New Dutch terms
This commit is contained in:
Scott Lahteine
parent
8383f35b40
commit
21ed43df5f
@ -35,12 +35,17 @@
|
|||||||
#define WELCOME_MSG MACHINE_NAME " gereed."
|
#define WELCOME_MSG MACHINE_NAME " gereed."
|
||||||
#define MSG_SD_INSERTED "Kaart ingestoken"
|
#define MSG_SD_INSERTED "Kaart ingestoken"
|
||||||
#define MSG_SD_REMOVED "Kaart verwijderd"
|
#define MSG_SD_REMOVED "Kaart verwijderd"
|
||||||
|
#define MSG_LCD_ENDSTOPS "Endstops" // Max length 8 characters
|
||||||
#define MSG_MAIN "Hoofdmenu"
|
#define MSG_MAIN "Hoofdmenu"
|
||||||
#define MSG_AUTOSTART "Autostart"
|
#define MSG_AUTOSTART "Autostart"
|
||||||
#define MSG_DISABLE_STEPPERS "Motoren uit"
|
#define MSG_DISABLE_STEPPERS "Motoren uit"
|
||||||
#define MSG_AUTO_HOME "Auto home"
|
#define MSG_AUTO_HOME "Auto home"
|
||||||
|
#define MSG_AUTO_HOME_X "Home X"
|
||||||
|
#define MSG_AUTO_HOME_Y "Home Y"
|
||||||
|
#define MSG_AUTO_HOME_Z "Home Z"
|
||||||
#define MSG_LEVEL_BED_HOMING "Homing XYZ"
|
#define MSG_LEVEL_BED_HOMING "Homing XYZ"
|
||||||
#define MSG_LEVEL_BED_WAITING "Klik voor begin"
|
#define MSG_LEVEL_BED_WAITING "Klik voor begin"
|
||||||
|
#define MSG_LEVEL_BED_NEXT_POINT "Volgende Plaats"
|
||||||
#define MSG_LEVEL_BED_DONE "Bed level kompl."
|
#define MSG_LEVEL_BED_DONE "Bed level kompl."
|
||||||
#define MSG_LEVEL_BED_CANCEL "Bed level afbr."
|
#define MSG_LEVEL_BED_CANCEL "Bed level afbr."
|
||||||
#define MSG_SET_HOME_OFFSETS "Zet home offsets"
|
#define MSG_SET_HOME_OFFSETS "Zet home offsets"
|
||||||
@ -48,13 +53,13 @@
|
|||||||
#define MSG_SET_ORIGIN "Nulpunt instellen"
|
#define MSG_SET_ORIGIN "Nulpunt instellen"
|
||||||
#define MSG_PREHEAT_1 "PLA voorverwarmen"
|
#define MSG_PREHEAT_1 "PLA voorverwarmen"
|
||||||
#define MSG_PREHEAT_1_N "PLA voorverw. "
|
#define MSG_PREHEAT_1_N "PLA voorverw. "
|
||||||
#define MSG_PREHEAT_1_ALL "PLA voorverw. aan"
|
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1_N "aan"
|
||||||
#define MSG_PREHEAT_1_BEDONLY "PLA voorverw. Bed"
|
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1_N "Bed"
|
||||||
#define MSG_PREHEAT_1_SETTINGS "PLA verw. conf"
|
#define MSG_PREHEAT_1_SETTINGS "PLA verw. conf"
|
||||||
#define MSG_PREHEAT_2 "ABS voorverwarmen"
|
#define MSG_PREHEAT_2 "ABS voorverwarmen"
|
||||||
#define MSG_PREHEAT_2_N "ABS voorverw. "
|
#define MSG_PREHEAT_2_N "ABS voorverw. "
|
||||||
#define MSG_PREHEAT_2_ALL "ABS voorverw. aan"
|
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2_N "aan"
|
||||||
#define MSG_PREHEAT_2_BEDONLY "ABS voorverw. Bed"
|
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2_N "Bed"
|
||||||
#define MSG_PREHEAT_2_SETTINGS "ABS verw. conf"
|
#define MSG_PREHEAT_2_SETTINGS "ABS verw. conf"
|
||||||
#define MSG_COOLDOWN "Afkoelen"
|
#define MSG_COOLDOWN "Afkoelen"
|
||||||
#define MSG_SWITCH_PS_ON "Stroom aan"
|
#define MSG_SWITCH_PS_ON "Stroom aan"
|
||||||
@ -62,6 +67,7 @@
|
|||||||
#define MSG_EXTRUDE "Extrude"
|
#define MSG_EXTRUDE "Extrude"
|
||||||
#define MSG_RETRACT "Retract"
|
#define MSG_RETRACT "Retract"
|
||||||
#define MSG_MOVE_AXIS "As verplaatsen"
|
#define MSG_MOVE_AXIS "As verplaatsen"
|
||||||
|
#define MSG_LEVEL_BED "Level bed"
|
||||||
#define MSG_MOVE_X "Verplaats X"
|
#define MSG_MOVE_X "Verplaats X"
|
||||||
#define MSG_MOVE_Y "Verplaats Y"
|
#define MSG_MOVE_Y "Verplaats Y"
|
||||||
#define MSG_MOVE_Z "Verplaats Z"
|
#define MSG_MOVE_Z "Verplaats Z"
|
||||||
@ -76,9 +82,9 @@
|
|||||||
#define MSG_FAN_SPEED "Fan snelheid"
|
#define MSG_FAN_SPEED "Fan snelheid"
|
||||||
#define MSG_FLOW "Flow"
|
#define MSG_FLOW "Flow"
|
||||||
#define MSG_CONTROL "Control"
|
#define MSG_CONTROL "Control"
|
||||||
#define MSG_MIN LCD_STR_THERMOMETER " Min"
|
#define MSG_MIN " " LCD_STR_THERMOMETER " Min"
|
||||||
#define MSG_MAX LCD_STR_THERMOMETER " Max"
|
#define MSG_MAX " " LCD_STR_THERMOMETER " Max"
|
||||||
#define MSG_FACTOR LCD_STR_THERMOMETER " Fact"
|
#define MSG_FACTOR " " LCD_STR_THERMOMETER " Fact"
|
||||||
#define MSG_AUTOTEMP "Autotemp"
|
#define MSG_AUTOTEMP "Autotemp"
|
||||||
#define MSG_ON "Aan "
|
#define MSG_ON "Aan "
|
||||||
#define MSG_OFF "Uit"
|
#define MSG_OFF "Uit"
|
||||||
@ -86,6 +92,7 @@
|
|||||||
#define MSG_PID_I "PID-I"
|
#define MSG_PID_I "PID-I"
|
||||||
#define MSG_PID_D "PID-D"
|
#define MSG_PID_D "PID-D"
|
||||||
#define MSG_PID_C "PID-C"
|
#define MSG_PID_C "PID-C"
|
||||||
|
#define MSG_SELECT "Selecteer"
|
||||||
#define MSG_ACC "Versn"
|
#define MSG_ACC "Versn"
|
||||||
#define MSG_VX_JERK "Vx-jerk"
|
#define MSG_VX_JERK "Vx-jerk"
|
||||||
#define MSG_VY_JERK "Vy-jerk"
|
#define MSG_VY_JERK "Vy-jerk"
|
||||||
@ -130,7 +137,7 @@
|
|||||||
#define MSG_NO_MOVE "Geen beweging."
|
#define MSG_NO_MOVE "Geen beweging."
|
||||||
#define MSG_KILLED "Afgebroken. "
|
#define MSG_KILLED "Afgebroken. "
|
||||||
#define MSG_STOPPED "Gestopt. "
|
#define MSG_STOPPED "Gestopt. "
|
||||||
#define MSG_CONTROL_RETRACT "Retract mm"
|
#define MSG_CONTROL_RETRACT "Retract mm" //accepted English term in Dutch
|
||||||
#define MSG_CONTROL_RETRACT_SWAP "Ruil Retract mm"
|
#define MSG_CONTROL_RETRACT_SWAP "Ruil Retract mm"
|
||||||
#define MSG_CONTROL_RETRACTF "Retract F"
|
#define MSG_CONTROL_RETRACTF "Retract F"
|
||||||
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
|
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
|
||||||
@ -142,20 +149,28 @@
|
|||||||
#define MSG_INIT_SDCARD "Init. SD kaart"
|
#define MSG_INIT_SDCARD "Init. SD kaart"
|
||||||
#define MSG_CNG_SDCARD "Verv. SD Kaart"
|
#define MSG_CNG_SDCARD "Verv. SD Kaart"
|
||||||
#define MSG_ZPROBE_OUT "Z probe uit. bed"
|
#define MSG_ZPROBE_OUT "Z probe uit. bed"
|
||||||
|
#define MSG_BLTOUCH_SELFTEST "BLTouch Zelf-Test"
|
||||||
|
#define MSG_BLTOUCH_RESET "Reset BLTouch"
|
||||||
#define MSG_HOME "Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
|
#define MSG_HOME "Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
|
||||||
#define MSG_FIRST "first"
|
#define MSG_FIRST "Eerst"
|
||||||
#define MSG_ZPROBE_ZOFFSET "Z Offset"
|
#define MSG_ZPROBE_ZOFFSET "Z Offset" //accepted English term in Dutch
|
||||||
#define MSG_BABYSTEP_X "Babystap X"
|
#define MSG_BABYSTEP_X "Babystap X"
|
||||||
#define MSG_BABYSTEP_Y "Babystap Y"
|
#define MSG_BABYSTEP_Y "Babystap Y"
|
||||||
#define MSG_BABYSTEP_Z "Babystap Z"
|
#define MSG_BABYSTEP_Z "Babystap Z"
|
||||||
#define MSG_ENDSTOP_ABORT "Endstop afbr."
