From 344ebc3bd2d50921ece2a33ca4c4bce253a85d92 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Fri, 12 Jan 2018 01:07:25 -0600 Subject: [PATCH 1/2] Create and use pins_MELZI_MALYAN.h for Malyan M150 --- .../examples/Malyan/M150/Configuration.h | 2 +- Marlin/src/core/boards.h | 1 + Marlin/src/pins/pins.h | 2 + Marlin/src/pins/pins_MELZI_MALYAN.h | 50 +++++++++++++++++++ 4 files changed, 54 insertions(+), 1 deletion(-) create mode 100644 Marlin/src/pins/pins_MELZI_MALYAN.h diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration.h b/Marlin/src/config/examples/Malyan/M150/Configuration.h index 420b3bdf1..d2890c05f 100644 --- a/Marlin/src/config/examples/Malyan/M150/Configuration.h +++ b/Marlin/src/config/examples/Malyan/M150/Configuration.h @@ -133,7 +133,7 @@ // The following define selects which electronics board you have. // Please choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MELZI + #define MOTHERBOARD BOARD_MELZI_MALYAN #endif // Optional custom name for your RepStrap or other custom machine diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index 075ac1e9e..58395dfe7 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -114,6 +114,7 @@ #define BOARD_MELZI 63 // Melzi #define BOARD_MELZI_MAKR3D 66 // Melzi with ATmega1284 (MaKr3d version) #define BOARD_MELZI_CREALITY 89 // Melzi Creality3D board (for CR-10 etc) +#define BOARD_MELZI_MALYAN 92 // Melzi Malyan M150 board #define BOARD_STB_11 64 // STB V1.1 #define BOARD_AZTEEG_X1 65 // Azteeg X1 diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index 8bd0d8d33..420f8df74 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -193,6 +193,8 @@ #include "pins_MELZI_MAKR3D.h" // ATmega644P, ATmega1284P #elif MB(MELZI_CREALITY) #include "pins_MELZI_CREALITY.h" // ATmega644P, ATmega1284P +#elif MB(MELZI_MALYAN) + #include "pins_MELZI_MALYAN.h" // ATmega644P, ATmega1284P #elif MB(STB_11) #include "pins_STB_11.h" // ATmega644P, ATmega1284P #elif MB(AZTEEG_X1) diff --git a/Marlin/src/pins/pins_MELZI_MALYAN.h b/Marlin/src/pins/pins_MELZI_MALYAN.h new file mode 100644 index 000000000..91a182cda --- /dev/null +++ b/Marlin/src/pins/pins_MELZI_MALYAN.h @@ -0,0 +1,50 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Melzi (Malyan M150) pin assignments + */ + +#define BOARD_NAME "Melzi (Malyan)" +#define IS_MELZI + +#include "pins_SANGUINOLOLU_12.h" + +#undef LCD_SDSS +#undef LCD_PINS_RS +#undef LCD_PINS_ENABLE +#undef LCD_PINS_D4 +#undef BTN_EN1 +#undef BTN_EN2 +#undef BTN_ENC + +#define LCD_PINS_RS 17 // st9720 CS +#define LCD_PINS_ENABLE 16 // st9720 DAT +#define LCD_PINS_D4 11 // st9720 CLK +#define BTN_EN1 30 +#define BTN_EN2 29 +#define BTN_ENC 28 + +// Alter timing for graphical display +#define ST7920_DELAY_1 DELAY_2_NOP +#define ST7920_DELAY_2 DELAY_2_NOP +#define ST7920_DELAY_3 DELAY_2_NOP From 0cd397a3f875f1ba45ab960cec555bff31a6df22 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Fri, 12 Jan 2018 01:07:39 -0600 Subject: [PATCH 2/2] Add instructions for Malyan M150 --- .../src/config/examples/Malyan/M150/README.md | 58 ++++++++++++++++++- 1 file changed, 55 insertions(+), 3 deletions(-) diff --git a/Marlin/src/config/examples/Malyan/M150/README.md b/Marlin/src/config/examples/Malyan/M150/README.md index 1d3117769..44c308de2 100644 --- a/Marlin/src/config/examples/Malyan/M150/README.md +++ b/Marlin/src/config/examples/Malyan/M150/README.md @@ -1,3 +1,55 @@ -# Configuration for Malyan M150 hobbyking printer -# config without automatic bed level sensor -# or in other words, "as stock" +# Configuration for Malyan M150 HobbyKing printer + +Config without automatic bed level sensor, or in other words, "as stock" + +## To install: + +1. Install [Arduino](https://www.arduino.cc/en/Main/Software) + +1. Install U8glib + * `Sketch` -> `Include Library` -> `Manage Libraries...` + * Search for and install `U8glib` by oliver + +1. Install Sanguino + * `File` -> `Preferences` + * Add + `https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json` + to `Additional Boards Manager URLs` + +1. Modify Sanguino `boards.txt` + * Close Arduino + * Locate Arduino15 folder + - `C:\Users\\AppData\Local\Arduino15` for Windows + - `~/.arduino15` for Linux + + * Locate `boards.txt` in `packages/Sanguino/hardware/avr/1.0.2` + (version number may change) + * Add the following to the end of `boards.txt` + (note that it is the same as sanguino.menu.cpu.atmega1284p but with + a different name and upload speed) + + ## Malyan M150 W/ ATmega1284P 16MHz + sanguino.menu.cpu.malyan_m150=Malyan M150 + sanguino.menu.cpu.malyan_m150.upload.maximum_size=130048 + sanguino.menu.cpu.malyan_m150.upload.maximum_data_size=16384 + sanguino.menu.cpu.malyan_m150.upload.speed=57600 + sanguino.menu.cpu.malyan_m150.bootloader.file=optiboot/optiboot_atmega1284p.hex + sanguino.menu.cpu.malyan_m150.build.mcu=atmega1284p + sanguino.menu.cpu.malyan_m150.build.f_cpu=16000000L + +1. Configure Marlin + * Copy `_Bootscreen.h`, `Configuration.h`, and `Configuration_adv.h` + from `Marlin/config/examples/Malyan/M150` to `Marlin` + (overwrite files) + * Read `Configuration.h` and make any necessary changes + +1. Flash Marlin + * Turn on printer while pressing scroll wheel button + * Plug printer in to computer with USB cable + * Open `Marlin/Marlin.ino` with Arduino + * Configure Arduino + - `Tools` -> `Board` -> `Sanguino` + - `Tools` -> `Processor` -> `Malyan M150` + - `Tools` -> `Port` -> Select your port + + * `Sketch` -> `Upload` or click arrow in top right corner