From 2fa514e88a0da8b470c5a01e210cd4732974fadf Mon Sep 17 00:00:00 2001 From: Cameron Lai Date: Thu, 24 Apr 2014 12:55:00 +0800 Subject: [PATCH] Add port for 5DPrint D8 Driver board --- Marlin/pins.h | 82 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 82 insertions(+) diff --git a/Marlin/pins.h b/Marlin/pins.h index 7fa0ee47b..3e5fa79c6 100644 --- a/Marlin/pins.h +++ b/Marlin/pins.h @@ -1,6 +1,7 @@ #ifndef PINS_H #define PINS_H +#if MOTHERBOARD != 88 #define X_MS1_PIN -1 #define X_MS2_PIN -1 #define Y_MS1_PIN -1 @@ -12,6 +13,87 @@ #define E1_MS1_PIN -1 #define E1_MS2_PIN -1 #define DIGIPOTSS_PIN -1 +#endif + +/**************************************************************************************** +* 5DPrint D8 Driver board +* https://bitbucket.org/makible/5dprint-d8-controller-board +****************************************************************************************/ + +#if MOTHERBOARD == 88 + +#define KNOWN_BOARD 1 +#define AT90USB 1286 // Disable MarlinSerial etc. + +#ifndef __AVR_AT90USB1286__ +#error Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu. +#endif + +#define LARGE_FLASH true + +#define X_STEP_PIN 0 +#define X_DIR_PIN 1 +#define X_ENABLE_PIN 23 +#define X_STOP_PIN 37 + +#define Y_STEP_PIN 2 +#define Y_DIR_PIN 3 +#define Y_ENABLE_PIN 19 +#define Y_STOP_PIN 36 + +#define Z_STEP_PIN 4 +#define Z_DIR_PIN 5 +#define Z_ENABLE_PIN 18 +#define Z_STOP_PIN 39 + +#define E0_STEP_PIN 6 +#define E0_DIR_PIN 7 +#define E0_ENABLE_PIN 17 + +#define HEATER_0_PIN 21 // Extruder +#define HEATER_1_PIN -1 +#define HEATER_2_PIN -1 +#define HEATER_BED_PIN 20 // Bed +#define FAN_PIN 22 // Fan +// You may need to change FAN_PIN to 16 because Marlin isn't using fastio.h +// for the fan and Teensyduino uses a different pin mapping. + +#define TEMP_0_PIN 1 // Extruder / Analog pin numbering +#define TEMP_BED_PIN 0 // Bed / Analog pin numbering + +#define TEMP_1_PIN -1 +#define TEMP_2_PIN -1 + +#define SDPOWER -1 +#define SDSS 8 +#define LED_PIN -1 +#define PS_ON_PIN -1 +#define KILL_PIN -1 +#define ALARM_PIN -1 + +#ifndef SDSUPPORT +// these pins are defined in the SD library if building with SD support + #define SCK_PIN 9 + #define MISO_PIN 11 + #define MOSI_PIN 10 +#endif + +// Microstepping pins +#define X_MS1_PIN 13 +#define X_MS2_PIN 14 +#define Y_MS1_PIN 33 +#define Y_MS2_PIN 32 +#define Z_MS1_PIN 31 +#define Z_MS2_PIN 30 +#define E0_MS1_PIN 29 +#define E0_MS2_PIN 28 + +#endif /* 88 */ + +/**************************************************************************************** +* +* +****************************************************************************************/ #if MOTHERBOARD == 99 #define KNOWN_BOARD 1