|
#define MSG_ENDSTOP_ABORT "Endstop afbr."
|
||||||
#define MSG_HEATING_FAILED_LCD "voorverw. fout"
|
#define MSG_HEATING_FAILED_LCD "Voorverw. fout"
|
||||||
#define MSG_ERR_REDUNDANT_TEMP "Redun. temp fout"
|
#define MSG_ERR_REDUNDANT_TEMP "Redun. temp fout"
|
||||||
#define MSG_THERMAL_RUNAWAY "Therm. wegloop"
|
#define MSG_THERMAL_RUNAWAY "Therm. wegloop"
|
||||||
#define MSG_ERR_MAXTEMP "Err: Max. temp"
|
#define MSG_ERR_MAXTEMP "Err: Max. temp"
|
||||||
#define MSG_ERR_MINTEMP "Err: Min. temp"
|
#define MSG_ERR_MINTEMP "Err: Min. temp"
|
||||||
#define MSG_ERR_MAXTEMP_BED "Err: Max.tmp bed"
|
#define MSG_ERR_MAXTEMP_BED "Err: Max.tmp bed"
|
||||||
#define MSG_ERR_MINTEMP_BED "Err: Min.tmp bed"
|
#define MSG_ERR_MINTEMP_BED "Err: Min.tmp bed"
|
||||||
|
#define MSG_ERR_Z_HOMING "Fout Z homing"
|
||||||
|
#define MSG_HALTED "PRINTER GESTOPT"
|
||||||
|
#define MSG_PLEASE_RESET "Reset A.U.B."
|
||||||
|
#define MSG_SHORT_DAY "d" // One character only. Keep English standard
|
||||||
|
#define MSG_SHORT_HOUR "h" // One character only
|
||||||
|
#define MSG_SHORT_MINUTE "m" // One character only
|
||||||
#define MSG_HEATING "Voorwarmen..."
|
#define MSG_HEATING "Voorwarmen..."
|
||||||
#define MSG_HEATING_COMPLETE "Voorverw. kompl."
|
#define MSG_HEATING_COMPLETE "Voorverw. kompl."
|
||||||
#define MSG_BED_HEATING "Bed voorverw."
|
#define MSG_BED_HEATING "Bed voorverw."
|
||||||
@ -166,4 +181,81 @@
|
|||||||
#define MSG_DELTA_CALIBRATE_Z "Kalibreer Z"
|
#define MSG_DELTA_CALIBRATE_Z "Kalibreer Z"
|
||||||
#define MSG_DELTA_CALIBRATE_CENTER "Kalibreer Midden"
|
#define MSG_DELTA_CALIBRATE_CENTER "Kalibreer Midden"
|
||||||
|
|
||||||
|
#define MSG_INFO_STATS_MENU "Printer Stats"
|
||||||
|
#define MSG_INFO_BOARD_MENU "Board Info" //accepted English term in Dutch
|
||||||
|
#define MSG_INFO_THERMISTOR_MENU "Thermistors"
|
||||||
|
#define MSG_INFO_EXTRUDERS "Extruders"
|
||||||
|
#define MSG_INFO_BAUDRATE "Baud"
|
||||||
|
#define MSG_INFO_MENU "Over Printer"
|
||||||
|
#define MSG_INFO_PRINTER_MENU "Printer Info"
|
||||||
|
#define MSG_INFO_PROTOCOL "Protocol"
|
||||||
|
#define MSG_LIGHTS_ON "Case licht aan"
|
||||||
|
#define MSG_LIGHTS_OFF "Case licht uit"
|
||||||
|
|
||||||
|
#if LCD_WIDTH >= 20
|
||||||
|
#define MSG_INFO_PRINT_COUNT "Printed Aantal"
|
||||||
|
#define MSG_INFO_COMPLETED_PRINTS "Totaal Voltooid"
|
||||||
|
#define MSG_INFO_PRINT_TIME "Totale Printtijd"
|
||||||
|
#define MSG_INFO_PRINT_LONGEST "Langste Printtijd"
|
||||||
|
#define MSG_INFO_PRINT_FILAMENT "Totaal Extrudeert"
|
||||||
|
#else
|
||||||
|
#define MSG_INFO_PRINT_COUNT "Aantal"
|
||||||
|
#define MSG_INFO_COMPLETED_PRINTS "Voltooid"
|
||||||
|
#define MSG_INFO_PRINT_TIME "Printtijd "
|
||||||
|
#define MSG_INFO_PRINT_LONGEST "Langste"
|
||||||
|
#define MSG_INFO_PRINT_FILAMENT "Extrud."
