From 348004c34fc58dbcb5eb697b4d3dc598628e2adf Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Wed, 3 Oct 2018 03:26:07 -0500 Subject: [PATCH] STM32F7 HAL using the official STM32 Arduino Core (#11750) --- Marlin/src/HAL/HAL_STM32/HAL.cpp | 126 ++++++++++ Marlin/src/HAL/HAL_STM32/HAL.h | 220 ++++++++++++++++++ Marlin/src/HAL/HAL_STM32/HAL_Servo_STM32.cpp | 57 +++++ Marlin/src/HAL/HAL_STM32/HAL_Servo_STM32.h | 36 +++ Marlin/src/HAL/HAL_STM32/HAL_spi_STM32.cpp | 159 +++++++++++++ Marlin/src/HAL/HAL_STM32/HAL_timers_STM32.cpp | 117 ++++++++++ Marlin/src/HAL/HAL_STM32/HAL_timers_STM32.h | 168 +++++++++++++ Marlin/src/HAL/HAL_STM32/README.md | 11 + Marlin/src/HAL/HAL_STM32/SanityCheck.h | 71 ++++++ Marlin/src/HAL/HAL_STM32/endstop_interrupts.h | 59 +++++ Marlin/src/HAL/HAL_STM32/fastio_STM32.h | 53 +++++ .../HAL/HAL_STM32/persistent_store_impl.cpp | 103 ++++++++ Marlin/src/HAL/HAL_STM32/pinsDebug.h | 1 + Marlin/src/HAL/HAL_STM32/spi_pins.h | 36 +++ Marlin/src/HAL/HAL_STM32/watchdog_STM32.cpp | 37 +++ Marlin/src/HAL/HAL_STM32/watchdog_STM32.h | 27 +++ Marlin/src/HAL/platforms.h | 6 +- .../src/HAL/shared/backtrace/unwmemaccess.cpp | 14 +- Marlin/src/HAL/shared/servo.cpp | 2 +- Marlin/src/HAL/shared/servo.h | 6 +- Marlin/src/core/boards.h | 1 + .../dogm/ultralcd_st7920_u8glib_rrd_AVR.cpp | 4 + Marlin/src/pins/pins.h | 2 + Marlin/src/pins/pins_REMRAM_V1.h | 126 ++++++++++ 24 files changed, 1436 insertions(+), 6 deletions(-) create mode 100644 Marlin/src/HAL/HAL_STM32/HAL.cpp create mode 100644 Marlin/src/HAL/HAL_STM32/HAL.h create mode 100644 Marlin/src/HAL/HAL_STM32/HAL_Servo_STM32.cpp create mode 100644 Marlin/src/HAL/HAL_STM32/HAL_Servo_STM32.h create mode 100644 Marlin/src/HAL/HAL_STM32/HAL_spi_STM32.cpp create mode 100644 Marlin/src/HAL/HAL_STM32/HAL_timers_STM32.cpp create mode 100644 Marlin/src/HAL/HAL_STM32/HAL_timers_STM32.h create mode 100644 Marlin/src/HAL/HAL_STM32/README.md create mode 100644 Marlin/src/HAL/HAL_STM32/SanityCheck.h create mode 100644 Marlin/src/HAL/HAL_STM32/endstop_interrupts.h create mode 100644 Marlin/src/HAL/HAL_STM32/fastio_STM32.h create mode 100644 Marlin/src/HAL/HAL_STM32/persistent_store_impl.cpp create mode 100644 Marlin/src/HAL/HAL_STM32/pinsDebug.h create mode 100644 Marlin/src/HAL/HAL_STM32/spi_pins.h create mode 100644 Marlin/src/HAL/HAL_STM32/watchdog_STM32.cpp create mode 100644 Marlin/src/HAL/HAL_STM32/watchdog_STM32.h create mode 100644 Marlin/src/pins/pins_REMRAM_V1.h diff --git a/Marlin/src/HAL/HAL_STM32/HAL.cpp b/Marlin/src/HAL/HAL_STM32/HAL.cpp new file mode 100644 index 000000000..2cef2bd0e --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32/HAL.cpp @@ -0,0 +1,126 @@ +/** + * Marlin 3D Printer Firmware + * + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com + * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com + * Copyright (c) 2017 Victor Perez + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifdef ARDUINO_ARCH_STM32 + +// -------------------------------------------------------------------------- +// Includes +// -------------------------------------------------------------------------- + +#include "HAL.h" + +#if ENABLED(EEPROM_EMULATED_WITH_SRAM) + #if STM32F7xx + #include "stm32f7xx_ll_pwr.h" + #else + #error "EEPROM_EMULATED_WITH_SRAM is currently only supported for STM32F7xx" + #endif +#endif // EEPROM_EMULATED_WITH_SRAM + +// -------------------------------------------------------------------------- +// Externals +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Local defines +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Types +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Variables +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Public Variables +// -------------------------------------------------------------------------- + +uint16_t HAL_adc_result; + +// -------------------------------------------------------------------------- +// Private Variables +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Function prototypes +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Private functions +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Public functions +// -------------------------------------------------------------------------- + +// HAL initialization task +void HAL_init(void) { + + #if ENABLED(SDSUPPORT) + OUT_WRITE(SDSS, HIGH); // Try to set SDSS inactive before any other SPI users start up + #endif + + #if ENABLED(EEPROM_EMULATED_WITH_SRAM) + // Enable access to backup SRAM + __HAL_RCC_PWR_CLK_ENABLE(); + HAL_PWR_EnableBkUpAccess(); + __HAL_RCC_BKPSRAM_CLK_ENABLE(); + + // Enable backup regulator + LL_PWR_EnableBkUpRegulator(); + // Wait until backup regulator is initialized + while (!LL_PWR_IsActiveFlag_BRR()); + #endif // EEPROM_EMULATED_SRAM +} + +void HAL_clear_reset_source(void) { __HAL_RCC_CLEAR_RESET_FLAGS(); } + +uint8_t HAL_get_reset_source (void) { + if (__HAL_RCC_GET_FLAG(RCC_FLAG_IWDGRST) != RESET) return RST_WATCHDOG; + if (__HAL_RCC_GET_FLAG(RCC_FLAG_SFTRST) != RESET) return RST_SOFTWARE; + if (__HAL_RCC_GET_FLAG(RCC_FLAG_PINRST) != RESET) return RST_EXTERNAL; + if (__HAL_RCC_GET_FLAG(RCC_FLAG_PORRST) != RESET) return RST_POWER_ON; + return 0; +} + +void _delay_ms(const int delay_ms) { delay(delay_ms); } + +extern "C" { + extern unsigned int _ebss; // end of bss section +} + +// -------------------------------------------------------------------------- +// ADC +// -------------------------------------------------------------------------- + +void HAL_adc_start_conversion(const