CMS/Marlin
3
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Clean up whitespace, GTM32 pins

Browse Source
This commit is contained in:
Scott Lahteine 2019-11-29 20:05:32 -06:00
parent e585c37d7d
commit 2d74c2042a
4 changed files with 237 additions and 239 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Marlin/src/pins/stm32/pins_FYSETC_S6.h
View File

@ -39,7 +39,7 @@
// //
// EEPROM Emulation // EEPROM Emulation
// //
#define FLASH_EEPROM_EMULATION #define FLASH_EEPROM_EMULATION
//#define SRAM_EEPROM_EMULATION //#define SRAM_EEPROM_EMULATION
@ -202,7 +202,7 @@
#define DOGLCD_CS PC12 #define DOGLCD_CS PC12
#define DOGLCD_A0 PD0 #define DOGLCD_A0 PD0
#endif #endif
#endif #endif
#if ENABLED(NEWPANEL) #if ENABLED(NEWPANEL)

464
Marlin/src/pins/stm32/pins_GTM32_REV_B.h
View File

@ -1,232 +1,232 @@
/** /**
* Marlin 3D Printer Firmware * Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* *
* Based on Sprinter and grbl. * Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
* *
* This program is free software: you can redistribute it and/or modify * This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or * the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version. * (at your option) any later version.
* *
* This program is distributed in the hope that it will be useful, * This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of * but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details. * GNU General Public License for more details.
* *
* You should have received a copy of the GNU General Public License * You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once #pragma once
/** /**
* 24 May 2018 - @chepo for STM32F103VET6 * 24 May 2018 - @chepo for STM32F103VET6
* Schematic: https://github.com/chepo92/Smartto/blob/master/circuit_diagram/Rostock301/Hardware_GTM32_PRO_VB.pdf * Schematic: https://github.com/chepo92/Smartto/blob/master/circuit_diagram/Rostock301/Hardware_GTM32_PRO_VB.pdf
*/ */
#ifndef __STM32F1__ #ifndef __STM32F1__
#error "Oops! Select an STM32F1 board in 'Tools > Board.'" #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
#endif #endif
#define BOARD_NAME "GTM32 Pro VB" #define BOARD_NAME "GTM32 Pro VB"
#define DEFAULT_MACHINE_NAME "M201" #define DEFAULT_MACHINE_NAME "M201"
//#define DISABLE_DEBUG //#define DISABLE_DEBUG
// //
// It is required to disable JTAG function because its pins are // It is required to disable JTAG function because its pins are
// used as GPIO to drive the Y axis stepper. // used as GPIO to drive the Y axis stepper.
// DO NOT ENABLE! // DO NOT ENABLE!
// //
#define DISABLE_JTAG #define DISABLE_JTAG
// //
// If you don't need the SWDIO functionality (any more), you may // If you don't need the SWDIO functionality (any more), you may
// disable SWD here to regain PA13/PA14 pins for other use. // disable SWD here to regain PA13/PA14 pins for other use.
// //
//#define DISABLE_JTAGSWD //#define DISABLE_JTAGSWD
// Ignore temp readings during development. // Ignore temp readings during development.
//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 //#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000
// Enable EEPROM Emulation for this board as it doesn't have EEPROM // Enable EEPROM Emulation for this board as it doesn't have EEPROM
#define FLASH_EEPROM_EMULATION #define FLASH_EEPROM_EMULATION
#define E2END 0xFFF // 4KB #define E2END 0xFFF // 4KB
// //
// Limit Switches // Limit Switches
// //
#define X_MIN_PIN PE5 // ENDSTOPS 15,17 #define X_MIN_PIN PE5 // ENDSTOPS 15,17
#define X_MAX_PIN PE4 // ENDSTOPS 16,18 #define X_MAX_PIN PE4 // ENDSTOPS 16,18
#define Y_MIN_PIN PE3 // ENDSTOPS 9,11 #define Y_MIN_PIN PE3 // ENDSTOPS 9,11
#define Y_MAX_PIN PE2 // ENDSTOPS 10,12 #define Y_MAX_PIN PE2 // ENDSTOPS 10,12
#define Z_MIN_PIN PE1 // ENDSTOPS 3,5 #define Z_MIN_PIN PE1 // ENDSTOPS 3,5
#define Z_MAX_PIN PE0 // ENDSTOPS 4,6 #define Z_MAX_PIN PE0 // ENDSTOPS 4,6
// //
// Steppers // Steppers
// //
#define X_STEP_PIN PC6 #define X_STEP_PIN PC6
#define X_DIR_PIN PD13 #define X_DIR_PIN PD13
#define X_ENABLE_PIN PA8 #define X_ENABLE_PIN PA8
#define Y_STEP_PIN PA12 #define Y_STEP_PIN PA12
