Improved the LCD and SD comments blocks in Configuration.h
This commit is contained in:
parent
0fc84b75f4
commit
36a49eab1c
@ -714,7 +714,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
|
|
||||||
// @section extras
|
// @section extras
|
||||||
|
|
||||||
|
//
|
||||||
// EEPROM
|
// EEPROM
|
||||||
|
//
|
||||||
// The microcontroller can store settings in the EEPROM, e.g. max velocity...
|
// The microcontroller can store settings in the EEPROM, e.g. max velocity...
|
||||||
// M500 - stores parameters in EEPROM
|
// M500 - stores parameters in EEPROM
|
||||||
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
|
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
|
||||||
@ -754,113 +756,250 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
#define ABS_PREHEAT_HPB_TEMP 110
|
#define ABS_PREHEAT_HPB_TEMP 110
|
||||||
#define ABS_PREHEAT_FAN_SPEED 0 // Insert Value between 0 and 255
|
#define ABS_PREHEAT_FAN_SPEED 0 // Insert Value between 0 and 255
|
||||||
|
|
||||||
//==============================LCD and SD support=============================
|
//=============================================================================
|
||||||
|
//============================= LCD and SD support ============================
|
||||||
|
//=============================================================================
|
||||||
// @section lcd
|
// @section lcd
|
||||||
|
|
||||||
// Define your display language below. Replace (en) with your language code and uncomment.
|
//
|
||||||
// en, pl, fr, de, es, ru, bg, it, pt, pt_utf8, pt-br, pt-br_utf8, fi, an, nl, ca, eu, kana, kana_utf8, cn, cz, test
|
// MARLIN LANGUAGE
|
||||||
// See also language.h
|
//
|
||||||
|
// Here you may choose the language used by Marlin on the LCD menus, the following
|
||||||
|
// list of languages are available:
|
||||||
|
// en, pl, fr, de, es, ru, bg, it, pt, pt_utf8, pt-br, pt-br_utf8,
|
||||||
|
// fi, an, nl, ca, eu, kana, kana_utf8, cn, cz, test
|
||||||
|
//
|
||||||
#define LANGUAGE_INCLUDE GENERATE_LANGUAGE_INCLUDE(en)
|
#define LANGUAGE_INCLUDE GENERATE_LANGUAGE_INCLUDE(en)
|
||||||
|
|
||||||
// Choose ONE of these 3 charsets. This has to match your hardware. Ignored for full graphic display.
|
//
|
||||||
// To find out what type you have - compile with (test) - upload - click to get the menu. You'll see two typical lines from the upper half of the charset.
|
// LCD CHARSET
|
||||||
|
//
|
||||||
|
// Choose ONE of the following charset list, keep in mind that this selection is
|
||||||
|
// dependent on your physical hardware thus it has to match the type of Character
|
||||||
|
// based LCD you have.
|
||||||
|
//
|
||||||
|
// Note: This options is ignored for a full graphic display.
|
||||||
|
//
|
||||||
|
// To find out what type you have:
|
||||||
|
// - Compile and upload with language set to 'test'
|
||||||
|
// - Click to get the menu
|
||||||
|
//
|
||||||
|
// You'll see two typical lines from the upper half of the charset.
|
||||||
|
//
|
||||||
// See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
// See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
||||||
#define DISPLAY_CHARSET_HD44780_JAPAN // this is the most common hardware
|
//
|
||||||
//#define DISPLAY_CHARSET_HD44780_WESTERN
|
#define DISPLAY_CHARSET_HD44780_JAPAN // this is the most common hardware
|
||||||
//#define DISPLAY_CHARSET_HD44780_CYRILLIC
|
//#define DISPLAY_CHARSET_HD44780_WESTERN
|
||||||
|
//#define DISPLAY_CHARSET_HD44780_CYRILLIC
|
||||||
|
|
||||||
//#define ULTRA_LCD //general LCD support, also 16x2
|
//
|
||||||
//#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
|
// LCD TYPE
|
||||||
//#define SDSUPPORT // Enable SD Card Support in Hardware Console
|
//
|
||||||
// Changed behaviour! If you need SDSUPPORT uncomment it!
|
// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2,
|
||||||
//#define SPI_SPEED SPI_HALF_SPEED // (also SPI_QUARTER_SPEED, SPI_EIGHTH_SPEED) Use slower SD transfer mode (not normally needed - uncomment if you're getting volume init error)
|
// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels
|
||||||
//#define SD_CHECK_AND_RETRY // Use CRC checks and retries on the SD communication
|
// (ST7565R family).
