MAGNETIC_SWITCHING_TOOLHEAD (#13629)
This commit is contained in:
parent
492883859e
commit
2adc37becc
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -335,7 +335,7 @@ void menu_move() {
|
||||
else
|
||||
MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28"));
|
||||
|
||||
#if EITHER(SWITCHING_EXTRUDER, SWITCHING_NOZZLE)
|
||||
#if ANY(SWITCHING_EXTRUDER, SWITCHING_NOZZLE, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
|
||||
#if EXTRUDERS == 6
|
||||
switch (active_extruder) {
|
||||
|
@ -487,6 +487,133 @@ inline void fast_line_to_current(const AxisEnum fr_axis) {
|
||||
|
||||
#endif // SWITCHING_TOOLHEAD
|
||||
|
||||
#if ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
|
||||
inline void magnetic_switching_toolhead_tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool no_move/*=false*/) {
|
||||
if (no_move) return;
|
||||
|
||||
const float toolheadposx[] = SWITCHING_TOOLHEAD_X_POS,
|
||||
placexpos = toolheadposx[active_extruder],
|
||||
grabxpos = toolheadposx[tmp_extruder];
|
||||
|
||||
/**
|
||||
* 1. Raise Z to give enough clearance
|
||||
* 2. Move to switch position of current toolhead
|
||||
* 3. Release and place toolhead in the dock
|
||||
* 4. Move to the new toolhead
|
||||
* 5. Grab the new toolhead and move to security position
|
||||
*/
|
||||
|
||||
if (DEBUGGING(LEVELING)) DEBUG_POS("Starting Toolhead change", current_position);
|
||||
|
||||
// 1. Raise Z to give enough clearance
|
||||
|
||||
current_position[Z_AXIS] += toolchange_settings.z_raise;
|
||||
|
||||
if (DEBUGGING(LEVELING)) DEBUG_POS("(1) Raise Z-Axis", current_position);
|
||||
|
||||
planner.buffer_line(current_position, planner.settings.max_feedrate_mm_s[Z_AXIS], active_extruder);
|
||||
planner.synchronize();
|
||||
|
||||
// 2. Move to switch position current toolhead
|
||||
|
||||
current_position[Y_AXIS] = SWITCHING_TOOLHEAD_Y_POS + SWITCHING_TOOLHEAD_Y_CLEAR;
|
||||
|
||||
if (DEBUGGING(LEVELING)) {
|
||||
SERIAL_ECHOLNPAIR("(2) Place old tool ", int(active_extruder));
|
||||
DEBUG_POS("Move Y SwitchPos + Security", current_position);
|
||||
}
|
||||
|
||||
planner.buffer_line(current_position, planner.settings.max_feedrate_mm_s[Y_AXIS], active_extruder);
|
||||
planner.synchronize();
|
||||
|
||||
current_position[X_AXIS] = placexpos + SWITCHING_TOOLHEAD_X_SECURITY;
|
||||
|
||||
if (DEBUGGING(LEVELING)) DEBUG_POS("Move X SwitchPos + Security", current_position);
|
||||
|
||||
planner.buffer_line(current_position, planner.settings.max_feedrate_mm_s[X_AXIS], active_extruder);
|
||||
planner.synchronize();
|
||||
|
||||
current_position[Y_AXIS] = SWITCHING_TOOLHEAD_Y_POS;
|
||||
|
||||
if (DEBUGGING(LEVELING)) DEBUG_POS("Move Y SwitchPos", current_position);
|
||||
|
||||
planner.buffer_line(current_position, planner.settings.max_feedrate_mm_s[Y_AXIS], active_extruder);
|
||||
planner.synchronize();
|
||||
|
||||
current_position[X_AXIS] = placexpos;
|
||||
|
||||
if (DEBUGGING(LEVELING)) DEBUG_POS("Move X SwitchPos", current_position);
|
||||
|
||||
planner.buffer_line(current_position, (planner.settings.max_feedrate_mm_s[X_AXIS] * 0.25), active_extruder);
|
||||
planner.synchronize();
|
||||
|
||||
// 3. Release and place toolhead in the dock
|
||||
|
||||
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("(3) Release and Place Toolhead");
|
||||
|
||||
current_position[Y_AXIS] = SWITCHING_TOOLHEAD_Y_POS + SWITCHING_TOOLHEAD_Y_RELEASE;
|
||||
|
||||
if (DEBUGGING(LEVELING)) DEBUG_POS("Move Y SwitchPos + Release", current_position);
|
||||
|
||||
planner.buffer_line(current_position, (planner.settings.max_feedrate_mm_s[Y_AXIS] * 0.1), active_extruder);
|
||||
planner.synchronize();
|
||||
|
||||
current_position[Y_AXIS] = SWITCHING_TOOLHEAD_Y_POS + SWITCHING_TOOLHEAD_Y_SECURITY;
|
||||
|
||||
if (DEBUGGING(LEVELING)) DEBUG_POS("Move Y SwitchPos + Security", current_position);
|
||||
|
||||
planner.buffer_line(current_position, (planner.settings.max_feedrate_mm_s[Y_AXIS]), active_extruder);
|
||||
planner.synchronize();
|
||||
|
||||
// 4. Move to new toolhead position
|
||||
|
||||
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("(4) Move to new toolhead position");
|
||||
|
||||
current_position[X_AXIS] = grabxpos;
|
||||
|
||||
if (DEBUGGING(LEVELING)) DEBUG_POS("Move to new toolhead X", current_position);
|
||||
|
||||
planner.buffer_line(current_position, planner.settings.max_feedrate_mm_s[X_AXIS], active_extruder);
|
||||
planner.synchronize();
|
||||
|
||||
// 5. Grab the new toolhead and move to security position
|
||||
|
||||
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("(5) Grab new toolhead and move to security position");
|
||||
|
||||
current_position[Y_AXIS] = SWITCHING_TOOLHEAD_Y_POS + SWITCHING_TOOLHEAD_Y_RELEASE;
|
||||
|
||||
if (DEBUGGING(LEVELING)) DEBUG_POS("Move Y SwitchPos + Release", current_position);
|
||||
|
||||
planner.buffer_line(current_position, (planner.settings.max_feedrate_mm_s[Y_AXIS]), active_extruder);
|
||||
planner.synchronize();
|
||||
|
||||
current_position[Y_AXIS] = SWITCHING_TOOLHEAD_Y_POS;
|
||||
|
||||
if (DEBUGGING(LEVELING)) DEBUG_POS("Move Y SwitchPos", current_position);
|
||||
|
||||
planner.buffer_line(current_position, planner.settings.max_feedrate_mm_s[Y_AXIS] * 0.2, active_extruder);
|
||||
planner.synchronize();
|
||||
safe_delay(100);
|
||||
|
||||
current_position[X_AXIS] = grabxpos + SWITCHING_TOOLHEAD_X_SECURITY;
|
||||
|
||||
if (DEBUGGING(LEVELING)) DEBUG_POS("Move to new toolhead X + Security", current_position);
|
||||
|
||||
planner.buffer_line(current_position, planner.settings.max_feedrate_mm_s[X_AXIS] * 0.1, active_extruder);
|
||||
planner.synchronize();
|
||||
safe_delay(100);
|
||||
|
||||
current_position[Y_AXIS] += SWITCHING_TOOLHEAD_Y_CLEAR;
|
||||
|
||||
if (DEBUGGING(LEVELING)) DEBUG_POS("Move back Y clear", current_position);
|
||||
|
||||
planner.buffer_line(current_position, planner.settings.max_feedrate_mm_s[Y_AXIS], active_extruder); // move away from docked toolhead
|
||||
planner.synchronize();
|
||||
}
|
||||
|
||||
#endif // MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
inline void invalid_extruder_error(const uint8_t e) {
|
||||
SERIAL_ECHO_START();
|
||||
SERIAL_CHAR('T'); SERIAL_ECHO(int(e));
|
||||
@ -557,6 +684,11 @@ inline void invalid_extruder_error(const uint8_t e) {
|
||||
* previous tool out of the way and the new tool into place.
|
||||
*/
|
||||
void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool no_move/*=false*/) {
|
||||
|
||||
#if ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
if (tmp_extruder == active_extruder) return;
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIXING_EXTRUDER)
|
||||
|
||||
UNUSED(fr_mm_s); UNUSED(no_move);
|
||||
@ -686,6 +818,8 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
|
||||
magnetic_parking_extruder_tool_change(tmp_extruder);
|
||||
#elif ENABLED(SWITCHING_TOOLHEAD) // Switching Toolhead
|
||||
switching_toolhead_tool_change(tmp_extruder, fr_mm_s, no_move);
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) // Magnetic Switching Toolhead
|
||||
magnetic_switching_toolhead_tool_change(tmp_extruder, fr_mm_s, no_move);
|
||||
#elif ENABLED(SWITCHING_NOZZLE) && !SWITCHING_NOZZLE_TWO_SERVOS
|
||||
// Raise by a configured distance to avoid workpiece, except with
|
||||
// SWITCHING_NOZZLE_TWO_SERVOS, as both nozzles will lift instead.
|
||||
@ -755,7 +889,16 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
|
||||
#endif
|
||||
|
||||
// Prevent a move outside physical bounds
|
||||
apply_motion_limits(destination);
|
||||
#if ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
// If the original position is within tool store area, go to X origin at once
|
||||
if (destination[Y_AXIS] < SWITCHING_TOOLHEAD_Y_POS + SWITCHING_TOOLHEAD_Y_CLEAR) {
|
||||
current_position[X_AXIS] = 0;
|
||||
planner.buffer_line(current_position, planner.settings.max_feedrate_mm_s[X_AXIS], active_extruder);
|
||||
planner.synchronize();
|
||||
}
|
||||
#else
|
||||
apply_motion_limits(destination);
|
||||
#endif
|
||||
|
||||
// Move back to the original (or tweaked) position
|
||||
do_blocking_move_to(destination);
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -250,13 +250,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -257,13 +257,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -250,13 +250,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -258,13 +258,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -290,13 +290,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -252,13 +252,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -253,13 +253,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -254,13 +254,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -269,13 +269,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -254,13 +254,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -250,13 +250,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -250,13 +250,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -252,13 +252,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -280,13 +280,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -271,13 +271,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -251,13 +251,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -269,13 +269,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -268,13 +268,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -264,13 +264,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -254,13 +254,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -253,13 +253,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -254,13 +254,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
Loading…
Reference in New Issue
Block a user