diff --git a/buildroot/share/PlatformIO/scripts/common-dependencies.py b/buildroot/share/PlatformIO/scripts/common-dependencies.py index 3844d8298..fe6ae7dba 100644 --- a/buildroot/share/PlatformIO/scripts/common-dependencies.py +++ b/buildroot/share/PlatformIO/scripts/common-dependencies.py @@ -3,16 +3,6 @@ # Convenience script to check dependencies and add libs and sources for Marlin Enabled Features # import subprocess,os,re -try: - import configparser -except ImportError: - import ConfigParser as configparser -try: - # PIO < 4.4 - from platformio.managers.package import PackageManager -except ImportError: - # PIO >= 4.4 - from platformio.package.meta import PackageSpec as PackageManager PIO_VERSION_MIN = (5, 0, 3) try: @@ -38,6 +28,9 @@ except SystemExit: except: print("Can't detect PlatformIO Version") +from platformio.package.meta import PackageSpec +from platformio.project.config import ProjectConfig + Import("env") #print(env.Dump()) @@ -51,13 +44,6 @@ def blab(str): if verbose: print(str) -def parse_pkg_uri(spec): - if PackageManager.__name__ == 'PackageSpec': - return PackageManager(spec).name - else: - name, _, _ = PackageManager.parse_pkg_uri(spec) - return name - FEATURE_CONFIG = {} def add_to_feat_cnf(feature, flines): @@ -86,9 +72,7 @@ def add_to_feat_cnf(feature, flines): feat['lib_deps'] = list(filter(lib_re.match, feat['lib_deps'])) + [dep] def load_config(): - config = configparser.ConfigParser() - config.read("platformio.ini") - items = config.items('features') + items = ProjectConfig().items('features') for key in items: feature = key[0].upper() if not feature in FEATURE_CONFIG: @@ -114,16 +98,14 @@ def get_all_known_libs(): if not 'lib_deps' in feat: continue for dep in feat['lib_deps']: - name = parse_pkg_uri(dep) - known_libs.append(name) + known_libs.append(PackageSpec(dep).name) return known_libs def get_all_env_libs(): env_libs = [] lib_deps = env.GetProjectOption('lib_deps') for dep in lib_deps: - name = parse_pkg_uri(dep) - env_libs.append(name) + env_libs.append(PackageSpec(dep).name) return env_libs def set_env_field(field, value): @@ -154,20 +136,19 @@ def apply_features_config(): # feat to add deps_to_add = {} for dep in feat['lib_deps']: - name = parse_pkg_uri(dep) - deps_to_add[name] = dep + deps_to_add[PackageSpec(dep).name] = dep # Does the env already have the dependency? deps = env.GetProjectOption('lib_deps') for dep in deps: - name = parse_pkg_uri(dep) + name = PackageSpec(dep).name if name in deps_to_add: del deps_to_add[name] # Are there any libraries that should be ignored? lib_ignore = env.GetProjectOption('lib_ignore') for dep in deps: - name = parse_pkg_uri(dep) + name = PackageSpec(dep).name if name in deps_to_add: del deps_to_add[name] diff --git a/ini/avr.ini b/ini/avr.ini new file mode 100644 index 000000000..944646190 --- /dev/null +++ b/ini/avr.ini @@ -0,0 +1,174 @@ +# +# Marlin Firmware +# PlatformIO Configuration File +# + +################################# +# # +# AVR Architecture # +# # +################################# + +# +# AVR (8-bit) Common Environment values +# +[common_avr8] +board_build.f_cpu = 16000000L +src_filter = ${common.default_src_filter} + + +# +# ATmega2560 +# +[env:mega2560] +platform = atmelavr +extends = common_avr8 +board = megaatmega2560 + +# +# ATmega2560 with extended pins 70-85 defined +# BOARD_BQ_ZUM_MEGA_3D +# BOARD_ULTIMAIN_2 +# BOARD_MIGHTYBOARD_REVE +# BOARD_EINSTART_S +# +[env:mega2560ext] +platform = atmelavr +extends = env:mega2560 +board_build.variant = megaextendedpins +extra_scripts = ${common.extra_scripts} + pre:buildroot/share/PlatformIO/scripts/copy_marlin_variant_to_framework.py + +# +# ATmega1280 +# +[env:mega1280] +platform = atmelavr +extends = common_avr8 +board = megaatmega1280 + +# +# MightyBoard AVR with extended pins +# +[mega_extended_optimized] +extends = common_avr8 +board_build.variant = megaextendedpins +extra_scripts = ${common.extra_scripts} + pre:buildroot/share/PlatformIO/scripts/copy_marlin_variant_to_framework.py +upload_speed = 57600 +build_flags = ${common.build_flags} -fno-tree-scev-cprop -fno-split-wide-types -Wl,--relax -mcall-prologues + +# +# MightyBoard ATmega1280 +# +[env:MightyBoard1280] +platform = atmelavr +extends = mega_extended_optimized +board = megaatmega1280 + +# +# MightyBoard ATmega2560 +# +[env:MightyBoard2560] +platform = atmelavr +extends = mega_extended_optimized +board = megaatmega2560 + +# +# RAMBo +# +[env:rambo] +platform = atmelavr +extends = common_avr8 +board = reprap_rambo + +# +# FYSETC F6 V1.3 / V1.4 +# +[env:FYSETC_F6] +platform = atmelavr +extends = common_avr8 +board = fysetc_f6 + +# +# Sanguinololu (ATmega644p) +# +[env:sanguino644p] +platform = atmelavr +extends = common_avr8 +board = sanguino_atmega644p + +# +# Sanguinololu (ATmega1284p) +# +[env:sanguino1284p] +platform = atmelavr +extends = common_avr8 +board = sanguino_atmega1284p +board_upload.maximum_size = 126976 + +# +# Melzi and clones (ATmega1284p) +# +[env:melzi] +platform = atmelavr +extends = env:sanguino1284p +upload_speed = 57600 + +# +# Sanguinololu (ATmega1284p stock bootloader with tuned flags) +# + +[tuned_1284p] +build_flags = ${common.build_flags} -fno-tree-scev-cprop -fno-split-wide-types -Wl,--relax -mcall-prologues + +[env:sanguino1284p_optimized] +platform = atmelavr +extends = env:melzi +build_flags = ${tuned_1284p.build_flags} + +# +# Melzi and clones (alias for sanguino1284p_optimized) +# +[env:melzi_optimized] +platform = atmelavr +extends = env:sanguino1284p_optimized + +# +# Melzi and clones (Optiboot bootloader) +# +[env:melzi_optiboot] +platform = atmelavr +extends = common_avr8 +board = sanguino_atmega1284p +upload_speed = 115200 + +# +# Melzi and clones (Zonestar Melzi2 with tuned flags) +# +[env:melzi_optiboot_optimized] +platform = atmelavr +extends = env:melzi_optiboot +build_flags = ${tuned_1284p.build_flags} + +# +# AT90USB1286 boards using CDC bootloader +# - BRAINWAVE +# - BRAINWAVE_PRO +# - SAV_MKI +# - TEENSYLU +# +[env:at90usb1286_cdc] +platform = teensy +extends = common_avr8 +board = at90usb1286 +lib_ignore = ${env:common_avr8.lib_ignore}, Teensy_ADC, NativeEthernet + +# +# AT90USB1286 boards using DFU bootloader +# - Printrboard +# - Printrboard Rev.F +# - ? 5DPRINT ? +# +[env:at90usb1286_dfu] +platform = teensy +extends = env:at90usb1286_cdc diff --git a/ini/due.ini b/ini/due.ini new file mode 100644 index 000000000..7abc262eb --- /dev/null +++ b/ini/due.ini @@ -0,0 +1,43 @@ +# +# Marlin Firmware +# PlatformIO Configuration File +# + +################################# +# # +# DUE Architecture # +# # +################################# + +# +# Due (Atmel SAM3X8E ARM Cortex-M3) +# +# - RAMPS4DUE +# - RADDS +# +[env:DUE] +platform = atmelsam +board = due +src_filter = ${common.default_src_filter} + + + +[env:DUE_USB] +platform = atmelsam +extends = env:DUE +board = dueUSB + +# +# Archim SAM +# +[common_DUE_archim] +platform = atmelsam +extends = env:DUE +board = archim +build_flags = ${common.build_flags} + -DARDUINO_SAM_ARCHIM -DARDUINO_ARCH_SAM -D__SAM3X8E__ -DUSBCON +board_build.variants_dir = buildroot/share/PlatformIO/variants/ +extra_scripts = ${common.extra_scripts} + Marlin/src/HAL/DUE/upload_extra_script.py + +[env:DUE_archim] +platform = ${common_DUE_archim.platform} +extends = common_DUE_archim diff --git a/ini/esp32.ini b/ini/esp32.ini new file mode 100644 index 000000000..1aee88f69 --- /dev/null +++ b/ini/esp32.ini @@ -0,0 +1,29 @@ +# +# Marlin Firmware +# PlatformIO Configuration File +# + +################################# +# # +# ESP32 Architecture # +# # +################################# + +# +# Espressif ESP32 +# +[env:esp32] +platform = espressif32@2.1.0 +board = esp32dev +build_flags = ${common.build_flags} -DCORE_DEBUG_LEVEL=0 +src_filter = ${common.default_src_filter} + +lib_ignore = NativeEthernet +upload_speed = 500000 +monitor_speed = 250000 +#upload_port = marlinesp.local +#board_build.flash_mode = qio + +[env:FYSETC_E4] +platform = espressif32@1.11.2 +extends = env:esp32 +board_build.partitions = default_16MB.csv diff --git a/ini/features.ini b/ini/features.ini new file mode 100644 index 000000000..7399a2244 --- /dev/null +++ b/ini/features.ini @@ -0,0 +1,218 @@ +# +# Marlin Firmware +# PlatformIO Configuration File +# + +################################# +# # +# Features Dependencies # +# # +################################# + +[features] +YHCB2004 = red-scorp/LiquidCrystal_AIP31068@^1.0.4, red-scorp/SoftSPIB@^1.1.1 +HAS_TFT_LVGL_UI = lvgl=https://github.com/makerbase-mks/LVGL-6.1.1-MKS/archive/master.zip + src_filter=+ + extra_scripts=download_mks_assets.py +POSTMORTEM_DEBUGGING = src_filter=+ + + build_flags=-funwind-tables +MKS_WIFI_MODULE = QRCode=https://github.com/makerbase-mks/QRCode/archive/master.zip +HAS_TRINAMIC_CONFIG = TMCStepper@~0.7.1 + src_filter=+ + + + + +HAS_STEALTHCHOP = src_filter=+ +SR_LCD_3W_NL = SailfishLCD=https://github.com/mikeshub/SailfishLCD/archive/master.zip +HAS_MOTOR_CURRENT_I2C = SlowSoftI2CMaster + src_filter=+ +HAS_TMC26X = TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip + src_filter=+ +HAS_L64XX = Arduino-L6470@0.8.0 + src_filter=+ + + + +NEOPIXEL_LED = Adafruit NeoPixel@1.5.0 + src_filter=+ +TEMP_.+_IS_MAX31865 = Adafruit MAX31865 library@~1.1.0 +USES_LIQUIDCRYSTAL = bitbucket-fmalpartida/LiquidCrystal@1.5.0 +USES_LIQUIDCRYSTAL_I2C = marcoschwartz/LiquidCrystal_I2C@1.1.4 +USES_LIQUIDTWI2 = LiquidTWI2@1.2.7 +HAS_WIRED_LCD = src_filter=+ +HAS_MARLINUI_HD44780 = src_filter=+ +HAS_MARLINUI_U8GLIB = U8glib-HAL@~0.4.1 + src_filter=+ +HAS_(FSMC|SPI)_TFT = src_filter=+ + + +HAS_FSMC_TFT = src_filter=+ + +HAS_SPI_TFT = src_filter=+ + +I2C_EEPROM = src_filter=+ +SPI_EEPROM = src_filter=+ +HAS_GRAPHICAL_TFT = src_filter=+ +DWIN_CREALITY_LCD = src_filter=+ +IS_TFTGLCD_PANEL = src_filter=+ +HAS_TOUCH_BUTTONS = src_filter=+ +HAS_LCD_MENU = src_filter=+ +HAS_GAMES = src_filter=+ +MARLIN_BRICKOUT = src_filter=+ +MARLIN_INVADERS = src_filter=+ +MARLIN_MAZE = src_filter=+ +MARLIN_SNAKE = src_filter=+ +HAS_MENU_BACKLASH = src_filter=+ +HAS_MENU_BED_CORNERS = src_filter=+ +LCD_BED_LEVELING = src_filter=+ +HAS_MENU_CANCELOBJECT = src_filter=+ +HAS_MENU_DELTA_CALIBRATE = src_filter=+ +HAS_MENU_FILAMENT = src_filter=+ +LCD_INFO_MENU = src_filter=+ +HAS_MENU_JOB_RECOVERY = src_filter=+ +HAS_MULTI_LANGUAGE = src_filter=+ +HAS_MENU_LED = src_filter=+ +HAS_MENU_MEDIA = src_filter=+ +HAS_MENU_MIXER = src_filter=+ +HAS_MENU_MMU2 = src_filter=+ +HAS_MENU_PASSWORD = src_filter=+ +HAS_MENU_POWER_MONITOR = src_filter=+ +HAS_MENU_CUTTER = src_filter=+ +HAS_MENU_TEMPERATURE = src_filter=+ +HAS_MENU_TMC = src_filter=+ +HAS_MENU_TOUCH_SCREEN = src_filter=+ +HAS_MENU_TRAMMING = src_filter=+ +HAS_MENU_UBL = src_filter=+ +ANYCUBIC_LCD_CHIRON = src_filter=+ + +ANYCUBIC_LCD_I3MEGA = src_filter=+ + +NEXTION_TFT = src_filter=+ + +HAS_DGUS_LCD = src_filter=+ + +DGUS_LCD_UI_FYSETC = src_filter=+ +DGUS_LCD_UI_HIPRECY = src_filter=+ +DGUS_LCD_UI_MKS = src_filter=+ +DGUS_LCD_UI_ORIGIN = src_filter=+ +TOUCH_UI_FTDI_EVE = src_filter=+ +EXTUI_EXAMPLE = src_filter=+ +MALYAN_LCD = src_filter=+ +USE_UHS2_USB = src_filter=+ +USE_UHS3_USB = src_filter=+ +USB_FLASH_DRIVE_SUPPORT = src_filter=+ +AUTO_BED_LEVELING_BILINEAR = src_filter=+ +AUTO_BED_LEVELING_(3POINT|(BI)?LINEAR) = src_filter=+ +MESH_BED_LEVELING = src_filter=+ + +AUTO_BED_LEVELING_UBL = src_filter=+ + +UBL_HILBERT_CURVE = src_filter=+ +BACKLASH_COMPENSATION = src_filter=+ +BARICUDA = src_filter=+ + +BINARY_FILE_TRANSFER = src_filter=+ + +BLTOUCH = src_filter=+ +CANCEL_OBJECTS = src_filter=+ + +CASE_LIGHT_ENABLE = src_filter=+ + +EXTERNAL_CLOSED_LOOP_CONTROLLER = src_filter=+ + +USE_CONTROLLER_FAN = src_filter=+ +HAS_MOTOR_CURRENT_DAC = src_filter=+ +DIRECT_STEPPING = src_filter=+ + +EMERGENCY_PARSER = src_filter=+ - +I2C_POSITION_ENCODERS = src_filter=+ +IIC_BL24CXX_EEPROM = src_filter=+ +HAS_SPI_FLASH = src_filter=+ +HAS_ETHERNET = src_filter=+ + +HAS_FANMUX = src_filter=+ +FILAMENT_WIDTH_SENSOR = src_filter=+ + +FWRETRACT = src_filter=+ + +HOST_ACTION_COMMANDS = src_filter=+ +HOTEND_IDLE_TIMEOUT = src_filter=+ +JOYSTICK = src_filter=+ +BLINKM = src_filter=+ +HAS_COLOR_LEDS = src_filter=+ + +PCA9533 = src_filter=+ +PCA9632 = src_filter=+ +PRINTER_EVENT_LEDS = src_filter=+ +TEMP_STAT_LEDS = src_filter=+ +MAX7219_DEBUG = src_filter=+ + +HAS_MEATPACK = src_filter=+ +MIXING_EXTRUDER = src_filter=+ + +HAS_PRUSA_MMU1 = src_filter=+ +HAS_PRUSA_MMU2 = src_filter=+ + +PASSWORD_FEATURE = src_filter=+ + +ADVANCED_PAUSE_FEATURE = src_filter=+ + + +AUTO_POWER_CONTROL = src_filter=+ +HAS_POWER_MONITOR = src_filter=+ + +POWER_LOSS_RECOVERY = src_filter=+ + +PROBE_TEMP_COMPENSATION = src_filter=+ + +HAS_FILAMENT_SENSOR = src_filter=+ + +(EXT|MANUAL)_SOLENOID.* = src_filter=+ + +MK2_MULTIPLEXER = src_filter=+ +HAS_CUTTER = src_filter=+ + +EXPERIMENTAL_I2CBUS = src_filter=+ + +MECHANICAL_GANTRY_CAL.+ = src_filter=+ +Z_MULTI_ENDSTOPS = src_filter=+ +Z_STEPPER_AUTO_ALIGN = src_filter=+ + +G26_MESH_VALIDATION = src_filter=+ +ASSISTED_TRAMMING = src_filter=+ + +HAS_MESH = src_filter=+ +HAS_LEVELING = src_filter=+ + +DELTA_AUTO_CALIBRATION = src_filter=+ +CALIBRATION_GCODE = src_filter=+ +Z_MIN_PROBE_REPEATABILITY_TEST = src_filter=+ +M100_FREE_MEMORY_WATCHER = src_filter=+ +BACKLASH_GCODE = src_filter=+ +IS_KINEMATIC = src_filter=+ +HAS_EXTRA_ENDSTOPS = src_filter=+ +SKEW_CORRECTION_GCODE = src_filter=+ +DIRECT_PIN_CONTROL = src_filter=+ + +PINS_DEBUGGING = src_filter=+ +NO_VOLUMETRICS = src_filter=- +HAS_MULTI_EXTRUDER = src_filter=+ +HAS_HOTEND_OFFSET = src_filter=+ +EDITABLE_SERVO_ANGLES = src_filter=+ +PIDTEMP = src_filter=+ +PREVENT_COLD_EXTRUSION = src_filter=+ +PIDTEMPBED = src_filter=+ +HAS_USER_THERMISTORS = src_filter=+ +SD_ABORT_ON_ENDSTOP_HIT = src_filter=+ +BAUD_RATE_GCODE = src_filter=+ +HAS_SMART_EFF_MOD = src_filter=+ +COOLANT_CONTROL = src_filter=+ +HAS_SOFTWARE_ENDSTOPS = src_filter=+ +HAS_DUPLICATION_MODE = src_filter=+ +LIN_ADVANCE = src_filter=+ +PHOTO_GCODE = src_filter=+ +CONTROLLER_FAN_EDITABLE = src_filter=+ +GCODE_MACROS = src_filter=+ +GRADIENT_MIX = src_filter=+ +HAS_SAVED_POSITIONS = src_filter=+ + +PARK_HEAD_ON_PAUSE = src_filter=+ +FILAMENT_LOAD_UNLOAD_GCODES = src_filter=+ +CNC_WORKSPACE_PLANES = src_filter=+ +CNC_COORDINATE_SYSTEMS = src_filter=+ +HAS_M206_COMMAND = src_filter=+ +EXPECTED_PRINTER_CHECK = src_filter=+ +HOST_KEEPALIVE_FEATURE = src_filter=+ +REPETIER_GCODE_M360 = src_filter=+ +HAS_GCODE_M876 = src_filter=+ +HAS_RESUME_CONTINUE = src_filter=+ +HAS_LCD_CONTRAST = src_filter=+ +LCD_SET_PROGRESS_MANUALLY = src_filter=+ +TOUCH_SCREEN_CALIBRATION = src_filter=+ +ARC_SUPPORT = src_filter=+ +GCODE_MOTION_MODES = src_filter=+ +BABYSTEPPING = src_filter=+ + +Z_PROBE_SLED = src_filter=+ +G38_PROBE_TARGET = src_filter=+ +MAGNETIC_PARKING_EXTRUDER = src_filter=+ +SDSUPPORT = src_filter=+ + + + + + + +HAS_MEDIA_SUBCALLS = src_filter=+ +GCODE_REPEAT_MARKERS = src_filter=+ + +HAS_EXTRUDERS = src_filter=+ + +HAS_COOLER = src_filter=+ + +AUTO_REPORT_TEMPERATURES = src_filter=+ +INCH_MODE_SUPPORT = src_filter=+ +TEMPERATURE_UNITS_SUPPORT = src_filter=+ +NEED_HEX_PRINT = src_filter=+ +NEED_LSF = src_filter=+ +NOZZLE_PARK_FEATURE = src_filter=+ + +NOZZLE_CLEAN_FEATURE = src_filter=+ + +DELTA = src_filter=+ + +BEZIER_CURVE_SUPPORT = src_filter=+ + +PRINTCOUNTER = src_filter=+ +HAS_BED_PROBE = src_filter=+ + + + +IS_SCARA = src_filter=+ +HAS_SERVOS = src_filter=+ + +MORGAN_SCARA = src_filter=+ +HAS_MICROSTEPS = src_filter=+ +(ESP3D_)?WIFISUPPORT = AsyncTCP, ESP Async WebServer + ESP3DLib=https://github.com/luc-github/ESP3DLib/archive/master.zip + arduinoWebSockets=links2004/WebSockets@2.3.4 + luc-github/ESP32SSDP@^1.1.1 + lib_ignore=ESPAsyncTCP diff --git a/ini/lpc176x.ini b/ini/lpc176x.ini new file mode 100644 index 000000000..2a59ba7f5 --- /dev/null +++ b/ini/lpc176x.ini @@ -0,0 +1,44 @@ +# +# Marlin Firmware +# PlatformIO Configuration File +# + +################################# +# # +# LPC176x Architecture # +# # +################################# + +# +# NXP LPC176x ARM Cortex-M3 +# +[common_LPC] +platform = https://github.com/p3p/pio-nxplpc-arduino-lpc176x/archive/0.1.3.zip +platform_packages = framework-arduino-lpc176x@^0.2.6 +board = nxp_lpc1768 +lib_ldf_mode = off +lib_compat_mode = strict +extra_scripts = ${common.extra_scripts} + Marlin/src/HAL/LPC1768/upload_extra_script.py +src_filter = ${common.default_src_filter} + + +lib_deps = ${common.lib_deps} + Servo +custom_marlin.USES_LIQUIDCRYSTAL = arduino-libraries/LiquidCrystal@~1.0.7 +custom_marlin.NEOPIXEL_LED = Adafruit NeoPixel=https://github.com/p3p/Adafruit_NeoPixel/archive/1.5.0.zip +build_flags = ${common.build_flags} -DU8G_HAL_LINKS -IMarlin/src/HAL/LPC1768/include -IMarlin/src/HAL/LPC1768/u8g + # debug options for backtrace + #-funwind-tables + #-mpoke-function-name + +# +# NXP LPC176x ARM Cortex-M3 +# +[env:LPC1768] +platform = ${common_LPC.platform} +extends = common_LPC +board = nxp_lpc1768 + +[env:LPC1769] +platform = ${common_LPC.platform} +extends = common_LPC +board = nxp_lpc1769 diff --git a/ini/native.ini b/ini/native.ini new file mode 100644 index 000000000..dbdfd26f8 --- /dev/null +++ b/ini/native.ini @@ -0,0 +1,23 @@ +# +# Marlin Firmware +# PlatformIO Configuration File +# + +################################# +# # +# Native / Simulation # +# # +################################# + +# +# No supported Arduino libraries, base Marlin only +# +[env:linux_native] +platform = native +framework = +build_flags = -D__PLAT_LINUX__ -std=gnu++17 -ggdb -g -lrt -lpthread -D__MARLIN_FIRMWARE__ -Wno-expansion-to-defined +src_build_flags = -Wall -IMarlin/src/HAL/LINUX/include +build_unflags = -Wall +lib_ldf_mode = off +lib_deps = +src_filter = ${common.default_src_filter} + diff --git a/ini/samd51.ini b/ini/samd51.ini new file mode 100644 index 000000000..8e8682da9 --- /dev/null +++ b/ini/samd51.ini @@ -0,0 +1,27 @@ +# +# Marlin Firmware +# PlatformIO Configuration File +# + +################################# +# # +# SAMD51 Architecture # +# # +################################# + +# +# Adafruit Grand Central M4 (Atmel SAMD51P20A ARM Cortex-M4) +# +[env:SAMD51_grandcentral_m4] +platform = atmelsam +board = adafruit_grandcentral_m4 +build_flags = ${common.build_flags} -std=gnu++17 +build_unflags = -std=gnu++11 +src_filter = ${common.default_src_filter} + +lib_deps = ${common.lib_deps} + SoftwareSerialM + Adafruit SPIFlash +extra_scripts = ${common.extra_scripts} + pre:buildroot/share/PlatformIO/scripts/SAMD51_grandcentral_m4.py +custom_marlin.SDSUPPORT = SdFat - Adafruit Fork +debug_tool = jlink diff --git a/ini/stm32f0.ini b/ini/stm32f0.ini new file mode 100644 index 000000000..fb6ce00dd --- /dev/null +++ b/ini/stm32f0.ini @@ -0,0 +1,42 @@ +# +# Marlin Firmware +# PlatformIO Configuration File +# + +################################# +# # +# STM32F0 Architecture # +# # +################################# + +# +# Malyan M200 v2 (STM32F070RB) +# +[env:STM32F070RB_malyan] +platform = ${common_stm32.platform} +extends = common_stm32 +board = malyanM200v2 +build_flags = ${common_stm32.build_flags} -DHAL_PCD_MODULE_ENABLED + -O2 -ffreestanding -fsigned-char -fno-move-loop-invariants -fno-strict-aliasing + -DCUSTOM_STARTUP_FILE + +# +# Malyan M200 v2 (STM32F070CB) +# +[env:STM32F070CB_malyan] +platform = ${common_stm32.platform} +extends = common_stm32 +board = malyanm200_f070cb +build_flags = ${common_stm32.build_flags} + -DHAL_PCD_MODULE_ENABLED -DDISABLE_GENERIC_SERIALUSB -DHAL_UART_MODULE_ENABLED -DCUSTOM_STARTUP_FILE + +# +# Malyan M300 (STM32F070CB) +# +[env:malyan_M300] +platform = ${common_stm32.platform} +extends = common_stm32 +board = malyanm300_f070cb +build_flags = ${common_stm32.build_flags} + -DHAL_PCD_MODULE_ENABLED -DDISABLE_GENERIC_SERIALUSB -DHAL_UART_MODULE_ENABLED +src_filter = ${common.default_src_filter} + diff --git a/ini/stm32f1.ini b/ini/stm32f1.ini new file mode 100644 index 000000000..2ba3d8486 --- /dev/null +++ b/ini/stm32f1.ini @@ -0,0 +1,439 @@ +# +# Marlin Firmware +# PlatformIO Configuration File +# + +################################# +# # +# STM32F1 Architecture # +# # +################################# + +# +# HAL/STM32 Base Environment values +# +[common_stm32] +platform = ststm32@~12.0 +build_flags = ${common.build_flags} + -std=gnu++14 + -DUSBCON -DUSBD_USE_CDC + -DTIM_IRQ_PRIO=13 + -DADC_RESOLUTION=12 +build_unflags = -std=gnu++11 +src_filter = ${common.default_src_filter} + + + +# +# HAL/STM32F1 Common Environment values +# +[common_stm32f1] +platform = ststm32@~12.0 +board_build.core = maple +build_flags = !python Marlin/src/HAL/STM32F1/build_flags.py + ${common.build_flags} + -DARDUINO_ARCH_STM32 +build_unflags = -std=gnu11 -std=gnu++11 +src_filter = ${common.default_src_filter} + +lib_ignore = SPI, FreeRTOS701, FreeRTOS821 +lib_deps = ${common.lib_deps} + SoftwareSerialM +platform_packages = tool-stm32duino +extra_scripts = ${common.extra_scripts} + pre:buildroot/share/PlatformIO/scripts/fix_framework_weakness.py + +# +# STM32F103RC +# +[env:STM32F103RC] +platform = ${common_stm32f1.platform} +extends = common_stm32f1 +board = genericSTM32F103RC +monitor_speed = 115200 + +# +# MEEB_3DP (STM32F103RCT6 with 512K) +# +[env:STM32F103RC_meeb] +platform = ${common_stm32f1.platform} +extends = common_stm32f1 +board = MEEB_3DP +build_flags = ${common_stm32f1.build_flags} + -DDEBUG_LEVEL=0 + -DSS_TIMER=4 + -DSTM32_FLASH_SIZE=512 + -DHSE_VALUE=12000000U + -DUSE_USB_COMPOSITE + -DVECT_TAB_OFFSET=0x2000 + -DGENERIC_BOOTLOADER +extra_scripts = ${common_stm32f1.extra_scripts} + pre:buildroot/share/PlatformIO/scripts/STM32F1_create_variant.py + buildroot/share/PlatformIO/scripts/STM32F103RC_MEEB_3DP.py +lib_deps = ${common.lib_deps} + SoftwareSerialM + USBComposite for STM32F1@0.91 +custom_marlin.NEOPIXEL_LED = Adafruit NeoPixel=https://github.com/ccccmagicboy/Adafruit_NeoPixel#meeb_3dp_use +debug_tool = stlink +upload_protocol = dfu + +# +# STM32F103RC_fysetc +# +[env:STM32F103RC_fysetc] +platform = ${common_stm32f1.platform} +extends = env:STM32F103RC +extra_scripts = ${common_stm32f1.extra_scripts} + buildroot/share/PlatformIO/scripts/STM32F103RC_fysetc.py +build_flags = ${common_stm32f1.build_flags} -DDEBUG_LEVEL=0 +lib_ldf_mode = chain +debug_tool = stlink +upload_protocol = serial + +# +# BigTree SKR Mini V1.1 / SKR mini E3 / SKR E3 DIP (STM32F103RCT6 ARM Cortex-M3) +# +# STM32F103RC_btt ............. RCT6 with 256K +# STM32F103RC_btt_USB ......... RCT6 with 256K (USB mass storage) +# STM32F103RC_btt_512K ........ RCT6 with 512K +# STM32F103RC_btt_512K_USB .... RCT6 with 512K (USB mass storage) +# +# WARNING! If you have an SKR Mini v1.1 or an SKR Mini E3 1.0 / 1.2 / 2.0 / DIP +# and experience a printer freeze, re-flash Marlin using the regular (non-512K) +# build option. 256K chips may be re-branded 512K chips, but this means the +# upper 256K is sketchy, and failure is very likely. +# + +[env:STM32F103RC_btt] +platform = ${common_stm32f1.platform} +extends = env:STM32F103RC +extra_scripts = ${common_stm32f1.extra_scripts} + buildroot/share/PlatformIO/scripts/STM32F103RC_SKR_MINI.py +build_flags = ${common_stm32f1.build_flags} + -DDEBUG_LEVEL=0 -DSS_TIMER=4 +monitor_speed = 115200 + +[env:STM32F103RC_btt_USB] +platform = ${common_stm32f1.platform} +extends = env:STM32F103RC_btt +build_flags = ${env:STM32F103RC_btt.build_flags} -DUSE_USB_COMPOSITE +lib_deps = ${env:STM32F103RC_btt.lib_deps} + USBComposite for STM32F1@0.91 + +[env:STM32F103RC_btt_512K] +platform = ${common_stm32f1.platform} +extends = env:STM32F103RC_btt +board_upload.maximum_size=524288 +build_flags = ${env:STM32F103RC_btt.build_flags} -DSTM32_FLASH_SIZE=512 + +[env:STM32F103RC_btt_512K_USB] +platform = ${common_stm32f1.platform} +extends = env:STM32F103RC_btt_512K +build_flags = ${env:STM32F103RC_btt_512K.build_flags} -DUSE_USB_COMPOSITE +lib_deps = ${env:STM32F103RC_btt_512K.lib_deps} + USBComposite for STM32F1@0.91 + +# +# STM32F103RE +# +[env:STM32F103RE] +platform = ${common_stm32f1.platform} +extends = common_stm32f1 +board = genericSTM32F103RE +monitor_speed = 115200 + +# +# STM32F103RE_btt ............. RET6 +# STM32F103RE_btt_USB ......... RET6 (USB mass storage) +# +[env:STM32F103RE_btt] +platform = ${common_stm32f1.platform} +extends = env:STM32F103RE +extra_scripts = ${common_stm32f1.extra_scripts} + buildroot/share/PlatformIO/scripts/STM32F103RE_SKR_E3_DIP.py +build_flags = ${common_stm32f1.build_flags} -DDEBUG_LEVEL=0 -DSS_TIMER=4 +debug_tool = stlink +upload_protocol = stlink + +[env:STM32F103RE_btt_USB] +platform = ${common_stm32f1.platform} +extends = env:STM32F103RE_btt +build_flags = ${env:STM32F103RE_btt.build_flags} -DUSE_USB_COMPOSITE +lib_deps = ${common_stm32f1.lib_deps} + USBComposite for STM32F1@0.91 + +# +# Geeetech GTM32 (STM32F103VET6) +# +[env:STM32F103VE_GTM32] +platform = ${common_stm32f1.platform} +extends = common_stm32f1 +board = genericSTM32F103VE +build_flags = ${common_stm32f1.build_flags} + -ffunction-sections -fdata-sections -nostdlib -MMD + -DMCU_STM32F103VE -DARDUINO_GENERIC_STM32F103V -DARDUINO_ARCH_STM32F1 -DBOARD_generic_stm32f103v + -DDEBUG_LEVEL=DEBUG_NONE -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG=1 -DVECT_TAB_ADDR=0x8000000 + -DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6 +upload_protocol = serial + +# +# Longer 3D board in Alfawise U20 (STM32F103VET6) +# +[env:STM32F103VE_longer] +platform = ${common_stm32f1.platform} +extends = common_stm32f1 +board = genericSTM32F103VE +extra_scripts = ${common_stm32f1.extra_scripts} + buildroot/share/PlatformIO/scripts/STM32F103VE_longer.py +build_flags = ${common_stm32f1.build_flags} + -DMCU_STM32F103VE -DSTM32F1xx -USERIAL_USB -DU20 -DTS_V12 +build_unflags = ${common_stm32f1.build_unflags} + -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG=1 -DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6 + +# +# MKS Robin Mini (STM32F103VET6) +# +[env:mks_robin_mini] +platform = ${common_stm32f1.platform} +extends = common_stm32f1 +board = genericSTM32F103VE +extra_scripts = ${common_stm32f1.extra_scripts} + buildroot/share/PlatformIO/scripts/mks_robin_mini.py +build_flags = ${common_stm32f1.build_flags} + -DMCU_STM32F103VE + +# +# MKS Robin Nano (STM32F103VET6) +# +[env:mks_robin_nano35] +platform = ${common_stm32f1.platform} +extends = common_stm32f1 +board = genericSTM32F103VE +extra_scripts = ${common_stm32f1.extra_scripts} + buildroot/share/PlatformIO/scripts/mks_robin_nano35.py +build_flags = ${common_stm32f1.build_flags} + -DMCU_STM32F103VE -DSS_TIMER=4 +debug_tool = jlink +upload_protocol = jlink + +# +# MKS Robin (STM32F103ZET6) +# +[env:mks_robin] +platform = ${common_stm32f1.platform} +extends = common_stm32f1 +board = genericSTM32F103ZE +extra_scripts = ${common_stm32f1.extra_scripts} + buildroot/share/PlatformIO/scripts/mks_robin.py +build_flags = ${common_stm32f1.build_flags} + -DSS_TIMER=4 -DSTM32_XL_DENSITY + +# MKS Robin (STM32F103ZET6) +# Uses HAL STM32 to support Marlin UI for TFT screen with optional touch panel +# +[env:mks_robin_stm32] +platform = ${common_stm32.platform} +extends = common_stm32 +board = genericSTM32F103ZE +board_build.core = stm32 +board_build.variant = MARLIN_F103Zx +board_build.ldscript = ldscript.ld +board_build.offset = 0x7000 +board_build.encrypt = Yes +board_build.firmware = Robin.bin +build_flags = ${common_stm32.build_flags} + -DENABLE_HWSERIAL3 -DTIMER_SERIAL=TIM5 +build_unflags = ${common_stm32.build_unflags} + -DUSBCON -DUSBD_USE_CDC +extra_scripts = ${common.extra_scripts} + pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py + buildroot/share/PlatformIO/scripts/stm32_bootloader.py + buildroot/share/PlatformIO/scripts/mks_encrypt.py +lib_deps = + +# +# MKS Robin Pro (STM32F103ZET6) +# +[env:mks_robin_pro] +platform = ${common_stm32f1.platform} +extends = env:mks_robin +extra_scripts = ${common_stm32f1.extra_scripts} + buildroot/share/PlatformIO/scripts/mks_robin_pro.py + +# +# TRIGORILLA PRO (STM32F103ZET6) +# +[env:trigorilla_pro] +platform = ${common_stm32f1.platform} +extends = env:mks_robin +extra_scripts = ${common_stm32f1.extra_scripts} + +# +# MKS Robin E3D (STM32F103RCT6) and +# MKS Robin E3 with TMC2209 +# +[env:mks_robin_e3] +platform = ${common_stm32f1.platform} +extends = common_stm32f1 +board = genericSTM32F103RC +platform_packages = tool-stm32duino +extra_scripts = ${common_stm32f1.extra_scripts} + buildroot/share/PlatformIO/scripts/mks_robin_e3.py +build_flags = ${common_stm32f1.build_flags} + -DDEBUG_LEVEL=0 -DSS_TIMER=4 + +# +# MKS Robin E3p (STM32F103VET6) +# - LVGL UI +# +[env:mks_robin_e3p] +platform = ${common_stm32f1.platform} +extends = common_stm32f1 +board = genericSTM32F103VE +extra_scripts = ${common_stm32f1.extra_scripts} + buildroot/share/PlatformIO/scripts/mks_robin_e3p.py +build_flags = ${common_stm32f1.build_flags} + -DMCU_STM32F103VE -DSS_TIMER=4 +debug_tool = jlink +upload_protocol = jlink + +# +# MKS Robin Lite/Lite2 (STM32F103RCT6) +# +[env:mks_robin_lite] +platform = ${common_stm32f1.platform} +extends = common_stm32f1 +board = genericSTM32F103RC +extra_scripts = ${common_stm32f1.extra_scripts} + buildroot/share/PlatformIO/scripts/mks_robin_lite.py + +# +# MKS ROBIN LITE3 (STM32F103RCT6) +# +[env:mks_robin_lite3] +platform = ${common_stm32f1.platform} +extends = common_stm32f1 +board = genericSTM32F103RC +extra_scripts = ${common_stm32f1.extra_scripts} + buildroot/share/PlatformIO/scripts/mks_robin_lite3.py + +# +# JGAurora A5S A1 (STM32F103ZET6) +# +[env:jgaurora_a5s_a1] +platform = ${common_stm32f1.platform} +extends = common_stm32f1 +board = genericSTM32F103ZE +extra_scripts = ${common_stm32f1.extra_scripts} + buildroot/share/PlatformIO/scripts/jgaurora_a5s_a1_with_bootloader.py +build_flags = ${common_stm32f1.build_flags} + -DSTM32F1xx -DSTM32_XL_DENSITY + +# +# Malyan M200 (STM32F103CB) +# +[env:STM32F103CB_malyan] +platform = ${common_stm32f1.platform} +extends = common_stm32f1 +board = malyanM200 +build_flags = ${common_stm32f1.build_flags} + -DMCU_STM32F103CB -D__STM32F1__=1 -std=c++1y -DSERIAL_USB -ffunction-sections -fdata-sections + -Wl,--gc-sections -DDEBUG_LEVEL=0 -D__MARLIN_FIRMWARE__ +lib_ignore = ${common_stm32f1.lib_ignore} + SoftwareSerialM + +# +# Chitu boards like Tronxy X5s (STM32F103ZET6) +# +[env:chitu_f103] +platform = ${common_stm32f1.platform} +extends = common_stm32f1 +board = CHITU_F103 +extra_scripts = pre:buildroot/share/PlatformIO/scripts/common-dependencies.py + pre:buildroot/share/PlatformIO/scripts/STM32F1_create_variant.py + buildroot/share/PlatformIO/scripts/chitu_crypt.py +build_flags = ${common_stm32f1.build_flags} + -DSTM32F1xx -DSTM32_XL_DENSITY +build_unflags = ${common_stm32f1.build_unflags} + -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG= -DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6 + +# +# Some Chitu V5 boards have a problem with GPIO init. +# Use this target if G28 or G29 are always failing. +# +[env:chitu_v5_gpio_init] +platform = ${common_stm32f1.platform} +extends = env:chitu_f103 +build_flags = ${env:chitu_f103.build_flags} -DCHITU_V5_Z_MIN_BUGFIX + +# +# Creality (STM32F103RET6) +# +[env:STM32F103RET6_creality] +platform = ${env:STM32F103RE.platform} +extends = env:STM32F103RE +build_flags = ${env:STM32F103RE.build_flags} -DTEMP_TIMER_CHAN=4 +extra_scripts = ${env:STM32F103RE.extra_scripts} + pre:buildroot/share/PlatformIO/scripts/random-bin.py + buildroot/share/PlatformIO/scripts/STM32F103RET6_creality.py +debug_tool = jlink +upload_protocol = jlink + +# +# FLSUN QQS Pro (STM32F103VET6) using hal STM32 +# board Hispeedv1 +# +[env:flsun_hispeedv1] +platform = ${common_stm32.platform} +extends = common_stm32 +build_flags = ${common_stm32.build_flags} -DMCU_STM32F103VE -DSS_TIMER=4 -DENABLE_HWSERIAL3 +board = genericSTM32F103VE +board_build.core = stm32 +board_build.variant = MARLIN_F103Vx +board_build.ldscript = ldscript.ld +board_build.offset = 0x7000 +board_build.firmware = Robin_mini.bin +board_build.encrypt = Yes +board_upload.offset_address = 0x08007000 +build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC +extra_scripts = ${common.extra_scripts} + pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py + buildroot/share/PlatformIO/scripts/stm32_bootloader.py + buildroot/share/PlatformIO/scripts/mks_encrypt.py + +# +# MKS Robin Nano V1.2 and V2 using hal STM32 +# +[env:mks_robin_nano35_stm32] +platform = ${common_stm32.platform} +extends = common_stm32 +build_flags = ${common_stm32.build_flags} -DMCU_STM32F103VE -DSS_TIMER=4 -DENABLE_HWSERIAL3 +board = genericSTM32F103VE +board_build.core = stm32 +board_build.variant = MARLIN_F103Vx +board_build.ldscript = ldscript.ld +board_build.offset = 0x7000 +board_build.encrypt = Yes +board_build.firmware = Robin_nano35.bin +board_upload.offset_address = 0x08007000 +build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC +debug_tool = jlink +upload_protocol = jlink +extra_scripts = ${common.extra_scripts} + pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py + buildroot/share/PlatformIO/scripts/stm32_bootloader.py + buildroot/share/PlatformIO/scripts/mks_encrypt.py + +# +# Mingda MPX_ARM_MINI +# +[env:mingda_mpx_arm_mini] +platform = ${common_stm32.platform} +extends = common_stm32 +board = genericSTM32F103ZE +board_build.core = stm32 +board_build.variant = MARLIN_F103Zx +board_build.ldscript = ldscript.ld +board_build.offset = 0x10000 +build_flags = ${common_stm32.build_flags} -DENABLE_HWSERIAL3 -DTIMER_SERIAL=TIM5 +build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC +extra_scripts = ${common.extra_scripts} + pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py + buildroot/share/PlatformIO/scripts/stm32_bootloader.py diff --git a/ini/stm32f4.ini b/ini/stm32f4.ini new file mode 100644 index 000000000..a15dc8b05 --- /dev/null +++ b/ini/stm32f4.ini @@ -0,0 +1,371 @@ +# +# Marlin Firmware +# PlatformIO Configuration File +# + +################################# +# # +# STM32F4 Architecture # +# # +################################# + +# +# ARMED (STM32) +# +[env:ARMED] +platform = ${common_stm32.platform} +extends = common_stm32 +board = armed_v1 +build_flags = ${common_stm32.build_flags} + -O2 -ffreestanding -fsigned-char -fno-move-loop-invariants -fno-strict-aliasing + +# +# STM32F401VE +# 'STEVAL-3DP001V1' STM32F401VE board - https://www.st.com/en/evaluation-tools/steval-3dp001v1.html +# +[env:STM32F401VE_STEVAL] +platform = ${common_stm32.platform} +extends = common_stm32 +board = STEVAL_STM32F401VE +build_flags = ${common_stm32.build_flags} + -DARDUINO_STEVAL -DSTM32F401xE + -DDISABLE_GENERIC_SERIALUSB -DUSBD_USE_CDC_COMPOSITE -DUSE_USB_FS +extra_scripts = ${common.extra_scripts} + pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py + buildroot/share/PlatformIO/scripts/STM32F401VE_STEVAL.py + +# +# STM32F401RC +# +[env:FYSETC_CHEETAH_V20] +platform = ${common_stm32.platform} +extends = common_stm32 +board = FYSETC_CHEETAH_V20 +build_flags = ${common_stm32.build_flags} -DSTM32F401xC -DVECT_TAB_OFFSET=0xC000 +extra_scripts = ${common.extra_scripts} + pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py + buildroot/share/PlatformIO/scripts/FYSETC_CHEETAH_V20.py + +# +# FLYF407ZG +# +[env:FLYF407ZG] +platform = ${common_stm32.platform} +extends = common_stm32 +board = FLYF407ZG +build_flags = ${common_stm32.build_flags} + -DVECT_TAB_OFFSET=0x8000 +extra_scripts = ${common.extra_scripts} + pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py + +# +# FLY MINI(stm32f103rct6) +# +[env:FLY_MINI] +platform = ${common_stm32f1.platform} +extends = common_stm32f1 +board = genericSTM32F103RC +extra_scripts = ${common_stm32f1.extra_scripts} + buildroot/share/PlatformIO/scripts/fly_mini.py +build_flags = ${common_stm32f1.build_flags} + -DDEBUG_LEVEL=0 -DSS_TIMER=4 + +# +# FYSETC S6 (STM32F446VET6 ARM Cortex-M4) +# +[env:FYSETC_S6] +platform = ${common_stm32.platform} +extends = common_stm32 +platform_packages = tool-stm32duino +board = marlin_fysetc_s6 +build_flags = ${common_stm32.build_flags} + -DVECT_TAB_OFFSET=0x10000 + -DHAL_PCD_MODULE_ENABLED +extra_scripts = ${common.extra_scripts} + pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py +debug_tool = stlink +upload_protocol = dfu +upload_command = dfu-util -a 0 -s 0x08010000:leave -D "$SOURCE" + +# +# STM32F407VET6 with RAMPS-like shield +# 'Black' STM32F407VET6 board - https://wiki.stm32duino.com/index.php?title=STM32F407 +# Shield - https://github.com/jmz52/Hardware +# +[env:STM32F407VE_black] +platform = ${common_stm32.platform} +extends = common_stm32 +board = blackSTM32F407VET6 +build_flags = ${common_stm32.build_flags} + -DARDUINO_BLACK_F407VE + -DUSBD_USE_CDC_COMPOSITE -DUSE_USB_FS +extra_scripts = ${common.extra_scripts} + pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py + +# +# Anet ET4-MB_V1.x/ET4P-MB_V1.x (STM32F407VGT6 ARM Cortex-M4) +# For use with with davidtgbe's OpenBLT bootloader https://github.com/davidtgbe/openblt/releases +# Comment out board_build.offset = 0x10000 if you don't plan to use OpenBLT/flashing directly to 0x08000000. +# +[env:Anet_ET4_OpenBLT] +platform = ${common_stm32.platform} +extends = common_stm32 +build_flags = ${common_stm32.build_flags} -DHAL_SD_MODULE_ENABLED -DHAL_SRAM_MODULE_ENABLED +board = genericSTM32F407VGT6 +board_build.core = stm32 +board_build.variant = MARLIN_F4x7Vx +board_build.ldscript = ldscript.ld +board_build.firmware = firmware.srec +# Just openblt.py (not stm32_bootloader.py) generates the file +board_build.encrypt = Yes +board_build.offset = 0x10000 +board_upload.offset_address = 0x08010000 +build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 +debug_tool = jlink +upload_protocol = jlink +extra_scripts = ${common.extra_scripts} + pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py + buildroot/share/PlatformIO/scripts/stm32_bootloader.py + buildroot/share/PlatformIO/scripts/openblt.py + +# +# BigTreeTech SKR Pro (STM32F407ZGT6 ARM Cortex-M4) +# +[env:BIGTREE_SKR_PRO] +platform = ${common_stm32.platform} +extends = common_stm32 +board = BigTree_SKR_Pro +build_flags = ${common_stm32.build_flags} + -DSTM32F407_5ZX -DVECT_TAB_OFFSET=0x8000 +extra_scripts = ${common.extra_scripts} + pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py +#upload_protocol = stlink +#upload_command = "$PROJECT_PACKAGES_DIR/tool-stm32duino/stlink/ST-LINK_CLI.exe" -c SWD -P "$BUILD_DIR/firmware.bin" 0x8008000 -Rst -Run +debug_tool = stlink +debug_init_break = + +# +# USB Flash Drive mix-ins for STM32 +# +[stm_flash_drive] +platform_packages = framework-arduinoststm32@https://github.com/rhapsodyv/Arduino_Core_STM32/archive/usb-host-msc.zip +build_flags = ${common_stm32.build_flags} + -DHAL_PCD_MODULE_ENABLED -DHAL_HCD_MODULE_ENABLED + -DUSBHOST -DUSBH_IRQ_PRIO=3 -DUSBH_IRQ_SUBPRIO=4 + +# +# BigTreeTech SKR Pro (STM32F407ZGT6 ARM Cortex-M4) with USB Flash Drive Support +# +[env:BIGTREE_SKR_PRO_usb_flash_drive] +extends = env:BIGTREE_SKR_PRO +platform_packages = ${stm_flash_drive.platform_packages} +build_unflags = -DUSBCON -DUSBD_USE_CDC +build_flags = ${stm_flash_drive.build_flags} + -DSTM32F407_5ZX -DVECT_TAB_OFFSET=0x8000 + +# +# Bigtreetech GTR V1.0 (STM32F407IGT6 ARM Cortex-M4) +# +[env:BIGTREE_GTR_V1_0] +platform = ${common_stm32.platform} +extends = common_stm32 +board = BigTree_GTR_v1 +extra_scripts = ${common.extra_scripts} + pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py +build_flags = ${common_stm32.build_flags} + -DSTM32F407IX -DVECT_TAB_OFFSET=0x8000 + +# +# Bigtreetech GTR V1.0 (STM32F407IGT6 ARM Cortex-M4) with USB Flash Drive Support +# +[env:BIGTREE_GTR_V1_0_usb_flash_drive] +extends = env:BIGTREE_GTR_V1_0 +platform_packages = ${stm_flash_drive.platform_packages} +build_unflags = -DUSBCON -DUSBD_USE_CDC +build_flags = ${stm_flash_drive.build_flags} + -DSTM32F407IX -DVECT_TAB_OFFSET=0x8000 + +# +# BigTreeTech BTT002 V1.0 (STM32F407VGT6 ARM Cortex-M4) +# +[env:BIGTREE_BTT002] +platform = ${common_stm32.platform} +extends = common_stm32 +board = BigTree_Btt002 +build_flags = ${common_stm32.build_flags} + -DSTM32F407_5VX -DVECT_TAB_OFFSET=0x8000 + -DHAVE_HWSERIAL2 + -DHAVE_HWSERIAL3 + -DPIN_SERIAL2_RX=PD_6 + -DPIN_SERIAL2_TX=PD_5 +extra_scripts = ${common.extra_scripts} + pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py + +# +# Lerdge base +# +[lerdge_common] +platform = ${common_stm32.platform} +extends = common_stm32 +board = LERDGE +board_build.offset = 0x10000 +board_build.encrypt = Yes +extra_scripts = ${common.extra_scripts} + pre:buildroot/share/PlatformIO/scripts/copy_marlin_variant_to_framework.py + buildroot/share/PlatformIO/scripts/stm32_bootloader.py + buildroot/share/PlatformIO/scripts/lerdge.py +build_flags = ${common_stm32.build_flags} + -DSTM32F4 -DSTM32F4xx -DTARGET_STM32F4 + -DDISABLE_GENERIC_SERIALUSB -DARDUINO_ARCH_STM32 -DARDUINO_LERDGE + -DHAL_SRAM_MODULE_ENABLED +build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 + +# +# Lerdge X +# +[env:LERDGEX] +platform = ${lerdge_common.platform} +extends = lerdge_common +board_build.firmware = Lerdge_X_firmware_force.bin + +# +# Lerdge X with USB Flash Drive Support +# +[env:LERDGEX_usb_flash_drive] +platform = ${env:LERDGEX.platform} +extends = env:LERDGEX +platform_packages = ${stm_flash_drive.platform_packages} +build_flags = ${stm_flash_drive.build_flags} + +# +# Lerdge S +# +[env:LERDGES] +platform = ${lerdge_common.platform} +extends = lerdge_common +board_build.firmware = Lerdge_firmware_force.bin + +# +# Lerdge S with USB Flash Drive Support +# +[env:LERDGES_usb_flash_drive] +platform = ${env:LERDGES.platform} +extends = env:LERDGES +platform_packages = ${stm_flash_drive.platform_packages} +build_flags = ${stm_flash_drive.build_flags} + +# +# Lerdge K +# +[env:LERDGEK] +platform = ${lerdge_common.platform} +extends = lerdge_common +board_build.firmware = Lerdge_K_firmware_force.bin +build_flags = ${lerdge_common.build_flags} + -DLERDGEK + +# +# Lerdge K with USB Flash Drive Support +# +[env:LERDGEK_usb_flash_drive] +platform = ${env:LERDGEK.platform} +extends = env:LERDGEK +platform_packages = ${stm_flash_drive.platform_packages} +build_flags = ${stm_flash_drive.build_flags} + +# +# RUMBA32 +# +[env:rumba32] +platform = ${common_stm32.platform} +extends = common_stm32 +build_flags = ${common_stm32.build_flags} + -Os + -DHAL_PCD_MODULE_ENABLED + -DDISABLE_GENERIC_SERIALUSB + -DHAL_UART_MODULE_ENABLED + -DTIMER_SERIAL=TIM9 +board = rumba32_f446ve +upload_protocol = dfu +monitor_speed = 500000 + +# +# MKS Robin Pro V2 +# +[env:mks_robin_pro2] +platform = ${common_stm32.platform} +platform_packages = ${stm_flash_drive.platform_packages} +extends = common_stm32 +build_flags = ${stm_flash_drive.build_flags} +board = genericSTM32F407VET6 +board_build.core = stm32 +board_build.variant = MARLIN_F4x7Vx +board_build.ldscript = ldscript.ld +board_build.firmware = firmware.bin +board_build.offset = 0x0000 +board_upload.offset_address = 0x08000000 +build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC +debug_tool = jlink +upload_protocol = jlink +extra_scripts = ${common.extra_scripts} + pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py + buildroot/share/PlatformIO/scripts/stm32_bootloader.py + +# +# This SPI is used by Robin Nano V3 +# +[stm32f4_I2C1] +build_flags = -DPIN_WIRE_SCL=PB6 -DPIN_WIRE_SDA=PB7 + +# +# MKS Robin Nano V3 +# +[env:mks_robin_nano_v3] +platform = ${common_stm32.platform} +extends = common_stm32 +build_flags = ${common_stm32.build_flags} ${stm32f4_I2C1.build_flags} -DHAL_PCD_MODULE_ENABLED -DUSBCON -DUSBD_USE_CDC +board = genericSTM32F407VGT6 +board_build.core = stm32 +board_build.variant = MARLIN_F4x7Vx +board_build.ldscript = ldscript.ld +board_build.firmware = Robin_nano_v3.bin +board_build.offset = 0xC000 +board_upload.offset_address = 0x0800C000 +build_unflags = ${common_stm32.build_unflags} +debug_tool = jlink +upload_protocol = jlink +extra_scripts = ${common.extra_scripts} + pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py + buildroot/share/PlatformIO/scripts/stm32_bootloader.py + +# +# MKS