Merge pull request #5387 from thinkyhead/rc_polish_update
Polish language update – plus placeholders
This commit is contained in:
Scott Lahteine
GitHub
commit
1aca2dfe0c
@ -39,7 +39,10 @@
|
||||
#define MSG_MAIN "Menu glowne"
|
||||
#define MSG_AUTOSTART "Autostart"
|
||||
#define MSG_DISABLE_STEPPERS "Wylacz silniki"
|
||||
#define MSG_AUTO_HOME "Auto. poz. zerowa"
|
||||
#define MSG_AUTO_HOME "Pozycja zerowa"
|
||||
#define MSG_AUTO_HOME_X "Home X"
|
||||
#define MSG_AUTO_HOME_Y "Home Y"
|
||||
#define MSG_AUTO_HOME_Z "Home Z"
|
||||
#define MSG_LEVEL_BED_HOMING "Pozycja zerowa"
|
||||
#define MSG_LEVEL_BED_WAITING "Kliknij by rozp."
|
||||
#define MSG_LEVEL_BED_NEXT_POINT "Nastepny punkt"
|
||||
@ -49,14 +52,14 @@
|
||||
#define MSG_HOME_OFFSETS_APPLIED "Poz. zerowa ust."
|
||||
#define MSG_SET_ORIGIN "Ustaw punkt zero"
|
||||
#define MSG_PREHEAT_1 "Rozgrzej PLA"
|
||||
#define MSG_PREHEAT_1_N "Rozgrzej PLA "
|
||||
#define MSG_PREHEAT_1_ALL "Roz. PLA Wszystko"
|
||||
#define MSG_PREHEAT_1_BEDONLY "Rozgrzej PLA Loze"
|
||||
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 " "
|
||||
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 " All"
|
||||
#define MSG_PREHEAT_1_BEDONLY "Rozgrzej stol PLA"
|
||||
#define MSG_PREHEAT_1_SETTINGS "Ustaw. rozg. PLA"
|
||||
#define MSG_PREHEAT_2 "Rozgrzej ABS"
|
||||
#define MSG_PREHEAT_2_N "Rozgrzej ABS "
|
||||
#define MSG_PREHEAT_2_ALL "Roz. ABS Wszystko"
|
||||
#define MSG_PREHEAT_2_BEDONLY "Rozgrzej ABS Loze"
|
||||
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 " "
|
||||
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 " All"
|
||||
#define MSG_PREHEAT_2_BEDONLY "Rozgrzej stol ABS"
|
||||
#define MSG_PREHEAT_2_SETTINGS "Ustaw. rozg. ABS"
|
||||
#define MSG_COOLDOWN "Chlodzenie"
|
||||
#define MSG_SWITCH_PS_ON "Wlacz zasilacz"
|
||||
@ -64,18 +67,18 @@
|
||||
#define MSG_EXTRUDE "Ekstruzja"
|
||||
#define MSG_RETRACT "Wycofanie"
|
||||
#define MSG_MOVE_AXIS "Ruch osi"
|
||||
#define MSG_LEVEL_BED "Poziom. loza"
|
||||
#define MSG_LEVEL_BED "Poziom. stolu"
|
||||
#define MSG_MOVE_X "Przesun w X"
|
||||
#define MSG_MOVE_Y "Przesun w Y"
|
||||
#define MSG_MOVE_Z "Przesun w Z"
|
||||
#define MSG_MOVE_E "Ekstruzja (os E)"
|
||||
#define MSG_MOVE_01MM "Przesuwaj co .1mm"
|
||||
#define MSG_MOVE_1MM "Przesuwaj co 1mm"
|
||||
#define MSG_MOVE_10MM "Przesuwaj co 10mm"
|
||||
#define MSG_MOVE_01MM "Przesun co .1mm"
|
||||
#define MSG_MOVE_1MM "Przesun co 1mm"
|
||||
#define MSG_MOVE_10MM "Przesun co 10mm"
|
||||
#define MSG_SPEED "Predkosc"
|
||||
#define MSG_BED_Z "Loze Z"
|
||||
#define MSG_BED_Z "Stol Z"
|
||||
#define MSG_NOZZLE "Dysza"
|
||||
#define MSG_BED "Loze"
|
||||
#define MSG_BED "Stol"
|
||||
#define MSG_FAN_SPEED "Obroty wiatraka"
|
||||
#define MSG_FLOW "Przeplyw"
|
||||
#define MSG_CONTROL "Ustawienia"
|
||||
@ -89,6 +92,7 @@
|
||||
#define MSG_PID_I "PID-I"
|
||||
#define MSG_PID_D "PID-D"
|
||||
#define MSG_PID_C "PID-C"
|
||||
#define MSG_SELECT "Select"
|
||||
#define MSG_ACC "Przyspieszenie"
|
||||
#define MSG_VX_JERK "Zryw Vx"
|
||||
#define MSG_VY_JERK "Zryw Vy"
|
||||
@ -140,7 +144,9 @@
|
||||
#define MSG_FILAMENTCHANGE "Zmien filament"
|
||||
#define MSG_INIT_SDCARD "Inicjal. karty SD"
|
||||
#define MSG_CNG_SDCARD "Zmiana karty SD"
|
||||
#define MSG_ZPROBE_OUT "Sonda Z za lozem"
|
||||
#define MSG_ZPROBE_OUT "Sonda Z za stolem"
|
||||
#define MSG_BLTOUCH_SELFTEST "BLTouch Self-Test"
|
||||
#define MSG_BLTOUCH_RESET "Reset BLTouch"
|
||||
#define MSG_HOME "Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
|
||||
#define MSG_FIRST "first"
|
||||
#define MSG_ZPROBE_ZOFFSET "Offset Z"
|
||||
@ -149,20 +155,90 @@
|
||||
#define MSG_BABYSTEP_Z "Babystep Z"
|
||||
#define MSG_ENDSTOP_ABORT "Blad krancowki"
|
||||
#define MSG_HEATING_FAILED_LCD "Rozgrz. nieudane"
|
||||
#define MSG_ERR_REDUNDANT_TEMP "Błąd temperatury"
|
||||
#define MSG_ERR_REDUNDANT_TEMP "Blad temperatury"
|
||||
#define MSG_THERMAL_RUNAWAY "Zanik temp."
