CMS/Marlin
3
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Fix Anycubic Chiron "Ready" detection (#19880)

Browse Source 
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
This commit is contained in:
Nick 2020-10-24 22:48:29 +01:00 committed by GitHub
parent b632b52b11
commit 311b65b225
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
2 changed files with 63 additions and 77 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

138
Marlin/src/lcd/extui/lib/anycubic_chiron/chiron_tft.cpp
View File

@ -40,6 +40,7 @@
#include "../../../../sd/cardreader.h"
#include "../../../../libs/numtostr.h"
#include "../../../../MarlinCore.h"
namespace Anycubic {
printer_state_t ChironTFT::printer_state;
@ -87,7 +88,7 @@ namespace Anycubic {
// Enable levelling and Disable end stops during print
// as Z home places nozzle above the bed so we need to allow it past the end stops
injectCommands_P(AC_cmnd_enable_levelling); //M211 S0\n"));
injectCommands_P(AC_cmnd_enable_levelling);
// Startup tunes are defined in Tunes.h
//PlayTune(BEEPER_PIN, Anycubic_PowerOn, 1);
@ -179,7 +180,7 @@ namespace Anycubic {
#endif
switch (printer_state) {
case AC_printer_pausing: {
if ( (strcmp_P(msg, MARLIN_msg_print_paused) == 0 ) || (strcmp_P(msg, MARLIN_msg_nozzle_parked) == 0 ) ) {
if (strcmp_P(msg, MARLIN_msg_print_paused) == 0 || strcmp_P(msg, MARLIN_msg_nozzle_parked) == 0) {
SendtoTFTLN(AC_msg_paused); // enable continue button
printer_state = AC_printer_paused;
}
@ -189,18 +190,18 @@ namespace Anycubic {
case AC_printer_printing:
case AC_printer_paused: {
// Heater timout, send acknowledgement
if (strcmp_P(msg, MARLIN_msg_heater_timeout) == 0 ) {
if (strcmp_P(msg, MARLIN_msg_heater_timeout) == 0) {
pause_state = AC_paused_heater_timed_out;
SendtoTFTLN(AC_msg_paused); // enable continue button
PlayTune(BEEPER_PIN,Heater_Timedout,1);
}
// Reheat finished, send acknowledgement
else if (strcmp_P(msg, MARLIN_msg_reheat_done) == 0 ) {
else if (strcmp_P(msg, MARLIN_msg_reheat_done) == 0) {
pause_state = AC_paused_idle;
SendtoTFTLN(AC_msg_paused); // enable continue button
}
// Filament Purging, send acknowledgement enter run mode
else if (strcmp_P(msg, MARLIN_msg_filament_purging) == 0 ) {
else if (strcmp_P(msg, MARLIN_msg_filament_purging) == 0) {
pause_state = AC_paused_purging_filament;
SendtoTFTLN(AC_msg_paused); // enable continue button
}
@ -221,14 +222,15 @@ namespace Anycubic {
switch (printer_state) {
case AC_printer_probing: {
// If probing completes ok save the mesh and park
if (strcmp_P(msg, MARLIN_msg_ready) == 0 ) {
// Ignore the custom machine name
if (strcmp_P(msg + strlen(CUSTOM_MACHINE_NAME), MARLIN_msg_ready) == 0) {
injectCommands_P(PSTR("M500\nG27"));
SendtoTFTLN(AC_msg_probing_complete);
printer_state = AC_printer_idle;
msg_matched = true;
}
// If probing fails dont save the mesh raise the probe above the bad point
if (strcmp_P(msg, MARLIN_msg_probing_failed) == 0 ) {
if (strcmp_P(msg, MARLIN_msg_probing_failed) == 0) {
PlayTune(BEEPER_PIN, BeepBeepBeeep, 1);
injectCommands_P(PSTR("G1 Z50 F500"));
SendtoTFTLN(AC_msg_probing_complete);
@ -238,14 +240,14 @@ namespace Anycubic {
} break;
case AC_printer_printing: {