Robin Nano V3 with USB Flash Drive Support +# Currently, using a STM32duino fork, until USB Host get merged +# +[env:mks_robin_nano_v3_usb_flash_drive] +extends = env:mks_robin_nano_v3 +platform_packages = ${stm_flash_drive.platform_packages} +build_flags = ${stm_flash_drive.build_flags} ${stm32f4_I2C1.build_flags} + -DUSBCON + -DUSE_USBHOST_HS + -DUSBD_IRQ_PRIO=5 + -DUSBD_IRQ_SUBPRIO=6 + -DUSE_USB_HS_IN_FS + -DUSBD_USE_CDC + +# +# MKS Robin Nano V3 with USB Flash Drive Support and Shared Media +# Currently, using a STM32duino fork, until USB Host and USB Device MSC get merged +# +[env:mks_robin_nano_v3_usb_flash_drive_msc] +platform = ${common_stm32.platform} +extends = env:mks_robin_nano_v3 +platform_packages = framework-arduinoststm32@https://github.com/rhapsodyv/Arduino_Core_STM32/archive/usb-host-msc-cdc-msc.zip +build_unflags = ${common_stm32.build_unflags} -DUSBD_USE_CDC +build_flags = ${stm_flash_drive.build_flags} ${stm32f4_I2C1.build_flags} + -DUSBCON + -DUSE_USBHOST_HS + -DUSBD_IRQ_PRIO=5 + -DUSBD_IRQ_SUBPRIO=6 + -DUSE_USB_HS_IN_FS + -DUSBD_USE_CDC_MSC diff --git a/ini/stm32f7.ini b/ini/stm32f7.ini new file mode 100644 index 000000000..442ef5f9b --- /dev/null +++ b/ini/stm32f7.ini @@ -0,0 +1,30 @@ +# +# Marlin Firmware +# PlatformIO Configuration File +# + +################################# +# # +# STM32F7 Architecture # +# # +################################# + +# +# ST NUCLEO-F767ZI Development Board +# This environment is for testing purposes prior to control boards +# being readily available based on STM32F7 MCUs +# +[env:NUCLEO_F767ZI] +platform = ${common_stm32.platform} +extends = common_stm32 +board = nucleo_f767zi +build_flags = ${common_stm32.build_flags} -DTIMER_SERIAL=TIM9 + +# +# REMRAM_V1 +# +[env:REMRAM_V1] +platform = ${common_stm32.platform} +extends = common_stm32 +board = remram_v1 +build_flags = ${common_stm32.build_flags} diff --git a/ini/teensy.ini b/ini/teensy.ini new file mode 100644 index 000000000..ae33cc7a0 --- /dev/null +++ b/ini/teensy.ini @@ -0,0 +1,42 @@ +# +# Marlin Firmware +# PlatformIO Configuration File +# + +################################# +# # +# Teensy Architectures # +# # +################################# + +# +# Teensy 3.1 / 3.2 (ARM Cortex-M4) +# +[env:teensy31] +platform = teensy +board = teensy31 +src_filter = ${common.default_src_filter} + +lib_ignore = NativeEthernet + +# +# Teensy 3.5 / 3.6 (ARM Cortex-M4) +# +[env:teensy35] +platform = teensy +board = teensy35 +src_filter = ${common.default_src_filter} + +lib_ignore = NativeEthernet + +[env:teensy36] +platform = teensy +board = teensy36 +src_filter = ${common.default_src_filter} + +lib_ignore = NativeEthernet + +# +# Teensy 4.0 / 4.1 (ARM Cortex-M7) +# +[env:teensy41] +platform = teensy +board = teensy41 +src_filter = ${common.default_src_filter} + diff --git a/platformio.ini b/platformio.ini index 26b27bbf9..913bb44ae 100644 --- a/platformio.ini +++ b/platformio.ini @@ -20,6 +20,19 @@ src_dir = Marlin boards_dir = buildroot/share/PlatformIO/boards default_envs = mega2560 include_dir = Marlin +extra_configs = + ini/avr.ini + ini/due.ini + ini/esp32.ini + ini/features.ini + ini/lpc176x.ini + ini/native.ini + ini/samd51.ini + ini/stm32f0.ini + ini/stm32f1.ini + ini/stm32f4.ini + ini/stm32f7.ini + ini/teensy.ini # # The 'common' values are used for most Marlin builds @@ -222,217 +235,6 @@ extra_scripts = build_flags = -fmax-errors=5 -g3 -D__MARLIN_FIRMWARE__ -fmerge-constants lib_deps = -# -# Feature Dependencies -# -[features] -YHCB2004 = red-scorp/LiquidCrystal_AIP31068@^1.0.4, red-scorp/SoftSPIB@^1.1.1 -HAS_TFT_LVGL_UI = lvgl=https://github.com/makerbase-mks/LVGL-6.1.1-MKS/archive/master.zip - src_filter=+ - extra_scripts=download_mks_assets.py -POSTMORTEM_DEBUGGING = src_filter=+ + - build_flags=-funwind-tables -MKS_WIFI_MODULE = QRCode=https://github.com/makerbase-mks/QRCode/archive/master.zip -HAS_TRINAMIC_CONFIG = TMCStepper@~0.7.1 - src_filter=+ + + + + -HAS_STEALTHCHOP = src_filter=+ -SR_LCD_3W_NL = SailfishLCD=https://github.com/mikeshub/SailfishLCD/archive/master.zip -HAS_MOTOR_CURRENT_I2C = SlowSoftI2CMaster - src_filter=+ -HAS_TMC26X = TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip - src_filter=+ -HAS_L64XX = Arduino-L6470@0.8.0 - src_filter=+ + + + -NEOPIXEL_LED = Adafruit NeoPixel@1.5.0 - src_filter=+ -TEMP_.+_IS_MAX31865 = Adafruit MAX31865 library@~1.1.0 -USES_LIQUIDCRYSTAL = bitbucket-fmalpartida/LiquidCrystal@1.5.0 -USES_LIQUIDCRYSTAL_I2C = marcoschwartz/LiquidCrystal_I2C@1.1.4 -USES_LIQUIDTWI2 = LiquidTWI2@1.2.7 -HAS_WIRED_LCD = src_filter=+ -HAS_MARLINUI_HD44780 = src_filter=+ -HAS_MARLINUI_U8GLIB = U8glib-HAL@~0.4.1 - src_filter=+ -HAS_(FSMC|SPI)_TFT = src_filter=+ + + -HAS_FSMC_TFT = src_filter=+ + -HAS_SPI_TFT = src_filter=+ + -I2C_EEPROM = src_filter=+ -SPI_EEPROM = src_filter=+ -HAS_GRAPHICAL_TFT = src_filter=+ -DWIN_CREALITY_LCD = src_filter=+ -IS_TFTGLCD_PANEL = src_filter=+ -HAS_TOUCH_BUTTONS = src_filter=+ -HAS_LCD_MENU = src_filter=+ -HAS_GAMES = src_filter=+ -MARLIN_BRICKOUT = src_filter=+ -MARLIN_INVADERS = src_filter=+ -MARLIN_MAZE = src_filter=+ -MARLIN_SNAKE = src_filter=+ -HAS_MENU_BACKLASH = src_filter=+ -HAS_MENU_BED_CORNERS = src_filter=+ -LCD_BED_LEVELING = src_filter=+ -HAS_MENU_CANCELOBJECT = src_filter=+ -HAS_MENU_DELTA_CALIBRATE = src_filter=+ -HAS_MENU_FILAMENT = src_filter=+ -LCD_INFO_MENU = src_filter=+ -HAS_MENU_JOB_RECOVERY = src_filter=+ -HAS_MULTI_LANGUAGE = src_filter=+ -HAS_MENU_LED = src_filter=+ -HAS_MENU_MEDIA = src_filter=+ -HAS_MENU_MIXER = src_filter=+ -HAS_MENU_MMU2 = src_filter=+ -HAS_MENU_PASSWORD = src_filter=+ -HAS_MENU_POWER_MONITOR = src_filter=+ -HAS_MENU_CUTTER = src_filter=+ -HAS_MENU_TEMPERATURE = src_filter=+ -HAS_MENU_TMC = src_filter=+ -HAS_MENU_TOUCH_SCREEN = src_filter=+ -HAS_MENU_TRAMMING = src_filter=+ -HAS_MENU_UBL = src_filter=+ -ANYCUBIC_LCD_CHIRON = src_filter=+ + -ANYCUBIC_LCD_I3MEGA = src_filter=+ + -NEXTION_TFT = src_filter=+ + -HAS_DGUS_LCD = src_filter=+ + -DGUS_LCD_UI_FYSETC = src_filter=+ -DGUS_LCD_UI_HIPRECY = src_filter=+ -DGUS_LCD_UI_MKS = src_filter=+ -DGUS_LCD_UI_ORIGIN = src_filter=+ -TOUCH_UI_FTDI_EVE = src_filter=+ -EXTUI_EXAMPLE = src_filter=+ -MALYAN_LCD = src_filter=+ -USE_UHS2_USB = src_filter=+ -USE_UHS3_USB = src_filter=+ -USB_FLASH_DRIVE_SUPPORT = src_filter=+ -AUTO_BED_LEVELING_BILINEAR = src_filter=+ -AUTO_BED_LEVELING_(3POINT|(BI)?LINEAR) = src_filter=+ -MESH_BED_LEVELING = src_filter=+ + -AUTO_BED_LEVELING_UBL = src_filter=+ + -UBL_HILBERT_CURVE = src_filter=+ -BACKLASH_COMPENSATION = src_filter=+ -BARICUDA = src_filter=+ + -BINARY_FILE_TRANSFER = src_filter=+ + -BLTOUCH = src_filter=+ -CANCEL_OBJECTS = src_filter=+ + -CASE_LIGHT_ENABLE = src_filter=+ + -EXTERNAL_CLOSED_LOOP_CONTROLLER = src_filter=+ + -USE_CONTROLLER_FAN = src_filter=+ -HAS_MOTOR_CURRENT_DAC = src_filter=+ -DIRECT_STEPPING = src_filter=+ + -EMERGENCY_PARSER = src_filter=+ - -I2C_POSITION_ENCODERS = src_filter=+ -IIC_BL24CXX_EEPROM = src_filter=+ -HAS_SPI_FLASH = src_filter=+ -HAS_ETHERNET = src_filter=+ + -HAS_FANMUX = src_filter=+ -FILAMENT_WIDTH_SENSOR = src_filter=+ + -FWRETRACT = src_filter=+ + -HOST_ACTION_COMMANDS = src_filter=+ -HOTEND_IDLE_TIMEOUT = src_filter=+ -JOYSTICK = src_filter=+ -BLINKM = src_filter=+ -HAS_COLOR_LEDS = src_filter=+ + -PCA9533 = src_filter=+ -PCA9632 = src_filter=+ -PRINTER_EVENT_LEDS = src_filter=+ -TEMP_STAT_LEDS = src_filter=+ -MAX7219_DEBUG = src_filter=+ + -HAS_MEATPACK = src_filter=+ -MIXING_EXTRUDER = src_filter=+ + -HAS_PRUSA_MMU1 = src_filter=+ -HAS_PRUSA_MMU2 = src_filter=+ + -PASSWORD_FEATURE = src_filter=+ + -ADVANCED_PAUSE_FEATURE = src_filter=+ + + -AUTO_POWER_CONTROL = src_filter=+ -HAS_POWER_MONITOR = src_filter=+ + -POWER_LOSS_RECOVERY = src_filter=+ + -PROBE_TEMP_COMPENSATION = src_filter=+ + -HAS_FILAMENT_SENSOR = src_filter=+ + -(EXT|MANUAL)_SOLENOID.* = src_filter=+ + -MK2_MULTIPLEXER = src_filter=+ -HAS_CUTTER = src_filter=+ + -EXPERIMENTAL_I2CBUS = src_filter=+ + -MECHANICAL_GANTRY_CAL.+ = src_filter=+ -Z_MULTI_ENDSTOPS = src_filter=+ -Z_STEPPER_AUTO_ALIGN = src_filter=+ + -G26_MESH_VALIDATION = src_filter=+ -ASSISTED_TRAMMING = src_filter=+ + -HAS_MESH = src_filter=+ -HAS_LEVELING = src_filter=+ + -DELTA_AUTO_CALIBRATION = src_filter=+ -CALIBRATION_GCODE = src_filter=+ -Z_MIN_PROBE_REPEATABILITY_TEST = src_filter=+ -M100_FREE_MEMORY_WATCHER = src_filter=+ -BACKLASH_GCODE = src_filter=+ -IS_KINEMATIC = src_filter=+ -HAS_EXTRA_ENDSTOPS = src_filter=+ -SKEW_CORRECTION_GCODE = src_filter=+ -DIRECT_PIN_CONTROL = src_filter=+ + -PINS_DEBUGGING = src_filter=+ -NO_VOLUMETRICS = src_filter=- -HAS_MULTI_EXTRUDER = src_filter=+ -HAS_HOTEND_OFFSET = src_filter=+ -EDITABLE_SERVO_ANGLES = src_filter=+ -PIDTEMP = src_filter=+ -PREVENT_COLD_EXTRUSION = src_filter=+ -PIDTEMPBED = src_filter=+ -HAS_USER_THERMISTORS = src_filter=+ -SD_ABORT_ON_ENDSTOP_HIT = src_filter=+ -BAUD_RATE_GCODE = src_filter=+ -HAS_SMART_EFF_MOD = src_filter=+ -COOLANT_CONTROL = src_filter=+ -HAS_SOFTWARE_ENDSTOPS = src_filter=+ -HAS_DUPLICATION_MODE = src_filter=+ -LIN_ADVANCE = src_filter=+ -PHOTO_GCODE = src_filter=+ -CONTROLLER_FAN_EDITABLE = src_filter=+ -GCODE_MACROS = src_filter=+ -GRADIENT_MIX = src_filter=+ -HAS_SAVED_POSITIONS = src_filter=+ + -PARK_HEAD_ON_PAUSE = src_filter=+ -FILAMENT_LOAD_UNLOAD_GCODES = src_filter=+ -CNC_WORKSPACE_PLANES = src_filter=+ -CNC_COORDINATE_SYSTEMS = src_filter=+ -HAS_M206_COMMAND = src_filter=+ -EXPECTED_PRINTER_CHECK = src_filter=+ -HOST_KEEPALIVE_FEATURE = src_filter=+ -REPETIER_GCODE_M360 = src_filter=+ -HAS_GCODE_M876 = src_filter=+ -HAS_RESUME_CONTINUE = src_filter=+ -HAS_LCD_CONTRAST = src_filter=+ -LCD_SET_PROGRESS_MANUALLY = src_filter=+ -TOUCH_SCREEN_CALIBRATION = src_filter=+ -ARC_SUPPORT = src_filter=+ -GCODE_MOTION_MODES = src_filter=+ -BABYSTEPPING = src_filter=+ + -Z_PROBE_SLED = src_filter=+ -G38_PROBE_TARGET = src_filter=+ -MAGNETIC_PARKING_EXTRUDER = src_filter=+ -SDSUPPORT = src_filter=+ + + + + + + -HAS_MEDIA_SUBCALLS = src_filter=+ -GCODE_REPEAT_MARKERS = src_filter=+ + -HAS_EXTRUDERS = src_filter=+ + -HAS_COOLER = src_filter=+ + -AUTO_REPORT_TEMPERATURES = src_filter=+ -INCH_MODE_SUPPORT = src_filter=+ -TEMPERATURE_UNITS_SUPPORT = src_filter=+ -NEED_HEX_PRINT = src_filter=+ -NEED_LSF = src_filter=+ -NOZZLE_PARK_FEATURE = src_filter=+ + -NOZZLE_CLEAN_FEATURE = src_filter=+ + -DELTA = src_filter=+ + -BEZIER_CURVE_SUPPORT = src_filter=+ + -PRINTCOUNTER = src_filter=+ -HAS_BED_PROBE = src_filter=+ + + + -IS_SCARA = src_filter=+ -HAS_SERVOS = src_filter=+ + -MORGAN_SCARA = src_filter=+ -HAS_MICROSTEPS = src_filter=+ -(ESP3D_)?WIFISUPPORT = AsyncTCP, ESP Async WebServer - ESP3DLib=https://github.com/luc-github/ESP3DLib/archive/master.zip - arduinoWebSockets=links2004/WebSockets@2.3.4 - luc-github/ESP32SSDP@^1.1.1 - lib_ignore=ESPAsyncTCP - # # Default values apply to all 'env:' prefixed environments # @@ -452,1208 +254,6 @@ monitor_flags = --filter time -################################# -# # -# Unique Core