|
||||
#define MSG_ERR_MAXTEMP "Err: max. temp."
|
||||
#define MSG_ERR_MINTEMP "Err: min. temp."
|
||||
#define MSG_ERR_MAXTEMP_BED "Err: max. temp. loza"
|
||||
#define MSG_ERR_MINTEMP_BED "Err: min. temp. loza"
|
||||
#define MSG_ERR_Z_HOMING "G28 Z Forbidden"
|
||||
#define MSG_HALTED "PRINTER HALTED"
|
||||
#define MSG_PLEASE_RESET "Please reset"
|
||||
#define MSG_SHORT_DAY "d" // One character only
|
||||
#define MSG_SHORT_HOUR "h" // One character only
|
||||
#define MSG_SHORT_MINUTE "m" // One character only
|
||||
#define MSG_HEATING "Rozgrzewanie..."
|
||||
#define MSG_HEATING_COMPLETE "Rozgrzano"
|
||||
#define MSG_BED_HEATING "Rozgrzewanie loza..."
|
||||
#define MSG_BED_DONE "Rozgrzano loze"
|
||||
#define MSG_BED_HEATING "Rozgrzewanie stolu..."
|
||||
#define MSG_BED_DONE "Rozgrzano stol"
|
||||
#define MSG_DELTA_CALIBRATE "Kalibrowanie Delty"
|
||||
#define MSG_DELTA_CALIBRATE_X "Kalibruj X"
|
||||
#define MSG_DELTA_CALIBRATE_Y "Kalibruj Y"
|
||||
#define MSG_DELTA_CALIBRATE_Z "Kalibruj Z"
|
||||
#define MSG_DELTA_CALIBRATE_CENTER "Kalibruj środek"
|
||||
|
||||
#define MSG_INFO_MENU "About Printer"
|
||||
#define MSG_INFO_PRINTER_MENU "Printer Info"
|
||||
#define MSG_INFO_STATS_MENU "Printer Stats"
|
||||
#define MSG_INFO_BOARD_MENU "Board Info"
|
||||
#define MSG_INFO_THERMISTOR_MENU "Thermistors"
|
||||
#define MSG_INFO_EXTRUDERS "Extruders"
|
||||
#define MSG_INFO_BAUDRATE "Baud"
|
||||
#define MSG_INFO_PROTOCOL "Protocol"
|
||||
#define MSG_LIGHTS_ON "Case light on"
|
||||
#define MSG_LIGHTS_OFF "Case light off"
|
||||
|
||||
#if LCD_WIDTH >= 20
|
||||
#define MSG_INFO_PRINT_COUNT "Print Count"
|
||||
#define MSG_INFO_COMPLETED_PRINTS "Completed"
|
||||
#define MSG_INFO_PRINT_TIME "Total print time"
|
||||
#define MSG_INFO_PRINT_LONGEST "Longest job time"
|
||||
#define MSG_INFO_PRINT_FILAMENT "Extruded total"
|
||||
#else
|
||||
#define MSG_INFO_PRINT_COUNT "Prints"
|
||||
#define MSG_INFO_COMPLETED_PRINTS "Completed"
|
||||
#define MSG_INFO_PRINT_TIME "Total"
|
||||
#define MSG_INFO_PRINT_LONGEST "Longest"
|
||||
#define MSG_INFO_PRINT_FILAMENT "Extruded"
|
||||
#endif
|
||||
|
||||
#define MSG_INFO_MIN_TEMP "Min Temp"
|
||||
#define MSG_INFO_MAX_TEMP "Max Temp"
|
||||
#define MSG_INFO_PSU "Power Supply"
|
||||
|
||||
#define MSG_DRIVE_STRENGTH "Drive Strength"
|
||||
#define MSG_DAC_PERCENT "Driver %"
|
||||
#define MSG_DAC_EEPROM_WRITE "DAC EEPROM Write"
|
||||
#define MSG_FILAMENT_CHANGE_HEADER "CHANGE FILAMENT"
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_HEADER "CHANGE OPTIONS:"
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "Extrude more"
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME "Resume print"
|
||||
#if LCD_HEIGHT >= 4
|
||||
#define MSG_FILAMENT_CHANGE_INIT_1 "Wait for start"
|
||||
#define MSG_FILAMENT_CHANGE_INIT_2 "of the filament"
|
||||
#define MSG_FILAMENT_CHANGE_INIT_3 "change"
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Wait for"
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_2 "filament unload"
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_3 ""
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_1 "Insert filament"
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_2 "and press button"
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_3 "to continue..."
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 "Wait for"
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_2 "filament load"
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_3 ""
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Wait for"
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 "filament extrude"
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 ""
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 "Wait for print"
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_2 "to resume"
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_3 ""
|
||||
#else // LCD_HEIGHT < 4
|
||||
#define MSG_FILAMENT_CHANGE_INIT_1 "Please wait..."
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Ejecting..."
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_1 "Insert and Click"
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 "Loading..."
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Extruding..."
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 "Resuming..."
|
||||
#endif // LCD_HEIGHT < 4
|
||||
|
||||
#endif // LANGUAGE_PL_H
|
||||
|
||||
Loading…
Reference in New Issue
Block a user