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define MSG_INFO_MIN_TEMP "Min Temp"
|
||||||
|
#define MSG_INFO_MAX_TEMP "Max Temp"
|
||||||
|
#define MSG_INFO_PSU "Power Supply" //accepted English term in Dutch
|
||||||
|
|
||||||
|
#define MSG_DRIVE_STRENGTH "Motorstroom"
|
||||||
|
#define MSG_DAC_PERCENT "Driver %" //accepted English term in Dutch
|
||||||
|
#define MSG_DAC_EEPROM_WRITE "DAC Opslaan"
|
||||||
|
#define MSG_FILAMENT_CHANGE_HEADER "WISSEL FILAMENT"
|
||||||
|
#define MSG_FILAMENT_CHANGE_OPTION_HEADER "WISSEL OPTIES:"
|
||||||
|
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "Extrudeer meer"
|
||||||
|
#define MSG_FILAMENT_CHANGE_OPTION_RESUME "Hervat print"
|
||||||
|
|
||||||
|
//
|
||||||
|
// Filament Change screens show up to 3 lines on a 4-line display
|
||||||
|
// ...or up to 2 lines on a 3-line display
|
||||||
|
//
|
||||||
|
#if LCD_HEIGHT >= 4
|
||||||
|
// Up to 3 lines
|
||||||
|
#define MSG_FILAMENT_CHANGE_INIT_1 "Wacht voor start"
|
||||||
|
#define MSG_FILAMENT_CHANGE_INIT_2 "filament te"
|
||||||
|
#define MSG_FILAMENT_CHANGE_INIT_3 "verwisselen"
|
||||||
|
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Wacht voor"
|
||||||
|
#define MSG_FILAMENT_CHANGE_UNLOAD_2 "filament uit"
|
||||||
|
#define MSG_FILAMENT_CHANGE_UNLOAD_3 "te laden"
|
||||||
|
#define MSG_FILAMENT_CHANGE_INSERT_1 "Laad filament"
|
||||||
|
#define MSG_FILAMENT_CHANGE_INSERT_2 "en druk knop"
|
||||||
|
#define MSG_FILAMENT_CHANGE_INSERT_3 "om verder..."
|
||||||
|
#define MSG_FILAMENT_CHANGE_LOAD_1 "Wacht voor"
|
||||||
|
#define MSG_FILAMENT_CHANGE_LOAD_2 "filament te"
|
||||||
|
#define MSG_FILAMENT_CHANGE_LOAD_3 "laden"
|
||||||
|
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Wacht voor"
|
||||||
|
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 "filament te"
|
||||||
|
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 "extruderen"
|
||||||
|
#define MSG_FILAMENT_CHANGE_RESUME_1 "Wacht voor print"
|
||||||
|
#define MSG_FILAMENT_CHANGE_RESUME_2 "om verder"
|
||||||
|
#define MSG_FILAMENT_CHANGE_RESUME_3 "te gaan"
|
||||||
|
#else // LCD_HEIGHT < 4
|
||||||
|
// Up to 2 lines
|
||||||
|
#define MSG_FILAMENT_CHANGE_INIT_1 "Wacht voor"
|
||||||
|
#define MSG_FILAMENT_CHANGE_INIT_2 "start..."
|
||||||
|
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Wacht voor"
|
||||||
|
#define MSG_FILAMENT_CHANGE_UNLOAD_2 "uitladen..."
|
||||||
|
#define MSG_FILAMENT_CHANGE_INSERT_1 "Laad filament"
|
||||||
|
#define MSG_FILAMENT_CHANGE_INSERT_2 "en druk knop"
|
||||||
|
#define MSG_FILAMENT_CHANGE_LOAD_1 "Wacht voor"
|
||||||
|
#define MSG_FILAMENT_CHANGE_LOAD_2 "inladen..."
|
||||||
|
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Wacht voor"
|
||||||
|
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 "extrudering"
|
||||||
|
#define MSG_FILAMENT_CHANGE_RESUME_1 "Wacht voor"
|
||||||
|
#define MSG_FILAMENT_CHANGE_RESUME_2 "printing..."
|
||||||
|
#endif // LCD_HEIGHT < 4
|
||||||
|
|
||||||
#endif // LANGUAGE_NL_H
|
#endif // LANGUAGE_NL_H
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user