Chitu board support (e.g., Tronxy X5s) (#15493)
This commit is contained in:
J.C. Nelson
Scott Lahteine
parent
408751d5e0
commit
167ecd8620
14
buildroot/share/PlatformIO/ldscripts/chitu_f103.ld
Normal file
14
buildroot/share/PlatformIO/ldscripts/chitu_f103.ld
Normal file
@ -0,0 +1,14 @@
|
||||
MEMORY
|
||||
{
|
||||
ram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
|
||||
rom (rx) : ORIGIN = 0x08008800, LENGTH = 512K - 32K
|
||||
}
|
||||
|
||||
/* Provide memory region aliases for common.inc */
|
||||
REGION_ALIAS("REGION_TEXT", rom);
|
||||
REGION_ALIAS("REGION_DATA", ram);
|
||||
REGION_ALIAS("REGION_BSS", ram);
|
||||
REGION_ALIAS("REGION_RODATA", rom);
|
||||
|
||||
/* Let common.inc handle the real work. */
|
||||
INCLUDE common.inc
|
||||
119
buildroot/share/PlatformIO/scripts/chitu_crypt.py
Normal file
119
buildroot/share/PlatformIO/scripts/chitu_crypt.py
Normal file
@ -0,0 +1,119 @@
|
||||
Import("env")
|
||||
import struct
|
||||
|
||||
# Relocate firmware from 0x08000000 to 0x08008800
|
||||
for define in env['CPPDEFINES']:
|
||||
if define[0] == "VECT_TAB_ADDR":
|
||||
env['CPPDEFINES'].remove(define)
|
||||
env['CPPDEFINES'].append(("VECT_TAB_ADDR", "0x8008800"))
|
||||
env.Replace(LDSCRIPT_PATH="buildroot/share/PlatformIO/ldscripts/chitu_f103.ld")
|
||||
|
||||
def calculate_crc(contents, seed):
|
||||
accumulating_xor_value = seed;
|
||||
|
||||
for i in range(0, len(contents), 4):
|
||||
value = struct.unpack('<I', contents[ i : i + 4])[0]
|
||||
accumulating_xor_value = accumulating_xor_value ^ value
|
||||
return accumulating_xor_value
|
||||
|
||||
def xor_block(r0, r1, block_number, block_size, file_key):
|
||||
# This is the loop counter
|
||||
loop_counter = 0x0
|
||||
|
||||
# This is the key length
|
||||
key_length = 0x18
|
||||
|
||||
# This is an initial seed
|
||||
xor_seed = 0x4bad
|
||||
|
||||
# This is the block counter
|
||||
block_number = xor_seed * block_number
|
||||
|
||||
#load the xor key from the file
|
||||
r7 = file_key
|
||||
|
||||
for loop_counter in range(0, block_size):
|
||||
# meant to make sure different bits of the key are used.
|
||||
xor_seed = int(loop_counter/key_length)
|
||||
|
||||
# IP is a scratch register / R12
|
||||
ip = loop_counter - (key_length * xor_seed)
|
||||
|
||||
# xor_seed = (loop_counter * loop_counter) + block_number
|
||||
xor_seed = (loop_counter * loop_counter) + block_number
|
||||
|
||||
# shift the xor_seed left by the bits in IP.
|
||||
xor_seed = xor_seed >> ip
|
||||
|
||||
# load a byte into IP
|
||||
ip = r0[loop_counter]
|
||||
|
||||
# XOR the seed with r7
|
||||
xor_seed = xor_seed ^ r7
|
||||
|
||||
# and then with IP
|
||||
xor_seed = xor_seed ^ ip
|
||||
|
||||
#Now store the byte back
|
||||
r1[loop_counter] = xor_seed & 0xFF
|
||||
|
||||
#increment the loop_counter
|
||||
loop_counter = loop_counter + 1
|
||||
|
||||
|
||||
def encrypt_file(input, output_file, file_length):
|
||||
input_file = bytearray(input.read())
|
||||
block_size = 0x800
|
||||
key_length = 0x18
|
||||
file_key = 0xDAB27F94
|
||||
|
||||
xor_crc = 0xef3d4323;
|
||||
|
||||
# the input file is exepcted to be in chunks of 0x800
|
||||
# so round the size
|
||||
while len(input_file) % block_size != 0:
|
||||
input_file.extend(b'0x0')
|
||||
|
||||
# write the file header
|
||||
output_file.write(struct.pack(">I", 0x443D2D3F))
|
||||
# encrypt the contents using a known file header key
|
||||
|
||||
# write the file_key
|
||||
output_file.write(struct.pack(">I", 0x947FB2DA))
|
||||
|
||||
#TODO - how to enforce that the firmware aligns to block boundaries?
|
||||
block_count = int(len(input_file) / block_size)
|
||||
print "Block Count is ", block_count
|
||||
for block_number in range(0, block_count):
|
||||
block_offset = (block_number * block_size)
|
||||
block_end = block_offset + block_size
|
||||
block_array = bytearray(input_file[block_offset: block_end])
|
||||
xor_block(block_array, block_array, block_number, block_size, file_key)
|
||||
for n in range (0, block_size):
|
||||
input_file[block_offset + n] = block_array[n]
|
||||
|
||||
# update the expected CRC value.
|
||||
xor_crc = calculate_crc(block_array, xor_crc)
|
||||
|
||||
# write CRC
|
||||
output_file.write(struct.pack("<I", xor_crc))
|
||||
|
||||
# finally, append the encrypted results.
|
||||
output_file.write(input_file)
|
||||
return
|
||||
|
||||
|
||||
# Encrypt ${PROGNAME}.bin and save it as 'update.cbd'
|
||||
def encrypt(source, target, env):
|
||||
import os
|
||||
|
||||
firmware = open(target[0].path, "rb")
|
||||
update = open(target[0].dir.path +'/update.cbd', "wb")
|
||||
length = os.path.getsize(target[0].path)
|
||||
|
||||
encrypt_file(firmware, update, length)
|
||||
|
||||
firmware.close()
|
||||
update.close()
|
||||
|
||||
env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", encrypt);
|
||||
@ -526,6 +526,33 @@ lib_ignore = Adafruit NeoPixel
|
||||
src_filter = ${common.default_src_filter} +<src/HAL/HAL_TEENSY31_32>
|
||||
monitor_speed = 250000
|
||||
|
||||
#
|
||||
# Malyan M200 (STM32F103CB)
|
||||
#
|
||||
[env:STM32F103CB_malyan]
|
||||
platform = ststm32
|
||||
framework = arduino
|
||||
board = malyanM200
|
||||
build_flags = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py -DMCU_STM32F103CB -D __STM32F1__=1 -std=c++1y -D MOTHERBOARD="BOARD_MALYAN_M200" -DSERIAL_USB -ffunction-sections -fdata-sections -Wl,--gc-sections
|
||||
-DDEBUG_LEVEL=0 -D__MARLIN_FIRMWARE__
|
||||
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
|
||||
lib_ignore = Adafruit NeoPixel, LiquidCrystal, LiquidTWI2, TMCStepper, U8glib-HAL, SPI
|
||||
|
||||
#
|
||||
# Chitu boards like Tronxy X5s (STM32F103ZET6)
|
||||
#
|
||||
[env:chitu_f103]
|
||||
platform = ststm32
|
||||
framework = arduino
|
||||
board = genericSTM32F103ZE
|
||||
extra_scripts = buildroot/share/PlatformIO/scripts/chitu_crypt.py
|
||||
build_flags = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py
|
||||
${common.build_flags} -DSTM32F1xx -std=gnu++14
|
||||
build_unflags = -std=gnu++11 -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG= -DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6
|
||||
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
|
||||
lib_deps = ${common.lib_deps}
|
||||
lib_ignore = Adafruit NeoPixel
|
||||
|
||||
#
|
||||
# Teensy 3.5 / 3.6 (ARM Cortex-M4)
|
||||
#
|
||||
@ -540,19 +567,6 @@ lib_ignore = Adafruit NeoPixel
|
||||
src_filter = ${common.default_src_filter} +<src/HAL/HAL_TEENSY35_36>
|
||||
monitor_speed = 250000
|
||||
|
||||
#
|
||||
# Malyan M200 (STM32F103CB)
|
||||
#
|
||||
[env:STM32F103CB_malyan]
|
||||
platform = ststm32
|
||||
framework = arduino
|
||||
board = malyanM200
|
||||
build_flags = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py -DMCU_STM32F103CB -D __STM32F1__=1 -std=c++1y -D MOTHERBOARD="BOARD_MALYAN_M200" -DSERIAL_USB -ffunction-sections -fdata-sections -Wl,--gc-sections
|
||||
-DDEBUG_LEVEL=0 -D__MARLIN_FIRMWARE__
|
||||
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
|
||||
#-<frameworks>
|
||||
lib_ignore = Adafruit NeoPixel, LiquidCrystal, LiquidTWI2, TMCStepper, U8glib-HAL, SPI
|
||||
|
||||
#
|
||||
# Espressif ESP32
|
||||
#
|
||||
|
||||
Loading…
Reference in New Issue
Block a user