uint8_t adc_pin) { + HAL_adc_result = analogRead(adc_pin); +} + +uint16_t HAL_adc_get_result(void) { + return HAL_adc_result; +} + +#endif // ARDUINO_ARCH_STM32 diff --git a/Marlin/src/HAL/HAL_STM32/HAL.h b/Marlin/src/HAL/HAL_STM32/HAL.h new file mode 100644 index 000000000..29a0947fd --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32/HAL.h @@ -0,0 +1,220 @@ +/** + * Marlin 3D Printer Firmware + * + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com + * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com + * Copyright (c) 2017 Victor Perez + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#define CPU_32_BIT +#undef DEBUG_NONE + +#ifndef vsnprintf_P + #define vsnprintf_P vsnprintf +#endif + +// -------------------------------------------------------------------------- +// Includes +// -------------------------------------------------------------------------- + +#include + +#include "Arduino.h" + +#ifdef USBCON + #include +#endif + +#include "../shared/math_32bit.h" +#include "../shared/HAL_SPI.h" +#include "fastio_STM32.h" +#include "watchdog_STM32.h" + +#include "HAL_timers_STM32.h" + +// -------------------------------------------------------------------------- +// Defines +// -------------------------------------------------------------------------- + +#if SERIAL_PORT == 0 + #error "Serial port 0 does not exist" +#endif + +#if !WITHIN(SERIAL_PORT, -1, 6) + #error "SERIAL_PORT must be from -1 to 6" +#endif +#if SERIAL_PORT == -1 + #define MYSERIAL0 SerialUSB +#elif SERIAL_PORT == 1 + #define MYSERIAL0 Serial1 +#elif SERIAL_PORT == 2 + #define MYSERIAL0 Serial2 +#elif SERIAL_PORT == 3 + #define MYSERIAL0 Serial3 +#elif SERIAL_PORT == 4 + #define MYSERIAL0 Serial4 +#elif SERIAL_PORT == 5 + #define MYSERIAL0 Serial5 +#elif SERIAL_PORT == 6 + #define MYSERIAL0 Serial6 +#endif + +#ifdef SERIAL_PORT_2 + #if SERIAL_PORT_2 == 0 + #error "Serial port 0 does not exist" + #endif + + #if !WITHIN(SERIAL_PORT_2, -1, 6) + #error "SERIAL_PORT_2 must be from -1 to 6" + #elif SERIAL_PORT_2 == SERIAL_PORT + #error "SERIAL_PORT_2 must be different than SERIAL_PORT" + #endif + #define NUM_SERIAL 2 + #if SERIAL_PORT_2 == -1 + #define MYSERIAL1 Serial0 // TODO Once CDC is supported + #elif SERIAL_PORT_2 == 1 + #define MYSERIAL1 Serial1 + #elif SERIAL_PORT_2 == 2 + #define MYSERIAL1 Serial2 + #elif SERIAL_PORT_2 == 3 + #define MYSERIAL1 Serial3 + #elif SERIAL_PORT_2 == 4 + #define MYSERIAL1 Serial4 + #elif SERIAL_PORT_2 == 5 + #define MYSERIAL1 Serial5 + #elif SERIAL_PORT_2 == 6 + #define MYSERIAL1 Serial6 + #endif +#else + #define NUM_SERIAL 1 +#endif + +#define _BV(b) (1 << (b)) + +/** + * TODO: review this to return 1 for pins that are not analog input + */ +#ifndef analogInputToDigitalPin + #define analogInputToDigitalPin(p) (p) +#endif + +#define CRITICAL_SECTION_START uint32_t primask = __get_PRIMASK(); __disable_irq() +#define CRITICAL_SECTION_END if (!primask) __enable_irq() +#define ISRS_ENABLED() (!__get_PRIMASK()) +#define ENABLE_ISRS() __enable_irq() +#define DISABLE_ISRS() __disable_irq() +#define cli() __disable_irq() +#define sei() __enable_irq() + +// On AVR this is in math.h? +#define square(x) ((x)*(x)) + +#ifndef strncpy_P + #define strncpy_P(dest, src, num) strncpy((dest), (src), (num)) +#endif + +// Fix bug in pgm_read_ptr +#undef pgm_read_ptr +#define pgm_read_ptr(addr) (*(addr)) + +#define RST_POWER_ON 1 +#define RST_EXTERNAL 2 +#define RST_BROWN_OUT 4 +#define RST_WATCHDOG 8 +#define RST_JTAG 16 +#define RST_SOFTWARE 32 +#define RST_BACKUP 64 + +// -------------------------------------------------------------------------- +// Types +// -------------------------------------------------------------------------- + +typedef int8_t pin_t; + +#define HAL_SERVO_LIB libServo + +// -------------------------------------------------------------------------- +// Public Variables +// -------------------------------------------------------------------------- + +/** result of last ADC conversion */ +extern uint16_t HAL_adc_result; + +// -------------------------------------------------------------------------- +// Public functions +// -------------------------------------------------------------------------- + +// Memory related +#define __bss_end __bss_end__ + +// Enable hooks into setup for HAL +#define HAL_INIT 1 +void HAL_init(void); + +/** clear reset reason */ +void HAL_clear_reset_source (void); + +/** reset reason */ +uint8_t HAL_get_reset_source (void); + +void _delay_ms(const int delay); + +extern "C" char* _sbrk(int incr); + +static int freeMemory() { + volatile char top; + return &top - reinterpret_cast(_sbrk(0)); +} + +// SPI: Extended functions which take a channel number (hardware SPI only) +/** Write single byte to specified SPI channel */ +void spiSend(uint32_t chan, byte b); +/** Write buffer to specified SPI channel */ +void spiSend(uint32_t chan, const uint8_t* buf, size_t n); +/** Read single byte from specified SPI channel */ +uint8_t spiRec(uint32_t chan); + + +// EEPROM + +/** + * Wire library should work for i2c eeproms. + */ +void eeprom_write_byte(unsigned char *pos, unsigned char value); +unsigned char eeprom_read_byte(unsigned char *pos); +void eeprom_read_block (void *__dst, const void *__src, size_t __n); +void eeprom_update_block (const void *__src, void *__dst, size_t __n); + +// ADC + +#define HAL_ANALOG_SELECT(pin) pinMode(pin, INPUT) + +inline void HAL_adc_init(void) {} + +#define HAL_START_ADC(pin) HAL_adc_start_conversion(pin) +#define HAL_READ_ADC() HAL_adc_result +#define HAL_ADC_READY() true + +void HAL_adc_start_conversion(const uint8_t adc_pin); + +uint16_t HAL_adc_get_result(void); + +#define GET_PIN_MAP_PIN(index) index +#define GET_PIN_MAP_INDEX(pin) pin +#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval) diff --git a/Marlin/src/HAL/HAL_STM32/HAL_Servo_STM32.cpp b/Marlin/src/HAL/HAL_STM32/HAL_Servo_STM32.cpp new file mode 100644 index 000000000..2b08ab314 --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32/HAL_Servo_STM32.cpp @@ -0,0 +1,57 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * Copyright (C) 2017 Victor Perez + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#ifdef ARDUINO_ARCH_STM32 + +#include "../../inc/MarlinConfig.h" + +#if HAS_SERVOS + +#include "HAL_Servo_STM32.h" + +uint8_t servoPin[MAX_SERVOS] = { 0 }; + +int8_t libServo::attach(const int pin) { + if (this->servoIndex >= MAX_SERVOS) return -1; + if (pin > 0) servoPin[this->servoIndex] = pin; + return Servo::attach(servoPin[this->servoIndex]); +} + +int8_t libServo::attach(const int pin, const int min, const int max) { + if (pin > 0) servoPin[this->servoIndex] = pin; + return Servo::attach(servoPin[this->servoIndex], min, max); +} + +void libServo::move(const int value) { + constexpr uint16_t servo_delay[] = SERVO_DELAY; + static_assert(COUNT(servo_delay) == NUM_SERVOS, "SERVO_DELAY must be an array NUM_SERVOS long."); + if (this->attach(0) >= 0) { + this->write(value); + safe_delay(servo_delay[this->servoIndex]); + #if ENABLED(DEACTIVATE_SERVOS_AFTER_MOVE) + this->detach(); + #endif + } +} +#endif // HAS_SERVOS + +#endif // ARDUINO_ARCH_STM32 diff --git a/Marlin/src/HAL/HAL_STM32/HAL_Servo_STM32.h b/Marlin/src/HAL/HAL_STM32/HAL_Servo_STM32.h new file mode 100644 index 000000000..0aa93ba9f --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32/HAL_Servo_STM32.h @@ -0,0 +1,36 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * Copyright (C) 2017 Victor Perez + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#include + +// Inherit and expand on the official library +class libServo : public Servo { + public: + int8_t attach(const int pin); + int8_t attach(const int pin, const int min, const int max); + void move(const int value); + private: + uint16_t min_ticks, max_ticks; + uint8_t servoIndex; // index into the channel data for this servo +}; diff --git a/Marlin/src/HAL/HAL_STM32/HAL_spi_STM32.cpp b/Marlin/src/HAL/HAL_STM32/HAL_spi_STM32.cpp new file mode 100644 index 000000000..ccaee992d --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32/HAL_spi_STM32.cpp @@ -0,0 +1,159 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * Copyright (C) 2017 Victor Perez + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#ifdef ARDUINO_ARCH_STM32 + +// -------------------------------------------------------------------------- +// Includes +// -------------------------------------------------------------------------- + +#include "HAL.h" +#include "../shared/HAL_SPI.h" +#include "pins_arduino.h" +#include "spi_pins.h" +#include "../../core/macros.h" + +#include + +// -------------------------------------------------------------------------- +// Public Variables +// -------------------------------------------------------------------------- + +static SPISettings spiConfig; + +// -------------------------------------------------------------------------- +// Public functions +// -------------------------------------------------------------------------- + +#if ENABLED(SOFTWARE_SPI) + // -------------------------------------------------------------------------- + // Software SPI + // -------------------------------------------------------------------------- + #error "Software SPI not supported for STM32F7. Use Hardware SPI." + +#else + +// -------------------------------------------------------------------------- +// Hardware SPI +// -------------------------------------------------------------------------- + +/** + * VGPV SPI speed start and PCLK2/2, by default 108/2 = 54Mhz + */ + +/** + * @brief Begin SPI port setup + * + * @return Nothing + * + * @details Only configures SS pin since stm32duino creates and initialize the SPI object + */ +void spiBegin(void) { + #if !PIN_EXISTS(SS) + #error "SS_PIN not defined!" + #endif + + SET_OUTPUT(SS_PIN); + WRITE(SS_PIN, HIGH); +} + +/** Configure SPI for specified SPI speed */ +void spiInit(uint8_t spiRate) { + // Use datarates Marlin uses + uint32_t clock; + switch (spiRate) { + case SPI_FULL_SPEED: clock = 20000000; break; // 13.9mhz=20000000 6.75mhz=10000000 3.38mhz=5000000 .833mhz=1000000 + case SPI_HALF_SPEED: clock = 5000000; break; + case SPI_QUARTER_SPEED: clock = 2500000; break; + case SPI_EIGHTH_SPEED: clock = 1250000; break; + case SPI_SPEED_5: clock = 625000; break; + case SPI_SPEED_6: clock = 300000; break; + default: + clock = 4000000; // Default from the SPI library + } + spiConfig = SPISettings(clock, MSBFIRST, SPI_MODE0); + SPI.begin(); +} + +/** + * @brief Receives a single byte from the SPI port. + * + * @return Byte received + * + * @details + */ +uint8_t spiRec(void) { + SPI.beginTransaction(spiConfig); + uint8_t returnByte = SPI.transfer(0xFF); + SPI.endTransaction(); + return returnByte; +} + +/** + * @brief Receives a number of bytes from the SPI port to a buffer + * + * @param buf Pointer to starting address of buffer to write to. + * @param nbyte Number of bytes to receive. + * @return Nothing + * + * @details Uses DMA + */ +void spiRead(uint8_t* buf, uint16_t nbyte) { + if (nbyte == 0) return; + SPI.beginTransaction(spiConfig); + for (int i = 0; i < nbyte; i++) { + buf[i] = SPI.transfer(0xFF); + } + SPI.endTransaction(); +} + +/** + * @brief Sends a single byte on SPI port + * + * @param b Byte to send + * + * @details + */ +void spiSend(uint8_t b) { + SPI.beginTransaction(spiConfig); + SPI.transfer(b); + SPI.endTransaction(); +} + +/** + * @brief Write token and then write from 512 byte buffer to SPI (for SD card) + * + * @param buf Pointer with buffer start address + * @return Nothing + * + * @details Use DMA + */ +void spiSendBlock(uint8_t token, const uint8_t* buf) { + SPI.beginTransaction(spiConfig); + SPI.transfer(token); + SPI.transfer((uint8_t*)buf, (uint8_t*)0, 512); + SPI.endTransaction(); +} + +#endif // SOFTWARE_SPI + +#endif // ARDUINO_ARCH_STM32 diff --git a/Marlin/src/HAL/HAL_STM32/HAL_timers_STM32.cpp b/Marlin/src/HAL/HAL_STM32/HAL_timers_STM32.cpp new file mode 100644 index 000000000..fd19ce38d --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32/HAL_timers_STM32.cpp @@ -0,0 +1,117 @@ +/** + * Marlin 3D Printer Firmware + * + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com + * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#ifdef ARDUINO_ARCH_STM32 + +// -------------------------------------------------------------------------- +// Includes +// -------------------------------------------------------------------------- + +#include "HAL.h" + +#include "HAL_timers_STM32.h" + +// -------------------------------------------------------------------------- +// Externals +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Local defines +// -------------------------------------------------------------------------- + +#define NUM_HARDWARE_TIMERS 2 + +//#define PRESCALER 1 +// -------------------------------------------------------------------------- +// Types +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Public Variables +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Private Variables +// -------------------------------------------------------------------------- + +stm32f4_timer_t TimerHandle[NUM_HARDWARE_TIMERS]; + +// -------------------------------------------------------------------------- +// Function prototypes +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Private functions +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Public functions +// -------------------------------------------------------------------------- + +bool timers_initialised[NUM_HARDWARE_TIMERS] = {false}; + +void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) { + + if (!timers_initialised[timer_num]) { + constexpr uint32_t step_prescaler = STEPPER_TIMER_PRESCALE - 1, + temp_prescaler = TEMP_TIMER_PRESCALE - 1; + switch (timer_num) { + case STEP_TIMER_NUM: + // STEPPER TIMER - use a 32bit timer if possible + TimerHandle[timer_num].timer = STEP_TIMER_DEV; + TimerHandle[timer_num].irqHandle = Step_Handler; + TimerHandleInit(&TimerHandle[timer_num], (((HAL_TIMER_RATE) / step_prescaler) / frequency) - 1, step_prescaler); + HAL_NVIC_SetPriority(STEP_TIMER_IRQ_NAME, 6, 0); + break; + + case TEMP_TIMER_NUM: + // TEMP TIMER - any available 16bit Timer + TimerHandle[timer_num].timer = TEMP_TIMER_DEV; + TimerHandle[timer_num].irqHandle = Temp_Handler; + TimerHandleInit(&TimerHandle[timer_num], (((HAL_TIMER_RATE) / temp_prescaler) / frequency) - 1, temp_prescaler); + HAL_NVIC_SetPriority(TEMP_TIMER_IRQ_NAME, 2, 0); + break; + } + timers_initialised[timer_num] = true; + } +} + +void HAL_timer_enable_interrupt(const uint8_t timer_num) { + const IRQn_Type IRQ_Id = IRQn_Type(getTimerIrq(TimerHandle[timer_num].timer)); + HAL_NVIC_EnableIRQ(IRQ_Id); +} + +void HAL_timer_disable_interrupt(const uint8_t timer_num) { + const IRQn_Type IRQ_Id = IRQn_Type(getTimerIrq(TimerHandle[timer_num].timer)); + HAL_NVIC_DisableIRQ(IRQ_Id); + + // We NEED memory barriers to ensure Interrupts are actually disabled! + // ( https://dzone.com/articles/nvic-disabling-interrupts-on-arm-cortex-m-and-the ) + __DSB(); + __ISB(); +} + +bool HAL_timer_interrupt_enabled(const uint8_t timer_num) { + const uint32_t IRQ_Id = getTimerIrq(TimerHandle[timer_num].timer); + return NVIC->ISER[IRQ_Id >> 5] & _BV32(IRQ_Id & 0x1F); +} + +#endif // ARDUINO_ARCH_STM32 diff --git a/Marlin/src/HAL/HAL_STM32/HAL_timers_STM32.h b/Marlin/src/HAL/HAL_STM32/HAL_timers_STM32.h new file mode 100644 index 000000000..bcc355ab5 --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32/HAL_timers_STM32.h @@ -0,0 +1,168 @@ +/** + * Marlin 3D Printer Firmware + * + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com + * Copyright (c) 2017 Victor Perez + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +// -------------------------------------------------------------------------- +// Includes +// -------------------------------------------------------------------------- + +#include + +// -------------------------------------------------------------------------- +// Defines +// -------------------------------------------------------------------------- + +#define FORCE_INLINE __attribute__((always_inline)) inline + +#define hal_timer_t uint32_t // TODO: One is 16-bit, one 32-bit - does this need to be checked? +#define HAL_TIMER_TYPE_MAX 0xFFFF + +#ifdef STM32F0xx + + #define HAL_TIMER_RATE (HAL_RCC_GetSysClockFreq()) // frequency of timer peripherals + #define TEMP_TIMER_PRESCALE 666 // prescaler for setting temperature timer, 72Khz + #define STEPPER_TIMER_PRESCALE 24 // prescaler for setting stepper timer, 2Mhz + + #define STEP_TIMER 16 + #define TEMP_TIMER 17 + +#elif defined STM32F1xx + + #define HAL_TIMER_RATE (HAL_RCC_GetPCLK2Freq()) // frequency of timer peripherals + #define TEMP_TIMER_PRESCALE 1000 // prescaler for setting temperature timer, 72Khz + #define STEPPER_TIMER_PRESCALE 36 // prescaler for setting stepper timer, 2Mhz. + + #define STEP_TIMER 4 + #define TEMP_TIMER 2 + +#elif defined STM32F4xx + + #define HAL_TIMER_RATE (HAL_RCC_GetPCLK2Freq()) // frequency of timer peripherals + #define TEMP_TIMER_PRESCALE 2333 // prescaler for setting temperature timer, 72Khz + #define STEPPER_TIMER_PRESCALE 84 // prescaler for setting stepper timer, 2Mhz + + #define STEP_TIMER 4 + #define TEMP_TIMER 5 + +#elif defined STM32F7xx + + #define HAL_TIMER_RATE (HAL_RCC_GetSysClockFreq()/2) // frequency of timer peripherals + #define TEMP_TIMER_PRESCALE 1500 // prescaler for setting temperature timer, 72Khz + #define STEPPER_TIMER_PRESCALE 54 // prescaler for setting stepper timer, 2Mhz. + + #define STEP_TIMER 5 + #define TEMP_TIMER 7 + + #if MB(REMRAM_V1) + #define STEP_TIMER 2 + #endif + +#endif + +#define STEP_TIMER_NUM 0 // index of timer to use for stepper +#define TEMP_TIMER_NUM 1 // index of timer to use for temperature +#define PULSE_TIMER_NUM STEP_TIMER_NUM + +#define STEPPER_TIMER_RATE (HAL_TIMER_RATE / STEPPER_TIMER_PRESCALE) // frequency of stepper timer +#define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000) // stepper timer ticks per µs + +#define TEMP_TIMER_FREQUENCY 1000 // temperature interrupt frequency + +#define PULSE_TIMER_RATE STEPPER_TIMER_RATE // frequency of pulse timer +#define PULSE_TIMER_PRESCALE STEPPER_TIMER_PRESCALE +#define PULSE_TIMER_TICKS_PER_US STEPPER_TIMER_TICKS_PER_US + +#define __TIMER_DEV(X) TIM##X +#define _TIMER_DEV(X) __TIMER_DEV(X) +#define STEP_TIMER_DEV _TIMER_DEV(STEP_TIMER) +#define TEMP_TIMER_DEV _TIMER_DEV(TEMP_TIMER) + +#define __TIMER_CALLBACK(X) TIM##X##_IRQHandler +#define _TIMER_CALLBACK(X) __TIMER_CALLBACK(X) + +#define STEP_TIMER_CALLBACK _TIMER_CALLBACK(STEP_TIMER) +#define TEMP_TIMER_CALLBACK _TIMER_CALLBACK(TEMP_TIMER) + +#define __TIMER_IRQ_NAME(X) TIM##X##_IRQn +#define _TIMER_IRQ_NAME(X) __TIMER_IRQ_NAME(X) + +#define STEP_TIMER_IRQ_NAME _TIMER_IRQ_NAME(STEP_TIMER) +#define TEMP_TIMER_IRQ_NAME _TIMER_IRQ_NAME(TEMP_TIMER) + +#define ENABLE_STEPPER_DRIVER_INTERRUPT() HAL_timer_enable_interrupt(STEP_TIMER_NUM) +#define DISABLE_STEPPER_DRIVER_INTERRUPT() HAL_timer_disable_interrupt(STEP_TIMER_NUM) +#define STEPPER_ISR_ENABLED() HAL_timer_interrupt_enabled(STEP_TIMER_NUM) + +#define ENABLE_TEMPERATURE_INTERRUPT() HAL_timer_enable_interrupt(TEMP_TIMER_NUM) +#define DISABLE_TEMPERATURE_INTERRUPT() HAL_timer_disable_interrupt(TEMP_TIMER_NUM) + +#define STEPPER_ISR_ENABLED() HAL_timer_interrupt_enabled(STEP_TIMER_NUM) +#define TEMP_ISR_ENABLED() HAL_timer_interrupt_enabled(TEMP_TIMER_NUM) + +extern void Step_Handler(stimer_t *htim); +extern void Temp_Handler(stimer_t *htim); +#define HAL_STEP_TIMER_ISR void Step_Handler(stimer_t *htim) +#define HAL_TEMP_TIMER_ISR void Temp_Handler(stimer_t *htim) + +// -------------------------------------------------------------------------- +// Types +// -------------------------------------------------------------------------- + +typedef stimer_t stm32f4_timer_t; + +// -------------------------------------------------------------------------- +// Public Variables +// -------------------------------------------------------------------------- + +extern stm32f4_timer_t TimerHandle[]; + +// -------------------------------------------------------------------------- +// Public functions +// -------------------------------------------------------------------------- + +void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency); +void HAL_timer_enable_interrupt(const uint8_t timer_num); +void HAL_timer_disable_interrupt(const uint8_t timer_num); +bool HAL_timer_interrupt_enabled(const uint8_t timer_num); + +FORCE_INLINE static uint32_t HAL_timer_get_count(const uint8_t timer_num) { + return __HAL_TIM_GET_COUNTER(&TimerHandle[timer_num].handle); +} + +FORCE_INLINE static void HAL_timer_set_compare(const uint8_t timer_num, const uint32_t compare) { + __HAL_TIM_SET_AUTORELOAD(&TimerHandle[timer_num].handle, compare); + if (HAL_timer_get_count(timer_num) >= compare) + TimerHandle[timer_num].handle.Instance->EGR |= TIM_EGR_UG; // Generate an immediate update interrupt +} + +FORCE_INLINE static hal_timer_t HAL_timer_get_compare(const uint8_t timer_num) { + return __HAL_TIM_GET_AUTORELOAD(&TimerHandle[timer_num].handle); +} + +FORCE_INLINE static void HAL_timer_restrain(const uint8_t timer_num, const uint16_t interval_ticks) { + const hal_timer_t mincmp = HAL_timer_get_count(timer_num) + interval_ticks; + if (HAL_timer_get_compare(timer_num) < mincmp) + HAL_timer_set_compare(timer_num, mincmp); +} + +#define HAL_timer_isr_prologue(TIMER_NUM) +#define HAL_timer_isr_epilogue(TIMER_NUM) diff --git a/Marlin/src/HAL/HAL_STM32/README.md b/Marlin/src/HAL/HAL_STM32/README.md new file mode 100644 index 000000000..7680df665 --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32/README.md @@ -0,0 +1,11 @@ +# Generic STM32 HAL based on the stm32duino core + +This HAL is intended to act as the generic STM32 HAL for all STM32 chips (The whole F, H and L family). + +Currently it supports: + * STM32F0xx + * STM32F1xx + * STM32F4xx + * STM32F7xx + +Targeting the official [Arduino STM32 Core](https://github.com/stm32duino/Arduino_Core_STM32). diff --git a/Marlin/src/HAL/HAL_STM32/SanityCheck.h b/Marlin/src/HAL/HAL_STM32/SanityCheck.h new file mode 100644 index 000000000..f434a51cb --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32/SanityCheck.h @@ -0,0 +1,71 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * Test Re-ARM specific configuration values for errors at compile-time. + */ +#if ENABLED(SPINDLE_LASER_ENABLE) + #if !PIN_EXISTS(SPINDLE_LASER_ENABLE) + #error "SPINDLE_LASER_ENABLE requires SPINDLE_LASER_ENABLE_PIN." + #elif SPINDLE_DIR_CHANGE && !PIN_EXISTS(SPINDLE_DIR) + #error "SPINDLE_DIR_PIN not defined." + #elif ENABLED(SPINDLE_LASER_PWM) && PIN_EXISTS(SPINDLE_LASER_PWM) + #if !PWM_PIN(SPINDLE_LASER_PWM_PIN) + #error "SPINDLE_LASER_PWM_PIN not assigned to a PWM pin." + #elif !