diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 0beb3ef4e..d06f2cc53 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index 0beb3ef4e..d06f2cc53 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index 1c64ffea5..b39403b64 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index 672bab0cc..778331661 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index ca6f419d4..d304a0cc6 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h index 9a3b1d744..4363b13a7 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h +++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index 4c5400909..d908190de 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -727,8 +727,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index a20eaaa7f..7daa951f4 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index 7a0009b98..ef75f141d 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index cf6407890..a4219dde1 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index cf6407890..a4219dde1 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index c009726f2..adf542373 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index 7b75ae1d9..19a638f21 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index 8da311ef8..8e55b2290 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Anet/E16/Configuration_adv.h b/config/examples/Anet/E16/Configuration_adv.h index 698aa63f0..ec4f3bcc1 100644 --- a/config/examples/Anet/E16/Configuration_adv.h +++ b/config/examples/Anet/E16/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index 60ef2b988..b7209024d 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index 1b284f0d3..938dee2c9 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -730,8 +730,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 17662bbf5..3743e6e8a 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index 3e3be7f56..af8b336a6 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index 0e49f27e8..639dec620 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index cdf0ef941..824c6059b 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index 0e49f27e8..639dec620 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index 34edea512..ac6b30224 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Creality/CR-10/Configuration_adv.h b/config/examples/Creality/CR-10/Configuration_adv.h index f1a347db1..a33448de2 100644 --- a/config/examples/Creality/CR-10/Configuration_adv.h +++ b/config/examples/Creality/CR-10/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Creality/CR-10S/Configuration_adv.h b/config/examples/Creality/CR-10S/Configuration_adv.h index e033545e7..1f3fffd9a 100644 --- a/config/examples/Creality/CR-10S/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Creality/CR-10_5S/Configuration_adv.h b/config/examples/Creality/CR-10_5S/Configuration_adv.h index f45dc5b33..063103689 100644 --- a/config/examples/Creality/CR-10_5S/Configuration_adv.h +++ b/config/examples/Creality/CR-10_5S/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Creality/CR-10mini/Configuration_adv.h b/config/examples/Creality/CR-10mini/Configuration_adv.h index 38c355d51..80ce0971c 100644 --- a/config/examples/Creality/CR-10mini/Configuration_adv.h +++ b/config/examples/Creality/CR-10mini/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index 6876f0b57..40c008dfb 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h index 52cf88618..0ded478ad 100644 --- a/config/examples/Creality/CR-20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index 052f0c8f2..c0786a08c 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index bb9a49696..0e0328dc0 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Creality/Ender-3/Configuration_adv.h b/config/examples/Creality/Ender-3/Configuration_adv.h index 56d361568..0fdaf6637 100644 --- a/config/examples/Creality/Ender-3/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index f69c73f7f..807b20803 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Creality/Ender-5/Configuration_adv.h b/config/examples/Creality/Ender-5/Configuration_adv.h index 6788703c1..fde1f25cc 100644 --- a/config/examples/Creality/Ender-5/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index 0d4cf77dd..760e1f142 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h index 5d5d623bf..ac355e2cb 100755 --- a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h +++ b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index 3c91537cb..878b43b44 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index 14f2b0f01..b6f39c760 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h index c974cc3b5..12c5ed118 100644 --- a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h b/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h index c974cc3b5..12c5ed118 100644 --- a/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h b/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h index c974cc3b5..12c5ed118 100644 --- a/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/FYSETC/Cheetah/base/Configuration_adv.h b/config/examples/FYSETC/Cheetah/base/Configuration_adv.h index c974cc3b5..12c5ed118 100644 --- a/config/examples/FYSETC/Cheetah/base/Configuration_adv.h +++ b/config/examples/FYSETC/Cheetah/base/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index 35134d5a7..9966b87bf 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Felix/Configuration_adv.h b/config/examples/Felix/Configuration_adv.h index c59c29407..614d605eb 100644 --- a/config/examples/Felix/Configuration_adv.h +++ b/config/examples/Felix/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index 67a557cdd..6b2cdd116 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index 508f34505..5effd2008 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index 3625e2a78..f56014e66 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index 60aba4326..e2aefb530 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -730,8 +730,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index a39b36ce9..8a022c3cc 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -730,8 +730,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index 8a0a3e3b7..7eeec42a7 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h index a371b110a..b0f08ee6a 