CMS/Marlin
3
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Allow pins override of *_TIMER_NUM and HAL_*_TIMER_ISR (#18128)

Browse Source 
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
This commit is contained in:
ellensp 2020-06-02 11:33:30 +12:00 committed by GitHub
parent 2bf63e29c6
commit 33d1e77e2e
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
43 changed files with 461 additions and 338 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

217
Marlin/src/HAL/AVR/HAL.h
View File

@ -68,9 +68,6 @@
// Types // Types
// ------------------------ // ------------------------
typedef uint16_t hal_timer_t;
#define HAL_TIMER_TYPE_MAX 0xFFFF
typedef int8_t pin_t; typedef int8_t pin_t;
#define SHARED_SERVOS HAS_SERVOS #define SHARED_SERVOS HAS_SERVOS
@ -143,220 +140,6 @@ extern "C" {
} }
#pragma GCC diagnostic pop #pragma GCC diagnostic pop
// timers
#define HAL_TIMER_RATE ((F_CPU) / 8) // i.e., 2MHz or 2.5MHz
#define STEP_TIMER_NUM 1
#define TEMP_TIMER_NUM 0
#define PULSE_TIMER_NUM STEP_TIMER_NUM
#define TEMP_TIMER_FREQUENCY ((F_CPU) / 64.0 / 256.0)
#define STEPPER_TIMER_RATE HAL_TIMER_RATE
#define STEPPER_TIMER_PRESCALE 8
#define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000) // Cannot be of type double
#define PULSE_TIMER_RATE STEPPER_TIMER_RATE // frequency of pulse timer
#define PULSE_TIMER_PRESCALE STEPPER_TIMER_PRESCALE
#define PULSE_TIMER_TICKS_PER_US STEPPER_TIMER_TICKS_PER_US
#define ENABLE_STEPPER_DRIVER_INTERRUPT() SBI(TIMSK1, OCIE1A)
#define DISABLE_STEPPER_DRIVER_INTERRUPT() CBI(TIMSK1, OCIE1A)
#define STEPPER_ISR_ENABLED() TEST(TIMSK1, OCIE1A)
#define ENABLE_TEMPERATURE_INTERRUPT() SBI(TIMSK0, OCIE0B)
#define DISABLE_TEMPERATURE_INTERRUPT() CBI(TIMSK0, OCIE0B)
#define TEMPERATURE_ISR_ENABLED() TEST(TIMSK0, OCIE0B)
FORCE_INLINE void HAL_timer_start(const uint8_t timer_num, const uint32_t) {
switch (timer_num) {
case STEP_TIMER_NUM:
// waveform generation = 0100 = CTC
SET_WGM(1, CTC_OCRnA);
// output mode = 00 (disconnected)
SET_COMA(1, NORMAL);
// Set the timer pre-scaler
// Generally we use a divider of 8, resulting in a 2MHz timer
// frequency on a 16MHz MCU. If you are going to change this, be
// sure to regenerate speed_lookuptable.h with
// create_speed_lookuptable.py
SET_CS(1, PRESCALER_8); // CS 2 = 1/8 prescaler
// Init Stepper ISR to 122 Hz for quick starting
// (F_CPU) / (STEPPER_TIMER_PRESCALE) / frequency
OCR1A = 0x4000;
TCNT1 = 0;
break;
case TEMP_TIMER_NUM:
// Use timer0 for temperature measurement
// Interleave temperature interrupt with millies interrupt
OCR0B = 128;
break;
}
}
#define TIMER_OCR_1 OCR1A
#define TIMER_COUNTER_1 TCNT1
#define TIMER_OCR_0 OCR0A
#define TIMER_COUNTER_0 TCNT0
#define _CAT(a,V...) a##V
#define HAL_timer_set_compare(timer, compare) (_CAT(TIMER_OCR_, timer) = compare)
#define HAL_timer_get_compare(timer) _CAT(TIMER_OCR_, timer)
#define HAL_timer_get_count(timer) _CAT(TIMER_COUNTER_, timer)
/**
* On AVR there is no hardware prioritization and preemption of
* interrupts, so this emulates it. The UART has first priority
* (otherwise, characters will be lost due to UART overflow).
* Then: Stepper, Endstops, Temperature, and -finally- all others.
*/
#define HAL_timer_isr_prologue(TIMER_NUM)
#define HAL_timer_isr_epilogue(TIMER_NUM)
/* 18 cycles maximum latency */
#define HAL_STEP_TIMER_ISR() \
extern "C" void TIMER1_COMPA_vect() __attribute__ ((signal, naked, used, externally_visible)); \
extern "C" void TIMER1_COMPA_vect_bottom() asm ("TIMER1_COMPA_vect_bottom") __attribute__ ((used, externally_visible, noinline)); \
void TIMER1_COMPA_vect() { \
__asm__ __volatile__ ( \
A("push r16") /* 2 Save R16 */ \
A("in r16, __SREG__") /* 1 Get SREG */ \
A("push r16") /* 2 Save SREG into stack */ \
A("lds r16, %[timsk0]") /* 2 Load into R0 the Temperature timer Interrupt mask register */ \
A("push r16") /* 2 Save TIMSK0 into the stack */ \
A("andi r16,~%[msk0]") /* 1 Disable the temperature ISR */ \
A("sts %[timsk0], r16") /* 2 And set the new value */ \
A("lds r16, %[timsk1]") /* 2 Load into R0 the stepper timer Interrupt mask register [TIMSK1] */ \
A("andi r16,~%[msk1]") /* 1 Disable the stepper ISR */ \
A("sts %[timsk1], r16") /* 2 And set the new value */ \
A("push r16") /* 2 Save TIMSK1 into stack */ \
A("in r16, 0x3B") /* 1 Get RAMPZ register */ \
A("push r16") /* 2 Save RAMPZ into stack */ \
A("in r16, 0x3C") /* 1 Get EIND register */ \
A("push r0") /* C runtime can modify all the following registers without restoring them */ \
A("push r1") \
A("push r18") \
A("push r19") \
A("push r20") \
A("push r21") \
A("push r22") \
A("push r23") \
A("push r24") \
A("push r25") \
A("push r26") \
A("push r27") \
A("push r30") \
A("push r31") \
A("clr r1") /* C runtime expects this register to be 0 */ \
A("call TIMER1_COMPA_vect_bottom") /* Call the bottom handler - No inlining allowed, otherwise registers used are not saved */ \
A("pop r31") \
A("pop r30") \
A("pop r27") \
A("pop r26") \
A("pop r25") \
A("pop r24") \
A("pop r23") \
A("pop r22") \
A("pop r21") \
A("pop r20") \
A("pop r19") \
A("pop r18") \
A("pop r1") \
A("pop r0") \
A("out 0x3C, r16") /* 1 Restore EIND register */ \
A("pop r16") /* 2 Get the original RAMPZ register value */ \
A("out 0x3B, r16") /* 1 Restore RAMPZ register to its original value */ \
A("pop r16") /* 2 Get the original TIMSK1 value but with stepper ISR disabled */ \
A("ori r16,%[msk1]") /* 1 Reenable the stepper ISR */ \
A("cli") /* 1 Disable global interrupts - Reenabling Stepper ISR can reenter amd temperature can reenter, and we want that, if it happens, after this ISR has ended */ \
A("sts %[timsk1], r16") /* 2 And restore the old value - This reenables the stepper ISR */ \
A("pop r16") /* 2 Get the temperature timer Interrupt mask register [TIMSK0] */ \
A("sts %[timsk0], r16") /* 2 And restore the old value - This reenables the temperature ISR */ \
A("pop r16") /* 2 Get the old SREG value */ \
A("out __SREG__, r16") /* 1 And restore the SREG value */ \
A("pop r16") /* 2 Restore R16 value */ \
A("reti") /* 4 Return from interrupt */ \
: \
: [timsk0] "i" ((uint16_t)&TIMSK0), \
[timsk1] "i" ((uint16_t)&TIMSK1), \
[msk0] "M" ((uint8_t)(1<<OCIE0B)),\
[msk1] "M" ((uint8_t)(1<<OCIE1A)) \
: \
); \
} \
void TIMER1_COMPA_vect_bottom()
/* 14 cycles maximum latency */
#define HAL_TEMP_TIMER_ISR() \
extern "C" void TIMER0_COMPB_vect() __attribute__ ((signal, naked, used, externally_visible)); \
extern "C" void TIMER0_COMPB_vect_bottom() asm ("TIMER0_COMPB_vect_bottom") __attribute__ ((used, externally_visible, noinline)); \
void TIMER0_COMPB_vect() { \
__asm__ __volatile__ ( \
A("push r16") /* 2 Save R16 */ \
A("in r16, __SREG__") /* 1 Get SREG */ \
A("push r16") /* 2 Save SREG into stack */ \
A("lds r16, %[timsk0]") /* 2 Load into R0 the Temperature timer Interrupt mask register */ \
A("andi r16,~%[msk0]") /* 1 Disable the temperature ISR */ \
A("sts %[timsk0], r16") /* 2 And set the new value */ \
A("sei") /* 1 Enable global interrupts - It is safe, as the temperature ISR is disabled, so we cannot reenter it */ \
A("push r16") /* 2 Save TIMSK0 into stack */ \
A("in r16, 0x3B") /* 1 Get RAMPZ register */ \
A("push r16") /* 2 Save RAMPZ into stack */ \
A("in r16, 0x3C") /* 1 Get EIND register */ \
A("push r0") /* C runtime can modify all the following registers without restoring them */ \
A("push r1") \
A("push r18") \
A("push r19") \
A("push r20") \
A("push r21") \
A("push r22") \
A("push r23") \
A("push r24") \
A("push r25") \
A("push r26") \
A("push r27") \
A("push r30") \
A("push r31") \
A("clr r1") /* C runtime expects this register to be 0 */ \
A("call TIMER0_COMPB_vect_bottom") /* Call the bottom handler - No inlining allowed, otherwise registers used are not saved */ \
A("pop r31") \
A("pop r30") \
A("pop r27") \
A("pop r26") \
A("pop r25") \
A("pop r24") \
A("pop r23") \
A("pop r22") \
A("pop r21") \
A("pop r20") \
A("pop r19") \
A("pop r18") \
A("pop r1") \
A("pop r0") \
A("out 0x3C, r16") /* 1 Restore EIND register */ \
A("pop r16") /* 2 Get the original RAMPZ register value */ \
A("out 0x3B, r16") /* 1 Restore RAMPZ register to its original value */ \
A("pop r16") /* 2 Get the original TIMSK0 value but with temperature ISR disabled */ \
A("ori r16,%[msk0]") /* 1 Enable temperature ISR */ \
A("cli") /* 1 Disable global interrupts - We must do this, as we will reenable the temperature ISR, and we don't want to reenter this handler until the current one is done */ \
A("sts %[timsk0], r16") /* 2 And restore the old value */ \
A("pop r16") /* 2 Get the old SREG */ \
A("out __SREG__, r16") /* 1 And restore the SREG value */ \
A("pop r16") /* 2 Restore R16 */ \
A("reti") /* 4 Return from interrupt */ \
: \
: [timsk0] "i"((uint16_t)&TIMSK0), \
[msk0] "M" ((uint8_t)(1<<OCIE0B)) \
: \
); \
} \
void TIMER0_COMPB_vect_bottom()
// ADC // ADC
#ifdef DIDR2 #ifdef DIDR2
#define HAL_ANALOG_SELECT(ind) do{ if (ind < 8) SBI(DIDR0, ind); else SBI(DIDR2, ind & 0x07); }while(0) #define HAL_ANALOG_SELECT(ind) do{ if (ind < 8) SBI(DIDR0, ind); else SBI(DIDR2, ind & 0x07); }while(0)