#define Y_DIR_PIN PA11 #define Y_DIR_PIN PA11
#define Y_ENABLE_PIN PA15 #define Y_ENABLE_PIN PA15
#define Z_STEP_PIN PD6 #define Z_STEP_PIN PD6
#define Z_DIR_PIN PD3 #define Z_DIR_PIN PD3
#define Z_ENABLE_PIN PB3 #define Z_ENABLE_PIN PB3
// Extruder stepper pins // Extruder stepper pins
// NOTE: Numbering here is made according to EXT connector numbers, // NOTE: Numbering here is made according to EXT connector numbers,
// the FANx_PWM line numbering in the schematics is reverse. // the FANx_PWM line numbering in the schematics is reverse.
// That is, E0_*_PIN are the E2_* lines connected to E2_A1 step // That is, E0_*_PIN are the E2_* lines connected to E2_A1 step
// stick that drives the EXT0 output on the board. // stick that drives the EXT0 output on the board.
// //
#define E0_STEP_PIN PC14 #define E0_STEP_PIN PC14
#define E0_DIR_PIN PC13 #define E0_DIR_PIN PC13
#define E0_ENABLE_PIN PC15 #define E0_ENABLE_PIN PC15
#define E1_STEP_PIN PA0 #define E1_STEP_PIN PA0
#define E1_DIR_PIN PB6 #define E1_DIR_PIN PB6
#define E1_ENABLE_PIN PA1 #define E1_ENABLE_PIN PA1
#define E2_STEP_PIN PB2 #define E2_STEP_PIN PB2
#define E2_DIR_PIN PB11 #define E2_DIR_PIN PB11
#define E2_ENABLE_PIN PC4 #define E2_ENABLE_PIN PC4
// //
// Heaters / Fans - INFO: Extruders ports are in reverse order. Pin numbers here differ from schematic. Original firmware assumes heater, fan and temp sensor on port EXT0 PB0, PB9, PC2. // Heaters / Fans - INFO: Extruders ports are in reverse order. Pin numbers here differ from schematic. Original firmware assumes heater, fan and temp sensor on port EXT0 PB0, PB9, PC2.
// //
#define HEATER_0_PIN PB0 // EXT0 port. #define HEATER_0_PIN PB0 // EXT0 port.
#define HEATER_1_PIN PB5 // EXT1 port #define HEATER_1_PIN PB5 // EXT1 port
#define HEATER_2_PIN PB4 // EXT2 port #define HEATER_2_PIN PB4 // EXT2 port
#define HEATER_BED_PIN PB1 // CON2X3 hotbed port #define HEATER_BED_PIN PB1 // CON2X3 hotbed port
// //
// These are FAN PWM pins on EXT0..EXT2 connectors. // These are FAN PWM pins on EXT0..EXT2 connectors.
// //
//#define FAN_PIN PB9 // EXT0 port //#define FAN_PIN PB9 // EXT0 port
#define FAN1_PIN PB8 // EXT1 port #define FAN1_PIN PB8 // EXT1 port
#define FAN2_PIN PB7 // EXT2 port #define FAN2_PIN PB7 // EXT2 port
#define ORIG_E0_AUTO_FAN_PIN PB9 // EXT0 port, used as main extruder fan #define ORIG_E0_AUTO_FAN_PIN PB9 // EXT0 port, used as main extruder fan
// //
// Temperature Sensors // Temperature Sensors
// //
#define TEMP_0_PIN PC2 // EXT0 port #define TEMP_0_PIN PC2 // EXT0 port
#define TEMP_1_PIN PC1 // EXT1 port #define TEMP_1_PIN PC1 // EXT1 port
#define TEMP_2_PIN PC0 // EXT2 port #define TEMP_2_PIN PC0 // EXT2 port
#define TEMP_BED_PIN PC3 // CON2X3 hotbed port #define TEMP_BED_PIN PC3 // CON2X3 hotbed port
// //
// Misc. Functions // Misc. Functions
// //
#define LED_PWM PD12 // External LED, pin 2 on LED labeled connector #define LED_PWM PD12 // External LED, pin 2 on LED labeled connector
// //
// LCD / Controller // LCD / Controller
// //
#if HAS_SPI_LCD #if HAS_SPI_LCD
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
// //
// LCD display on J2 FFC40 // LCD display on J2 FFC40
// Geeetech's LCD2004A Control Panel is very much like // Geeetech's LCD2004A Control Panel is very much like
// RepRapDiscount Smart Controller, but adds an FFC40 connector // RepRapDiscount Smart Controller, but adds an FFC40 connector
// connected with a flat wire to J2 connector on the board. // connected with a flat wire to J2 connector on the board.
// //
#define LCD_PINS_RS PE6 // CS chip select /SS chip slave select #define LCD_PINS_RS PE6 // CS chip select /SS chip slave select
#define LCD_PINS_ENABLE PE14 // SID (MOSI) #define LCD_PINS_ENABLE PE14 // SID (MOSI)
#define LCD_PINS_D4 PD8 // SCK (CLK) clock #define LCD_PINS_D4 PD8 // SCK (CLK) clock
#define LCD_PINS_D5 PD9 #define LCD_PINS_D5 PD9
#define LCD_PINS_D6 PD10 #define LCD_PINS_D6 PD10
#define LCD_PINS_D7 PE15 #define LCD_PINS_D7 PE15
#define BTN_EN1 PE8 #define BTN_EN1 PE8
#define BTN_EN2 PE9 #define BTN_EN2 PE9
#define BTN_ENC PE13 #define BTN_ENC PE13
