Use deploy/stow with FIX_MOUNTED_PROBE too
This commit is contained in:
Scott Lahteine
parent
524f6d9bd6
commit
3b457c2dd3
@ -1684,6 +1684,197 @@ static void setup_for_endstop_move() {
|
||||
|
||||
#endif
|
||||
|
||||
#if HAS_BED_PROBE
|
||||
|
||||
static void deploy_z_probe() {
|
||||
|
||||
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
||||
if (DEBUGGING(LEVELING)) DEBUG_POS("deploy_z_probe", current_position);
|
||||
#endif
|
||||
|
||||
if (endstops.z_probe_enabled) return;
|
||||
|
||||
#if HAS_Z_SERVO_ENDSTOP
|
||||
|
||||
// Make room for Z Servo
|
||||
raise_z_for_servo(Z_RAISE_BEFORE_PROBING);
|
||||
|
||||
// Engage Z Servo endstop if enabled
|
||||
DEPLOY_Z_SERVO();
|
||||
|
||||
#elif ENABLED(Z_PROBE_ALLEN_KEY)
|
||||
float old_feedrate = feedrate;
|
||||
|
||||
feedrate = Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE;
|
||||
|
||||
// If endstop is already false, the Z probe is deployed
|
||||
#if ENABLED(Z_MIN_PROBE_ENDSTOP)
|
||||
bool z_probe_endstop = (READ(Z_MIN_PROBE_PIN) != Z_MIN_PROBE_ENDSTOP_INVERTING);
|
||||
if (z_probe_endstop)
|
||||
#else
|
||||
bool z_min_endstop = (READ(Z_MIN_PIN) != Z_MIN_ENDSTOP_INVERTING);
|
||||
if (z_min_endstop)
|
||||
#endif
|
||||
{
|
||||
// Move to the start position to initiate deployment
|
||||
destination[X_AXIS] = Z_PROBE_ALLEN_KEY_DEPLOY_1_X;
|
||||
destination[Y_AXIS] = Z_PROBE_ALLEN_KEY_DEPLOY_1_Y;
|
||||
destination[Z_AXIS] = Z_PROBE_ALLEN_KEY_DEPLOY_1_Z;
|
||||
prepare_move_to_destination_raw(); // this will also set_current_to_destination
|
||||
|
||||
// Move to engage deployment
|
||||
if (Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE != Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE)
|
||||
feedrate = Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE;
|
||||
if (Z_PROBE_ALLEN_KEY_DEPLOY_2_X != Z_PROBE_ALLEN_KEY_DEPLOY_1_X)
|
||||
destination[X_AXIS] = Z_PROBE_ALLEN_KEY_DEPLOY_2_X;
|
||||
if (Z_PROBE_ALLEN_KEY_DEPLOY_2_Y != Z_PROBE_ALLEN_KEY_DEPLOY_1_Y)
|
||||
destination[Y_AXIS] = Z_PROBE_ALLEN_KEY_DEPLOY_2_Y;
|
||||
if (Z_PROBE_ALLEN_KEY_DEPLOY_2_Z != Z_PROBE_ALLEN_KEY_DEPLOY_1_Z)
|
||||
destination[Z_AXIS] = Z_PROBE_ALLEN_KEY_DEPLOY_2_Z;
|
||||
prepare_move_to_destination_raw();
|
||||
|
||||
#ifdef Z_PROBE_ALLEN_KEY_DEPLOY_3_X
|
||||
if (Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE != Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE)
|
||||
feedrate = Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE;
|
||||
|
||||
// Move to trigger deployment
|
||||
if (Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE != Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE)
|
||||
feedrate = Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE;
|
||||
if (Z_PROBE_ALLEN_KEY_DEPLOY_3_X != Z_PROBE_ALLEN_KEY_DEPLOY_2_X)
|
||||
destination[X_AXIS] = Z_PROBE_ALLEN_KEY_DEPLOY_3_X;
|
||||
if (Z_PROBE_ALLEN_KEY_DEPLOY_3_Y != Z_PROBE_ALLEN_KEY_DEPLOY_2_Y)
|
||||
destination[Y_AXIS] = Z_PROBE_ALLEN_KEY_DEPLOY_3_Y;
|
||||
if (Z_PROBE_ALLEN_KEY_DEPLOY_3_Z != Z_PROBE_ALLEN_KEY_DEPLOY_2_Z)
|
||||
destination[Z_AXIS] = Z_PROBE_ALLEN_KEY_DEPLOY_3_Z;
|
||||
|
||||
prepare_move_to_destination_raw();
|
||||
#endif
|
||||
}
|
||||
|
||||
// Partially Home X,Y for safety
|
||||
destination[X_AXIS] *= 0.75;
|
||||
destination[Y_AXIS] *= 0.75;
|
||||
prepare_move_to_destination_raw(); // this will also set_current_to_destination
|
||||
|
||||
feedrate = old_feedrate;
|
||||
|
||||
stepper.synchronize();
|
||||
|
||||
#if ENABLED(Z_MIN_PROBE_ENDSTOP)
|
||||
z_probe_endstop = (READ(Z_MIN_PROBE_PIN) != Z_MIN_PROBE_ENDSTOP_INVERTING);
|
||||
if (z_probe_endstop)
|
||||
#else
|
||||
z_min_endstop = (READ(Z_MIN_PIN) != Z_MIN_ENDSTOP_INVERTING);
|
||||
if (z_min_endstop)
|
||||
#endif
|
||||
{
|
||||
if (IsRunning()) {
|
||||
SERIAL_ERROR_START;
|
||||
SERIAL_ERRORLNPGM("Z-Probe failed to engage!");
|
||||
LCD_ALERTMESSAGEPGM("Err: ZPROBE");
|
||||
}
|
||||
stop();
|
||||
}
|
||||
|
||||
#elif ENABLED(FIX_MOUNTED_PROBE)
|
||||
|
||||
// Nothing to be done. Just enable_z_probe below...