259
Marlin/src/HAL/AVR/timers.h Normal file
View File

@ -0,0 +1,259 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include <stdint.h>
// ------------------------
// Types
// ------------------------
typedef uint16_t hal_timer_t;
#define HAL_TIMER_TYPE_MAX 0xFFFF
// ------------------------
// Defines
// ------------------------
#define HAL_TIMER_RATE ((F_CPU) / 8) // i.e., 2MHz or 2.5MHz
#ifndef STEP_TIMER_NUM
#define STEP_TIMER_NUM 1
#endif
#ifndef PULSE_TIMER_NUM
#define PULSE_TIMER_NUM STEP_TIMER_NUM
#endif
#ifndef TEMP_TIMER_NUM
#define TEMP_TIMER_NUM 0
#endif
#define TEMP_TIMER_FREQUENCY ((F_CPU) / 64.0 / 256.0)
#define STEPPER_TIMER_RATE HAL_TIMER_RATE
#define STEPPER_TIMER_PRESCALE 8
#define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000) // Cannot be of type double
#define PULSE_TIMER_RATE STEPPER_TIMER_RATE // frequency of pulse timer
#define PULSE_TIMER_PRESCALE STEPPER_TIMER_PRESCALE
#define PULSE_TIMER_TICKS_PER_US STEPPER_TIMER_TICKS_PER_US
#define ENABLE_STEPPER_DRIVER_INTERRUPT() SBI(TIMSK1, OCIE1A)
#define DISABLE_STEPPER_DRIVER_INTERRUPT() CBI(TIMSK1, OCIE1A)
#define STEPPER_ISR_ENABLED() TEST(TIMSK1, OCIE1A)
#define ENABLE_TEMPERATURE_INTERRUPT() SBI(TIMSK0, OCIE0B)
#define DISABLE_TEMPERATURE_INTERRUPT() CBI(TIMSK0, OCIE0B)
#define TEMPERATURE_ISR_ENABLED() TEST(TIMSK0, OCIE0B)
FORCE_INLINE void HAL_timer_start(const uint8_t timer_num, const uint32_t) {
switch (timer_num) {
case STEP_TIMER_NUM:
// waveform generation = 0100 = CTC
SET_WGM(1, CTC_OCRnA);
// output mode = 00 (disconnected)
SET_COMA(1, NORMAL);
// Set the timer pre-scaler
// Generally we use a divider of 8, resulting in a 2MHz timer
// frequency on a 16MHz MCU. If you are going to change this, be
// sure to regenerate speed_lookuptable.h with
// create_speed_lookuptable.py
SET_CS(1, PRESCALER_8); // CS 2 = 1/8 prescaler
// Init Stepper ISR to 122 Hz for quick starting
// (F_CPU) / (STEPPER_TIMER_PRESCALE) / frequency
OCR1A = 0x4000;
TCNT1 = 0;
break;
case TEMP_TIMER_NUM:
// Use timer0 for temperature measurement
// Interleave temperature interrupt with millies interrupt
OCR0B = 128;
break;
}
}
#define TIMER_OCR_1 OCR1A
#define TIMER_COUNTER_1 TCNT1
#define TIMER_OCR_0 OCR0A
#define TIMER_COUNTER_0 TCNT0
#define _CAT(a,V...) a##V
#define HAL_timer_set_compare(timer, compare) (_CAT(TIMER_OCR_, timer) = compare)
#define HAL_timer_get_compare(timer) _CAT(TIMER_OCR_, timer)
#define HAL_timer_get_count(timer) _CAT(TIMER_COUNTER_, timer)
/**
* On AVR there is no hardware prioritization and preemption of
* interrupts, so this emulates it. The UART has first priority
* (otherwise, characters will be lost due to UART overflow).
* Then: Stepper, Endstops, Temperature, and -finally- all others.
*/
#define HAL_timer_isr_prologue(TIMER_NUM)
#define HAL_timer_isr_epilogue(TIMER_NUM)
/* 18 cycles maximum latency */
#ifndef HAL_STEP_TIMER_ISR
#define HAL_STEP_TIMER_ISR() \
extern "C" void TIMER1_COMPA_vect() __attribute__ ((signal, naked, used, externally_visible)); \
extern "C" void TIMER1_COMPA_vect_bottom() asm ("TIMER1_COMPA_vect_bottom") __attribute__ ((used, externally_visible, noinline)); \
void TIMER1_COMPA_vect() { \
__asm__ __volatile__ ( \
A("push r16") /* 2 Save R16 */ \
A("in r16, __SREG__") /* 1 Get SREG */ \
A("push r16") /* 2 Save SREG into stack */ \
A("lds r16, %[timsk0]") /* 2 Load into R0 the Temperature timer Interrupt mask register */ \
A("push r16") /* 2 Save TIMSK0 into the stack */ \
A("andi r16,~%[msk0]") /* 1 Disable the temperature ISR */ \
A("sts %[timsk0], r16") /* 2 And set the new value */ \
A("lds r16, %[timsk1]") /* 2 Load into R0 the stepper timer Interrupt mask register [TIMSK1] */ \
A("andi r16,~%[msk1]") /* 1 Disable the stepper ISR */ \
A("sts %[timsk1], r16") /* 2 And set the new value */ \
A("push r16") /* 2 Save TIMSK1 into stack */ \
A("in r16, 0x3B") /* 1 Get RAMPZ register */ \
A("push r16") /* 2 Save RAMPZ into stack */ \
A("in r16, 0x3C") /* 1 Get EIND register */ \
A("push r0") /* C runtime can modify all the following registers without restoring them */ \
A("push r1") \
A("push r18") \
A("push r19") \
A("push r20") \
A("push r21") \
A("push r22") \
A("push r23") \
A("push r24") \
A("push r25") \
A("push r26") \
A("push r27") \
A("push r30") \
A("push r31") \
A("clr r1") /* C runtime expects this register to be 0 */ \
A("call TIMER1_COMPA_vect_bottom") /* Call the bottom handler - No inlining allowed, otherwise registers used are not saved */ \
A("pop r31") \
A("pop r30") \
A("pop r27") \