Architectures # -# # -# Add a new "env" below if no # -# entry has values suitable to # -# build for a given board. # -# # -################################# - -################################# -# # -# AVR Architecture # -# # -################################# - -# -# AVR (8-bit) Common Environment values -# -[common_avr8] -board_build.f_cpu = 16000000L -src_filter = ${common.default_src_filter} + - -# -# ATmega2560 -# -[env:mega2560] -platform = atmelavr -extends = common_avr8 -board = megaatmega2560 - -# -# ATmega2560 with extended pins 70-85 defined -# BOARD_BQ_ZUM_MEGA_3D -# BOARD_ULTIMAIN_2 -# BOARD_MIGHTYBOARD_REVE -# BOARD_EINSTART_S -# -[env:mega2560ext] -platform = atmelavr -extends = env:mega2560 -board_build.variant = megaextendedpins -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/copy_marlin_variant_to_framework.py - -# -# ATmega1280 -# -[env:mega1280] -platform = atmelavr -extends = common_avr8 -board = megaatmega1280 - -# -# MightyBoard AVR with extended pins -# -[mega_extended_optimized] -extends = common_avr8 -board_build.variant = megaextendedpins -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/copy_marlin_variant_to_framework.py -upload_speed = 57600 -build_flags = ${common.build_flags} -fno-tree-scev-cprop -fno-split-wide-types -Wl,--relax -mcall-prologues - -# -# MightyBoard ATmega1280 -# -[env:MightyBoard1280] -platform = atmelavr -extends = mega_extended_optimized -board = megaatmega1280 - -# -# MightyBoard ATmega2560 -# -[env:MightyBoard2560] -platform = atmelavr -extends = mega_extended_optimized -board = megaatmega2560 - -# -# RAMBo -# -[env:rambo] -platform = atmelavr -extends = common_avr8 -board = reprap_rambo - -# -# FYSETC F6 V1.3 / V1.4 -# -[env:FYSETC_F6] -platform = atmelavr -extends = common_avr8 -board = fysetc_f6 - -# -# Sanguinololu (ATmega644p) -# -[env:sanguino644p] -platform = atmelavr -extends = common_avr8 -board = sanguino_atmega644p - -# -# Sanguinololu (ATmega1284p) -# -[env:sanguino1284p] -platform = atmelavr -extends = common_avr8 -board = sanguino_atmega1284p -board_upload.maximum_size = 126976 - -# -# Melzi and clones (ATmega1284p) -# -[env:melzi] -platform = atmelavr -extends = env:sanguino1284p -upload_speed = 57600 - -# -# Sanguinololu (ATmega1284p stock bootloader with tuned flags) -# - -[tuned_1284p] -build_flags = ${common.build_flags} -fno-tree-scev-cprop -fno-split-wide-types -Wl,--relax -mcall-prologues - -[env:sanguino1284p_optimized] -platform = atmelavr -extends = env:melzi -build_flags = ${tuned_1284p.build_flags} - -# -# Melzi and clones (alias for sanguino1284p_optimized) -# -[env:melzi_optimized] -platform = atmelavr -extends = env:sanguino1284p_optimized - -# -# Melzi and clones (Optiboot bootloader) -# -[env:melzi_optiboot] -platform = atmelavr -extends = common_avr8 -board = sanguino_atmega1284p -upload_speed = 115200 - -# -# Melzi and clones (Zonestar Melzi2 with tuned flags) -# -[env:melzi_optiboot_optimized] -platform = atmelavr -extends = env:melzi_optiboot -build_flags = ${tuned_1284p.build_flags} - -# -# AT90USB1286 boards using CDC bootloader -# - BRAINWAVE -# - BRAINWAVE_PRO -# - SAV_MKI -# - TEENSYLU -# -[env:at90usb1286_cdc] -platform = teensy -extends = common_avr8 -board = at90usb1286 -lib_ignore = ${env:common_avr8.lib_ignore}, Teensy_ADC, NativeEthernet - -# -# AT90USB1286 boards using DFU bootloader -# - Printrboard -# - Printrboard Rev.F -# - ? 5DPRINT ? -# -[env:at90usb1286_dfu] -platform = teensy -extends = env:at90usb1286_cdc - -################################# -# # -# DUE Architecture # -# # -################################# - -# -# Due (Atmel SAM3X8E ARM Cortex-M3) -# -# - RAMPS4DUE -# - RADDS -# -[env:DUE] -platform = atmelsam -board = due -src_filter = ${common.default_src_filter} + + - -[env:DUE_USB] -platform = atmelsam -extends = env:DUE -board = dueUSB - -# -# Archim SAM -# -[common_DUE_archim] -platform = atmelsam -extends = env:DUE -board = archim -build_flags = ${common.build_flags} - -DARDUINO_SAM_ARCHIM -DARDUINO_ARCH_SAM -D__SAM3X8E__ -DUSBCON -board_build.variants_dir = buildroot/share/PlatformIO/variants/ -extra_scripts = ${common.extra_scripts} - Marlin/src/HAL/DUE/upload_extra_script.py - -[env:DUE_archim] -platform = ${common_DUE_archim.platform} -extends = common_DUE_archim - -################################# -# # -# SAMD51 Architecture # -# # -################################# - -# -# Adafruit Grand Central M4 (Atmel SAMD51P20A ARM Cortex-M4) -# -[env:SAMD51_grandcentral_m4] -platform = atmelsam -board = adafruit_grandcentral_m4 -build_flags = ${common.build_flags} -std=gnu++17 -build_unflags = -std=gnu++11 -src_filter = ${common.default_src_filter} + -lib_deps = ${common.lib_deps} - SoftwareSerialM - Adafruit SPIFlash -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/SAMD51_grandcentral_m4.py -custom_marlin.SDSUPPORT = SdFat - Adafruit Fork -debug_tool = jlink - -################################# -# # -# LPC176x Architecture # -# # -################################# - -# -# NXP LPC176x ARM Cortex-M3 -# -[common_LPC] -platform = https://github.com/p3p/pio-nxplpc-arduino-lpc176x/archive/0.1.3.zip -platform_packages = framework-arduino-lpc176x@^0.2.6 -board = nxp_lpc1768 -lib_ldf_mode = off -lib_compat_mode = strict -extra_scripts = ${common.extra_scripts} - Marlin/src/HAL/LPC1768/upload_extra_script.py -src_filter = ${common.default_src_filter} + + -lib_deps = ${common.lib_deps} - Servo -custom_marlin.USES_LIQUIDCRYSTAL = arduino-libraries/LiquidCrystal@~1.0.7 -custom_marlin.NEOPIXEL_LED = Adafruit NeoPixel=https://github.com/p3p/Adafruit_NeoPixel/archive/1.5.0.zip -build_flags = ${common.build_flags} -DU8G_HAL_LINKS -IMarlin/src/HAL/LPC1768/include -IMarlin/src/HAL/LPC1768/u8g - # debug options for backtrace - #-funwind-tables - #-mpoke-function-name - -# -# NXP LPC176x ARM Cortex-M3 -# -[env:LPC1768] -platform = ${common_LPC.platform} -extends = common_LPC -board = nxp_lpc1768 - -[env:LPC1769] -platform = ${common_LPC.platform} -extends = common_LPC -board = nxp_lpc1769 - -################################# -# # -# STM32 Architecture # -# # -################################# - -# -# HAL/STM32 Base Environment values -# -[common_stm32] -platform = ststm32@~12.0 -build_flags = ${common.build_flags} - -std=gnu++14 - -DUSBCON -DUSBD_USE_CDC - -DTIM_IRQ_PRIO=13 - -DADC_RESOLUTION=12 -build_unflags = -std=gnu++11 -src_filter = ${common.default_src_filter} + + - -# -# HAL/STM32F1 Common Environment values -# -[common_stm32f1] -platform = ststm32@~12.0 -board_build.core = maple -build_flags = !python Marlin/src/HAL/STM32F1/build_flags.py - ${common.build_flags} - -DARDUINO_ARCH_STM32 -build_unflags = -std=gnu11 -std=gnu++11 -src_filter = ${common.default_src_filter} + -lib_ignore = SPI, FreeRTOS701, FreeRTOS821 -lib_deps = ${common.lib_deps} - SoftwareSerialM -platform_packages = tool-stm32duino -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/fix_framework_weakness.py - -# -# STM32F103RC -# -[env:STM32F103RC] -platform = ${common_stm32f1.platform} -extends = common_stm32f1 -board = genericSTM32F103RC -monitor_speed = 115200 - -# -# MEEB_3DP (STM32F103RCT6 with 512K) -# -[env:STM32F103RC_meeb] -platform = ${common_stm32f1.platform} -extends = common_stm32f1 -board = MEEB_3DP -build_flags = ${common_stm32f1.build_flags} - -DDEBUG_LEVEL=0 - -DSS_TIMER=4 - -DSTM32_FLASH_SIZE=512 - -DHSE_VALUE=12000000U - -DUSE_USB_COMPOSITE - -DVECT_TAB_OFFSET=0x2000 - -DGENERIC_BOOTLOADER -extra_scripts = ${common_stm32f1.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/STM32F1_create_variant.py - buildroot/share/PlatformIO/scripts/STM32F103RC_MEEB_3DP.py -lib_deps = ${common.lib_deps} - SoftwareSerialM - USBComposite for STM32F1@0.91 -custom_marlin.NEOPIXEL_LED = Adafruit NeoPixel=https://github.com/ccccmagicboy/Adafruit_NeoPixel#meeb_3dp_use -debug_tool = stlink -upload_protocol = dfu - -# -# STM32F103RC_fysetc -# -[env:STM32F103RC_fysetc] -platform = ${common_stm32f1.platform} -extends = env:STM32F103RC -extra_scripts = ${common_stm32f1.extra_scripts} - buildroot/share/PlatformIO/scripts/STM32F103RC_fysetc.py -build_flags = ${common_stm32f1.build_flags} -DDEBUG_LEVEL=0 -lib_ldf_mode = chain -debug_tool = stlink -upload_protocol = serial - -# -# BigTree SKR Mini V1.1 / SKR mini E3 / SKR E3 DIP (STM32F103RCT6 ARM Cortex-M3) -# -# STM32F103RC_btt ............. RCT6 with 256K -# STM32F103RC_btt_USB ......... RCT6 with 256K (USB mass storage) -# STM32F103RC_btt_512K ........ RCT6 with 512K -# STM32F103RC_btt_512K_USB .... RCT6 with 512K (USB mass storage) -# -# WARNING! If you have an SKR Mini v1.1 or an SKR Mini E3 1.0 / 1.2 / 2.0 / DIP -# and experience a printer freeze, re-flash Marlin using the regular (non-512K) -# build option. 256K chips may be re-branded 512K chips, but this means the -# upper 256K is sketchy, and failure is very likely. -# - -[env:STM32F103RC_btt] -platform = ${common_stm32f1.platform} -extends = env:STM32F103RC -extra_scripts = ${common_stm32f1.extra_scripts} - buildroot/share/PlatformIO/scripts/STM32F103RC_SKR_MINI.py -build_flags = ${common_stm32f1.build_flags} - -DDEBUG_LEVEL=0 -DSS_TIMER=4 -monitor_speed = 115200 - -[env:STM32F103RC_btt_USB] -platform = ${common_stm32f1.platform} -extends = env:STM32F103RC_btt -build_flags = ${env:STM32F103RC_btt.build_flags} -DUSE_USB_COMPOSITE -lib_deps = ${env:STM32F103RC_btt.lib_deps} - USBComposite for STM32F1@0.91 - -[env:STM32F103RC_btt_512K] -platform = ${common_stm32f1.platform} -extends = env:STM32F103RC_btt -board_upload.maximum_size=524288 -build_flags = ${env:STM32F103RC_btt.build_flags} -DSTM32_FLASH_SIZE=512 - -[env:STM32F103RC_btt_512K_USB] -platform = ${common_stm32f1.platform} -extends = env:STM32F103RC_btt_512K -build_flags = ${env:STM32F103RC_btt_512K.build_flags} -DUSE_USB_COMPOSITE -lib_deps = ${env:STM32F103RC_btt_512K.lib_deps} - USBComposite for STM32F1@0.91 - -# -# STM32F103RE -# -[env:STM32F103RE] -platform = ${common_stm32f1.platform} -extends = common_stm32f1 -board = genericSTM32F103RE -monitor_speed = 115200 - -# -# STM32F103RE_btt ............. RET6 -# STM32F103RE_btt_USB ......... RET6 (USB mass storage) -# -[env:STM32F103RE_btt] -platform = ${common_stm32f1.platform} -extends = env:STM32F103RE -extra_scripts = ${common_stm32f1.extra_scripts} - buildroot/share/PlatformIO/scripts/STM32F103RE_SKR_E3_DIP.py -build_flags = ${common_stm32f1.build_flags} -DDEBUG_LEVEL=0 -DSS_TIMER=4 -debug_tool = stlink -upload_protocol = stlink - -[env:STM32F103RE_btt_USB] -platform = ${common_stm32f1.platform} -extends = env:STM32F103RE_btt -build_flags = ${env:STM32F103RE_btt.build_flags} -DUSE_USB_COMPOSITE -lib_deps = ${common_stm32f1.lib_deps} - USBComposite for STM32F1@0.91 - -# -# REMRAM_V1 -# -[env:REMRAM_V1] -platform = ${common_stm32.platform} -extends = common_stm32 -board = remram_v1 -build_flags = ${common_stm32.build_flags} - -# -# ST NUCLEO-F767ZI Development Board -# This environment is for testing purposes prior to control boards -# being readily available based on