(SPINDLE_LASER_PWM_PIN == 4 || SPINDLE_LASER_PWM_PIN == 6 || SPINDLE_LASER_PWM_PIN == 11) + #error "SPINDLE_LASER_PWM_PIN must use SERVO0, SERVO1 or SERVO3 connector" + #elif SPINDLE_LASER_POWERUP_DELAY < 1 + #error "SPINDLE_LASER_POWERUP_DELAY must be greater than 0." + #elif SPINDLE_LASER_POWERDOWN_DELAY < 1 + #error "SPINDLE_LASER_POWERDOWN_DELAY must be greater than 0." + #elif !defined(SPINDLE_LASER_PWM_INVERT) + #error "SPINDLE_LASER_PWM_INVERT missing." + #elif !defined(SPEED_POWER_SLOPE) || !defined(SPEED_POWER_INTERCEPT) || !defined(SPEED_POWER_MIN) || !defined(SPEED_POWER_MAX) + #error "SPINDLE_LASER_PWM equation constant(s) missing." + #elif PIN_EXISTS(CASE_LIGHT) && SPINDLE_LASER_PWM_PIN == CASE_LIGHT_PIN + #error "SPINDLE_LASER_PWM_PIN is used by CASE_LIGHT_PIN." + #elif PIN_EXISTS(E0_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E0_AUTO_FAN_PIN + #error "SPINDLE_LASER_PWM_PIN is used by E0_AUTO_FAN_PIN." + #elif PIN_EXISTS(E1_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E1_AUTO_FAN_PIN + #error "SPINDLE_LASER_PWM_PIN is used by E1_AUTO_FAN_PIN." + #elif PIN_EXISTS(E2_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E2_AUTO_FAN_PIN + #error "SPINDLE_LASER_PWM_PIN is used by E2_AUTO_FAN_PIN." + #elif PIN_EXISTS(E3_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E3_AUTO_FAN_PIN + #error "SPINDLE_LASER_PWM_PIN is used by E3_AUTO_FAN_PIN." + #elif PIN_EXISTS(E4_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E4_AUTO_FAN_PIN + #error "SPINDLE_LASER_PWM_PIN is used by E4_AUTO_FAN_PIN." + #elif PIN_EXISTS(FAN) && SPINDLE_LASER_PWM_PIN == FAN_PIN + #error "SPINDLE_LASER_PWM_PIN is used FAN_PIN." + #elif PIN_EXISTS(FAN1) && SPINDLE_LASER_PWM_PIN == FAN1_PIN + #error "SPINDLE_LASER_PWM_PIN is used FAN1_PIN." + #elif PIN_EXISTS(FAN2) && SPINDLE_LASER_PWM_PIN == FAN2_PIN + #error "SPINDLE_LASER_PWM_PIN is used FAN2_PIN." + #elif PIN_EXISTS(CONTROLLERFAN) && SPINDLE_LASER_PWM_PIN == CONTROLLERFAN_PIN + #error "SPINDLE_LASER_PWM_PIN is used by CONTROLLERFAN_PIN." + #endif + #endif +#endif // SPINDLE_LASER_ENABLE + +#if ENABLED(EMERGENCY_PARSER) + #error "EMERGENCY_PARSER is not yet implemented for STM32. Disable EMERGENCY_PARSER to continue." +#endif diff --git a/Marlin/src/HAL/HAL_STM32/endstop_interrupts.h b/Marlin/src/HAL/HAL_STM32/endstop_interrupts.h new file mode 100644 index 000000000..b7d47d3df --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32/endstop_interrupts.h @@ -0,0 +1,59 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * Copyright (C) 2017 Victor Perez + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#include "../../module/endstops.h" + +// One ISR for all EXT-Interrupts +void endstop_ISR(void) { endstops.update(); } + +void setup_endstop_interrupts(void) { + #if HAS_X_MAX + attachInterrupt(X_MAX_PIN, endstop_ISR, CHANGE); + #endif + #if HAS_X_MIN + attachInterrupt(X_MIN_PIN, endstop_ISR, CHANGE); + #endif + #if HAS_Y_MAX + attachInterrupt(Y_MAX_PIN, endstop_ISR, CHANGE); + #endif + #if HAS_Y_MIN + attachInterrupt(Y_MIN_PIN, endstop_ISR, CHANGE); + #endif + #if HAS_Z_MAX + attachInterrupt(Z_MAX_PIN, endstop_ISR, CHANGE); + #endif + #if HAS_Z_MIN + attachInterrupt(Z_MIN_PIN, endstop_ISR, CHANGE); + #endif + #if HAS_Z2_MAX + attachInterrupt(Z2_MAX_PIN, endstop_ISR, CHANGE); + #endif + #if HAS_Z2_MIN + attachInterrupt(Z2_MIN_PIN, endstop_ISR, CHANGE); + #endif + #if HAS_Z_MIN_PROBE_PIN + attachInterrupt(Z_MIN_PROBE_PIN, endstop_ISR, CHANGE); + #endif +} + diff --git a/Marlin/src/HAL/HAL_STM32/fastio_STM32.h b/Marlin/src/HAL/HAL_STM32/fastio_STM32.h new file mode 100644 index 000000000..e2413e168 --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32/fastio_STM32.h @@ -0,0 +1,53 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * Copyright (C) 2017 Victor Perez + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * Fast I/O interfaces for STM32F7 + * These use GPIO functions instead of Direct Port Manipulation, as on AVR. + */ + +#define _BV(b) (1 << (b)) + +#define USEABLE_HARDWARE_PWM(p) true + +#define READ(IO) digitalRead(IO) +#define WRITE(IO,V) digitalWrite(IO,V) +#define WRITE_VAR(IO,V) WRITE(IO,V) + +#define _GET_MODE(IO) +#define _SET_MODE(IO,M) pinMode(IO, M) +#define _SET_OUTPUT(IO) pinMode(IO, OUTPUT) /*!< Output Push Pull Mode & GPIO_NOPULL */ + +#define OUT_WRITE(IO,V) do{ _SET_OUTPUT(IO); WRITE(IO,V); }while(0) + +#define SET_INPUT(IO) _SET_MODE(IO, INPUT) /*!< Input Floating Mode */ +#define SET_INPUT_PULLUP(IO) _SET_MODE(IO, INPUT_PULLUP) /*!< Input with Pull-up activation */ +#define SET_INPUT_PULLDOWN(IO) _SET_MODE(IO, INPUT_PULLDOWN) /*!