|
||||||
//#define ENCODER_PULSES_PER_STEP 1 // Increase if you have a high resolution encoder
|
//
|
||||||
//#define ENCODER_STEPS_PER_MENU_ITEM 5 // Set according to ENCODER_PULSES_PER_STEP or your liking
|
// IMPORTANT NOTE: You have to install Arduino's U8glib library for the Full
|
||||||
//#define REVERSE_MENU_DIRECTION // When enabled CLOCKWISE moves UP in the LCD menu
|
// Graphics Display to work ! - https://github.com/olikraus/U8glib_Arduino
|
||||||
//#define ULTIMAKERCONTROLLER //as available from the Ultimaker online store.
|
//
|
||||||
//#define ULTIPANEL //the UltiPanel as on Thingiverse
|
//#define ULTRA_LCD // Character based
|
||||||
//#define SPEAKER // The sound device is a speaker - not a buzzer. A buzzer resonates with a fixed frequency.
|
//#define DOGLCD // Full graphics display
|
||||||
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click
|
|
||||||
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
|
//
|
||||||
// 0 to disable buzzer feedback. Test with M300 S<frequency Hz> P<duration ms>
|
// SD CARD
|
||||||
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
|
//
|
||||||
// http://reprap.org/wiki/PanelOne
|
// SD card support is now disabled by default, if you have [and want] SD support
|
||||||
|
// then you must uncomment the following directive.
|
||||||
|
//
|
||||||
|
//#define SDSUPPORT
|
||||||
|
|
||||||
|
//
|
||||||
|
// SD CARD: SPI SPEED
|
||||||
|
//
|
||||||
|
// You may uncomment *one* of the following directives to use slower SPI transfer
|
||||||
|
// speeds, this is usually required if you're getting volume init errors.
|
||||||
|
//
|
||||||
|
//#define SPI_SPEED SPI_HALF_SPEED
|
||||||
|
//#define SPI_SPEED SPI_QUARTER_SPEED
|
||||||
|
//#define SPI_SPEED SPI_EIGHTH_SPEED
|
||||||
|
|
||||||
|
//
|
||||||
|
// SD CARD: ENABLE CRC
|
||||||
|
//
|
||||||
|
// Use CRC checks and retries on the SD communication.
|
||||||
|
//
|
||||||
|
//#define SD_CHECK_AND_RETRY
|
||||||
|
|
||||||
|
//
|
||||||
|
// ENCODER SETTINGS
|
||||||
|
//
|
||||||
|
// This option defines how many pulses a encoder should produce for a menu
|
||||||
|
// step to be produced, you should increase this value for highres encoders.
|
||||||
|
//
|
||||||
|
//#define ENCODER_PULSES_PER_STEP 1
|
||||||
|
//
|
||||||
|
//
|
||||||
|
// This option defines how many steps are required for Marlin to move between
|
||||||
|
// next/prev menu items.
|
||||||
|
//
|
||||||
|
//#define ENCODER_STEPS_PER_MENU_ITEM 5
|
||||||
|
//
|
||||||
|
//
|
||||||
|
// This option allows you to reverse the direction you have to turn the encoder
|
||||||
|
// to navigate up/down on the menus, by default CLOCKWISE rotation moves DOWN in
|
||||||
|
// the LCD menu, when active CLOCKWISE rotation will move UP in the LCD menu.
|
||||||
|
//
|
||||||
|
//#define REVERSE_MENU_DIRECTION
|
||||||
|
//
|
||||||
|
//
|
||||||
|
// If you have a speaker activate this directive to enable it.
|
||||||
|
// By default Marlin assumes your setup is buzzer based and no action is required.
|
||||||
|
//
|
||||||
|
//#define SPEAKER
|
||||||
|
//
|
||||||
|
// The duration and frequency the buzzer plays the UI feedback sound.
|
||||||
|
// You may define these directives with 0 (zero) if you want to disable all sound
|
||||||
|
// feedback from Marlin.
|
||||||
|
//
|
||||||
|
// Note: You may test the buzzing sound with the G-Code:
|
||||||
|
// M300 S<frequency Hz> P<duration ms>
|
||||||
|
//
|
||||||
|
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
|
||||||
|
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
|
||||||
|
|
||||||
|
//
|
||||||
|
// CONTROLLER TYPE: Standard
|
||||||
|
//
|
||||||
|
// Marlin supports a impressive variety of controllers, uncomment the directive
|
||||||
|
// which defines physical controller you're using.