if (strcmp_P(msg, MARLIN_msg_reheating) == 0 ) {
if (strcmp_P(msg, MARLIN_msg_reheating) == 0) {
SendtoTFTLN(AC_msg_paused); // enable continue button
msg_matched = true;
}
} break;
case AC_printer_pausing: {
if (strcmp_P(msg, MARLIN_msg_print_paused) == 0 ) {
if (strcmp_P(msg, MARLIN_msg_print_paused) == 0) {
SendtoTFTLN(AC_msg_paused);
printer_state = AC_printer_paused;
pause_state = AC_paused_idle;
@ -254,7 +256,7 @@ namespace Anycubic {
} break;
case AC_printer_stopping: {
if (strcmp_P(msg, MARLIN_msg_print_aborted) == 0 ) {
if (strcmp_P(msg, MARLIN_msg_print_aborted) == 0) {
SendtoTFTLN(AC_msg_stop);
printer_state = AC_printer_idle;
msg_matched = true;
@ -289,7 +291,7 @@ namespace Anycubic {
serialprintPGM(str);
#endif
while (const char c = pgm_read_byte(str++)) TFTSer.print(c);
}
}
void ChironTFT::SendtoTFTLN(PGM_P str = nullptr) {
if (str != nullptr) {
@ -300,22 +302,22 @@ namespace Anycubic {
#if ACDEBUG(AC_SOME)
SERIAL_EOL();
#endif
}
TFTSer.println("");
}
TFTSer.println("");
}
bool ChironTFT::ReadTFTCommand() {
bool command_ready = false;
while( (TFTSer.available() > 0) && (command_len < MAX_CMND_LEN) ) {
while(TFTSer.available() > 0 && command_len < MAX_CMND_LEN) {
panel_command[command_len] = TFTSer.read();
if(panel_command[command_len] == '\n') {
if (panel_command[command_len] == '\n') {
command_ready = true;
break;
}
command_len++;
}
if(command_ready) {
if (command_ready) {
panel_command[command_len] = 0x00;
#if ACDEBUG(AC_ALL)
SERIAL_ECHOLNPAIR("< ", panel_command);
@ -333,56 +335,45 @@ namespace Anycubic {
}
int8_t ChironTFT::Findcmndpos(const char * buff, char q) {
bool found = false;
int8_t pos = 0;
do {
if (buff[pos] == q) {
found = true;
break;
}
pos ++;
} while(pos < MAX_CMND_LEN);
if (found) return pos;
do { if (buff[pos] == q) return pos; } while(++pos < MAX_CMND_LEN);
return -1;
}
void ChironTFT::CheckHeaters() {
uint8_t faultDuration = 0; float temp = 0;
uint8_t faultDuration = 0;
float temp = 0;
// if the hotend temp is abnormal, confirm state before signalling panel
temp = getActualTemp_celsius(E0);
if ( (temp <= HEATER_0_MINTEMP) || (temp >= HEATER_0_MAXTEMP) ) {
do {
faultDuration ++;
if (faultDuration >= AC_HEATER_FAULT_VALIDATION_TIME) {
SendtoTFTLN(AC_msg_nozzle_temp_abnormal);
SERIAL_ECHOLNPAIR("Extruder temp abnormal! : ", temp);
break;
}
delay_ms(500);
temp = getActualTemp_celsius(E0);
} while ((temp <= HEATER_0_MINTEMP) || (temp >= HEATER_0_MAXTEMP) );
while (!WITHIN(temp, HEATER_0_MINTEMP, HEATER_0_MAXTEMP)) {
faultDuration++;
if (faultDuration >= AC_HEATER_FAULT_VALIDATION_TIME) {
SendtoTFTLN(AC_msg_nozzle_temp_abnormal);
SERIAL_ECHOLNPAIR("Extruder temp abnormal! : ", temp);
break;
}
delay_ms(500);
temp = getActualTemp_celsius(E0);
}
// if the hotbed temp is abnormal, confirm state before signalling panel
// If the hotbed temp is abnormal, confirm state before signaling panel
faultDuration = 0;
temp = getActualTemp_celsius(BED);
if ( (temp <= BED_MINTEMP) || (temp >= BED_MAXTEMP) ) {
do {
faultDuration ++;
if (faultDuration >= AC_HEATER_FAULT_VALIDATION_TIME) {
SendtoTFTLN(AC_msg_nozzle_temp_abnormal);
SERIAL_ECHOLNPAIR_P("Bed temp abnormal! : ", temp);
while (!WITHIN(temp, BED_MINTEMP, BED_MAXTEMP)) {
