From 2512871a36be74d55d60cc2c07c492e7eb8c106f Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sat, 18 Mar 2017 12:20:26 -0500 Subject: [PATCH] Patch configs UBL followup --- Marlin/Configuration.h | 18 +++++++++--------- .../Cartesio/Configuration.h | 18 +++++++++--------- .../Felix/DUAL/Configuration.h | 18 +++++++++--------- .../Hephestos/Configuration.h | 18 +++++++++--------- .../Hephestos_2/Configuration.h | 18 +++++++++--------- .../K8200/Configuration.h | 18 +++++++++--------- .../K8400/Configuration.h | 18 +++++++++--------- .../K8400/Dual-head/Configuration.h | 18 +++++++++--------- .../RepRapWorld/Megatronics/Configuration.h | 18 +++++++++--------- .../RigidBot/Configuration.h | 18 +++++++++--------- .../Folger_Tech_i3_2020/Configuration.h | 18 +++++++++--------- .../Roxys_printers/gMax_1.5+/Configuration.h | 18 +++++++++--------- .../original_release_files/Configuration.h | 18 +++++++++--------- .../SCARA/Configuration.h | 18 +++++++++--------- .../TAZ4/Configuration.h | 18 +++++++++--------- .../WITBOX/Configuration.h | 18 +++++++++--------- .../adafruit/ST7565/Configuration.h | 18 +++++++++--------- .../delta/flsun_kossel_mini/Configuration.h | 18 +++++++++--------- .../delta/generic/Configuration.h | 18 +++++++++--------- .../delta/kossel_mini/Configuration.h | 18 +++++++++--------- .../delta/kossel_pro/Configuration.h | 18 +++++++++--------- .../delta/kossel_xl/Configuration.h | 18 +++++++++--------- .../makibox/Configuration.h | 18 +++++++++--------- .../tvrrug/Round2/Configuration.h | 18 +++++++++--------- 24 files changed, 216 insertions(+), 216 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index fd9560530..465b8df8f 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -843,28 +843,28 @@ #elif ENABLED(MESH_BED_LEVELING) -//=========================================================================== -//=================================== Mesh ================================== -//=========================================================================== + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== - #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0. + #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment #define MESH_INSET 10 // Mesh inset margin on print area #define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited. #define MESH_NUM_Y_POINTS 3 - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0] + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS //#define MANUAL_BED_LEVELING // Add display menu option for bed leveling. #if ENABLED(MANUAL_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. - #endif // MANUAL_BED_LEVELING + #endif #elif ENABLED(AUTO_BED_LEVELING_UBL) -//=========================================================================== -//========================= Unified Bed Leveling ============================ -//=========================================================================== + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited. diff --git a/Marlin/example_configurations/Cartesio/Configuration.h b/Marlin/example_configurations/Cartesio/Configuration.h index 213d784f9..8b944a81a 100644 --- a/Marlin/example_configurations/Cartesio/Configuration.h +++ b/Marlin/example_configurations/Cartesio/Configuration.h @@ -843,28 +843,28 @@ #elif ENABLED(MESH_BED_LEVELING) -//=========================================================================== -//=================================== Mesh ================================== -//=========================================================================== + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== - #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0. + #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment #define MESH_INSET 10 // Mesh inset margin on print area #define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited. #define MESH_NUM_Y_POINTS 3 - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0] + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS //#define MANUAL_BED_LEVELING // Add display menu option for bed leveling. #if ENABLED(MANUAL_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. - #endif // MANUAL_BED_LEVELING + #endif #elif ENABLED(AUTO_BED_LEVELING_UBL) -//=========================================================================== -//========================= Unified Bed Leveling ============================ -//=========================================================================== + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited. diff --git a/Marlin/example_configurations/Felix/DUAL/Configuration.h b/Marlin/example_configurations/Felix/DUAL/Configuration.h index 971e4742e..c987fdf72 100644 --- a/Marlin/example_configurations/Felix/DUAL/Configuration.h +++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h @@ -826,28 +826,28 @@ #elif ENABLED(MESH_BED_LEVELING) -//=========================================================================== -//=================================== Mesh ================================== -//=========================================================================== + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== - #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0. + #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment #define MESH_INSET 10 // Mesh inset margin on print area #define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited. #define MESH_NUM_Y_POINTS 3 - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0] + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS //#define MANUAL_BED_LEVELING // Add display menu option for bed leveling. #if ENABLED(MANUAL_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. - #endif // MANUAL_BED_LEVELING + #endif #elif ENABLED(AUTO_BED_LEVELING_UBL) -//=========================================================================== -//========================= Unified Bed Leveling ============================ -//=========================================================================== + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited. diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h index 1bd8eaafc..57a8d3b24 100644 --- a/Marlin/example_configurations/Hephestos/Configuration.h +++ b/Marlin/example_configurations/Hephestos/Configuration.h @@ -835,28 +835,28 @@ #elif ENABLED(MESH_BED_LEVELING) -//=========================================================================== -//=================================== Mesh ================================== -//=========================================================================== + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== - #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0. + #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment #define MESH_INSET 10 // Mesh inset margin on print area #define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited. #define MESH_NUM_Y_POINTS 3 - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0] + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS //#define MANUAL_BED_LEVELING // Add display menu option for bed leveling. #if ENABLED(MANUAL_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. - #endif // MANUAL_BED_LEVELING + #endif #elif ENABLED(AUTO_BED_LEVELING_UBL) -//=========================================================================== -//========================= Unified Bed Leveling ============================ -//=========================================================================== + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited. diff --git a/Marlin/example_configurations/Hephestos_2/Configuration.h b/Marlin/example_configurations/Hephestos_2/Configuration.h index 75d5a8705..c704710e0 100644 --- a/Marlin/example_configurations/Hephestos_2/Configuration.h +++ b/Marlin/example_configurations/Hephestos_2/Configuration.h @@ -837,28 +837,28 @@ #elif ENABLED(MESH_BED_LEVELING) -//=========================================================================== -//=================================== Mesh ================================== -//=========================================================================== + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== - #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0. + #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment #define MESH_INSET 10 // Mesh inset margin on print area #define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited. #define MESH_NUM_Y_POINTS 3 - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0] + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS //#define MANUAL_BED_LEVELING // Add display menu option for bed leveling. #if ENABLED(MANUAL_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. - #endif // MANUAL_BED_LEVELING + #endif #elif ENABLED(AUTO_BED_LEVELING_UBL) -//=========================================================================== -//========================= Unified Bed Leveling ============================ -//=========================================================================== + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited. diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h index 525ad6cba..16a1a09dd 100644 --- a/Marlin/example_configurations/K8200/Configuration.h +++ b/Marlin/example_configurations/K8200/Configuration.h @@ -872,28 +872,28 @@ #elif ENABLED(MESH_BED_LEVELING) -//=========================================================================== -//=================================== Mesh ================================== -//=========================================================================== + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== - #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0. + #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment #define MESH_INSET 10 // Mesh inset margin on print area #define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited. #define MESH_NUM_Y_POINTS 3 - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0] + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS //#define MANUAL_BED_LEVELING // Add display menu option for bed leveling. #if ENABLED(MANUAL_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. - #endif // MANUAL_BED_LEVELING + #endif #elif ENABLED(AUTO_BED_LEVELING_UBL) -//=========================================================================== -//========================= Unified Bed Leveling ============================ -//=========================================================================== + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited. diff --git a/Marlin/example_configurations/K8400/Configuration.h b/Marlin/example_configurations/K8400/Configuration.h index c0ac1e099..fa74835ea 100644 --- a/Marlin/example_configurations/K8400/Configuration.h +++ b/Marlin/example_configurations/K8400/Configuration.h @@ -843,28 +843,28 @@ #elif ENABLED(MESH_BED_LEVELING) -//=========================================================================== -//=================================== Mesh ================================== -//=========================================================================== + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== - #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0. + #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment #define MESH_INSET 10 // Mesh inset margin on print area #define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited. #define MESH_NUM_Y_POINTS 3 - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0] + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS //#define MANUAL_BED_LEVELING // Add display menu option for bed leveling. #if ENABLED(MANUAL_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. - #endif // MANUAL_BED_LEVELING + #endif #elif ENABLED(AUTO_BED_LEVELING_UBL) -//=========================================================================== -//========================= Unified Bed Leveling ============================ -//=========================================================================== + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited. diff --git a/Marlin/example_configurations/K8400/Dual-head/Configuration.h b/Marlin/example_configurations/K8400/Dual-head/Configuration.h index 2446f2e8b..570f3ad2a 100644 --- a/Marlin/example_configurations/K8400/Dual-head/Configuration.h +++ b/Marlin/example_configurations/K8400/Dual-head/Configuration.h @@ -843,28 +843,28 @@ #elif