|
||||
|
||||
#endif
|
||||
|
||||
endstops.enable_z_probe();
|
||||
}
|
||||
|
||||
static void stow_z_probe() {
|
||||
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
||||
if (DEBUGGING(LEVELING)) DEBUG_POS("stow_z_probe", current_position);
|
||||
#endif
|
||||
|
||||
if (!endstops.z_probe_enabled) return;
|
||||
|
||||
#if HAS_Z_SERVO_ENDSTOP
|
||||
|
||||
// Make room for the servo
|
||||
raise_z_for_servo(Z_RAISE_AFTER_PROBING);
|
||||
|
||||
// Change the Z servo angle
|
||||
STOW_Z_SERVO();
|
||||
|
||||
#elif ENABLED(Z_PROBE_ALLEN_KEY)
|
||||
|
||||
float old_feedrate = feedrate;
|
||||
|
||||
// Move up for safety
|
||||
feedrate = Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE;
|
||||
|
||||
#if Z_RAISE_AFTER_PROBING > 0
|
||||
destination[Z_AXIS] = current_position[Z_AXIS] + Z_RAISE_AFTER_PROBING;
|
||||
prepare_move_to_destination_raw(); // this will also set_current_to_destination
|
||||
#endif
|
||||
|
||||
// Move to the start position to initiate retraction
|
||||
destination[X_AXIS] = Z_PROBE_ALLEN_KEY_STOW_1_X;
|
||||
destination[Y_AXIS] = Z_PROBE_ALLEN_KEY_STOW_1_Y;
|
||||
destination[Z_AXIS] = Z_PROBE_ALLEN_KEY_STOW_1_Z;
|
||||
prepare_move_to_destination_raw();
|
||||
|
||||
// Move the nozzle down to push the Z probe into retracted position
|
||||
if (Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE != Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE)
|
||||
feedrate = Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE;
|
||||
if (Z_PROBE_ALLEN_KEY_STOW_2_X != Z_PROBE_ALLEN_KEY_STOW_1_X)
|
||||
destination[X_AXIS] = Z_PROBE_ALLEN_KEY_STOW_2_X;
|
||||
if (Z_PROBE_ALLEN_KEY_STOW_2_Y != Z_PROBE_ALLEN_KEY_STOW_1_Y)
|
||||
destination[Y_AXIS] = Z_PROBE_ALLEN_KEY_STOW_2_Y;
|
||||
destination[Z_AXIS] = Z_PROBE_ALLEN_KEY_STOW_2_Z;
|
||||
prepare_move_to_destination_raw();
|
||||
|
||||
// Move up for safety
|
||||
if (Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE != Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE)
|
||||
feedrate = Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE;
|
||||
if (Z_PROBE_ALLEN_KEY_STOW_3_X != Z_PROBE_ALLEN_KEY_STOW_2_X)
|
||||
destination[X_AXIS] = Z_PROBE_ALLEN_KEY_STOW_3_X;
|
||||
if (Z_PROBE_ALLEN_KEY_STOW_3_Y != Z_PROBE_ALLEN_KEY_STOW_2_Y)
|
||||
destination[Y_AXIS] = Z_PROBE_ALLEN_KEY_STOW_3_Y;
|
||||
destination[Z_AXIS] = Z_PROBE_ALLEN_KEY_STOW_3_Z;
|
||||
prepare_move_to_destination_raw();
|
||||
|
||||
// Home XY for safety
|
||||
feedrate = homing_feedrate[X_AXIS] / 2;
|
||||
destination[X_AXIS] = 0;
|
||||
destination[Y_AXIS] = 0;
|
||||
prepare_move_to_destination_raw(); // this will also set_current_to_destination
|
||||
|
||||
feedrate = old_feedrate;
|
||||
|
||||
stepper.synchronize();
|
||||
|
||||
#if ENABLED(Z_MIN_PROBE_ENDSTOP)
|
||||
bool z_probe_endstop = (READ(Z_MIN_PROBE_PIN) != Z_MIN_PROBE_ENDSTOP_INVERTING);
|
||||
if (!z_probe_endstop)
|
||||
#else
|
||||
bool z_min_endstop = (READ(Z_MIN_PIN) != Z_MIN_ENDSTOP_INVERTING);
|
||||
if (!z_min_endstop)
|
||||
#endif
|
||||
{
|
||||
if (IsRunning()) {
|
||||
SERIAL_ERROR_START;
|
||||
SERIAL_ERRORLNPGM("Z-Probe failed to retract!");
|
||||
LCD_ALERTMESSAGEPGM("Err: ZPROBE");
|
||||
}
|
||||
stop();
|
||||
}
|
||||
|
||||
#elif ENABLED(FIX_MOUNTED_PROBE)
|
||||
|
||||
// Nothing to do here. Just clear endstops.z_probe_enabled
|
||||
|
||||
#endif
|
||||
|
||||
endstops.enable_z_probe(false);
|
||||
}
|
||||
|
||||
#endif // HAS_BED_PROBE
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_GRID)
|
||||
@ -1872,194 +2063,6 @@ static void setup_for_endstop_move() {
|
||||
refresh_cmd_timeout();
|
||||
}
|
||||
|
||||
#if HAS_BED_PROBE
|
||||
|
||||
static void deploy_z_probe() {
|
||||
|
||||
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
||||
if (DEBUGGING(LEVELING)) DEBUG_POS("deploy_z_probe", current_position);
|
||||
#endif
|
||||
|
||||
if (endstops.z_probe_enabled) return;
|
||||
|
||||
#if HAS_Z_SERVO_ENDSTOP
|
||||
|
||||
// Make room for Z Servo
|
||||
raise_z_for_servo(Z_RAISE_BEFORE_PROBING);
|
||||
|
||||
// Engage Z Servo endstop if enabled
|
||||
DEPLOY_Z_SERVO();
|
||||
|
||||
#elif ENABLED(Z_PROBE_ALLEN_KEY)
|
||||
float old_feedrate = feedrate;
|
||||
|
||||
feedrate = Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE;
|
||||
|
||||
// If endstop is already false, the Z probe is deployed
|
||||
#if ENABLED(Z_MIN_PROBE_ENDSTOP)
|
||||
bool z_probe_endstop = (READ(Z_MIN_PROBE_PIN) != Z_MIN_PROBE_ENDSTOP_INVERTING);
|
||||
if (z_probe_endstop)
|
||||
#else
|
||||
bool z_min_endstop = (READ(Z_MIN_PIN) != Z_MIN_ENDSTOP_INVERTING);
|
||||
if (z_min_endstop)
|
||||
#endif
|
||||
{
|
||||
// Move to the start position to initiate deployment
|
||||
destination[X_AXIS] = Z_PROBE_ALLEN_KEY_DEPLOY_1_X;
|
||||
destination[Y_AXIS] = Z_PROBE_ALLEN_KEY_DEPLOY_1_Y;
|
||||
destination[Z_AXIS] = Z_PROBE_ALLEN_KEY_DEPLOY_1_Z;
|
||||
prepare_move_to_destination_raw(); // this will also set_current_to_destination
|
||||
|
||||
// Move to engage deployment
|
||||
if (Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE != Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE)
|
||||
feedrate = Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE;
|
||||
if (Z_PROBE_ALLEN_KEY_DEPLOY_2_X != Z_PROBE_ALLEN_KEY_DEPLOY_1_X)
|
||||
destination[X_AXIS] = Z_PROBE_ALLEN_KEY_DEPLOY_2_X;
|
||||
if (Z_PROBE_ALLEN_KEY_DEPLOY_2_Y != Z_PROBE_ALLEN_KEY_DEPLOY_1_Y)
|
||||
destination[Y_AXIS] = Z_PROBE_ALLEN_KEY_DEPLOY_2_Y;
|
||||
if (Z_PROBE_ALLEN_KEY_DEPLOY_2_Z != Z_PROBE_ALLEN_KEY_DEPLOY_1_Z)
|
||||
destination[Z_AXIS] = Z_PROBE_ALLEN_KEY_DEPLOY_2_Z;
|
||||
prepare_move_to_destination_raw();
|
||||
|
||||
#ifdef Z_PROBE_ALLEN_KEY_DEPLOY_3_X
|
||||
if (Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE != Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE)
|
||||