< Input with Pull-down activation */ +#define SET_OUTPUT(IO) OUT_WRITE(IO, LOW) + +#define TOGGLE(IO) OUT_WRITE(IO, !READ(IO)) + +#define GET_INPUT(IO) +#define GET_OUTPUT(IO) +#define GET_TIMER(IO) diff --git a/Marlin/src/HAL/HAL_STM32/persistent_store_impl.cpp b/Marlin/src/HAL/HAL_STM32/persistent_store_impl.cpp new file mode 100644 index 000000000..313edf273 --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32/persistent_store_impl.cpp @@ -0,0 +1,103 @@ +/** + * Marlin 3D Printer Firmware + * + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com + * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com + * Copyright (c) 2016 Victor Perez victor_pv@hotmail.com + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#ifdef ARDUINO_ARCH_STM32 + +#include "../../inc/MarlinConfig.h" + +#if ENABLED(EEPROM_SETTINGS) + +#include "../shared/persistent_store_api.h" + +#if DISABLED(EEPROM_EMULATED_WITH_SRAM) + #include + static bool eeprom_data_written = false; +#endif + +bool PersistentStore::access_start() { + #if DISABLED(EEPROM_EMULATED_WITH_SRAM) + eeprom_buffer_fill(); + #endif + return true; +} + +bool PersistentStore::access_finish() { + #if DISABLED(EEPROM_EMULATED_WITH_SRAM) + if (eeprom_data_written) { + eeprom_buffer_flush(); + eeprom_data_written = false; + } + #endif + return true; +} + +bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) { + while (size--) { + uint8_t v = *value; + + // Save to either program flash or Backup SRAM + #if DISABLED(EEPROM_EMULATED_WITH_SRAM) + eeprom_buffered_write_byte(pos, v); + #else + *(__IO uint8_t *)(BKPSRAM_BASE + (uint8_t * const)pos) = v; + #endif + + crc16(crc, &v, 1); + pos++; + value++; + }; + #if DISABLED(EEPROM_EMULATED_WITH_SRAM) + eeprom_data_written = true; + #endif + + return false; +} + +bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing) { + do { + // Read from either program flash or Backup SRAM + const uint8_t c = ( + #if DISABLED(EEPROM_EMULATED_WITH_SRAM) + eeprom_buffered_read_byte(pos) + #else + (*(__IO uint8_t *)(BKPSRAM_BASE + ((unsigned char*)pos))) + #endif + ); + + if (writing) *value = c; + crc16(crc, &c, 1); + pos++; + value++; + } while (--size); + return false; +} + +size_t PersistentStore::capacity() { + #if DISABLED(EEPROM_EMULATED_WITH_SRAM) + return E2END + 1; + #else + return 4096; // 4kB + #endif +} + +#endif // EEPROM_SETTINGS +#endif // ARDUINO_ARCH_STM32 diff --git a/Marlin/src/HAL/HAL_STM32/pinsDebug.h b/Marlin/src/HAL/HAL_STM32/pinsDebug.h new file mode 100644 index 000000000..ac8b00575 --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32/pinsDebug.h @@ -0,0 +1 @@ +#error "Debug pins is not yet supported for STM32!" diff --git a/Marlin/src/HAL/HAL_STM32/spi_pins.h b/Marlin/src/HAL/HAL_STM32/spi_pins.h new file mode 100644 index 000000000..2a97ee9c6 --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32/spi_pins.h @@ -0,0 +1,36 @@ +/** +* Marlin 3D Printer Firmware +* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] +* +* This program is free software: you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation, either version 3 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program. If not, see . +* +*/ +#pragma once + +/** + * Define SPI Pins: SCK, MISO, MOSI, SS + * + */ +#ifndef SCK_PIN + #define SCK_PIN 13 +#endif +#ifndef MISO_PIN + #define MISO_PIN 12 +#endif +#ifndef MOSI_PIN + #define MOSI_PIN 11 +#endif +#ifndef SS_PIN + #define SS_PIN 14 +#endif diff --git a/Marlin/src/HAL/HAL_STM32/watchdog_STM32.cpp b/Marlin/src/HAL/HAL_STM32/watchdog_STM32.cpp new file mode 100644 index 000000000..cc2566b14 --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32/watchdog_STM32.cpp @@ -0,0 +1,37 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifdef ARDUINO_ARCH_STM32 + +#include "../../inc/MarlinConfig.h" + +#if ENABLED(USE_WATCHDOG) + + #include "watchdog_STM32.h" + #include + + void watchdog_init() { IWatchdog.begin(4000000); } // 4 sec timeout + + void watchdog_reset() { IWatchdog.reload(); } + +#endif // USE_WATCHDOG +#endif // ARDUINO_ARCH_STM32 diff --git a/Marlin/src/HAL/HAL_STM32/watchdog_STM32.h b/Marlin/src/HAL/HAL_STM32/watchdog_STM32.h new file mode 100644 index 000000000..ec0c53b4f --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32/watchdog_STM32.h @@ -0,0 +1,27 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#include "../../inc/MarlinConfig.h" + +void watchdog_init(); +void watchdog_reset(); diff --git a/Marlin/src/HAL/platforms.h b/Marlin/src/HAL/platforms.h index 49efe490d..894100f8b 100644 --- a/Marlin/src/HAL/platforms.h +++ b/Marlin/src/HAL/platforms.h @@ -15,10 +15,12 @@ #define HAL_PLATFORM HAL_LPC1768 #elif defined(__STM32F1__) || defined(TARGET_STM32F1) #define HAL_PLATFORM HAL_STM32F1 -#elif defined(STM32F4) || defined(STM32F4xx) +#elif defined(STM32GENERIC) && defined(STM32F4) #define HAL_PLATFORM HAL_STM32F4 -#elif defined(STM32F7) +#elif defined(STM32GENERIC) && defined(STM32F7) #define HAL_PLATFORM HAL_STM32F7 +#elif defined(ARDUINO_ARCH_STM32) + #define HAL_PLATFORM HAL_STM32 #elif defined(ARDUINO_ARCH_ESP32) #define HAL_PLATFORM HAL_ESP32 #else diff --git a/Marlin/src/HAL/shared/backtrace/unwmemaccess.cpp b/Marlin/src/HAL/shared/backtrace/unwmemaccess.cpp index 784987172..8bac1ec50 100644 --- a/Marlin/src/HAL/shared/backtrace/unwmemaccess.cpp +++ b/Marlin/src/HAL/shared/backtrace/unwmemaccess.cpp @@ -15,6 +15,7 @@ #if defined(__arm__) || defined(__thumb__) #include "unwmemaccess.h" +#include "../../../inc/MarlinConfig.h" /* Validate address */ @@ -73,7 +74,7 @@ #define END_FLASH_ADDR 0x08080000 #endif -#ifdef STM32F7 +#if MB(THE_BORG) // For STM32F765 in BORG // SRAM (0x20000000 - 0x20080000) (512kb) // FLASH (0x08000000 - 0x08100000) (1024kb) @@ -84,6 +85,17 @@ #define END_FLASH_ADDR 0x08100000 #endif +#if MB(REMRAM_V1) +// For STM32F765VI in RemRam v1 +// SRAM (0x20000000 - 0x20080000) (512kb) +// FLASH (0x08000000 - 0x08200000) (2048kb) +// +#define START_SRAM_ADDR 0x20000000 +#define END_SRAM_ADDR 0x20080000 +#define START_FLASH_ADDR 0x08000000 +#define END_FLASH_ADDR 0x08200000 +#endif + #ifdef __MK20DX256__ // For MK20DX256 in TEENSY 3.1 or TEENSY 3.2 // SRAM (0x1FFF8000 - 0x20008000) (64kb) diff --git a/Marlin/src/HAL/shared/servo.cpp b/Marlin/src/HAL/shared/servo.cpp index 82b7b9ade..7d15d76b1 100644 --- a/Marlin/src/HAL/shared/servo.cpp +++ b/Marlin/src/HAL/shared/servo.cpp @@ -53,7 +53,7 @@ #include "../../inc/MarlinConfig.h" -#if HAS_SERVOS && !(IS_32BIT_TEENSY || defined(TARGET_LPC1768) || defined(STM32F1) || defined(STM32F1xx) || defined(STM32F4) || defined(STM32F4xx)) +#if HAS_SERVOS && !(IS_32BIT_TEENSY || defined(TARGET_LPC1768) || defined(STM32F1) || defined(STM32F1xx) || defined(STM32F4) || defined(STM32F4xx) || defined(STM32F7xx)) //#include #include "servo.h" diff --git a/Marlin/src/HAL/shared/servo.h b/Marlin/src/HAL/shared/servo.h index b838a9905..270923b54 100644 --- a/Marlin/src/HAL/shared/servo.h +++ b/Marlin/src/HAL/shared/servo.h @@ -74,10 +74,12 @@ #include "../HAL_TEENSY35_36/HAL_Servo_Teensy.h" #elif defined(TARGET_LPC1768) #include "../HAL_LPC1768/LPC1768_Servo.h" -#elif defined(STM32F1) || defined(STM32F1xx) +#elif defined(__STM32F1__) || defined(TARGET_STM32F1) #include "../HAL_STM32F1/HAL_Servo_STM32F1.h" -#elif defined(STM32F4) || defined(STM32F4xx) +#elif defined(STM32GENERIC) && defined(STM32F4) #include "../HAL_STM32F4/HAL_Servo_STM32F4.h" +#elif defined(ARDUINO_ARCH_STM32) + #include "../HAL_STM32/HAL_Servo_STM32.h" #else #include diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index b67d42a3f..05972183e 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -236,6 +236,7 @@ // #define BOARD_THE_BORG 1860 // THE-BORG (Power outputs: Hotend0, Hotend1, Bed, Fan) +#define BOARD_REMRAM_V1 1862 // RemRam v1 // // Espressif ESP32 WiFi diff --git a/Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.cpp b/Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.cpp index 9d3d68ef4..a6d873006 100644 --- a/Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.cpp +++ b/Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.cpp @@ -72,6 +72,10 @@ #define CPU_ST7920_DELAY_1 DELAY_NS(0) #define CPU_ST7920_DELAY_2 DELAY_NS(0) #define CPU_ST7920_DELAY_3 DELAY_NS(189) +#elif MB(REMRAM_V1) + #define CPU_ST7920_DELAY_1 DELAY_NS(0) + #define CPU_ST7920_DELAY_2 DELAY_NS(0) + #define CPU_ST7920_DELAY_3 DELAY_NS(0) #elif F_CPU == 16000000 #define CPU_ST7920_DELAY_1 DELAY_NS(0) #define CPU_ST7920_DELAY_2 DELAY_NS(0) diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index 6a45a7dcb..66f031817 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -404,6 +404,8 @@ #elif MB(THE_BORG) #include "pins_THE_BORG.h" // STM32F7 env:STM32F7 +#elif MB(REMRAM_V1) + #include "pins_REMRAM_V1.h" // STM32F7 env:STM32F7xx // // Espressif ESP32 diff --git a/Marlin/src/pins/pins_REMRAM_V1.h b/Marlin/src/pins/pins_REMRAM_V1.h new file mode 100644 index 000000000..193f56713 --- /dev/null +++ b/Marlin/src/pins/pins_REMRAM_V1.h @@ -0,0 +1,126 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef STM32F7xx + #error "Oops! Make sure you have an STM32F7 board selected from the 'Tools -> Boards' menu." +#endif + +#define DEFAULT_MACHINE_NAME "RemRam" +#define BOARD_NAME "RemRam v1" + +#define EEPROM_EMULATED_WITH_SRAM // Emulate the EEPROM using Backup SRAM + +#if E_STEPPERS > 1 || HOTENDS > 1 + #error "RemRam supports only one hotend / E-stepper." +#endif + +// +// Limit Switches +// +#if DISABLED(SENSORLESS_HOMING) + #define X_MIN_PIN 58 + #define X_MAX_PIN 59 + #define Y_MIN_PIN 60 + #define Y_MAX_PIN 61 + #define Z_MIN_PIN 62 + #define Z_MAX_PIN 63 +#else + #define X_STOP_PIN 36 + #define Y_STOP_PIN 39 + #define Z_MIN_PIN 62 + #define Z_MAX_PIN 42 +#endif + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 26 // EXT_D1 +#endif + +// +// Steppers +// +#define X_STEP_PIN 22 +#define X_DIR_PIN 35 +#define X_ENABLE_PIN 34 +#define X_CS_PIN 14 + +#define Y_STEP_PIN 23 +#define Y_DIR_PIN 38 +#define Y_ENABLE_PIN 37 +#define Y_CS_PIN 15 + +#define Z_STEP_PIN 24 +#define Z_DIR_PIN 41 +#define Z_ENABLE_PIN 40 +#define Z_CS_PIN 16 + +#define E0_STEP_PIN 25 +#define E0_DIR_PIN 44 +#define E0_ENABLE_PIN 43 +#define E0_CS_PIN 10 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 65 // THERM_2 +#define TEMP_1_PIN 66 // THERM_3 +#define TEMP_BED_PIN 64 // THERM_1 + +// +// Heaters / Fans +// +#define HEATER_0_PIN 33 +#define HEATER_BED_PIN 31 + +#ifndef FAN_PIN + #define FAN_PIN 30 // "FAN1" +#endif +#define FAN1_PIN 32 // "FAN2" + +#define ORIG_E0_AUTO_FAN_PIN 32 // Use this by NOT overriding E0_AUTO_FAN_PIN + +// +// Servos +// +#define SERVO0_PIN 26 // PWM_EXT1 +#define SERVO1_PIN 27 // PWM_EXT2 + +#define SDSS 9 +#define LED_PIN 21 // STATUS_LED +#define KILL_PIN 57 + +// +// LCD / Controller +// +#define SD_DETECT_PIN 56 // SD_CARD_DET +#define BEEPER_PIN 46 // LCD_BEEPER +#define LCD_PINS_RS 49 // LCD_RS +#define LCD_PINS_ENABLE 48 // LCD_EN +#define LCD_PINS_D4 50 // LCD_D4 +#define LCD_PINS_D5 51 // LCD_D5 +#define LCD_PINS_D6 52 // LCD_D6 +#define LCD_PINS_D7 53 // LCD_D7 +#define BTN_EN1 54 // BTN_EN1 +#define BTN_EN2 55 // BTN_EN2 +#define BTN_ENC 47 // BTN_ENC