STM32F7 MCUs -# -[env:NUCLEO_F767ZI] -platform = ${common_stm32.platform} -extends = common_stm32 -board = nucleo_f767zi -build_flags = ${common_stm32.build_flags} -DTIMER_SERIAL=TIM9 - -# -# ARMED (STM32) -# -[env:ARMED] -platform = ${common_stm32.platform} -extends = common_stm32 -board = armed_v1 -build_flags = ${common_stm32.build_flags} - -O2 -ffreestanding -fsigned-char -fno-move-loop-invariants -fno-strict-aliasing - -# -# Geeetech GTM32 (STM32F103VET6) -# -[env:STM32F103VE_GTM32] -platform = ${common_stm32f1.platform} -extends = common_stm32f1 -board = genericSTM32F103VE -build_flags = ${common_stm32f1.build_flags} - -ffunction-sections -fdata-sections -nostdlib -MMD - -DMCU_STM32F103VE -DARDUINO_GENERIC_STM32F103V -DARDUINO_ARCH_STM32F1 -DBOARD_generic_stm32f103v - -DDEBUG_LEVEL=DEBUG_NONE -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG=1 -DVECT_TAB_ADDR=0x8000000 - -DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6 -upload_protocol = serial - -# -# Longer 3D board in Alfawise U20 (STM32F103VET6) -# -[env:STM32F103VE_longer] -platform = ${common_stm32f1.platform} -extends = common_stm32f1 -board = genericSTM32F103VE -extra_scripts = ${common_stm32f1.extra_scripts} - buildroot/share/PlatformIO/scripts/STM32F103VE_longer.py -build_flags = ${common_stm32f1.build_flags} - -DMCU_STM32F103VE -DSTM32F1xx -USERIAL_USB -DU20 -DTS_V12 -build_unflags = ${common_stm32f1.build_unflags} - -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG=1 -DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6 - -# -# MKS Robin Mini (STM32F103VET6) -# -[env:mks_robin_mini] -platform = ${common_stm32f1.platform} -extends = common_stm32f1 -board = genericSTM32F103VE -extra_scripts = ${common_stm32f1.extra_scripts} - buildroot/share/PlatformIO/scripts/mks_robin_mini.py -build_flags = ${common_stm32f1.build_flags} - -DMCU_STM32F103VE - -# -# MKS Robin Nano (STM32F103VET6) -# -[env:mks_robin_nano35] -platform = ${common_stm32f1.platform} -extends = common_stm32f1 -board = genericSTM32F103VE -extra_scripts = ${common_stm32f1.extra_scripts} - buildroot/share/PlatformIO/scripts/mks_robin_nano35.py -build_flags = ${common_stm32f1.build_flags} - -DMCU_STM32F103VE -DSS_TIMER=4 -debug_tool = jlink -upload_protocol = jlink - -# -# MKS Robin (STM32F103ZET6) -# -[env:mks_robin] -platform = ${common_stm32f1.platform} -extends = common_stm32f1 -board = genericSTM32F103ZE -extra_scripts = ${common_stm32f1.extra_scripts} - buildroot/share/PlatformIO/scripts/mks_robin.py -build_flags = ${common_stm32f1.build_flags} - -DSS_TIMER=4 -DSTM32_XL_DENSITY - -# MKS Robin (STM32F103ZET6) -# Uses HAL STM32 to support Marlin UI for TFT screen with optional touch panel -# -[env:mks_robin_stm32] -platform = ${common_stm32.platform} -extends = common_stm32 -board = genericSTM32F103ZE -board_build.core = stm32 -board_build.variant = MARLIN_F103Zx -board_build.ldscript = ldscript.ld -board_build.offset = 0x7000 -board_build.encrypt = Yes -board_build.firmware = Robin.bin -build_flags = ${common_stm32.build_flags} - -DENABLE_HWSERIAL3 -DTIMER_SERIAL=TIM5 -build_unflags = ${common_stm32.build_unflags} - -DUSBCON -DUSBD_USE_CDC -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py - buildroot/share/PlatformIO/scripts/stm32_bootloader.py - buildroot/share/PlatformIO/scripts/mks_encrypt.py -lib_deps = - -# -# MKS Robin Pro (STM32F103ZET6) -# -[env:mks_robin_pro] -platform = ${common_stm32f1.platform} -extends = env:mks_robin -extra_scripts = ${common_stm32f1.extra_scripts} - buildroot/share/PlatformIO/scripts/mks_robin_pro.py - -# -# TRIGORILLA PRO (STM32F103ZET6) -# -[env:trigorilla_pro] -platform = ${common_stm32f1.platform} -extends = env:mks_robin -extra_scripts = ${common_stm32f1.extra_scripts} - -# -# MKS Robin E3D (STM32F103RCT6) and -# MKS Robin E3 with TMC2209 -# -[env:mks_robin_e3] -platform = ${common_stm32f1.platform} -extends = common_stm32f1 -board = genericSTM32F103RC -platform_packages = tool-stm32duino -extra_scripts = ${common_stm32f1.extra_scripts} - buildroot/share/PlatformIO/scripts/mks_robin_e3.py -build_flags = ${common_stm32f1.build_flags} - -DDEBUG_LEVEL=0 -DSS_TIMER=4 - -# -# MKS Robin E3p (STM32F103VET6) -# - LVGL UI -# -[env:mks_robin_e3p] -platform = ${common_stm32f1.platform} -extends = common_stm32f1 -board = genericSTM32F103VE -extra_scripts = ${common_stm32f1.extra_scripts} - buildroot/share/PlatformIO/scripts/mks_robin_e3p.py -build_flags = ${common_stm32f1.build_flags} - -DMCU_STM32F103VE -DSS_TIMER=4 -debug_tool = jlink -upload_protocol = jlink - -# -# MKS Robin Lite/Lite2 (STM32F103RCT6) -# -[env:mks_robin_lite] -platform = ${common_stm32f1.platform} -extends = common_stm32f1 -board = genericSTM32F103RC -extra_scripts = ${common_stm32f1.extra_scripts} - buildroot/share/PlatformIO/scripts/mks_robin_lite.py - -# -# MKS ROBIN LITE3 (STM32F103RCT6) -# -[env:mks_robin_lite3] -platform = ${common_stm32f1.platform} -extends = common_stm32f1 -board = genericSTM32F103RC -extra_scripts = ${common_stm32f1.extra_scripts} - buildroot/share/PlatformIO/scripts/mks_robin_lite3.py - -# -# JGAurora A5S A1 (STM32F103ZET6) -# -[env:jgaurora_a5s_a1] -platform = ${common_stm32f1.platform} -extends = common_stm32f1 -board = genericSTM32F103ZE -extra_scripts = ${common_stm32f1.extra_scripts} - buildroot/share/PlatformIO/scripts/jgaurora_a5s_a1_with_bootloader.py -build_flags = ${common_stm32f1.build_flags} - -DSTM32F1xx -DSTM32_XL_DENSITY - -# -# Malyan M200 (STM32F103CB) -# -[env:STM32F103CB_malyan] -platform = ${common_stm32f1.platform} -extends = common_stm32f1 -board = malyanM200 -build_flags = ${common_stm32f1.build_flags} - -DMCU_STM32F103CB -D__STM32F1__=1 -std=c++1y -DSERIAL_USB -ffunction-sections -fdata-sections - -Wl,--gc-sections -DDEBUG_LEVEL=0 -D__MARLIN_FIRMWARE__ -lib_ignore = ${common_stm32f1.lib_ignore} - SoftwareSerialM - -# -# Malyan M200 v2 (STM32F070RB) -# -[env:STM32F070RB_malyan] -platform = ${common_stm32.platform} -extends = common_stm32 -board = malyanM200v2 -build_flags = ${common_stm32.build_flags} -DHAL_PCD_MODULE_ENABLED - -O2 -ffreestanding -fsigned-char -fno-move-loop-invariants -fno-strict-aliasing - -DCUSTOM_STARTUP_FILE - -# -# Malyan M200 v2 (STM32F070CB) -# -[env:STM32F070CB_malyan] -platform = ${common_stm32.platform} -extends = common_stm32 -board = malyanm200_f070cb -build_flags = ${common_stm32.build_flags} - -DHAL_PCD_MODULE_ENABLED -DDISABLE_GENERIC_SERIALUSB -DHAL_UART_MODULE_ENABLED -DCUSTOM_STARTUP_FILE - -# -# Malyan M300 (STM32F070CB) -# -[env:malyan_M300] -platform = ${common_stm32.platform} -extends = common_stm32 -board = malyanm300_f070cb -build_flags = ${common_stm32.build_flags} - -DHAL_PCD_MODULE_ENABLED -DDISABLE_GENERIC_SERIALUSB -DHAL_UART_MODULE_ENABLED -src_filter = ${common.default_src_filter} + - -# -# Chitu boards like Tronxy X5s (STM32F103ZET6) -# -[env:chitu_f103] -platform = ${common_stm32f1.platform} -extends = common_stm32f1 -board = CHITU_F103 -extra_scripts = pre:buildroot/share/PlatformIO/scripts/common-dependencies.py - pre:buildroot/share/PlatformIO/scripts/STM32F1_create_variant.py - buildroot/share/PlatformIO/scripts/chitu_crypt.py -build_flags = ${common_stm32f1.build_flags} - -DSTM32F1xx -DSTM32_XL_DENSITY -build_unflags = ${common_stm32f1.build_unflags} - -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG= -DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6 - -# -# Some Chitu V5 boards have a problem with GPIO init. -# Use this target if G28 or G29 are always failing. -# -[env:chitu_v5_gpio_init] -platform = ${common_stm32f1.platform} -extends = env:chitu_f103 -build_flags = ${env:chitu_f103.build_flags} -DCHITU_V5_Z_MIN_BUGFIX - -# -# Creality (STM32F103RET6) -# -[env:STM32F103RET6_creality] -platform = ${env:STM32F103RE.platform} -extends = env:STM32F103RE -build_flags = ${env:STM32F103RE.build_flags} -DTEMP_TIMER_CHAN=4 -extra_scripts = ${env:STM32F103RE.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/random-bin.py - buildroot/share/PlatformIO/scripts/STM32F103RET6_creality.py -debug_tool = jlink -upload_protocol = jlink - -# -# FLSUN QQS Pro (STM32F103VET6) using hal STM32 -# board Hispeedv1 -# -[env:flsun_hispeedv1] -platform = ${common_stm32.platform} -extends = common_stm32 -build_flags = ${common_stm32.build_flags} -DMCU_STM32F103VE -DSS_TIMER=4 -DENABLE_HWSERIAL3 -board = genericSTM32F103VE -board_build.core = stm32 -board_build.variant = MARLIN_F103Vx -board_build.ldscript = ldscript.ld -board_build.offset = 0x7000 -board_build.firmware = Robin_mini.bin -board_build.encrypt = Yes -board_upload.offset_address = 0x08007000 -build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py - buildroot/share/PlatformIO/scripts/stm32_bootloader.py - buildroot/share/PlatformIO/scripts/mks_encrypt.py - -# -# STM32F401VE -# 'STEVAL-3DP001V1' STM32F401VE board - https://www.st.com/en/evaluation-tools/steval-3dp001v1.html -# -[env:STM32F401VE_STEVAL] -platform = ${common_stm32.platform} -extends = common_stm32 -board = STEVAL_STM32F401VE -build_flags = ${common_stm32.build_flags} - -DARDUINO_STEVAL -DSTM32F401xE - -DDISABLE_GENERIC_SERIALUSB -DUSBD_USE_CDC_COMPOSITE -DUSE_USB_FS -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py - buildroot/share/PlatformIO/scripts/STM32F401VE_STEVAL.py - -# -# STM32F401RC -# -[env:FYSETC_CHEETAH_V20] -platform = ${common_stm32.platform} -extends = common_stm32 -board = FYSETC_CHEETAH_V20 -build_flags = ${common_stm32.build_flags} -DSTM32F401xC -DVECT_TAB_OFFSET=0xC000 -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py - buildroot/share/PlatformIO/scripts/FYSETC_CHEETAH_V20.py - -# -# FLYF407ZG -# -[env:FLYF407ZG] -platform = ${common_stm32.platform} -extends = common_stm32 -board = FLYF407ZG -build_flags = ${common_stm32.build_flags} - -DVECT_TAB_OFFSET=0x8000 -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py - -# -# FLY MINI(stm32f103rct6) -# -[env:FLY_MINI] -platform = ${common_stm32f1.platform} -extends = common_stm32f1 -board = genericSTM32F103RC -extra_scripts = ${common_stm32f1.extra_scripts} - buildroot/share/PlatformIO/scripts/fly_mini.py -build_flags = ${common_stm32f1.build_flags} - -DDEBUG_LEVEL=0 -DSS_TIMER=4 - -# -# FYSETC S6 (STM32F446VET6 ARM Cortex-M4) -# -[env:FYSETC_S6] -platform = ${common_stm32.platform} -extends = common_stm32 -platform_packages = tool-stm32duino -board = marlin_fysetc_s6 -build_flags = ${common_stm32.build_flags} - -DVECT_TAB_OFFSET=0x10000 - -DHAL_PCD_MODULE_ENABLED -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py -debug_tool = stlink -upload_protocol = dfu -upload_command = dfu-util -a 0 -s 0x08010000:leave -D "$SOURCE" - -# -# STM32F407VET6 with RAMPS-like shield -# 'Black' STM32F407VET6 board - https://wiki.stm32duino.com/index.php?title=STM32F407 -# Shield - https://github.com/jmz52/Hardware -# -[env:STM32F407VE_black] -platform = ${common_stm32.platform} -extends = common_stm32 -board = blackSTM32F407VET6 -build_flags = ${common_stm32.build_flags} - -DARDUINO_BLACK_F407VE - -DUSBD_USE_CDC_COMPOSITE -DUSE_USB_FS -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py - -# -# Anet ET4-MB_V1.x/ET4P-MB_V1.x (STM32F407VGT6 ARM Cortex-M4) -# For use with with davidtgbe's OpenBLT bootloader https://github.com/davidtgbe/openblt/releases -# Comment out board_build.offset = 0x10000 if you don't plan to use OpenBLT/flashing directly to 0x08000000. -# -[env:Anet_ET4_OpenBLT] -platform = ${common_stm32.platform} -extends = common_stm32 -build_flags = ${common_stm32.build_flags} -DHAL_SD_MODULE_ENABLED -DHAL_SRAM_MODULE_ENABLED -board = genericSTM32F407VGT6 -board_build.core = stm32 -board_build.variant = MARLIN_F4x7Vx -board_build.ldscript = ldscript.ld -board_build.firmware = firmware.srec -# Just openblt.py (not stm32_bootloader.py) generates the file -board_build.encrypt = Yes -board_build.offset = 0x10000 -board_upload.offset_address = 0x08010000 -build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 -debug_tool = jlink -upload_protocol = jlink -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py - buildroot/share/PlatformIO/scripts/stm32_bootloader.py - buildroot/share/PlatformIO/scripts/openblt.py - -# -# BigTreeTech SKR Pro (STM32F407ZGT6 ARM Cortex-M4) -# -[env:BIGTREE_SKR_PRO] -platform = ${common_stm32.platform} -extends = common_stm32 -board = BigTree_SKR_Pro -build_flags = ${common_stm32.build_flags} - -DSTM32F407_5ZX -DVECT_TAB_OFFSET=0x8000 -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py -#upload_protocol = stlink -#upload_command = "$PROJECT_PACKAGES_DIR/tool-stm32duino/stlink/ST-LINK_CLI.exe" -c SWD -P "$BUILD_DIR/firmware.bin" 0x8008000 -Rst -Run -debug_tool = stlink -debug_init_break = - -# -# USB Flash Drive mix-ins for STM32 -# -[stm32_flash_drive] -platform_packages = framework-arduinoststm32@https://github.com/rhapsodyv/Arduino_Core_STM32/archive/usb-host-msc.zip -build_flags = ${common_stm32.build_flags} - -DHAL_PCD_MODULE_ENABLED -DHAL_HCD_MODULE_ENABLED - -DUSBHOST -DUSBH_IRQ_PRIO=3 -DUSBH_IRQ_SUBPRIO=4 - -# -# BigTreeTech SKR Pro (STM32F407ZGT6 ARM Cortex-M4) with USB Flash Drive Support -# -[env:BIGTREE_SKR_PRO_usb_flash_drive] -extends = env:BIGTREE_SKR_PRO -platform_packages = ${stm32_flash_drive.platform_packages} -build_unflags = -DUSBCON -DUSBD_USE_CDC -build_flags = ${stm32_flash_drive.build_flags} - -DSTM32F407_5ZX -DVECT_TAB_OFFSET=0x8000 - -# -# Bigtreetech GTR V1.0 (STM32F407IGT6 ARM Cortex-M4) -# -[env:BIGTREE_GTR_V1_0] -platform = ${common_stm32.platform} -extends = common_stm32 -board = BigTree_GTR_v1 -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py -build_flags = ${common_stm32.build_flags} - -DSTM32F407IX -DVECT_TAB_OFFSET=0x8000 - -# -# Bigtreetech GTR V1.0 (STM32F407IGT6 ARM Cortex-M4) with USB Flash Drive Support -# -[env:BIGTREE_GTR_V1_0_usb_flash_drive] -extends = env:BIGTREE_GTR_V1_0 -platform_packages = ${stm32_flash_drive.platform_packages} -build_unflags = -DUSBCON -DUSBD_USE_CDC -build_flags = ${stm32_flash_drive.build_flags} - -DSTM32F407IX -DVECT_TAB_OFFSET=0x8000 - -# -# BigTreeTech BTT002 V1.0 (STM32F407VGT6 ARM Cortex-M4) -# -[env:BIGTREE_BTT002] -platform = ${common_stm32.platform} -extends = common_stm32 -board = BigTree_Btt002 -build_flags = ${common_stm32.build_flags} - -DSTM32F407_5VX -DVECT_TAB_OFFSET=0x8000 - -DHAVE_HWSERIAL2 - -DHAVE_HWSERIAL3 - -DPIN_SERIAL2_RX=PD_6 - -DPIN_SERIAL2_TX=PD_5 -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py - -# -# Lerdge base -# -[lerdge_common] -platform = ${common_stm32.platform} -extends = common_stm32 -board = LERDGE -board_build.offset = 0x10000 -board_build.encrypt = Yes -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/copy_marlin_variant_to_framework.py - buildroot/share/PlatformIO/scripts/stm32_bootloader.py - buildroot/share/PlatformIO/scripts/lerdge.py -build_flags = ${common_stm32.build_flags} - -DSTM32F4 -DSTM32F4xx -DTARGET_STM32F4 - -DDISABLE_GENERIC_SERIALUSB -DARDUINO_ARCH_STM32 -DARDUINO_LERDGE - -DHAL_SRAM_MODULE_ENABLED -build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 - -# -# Lerdge X -# -[env:LERDGEX] -platform = ${lerdge_common.platform} -extends = lerdge_common -board_build.firmware = Lerdge_X_firmware_force.bin - -# -# Lerdge X with USB Flash Drive Support -# -[env:LERDGEX_usb_flash_drive] -platform = ${env:LERDGEX.platform} -extends = env:LERDGEX -platform_packages = ${stm32_flash_drive.platform_packages} -build_flags = ${stm32_flash_drive.build_flags} - -# -# Lerdge S -# -[env:LERDGES] -platform = ${lerdge_common.platform} -extends = lerdge_common -board_build.firmware = Lerdge_firmware_force.bin - -# -# Lerdge S with USB Flash Drive Support -# -[env:LERDGES_usb_flash_drive] -platform = ${env:LERDGES.platform} -extends = env:LERDGES -platform_packages = ${stm32_flash_drive.platform_packages} -build_flags = ${stm32_flash_drive.build_flags} - -# -# Lerdge K -# -[env:LERDGEK] -platform = ${lerdge_common.platform} -extends = lerdge_common -board_build.firmware = Lerdge_K_firmware_force.bin -build_flags = ${lerdge_common.build_flags} - -DLERDGEK - -# -# Lerdge K with USB Flash Drive Support -# -[env:LERDGEK_usb_flash_drive] -platform = ${env:LERDGEK.platform} -extends = env:LERDGEK -platform_packages = ${stm32_flash_drive.platform_packages} -build_flags = ${stm32_flash_drive.build_flags} - -# -# RUMBA32 -# -[env:rumba32] -platform = ${common_stm32.platform} -extends = common_stm32 -build_flags = ${common_stm32.build_flags} - -Os - -DHAL_PCD_MODULE_ENABLED - -DDISABLE_GENERIC_SERIALUSB - -DHAL_UART_MODULE_ENABLED - -DTIMER_SERIAL=TIM9 -board = rumba32_f446ve -upload_protocol = dfu -monitor_speed = 500000 - -# -# MKS Robin Nano V1.2 and V2 using hal STM32 -# -[env:mks_robin_nano35_stm32] -platform = ${common_stm32.platform} -extends = common_stm32 -build_flags = ${common_stm32.build_flags} -DMCU_STM32F103VE -DSS_TIMER=4 -DENABLE_HWSERIAL3 -board = genericSTM32F103VE -board_build.core = stm32 -board_build.variant = MARLIN_F103Vx -board_build.ldscript = ldscript.ld -board_build.offset = 0x7000 -board_build.encrypt = Yes -board_build.firmware = Robin_nano35.bin -board_upload.offset_address = 0x08007000 -build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC -debug_tool = jlink -upload_protocol = jlink -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py - buildroot/share/PlatformIO/scripts/stm32_bootloader.py - buildroot/share/PlatformIO/scripts/mks_encrypt.py - -# -# MKS Robin Pro V2 -# -[env:mks_robin_pro2] -platform = ${common_stm32.platform} -platform_packages = ${stm32_flash_drive.platform_packages} -extends = common_stm32 -build_flags = ${stm32_flash_drive.build_flags} -board = genericSTM32F407VET6 -board_build.core = stm32 -board_build.variant = MARLIN_F4x7Vx -board_build.ldscript = ldscript.ld -board_build.firmware = firmware.bin -board_build.offset = 0x0000 -board_upload.offset_address = 0x08000000 -build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC -debug_tool = jlink -upload_protocol = jlink -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py - buildroot/share/PlatformIO/scripts/stm32_bootloader.py - -# -# This SPI is used by Robin Nano V3 -# -[stm32f4_I2C1] -build_flags = -DPIN_WIRE_SCL=PB6 -DPIN_WIRE_SDA=PB7 - -# -# MKS Robin Nano V3 -# -[env:mks_robin_nano_v3] -platform = ${common_stm32.platform} -extends = common_stm32 -build_flags = ${common_stm32.build_flags} ${stm32f4_I2C1.build_flags} -DHAL_PCD_MODULE_ENABLED -DUSBCON -DUSBD_USE_CDC -board = genericSTM32F407VGT6 -board_build.core = stm32 -board_build.variant = MARLIN_F4x7Vx -board_build.ldscript = ldscript.ld -board_build.firmware = Robin_nano_v3.bin -board_build.offset = 0xC000 -board_upload.offset_address = 0x0800C000 -build_unflags = ${common_stm32.build_unflags} -debug_tool = jlink -upload_protocol = jlink -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py - buildroot/share/PlatformIO/scripts/stm32_bootloader.py - -# -# MKS Robin Nano V3 with USB Flash Drive Support -# Currently, using a STM32duino fork, until USB Host get merged -# -[env:mks_robin_nano_v3_usb_flash_drive] -extends = env:mks_robin_nano_v3 -platform_packages = ${stm32_flash_drive.platform_packages} -build_flags = ${stm32_flash_drive.build_flags} ${stm32f4_I2C1.build_flags} - -DUSBCON - -DUSE_USBHOST_HS - -DUSBD_IRQ_PRIO=5 - -DUSBD_IRQ_SUBPRIO=6 - -DUSE_USB_HS_IN_FS - -DUSBD_USE_CDC - -# -# MKS Robin Nano V3 with USB Flash Drive Support and Shared Media -# Currently, using a STM32duino fork, until USB Host and USB Device MSC get merged -# -[env:mks_robin_nano_v3_usb_flash_drive_msc] -platform = ${common_stm32.platform} -extends = env:mks_robin_nano_v3 -platform_packages = framework-arduinoststm32@https://github.com/rhapsodyv/Arduino_Core_STM32/archive/usb-host-msc-cdc-msc.zip -build_unflags = ${common_stm32.build_unflags} -DUSBD_USE_CDC -build_flags = ${stm32_flash_drive.build_flags} ${stm32f4_I2C1.build_flags} - -DUSBCON - -DUSE_USBHOST_HS - -DUSBD_IRQ_PRIO=5 - -DUSBD_IRQ_SUBPRIO=6 - -DUSE_USB_HS_IN_FS - -DUSBD_USE_CDC_MSC - -# -# Mingda MPX_ARM_MINI -# - -[env:mingda_mpx_arm_mini] -platform = ${common_stm32.platform} -extends = common_stm32 -board = genericSTM32F103ZE -board_build.core = stm32 -board_build.variant = MARLIN_F103Zx -board_build.ldscript = ldscript.ld -board_build.offset = 0x10000 -build_flags = ${common_stm32.build_flags} -DENABLE_HWSERIAL3 -DTIMER_SERIAL=TIM5 -build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py - buildroot/share/PlatformIO/scripts/stm32_bootloader.py - -################################# -# # -# Other Architectures # -# # -################################# - -# -# Espressif ESP32 -# -[env:esp32] -platform = espressif32@2.1.0 -board = esp32dev -build_flags = ${common.build_flags} -DCORE_DEBUG_LEVEL=0 -src_filter = ${common.default_src_filter} + -lib_ignore = NativeEthernet -upload_speed = 500000 -monitor_speed = 250000 -#upload_port = marlinesp.local -#board_build.flash_mode = qio - -[env:FYSETC_E4] -platform = espressif32@1.11.2 -extends = env:esp32 -board_build.partitions = default_16MB.csv - -# -# Teensy 3.1 / 3.2 (ARM Cortex-M4) -# -[env:teensy31] -platform = teensy -board = teensy31 -src_filter = ${common.default_src_filter} + -lib_ignore = NativeEthernet - -# -# Teensy 3.5 / 3.6 (ARM Cortex-M4) -# -[env:teensy35] -platform = teensy -board = teensy35 -src_filter = ${common.default_src_filter} + -lib_ignore = NativeEthernet - -[env:teensy36] -platform = teensy -board = teensy36 -src_filter = ${common.default_src_filter} + -lib_ignore = NativeEthernet - -# -# Teensy 4.0 / 4.1 (ARM Cortex-M7) -# -[env:teensy41] -platform = teensy -board = teensy41 -src_filter = ${common.default_src_filter} + - -# -# Native -# No supported Arduino libraries, base Marlin only -# -[env:linux_native] -platform = native -framework = -build_flags = -D__PLAT_LINUX__ -std=gnu++17 -ggdb -g -lrt -lpthread -D__MARLIN_FIRMWARE__ -Wno-expansion-to-defined -src_build_flags = -Wall -IMarlin/src/HAL/LINUX/include -build_unflags = -Wall -lib_ldf_mode = off -lib_deps = -src_filter = ${common.default_src_filter} + - # # Just print the dependency tree #