A("pop r26") \
A("pop r25") \
A("pop r24") \
A("pop r23") \
A("pop r22") \
A("pop r21") \
A("pop r20") \
A("pop r19") \
A("pop r18") \
A("pop r1") \
A("pop r0") \
A("out 0x3C, r16") /* 1 Restore EIND register */ \
A("pop r16") /* 2 Get the original RAMPZ register value */ \
A("out 0x3B, r16") /* 1 Restore RAMPZ register to its original value */ \
A("pop r16") /* 2 Get the original TIMSK1 value but with stepper ISR disabled */ \
A("ori r16,%[msk1]") /* 1 Reenable the stepper ISR */ \
A("cli") /* 1 Disable global interrupts - Reenabling Stepper ISR can reenter amd temperature can reenter, and we want that, if it happens, after this ISR has ended */ \
A("sts %[timsk1], r16") /* 2 And restore the old value - This reenables the stepper ISR */ \
A("pop r16") /* 2 Get the temperature timer Interrupt mask register [TIMSK0] */ \
A("sts %[timsk0], r16") /* 2 And restore the old value - This reenables the temperature ISR */ \
A("pop r16") /* 2 Get the old SREG value */ \
A("out __SREG__, r16") /* 1 And restore the SREG value */ \
A("pop r16") /* 2 Restore R16 value */ \
A("reti") /* 4 Return from interrupt */ \
: \
: [timsk0] "i" ((uint16_t)&TIMSK0), \
[timsk1] "i" ((uint16_t)&TIMSK1), \
[msk0] "M" ((uint8_t)(1<<OCIE0B)),\
[msk1] "M" ((uint8_t)(1<<OCIE1A)) \
: \
); \
} \
void TIMER1_COMPA_vect_bottom()
#endif // HAL_STEP_TIMER_ISR
#ifndef HAL_TEMP_TIMER_ISR
/* 14 cycles maximum latency */
#define HAL_TEMP_TIMER_ISR() \
extern "C" void TIMER0_COMPB_vect() __attribute__ ((signal, naked, used, externally_visible)); \
extern "C" void TIMER0_COMPB_vect_bottom() asm ("TIMER0_COMPB_vect_bottom") __attribute__ ((used, externally_visible, noinline)); \
void TIMER0_COMPB_vect() { \
__asm__ __volatile__ ( \
A("push r16") /* 2 Save R16 */ \
A("in r16, __SREG__") /* 1 Get SREG */ \
A("push r16") /* 2 Save SREG into stack */ \
A("lds r16, %[timsk0]") /* 2 Load into R0 the Temperature timer Interrupt mask register */ \
A("andi r16,~%[msk0]") /* 1 Disable the temperature ISR */ \
A("sts %[timsk0], r16") /* 2 And set the new value */ \
A("sei") /* 1 Enable global interrupts - It is safe, as the temperature ISR is disabled, so we cannot reenter it */ \
A("push r16") /* 2 Save TIMSK0 into stack */ \
A("in r16, 0x3B") /* 1 Get RAMPZ register */ \
A("push r16") /* 2 Save RAMPZ into stack */ \
A("in r16, 0x3C") /* 1 Get EIND register */ \
A("push r0") /* C runtime can modify all the following registers without restoring them */ \
A("push r1") \
A("push r18") \
A("push r19") \
A("push r20") \
A("push r21") \
A("push r22") \
A("push r23") \
A("push r24") \
A("push r25") \
A("push r26") \
A("push r27") \
A("push r30") \
A("push r31") \
A("clr r1") /* C runtime expects this register to be 0 */ \
A("call TIMER0_COMPB_vect_bottom") /* Call the bottom handler - No inlining allowed, otherwise registers used are not saved */ \
A("pop r31") \
A("pop r30") \
A("pop r27") \
A("pop r26") \
A("pop r25") \
A("pop r24") \
A("pop r23") \
A("pop r22") \
A("pop r21") \
A("pop r20") \
A("pop r19") \
A("pop r18") \
A("pop r1") \
A("pop r0") \
A("out 0x3C, r16") /* 1 Restore EIND register */ \
A("pop r16") /* 2 Get the original RAMPZ register value */ \
A("out 0x3B, r16") /* 1 Restore RAMPZ register to its original value */ \
A("pop r16") /* 2 Get the original TIMSK0 value but with temperature ISR disabled */ \
A("ori r16,%[msk0]") /* 1 Enable temperature ISR */ \
A("cli") /* 1 Disable global interrupts - We must do this, as we will reenable the temperature ISR, and we don't want to reenter this handler until the current one is done */ \
A("sts %[timsk0], r16") /* 2 And restore the old value */ \
A("pop r16") /* 2 Get the old SREG */ \
A("out __SREG__, r16") /* 1 And restore the SREG value */ \
A("pop r16") /* 2 Restore R16 */ \
A("reti") /* 4 Return from interrupt */ \
: \
: [timsk0] "i"((uint16_t)&TIMSK0), \
[msk0] "M" ((uint8_t)(1<<OCIE0B)) \
: \
); \
} \
void TIMER0_COMPB_vect_bottom()
#endif // HAL_TEMP_TIMER_ISR

1
Marlin/src/HAL/DUE/HAL.h
View File

@ -35,7 +35,6 @@
#include "../shared/HAL_SPI.h" #include "../shared/HAL_SPI.h"
#include "fastio.h" #include "fastio.h"
#include "watchdog.h" #include "watchdog.h"
#include "timers.h"
#include <stdint.h> #include <stdint.h>

1
Marlin/src/HAL/DUE/Tone.cpp
View File

@ -31,7 +31,6 @@
#include "../../inc/MarlinConfig.h" #include "../../inc/MarlinConfig.h"
#include "HAL.h" #include "HAL.h"
#include "timers.h"
static pin_t tone_pin; static pin_t tone_pin;
volatile static int32_t toggles; volatile static int32_t toggles;

2
Marlin/src/HAL/DUE/timers.cpp
View File

@ -34,8 +34,6 @@
#include "../../inc/MarlinConfig.h" #include "../../inc/MarlinConfig.h"
#include "HAL.h" #include "HAL.h"
#include "timers.h"
// ------------------------ // ------------------------
// Local defines // Local defines
// ------------------------ // ------------------------

14
Marlin/src/HAL/DUE/timers.h
View File

@ -40,11 +40,17 @@ typedef uint32_t hal_timer_t;
#define HAL_TIMER_RATE ((F_CPU) / 2) // frequency of timers peripherals #define HAL_TIMER_RATE ((F_CPU) / 2) // frequency of timers peripherals
#ifndef STEP_TIMER_NUM #ifndef STEP_TIMER_NUM
#define STEP_TIMER_NUM 2 // index of timer to use for stepper #define STEP_TIMER_NUM 2 // Timer Index for Stepper
#endif #endif
#define TEMP_TIMER_NUM 4 // index of timer to use for temperature #ifndef PULSE_TIMER_NUM
#define PULSE_TIMER_NUM STEP_TIMER_NUM #define PULSE_TIMER_NUM STEP_TIMER_NUM
#endif
#ifndef TEMP_TIMER_NUM
#define TEMP_TIMER_NUM 4 // Timer Index for Temperature
#endif
#ifndef TONE_TIMER_NUM
#define TONE_TIMER_NUM 6 // index of timer to use for beeper tones #define TONE_TIMER_NUM 6 // index of timer to use for beeper tones
#endif
#define TEMP_TIMER_FREQUENCY 1000 // temperature interrupt frequency #define TEMP_TIMER_FREQUENCY 1000 // temperature interrupt frequency
@ -66,8 +72,12 @@ typedef uint32_t hal_timer_t;
#ifndef HAL_STEP_TIMER_ISR #ifndef HAL_STEP_TIMER_ISR
#define HAL_STEP_TIMER_ISR() void TC2_Handler() #define HAL_STEP_TIMER_ISR() void TC2_Handler()
#endif #endif
#ifndef HAL_TEMP_TIMER_ISR
#define HAL_TEMP_TIMER_ISR() void TC4_Handler() #define HAL_TEMP_TIMER_ISR() void TC4_Handler()
#endif
#ifndef HAL_TONE_TIMER_ISR
#define HAL_TONE_TIMER_ISR() void TC6_Handler() #define HAL_TONE_TIMER_ISR() void TC6_Handler()
#endif
// ------------------------ // ------------------------
// Types // Types

6
Marlin/src/HAL/ESP32/HAL.cpp
View File

@ -21,15 +21,13 @@
*/ */
#ifdef ARDUINO_ARCH_ESP32 #ifdef ARDUINO_ARCH_ESP32
#include "HAL.h" #include "../../inc/MarlinConfig.h"
#include "timers.h"
#include <rom/rtc.h> #include <rom/rtc.h>
#include <driver/adc.h> #include <driver/adc.h>
#include <esp_adc_cal.h> #include <esp_adc_cal.h>
#include <HardwareSerial.h> #include <HardwareSerial.h>
#include "../../inc/MarlinConfigPre.h"
#if ENABLED(WIFISUPPORT) #if ENABLED(WIFISUPPORT)
#include <ESPAsyncWebServer.h> #include <ESPAsyncWebServer.h>
#include "wifi.h" #include "wifi.h"

2
Marlin/src/HAL/ESP32/HAL.h
View File

@ -34,8 +34,6 @@
#include "watchdog.h" #include "watchdog.h"
#include "i2s.h" #include "i2s.h"
#include "timers.h"
#if ENABLED(WIFISUPPORT) #if ENABLED(WIFISUPPORT)
#include "WebSocketSerial.h" #include "WebSocketSerial.h"
#endif #endif

11
Marlin/src/HAL/ESP32/HAL_SPI.cpp
View File

@ -22,13 +22,12 @@
*/ */
#ifdef ARDUINO_ARCH_ESP32 #ifdef ARDUINO_ARCH_ESP32
#include "HAL.h" #include "../../inc/MarlinConfig.h"
#include "../shared/HAL_SPI.h"
#include <pins_arduino.h>
#include "spi_pins.h"
#include <SPI.h>
#include "../../core/macros.h" #include "../shared/HAL_SPI.h"
#include <pins_arduino.h>
#include <SPI.h>
// ------------------------ // ------------------------
// Public Variables // Public Variables

4
Marlin/src/HAL/ESP32/timers.cpp
View File

@ -27,9 +27,7 @@
#include <driver/periph_ctrl.h> #include <driver/periph_ctrl.h>
#include <driver/timer.h> #include <driver/timer.h>
#include "HAL.h" #include "../../inc/MarlinConfig.h"
#include "timers.h"
// ------------------------ // ------------------------
// Local defines // Local defines

20
Marlin/src/HAL/ESP32/timers.h
View File

@ -38,10 +38,18 @@
typedef uint64_t hal_timer_t; typedef uint64_t hal_timer_t;
#define HAL_TIMER_TYPE_MAX 0xFFFFFFFFFFFFFFFFULL #define HAL_TIMER_TYPE_MAX 0xFFFFFFFFFFFFFFFFULL
#define STEP_TIMER_NUM 0 // index of timer to use for stepper #ifndef STEP_TIMER_NUM
#define TEMP_TIMER_NUM 1 // index of timer to use for temperature #define STEP_TIMER_NUM 0 // Timer Index for Stepper
#define PWM_TIMER_NUM 2 // index of timer to use for PWM outputs #endif
#ifndef PULSE_TIMER_NUM
#define PULSE_TIMER_NUM STEP_TIMER_NUM #define PULSE_TIMER_NUM STEP_TIMER_NUM
#endif
#ifndef TEMP_TIMER_NUM
#define TEMP_TIMER_NUM 1 // Timer Index for Temperature
#endif
#ifndef PWM_TIMER_NUM
#define PWM_TIMER_NUM 2 // index of timer to use for PWM outputs
#endif
#define HAL_TIMER_RATE APB_CLK_FREQ // frequency of timer peripherals #define HAL_TIMER_RATE APB_CLK_FREQ // frequency of timer peripherals
@ -79,9 +87,15 @@ typedef uint64_t hal_timer_t;
#define ENABLE_TEMPERATURE_INTERRUPT() HAL_timer_enable_interrupt(TEMP_TIMER_NUM) #define ENABLE_TEMPERATURE_INTERRUPT() HAL_timer_enable_interrupt(TEMP_TIMER_NUM)
#define DISABLE_TEMPERATURE_INTERRUPT() HAL_timer_disable_interrupt(TEMP_TIMER_NUM) #define DISABLE_TEMPERATURE_INTERRUPT() HAL_timer_disable_interrupt(TEMP_TIMER_NUM)
#ifndef HAL_TEMP_TIMER_ISR
#define HAL_TEMP_TIMER_ISR() extern "C" void tempTC_Handler() #define HAL_TEMP_TIMER_ISR() extern "C" void tempTC_Handler()
#endif
#ifndef HAL_STEP_TIMER_ISR
#define HAL_STEP_TIMER_ISR() extern "C" void stepTC_Handler() #define HAL_STEP_TIMER_ISR() extern "C" void stepTC_Handler()
#endif
#ifndef HAL_PWM_TIMER_ISR
#define HAL_PWM_TIMER_ISR() extern "C" void pwmTC_Handler() #define HAL_PWM_TIMER_ISR() extern "C" void pwmTC_Handler()
#endif
extern "C" void tempTC_Handler(); extern "C" void tempTC_Handler();
extern "C" void stepTC_Handler(); extern "C" void stepTC_Handler();

