Update Ender-2 BED_MAXTEMP (#12042)

Also added details to the README to make sure the Ender-2 status is properly documented.
This commit is contained in:
Emilio Moretti 2018-10-08 21:57:44 -03:00 committed by Scott Lahteine
parent 7f94ca950e
commit 2ef7175b42
2 changed files with 16 additions and 1 deletions

View File

@ -390,7 +390,7 @@
#define HEATER_3_MAXTEMP 275
#define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 125
#define BED_MAXTEMP 75
//===========================================================================
//============================= PID Settings ================================

View File

@ -16,3 +16,18 @@ For U8Glib, at least version 1.14 and at most 1.17 is used, because
## Bitmaps
The bootscreen and custom status screens come from Creality's firmware.
## Creality Ender-2 firmware status
The firmware source code has been published on 2018/07/10.
It is based on Marlin 1.1. The source code and .hex binaries for all printers (including Ender-2) can be obtained from:
https://www.creality3d.cn/download/firmware_c0001
And repositories for CR-10S and Ender-3 can be found here:
https://github.com/Creality3DPrinting
The configuration files have been verified to match the original configuration, but further investigation is needed to ensure there aren't any extra changes in the source code.
## Ender-2 specific changelog:
* 2018/10/08 - Updated BED_MAXTEMP to 75 to match the original Creality Ender-2 Firmware (which is now open source)