100644 --- a/config/examples/Geeetech/A10M/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index d0361f0c5..352abf998 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index 1c5bae71d..11debe093 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index 8a0a3e3b7..7eeec42a7 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index 8a0a3e3b7..7eeec42a7 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index 2afa4fd71..5bec81b1e 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -718,8 +718,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index 82310c770..50e285152 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index c9213cbf0..c09d35acc 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -731,8 +731,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index c18c3ab72..afd04fc8c 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index c9213cbf0..c09d35acc 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -731,8 +731,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index 21bc2c665..d28b65587 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index a012f5946..6c8854b1d 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index f4b110bfc..2346d9b0b 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index 287c827b5..a23d8cfda 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h index d6bd8aac5..493dc21ef 100644 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ b/config/examples/Mks/Robin/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index 3f795cb07..bc1cfb38f 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index 11a91529f..bb9d2c421 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index 2d645457b..13d112d9c 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/SCARA/Configuration_adv.h b/config/examples/SCARA/Configuration_adv.h index 95509ab76..555b4f940 100644 --- a/config/examples/SCARA/Configuration_adv.h +++ b/config/examples/SCARA/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index 14f142e65..aff364398 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h index cadb58055..c96c9287b 100644 --- a/config/examples/Sanguinololu/Configuration_adv.h +++ b/config/examples/Sanguinololu/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index bd76b9957..9de7fa2be 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h index fd72823bc..59d171a58 100755 --- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h @@ -722,8 +722,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index 1f69b3a01..d860f4491 100755 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h index 1f69b3a01..d860f4491 100755 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h index f37061fa6..7271f212a 100644 --- a/config/examples/TheBorg/Configuration_adv.h +++ b/config/examples/TheBorg/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index e405d0db7..7df8e8728 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index f97df9423..418e267e2 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h index b97e94ae8..a4990e913 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index 354748734..3a3784145 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index c59605fb8..84ccae24b 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index cd0f68acf..07fc188f6 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index c0c746e12..bc9f4886c 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -739,8 +739,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Velleman/K8400/Configuration_adv.h b/config/examples/Velleman/K8400/Configuration_adv.h index 9820b7dab..5d4c64ab2 100644 --- a/config/examples/Velleman/K8400/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index 051c3fd7b..2b32e9f16 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index 59748b34f..5bfe7b8b8 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index 27ab37cb1..1691f9e97 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index faf56b6eb..3a99c5ce9 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -727,8 +727,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index a7d512dae..61bc4d581 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -727,8 +727,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index a7d512dae..61bc4d581 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -727,8 +727,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index 7d089829d..bb264a8a9 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -727,8 +727,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 7d089829d..bb264a8a9 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -727,8 +727,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index 20423cd99..3c6dbf809 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -727,8 +727,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index 2c461a62e..0b4f164c1 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -727,8 +727,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index a52ec2cb1..88e06eb1d 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -727,8 +727,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index 17c94c06c..4d8b50391 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -727,8 +727,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index 20423cd99..3c6dbf809 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -727,8 +727,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h index 20423cd99..3c6dbf809 100644 --- a/config/examples/delta/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/kossel_mini/Configuration_adv.h @@ -727,8 +727,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index f74602336..cad45802d 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -727,8 +727,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index dc7a8af38..85cf6c523 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index f3941d65b..3737d8c93 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index c38546fd7..c59351655 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/wt150/Configuration_adv.h b/config/examples/wt150/Configuration_adv.h index d2d8e9575..d38f743c3 100644 --- a/config/examples/wt150/Configuration_adv.h +++ b/config/examples/wt150/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable.