diff --git a/Marlin/src/HAL/STM32F1/inc/Conditionals_LCD.h b/Marlin/src/HAL/STM32F1/inc/Conditionals_LCD.h
index 0a1d6c820..09d79030b 100644
--- a/Marlin/src/HAL/STM32F1/inc/Conditionals_LCD.h
+++ b/Marlin/src/HAL/STM32F1/inc/Conditionals_LCD.h
@@ -26,12 +26,8 @@
#undef SD_CHECK_AND_RETRY
#endif
-#if HAS_SPI_TFT
- #error "Sorry! SPI TFT displays are not available for HAL/STM32F1 (yet)."
-#endif
-
// This platform has 'touch/xpt2046', not 'tft/xpt2046'
-#if ENABLED(TOUCH_SCREEN) && !HAS_FSMC_TFT
+#if ENABLED(TOUCH_SCREEN) && !HAS_FSMC_TFT && !HAS_SPI_TFT
#undef TOUCH_SCREEN
#undef TOUCH_SCREEN_CALIBRATION
#define HAS_TOUCH_XPT2046 1
diff --git a/Marlin/src/HAL/STM32F1/tft/tft_spi.cpp b/Marlin/src/HAL/STM32F1/tft/tft_spi.cpp
new file mode 100644
index 000000000..a64f90f2b
--- /dev/null
+++ b/Marlin/src/HAL/STM32F1/tft/tft_spi.cpp
@@ -0,0 +1,144 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+#include "../../../inc/MarlinConfig.h"
+
+#if HAS_SPI_TFT
+
+#include "tft_spi.h"
+
+// TFT_SPI tft;
+
+SPIClass TFT_SPI::SPIx(1);
+
+#define SPI_TFT_CS_H OUT_WRITE(TFT_CS_PIN, HIGH)
+#define SPI_TFT_CS_L OUT_WRITE(TFT_CS_PIN, LOW)
+
+#define SPI_TFT_DC_H OUT_WRITE(TFT_DC_PIN, HIGH)
+#define SPI_TFT_DC_L OUT_WRITE(TFT_DC_PIN, LOW)
+
+#define SPI_TFT_RST_H OUT_WRITE(TFT_RST_PIN, HIGH)
+#define SPI_TFT_RST_L OUT_WRITE(TFT_RST_PIN, LOW)
+
+#define SPI_TFT_BLK_H OUT_WRITE(TFT_BACKLIGHT_PIN, HIGH)
+#define SPI_TFT_BLK_L OUT_WRITE(TFT_BACKLIGHT_PIN, LOW)
+
+void TFT_SPI::Init() {
+ #if PIN_EXISTS(TFT_RESET)
+ // OUT_WRITE(TFT_RESET_PIN, HIGH);
+ SPI_TFT_RST_H;
+ delay(100);
+ #endif
+
+ #if PIN_EXISTS(TFT_BACKLIGHT)
+ // OUT_WRITE(TFT_BACKLIGHT_PIN, HIGH);
+ SPI_TFT_BLK_H;
+ #endif
+
+ SPI_TFT_DC_H;
+ SPI_TFT_CS_H;
+
+ /**
+ * STM32F1 APB2 = 72MHz, APB1 = 36MHz, max SPI speed of this MCU if 18Mhz
+ * STM32F1 has 3 SPI ports, SPI1 in APB2, SPI2/SPI3 in APB1
+ * so the minimum prescale of SPI1 is DIV4, SPI2/SPI3 is DIV2
+ */
+ #if SPI_DEVICE == 1
+ #define SPI_CLOCK_MAX SPI_CLOCK_DIV4
+ #else
+ #define SPI_CLOCK_MAX SPI_CLOCK_DIV2
+ #endif
+ uint8_t clock;
+ uint8_t spiRate = SPI_FULL_SPEED;
+ switch (spiRate) {
+ case SPI_FULL_SPEED: clock = SPI_CLOCK_MAX ; break;
+ case SPI_HALF_SPEED: clock = SPI_CLOCK_DIV4 ; break;
+ case SPI_QUARTER_SPEED: clock = SPI_CLOCK_DIV8 ; break;
+ case SPI_EIGHTH_SPEED: clock = SPI_CLOCK_DIV16; break;
+ case SPI_SPEED_5: clock = SPI_CLOCK_DIV32; break;
+ case SPI_SPEED_6: clock = SPI_CLOCK_DIV64; break;
+ default: clock = SPI_CLOCK_DIV2; // Default from the SPI library
+ }
+ SPIx.setModule(1);
+ SPIx.setClockDivider(clock);
+ SPIx.setBitOrder(MSBFIRST);
+ SPIx.setDataMode(SPI_MODE0);
+}
+
+void TFT_SPI::DataTransferBegin(uint16_t DataSize) {
+ SPIx.setDataSize(DataSize);
+ SPIx.begin();
+ SPI_TFT_CS_L;
+}
+
+uint32_t TFT_SPI::GetID() {
+ uint32_t id;
+ id = ReadID(LCD_READ_ID);
+
+ if ((id & 0xFFFF) == 0 || (id & 0xFFFF) == 0xFFFF)
+ id = ReadID(LCD_READ_ID4);
+ return id;
+}
+
+uint32_t TFT_SPI::ReadID(uint16_t Reg) {
+ #if !PIN_EXISTS(TFT_MISO)
+ return 0;
+ #else
+ uint16_t d = 0;
