ADIMLab Granty v1 / v2 (#15017)
* # This is a combination of 18 commits. # This is the 1st commit message: Add Support for ADIMLab Granty # The commit message #2 will be skipped: # Update Configuration.h # The commit message #3 will be skipped: # Add files via upload # # Add Support for ADIMLab Granty # The commit message #4 will be skipped: # Create Configuration.h # The commit message #5 will be skipped: # Delete Configuration.h # The commit message #6 will be skipped: # Create Test.h # The commit message #7 will be skipped: # Add files via upload # The commit message #8 will be skipped: # Delete Test.h # The commit message #9 will be skipped: # Delete Configuration.h # The commit message #10 will be skipped: # Delete Configuration_adv.h # The commit message #11 will be skipped: # Add files via upload # # Add ADIMLab Pins # The commit message #12 will be skipped: # Add files via upload # # Add Bootscreen # The commit message #13 will be skipped: # Update Configuration.h # # Add Bootscreen # The commit message #14 will be skipped: # Update pins.h # # Add ADIMLab Board # The commit message #15 will be skipped: # Update boards.h # # Add ADIMLab Granty # The commit message #16 will be skipped: # Update Makefile # # Add ADIMLab Granty # The commit message #17 will be skipped: # Update boards.h # The commit message #18 will be skipped: # Update Makefile * Add Support for ADIMLab Granty * Optimize bootscreen * Update Makefile Updated Description * Update boards.h Updated Description * Update pins_HJC2560C_REV2.h Updated Description * Update Configuration.h Added Author + Custom_Machine_Name * Create _Bootscreen.h Add Bootscreen * Add files via upload Add ADIMLab Granty v1 * Update boards.h Add ADIMLab Granty v1 * Update Makefile Add ADIMLab Granty v1 * Update pins_HJC2560C_REV2.h * Consolidate Granty configs * config updates
This commit is contained in:
Scott Lahteine
GitHub
commit
20fc66f875
@ -251,8 +251,10 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1141)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1142)
|
||||
# Overlord/Overlord Pro
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1143)
|
||||
# ADIMLab Granty
|
||||
# ADIMLab Granty v1
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1144)
|
||||
# ADIMLab Granty v2
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1145)
|
||||
|
||||
#
|
||||
# RAMBo and derivatives
|
||||
|
||||
@ -95,7 +95,8 @@
|
||||
#define BOARD_Z_BOLT_X_SERIES 1141 // Z-Bolt X Series
|
||||
#define BOARD_TT_OSCAR 1142 // TT OSCAR
|
||||
#define BOARD_OVERLORD 1143 // Overlord/Overlord Pro
|
||||
#define BOARD_HJC2560C_REV2 1144 // ADIMLab Granty
|
||||
#define BOARD_HJC2560C_REV1 1144 // ADIMLab Granty v1
|
||||
#define BOARD_HJC2560C_REV2 1145 // ADIMLab Granty v2
|
||||
|
||||
//
|
||||
// RAMBo and derivatives
|
||||
|
||||
@ -29,7 +29,7 @@
|
||||
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
|
||||
#endif
|
||||
|
||||
#define DEFAULT_MACHINE_NAME "HCMaker7"
|
||||
#define DEFAULT_MACHINE_NAME "ADIMLab Granty v2"
|
||||
#define BOARD_INFO_NAME "HJC2560-C"
|
||||
|
||||
//
|
||||
|
||||
2219
config/examples/ADIMLab/Granty v1/Configuration.h
Normal file
2219
config/examples/ADIMLab/Granty v1/Configuration.h
Normal file
File diff suppressed because it is too large
Load Diff
2643
config/examples/ADIMLab/Granty v1/Configuration_adv.h
Normal file
2643
config/examples/ADIMLab/Granty v1/Configuration_adv.h
Normal file
File diff suppressed because it is too large
Load Diff
@ -73,7 +73,7 @@
|
||||
// User-specified version info of this build to display in [Pronterface, etc] terminal window during
|
||||
// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
|
||||
// build by the user have been successfully uploaded into firmware.
|
||||
#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
|
||||
#define STRING_CONFIG_H_AUTHOR "(ETE-Design, Granty v2)" // Who made the changes.
|
||||
#define SHOW_BOOTSCREEN
|
||||
#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1
|
||||
#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2
|
||||
@ -135,7 +135,7 @@
|
||||
#endif
|
||||
|
||||
// Name displayed in the LCD "Ready" message and Info menu
|
||||
//#define CUSTOM_MACHINE_NAME "3D Printer"
|
||||
#define CUSTOM_MACHINE_NAME "ADIMLab Granty v2"
|
||||
|
||||
// Printer's unique ID, used by some programs to differentiate between machines.
|
||||
// Choose your own or use a service like http://www.uuidgenerator.net/version4
|
||||
@ -359,6 +359,7 @@
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
@ -402,7 +403,7 @@
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
* :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
|
||||
* :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
@ -2034,6 +2035,12 @@
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
|
||||
// See Configuration_adv.h for all configuration options.
|
||||
//
|
||||
//#define LULZBOT_TOUCH_UI
|
||||
|
||||
//
|
||||
// Third-party or vendor-customized controller interfaces.
|
||||
// Sources should be installed in 'src/lcd/extensible_ui'.
|
||||
@ -279,9 +279,10 @@
|
||||
*/
|
||||
//#define USE_CONTROLLER_FAN
|
||||
#if ENABLED(USE_CONTROLLER_FAN)
|
||||
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
|
||||
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
|
||||
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
|
||||
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
|
||||
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
|
||||
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
|
||||
//#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled
|
||||
#endif
|
||||
|
||||
// When first starting the main fan, run it at full speed for the
|
||||
@ -657,10 +658,10 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
// @section motion
|
||||
|
||||
// minimum time in microseconds that a movement needs to take if the buffer is emptied.
|
||||
#define DEFAULT_MINSEGMENTTIME 20000
|
||||
// Minimum time that a segment needs to take if the buffer is emptied
|
||||
#define DEFAULT_MINSEGMENTTIME 20000 // (ms)
|
||||
|
||||
// If defined the movements slow down when the look ahead buffer is only half full
|
||||
#define SLOWDOWN
|
||||
@ -850,11 +851,35 @@
|
||||
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
|
||||
#endif
|
||||
|
||||
// Include a page of printer information in the LCD Main Menu
|
||||
//#define LCD_INFO_MENU
|
||||
#if ENABLED(LCD_INFO_MENU)
|
||||
//#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
|
||||
#endif
|
||||
#if HAS_LCD_MENU
|
||||
|
||||
// Include a page of printer information in the LCD Main Menu
|
||||
//#define LCD_INFO_MENU
|
||||
#if ENABLED(LCD_INFO_MENU)
|
||||
//#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
|
||||
#endif
|
||||
|
||||
// BACK menu items keep the highlight at the top
|
||||
//#define TURBO_BACK_MENU_ITEM
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Add LED Control to the LCD menu
|
||||
*/
|
||||
//#define LED_CONTROL_MENU
|
||||
#if ENABLED(LED_CONTROL_MENU)
|
||||
#define LED_COLOR_PRESETS // Enable the Preset Color menu option
|
||||
#if ENABLED(LED_COLOR_PRESETS)
|
||||
#define LED_USER_PRESET_RED 255 // User defined RED value
|
||||
#define LED_USER_PRESET_GREEN 128 // User defined GREEN value
|
||||
#define LED_USER_PRESET_BLUE 0 // User defined BLUE value
|
||||
#define LED_USER_PRESET_WHITE 255 // User defined WHITE value
|
||||
#define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
|
||||
//#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // HAS_LCD_MENU
|
||||
|
||||
// Scroll a longer status message into view
|
||||
//#define STATUS_MESSAGE_SCROLLING
|
||||
@ -879,23 +904,6 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
*/
|
||||
//#define LED_CONTROL_MENU
|
||||
#if ENABLED(LED_CONTROL_MENU)
|
||||
#define LED_COLOR_PRESETS // Enable the Preset Color menu option
|
||||
#if ENABLED(LED_COLOR_PRESETS)
|
||||
#define LED_USER_PRESET_RED 255 // User defined RED value
|
||||
#define LED_USER_PRESET_GREEN 128 // User defined GREEN value
|
||||
#define LED_USER_PRESET_BLUE 0 // User defined BLUE value
|
||||
#define LED_USER_PRESET_WHITE 255 // User defined WHITE value
|
||||
#define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
|
||||
//#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
|
||||
#endif
|
||||
#endif // LED_CONTROL_MENU
|
||||
|
||||
#if ENABLED(SDSUPPORT)
|
||||
|
||||
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
|
||||
@ -930,6 +938,7 @@
|
||||
#if ENABLED(POWER_LOSS_RECOVERY)
|
||||
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
|
||||
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
|
||||
//#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate
|
||||
//#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume
|
||||
//#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
|
||||
|
||||
@ -1134,6 +1143,7 @@
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
//#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
|
||||
//#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~3260 (or ~940) bytes of PROGMEM.
|
||||
|
||||
// Frivolous Game Options
|
||||
//#define MARLIN_BRICKOUT
|
||||
@ -1143,6 +1153,53 @@
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
//
|
||||
// Lulzbot Touch UI
|
||||
//
|
||||
#if ENABLED(LULZBOT_TOUCH_UI)
|
||||
// Display board used
|
||||
//#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
|
||||
//#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
|
||||
//#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
|
||||
//#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
|
||||
//#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
|
||||
|
||||
// Correct the resolution if not using the stock TFT panel.
|
||||
//#define TOUCH_UI_320x240
|
||||
//#define TOUCH_UI_480x272
|
||||
//#define TOUCH_UI_800x480
|
||||
|
||||
// Mappings for boards with a standard RepRapDiscount Display connector
|
||||
//#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
|
||||
//#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
|
||||
//#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
|
||||
//#define OTHER_PIN_LAYOUT // Define pins manually below
|
||||
#if ENABLED(OTHER_PIN_LAYOUT)
|
||||
// The pins for CS and MOD_RESET (PD) must be chosen.
|
||||
#define CLCD_MOD_RESET 9
|
||||
#define CLCD_SPI_CS 10
|
||||
|
||||
// If using software SPI, specify pins for SCLK, MOSI, MISO
|
||||
//#define CLCD_USE_SOFT_SPI
|
||||
#if ENABLED(CLCD_USE_SOFT_SPI)
|
||||
#define CLCD_SOFT_SPI_MOSI 11
|
||||
#define CLCD_SOFT_SPI_MISO 12
|
||||
#define CLCD_SOFT_SPI_SCLK 13
|
||||
#endif
|
||||
#endif
|
||||
|
||||
// Display Orientation. An inverted (i.e. upside-down) display
|
||||
// is supported on the FT800. The FT810 and beyond also support
|
||||
// portrait and mirrored orientations.
|
||||
//#define TOUCH_UI_INVERTED
|
||||
//#define TOUCH_UI_PORTRAIT
|
||||
//#define TOUCH_UI_MIRRORED
|
||||
|
||||
// Use a numeric passcode for "Screen lock" keypad.
|
||||
// (recommended for smaller displays)
|
||||
//#define TOUCH_UI_PASSCODE
|
||||
#endif
|
||||
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
@ -2242,6 +2299,13 @@
|
||||
*/
|
||||
#define EXTENDED_CAPABILITIES_REPORT
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
* M16 with a non-matching string causes the printer to halt.
|
||||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
@ -2296,6 +2360,13 @@
|
||||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
*
|
||||
Loading…
Reference in New Issue
Block a user