1
Marlin/src/HAL/LINUX/HAL.h
View File

@ -56,7 +56,6 @@ uint8_t _getc();
#include "../shared/HAL_SPI.h" #include "../shared/HAL_SPI.h"
#include "fastio.h" #include "fastio.h"
#include "watchdog.h" #include "watchdog.h"
#include "timers.h"
#include "serial.h" #include "serial.h"
#define SHARED_SERVOS HAS_SERVOS #define SHARED_SERVOS HAS_SERVOS

1
Marlin/src/HAL/LINUX/timers.cpp
View File

@ -24,7 +24,6 @@
#include "hardware/Timer.h" #include "hardware/Timer.h"
#include "../../inc/MarlinConfig.h" #include "../../inc/MarlinConfig.h"
#include "timers.h"
/** /**
* Use POSIX signals to attempt to emulate Interrupts * Use POSIX signals to attempt to emulate Interrupts

12
Marlin/src/HAL/LINUX/timers.h
View File

@ -37,9 +37,15 @@ typedef uint32_t hal_timer_t;
#define HAL_TIMER_RATE ((SystemCoreClock) / 4) // frequency of timers peripherals #define HAL_TIMER_RATE ((SystemCoreClock) / 4) // frequency of timers peripherals
#ifndef STEP_TIMER_NUM
#define STEP_TIMER_NUM 0 // Timer Index for Stepper #define STEP_TIMER_NUM 0 // Timer Index for Stepper
#define TEMP_TIMER_NUM 1 // Timer Index for Temperature #endif
#ifndef PULSE_TIMER_NUM
#define PULSE_TIMER_NUM STEP_TIMER_NUM #define PULSE_TIMER_NUM STEP_TIMER_NUM
#endif
#ifndef TEMP_TIMER_NUM
#define TEMP_TIMER_NUM 1 // Timer Index for Temperature
#endif
#define TEMP_TIMER_RATE 1000000 #define TEMP_TIMER_RATE 1000000
#define TEMP_TIMER_FREQUENCY 1000 // temperature interrupt frequency #define TEMP_TIMER_FREQUENCY 1000 // temperature interrupt frequency
@ -59,8 +65,12 @@ typedef uint32_t hal_timer_t;
#define ENABLE_TEMPERATURE_INTERRUPT() HAL_timer_enable_interrupt(TEMP_TIMER_NUM) #define ENABLE_TEMPERATURE_INTERRUPT() HAL_timer_enable_interrupt(TEMP_TIMER_NUM)
#define DISABLE_TEMPERATURE_INTERRUPT() HAL_timer_disable_interrupt(TEMP_TIMER_NUM) #define DISABLE_TEMPERATURE_INTERRUPT() HAL_timer_disable_interrupt(TEMP_TIMER_NUM)
#ifndef HAL_STEP_TIMER_ISR
#define HAL_STEP_TIMER_ISR() extern "C" void TIMER0_IRQHandler() #define HAL_STEP_TIMER_ISR() extern "C" void TIMER0_IRQHandler()
#endif
#ifndef HAL_TEMP_TIMER_ISR
#define HAL_TEMP_TIMER_ISR() extern "C" void TIMER1_IRQHandler() #define HAL_TEMP_TIMER_ISR() extern "C" void TIMER1_IRQHandler()
#endif
// PWM timer // PWM timer
#define HAL_PWM_TIMER #define HAL_PWM_TIMER

1
Marlin/src/HAL/LPC1768/HAL.h
View File

@ -41,7 +41,6 @@ extern "C" volatile uint32_t _millis;
#include "../shared/HAL_SPI.h" #include "../shared/HAL_SPI.h"
#include "fastio.h" #include "fastio.h"
#include "watchdog.h" #include "watchdog.h"
#include "timers.h"
#include "MarlinSerial.h" #include "MarlinSerial.h"
#include <adc.h> #include <adc.h>

2
Marlin/src/HAL/LPC1768/main.cpp
View File

@ -38,8 +38,6 @@ extern "C" {
#include "../../sd/cardreader.h" #include "../../sd/cardreader.h"
#include "../../inc/MarlinConfig.h" #include "../../inc/MarlinConfig.h"
#include "../../core/millis_t.h" #include "../../core/millis_t.h"
#include "HAL.h"
#include "timers.h"
extern uint32_t MSC_SD_Init(uint8_t pdrv); extern uint32_t MSC_SD_Init(uint8_t pdrv);
extern "C" int isLPC1769(); extern "C" int isLPC1769();

1
Marlin/src/HAL/LPC1768/timers.cpp
View File

@ -29,7 +29,6 @@
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
#include "../../inc/MarlinConfig.h" #include "../../inc/MarlinConfig.h"
#include "timers.h"
void HAL_timer_init() { void HAL_timer_init() {
SBI(LPC_SC->PCONP, SBIT_TIMER0); // Power ON Timer 0 SBI(LPC_SC->PCONP, SBIT_TIMER0); // Power ON Timer 0

14
Marlin/src/HAL/LPC1768/timers.h
View File

@ -61,10 +61,18 @@ typedef uint32_t hal_timer_t;
#define HAL_TIMER_RATE ((F_CPU) / 4) // frequency of timers peripherals #define HAL_TIMER_RATE ((F_CPU) / 4) // frequency of timers peripherals
#ifndef STEP_TIMER_NUM
#define STEP_TIMER_NUM 0 // Timer Index for Stepper #define STEP_TIMER_NUM 0 // Timer Index for Stepper
#define TEMP_TIMER_NUM 1 // Timer Index for Temperature #endif
#ifndef PULSE_TIMER_NUM
#define PULSE_TIMER_NUM STEP_TIMER_NUM #define PULSE_TIMER_NUM STEP_TIMER_NUM
#endif
#ifndef TEMP_TIMER_NUM
#define TEMP_TIMER_NUM 1 // Timer Index for Temperature
#endif
#ifndef PWM_TIMER_NUM
#define PWM_TIMER_NUM 3 // Timer Index for PWM #define PWM_TIMER_NUM 3 // Timer Index for PWM
#endif
#define TEMP_TIMER_RATE 1000000 #define TEMP_TIMER_RATE 1000000
#define TEMP_TIMER_FREQUENCY 1000 // temperature interrupt frequency #define TEMP_TIMER_FREQUENCY 1000 // temperature interrupt frequency
@ -84,8 +92,12 @@ typedef uint32_t hal_timer_t;
#define ENABLE_TEMPERATURE_INTERRUPT() HAL_timer_enable_interrupt(TEMP_TIMER_NUM) #define ENABLE_TEMPERATURE_INTERRUPT() HAL_timer_enable_interrupt(TEMP_TIMER_NUM)
#define DISABLE_TEMPERATURE_INTERRUPT() HAL_timer_disable_interrupt(TEMP_TIMER_NUM) #define DISABLE_TEMPERATURE_INTERRUPT() HAL_timer_disable_interrupt(TEMP_TIMER_NUM)
#ifndef HAL_STEP_TIMER_ISR
#define HAL_STEP_TIMER_ISR() _HAL_TIMER_ISR(STEP_TIMER_NUM) #define HAL_STEP_TIMER_ISR() _HAL_TIMER_ISR(STEP_TIMER_NUM)
#endif
#ifndef HAL_TEMP_TIMER_ISR
#define HAL_TEMP_TIMER_ISR() _HAL_TIMER_ISR(TEMP_TIMER_NUM) #define HAL_TEMP_TIMER_ISR() _HAL_TIMER_ISR(TEMP_TIMER_NUM)
#endif
// Timer references by index // Timer references by index
#define STEP_TIMER_PTR _HAL_TIMER(STEP_TIMER_NUM) #define STEP_TIMER_PTR _HAL_TIMER(STEP_TIMER_NUM)

1
Marlin/src/HAL/SAMD51/HAL.h
View File

@ -27,7 +27,6 @@
#include "../shared/HAL_SPI.h" #include "../shared/HAL_SPI.h"
#include "fastio.h" #include "fastio.h"
#include "watchdog.h" #include "watchdog.h"
#include "timers.h"
#ifdef ADAFRUIT_GRAND_CENTRAL_M4 #ifdef ADAFRUIT_GRAND_CENTRAL_M4
#include "MarlinSerial_AGCM4.h" #include "MarlinSerial_AGCM4.h"

1
Marlin/src/HAL/SAMD51/Servo.cpp
View File

@ -32,7 +32,6 @@
#include "../shared/servo.h" #include "../shared/servo.h"
#include "../shared/servo_private.h" #include "../shared/servo_private.h"
#include "SAMD51.h" #include "SAMD51.h"
#include "timers.h"
#define __TC_GCLK_ID(t) TC##t##_GCLK_ID #define __TC_GCLK_ID(t) TC##t##_GCLK_ID
#define _TC_GCLK_ID(t) __TC_GCLK_ID(t) #define _TC_GCLK_ID(t) __TC_GCLK_ID(t)

1
Marlin/src/HAL/SAMD51/timers.cpp
View File

@ -24,7 +24,6 @@
// Includes // Includes
// -------------------------------------------------------------------------- // --------------------------------------------------------------------------
#include "../../inc/MarlinConfig.h" #include "../../inc/MarlinConfig.h"
#include "timers.h"
// -------------------------------------------------------------------------- // --------------------------------------------------------------------------
// Local defines // Local defines

12
Marlin/src/HAL/SAMD51/timers.h
View File

@ -32,9 +32,15 @@ typedef uint32_t hal_timer_t;
#define HAL_TIMER_RATE F_CPU // frequency of timers peripherals #define HAL_TIMER_RATE F_CPU // frequency of timers peripherals
#define STEP_TIMER_NUM 0 // index of timer to use for stepper (also +1 for 32bits counter) #ifndef STEP_TIMER_NUM
#define STEP_TIMER_NUM 0 // Timer Index for Stepper
#endif
#ifndef PULSE_TIMER_NUM
#define PULSE_TIMER_NUM STEP_TIMER_NUM #define PULSE_TIMER_NUM STEP_TIMER_NUM
#define TEMP_TIMER_NUM RTC_TIMER_NUM // index of timer to use for temperature #endif
#ifndef TEMP_TIMER_NUM
#define TEMP_TIMER_NUM RTC_TIMER_NUM // Timer Index for Temperature
#endif
#define TEMP_TIMER_FREQUENCY 1000 // temperature interrupt frequency #define TEMP_TIMER_FREQUENCY 1000 // temperature interrupt frequency
@ -59,7 +65,9 @@ typedef uint32_t hal_timer_t;
#define _TC_HANDLER(t) void TC##t##_Handler() #define _TC_HANDLER(t) void TC##t##_Handler()
#define TC_HANDLER(t) _TC_HANDLER(t) #define TC_HANDLER(t) _TC_HANDLER(t)
#ifndef HAL_STEP_TIMER_ISR
#define HAL_STEP_TIMER_ISR() TC_HANDLER(STEP_TIMER_NUM) #define HAL_STEP_TIMER_ISR() TC_HANDLER(STEP_TIMER_NUM)
#endif
#if STEP_TIMER_NUM != PULSE_TIMER_NUM #if STEP_TIMER_NUM != PULSE_TIMER_NUM
#define HAL_PULSE_TIMER_ISR() TC_HANDLER(PULSE_TIMER_NUM) #define HAL_PULSE_TIMER_ISR() TC_HANDLER(PULSE_TIMER_NUM)
#endif #endif

1
Marlin/src/HAL/STM32/HAL.h
View File

@ -119,7 +119,6 @@
#define DGUS_SERIAL_GET_TX_BUFFER_FREE DGUS_SERIAL.availableForWrite #define DGUS_SERIAL_GET_TX_BUFFER_FREE DGUS_SERIAL.availableForWrite
#endif #endif
#include "timers.h"
/** /**
* TODO: review this to return 1 for pins that are not analog input * TODO: review this to return 1 for pins that are not analog input

3
Marlin/src/HAL/STM32/SoftwareSerial.cpp
View File

@ -36,8 +36,9 @@
// //
#if defined(PLATFORMIO) && defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) #if defined(PLATFORMIO) && defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#include "../../inc/MarlinConfig.h"
#include "SoftwareSerial.h" #include "SoftwareSerial.h"
#include "timers.h"
#define OVERSAMPLE 3 // in RX, Timer will generate interruption OVERSAMPLE time during a bit. Thus OVERSAMPLE ticks in a bit. (interrupt not synchonized with edge). #define OVERSAMPLE 3 // in RX, Timer will generate interruption OVERSAMPLE time during a bit. Thus OVERSAMPLE ticks in a bit. (interrupt not synchonized with edge).

2
Marlin/src/HAL/STM32/timers.cpp
View File

@ -21,8 +21,6 @@
*/ */
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) #if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#include "timers.h"
#include "../../inc/MarlinConfig.h" #include "../../inc/MarlinConfig.h"
// ------------------------ // ------------------------

15
Marlin/src/HAL/STM32/timers.h
View File

@ -33,9 +33,15 @@
#define hal_timer_t uint32_t #define hal_timer_t uint32_t
#define HAL_TIMER_TYPE_MAX 0xFFFFFFFF // Timers can be 16 or 32 bit #define HAL_TIMER_TYPE_MAX 0xFFFFFFFF // Timers can be 16 or 32 bit
#define STEP_TIMER_NUM 0 // index of timer to use for stepper #ifndef STEP_TIMER_NUM
#define TEMP_TIMER_NUM 1 // index of timer to use for temperature #define STEP_TIMER_NUM 0 // Timer Index for Stepper
#endif
#ifndef PULSE_TIMER_NUM
#define PULSE_TIMER_NUM STEP_TIMER_NUM #define PULSE_TIMER_NUM STEP_TIMER_NUM
#endif
#ifndef TEMP_TIMER_NUM
#define TEMP_TIMER_NUM 1 // Timer Index for Temperature
#endif
#define TEMP_TIMER_FREQUENCY 1000 // Temperature::isr() is expected to be called at around 1kHz #define TEMP_TIMER_FREQUENCY 1000 // Temperature::isr() is expected to be called at around 1kHz
@ -57,8 +63,13 @@
extern void Step_Handler(HardwareTimer *htim); extern void Step_Handler(HardwareTimer *htim);
extern void Temp_Handler(HardwareTimer *htim); extern void Temp_Handler(HardwareTimer *htim);
#ifndef HAL_STEP_TIMER_ISR
#define HAL_STEP_TIMER_ISR() void Step_Handler(HardwareTimer *htim) #define HAL_STEP_TIMER_ISR() void Step_Handler(HardwareTimer *htim)
#endif
#ifndef HAL_TEMP_TIMER_ISR
#define HAL_TEMP_TIMER_ISR() void Temp_Handler(HardwareTimer *htim) #define HAL_TEMP_TIMER_ISR() void Temp_Handler(HardwareTimer *htim)
#endif
// ------------------------ // ------------------------
// Public Variables // Public Variables

1
Marlin/src/HAL/STM32F1/HAL.h
View File

@ -36,7 +36,6 @@
#include "fastio.h" #include "fastio.h"
#include "watchdog.h" #include "watchdog.h"
#include "timers.h"
#include <stdint.h> #include <stdint.h>
#include <util/atomic.h> #include <util/atomic.h>

1
Marlin/src/HAL/STM32F1/Servo.cpp
View File

@ -29,7 +29,6 @@
uint8_t ServoCount = 0; uint8_t ServoCount = 0;
#include "Servo.h" #include "Servo.h"
#include "timers.h"
//#include "Servo.h" //#include "Servo.h"

2
Marlin/src/HAL/STM32F1/timers.cpp
View File

@ -27,8 +27,6 @@
#ifdef __STM32F1__ #ifdef __STM32F1__
#include "../../inc/MarlinConfig.h" #include "../../inc/MarlinConfig.h"
#include "HAL.h"
#include "timers.h"
// ------------------------ // ------------------------
// Local defines // Local defines