+ DataTransferBegin(DATASIZE_8BIT);
+ WriteReg(Reg);
+
+ SPI.read((uint8_t*)&d, 1); //dummy read
+ SPI.read((uint8_t*)&d, 1);
+
+ DataTransferEnd();
+
+ return d >> 7;
+ #endif
+}
+
+bool TFT_SPI::isBusy() {
+ return false;
+}
+
+void TFT_SPI::Abort() {
+ DataTransferEnd();
+}
+
+void TFT_SPI::Transmit(uint16_t Data) {
+ SPIx.send(Data);
+}
+
+void TFT_SPI::TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count) {
+ DataTransferBegin();
+ SPI_TFT_DC_H;
+ if (MemoryIncrease == DMA_MINC_ENABLE) {
+ SPIx.dmaSend(Data, Count, true);
+ }
+ else {
+ SPIx.dmaSend(Data, Count, false);
+ }
+
+ DataTransferEnd();
+}
+
+#endif // HAS_SPI_TFT
diff --git a/Marlin/src/HAL/STM32F1/tft/tft_spi.h b/Marlin/src/HAL/STM32F1/tft/tft_spi.h
new file mode 100644
index 000000000..1d1c9b444
--- /dev/null
+++ b/Marlin/src/HAL/STM32F1/tft/tft_spi.h
@@ -0,0 +1,65 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+#include "../../../inc/MarlinConfig.h"
+
+#include
+
+#ifndef LCD_READ_ID
+ #define LCD_READ_ID 0x04 // Read display identification information (0xD3 on ILI9341)
+#endif
+#ifndef LCD_READ_ID4
+ #define LCD_READ_ID4 0xD3 // Read display identification information (0xD3 on ILI9341)
+#endif
+
+#define DATASIZE_8BIT DATA_SIZE_8BIT
+#define DATASIZE_16BIT DATA_SIZE_16BIT
+#define TFT_IO TFT_SPI
+
+#define DMA_MINC_ENABLE 1
+#define DMA_MINC_DISABLE 0
+
+class TFT_SPI {
+private:
+ static uint32_t ReadID(uint16_t Reg);
+ static void Transmit(uint16_t Data);
+ static void TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count);
+
+public:
+ static SPIClass SPIx;
+
+ static void Init();
+ static uint32_t GetID();
+ static bool isBusy();
+ static void Abort();
+
+ static void DataTransferBegin(uint16_t DataWidth = DATA_SIZE_16BIT);
+ static void DataTransferEnd() { WRITE(TFT_CS_PIN, HIGH); SPIx.end(); };
+ static void DataTransferAbort();
+
+ static void WriteData(uint16_t Data) { Transmit(Data); }
+ static void WriteReg(uint16_t Reg) { WRITE(TFT_A0_PIN, LOW); Transmit(Reg); WRITE(TFT_A0_PIN, HIGH); }
+
+ static void WriteSequence(uint16_t *Data, uint16_t Count) { TransmitDMA(DMA_MINC_ENABLE, Data, Count); }
+ static void WriteMultiple(uint16_t Color, uint16_t Count) { static uint16_t Data; Data = Color; TransmitDMA(DMA_MINC_DISABLE, &Data, Count); }
+};
diff --git a/Marlin/src/HAL/STM32F1/tft/xpt2046.cpp b/Marlin/src/HAL/STM32F1/tft/xpt2046.cpp
index dc34b0d5b..e06cace74 100644
--- a/Marlin/src/HAL/STM32F1/tft/xpt2046.cpp
+++ b/Marlin/src/HAL/STM32F1/tft/xpt2046.cpp
@@ -65,9 +65,7 @@ void XPT2046::Init() {
SET_INPUT(TOUCH_INT_PIN);
#endif
- #if ENABLED(TOUCH_BUTTONS_HW_SPI)
- touch_spi_init(SPI_SPEED_6);
- #endif
+ TERN_(TOUCH_BUTTONS_HW_SPI, touch_spi_init(SPI_SPEED_6));
// Read once to enable pendrive status pin
getRawData(XPT2046_X);
@@ -95,12 +93,14 @@ uint16_t XPT2046::getRawData(const XPTCoordinate coordinate) {
uint16_t data[3];
DataTransferBegin();
+ TERN_(TOUCH_BUTTONS_HW_SPI, SPIx.begin());
for (uint16_t i = 0; i < 3 ; i++) {
IO(coordinate);
data[i] = (IO() << 4) | (IO() >> 4);
}
+ TERN_(TOUCH_BUTTONS_HW_SPI, SPIx.end());
DataTransferEnd();
uint16_t delta01 = delta(data[0], data[1]),
@@ -114,14 +114,12 @@ uint16_t XPT2046::getRawData(const XPTCoordinate coordinate) {
}
uint16_t XPT2046::IO(uint16_t data) {
- TERN(TOUCH_BUTTONS_HW_SPI, HardwareIO, SoftwareIO)(data);
+ return TERN(TOUCH_BUTTONS_HW_SPI, HardwareIO, SoftwareIO)(data);
}
#if ENABLED(TOUCH_BUTTONS_HW_SPI)
uint16_t XPT2046::HardwareIO(uint16_t data) {
- SPIx.begin();
uint16_t result = SPIx.transfer(data);
- SPIx.end();
return result;
}
#endif
diff --git a/Marlin/src/lcd/tft/ili9488.h b/Marlin/src/lcd/tft/ili9488.h
index 135f94a57..6aad70486 100644
--- a/Marlin/src/lcd/tft/ili9488.h
+++ b/Marlin/src/lcd/tft/ili9488.h
@@ -39,7 +39,9 @@
#define ILI9488_ORIENTATION_DOWN ILI9488_MADCTL_MX // 320x480 ; Cable on the upper side
#define ILI9488_COLOR_BGR
-#define ILI9488_ORIENTATION ILI9488_ORIENTATION_LEFT
+#ifndef ILI9488_ORIENTATION
+ #define ILI9488_ORIENTATION ILI9488_ORIENTATION_LEFT
+#endif
#define ILI9488_MADCTL_DATA (ILI9488_ORIENTATION | TERN(ILI9488_COLOR_BGR, ILI9488_MADCTL_BGR, ILI9488_MADCTL_RGB))
#define ILI9488_NOP 0x00 // No Operation
diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h
index d314c30fc..afa9354aa 100644
--- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h
+++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h
@@ -225,10 +225,10 @@
#define FSMC_DMA_DEV DMA2
#define FSMC_DMA_CHANNEL DMA_CH5
- #define XPT2046_X_CALIBRATION -17181
- #define XPT2046_Y_CALIBRATION 11434
- #define XPT2046_X_OFFSET 501
- #define XPT2046_Y_OFFSET -9
+ #define XPT2046_X_CALIBRATION 17880
+ #define XPT2046_Y_CALIBRATION -12234
+ #define XPT2046_X_OFFSET -45
+ #define XPT2046_Y_OFFSET 349
#define TOUCH_CS_PIN PA7 // SPI2_NSS
#define TOUCH_SCK_PIN PB13 // SPI2_SCK
@@ -237,6 +237,7 @@
#define TFT_DRIVER ILI9488
#define TFT_BUFFER_SIZE 14400
+ #define ILI9488_ORIENTATION ILI9488_MADCTL_MX | ILI9488_MADCTL_MV
#endif
#define SPI_FLASH
diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h
index 9f4e57dd7..4552f8cd9 100644
--- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h
+++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h
@@ -344,6 +344,37 @@
#define MKS_LCD12864B
#undef SHOW_BOOTSCREEN
+ #elif ENABLED(TFT_480x320_SPI)
+ #define TFT_CS_PIN PD11
+ #define TFT_SCK_PIN PA5
+ #define TFT_MISO_PIN PA6
+ #define TFT_MOSI_PIN PA7
+ #define TFT_DC_PIN PD10
+ #define TFT_RST_PIN PC6
+ #define TFT_A0_PIN TFT_DC_PIN
+
+ #define TFT_RESET_PIN PC6
+ #define TFT_BACKLIGHT_PIN PD13
+
+ #define XPT2046_X_CALIBRATION -17253
+ #define XPT2046_Y_CALIBRATION 11579
+ #define XPT2046_X_OFFSET 514
+ #define XPT2046_Y_OFFSET -24
+
+ #define TOUCH_CS_PIN PE14 // SPI1_NSS
+ #define TOUCH_SCK_PIN PA5 // SPI1_SCK
+ #define TOUCH_MISO_PIN PA6 // SPI1_MISO
+ #define TOUCH_MOSI_PIN PA7 // SPI1_MOSI
+
+ #define TFT_DRIVER ST7796
+ #define TFT_BUFFER_SIZE 14400
+
+ #define LCD_READ_ID 0xD3
+ #define LCD_USE_DMA_SPI
+
+ #define TOUCH_BUTTONS_HW_SPI
+ #define TOUCH_BUTTONS_HW_SPI_DEVICE 1
+
#else // !MKS_MINI_12864
#define LCD_PINS_D4 PE14