ENABLED(MESH_BED_LEVELING) -//=========================================================================== -//=================================== Mesh ================================== -//=========================================================================== + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== - #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0. + #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment #define MESH_INSET 10 // Mesh inset margin on print area #define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited. #define MESH_NUM_Y_POINTS 3 - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0] + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS //#define MANUAL_BED_LEVELING // Add display menu option for bed leveling. #if ENABLED(MANUAL_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. - #endif // MANUAL_BED_LEVELING + #endif #elif ENABLED(AUTO_BED_LEVELING_UBL) -//=========================================================================== -//========================= Unified Bed Leveling ============================ -//=========================================================================== + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited. diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h index a63c6bbfc..9d462ebd4 100644 --- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h +++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h @@ -843,28 +843,28 @@ #elif ENABLED(MESH_BED_LEVELING) -//=========================================================================== -//=================================== Mesh ================================== -//=========================================================================== + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== - #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0. + #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment #define MESH_INSET 10 // Mesh inset margin on print area #define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited. #define MESH_NUM_Y_POINTS 3 - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0] + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS //#define MANUAL_BED_LEVELING // Add display menu option for bed leveling. #if ENABLED(MANUAL_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. - #endif // MANUAL_BED_LEVELING + #endif #elif ENABLED(AUTO_BED_LEVELING_UBL) -//=========================================================================== -//========================= Unified Bed Leveling ============================ -//=========================================================================== + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited. diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h index 96ad268e4..6eb5318a9 100644 --- a/Marlin/example_configurations/RigidBot/Configuration.h +++ b/Marlin/example_configurations/RigidBot/Configuration.h @@ -842,28 +842,28 @@ #elif ENABLED(MESH_BED_LEVELING) -//=========================================================================== -//=================================== Mesh ================================== -//=========================================================================== + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== - #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0. + #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment #define MESH_INSET 10 // Mesh inset margin on print area #define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited. #define MESH_NUM_Y_POINTS 3 - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0] + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS //#define MANUAL_BED_LEVELING // Add display menu option for bed leveling. #if ENABLED(MANUAL_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. - #endif // MANUAL_BED_LEVELING + #endif #elif ENABLED(AUTO_BED_LEVELING_UBL) -//=========================================================================== -//========================= Unified Bed Leveling ============================ -//=========================================================================== + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited. diff --git a/Marlin/example_configurations/Roxys_printers/Folger_Tech_i3_2020/Configuration.h b/Marlin/example_configurations/Roxys_printers/Folger_Tech_i3_2020/Configuration.h index 145ef5309..3aea5e71e 100644 --- a/Marlin/example_configurations/Roxys_printers/Folger_Tech_i3_2020/Configuration.h +++ b/Marlin/example_configurations/Roxys_printers/Folger_Tech_i3_2020/Configuration.h @@ -845,28 +845,28 @@ #elif ENABLED(MESH_BED_LEVELING) -//=========================================================================== -//=================================== Mesh ================================== -//=========================================================================== + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== - #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0. + #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment #define MESH_INSET 10 // Mesh inset margin on print area #define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited. #define MESH_NUM_Y_POINTS 3 - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0] + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS //#define MANUAL_BED_LEVELING // Add display menu option for bed leveling. #if ENABLED(MANUAL_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. - #endif // MANUAL_BED_LEVELING + #endif #elif ENABLED(AUTO_BED_LEVELING_UBL) -//=========================================================================== -//========================= Unified Bed Leveling ============================ -//=========================================================================== + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited. diff --git a/Marlin/example_configurations/Roxys_printers/gMax_1.5+/Configuration.h b/Marlin/example_configurations/Roxys_printers/gMax_1.5+/Configuration.h index 5215743c8..113455aa5 100644 --- a/Marlin/example_configurations/Roxys_printers/gMax_1.5+/Configuration.h +++ b/Marlin/example_configurations/Roxys_printers/gMax_1.5+/Configuration.h @@ -842,28 +842,28 @@ #elif ENABLED(MESH_BED_LEVELING) -//=========================================================================== -//=================================== Mesh ================================== -//=========================================================================== + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== - #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0. + #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment #define MESH_INSET 10 // Mesh inset margin on print area #define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited. #define MESH_NUM_Y_POINTS 3 - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0] + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS //#define MANUAL_BED_LEVELING // Add display menu option for bed leveling. #if ENABLED(MANUAL_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. - #endif // MANUAL_BED_LEVELING + #endif #elif ENABLED(AUTO_BED_LEVELING_UBL) -//=========================================================================== -//========================= Unified Bed Leveling ============================ -//=========================================================================== + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited. diff --git a/Marlin/example_configurations/Roxys_printers/original_release_files/Configuration.h b/Marlin/example_configurations/Roxys_printers/original_release_files/Configuration.h index e1d3080f3..e8043b0b7 100644 --- a/Marlin/example_configurations/Roxys_printers/original_release_files/Configuration.h +++ b/Marlin/example_configurations/Roxys_printers/original_release_files/Configuration.h @@ -845,28 +845,28 @@ #elif ENABLED(MESH_BED_LEVELING) -//=========================================================================== -//=================================== Mesh ================================== -//=========================================================================== + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== - #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0. + #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment #define MESH_INSET 10 // Mesh inset margin on print area #define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited. #define MESH_NUM_Y_POINTS 3 - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0] + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS //#define MANUAL_BED_LEVELING // Add display menu option for bed leveling. #if ENABLED(MANUAL_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. - #endif // MANUAL_BED_LEVELING + #endif #elif ENABLED(AUTO_BED_LEVELING_UBL) -//=========================================================================== -//========================= Unified Bed Leveling ============================ -//=========================================================================== + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited. diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h index f91d6db1d..1b76ccef0 100644 --- a/Marlin/example_configurations/SCARA/Configuration.h +++ b/Marlin/example_configurations/SCARA/Configuration.h @@ -858,28 +858,28 @@ #elif ENABLED(MESH_BED_LEVELING) -//=========================================================================== -//=================================== Mesh ================================== -//=========================================================================== + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== - #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0. + #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment #define MESH_INSET 10 // Mesh inset margin on print area #define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited. #define MESH_NUM_Y_POINTS 3 - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0] + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS //#define MANUAL_BED_LEVELING // Add display menu option for bed leveling. #if ENABLED(MANUAL_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. - #endif // MANUAL_BED_LEVELING + #endif #elif ENABLED(AUTO_BED_LEVELING_UBL) -//=========================================================================== -//========================= Unified Bed Leveling ============================ -//=========================================================================== + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited. diff --git a/Marlin/example_configurations/TAZ4/Configuration.h b/Marlin/example_configurations/TAZ4/Configuration.h index c960daee9..ffda09ba0 100644 --- a/Marlin/example_configurations/TAZ4/Configuration.h +++ b/Marlin/example_configurations/TAZ4/Configuration.h @@ -864,28 +864,28 @@ #elif ENABLED(MESH_BED_LEVELING) -//=========================================================================== -//=================================== Mesh ================================== -//=========================================================================== + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== - #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0. + #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment #define MESH_INSET 10 // Mesh inset margin on print area #define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited. #define MESH_NUM_Y_POINTS 3 - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0] + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS //#define MANUAL_BED_LEVELING // Add display menu option for bed leveling. #if ENABLED(MANUAL_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. - #endif // MANUAL_BED_LEVELING + #endif #elif ENABLED(AUTO_BED_LEVELING_UBL) -//=========================================================================== -//========================= Unified Bed Leveling ============================ -//=========================================================================== + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited. diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h index 2b81df5b9..998b692e9 100644 --- a/Marlin/example_configurations/WITBOX/Configuration.h +++ b/Marlin/example_configurations/WITBOX/Configuration.h @@ -835,28 +835,28 @@ #elif ENABLED(MESH_BED_LEVELING) -//=========================================================================== -//=================================== Mesh ================================== -//=========================================================================== + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== - #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0. + #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment #define MESH_INSET 10 // Mesh inset margin on print area #define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited. #define MESH_NUM_Y_POINTS 3 - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0] + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS //#define MANUAL_BED_LEVELING // Add display menu option for bed leveling. #if ENABLED(MANUAL_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. - #endif // MANUAL_BED_LEVELING + #endif #elif ENABLED(AUTO_BED_LEVELING_UBL) -//=========================================================================== -//========================= Unified Bed Leveling ============================ -//=========================================================================== + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited. diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h index cbe68eefa..bc22703f7 100644 --- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h +++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h @@ -843,28 +843,28 @@ #elif ENABLED(MESH_BED_LEVELING) -//=========================================================================== -//=================================== Mesh ================================== -//=========================================================================== + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== - #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0. + #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment #define MESH_INSET 10 // Mesh inset margin on print area #define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited. #define MESH_NUM_Y_POINTS 3 - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0] + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS //#define MANUAL_BED_LEVELING // Add display menu option for bed leveling. #if ENABLED(MANUAL_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. - #endif // MANUAL_BED_LEVELING + #endif #elif ENABLED(AUTO_BED_LEVELING_UBL) -//=========================================================================== -//========================= Unified Bed Leveling ============================ -//=========================================================================== + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited. diff --git a/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration.h b/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration.h index d16f2cdb1..5f0a8ee0a 100644 --- a/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration.h @@ -948,28 +948,28 @@ #elif ENABLED(MESH_BED_LEVELING) -//=========================================================================== -//=================================== Mesh ================================== -//=========================================================================== + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== - #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0. + #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment #define MESH_INSET 10 // Mesh inset margin on print area #define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited. #define MESH_NUM_Y_POINTS 3 - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0] + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS //#define MANUAL_BED_LEVELING // Add display menu option for bed leveling. #if ENABLED(MANUAL_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. - #endif // MANUAL_BED_LEVELING + #endif #elif ENABLED(AUTO_BED_LEVELING_UBL) -//=========================================================================== -//========================= Unified Bed Leveling ============================ -//=========================================================================== + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited. diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h index dcb2f49f8..a1fe690f2 100644 --- a/Marlin/example_configurations/delta/generic/Configuration.h +++ b/Marlin/example_configurations/delta/generic/Configuration.h @@ -934,28 +934,28 @@ #elif ENABLED(MESH_BED_LEVELING) -//=========================================================================== -//=================================== Mesh ================================== -//=========================================================================== + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== - #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0. + #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment #define MESH_INSET 10 // Mesh inset margin on print area #define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited. #define MESH_NUM_Y_POINTS 3 - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0] + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS //#define MANUAL_BED_LEVELING // Add display menu option for bed leveling. #if ENABLED(MANUAL_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. - #endif // MANUAL_BED_LEVELING + #endif #elif ENABLED(AUTO_BED_LEVELING_UBL) -//=========================================================================== -//========================= Unified Bed Leveling ============================ -//=========================================================================== + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited. diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h index 590e69e0f..690a0ac71 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h @@ -938,28 +938,28 @@ #elif ENABLED(MESH_BED_LEVELING) -//=========================================================================== -//=================================== Mesh ================================== -//=========================================================================== + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== - #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0. + #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment #define MESH_INSET 10 // Mesh inset margin on print area #define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited. #define MESH_NUM_Y_POINTS 3 - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0] + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS //#define MANUAL_BED_LEVELING // Add display menu option for bed leveling. #if ENABLED(MANUAL_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. - #endif // MANUAL_BED_LEVELING + #endif #elif ENABLED(AUTO_BED_LEVELING_UBL) -//=========================================================================== -//========================= Unified Bed Leveling ============================ -//=========================================================================== + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited. diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h index f936195a1..af36b4def 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h @@ -937,28 +937,28 @@ #elif ENABLED(MESH_BED_LEVELING) -//=========================================================================== -//=================================== Mesh ================================== -//=========================================================================== + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== - #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0. + #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment #define MESH_INSET 10 // Mesh inset margin on print area #define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited. #define MESH_NUM_Y_POINTS 3 - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0] + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS //#define MANUAL_BED_LEVELING // Add display menu option for bed leveling. #if ENABLED(MANUAL_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. - #endif // MANUAL_BED_LEVELING + #endif #elif ENABLED(AUTO_BED_LEVELING_UBL) -//=========================================================================== -//========================= Unified Bed Leveling ============================ -//=========================================================================== + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited. diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h index 4bd2e05fc..0e3410227 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h @@ -947,28 +947,28 @@ #elif ENABLED(MESH_BED_LEVELING) -//=========================================================================== -//=================================== Mesh ================================== -//=========================================================================== + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== - #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0. + #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment #define MESH_INSET 10 // Mesh inset margin on print area #define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited. #define MESH_NUM_Y_POINTS 3 - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0] + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS //#define MANUAL_BED_LEVELING // Add display menu option for bed leveling. #if ENABLED(MANUAL_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. - #endif // MANUAL_BED_LEVELING + #endif #elif ENABLED(AUTO_BED_LEVELING_UBL) -//=========================================================================== -//========================= Unified Bed Leveling ============================ -//=========================================================================== + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited. diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h index 628618c0e..0d5b87ff8 100644 --- a/Marlin/example_configurations/makibox/Configuration.h +++ b/Marlin/example_configurations/makibox/Configuration.h @@ -846,28 +846,28 @@ #elif ENABLED(MESH_BED_LEVELING) -//=========================================================================== -//=================================== Mesh ================================== -//=========================================================================== + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== - #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0. + #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment #define MESH_INSET 10 // Mesh inset margin on print area #define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited. #define MESH_NUM_Y_POINTS 3 - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0] + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS //#define MANUAL_BED_LEVELING // Add display menu option for bed leveling. #if ENABLED(MANUAL_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. - #endif // MANUAL_BED_LEVELING + #endif #elif ENABLED(AUTO_BED_LEVELING_UBL) -//=========================================================================== -//========================= Unified Bed Leveling ============================ -//=========================================================================== + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited. diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h index f5896430c..ec0b87f80 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h @@ -839,28 +839,28 @@ #elif ENABLED(MESH_BED_LEVELING) -//=========================================================================== -//=================================== Mesh ================================== -//=========================================================================== + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== - #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0. + #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment #define MESH_INSET 10 // Mesh inset margin on print area #define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited. #define MESH_NUM_Y_POINTS 3 - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0] + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS //#define MANUAL_BED_LEVELING // Add display menu option for bed leveling. #if ENABLED(MANUAL_BED_LEVELING) #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. - #endif // MANUAL_BED_LEVELING + #endif #elif ENABLED(AUTO_BED_LEVELING_UBL) -//=========================================================================== -//========================= Unified Bed Leveling ============================ -//=========================================================================== + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited.