstops are active.
 //#define FIX_MOUNTED_PROBE
 
+// The BLTouch probe emulates a servo probe.
+//#define BLTOUCH
+
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0
 //#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles

Marlin/example_configurations/Felix/DUAL/Configuration.h

@@ -445,6 +445,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // its trigger-point if hardware endstops are active.
 //#define FIX_MOUNTED_PROBE
 
+// The BLTouch probe emulates a servo probe.
+//#define BLTOUCH
+
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0
 //#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles

Marlin/example_configurations/Hephestos/Configuration.h

@@ -457,6 +457,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 // its trigger-point if hardware endstops are active.
 //#define FIX_MOUNTED_PROBE
 
+// The BLTouch probe emulates a servo probe.
+//#define BLTOUCH
+
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0
 //#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles

Marlin/example_configurations/Hephestos_2/Configuration.h

@@ -459,6 +459,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // its trigger-point if hardware endstops are active.
 #define FIX_MOUNTED_PROBE
 
+// The BLTouch probe emulates a servo probe.
+//#define BLTOUCH
+
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0
 //#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles

Marlin/example_configurations/K8200/Configuration.h

@@ -482,6 +482,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // its trigger-point if hardware endstops are active.
 //#define FIX_MOUNTED_PROBE
 
+// The BLTouch probe emulates a servo probe.
+//#define BLTOUCH
+
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0
 //#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles

Marlin/example_configurations/K8400/Configuration.h

@@ -442,6 +442,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 // its trigger-point if hardware endstops are active.
 //#define FIX_MOUNTED_PROBE
 
+// The BLTouch probe emulates a servo probe.
+//#define BLTOUCH
+
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0
 //#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles

Marlin/example_configurations/K8400/Dual-head/Configuration.h

@@ -442,6 +442,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 // its trigger-point if hardware endstops are active.
 //#define FIX_MOUNTED_PROBE
 
+// The BLTouch probe emulates a servo probe.
+//#define BLTOUCH
+
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0
 //#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles

Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

@@ -465,6 +465,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // its trigger-point if hardware endstops are active.
 //#define FIX_MOUNTED_PROBE
 
+// The BLTouch probe emulates a servo probe.
+//#define BLTOUCH
+
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0
 //#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles

Marlin/example_configurations/RigidBot/Configuration.h

@@ -462,6 +462,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // its trigger-point if hardware endstops are active.
 //#define FIX_MOUNTED_PROBE
 
+// The BLTouch probe emulates a servo probe.
+//#define BLTOUCH
+
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0
 //#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles

Marlin/example_configurations/SCARA/Configuration.h

@@ -473,6 +473,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // its trigger-point if hardware endstops are active.
 //#define FIX_MOUNTED_PROBE
 
+// The BLTouch probe emulates a servo probe.
+//#define BLTOUCH
+
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0
 //#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles

Marlin/example_configurations/TAZ4/Configuration.h

@@ -486,6 +486,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // its trigger-point if hardware endstops are active.
 //#define FIX_MOUNTED_PROBE
 
+// The BLTouch probe emulates a servo probe.
+//#define BLTOUCH
+
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0
 //#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles

Marlin/example_configurations/WITBOX/Configuration.h

@@ -457,6 +457,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 // its trigger-point if hardware endstops are active.
 //#define FIX_MOUNTED_PROBE
 
+// The BLTouch probe emulates a servo probe.
+//#define BLTOUCH
+
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0
 //#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles

Marlin/example_configurations/adafruit/ST7565/Configuration.h

@@ -465,6 +465,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // its trigger-point if hardware endstops are active.
 //#define FIX_MOUNTED_PROBE
 
+// The BLTouch probe emulates a servo probe.
+//#define BLTOUCH
+
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0
 //#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles

Marlin/example_configurations/delta/biv2.5/Configuration.h

@@ -507,6 +507,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 // its trigger-point if hardware endstops are active.
 //#define FIX_MOUNTED_PROBE
 
+// The BLTouch probe emulates a servo probe.
+//#define BLTOUCH
+
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0
 //#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles

Marlin/example_configurations/delta/generic/Configuration.h

@@ -507,6 +507,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 // its trigger-point if hardware endstops are active.
 //#define FIX_MOUNTED_PROBE
 
+// The BLTouch probe emulates a servo probe.
+//#define BLTOUCH
+
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0
 //#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles

Marlin/example_configurations/delta/kossel_mini/Configuration.h

@@ -507,6 +507,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // its trigger-point if hardware endstops are active.
 //#define FIX_MOUNTED_PROBE
 
+// The BLTouch probe emulates a servo probe.
+//#define BLTOUCH
+
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0
 //#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles

Marlin/example_configurations/delta/kossel_pro/Configuration.h

@@ -496,6 +496,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // its trigger-point if hardware endstops are active.
 //#define FIX_MOUNTED_PROBE
 
+// The BLTouch probe emulates a servo probe.
+//#define BLTOUCH
+
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0
 //#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles

Marlin/example_configurations/delta/kossel_xl/Configuration.h

@@ -505,6 +505,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // its trigger-point if hardware endstops are active.
 #define FIX_MOUNTED_PROBE
 
+// The BLTouch probe emulates a servo probe.
+//#define BLTOUCH
+
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0
 //#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles

Marlin/example_configurations/makibox/Configuration.h

@@ -468,6 +468,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // its trigger-point if hardware endstops are active.
 //#define FIX_MOUNTED_PROBE
 
+// The BLTouch probe emulates a servo probe.
+//#define BLTOUCH
+
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0
 //#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles

Marlin/example_configurations/tvrrug/Round2/Configuration.h

@@ -455,6 +455,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 // its trigger-point if hardware endstops are active.
 //#define FIX_MOUNTED_PROBE
 
+// The BLTouch probe emulates a servo probe.
+//#define BLTOUCH
+
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0
 //#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles