From 1a79878dff2d4846b1f58a45b8880a346fb9cb41 Mon Sep 17 00:00:00 2001 From: teemuatlut Date: Sat, 12 Jan 2019 00:56:23 +0200 Subject: [PATCH] Remove TMC_Z_CALIBRATION in favor of Z_STEPPER_AUTO_ALIGN --- Marlin/Configuration_adv.h | 16 ------ Marlin/src/config/default/Configuration_adv.h | 16 ------ .../AlephObjects/TAZ4/Configuration_adv.h | 16 ------ .../examples/Anet/A2/Configuration_adv.h | 16 ------ .../examples/Anet/A2plus/Configuration_adv.h | 16 ------ .../examples/Anet/A6/Configuration_adv.h | 16 ------ .../examples/Anet/A8/Configuration_adv.h | 16 ------ .../config/examples/ArmEd/Configuration_adv.h | 16 ------ .../BIBO/TouchX/cyclops/Configuration_adv.h | 16 ------ .../BIBO/TouchX/default/Configuration_adv.h | 16 ------ .../examples/BQ/Hephestos/Configuration_adv.h | 16 ------ .../BQ/Hephestos_2/Configuration_adv.h | 16 ------ .../examples/BQ/WITBOX/Configuration_adv.h | 16 ------ .../examples/Cartesio/Configuration_adv.h | 16 ------ .../Creality/CR-10/Configuration_adv.h | 16 ------ .../Creality/CR-10S/Configuration_adv.h | 16 ------ .../Creality/CR-10mini/Configuration_adv.h | 16 ------ .../Creality/CR-8/Configuration_adv.h | 16 ------ .../Creality/Ender-2/Configuration_adv.h | 16 ------ .../Creality/Ender-3/Configuration_adv.h | 16 ------ .../Creality/Ender-4/Configuration_adv.h | 16 ------ .../examples/Einstart-S/Configuration_adv.h | 16 ------ .../config/examples/Felix/Configuration_adv.h | 16 ------ .../FolgerTech/i3-2020/Configuration_adv.h | 16 ------ .../Formbot/Raptor/Configuration_adv.h | 16 ------ .../Formbot/T_Rex_2+/Configuration_adv.h | 16 ------ .../Formbot/T_Rex_3/Configuration_adv.h | 16 ------ .../Geeetech/MeCreator2/Configuration_adv.h | 16 ------ .../Prusa i3 Pro C/Configuration_adv.h | 16 ------ .../Prusa i3 Pro W/Configuration_adv.h | 16 ------ .../Infitary/i3-M508/Configuration_adv.h | 16 ------ .../examples/JGAurora/A5/Configuration_adv.h | 16 ------ .../examples/MakerParts/Configuration_adv.h | 16 ------ .../examples/Malyan/M150/Configuration_adv.h | 16 ------ .../examples/Malyan/M200/Configuration_adv.h | 16 ------ .../Micromake/C1/enhanced/Configuration_adv.h | 16 ------ .../examples/Mks/Robin/Configuration_adv.h | 16 ------ .../examples/Mks/Sbase/Configuration_adv.h | 16 ------ .../examples/RigidBot/Configuration_adv.h | 16 ------ .../config/examples/SCARA/Configuration_adv.h | 16 ------ .../examples/Sanguinololu/Configuration_adv.h | 16 ------ .../examples/TheBorg/Configuration_adv.h | 16 ------ .../examples/TinyBoy2/Configuration_adv.h | 16 ------ .../examples/Tronxy/X3A/Configuration_adv.h | 16 ------ .../UltiMachine/Archim1/Configuration_adv.h | 16 ------ .../UltiMachine/Archim2/Configuration_adv.h | 16 ------ .../examples/VORONDesign/Configuration_adv.h | 16 ------ .../Velleman/K8200/Configuration_adv.h | 16 ------ .../Velleman/K8400/Configuration_adv.h | 16 ------ .../Wanhao/Duplicator 6/Configuration_adv.h | 16 ------ .../delta/Anycubic/Kossel/Configuration_adv.h | 16 ------ .../FLSUN/auto_calibrate/Configuration_adv.h | 16 ------ .../delta/FLSUN/kossel/Configuration_adv.h | 16 ------ .../FLSUN/kossel_mini/Configuration_adv.h | 16 ------ .../Geeetech/Rostock 301/Configuration_adv.h | 16 ------ .../delta/MKS/SBASE/Configuration_adv.h | 16 ------ .../Tevo Little Monster/Configuration_adv.h | 16 ------ .../delta/generic/Configuration_adv.h | 16 ------ .../delta/kossel_mini/Configuration_adv.h | 16 ------ .../delta/kossel_xl/Configuration_adv.h | 16 ------ .../gCreate/gMax1.5+/Configuration_adv.h | 16 ------ .../examples/makibox/Configuration_adv.h | 16 ------ .../tvrrug/Round2/Configuration_adv.h | 16 ------ .../config/examples/wt150/Configuration_adv.h | 16 ------ .../trinamic/{M911-M915.cpp => M911-M914.cpp} | 50 ------------------- Marlin/src/gcode/gcode.cpp | 3 -- Marlin/src/gcode/gcode.h | 3 -- Marlin/src/inc/SanityCheck.h | 4 +- Marlin/src/lcd/language/language_an.h | 1 - Marlin/src/lcd/language/language_bg.h | 1 - Marlin/src/lcd/language/language_ca.h | 1 - Marlin/src/lcd/language/language_cz.h | 1 - Marlin/src/lcd/language/language_da.h | 1 - Marlin/src/lcd/language/language_de.h | 1 - Marlin/src/lcd/language/language_el-gr.h | 1 - Marlin/src/lcd/language/language_el.h | 1 - Marlin/src/lcd/language/language_en.h | 3 -- Marlin/src/lcd/language/language_es.h | 1 - Marlin/src/lcd/language/language_eu.h | 1 - Marlin/src/lcd/language/language_fi.h | 1 - Marlin/src/lcd/language/language_fr.h | 1 - Marlin/src/lcd/language/language_gl.h | 1 - Marlin/src/lcd/language/language_hr.h | 1 - Marlin/src/lcd/language/language_it.h | 1 - Marlin/src/lcd/language/language_jp-kana.h | 1 - Marlin/src/lcd/language/language_ko_KR.h | 1 - Marlin/src/lcd/language/language_nl.h | 1 - Marlin/src/lcd/language/language_pl.h | 1 - Marlin/src/lcd/language/language_pt-br.h | 1 - Marlin/src/lcd/language/language_pt.h | 1 - Marlin/src/lcd/language/language_ru.h | 1 - Marlin/src/lcd/language/language_sk.h | 1 - Marlin/src/lcd/language/language_tr.h | 1 - Marlin/src/lcd/language/language_uk.h | 1 - Marlin/src/lcd/language/language_zh_CN.h | 1 - Marlin/src/lcd/language/language_zh_TW.h | 1 - Marlin/src/lcd/menu/menu_motion.cpp | 7 --- 97 files changed, 2 insertions(+), 1119 deletions(-) rename Marlin/src/gcode/feature/trinamic/{M911-M915.cpp => M911-M914.cpp} (89%) diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 25ec655a4..faa711002 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -1480,22 +1480,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/default/Configuration_adv.h b/Marlin/src/config/default/Configuration_adv.h index 25ec655a4..faa711002 100755 --- a/Marlin/src/config/default/Configuration_adv.h +++ b/Marlin/src/config/default/Configuration_adv.h @@ -1480,22 +1480,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h index a505ca9b0..a8dc9e26a 100644 --- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h +++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h @@ -1479,22 +1479,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/Anet/A2/Configuration_adv.h b/Marlin/src/config/examples/Anet/A2/Configuration_adv.h index 5efa35f32..d35870501 100644 --- a/Marlin/src/config/examples/Anet/A2/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A2/Configuration_adv.h @@ -1479,22 +1479,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h b/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h index 5efa35f32..d35870501 100644 --- a/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h @@ -1479,22 +1479,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h index 52291cde1..b0f53fe10 100644 --- a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h @@ -1478,22 +1478,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h index 50413ec6f..1c4755c77 100644 --- a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h @@ -1479,22 +1479,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/ArmEd/Configuration_adv.h b/Marlin/src/config/examples/ArmEd/Configuration_adv.h index f6eb65317..03c9ac49f 100644 --- a/Marlin/src/config/examples/ArmEd/Configuration_adv.h +++ b/Marlin/src/config/examples/ArmEd/Configuration_adv.h @@ -1453,22 +1453,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 3ca6432c7..ebd34d1d7 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -1478,22 +1478,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h index 04012fcdf..6efff2e67 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -1479,22 +1479,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h index 4088fb510..fa241ad96 100644 --- a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h @@ -1479,22 +1479,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h index ddf0e28a6..f231004c2 100644 --- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -1487,22 +1487,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h index 4088fb510..fa241ad96 100644 --- a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h @@ -1479,22 +1479,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/Cartesio/Configuration_adv.h b/Marlin/src/config/examples/Cartesio/Configuration_adv.h index 0be82a99d..1d016f0f3 100644 --- a/Marlin/src/config/examples/Cartesio/Configuration_adv.h +++ b/Marlin/src/config/examples/Cartesio/Configuration_adv.h @@ -1479,22 +1479,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h index 42c098888..2bb25d99f 100755 --- a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h @@ -1479,22 +1479,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h index c3599eb70..73187c89c 100644 --- a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h @@ -1479,22 +1479,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h index 0b2df5ace..1c8675cb9 100644 --- a/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h @@ -1479,22 +1479,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h index ab94bb372..1e7448609 100644 --- a/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h @@ -1479,22 +1479,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h index 6d8ad819d..0d4ccc9ef 100644 --- a/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h @@ -1479,22 +1479,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h index 9f4783d3e..461a1b1e5 100644 --- a/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h @@ -1479,22 +1479,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h index 15e753870..c895b5af2 100644 --- a/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h @@ -1479,22 +1479,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/Einstart-S/Configuration_adv.h b/Marlin/src/config/examples/Einstart-S/Configuration_adv.h index 8e723b5c0..03b9f5fd7 100644 --- a/Marlin/src/config/examples/Einstart-S/Configuration_adv.h +++ b/Marlin/src/config/examples/Einstart-S/Configuration_adv.h @@ -1479,22 +1479,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/Felix/Configuration_adv.h b/Marlin/src/config/examples/Felix/Configuration_adv.h index 1aa306536..c81d8b083 100644 --- a/Marlin/src/config/examples/Felix/Configuration_adv.h +++ b/Marlin/src/config/examples/Felix/Configuration_adv.h @@ -1479,22 +1479,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h index ec6eb7bc2..850af77a4 100644 --- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -1479,22 +1479,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h b/Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h index 7f9d63071..f3f1dffff 100644 --- a/Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h @@ -1481,22 +1481,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index 306d4c9cc..e7dc8678f 100644 --- a/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -1484,22 +1484,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h index 3e771dfdc..ba25ab713 100644 --- a/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -1484,22 +1484,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h index e34e37853..0c38cfb2c 100644 --- a/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -1480,22 +1480,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index d66c99e7d..bd0b4e250 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -1479,22 +1479,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index d66c99e7d..bd0b4e250 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -1479,22 +1479,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h index 43918b0e0..b50fc49ec 100644 --- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -1479,22 +1479,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h index 7c0222bb5..1ee5c7c15 100644 --- a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h +++ b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h @@ -1479,22 +1479,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/MakerParts/Configuration_adv.h b/Marlin/src/config/examples/MakerParts/Configuration_adv.h index 85beaa8fb..334dda831 100644 --- a/Marlin/src/config/examples/MakerParts/Configuration_adv.h +++ b/Marlin/src/config/examples/MakerParts/Configuration_adv.h @@ -1479,22 +1479,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h index 6ab3697cb..5d2a93dcc 100644 --- a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h +++ b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h @@ -1479,22 +1479,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h index ca7c5ca7c..6f91d8e24 100644 --- a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h +++ b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h @@ -1479,22 +1479,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h index 0ff5f76a2..256ef6863 100644 --- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -1479,22 +1479,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/Mks/Robin/Configuration_adv.h b/Marlin/src/config/examples/Mks/Robin/Configuration_adv.h index 01207d3ab..00eb5fbec 100644 --- a/Marlin/src/config/examples/Mks/Robin/Configuration_adv.h +++ b/Marlin/src/config/examples/Mks/Robin/Configuration_adv.h @@ -1480,22 +1480,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h index 393edceb4..b8d47ad82 100644 --- a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h +++ b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h @@ -1487,22 +1487,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/RigidBot/Configuration_adv.h b/Marlin/src/config/examples/RigidBot/Configuration_adv.h index de062d7e3..ba5e1f13a 100644 --- a/Marlin/src/config/examples/RigidBot/Configuration_adv.h +++ b/Marlin/src/config/examples/RigidBot/Configuration_adv.h @@ -1479,22 +1479,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/SCARA/Configuration_adv.h b/Marlin/src/config/examples/SCARA/Configuration_adv.h index dcca0eadc..d13b74fc6 100644 --- a/Marlin/src/config/examples/SCARA/Configuration_adv.h +++ b/Marlin/src/config/examples/SCARA/Configuration_adv.h @@ -1479,22 +1479,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h index 4c1e4ea17..6b299f4ca 100644 --- a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h +++ b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h @@ -1479,22 +1479,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/TheBorg/Configuration_adv.h b/Marlin/src/config/examples/TheBorg/Configuration_adv.h index b5ec4b6b8..c94c859e2 100644 --- a/Marlin/src/config/examples/TheBorg/Configuration_adv.h +++ b/Marlin/src/config/examples/TheBorg/Configuration_adv.h @@ -1479,22 +1479,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h index 7a54b52c5..c52b37bb9 100644 --- a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h +++ b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h @@ -1479,22 +1479,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h b/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h index cb59d0144..eb4fd82ca 100644 --- a/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h @@ -1479,22 +1479,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h index a8ebcd0ce..8814c5f39 100644 --- a/Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -1480,22 +1480,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h index 110798895..b6971b568 100644 --- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -1479,22 +1479,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/VORONDesign/Configuration_adv.h b/Marlin/src/config/examples/VORONDesign/Configuration_adv.h index 2613067a0..cede5e5a5 100644 --- a/Marlin/src/config/examples/VORONDesign/Configuration_adv.h +++ b/Marlin/src/config/examples/VORONDesign/Configuration_adv.h @@ -1480,22 +1480,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h index ab4865d4c..cac9ccebb 100644 --- a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h +++ b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h @@ -1492,22 +1492,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h index 5cbde84ec..c89864b10 100644 --- a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h +++ b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h @@ -1479,22 +1479,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index b94637a1b..f05c4f2c0 100644 --- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -1481,22 +1481,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index 7633d4e26..5448b034f 100644 --- a/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -1481,22 +1481,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index c9926bcb6..d654a7ae5 100644 --- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -1481,22 +1481,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h index c9926bcb6..d654a7ae5 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -1481,22 +1481,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index d36ea2ec4..e6e981bd8 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -1481,22 +1481,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index 7fd887b45..6ce497c2d 100644 --- a/Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -1454,22 +1454,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h b/Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h index 4d2031422..431005b5d 100644 --- a/Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -1481,22 +1481,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h index 4a6179d2a..099afcf43 100644 --- a/Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -1481,22 +1481,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/delta/generic/Configuration_adv.h b/Marlin/src/config/examples/delta/generic/Configuration_adv.h index d36ea2ec4..e6e981bd8 100644 --- a/Marlin/src/config/examples/delta/generic/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/generic/Configuration_adv.h @@ -1481,22 +1481,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h index d36ea2ec4..e6e981bd8 100644 --- a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h @@ -1481,22 +1481,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h index ef13bc321..a59aafb7b 100644 --- a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h @@ -1481,22 +1481,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h index 5c45b876e..8f9bd831a 100644 --- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -1479,22 +1479,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/makibox/Configuration_adv.h b/Marlin/src/config/examples/makibox/Configuration_adv.h index e1b192b1c..c85a13480 100644 --- a/Marlin/src/config/examples/makibox/Configuration_adv.h +++ b/Marlin/src/config/examples/makibox/Configuration_adv.h @@ -1479,22 +1479,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h index d4cb2606c..a74920bdb 100644 --- a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h @@ -1479,22 +1479,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/config/examples/wt150/Configuration_adv.h b/Marlin/src/config/examples/wt150/Configuration_adv.h index 52b99e692..1e08eb58c 100644 --- a/Marlin/src/config/examples/wt150/Configuration_adv.h +++ b/Marlin/src/config/examples/wt150/Configuration_adv.h @@ -1480,22 +1480,6 @@ */ //#define TMC_DEBUG - /** - * M915 Z Axis Calibration - * - * - Adjust Z stepper current, - * - Drive the Z axis to its physical maximum, and - * - Home Z to account for the lost steps. - * - * Use M915 Snn to specify the current. - * Use M925 Znn to add extra Z height to Z_MAX_POS. - */ - //#define TMC_Z_CALIBRATION - #if ENABLED(TMC_Z_CALIBRATION) - #define CALIBRATION_CURRENT 250 - #define CALIBRATION_EXTRA_HEIGHT 10 - #endif - /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page diff --git a/Marlin/src/gcode/feature/trinamic/M911-M915.cpp b/Marlin/src/gcode/feature/trinamic/M911-M914.cpp similarity index 89% rename from Marlin/src/gcode/feature/trinamic/M911-M915.cpp rename to Marlin/src/gcode/feature/trinamic/M911-M914.cpp index ee134067e..dc9640925 100644 --- a/Marlin/src/gcode/feature/trinamic/M911-M915.cpp +++ b/Marlin/src/gcode/feature/trinamic/M911-M914.cpp @@ -384,54 +384,4 @@ } #endif // USE_SENSORLESS -/** - * TMC Z axis calibration routine - */ -#if ENABLED(TMC_Z_CALIBRATION) - void GcodeSuite::M915() { - const uint16_t _rms = parser.seenval('S') ? parser.value_int() : CALIBRATION_CURRENT, - _z = parser.seenval('Z') ? parser.value_linear_units() : CALIBRATION_EXTRA_HEIGHT; - - if (!TEST(axis_known_position, Z_AXIS)) { - SERIAL_ECHOLNPGM("\nPlease home Z axis first"); - return; - } - - #if AXIS_IS_TMC(Z) - const uint16_t Z_current_1 = stepperZ.getMilliamps(); - stepperZ.rms_current(_rms); - #endif - #if AXIS_IS_TMC(Z2) - const uint16_t Z2_current_1 = stepperZ2.getMilliamps(); - stepperZ2.rms_current(_rms); - #endif - #if AXIS_IS_TMC(Z3) - const uint16_t Z3_current_1 = stepperZ3.getMilliamps(); - stepperZ3.rms_current(_rms); - #endif - - SERIAL_ECHOPAIR("\nCalibration current: Z", _rms); - - soft_endstops_enabled = false; - - do_blocking_move_to_z(Z_MAX_POS+_z); - - #if AXIS_IS_TMC(Z) - stepperZ.rms_current(Z_current_1); - #endif - #if AXIS_IS_TMC(Z2) - stepperZ2.rms_current(Z2_current_1); - #endif - #if AXIS_IS_TMC(Z3) - stepperZ3.rms_current(Z3_current_1); - #endif - - do_blocking_move_to_z(Z_MAX_POS); - soft_endstops_enabled = true; - - SERIAL_ECHOLNPGM("\nHoming Z because we lost steps"); - enqueue_and_echo_commands_P(PSTR("G28 Z")); - } -#endif - #endif // HAS_TRINAMIC diff --git a/Marlin/src/gcode/gcode.cpp b/Marlin/src/gcode/gcode.cpp index f8ad8864a..9833f2d12 100644 --- a/Marlin/src/gcode/gcode.cpp +++ b/Marlin/src/gcode/gcode.cpp @@ -662,9 +662,6 @@ void GcodeSuite::process_parsed_command( #if USE_SENSORLESS case 914: M914(); break; // M914: Set StallGuard sensitivity. #endif - #if ENABLED(TMC_Z_CALIBRATION) - case 915: M915(); break; // M915: TMC Z axis calibration. - #endif #endif #if HAS_MICROSTEPS diff --git a/Marlin/src/gcode/gcode.h b/Marlin/src/gcode/gcode.h index a3f197c78..bce726f26 100644 --- a/Marlin/src/gcode/gcode.h +++ b/Marlin/src/gcode/gcode.h @@ -804,9 +804,6 @@ private: #if USE_SENSORLESS static void M914(); #endif - #if ENABLED(TMC_Z_CALIBRATION) - static void M915(); - #endif #endif #if HAS_DIGIPOTSS || HAS_MOTOR_CURRENT_PWM || ENABLED(DIGIPOT_I2C) || ENABLED(DAC_STEPPER_CURRENT) diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h index b848b751c..235071a00 100644 --- a/Marlin/src/inc/SanityCheck.h +++ b/Marlin/src/inc/SanityCheck.h @@ -341,6 +341,8 @@ #error "MAX6675_SS is now MAX6675_SS_PIN. Please update your configuration and/or pins." #elif defined(MAX6675_SS2) #error "MAX6675_SS2 is now MAX6675_SS2_PIN. Please update your configuration and/or pins." +#elif defined(TMC_Z_CALIBRATION) + #error "TMC_Z_CALIBRATION has been deprecated in favor of Z_STEPPER_AUTO_ALIGN. Please update your configuration." #endif #define BOARD_MKS_13 -47 @@ -1884,8 +1886,6 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS // Other TMC feature requirements #if ENABLED(HYBRID_THRESHOLD) && !STEALTHCHOP_ENABLED #error "Enable STEALTHCHOP_(XY|Z|E) to use HYBRID_THRESHOLD." -#elif ENABLED(TMC_Z_CALIBRATION) && !AXIS_IS_TMC(Z) && !AXIS_IS_TMC(Z2) && !AXIS_IS_TMC(Z3) - #error "TMC_Z_CALIBRATION requires at least one TMC driver on Z axis" #elif ENABLED(SENSORLESS_HOMING) && !HAS_STALLGUARD #error "SENSORLESS_HOMING requires TMC2130 stepper drivers." #elif ENABLED(SENSORLESS_PROBING) && !HAS_STALLGUARD diff --git a/Marlin/src/lcd/language/language_an.h b/Marlin/src/lcd/language/language_an.h index 849f30f9b..748ab8484 100644 --- a/Marlin/src/lcd/language/language_an.h +++ b/Marlin/src/lcd/language/language_an.h @@ -43,7 +43,6 @@ #define MSG_AUTO_HOME_X _UxGT("Orichen X") #define MSG_AUTO_HOME_Y _UxGT("Orichen Y") #define MSG_AUTO_HOME_Z _UxGT("Orichen Z") -#define MSG_TMC_Z_CALIBRATION _UxGT("Calibrar Z") #define MSG_LEVEL_BED_HOMING _UxGT("Orichen XYZ") #define MSG_LEVEL_BED_WAITING _UxGT("Encetar (pretar)") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Vinient punto") diff --git a/Marlin/src/lcd/language/language_bg.h b/Marlin/src/lcd/language/language_bg.h index 3409e770d..c826425bf 100644 --- a/Marlin/src/lcd/language/language_bg.h +++ b/Marlin/src/lcd/language/language_bg.h @@ -38,7 +38,6 @@ #define MSG_AUTOSTART _UxGT("Автостарт") #define MSG_DISABLE_STEPPERS _UxGT("Изкл. двигатели") #define MSG_AUTO_HOME _UxGT("Паркиране") -#define MSG_TMC_Z_CALIBRATION _UxGT("Калибровка Z") #define MSG_SET_HOME_OFFSETS _UxGT("Задай Начало") #define MSG_SET_ORIGIN _UxGT("Изходна точка") #define MSG_PREHEAT_1 _UxGT("Подгряване " PREHEAT_1_LABEL) diff --git a/Marlin/src/lcd/language/language_ca.h b/Marlin/src/lcd/language/language_ca.h index c871bdee0..6875301ac 100644 --- a/Marlin/src/lcd/language/language_ca.h +++ b/Marlin/src/lcd/language/language_ca.h @@ -44,7 +44,6 @@ #define MSG_AUTO_HOME_X _UxGT("X a origen") #define MSG_AUTO_HOME_Y _UxGT("Y a origen") #define MSG_AUTO_HOME_Z _UxGT("Z a origen") -#define MSG_TMC_Z_CALIBRATION _UxGT("Calibra Z") #define MSG_LEVEL_BED_HOMING _UxGT("Origen XYZ") #define MSG_LEVEL_BED_WAITING _UxGT("Premeu per iniciar") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Següent punt") diff --git a/Marlin/src/lcd/language/language_cz.h b/Marlin/src/lcd/language/language_cz.h index 8fb615cff..0a9a97452 100644 --- a/Marlin/src/lcd/language/language_cz.h +++ b/Marlin/src/lcd/language/language_cz.h @@ -56,7 +56,6 @@ #define MSG_AUTO_HOME_X _UxGT("Domů osa X") #define MSG_AUTO_HOME_Y _UxGT("Domů osa Y") #define MSG_AUTO_HOME_Z _UxGT("Domů osa Z") -#define MSG_TMC_Z_CALIBRATION _UxGT("Kalibrovat Z") #define MSG_LEVEL_BED_HOMING _UxGT("Měření podložky") #define MSG_LEVEL_BED_WAITING _UxGT("Kliknutím spusťte") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Další bod") diff --git a/Marlin/src/lcd/language/language_da.h b/Marlin/src/lcd/language/language_da.h index 2dcea9ee4..2a1626411 100644 --- a/Marlin/src/lcd/language/language_da.h +++ b/Marlin/src/lcd/language/language_da.h @@ -43,7 +43,6 @@ #define MSG_AUTO_HOME_X _UxGT("Home X") #define MSG_AUTO_HOME_Y _UxGT("Home Y") #define MSG_AUTO_HOME_Z _UxGT("Home Z") -#define MSG_TMC_Z_CALIBRATION _UxGT("Kalibrer Z") #define MSG_LEVEL_BED_HOMING _UxGT("Homing XYZ") #define MSG_LEVEL_BED_WAITING _UxGT("Klik når du er klar") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Næste punkt") diff --git a/Marlin/src/lcd/language/language_de.h b/Marlin/src/lcd/language/language_de.h index f218efdd0..0b3724b6a 100644 --- a/Marlin/src/lcd/language/language_de.h +++ b/Marlin/src/lcd/language/language_de.h @@ -51,7 +51,6 @@ #define MSG_AUTO_HOME_Y _UxGT("Home Y") #define MSG_AUTO_HOME_Z _UxGT("Home Z") #define MSG_AUTO_Z_ALIGN _UxGT("Z-Achsen ausgleichen") -#define MSG_TMC_Z_CALIBRATION _UxGT("Kalibriere Z") #define MSG_LEVEL_BED_HOMING _UxGT("Home XYZ") #define MSG_LEVEL_BED_WAITING _UxGT("Klick zum Starten") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Nächste Koordinate") diff --git a/Marlin/src/lcd/language/language_el-gr.h b/Marlin/src/lcd/language/language_el-gr.h index 85c2b8211..b1ec2c9e4 100644 --- a/Marlin/src/lcd/language/language_el-gr.h +++ b/Marlin/src/lcd/language/language_el-gr.h @@ -43,7 +43,6 @@ #define MSG_AUTO_HOME_X _UxGT("Αρχικό σημείο X") #define MSG_AUTO_HOME_Y _UxGT("Αρχικό σημείο Y") #define MSG_AUTO_HOME_Z _UxGT("Αρχικό σημείο Z") -#define MSG_TMC_Z_CALIBRATION _UxGT("Βαθμονόμηση Z") #define MSG_LEVEL_BED_HOMING _UxGT("Επαναφορά στο αρχικό σημείο ΧΥΖ") #define MSG_LEVEL_BED_WAITING _UxGT("Κάντε κλικ για να ξεκινήσετε") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Επόμενο σημείο") diff --git a/Marlin/src/lcd/language/language_el.h b/Marlin/src/lcd/language/language_el.h index 38ae18cbf..89fb89f3c 100644 --- a/Marlin/src/lcd/language/language_el.h +++ b/Marlin/src/lcd/language/language_el.h @@ -43,7 +43,6 @@ #define MSG_AUTO_HOME_X _UxGT("Αρχικό σημείο X") #define MSG_AUTO_HOME_Y _UxGT("Αρχικό σημείο Y") #define MSG_AUTO_HOME_Z _UxGT("Αρχικό σημείο Z") -#define MSG_TMC_Z_CALIBRATION _UxGT("Βαθμονόμηση Z") #define MSG_LEVEL_BED_HOMING _UxGT("Επαναφορά Επ. Εκτύπωσης") //SHORTEN #define MSG_LEVEL_BED_WAITING _UxGT("Επιπεδοποίηση επ. Εκτύπωσης περιμενει") //SHORTEN #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Επόμενο σημείο") diff --git a/Marlin/src/lcd/language/language_en.h b/Marlin/src/lcd/language/language_en.h index 111e74564..a8ee0115e 100644 --- a/Marlin/src/lcd/language/language_en.h +++ b/Marlin/src/lcd/language/language_en.h @@ -103,9 +103,6 @@ #ifndef MSG_AUTO_Z_ALIGN #define MSG_AUTO_Z_ALIGN _UxGT("Auto Z-Align") #endif -#ifndef MSG_TMC_Z_CALIBRATION - #define MSG_TMC_Z_CALIBRATION _UxGT("Calibrate Z") -#endif #ifndef MSG_LEVEL_BED_HOMING #define MSG_LEVEL_BED_HOMING _UxGT("Homing XYZ") #endif diff --git a/Marlin/src/lcd/language/language_es.h b/Marlin/src/lcd/language/language_es.h index f216db91b..8ae7e4376 100644 --- a/Marlin/src/lcd/language/language_es.h +++ b/Marlin/src/lcd/language/language_es.h @@ -46,7 +46,6 @@ #define MSG_AUTO_HOME_X _UxGT("Origen X") #define MSG_AUTO_HOME_Y _UxGT("Origen Y") #define MSG_AUTO_HOME_Z _UxGT("Origen Z") -#define MSG_TMC_Z_CALIBRATION _UxGT("Calibrar Z") #define MSG_LEVEL_BED_HOMING _UxGT("Origen XYZ") #define MSG_LEVEL_BED_WAITING _UxGT("Iniciar (Presione)") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Siguiente punto") diff --git a/Marlin/src/lcd/language/language_eu.h b/Marlin/src/lcd/language/language_eu.h index a1771d917..17e7a0b1d 100644 --- a/Marlin/src/lcd/language/language_eu.h +++ b/Marlin/src/lcd/language/language_eu.h @@ -46,7 +46,6 @@ #define MSG_AUTO_HOME_X _UxGT("X jatorrira") #define MSG_AUTO_HOME_Y _UxGT("Y jatorrira") #define MSG_AUTO_HOME_Z _UxGT("Z jatorrira") -#define MSG_TMC_Z_CALIBRATION _UxGT("Kalibratu Z") #define MSG_LEVEL_BED_HOMING _UxGT("XYZ hasieraratzen") #define MSG_LEVEL_BED_WAITING _UxGT("Klik egin hasteko") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Hurrengo Puntua") diff --git a/Marlin/src/lcd/language/language_fi.h b/Marlin/src/lcd/language/language_fi.h index cca996d13..e749c96f2 100644 --- a/Marlin/src/lcd/language/language_fi.h +++ b/Marlin/src/lcd/language/language_fi.h @@ -39,7 +39,6 @@ #define MSG_AUTOSTART _UxGT("Automaatti") #define MSG_DISABLE_STEPPERS _UxGT("Vapauta moottorit") #define MSG_AUTO_HOME _UxGT("Aja referenssiin") -#define MSG_TMC_Z_CALIBRATION _UxGT("Kalibroi Z") #define MSG_LEVEL_BED_HOMING _UxGT("Homing XYZ") #define MSG_LEVEL_BED_WAITING _UxGT("Click to Begin") #define MSG_LEVEL_BED_DONE _UxGT("Leveling Done!") diff --git a/Marlin/src/lcd/language/language_fr.h b/Marlin/src/lcd/language/language_fr.h index 386f7cedf..8c08ff2e8 100644 --- a/Marlin/src/lcd/language/language_fr.h +++ b/Marlin/src/lcd/language/language_fr.h @@ -46,7 +46,6 @@ #define MSG_AUTO_HOME_X _UxGT("Origine X Auto.") #define MSG_AUTO_HOME_Y _UxGT("Origine Y Auto.") #define MSG_AUTO_HOME_Z _UxGT("Origine Z Auto.") -#define MSG_TMC_Z_CALIBRATION _UxGT("Calibrer Z") #define MSG_LEVEL_BED_HOMING _UxGT("Origine XYZ") #define MSG_LEVEL_BED_WAITING _UxGT("Clic pour commencer") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Point suivant") diff --git a/Marlin/src/lcd/language/language_gl.h b/Marlin/src/lcd/language/language_gl.h index 6809a2c70..ef1cb5500 100644 --- a/Marlin/src/lcd/language/language_gl.h +++ b/Marlin/src/lcd/language/language_gl.h @@ -43,7 +43,6 @@ #define MSG_AUTO_HOME_X _UxGT("Ir orixe X") #define MSG_AUTO_HOME_Y _UxGT("Ir orixe Y") #define MSG_AUTO_HOME_Z _UxGT("Ir orixe Z") -#define MSG_TMC_Z_CALIBRATION _UxGT("Calibrar Z") #define MSG_LEVEL_BED_HOMING _UxGT("Ir orixes XYZ") #define MSG_LEVEL_BED_WAITING _UxGT("Prema pulsador") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Seguinte punto") diff --git a/Marlin/src/lcd/language/language_hr.h b/Marlin/src/lcd/language/language_hr.h index 50893a0c8..e0576f915 100644 --- a/Marlin/src/lcd/language/language_hr.h +++ b/Marlin/src/lcd/language/language_hr.h @@ -43,7 +43,6 @@ #define MSG_AUTO_HOME_X _UxGT("Home-aj X") #define MSG_AUTO_HOME_Y _UxGT("Home-aj Y") #define MSG_AUTO_HOME_Z _UxGT("Home-aj Z") -#define MSG_TMC_Z_CALIBRATION _UxGT("Kalibriraj Z") #define MSG_LEVEL_BED_HOMING _UxGT("Home-aj XYZ") #define MSG_LEVEL_BED_WAITING _UxGT("Klikni za početak") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Sljedeća točka") diff --git a/Marlin/src/lcd/language/language_it.h b/Marlin/src/lcd/language/language_it.h index 06ec0f683..fa393875e 100644 --- a/Marlin/src/lcd/language/language_it.h +++ b/Marlin/src/lcd/language/language_it.h @@ -49,7 +49,6 @@ #define MSG_AUTO_HOME_Y _UxGT("Home asse Y") #define MSG_AUTO_HOME_Z _UxGT("Home asse Z") #define MSG_AUTO_Z_ALIGN _UxGT("Allineam.automat. Z") -#define MSG_TMC_Z_CALIBRATION _UxGT("Calibra Z") #define MSG_LEVEL_BED_HOMING _UxGT("Home assi XYZ") #define MSG_LEVEL_BED_WAITING _UxGT("Premi per iniziare") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Punto successivo") diff --git a/Marlin/src/lcd/language/language_jp-kana.h b/Marlin/src/lcd/language/language_jp-kana.h index b95285a85..93fbbeb11 100644 --- a/Marlin/src/lcd/language/language_jp-kana.h +++ b/Marlin/src/lcd/language/language_jp-kana.h @@ -50,7 +50,6 @@ #define MSG_AUTO_HOME_X _UxGT("Xジク ゲンテンフッキ") // "Home X" #define MSG_AUTO_HOME_Y _UxGT("Yジク ゲンテンフッキ") // "Home Y" #define MSG_AUTO_HOME_Z _UxGT("Zジク ゲンテンフッキ") // "Home Z" -#define MSG_TMC_Z_CALIBRATION _UxGT("Zジク コウセイ") #define MSG_LEVEL_BED_HOMING _UxGT("ゲンテンフッキチュウ") // "Homing XYZ" #define MSG_LEVEL_BED_WAITING _UxGT("レベリングカイシ") // "Click to Begin" #define MSG_LEVEL_BED_NEXT_POINT _UxGT("ツギノソクテイテンヘ") // "Next Point" diff --git a/Marlin/src/lcd/language/language_ko_KR.h b/Marlin/src/lcd/language/language_ko_KR.h index d6e9023b1..07630916b 100644 --- a/Marlin/src/lcd/language/language_ko_KR.h +++ b/Marlin/src/lcd/language/language_ko_KR.h @@ -48,7 +48,6 @@ #define MSG_AUTO_HOME_X _UxGT("X 홈으로") #define MSG_AUTO_HOME_Y _UxGT("Y 홈으로") #define MSG_AUTO_HOME_Z _UxGT("Z 홈으로") -#define MSG_TMC_Z_CALIBRATION _UxGT("Z 캘리브레이션") #define MSG_LEVEL_BED_HOMING _UxGT("XYZ 홈으로") #define MSG_LEVEL_BED_WAITING _UxGT("누르면 시작합니다") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("다음 Point") diff --git a/Marlin/src/lcd/language/language_nl.h b/Marlin/src/lcd/language/language_nl.h index 1ab6d0683..e8996e940 100644 --- a/Marlin/src/lcd/language/language_nl.h +++ b/Marlin/src/lcd/language/language_nl.h @@ -46,7 +46,6 @@ #define MSG_AUTO_HOME_X _UxGT("Home X") #define MSG_AUTO_HOME_Y _UxGT("Home Y") #define MSG_AUTO_HOME_Z _UxGT("Home Z") -#define MSG_TMC_Z_CALIBRATION _UxGT("Kalibreer Z") #define MSG_LEVEL_BED_HOMING _UxGT("Homing XYZ") #define MSG_LEVEL_BED_WAITING _UxGT("Klik voor begin") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Volgende Plaats") diff --git a/Marlin/src/lcd/language/language_pl.h b/Marlin/src/lcd/language/language_pl.h index 63cf3cd33..bb6e40a3b 100644 --- a/Marlin/src/lcd/language/language_pl.h +++ b/Marlin/src/lcd/language/language_pl.h @@ -40,7 +40,6 @@ #define MSG_AUTO_HOME_X _UxGT("Zeruj X") #define MSG_AUTO_HOME_Y _UxGT("Zeruj Y") #define MSG_AUTO_HOME_Z _UxGT("Zeruj Z") -#define MSG_TMC_Z_CALIBRATION _UxGT("Kalibruj Z") #define MSG_LEVEL_BED _UxGT("Poziom. stołu") #define MSG_LEVEL_BED_HOMING _UxGT("Pozycja zerowa") #define MSG_LEVEL_BED_WAITING _UxGT("Kliknij by rozp.") diff --git a/Marlin/src/lcd/language/language_pt-br.h b/Marlin/src/lcd/language/language_pt-br.h index 4e3839b66..33dffab88 100644 --- a/Marlin/src/lcd/language/language_pt-br.h +++ b/Marlin/src/lcd/language/language_pt-br.h @@ -54,7 +54,6 @@ #define MSG_AUTO_HOME_Y _UxGT("Ir na origem Y") #define MSG_AUTO_HOME_Z _UxGT("Ir na origem Z") #define MSG_AUTO_Z_ALIGN _UxGT("Auto alinhar Z") -#define MSG_TMC_Z_CALIBRATION _UxGT("Calibrar Z") #define MSG_LEVEL_BED_HOMING _UxGT("Indo para origem") #define MSG_LEVEL_BED_WAITING _UxGT("Clique para Iniciar") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Próximo Ponto") diff --git a/Marlin/src/lcd/language/language_pt.h b/Marlin/src/lcd/language/language_pt.h index 954e6eb45..6432b2f3a 100644 --- a/Marlin/src/lcd/language/language_pt.h +++ b/Marlin/src/lcd/language/language_pt.h @@ -43,7 +43,6 @@ #define MSG_AUTO_HOME_X _UxGT("Ir para origem X") #define MSG_AUTO_HOME_Y _UxGT("Ir para origem Y") #define MSG_AUTO_HOME_Z _UxGT("Ir para origem Z") -#define MSG_TMC_Z_CALIBRATION _UxGT("Calibrar Z") #define MSG_LEVEL_BED_HOMING _UxGT("Indo para origem") #define MSG_LEVEL_BED_WAITING _UxGT("Click para iniciar") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Próximo ponto") diff --git a/Marlin/src/lcd/language/language_ru.h b/Marlin/src/lcd/language/language_ru.h index 9a3761b0c..9fae761bf 100644 --- a/Marlin/src/lcd/language/language_ru.h +++ b/Marlin/src/lcd/language/language_ru.h @@ -47,7 +47,6 @@ #define MSG_AUTO_HOME_X _UxGT("Парковка X") #define MSG_AUTO_HOME_Y _UxGT("Парковка Y") #define MSG_AUTO_HOME_Z _UxGT("Парковка Z") -#define MSG_TMC_Z_CALIBRATION _UxGT("Калибровать Z") #define MSG_LEVEL_BED_HOMING _UxGT("Нулевое положение") #define MSG_LEVEL_BED_WAITING _UxGT("Нажмите чтобы начать") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Следующая точка") diff --git a/Marlin/src/lcd/language/language_sk.h b/Marlin/src/lcd/language/language_sk.h index a30eec9bf..8feaee442 100644 --- a/Marlin/src/lcd/language/language_sk.h +++ b/Marlin/src/lcd/language/language_sk.h @@ -57,7 +57,6 @@ #define MSG_AUTO_HOME_Y _UxGT("Domov os Y") #define MSG_AUTO_HOME_Z _UxGT("Domov os Z") #define MSG_AUTO_Z_ALIGN _UxGT("Auto-zarovn. Z") -#define MSG_TMC_Z_CALIBRATION _UxGT("Kalibrovať Z") #define MSG_LEVEL_BED_HOMING _UxGT("Parkovanie XYZ") #define MSG_LEVEL_BED_WAITING _UxGT("Kliknutím spusťte") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Ďalší bod") diff --git a/Marlin/src/lcd/language/language_tr.h b/Marlin/src/lcd/language/language_tr.h index 16e6da2dc..47710c27f 100644 --- a/Marlin/src/lcd/language/language_tr.h +++ b/Marlin/src/lcd/language/language_tr.h @@ -55,7 +55,6 @@ #define MSG_AUTO_HOME_Y _UxGT("Y Sıfırla") #define MSG_AUTO_HOME_Z _UxGT("Z Sıfırla") #define MSG_AUTO_Z_ALIGN _UxGT("Oto. Z-Hizalama") -#define MSG_TMC_Z_CALIBRATION _UxGT("Z Ayarla") #define MSG_LEVEL_BED_HOMING _UxGT("XYZ Sıfırlanıyor") #define MSG_LEVEL_BED_WAITING _UxGT("Başlatmak için tıkla") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Sonraki Nokta") diff --git a/Marlin/src/lcd/language/language_uk.h b/Marlin/src/lcd/language/language_uk.h index 38d764242..352bd1346 100644 --- a/Marlin/src/lcd/language/language_uk.h +++ b/Marlin/src/lcd/language/language_uk.h @@ -43,7 +43,6 @@ #define MSG_AUTO_HOME_X _UxGT("Паркування X") #define MSG_AUTO_HOME_Y _UxGT("Паркування Y") #define MSG_AUTO_HOME_Z _UxGT("Паркування Z") -#define MSG_TMC_Z_CALIBRATION _UxGT("Калібрування Z") #define MSG_LEVEL_BED_HOMING _UxGT("Паркування XYZ") #define MSG_LEVEL_BED_WAITING _UxGT("Почати") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Слідуюча Точка") diff --git a/Marlin/src/lcd/language/language_zh_CN.h b/Marlin/src/lcd/language/language_zh_CN.h index 7eb9fa008..df05aeb16 100644 --- a/Marlin/src/lcd/language/language_zh_CN.h +++ b/Marlin/src/lcd/language/language_zh_CN.h @@ -45,7 +45,6 @@ #define MSG_AUTO_HOME_X _UxGT("回X原位") //"Home X" #define MSG_AUTO_HOME_Y _UxGT("回Y原位") //"Home Y" #define MSG_AUTO_HOME_Z _UxGT("回Z原位") //"Home Z" -#define MSG_TMC_Z_CALIBRATION _UxGT("⊿校准Z") #define MSG_LEVEL_BED_HOMING _UxGT("平台调平XYZ归原位") //"Homing XYZ" #define MSG_LEVEL_BED_WAITING _UxGT("单击开始热床调平") //"Click to Begin" #define MSG_LEVEL_BED_NEXT_POINT _UxGT("下个热床调平点") //"Next Point" diff --git a/Marlin/src/lcd/language/language_zh_TW.h b/Marlin/src/lcd/language/language_zh_TW.h index d823ad4d6..17634448b 100644 --- a/Marlin/src/lcd/language/language_zh_TW.h +++ b/Marlin/src/lcd/language/language_zh_TW.h @@ -45,7 +45,6 @@ #define MSG_AUTO_HOME_X _UxGT("回X原點") //"Home X" #define MSG_AUTO_HOME_Y _UxGT("回Y原點") //"Home Y" #define MSG_AUTO_HOME_Z _UxGT("回Z原點") //"Home Z" -#define MSG_TMC_Z_CALIBRATION _UxGT("⊿校準Z") #define MSG_LEVEL_BED_HOMING _UxGT("平台調平XYZ歸原點") //"Homing XYZ" #define MSG_LEVEL_BED_WAITING _UxGT("單擊開始熱床調平") //"Click to Begin" #define MSG_LEVEL_BED_NEXT_POINT _UxGT("下個熱床調平點") //"Next Point" diff --git a/Marlin/src/lcd/menu/menu_motion.cpp b/Marlin/src/lcd/menu/menu_motion.cpp index e4c29ad18..a47f7d117 100644 --- a/Marlin/src/lcd/menu/menu_motion.cpp +++ b/Marlin/src/lcd/menu/menu_motion.cpp @@ -452,13 +452,6 @@ void menu_motion() { MENU_ITEM(gcode, MSG_AUTO_Z_ALIGN, PSTR("G34")); #endif - // - // TMC Z Calibration - // - #if ENABLED(TMC_Z_CALIBRATION) - MENU_ITEM(gcode, MSG_TMC_Z_CALIBRATION, PSTR("G28\nM915")); - #endif - // // Level Bed //