//#define GTM32_PRO_VB_USE_LCD_BEEPER //#define GTM32_PRO_VB_USE_LCD_BEEPER
#define GTM32_PRO_VB_USE_EXT_SDCARD #define GTM32_PRO_VB_USE_EXT_SDCARD
#else #else
// //
// Serial LCDs can be implemented in ExtUI // Serial LCDs can be implemented in ExtUI
// //
//#define LCD_UART_TX PD8 //#define LCD_UART_TX PD8
//#define LCD_UART_RX PD9 //#define LCD_UART_RX PD9
#endif #endif
#if HAS_GRAPHICAL_LCD #if HAS_GRAPHICAL_LCD
#ifndef ST7920_DELAY_1 #ifndef ST7920_DELAY_1
#define ST7920_DELAY_1 DELAY_NS(96) #define ST7920_DELAY_1 DELAY_NS(96)
#endif #endif
#ifndef ST7920_DELAY_2 #ifndef ST7920_DELAY_2
#define ST7920_DELAY_2 DELAY_NS(48) #define ST7920_DELAY_2 DELAY_NS(48)
#endif #endif
#ifndef ST7920_DELAY_3 #ifndef ST7920_DELAY_3
#define ST7920_DELAY_3 DELAY_NS(715) #define ST7920_DELAY_3 DELAY_NS(715)
#endif #endif
#endif #endif
#endif // HAS_SPI_LCD #endif // HAS_SPI_LCD
// //
// Beeper // Beeper
// //
#ifdef GTM32_PRO_VB_USE_LCD_BEEPER #ifdef GTM32_PRO_VB_USE_LCD_BEEPER
// This is pin 32 on J2 FFC40 and pin, goes to the beeper // This is pin 32 on J2 FFC40 and pin, goes to the beeper
// on Geeetech's version of RepRapDiscount Smart Controller // on Geeetech's version of RepRapDiscount Smart Controller
// (e.g. on Rostock 301) // (e.g. on Rostock 301)
#define BEEPER_PIN PE12 #define BEEPER_PIN PE12
#else #else
// This is the beeper on the board itself // This is the beeper on the board itself
#define BEEPER_PIN PB10 #define BEEPER_PIN PB10
#endif #endif
/** /**
* The on-board TF_CARD_SOCKET microSD card socket has no SD Detect pin wired. * The on-board TF_CARD_SOCKET microSD card socket has no SD Detect pin wired.
* *
* The FFC10 (SD_CARD) connector has the same pins as those routed to the FFC40 (J2) * The FFC10 (SD_CARD) connector has the same pins as those routed to the FFC40 (J2)
* connector, which usually go to the SD Card slot on the Geeetech version of the * connector, which usually go to the SD Card slot on the Geeetech version of the
* RepRapDiscount Smart Controller. Both connectors have the card detect signal. * RepRapDiscount Smart Controller. Both connectors have the card detect signal.
* *
* The on-board SD card and the external card (on either SD_CARD or J2) are two * The on-board SD card and the external card (on either SD_CARD or J2) are two
* separate devices and can work simultaneously. Unfortunately, Marlin only supports * separate devices and can work simultaneously. Unfortunately, Marlin only supports
* a single SPI Flash device (as of 2019-07-05) so only one is enabled here. * a single SPI Flash device (as of 2019-07-05) so only one is enabled here.
*/ */
#if ENABLED(GTM32_PRO_VB_USE_EXT_SDCARD) #if ENABLED(GTM32_PRO_VB_USE_EXT_SDCARD)
// //
// SD Card on RepRapDiscount Smart Controller (J2) or on SD_CARD connector // SD Card on RepRapDiscount Smart Controller (J2) or on SD_CARD connector
// //
#define SS_PIN PB12 / PC11 #define SS_PIN PB12 // PC11
#define SCK_PIN PB13 // PC12 // PC1 #define SCK_PIN PB13 // PC12 // PC1
#define MOSI_PIN PB15 // PD2 // PD2 #define MOSI_PIN PB15 // PD2 // PD2
#define MISO_PIN PB14 // PC8 #define MISO_PIN PB14 // PC8
#define SD_DETECT_PIN PC7 #define SD_DETECT_PIN PC7
#else #else
// //
// Use the on-board card socket labeled TF_CARD_SOCKET // Use the on-board card socket labeled TF_CARD_SOCKET
// //
#define SS_PIN PA4 #define SS_PIN PA4
#define SCK_PIN PA5 #define SCK_PIN PA5
#define MOSI_PIN PA7 #define MOSI_PIN PA7
#define MISO_PIN PA6 // PA6 #define MISO_PIN PA6 // PA6
#define SD_DETECT_PIN -1 // Card detect is not connected #define SD_DETECT_PIN -1 // Card detect is not connected
#endif #endif
#define SDSS SS_PIN #define SDSS SS_PIN
// //
// ESP WiFi can be soldered to J9 connector which is wired to USART2. // ESP WiFi can be soldered to J9 connector which is wired to USART2.
// Must define WIFISUPPORT in Configuration.h for the printer. // Must define WIFISUPPORT in Configuration.h for the printer.
// //
#define ESP_WIFI_MODULE_COM 2 #define ESP_WIFI_MODULE_COM 2
#define ESP_WIFI_MODULE_BAUDRATE 115200 #define ESP_WIFI_MODULE_BAUDRATE 115200
#define ESP_WIFI_MODULE_RESET_PIN -1 #define ESP_WIFI_MODULE_RESET_PIN -1