faultDuration++;
if (faultDuration >= AC_HEATER_FAULT_VALIDATION_TIME) {
SendtoTFTLN(AC_msg_nozzle_temp_abnormal);
SERIAL_ECHOLNPAIR_P("Bed temp abnormal! : ", temp);
break;
}
delay_ms(500);
temp = getActualTemp_celsius(E0);
} while ((temp <= BED_MINTEMP) || (temp >= BED_MAXTEMP) );
}
delay_ms(500);
temp = getActualTemp_celsius(E0);
}
// Update panel with hotend heater status
if (hotend_state != AC_heater_temp_reached) {
if ( WITHIN( getActualTemp_celsius(E0) - getTargetTemp_celsius(E0), -1, 1 ) ) {
if (WITHIN(getActualTemp_celsius(E0) - getTargetTemp_celsius(E0), -1, 1)) {
SendtoTFTLN(AC_msg_nozzle_heating_done);
hotend_state = AC_heater_temp_reached;
}
@ -390,7 +381,7 @@ namespace Anycubic {
// Update panel with bed heater status
if (hotbed_state != AC_heater_temp_reached) {
if ( WITHIN( getActualTemp_celsius(BED) - getTargetTemp_celsius(BED), -0.5, 0.5 ) ) {
if (WITHIN(getActualTemp_celsius(BED) - getTargetTemp_celsius(BED), -0.5, 0.5)) {
SendtoTFTLN(AC_msg_bed_heating_done);
hotbed_state = AC_heater_temp_reached;
}
@ -398,7 +389,7 @@ namespace Anycubic {
}
void ChironTFT::SendFileList(int8_t startindex) {
// respond to panel request for 4 files starting at index
// Respond to panel request for 4 files starting at index
#if ACDEBUG(AC_INFO)
SERIAL_ECHOLNPAIR("## SendFileList ## ", startindex);
#endif
@ -408,8 +399,8 @@ namespace Anycubic {
}
void ChironTFT::SelectFile() {
strncpy(selectedfile,panel_command+4,command_len-4);
selectedfile[command_len-5] = '\0';
strncpy(selectedfile, panel_command + 4, command_len - 4);
selectedfile[command_len - 5] = '\0';
#if ACDEBUG(AC_FILE)
SERIAL_ECHOLNPAIR_F(" Selected File: ",selectedfile);
#endif
@ -493,7 +484,6 @@ namespace Anycubic {
if (isPrintingFromMedia()) {
SendtoTFT(PSTR("A6V "));
TFTSer.println(ui8tostr2(getProgress_percent()));
}
else
SendtoTFTLN(PSTR("A6V ---"));
@ -552,7 +542,7 @@ namespace Anycubic {
}
else {
if (printer_state == AC_printer_resuming_from_power_outage)
injectCommands_P(PSTR("M1000 C\n")); // Cancel recovery
injectCommands_P(PSTR("M1000 C")); // Cancel recovery
SendtoTFTLN(AC_msg_stop);
printer_state = AC_printer_idle;
}
@ -569,7 +559,7 @@ namespace Anycubic {
case 14: { // A14 Start Printing
// Allows printer to restart the job if we dont want to recover
if (printer_state == AC_printer_resuming_from_power_outage) {
injectCommands_P(PSTR("M1000 C\n")); // Cancel recovery
injectCommands_P(PSTR("M1000 C")); // Cancel recovery
printer_state = AC_printer_idle;
}
#if ACDebugLevel >= 1
@ -587,8 +577,7 @@ namespace Anycubic {
if (printer_state == AC_printer_resuming_from_power_outage)
// Need to home here to restore the Z position
injectCommands_P(AC_cmnd_power_loss_recovery);
injectCommands_P(PSTR("M1000\n")); // home and start recovery
injectCommands_P(PSTR("M1000")); // home and start recovery
break;
case 16: { // A16 Set HotEnd temp A17 S170
@ -631,10 +620,10 @@ namespace Anycubic {
case 21: // A21 Home Axis A21 X
if (!isPrinting()) {
switch ((char)panel_command[4]) {
case 'X': injectCommands_P(PSTR("G28 X\n")); break;
case 'Y': injectCommands_P(PSTR("G28 Y\n")); break;
case 'Z': injectCommands_P(PSTR("G28 Z\n")); break;