|
||||||
|
//
|
||||||
|
//
|
||||||
|
// Activate this directive if you have an ULTIMAKER Controller.
|
||||||
|
//
|
||||||
|
//#define ULTIMAKERCONTROLLER
|
||||||
|
//
|
||||||
|
//
|
||||||
|
// Activate this directive if you have a ULTIPANEL as seen on Thingiverse.
|
||||||
|
//
|
||||||
|
//#define ULTIPANEL
|
||||||
|
//
|
||||||
|
//
|
||||||
|
// Activate this directive if you have a PanelOne from T3P3
|
||||||
|
// (via RAMPS 1.4 AUX2/AUX3) - http://reprap.org/wiki/PanelOne
|
||||||
|
//
|
||||||
//#define PANEL_ONE
|
//#define PANEL_ONE
|
||||||
|
//
|
||||||
// The MaKr3d Makr-Panel with graphic controller and SD support
|
//
|
||||||
// http://reprap.org/wiki/MaKr3d_MaKrPanel
|
// Activate this directive if you have a MaKr3d Makr-Panel with graphic
|
||||||
|
// controller and SD suppord - http://reprap.org/wiki/MaKr3d_MaKrPanel
|
||||||
|
//
|
||||||
//#define MAKRPANEL
|
//#define MAKRPANEL
|
||||||
|
//
|
||||||
// The Panucatt Devices Viki 2.0 and mini Viki with Graphic LCD
|
//
|
||||||
// http://panucatt.com
|
// Activate one of these directives if you have a Panucatt Devices Viki 2.0 or
|
||||||
// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: https://github.com/olikraus/U8glib_Arduino
|
// mini Viki with Graphic LCD - http://panucatt.com
|
||||||
|
//
|
||||||
//#define VIKI2
|
//#define VIKI2
|
||||||
//#define miniVIKI
|
//#define miniVIKI
|
||||||
|
|
||||||
// This is a new controller currently under development. https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
|
// This is a new controller currently under development. https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
|
||||||
//
|
//
|
||||||
// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: https://github.com/olikraus/U8glib_Arduino
|
//
|
||||||
|
// Activate this directive if you have an Adafruit ST7565 Full Graphic Controller.
|
||||||
|
// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
|
||||||
|
//
|
||||||
//#define ELB_FULL_GRAPHIC_CONTROLLER
|
//#define ELB_FULL_GRAPHIC_CONTROLLER
|
||||||
//#define SD_DETECT_INVERTED
|
//
|
||||||
|
//
|
||||||
// The RepRapDiscount Smart Controller (white PCB)
|
// Activate this directive if you have a RepRapDiscount Smart Controller.
|
||||||
// http://reprap.org/wiki/RepRapDiscount_Smart_Controller
|
// http://reprap.org/wiki/RepRapDiscount_Smart_Controller
|
||||||
|
//
|
||||||
|
// Note: Usually sold in a white PCB.
|
||||||
|
//
|
||||||
//#define REPRAP_DISCOUNT_SMART_CONTROLLER
|
//#define REPRAP_DISCOUNT_SMART_CONTROLLER
|
||||||
|
//
|
||||||
// The GADGETS3D G3D LCD/SD Controller (blue PCB)
|
//
|
||||||
|
// Activate this directive if you have a BQ LCD Smart Controller shipped by
|
||||||
|
// default with the BQ Hephestos 2 and Witbox 2.
|
||||||
|
//
|
||||||
|
//#define BQ_LCD_SMART_CONTROLLER
|
||||||
|
//
|
||||||
|
//
|
||||||
|
// Activate this directive if you have a GADGETS3D G3D LCD/SD Controller
|
||||||
// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel
|
// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel
|
||||||
|
//
|
||||||
|
// Note: Usually sold in a blue PCB.