4
buildroot/share/PlatformIO/scripts/fysetc_STM32S6.py
View File

@ -10,7 +10,7 @@ platform = env.PioPlatform()
board = env.BoardConfig() board = env.BoardConfig()
FRAMEWORK_DIR = platform.get_package_dir("framework-arduinoststm32") FRAMEWORK_DIR = platform.get_package_dir("framework-arduinoststm32")
#FRAMEWORK_DIR = platform.get_package_dir("framework-arduinoststm32@3.10500.190327") #FRAMEWORK_DIR = platform.get_package_dir("framework-arduinoststm32@3.10500.190327")
CMSIS_DIR = os.path.join(FRAMEWORK_DIR, "CMSIS", "CMSIS") CMSIS_DIR = os.path.join(FRAMEWORK_DIR, "CMSIS", "CMSIS")
assert os.path.isdir(FRAMEWORK_DIR) assert os.path.isdir(FRAMEWORK_DIR)
assert os.path.isdir(CMSIS_DIR) assert os.path.isdir(CMSIS_DIR)
@ -31,7 +31,7 @@ for file_name in os.listdir(source_dir):
full_file_name = os.path.join(source_dir, file_name) full_file_name = os.path.join(source_dir, file_name)
if os.path.isfile(full_file_name): if os.path.isfile(full_file_name):
shutil.copy(full_file_name, variant_dir) shutil.copy(full_file_name, variant_dir)
# Relocate firmware from 0x08000000 to 0x08002000 # Relocate firmware from 0x08000000 to 0x08002000
#env['CPPDEFINES'].remove(("VECT_TAB_ADDR", 134217728)) #env['CPPDEFINES'].remove(("VECT_TAB_ADDR", 134217728))
#env['CPPDEFINES'].append(("VECT_TAB_ADDR", "0x08010000")) #env['CPPDEFINES'].append(("VECT_TAB_ADDR", "0x08010000"))

4
buildroot/share/PlatformIO/variants/FYSETC_S6/ldscript.ld
View File

@ -133,7 +133,7 @@ SECTIONS
_sidata = LOADADDR(.data); _sidata = LOADADDR(.data);
/* Initialized data sections goes into RAM, load LMA copy after code */ /* Initialized data sections goes into RAM, load LMA copy after code */
.data : .data :
{ {
. = ALIGN(4); . = ALIGN(4);
_sdata = .; /* create a global symbol at data start */ _sdata = .; /* create a global symbol at data start */
@ -173,8 +173,6 @@ SECTIONS
. = ALIGN(4); . = ALIGN(4);
} >RAM } >RAM
/* Remove information from the standard libraries */ /* Remove information from the standard libraries */
/DISCARD/ : /DISCARD/ :
{ {