14
Marlin/src/HAL/STM32F1/timers.h
View File

@ -61,14 +61,20 @@ typedef uint16_t hal_timer_t;
* - Otherwise it uses Timer 8 on boards with STM32_HIGH_DENSITY * - Otherwise it uses Timer 8 on boards with STM32_HIGH_DENSITY
* or Timer 4 on other boards. * or Timer 4 on other boards.
*/ */
#ifndef STEP_TIMER_NUM
#if defined(MCU_STM32F103CB) || defined(MCU_STM32F103C8) #if defined(MCU_STM32F103CB) || defined(MCU_STM32F103C8)
#define STEP_TIMER_NUM 4 // For C8/CB boards, use timer 4 #define STEP_TIMER_NUM 4 // For C8/CB boards, use timer 4
#else #else
#define STEP_TIMER_NUM 5 // for other boards, five is fine. #define STEP_TIMER_NUM 5 // for other boards, five is fine.
#endif #endif
#define TEMP_TIMER_NUM 2 // index of timer to use for temperature #endif
//#define TEMP_TIMER_NUM 4 // 2->4, Timer 2 for Stepper Current PWM #ifndef PULSE_TIMER_NUM
#define PULSE_TIMER_NUM STEP_TIMER_NUM #define PULSE_TIMER_NUM STEP_TIMER_NUM
#endif
#ifndef TEMP_TIMER_NUM
#define TEMP_TIMER_NUM 2 // Timer Index for Temperature
//#define TEMP_TIMER_NUM 4 // 2->4, Timer 2 for Stepper Current PWM
#endif
#if MB(BTT_SKR_MINI_E3_V1_0, BTT_SKR_E3_DIP, BTT_SKR_MINI_E3_V1_2, MKS_ROBIN_LITE) #if MB(BTT_SKR_MINI_E3_V1_0, BTT_SKR_E3_DIP, BTT_SKR_MINI_E3_V1_2, MKS_ROBIN_LITE)
// SKR Mini E3 boards use PA8 as FAN_PIN, so TIMER 1 is used for Fan PWM. // SKR Mini E3 boards use PA8 as FAN_PIN, so TIMER 1 is used for Fan PWM.
@ -111,8 +117,12 @@ timer_dev* get_timer_dev(int number);
// TODO change this // TODO change this
#ifndef HAL_TEMP_TIMER_ISR
#define HAL_TEMP_TIMER_ISR() extern "C" void tempTC_Handler() #define HAL_TEMP_TIMER_ISR() extern "C" void tempTC_Handler()
#endif
#ifndef HAL_STEP_TIMER_ISR
#define HAL_STEP_TIMER_ISR() extern "C" void stepTC_Handler() #define HAL_STEP_TIMER_ISR() extern "C" void stepTC_Handler()
#endif
extern "C" void tempTC_Handler(); extern "C" void tempTC_Handler();
extern "C" void stepTC_Handler(); extern "C" void stepTC_Handler();

1
Marlin/src/HAL/STM32_F4_F7/HAL.h
View File

@ -31,7 +31,6 @@
#include "../shared/HAL_SPI.h" #include "../shared/HAL_SPI.h"
#include "fastio.h" #include "fastio.h"
#include "timers.h"
#include "watchdog.h" #include "watchdog.h"
#include <stdint.h> #include <stdint.h>

3
Marlin/src/HAL/STM32_F4_F7/STM32F4/timers.cpp
View File

@ -21,8 +21,7 @@
*/ */
#if defined(STM32GENERIC) && defined(STM32F4) #if defined(STM32GENERIC) && defined(STM32F4)
#include "../HAL.h" #include "../../../inc/MarlinConfig.h"
#include "timers.h"
// ------------------------ // ------------------------
// Local defines // Local defines

28
Marlin/src/HAL/STM32_F4_F7/STM32F4/timers.h
View File

@ -34,9 +34,15 @@
#define HAL_TIMER_RATE (HAL_RCC_GetSysClockFreq() / 2) // frequency of timer peripherals #define HAL_TIMER_RATE (HAL_RCC_GetSysClockFreq() / 2) // frequency of timer peripherals
#define STEP_TIMER_NUM 0 // index of timer to use for stepper #ifndef STEP_TIMER_NUM
#define TEMP_TIMER_NUM 1 // index of timer to use for temperature #define STEP_TIMER_NUM 0 // Timer Index for Stepper
#endif
#ifndef PULSE_TIMER_NUM
#define PULSE_TIMER_NUM STEP_TIMER_NUM #define PULSE_TIMER_NUM STEP_TIMER_NUM
#endif
#ifndef TEMP_TIMER_NUM
#define TEMP_TIMER_NUM 1 // Timer Index for Temperature
#endif
#define TEMP_TIMER_PRESCALE 1000 // prescaler for setting Temp timer, 72Khz #define TEMP_TIMER_PRESCALE 1000 // prescaler for setting Temp timer, 72Khz
#define TEMP_TIMER_FREQUENCY 1000 // temperature interrupt frequency #define TEMP_TIMER_FREQUENCY 1000 // temperature interrupt frequency
@ -59,17 +65,19 @@
// TODO change this // TODO change this
#ifdef STM32GENERIC #ifdef STM32GENERIC
extern void TC5_Handler(); #define TC_TIMER_ARGS
extern void TC7_Handler();
#define HAL_STEP_TIMER_ISR() void TC5_Handler()
#define HAL_TEMP_TIMER_ISR() void TC7_Handler()
#else #else
extern void TC5_Handler(stimer_t *htim); #define TC_TIMER_ARGS stimer_t *htim
extern void TC7_Handler(stimer_t *htim);
#define HAL_STEP_TIMER_ISR() void TC5_Handler(stimer_t *htim)
#define HAL_TEMP_TIMER_ISR() void TC7_Handler(stimer_t *htim)
#endif #endif
extern void TC5_Handler(TC_TIMER_ARGS);
extern void TC7_Handler(TC_TIMER_ARGS);
#ifndef HAL_STEP_TIMER_ISR
#define HAL_STEP_TIMER_ISR() void TC5_Handler(TC_TIMER_ARGS)
#endif
#ifndef HAL_TEMP_TIMER_ISR
#define HAL_TEMP_TIMER_ISR() void TC7_Handler(TC_TIMER_ARGS)
#endif
// ------------------------ // ------------------------
// Types // Types

3
Marlin/src/HAL/STM32_F4_F7/STM32F7/timers.cpp
View File

@ -21,8 +21,7 @@
*/ */
#if defined(STM32GENERIC) && defined(STM32F7) #if defined(STM32GENERIC) && defined(STM32F7)
#include "../HAL.h" #include "../../../inc/MarlinConfig.h"
#include "timers.h"
// ------------------------ // ------------------------
// Local defines // Local defines

14
Marlin/src/HAL/STM32_F4_F7/STM32F7/timers.h
View File

@ -34,9 +34,15 @@
#define HAL_TIMER_RATE (HAL_RCC_GetSysClockFreq() / 2) // frequency of timer peripherals #define HAL_TIMER_RATE (HAL_RCC_GetSysClockFreq() / 2) // frequency of timer peripherals
#define STEP_TIMER_NUM 0 // index of timer to use for stepper #ifndef STEP_TIMER_NUM
#define TEMP_TIMER_NUM 1 // index of timer to use for temperature #define STEP_TIMER_NUM 0 // Timer Index for Stepper
#endif
#ifndef PULSE_TIMER_NUM
#define PULSE_TIMER_NUM STEP_TIMER_NUM #define PULSE_TIMER_NUM STEP_TIMER_NUM
#endif
#ifndef TEMP_TIMER_NUM
#define TEMP_TIMER_NUM 1 // Timer Index for Temperature
#endif
#define TEMP_TIMER_FREQUENCY 1000 // temperature interrupt frequency #define TEMP_TIMER_FREQUENCY 1000 // temperature interrupt frequency
#define TEMP_TIMER_PRESCALE 1000 // prescaler for setting Temp timer, 72Khz #define TEMP_TIMER_PRESCALE 1000 // prescaler for setting Temp timer, 72Khz
@ -62,8 +68,12 @@
extern void TC5_Handler(); extern void TC5_Handler();
extern void TC7_Handler(); extern void TC7_Handler();
#ifndef HAL_STEP_TIMER_ISR
#define HAL_STEP_TIMER_ISR() void TC5_Handler() #define HAL_STEP_TIMER_ISR() void TC5_Handler()
#endif
#ifndef HAL_TEMP_TIMER_ISR
#define HAL_TEMP_TIMER_ISR() void TC7_Handler() #define HAL_TEMP_TIMER_ISR() void TC7_Handler()
#endif
// ------------------------ // ------------------------
// Types // Types

1
Marlin/src/HAL/TEENSY31_32/HAL.h
View File

@ -34,7 +34,6 @@
#include "fastio.h" #include "fastio.h"
#include "watchdog.h" #include "watchdog.h"
#include "timers.h"
#include <stdint.h> #include <stdint.h>

3
Marlin/src/HAL/TEENSY31_32/timers.cpp
View File

@ -26,8 +26,7 @@
#ifdef __MK20DX256__ #ifdef __MK20DX256__
#include "HAL.h" #include "../../inc/MarlinConfig.h"
#include "timers.h"
/** \brief Instruction Synchronization Barrier /** \brief Instruction Synchronization Barrier
Instruction Synchronization Barrier flushes the pipeline in the processor, Instruction Synchronization Barrier flushes the pipeline in the processor,

14
Marlin/src/HAL/TEENSY31_32/timers.h
View File

@ -47,9 +47,15 @@ typedef uint32_t hal_timer_t;
#define HAL_TIMER_RATE (FTM0_TIMER_RATE) #define HAL_TIMER_RATE (FTM0_TIMER_RATE)
#define STEP_TIMER_NUM 0 #ifndef STEP_TIMER_NUM
#define TEMP_TIMER_NUM 1 #define STEP_TIMER_NUM 0 // Timer Index for Stepper
#endif
#ifndef PULSE_TIMER_NUM
#define PULSE_TIMER_NUM STEP_TIMER_NUM #define PULSE_TIMER_NUM STEP_TIMER_NUM
#endif
#ifndef TEMP_TIMER_NUM
#define TEMP_TIMER_NUM 1 // Timer Index for Temperature
#endif
#define TEMP_TIMER_FREQUENCY 1000 #define TEMP_TIMER_FREQUENCY 1000
@ -68,8 +74,12 @@ typedef uint32_t hal_timer_t;
#define ENABLE_TEMPERATURE_INTERRUPT() HAL_timer_enable_interrupt(TEMP_TIMER_NUM) #define ENABLE_TEMPERATURE_INTERRUPT() HAL_timer_enable_interrupt(TEMP_TIMER_NUM)
#define DISABLE_TEMPERATURE_INTERRUPT() HAL_timer_disable_interrupt(TEMP_TIMER_NUM) #define DISABLE_TEMPERATURE_INTERRUPT() HAL_timer_disable_interrupt(TEMP_TIMER_NUM)
#ifndef HAL_STEP_TIMER_ISR
#define HAL_STEP_TIMER_ISR() extern "C" void ftm0_isr() //void TC3_Handler() #define HAL_STEP_TIMER_ISR() extern "C" void ftm0_isr() //void TC3_Handler()
#endif
#ifndef HAL_TEMP_TIMER_ISR
#define HAL_TEMP_TIMER_ISR() extern "C" void ftm1_isr() //void TC4_Handler() #define HAL_TEMP_TIMER_ISR() extern "C" void ftm1_isr() //void TC4_Handler()
#endif
void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency); void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency);

2
Marlin/src/HAL/TEENSY35_36/HAL.h
View File

@ -34,8 +34,6 @@
#include "fastio.h" #include "fastio.h"
#include "watchdog.h" #include "watchdog.h"
#include "timers.h"
#include <stdint.h> #include <stdint.h>
#include <util/atomic.h> #include <util/atomic.h>

3
Marlin/src/HAL/TEENSY35_36/timers.cpp
View File

@ -27,8 +27,7 @@
#if defined(__MK64FX512__) || defined(__MK66FX1M0__) #if defined(__MK64FX512__) || defined(__MK66FX1M0__)
#include "HAL.h" #include "../../inc/MarlinConfig.h"
#include "timers.h"
/** \brief Instruction Synchronization Barrier /** \brief Instruction Synchronization Barrier
Instruction Synchronization Barrier flushes the pipeline in the processor, Instruction Synchronization Barrier flushes the pipeline in the processor,

14
Marlin/src/HAL/TEENSY35_36/timers.h
View File

@ -46,9 +46,15 @@ typedef uint32_t hal_timer_t;
#define HAL_TIMER_RATE (FTM0_TIMER_RATE) #define HAL_TIMER_RATE (FTM0_TIMER_RATE)
#define STEP_TIMER_NUM 0 #ifndef STEP_TIMER_NUM
#define TEMP_TIMER_NUM 1 #define STEP_TIMER_NUM 0 // Timer Index for Stepper
#endif
#ifndef PULSE_TIMER_NUM
#define PULSE_TIMER_NUM STEP_TIMER_NUM #define PULSE_TIMER_NUM STEP_TIMER_NUM
#endif
#ifndef TEMP_TIMER_NUM
#define TEMP_TIMER_NUM 1 // Timer Index for Temperature
#endif
#define TEMP_TIMER_FREQUENCY 1000 #define TEMP_TIMER_FREQUENCY 1000
@ -67,8 +73,12 @@ typedef uint32_t hal_timer_t;
#define ENABLE_TEMPERATURE_INTERRUPT() HAL_timer_enable_interrupt(TEMP_TIMER_NUM) #define ENABLE_TEMPERATURE_INTERRUPT() HAL_timer_enable_interrupt(TEMP_TIMER_NUM)
#define DISABLE_TEMPERATURE_INTERRUPT() HAL_timer_disable_interrupt(TEMP_TIMER_NUM) #define DISABLE_TEMPERATURE_INTERRUPT() HAL_timer_disable_interrupt(TEMP_TIMER_NUM)
#ifndef HAL_STEP_TIMER_ISR
#define HAL_STEP_TIMER_ISR() extern "C" void ftm0_isr() //void TC3_Handler() #define HAL_STEP_TIMER_ISR() extern "C" void ftm0_isr() //void TC3_Handler()
#endif
#ifndef HAL_TEMP_TIMER_ISR
#define HAL_TEMP_TIMER_ISR() extern "C" void ftm1_isr() //void TC4_Handler() #define HAL_TEMP_TIMER_ISR() extern "C" void ftm1_isr() //void TC4_Handler()
#endif
void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency); void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency);

1
Marlin/src/inc/MarlinConfig.h
View File

@ -30,6 +30,7 @@
#include "../HAL/HAL.h" #include "../HAL/HAL.h"
#include "../pins/pins.h" #include "../pins/pins.h"
#include HAL_PATH(../HAL, timers.h)
#include HAL_PATH(../HAL, spi_pins.h) #include HAL_PATH(../HAL, spi_pins.h)
#include "Conditionals_post.h" #include "Conditionals_post.h"

1
Marlin/src/pins/sam/pins_ARCHIM1.h
View File

@ -46,6 +46,7 @@
// //
// Timers // Timers
// //
// These are already defined in DUE, so must be undefined first
#define STEP_TIMER_NUM 3 #define STEP_TIMER_NUM 3
#define HAL_STEP_TIMER_ISR() void TC3_Handler() #define HAL_STEP_TIMER_ISR() void TC3_Handler()