|
||||||
|
//
|
||||||
//#define G3D_PANEL
|
//#define G3D_PANEL
|
||||||
|
//
|
||||||
// The RepRapDiscount FULL GRAPHIC Smart Controller (quadratic white PCB)
|
//
|
||||||
|
// Activate this directive if you have a RepRapDiscount FULL GRAPHIC Smart Controller
|
||||||
// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
|
// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
|
||||||
//
|
//
|
||||||
// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: https://github.com/olikraus/U8glib_Arduino
|
// #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
|
||||||
//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
|
//
|
||||||
|
//
|
||||||
// The RepRapWorld REPRAPWORLD_KEYPAD v1.1
|
// Activate this directive if you have a MakerLab Mini Panel with graphic
|
||||||
// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626
|
// controller and SD support - http://reprap.org/wiki/Mini_panel
|
||||||
//#define REPRAPWORLD_KEYPAD
|
//#define MINIPANEL
|
||||||
//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // how much should be moved when a key is pressed, eg 10.0 means 10mm per click
|
//
|
||||||
|
//
|
||||||
// The Elefu RA Board Control Panel
|
// Activate this directive if you have a RepRapWorld REPRAPWORLD_KEYPAD v1.1
|
||||||
// http://www.elefu.com/index.php?route=product/product&product_id=53
|
// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626
|
||||||
// REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARDUINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C
|
//
|
||||||
//#define RA_CONTROL_PANEL
|
// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key
|
||||||
|
// is pressed, a value of 10.0 means 10mm per click.
|
||||||
// The MakerLab Mini Panel with graphic controller and SD support
|
//
|
||||||
// http://reprap.org/wiki/Mini_panel
|
//#define REPRAPWORLD_KEYPAD
|
||||||
//#define MINIPANEL
|
//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0
|
||||||
|
|
||||||
/**
|
//
|
||||||
* I2C Panels
|
// CONTROLLER TYPE: I2C
|
||||||
*/
|
//
|
||||||
|
// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
|
||||||
//#define LCD_I2C_SAINSMART_YWROBOT
|
// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C
|
||||||
|
//
|
||||||
//#define LCM1602 // LCM1602 Adapter for 16x2 LCD
|
//
|
||||||
|
// Activate this directive if you have an Elefu RA Board Control Panel
|
||||||
// PANELOLU2 LCD with status LEDs, separate encoder and click inputs
|
// http://www.elefu.com/index.php?route=product/product&product_id=53
|
||||||
|
//
|
||||||
|
//#define RA_CONTROL_PANEL
|
||||||
|
//#define LCD_I2C_SAINSMART_YWROBOT
|
||||||
|
//
|
||||||
|
//
|
||||||
|
// Activate this directive if you have a LCM160 LCD adapter.
|
||||||
|
//
|
||||||
|
//#define LCM1602
|
||||||
|
//
|
||||||
|
//
|
||||||
|
// Activate this directive if you have a PANELOLU2 LCD with status LEDs,
|
||||||
|
// separate encoder and click inputs.
|
||||||
|
//
|
||||||
|
// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later.
|
||||||
|
// For more info: https://github.com/lincomatic/LiquidTWI2
|
||||||
|
//
|
||||||
|
// Note: The PANELOLU2 encoder click input can either be directly connected to
|
||||||
|
// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1).
|
||||||
//
|
//
|
||||||
// This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 )
|
|
||||||
// Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory.
|
|
||||||
// (v1.2.3 no longer requires you to define PANELOLU in the LiquidTWI2.h library header file)
|
|
||||||
// Note: The PANELOLU2 encoder click input can either be directly connected to a pin
|
|
||||||
// (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1).
|
|
||||||
//#define LCD_I2C_PANELOLU2
|
//#define LCD_I2C_PANELOLU2
|
||||||
|
//
|
||||||
// Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs
|
//
|
||||||
|
// Activate this directive if you have a Panucatt VIKI LCD with status LEDs,
|
||||||
|
// integrated click & L/R/U/D buttons, separate encoder inputs.
|
||||||
|
//
|
||||||
//#define LCD_I2C_VIKI
|
//#define LCD_I2C_VIKI
|
||||||
|
//
|
||||||
// SSD1306 OLED generic display support
|
//
|
||||||
// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: https://github.com/olikraus/U8glib_Arduino
|
// Activate this directive if you have a SSD1306 OLED full graphics generic display
|
||||||
|
//
|
||||||
//#define U8GLIB_SSD1306
|
//#define U8GLIB_SSD1306
|
||||||
|
|
||||||
// Shift register panels
|
//
|
||||||
// ---------------------
|
// CONTROLLER TYPE: Shift register panels
|
||||||
// 2 wire Non-latching LCD SR from:
|
//
|
||||||
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
|
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
|
||||||
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
|
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
|
||||||
|
//
|
||||||
//#define SAV_3DLCD
|
//#define SAV_3DLCD
|
||||||
|
|
||||||
// @section extras
|
// @section extras
|
||||||
|
Loading…
Reference in New Issue
Block a user