case 'C': injectCommands_P(PSTR("G28\n")); break;
case 'X': injectCommands_P(PSTR("G28 X")); break;
case 'Y': injectCommands_P(PSTR("G28 Y")); break;
case 'Z': injectCommands_P(PSTR("G28 Z")); break;
case 'C': injectCommands_P(PSTR("G28")); break;
}
}
break;
@ -729,7 +718,7 @@ namespace Anycubic {
// If the same meshpoint is selected twice in a row, move the head to that ready for adjustment
if ((selectedmeshpoint.x == pos.x) && (selectedmeshpoint.y == pos.y)) {
if (!isPositionKnown())
injectCommands_P(PSTR("G28\n")); // home
injectCommands_P(PSTR("G28")); // home
if (isPositionKnown()) {
#if ACDEBUG(AC_INFO)
@ -769,17 +758,15 @@ namespace Anycubic {
switch (panel_command[3]) {
case 'C': // Restore and apply original offsets
if (!isPrinting()) {
injectCommands_P(PSTR("M501\nM420 S1\n"));
selectedmeshpoint.x = 99;
selectedmeshpoint.y = 99;
injectCommands_P(PSTR("M501\nM420 S1"));
selectedmeshpoint.x = selectedmeshpoint.y = 99;
}
break;
case 'D': // Save Z Offset tables and restore levelling state
if (!isPrinting()) {
setAxisPosition_mm(1.0,Z);
injectCommands_P(PSTR("M500\n"));
selectedmeshpoint.x = 99;
selectedmeshpoint.y = 99;
injectCommands_P(PSTR("M500"));
selectedmeshpoint.x = selectedmeshpoint.y = 99;
}
break;
case 'G': // Get current offset
@ -790,8 +777,7 @@ namespace Anycubic {
TFTSer.println(live_Zoffset);
else {
TFTSer.println(getZOffset_mm());
selectedmeshpoint.x = 99;
selectedmeshpoint.y = 99;
selectedmeshpoint.x = selectedmeshpoint.y = 99;
}
break;
case 'S': { // Set offset (adjusts all points by value)
@ -859,8 +845,7 @@ namespace Anycubic {
case 34: { // A34 Adjust single mesh point A34 C/S X1 Y1 V123
if (panel_command[3] == 'C') { // Restore original offsets
injectCommands_P(PSTR("M501\nM420 S1"));
selectedmeshpoint.x = 99;
selectedmeshpoint.y = 99;
selectedmeshpoint.x = selectedmeshpoint.y = 99;
//printer_state = AC_printer_idle;
}
else {
@ -876,9 +861,10 @@ namespace Anycubic {
#endif
// Update Meshpoint
setMeshPoint(pos,newval);
if ( (printer_state == AC_printer_idle) || (printer_state == AC_printer_probing) ) {//!isPrinting()) {
// if we are at the current mesh point indicated on the panel Move Z pos +/- 0.05mm ( The panel changes the mesh value by +/- 0.05mm on each button press)
if ((selectedmeshpoint.x == pos.x) && (selectedmeshpoint.y == pos.y)) {
if (printer_state == AC_printer_idle || printer_state == AC_printer_probing /*!isPrinting()*/) {
// if we are at the current mesh point indicated on the panel Move Z pos +/- 0.05mm
// (The panel changes the mesh value by +/- 0.05mm on each button press)
if (selectedmeshpoint.x == pos.x && selectedmeshpoint.y == pos.y) {
setSoftEndstopState(false);
float currZpos = getAxisPosition_mm(Z);
#if ACDEBUG(AC_INFO)

2
Marlin/src/lcd/extui/lib/anycubic_chiron/chiron_tft_defs.h
View File

@ -88,7 +88,7 @@
#define MARLIN_msg_start_probing PSTR("Probing Point 1/25")
#define MARLIN_msg_probing_failed PSTR("Probing Failed")
#define MARLIN_msg_ready PSTR("3D Printer Ready.")
#define MARLIN_msg_ready PSTR(" Ready.")
#define MARLIN_msg_print_paused PSTR("Print Paused")
#define MARLIN_msg_print_aborted PSTR("Print Aborted")
#define MARLIN_msg_extruder_heating PSTR("E Heating...")