feedrate = Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE;
|
||||
|
||||
// Move to trigger deployment
|
||||
if (Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE != Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE)
|
||||
feedrate = Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE;
|
||||
if (Z_PROBE_ALLEN_KEY_DEPLOY_3_X != Z_PROBE_ALLEN_KEY_DEPLOY_2_X)
|
||||
destination[X_AXIS] = Z_PROBE_ALLEN_KEY_DEPLOY_3_X;
|
||||
if (Z_PROBE_ALLEN_KEY_DEPLOY_3_Y != Z_PROBE_ALLEN_KEY_DEPLOY_2_Y)
|
||||
destination[Y_AXIS] = Z_PROBE_ALLEN_KEY_DEPLOY_3_Y;
|
||||
if (Z_PROBE_ALLEN_KEY_DEPLOY_3_Z != Z_PROBE_ALLEN_KEY_DEPLOY_2_Z)
|
||||
destination[Z_AXIS] = Z_PROBE_ALLEN_KEY_DEPLOY_3_Z;
|
||||
|
||||
prepare_move_to_destination_raw();
|
||||
#endif
|
||||
}
|
||||
|
||||
// Partially Home X,Y for safety
|
||||
destination[X_AXIS] *= 0.75;
|
||||
destination[Y_AXIS] *= 0.75;
|
||||
prepare_move_to_destination_raw(); // this will also set_current_to_destination
|
||||
|
||||
feedrate = old_feedrate;
|
||||
|
||||
stepper.synchronize();
|
||||
|
||||
#if ENABLED(Z_MIN_PROBE_ENDSTOP)
|
||||
z_probe_endstop = (READ(Z_MIN_PROBE_PIN) != Z_MIN_PROBE_ENDSTOP_INVERTING);
|
||||
if (z_probe_endstop)
|
||||
#else
|
||||
z_min_endstop = (READ(Z_MIN_PIN) != Z_MIN_ENDSTOP_INVERTING);
|
||||
if (z_min_endstop)
|
||||
#endif
|
||||
{
|
||||
if (IsRunning()) {
|
||||
SERIAL_ERROR_START;
|
||||
SERIAL_ERRORLNPGM("Z-Probe failed to engage!");
|
||||
LCD_ALERTMESSAGEPGM("Err: ZPROBE");
|
||||
}
|
||||
stop();
|
||||
}
|
||||
|
||||
#endif // Z_PROBE_ALLEN_KEY
|
||||
|
||||
#if ENABLED(FIX_MOUNTED_PROBE)
|
||||
// Nothing to be done. Just enable_z_probe below...
|
||||
#endif
|
||||
|
||||
endstops.enable_z_probe();
|
||||
|
||||
}
|
||||
|
||||
static void stow_z_probe() {
|
||||
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
||||
if (DEBUGGING(LEVELING)) DEBUG_POS("stow_z_probe", current_position);
|
||||
#endif
|
||||
|
||||
if (!endstops.z_probe_enabled) return;
|
||||
|
||||
#if HAS_Z_SERVO_ENDSTOP
|
||||
|
||||
// Make room for the servo
|
||||
raise_z_for_servo(Z_RAISE_AFTER_PROBING);
|
||||
|
||||
// Change the Z servo angle
|
||||
STOW_Z_SERVO();
|
||||
|
||||
#elif ENABLED(Z_PROBE_ALLEN_KEY)
|
||||
|
||||
float old_feedrate = feedrate;
|
||||
|
||||
// Move up for safety
|
||||
feedrate = Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE;
|
||||
|
||||
#if Z_RAISE_AFTER_PROBING > 0
|
||||
destination[Z_AXIS] = current_position[Z_AXIS] + Z_RAISE_AFTER_PROBING;
|
||||
prepare_move_to_destination_raw(); // this will also set_current_to_destination
|
||||
#endif
|
||||
|
||||
// Move to the start position to initiate retraction
|
||||
destination[X_AXIS] = Z_PROBE_ALLEN_KEY_STOW_1_X;
|
||||
destination[Y_AXIS] = Z_PROBE_ALLEN_KEY_STOW_1_Y;
|
||||
destination[Z_AXIS] = Z_PROBE_ALLEN_KEY_STOW_1_Z;
|
||||
prepare_move_to_destination_raw();
|
||||
|
||||
// Move the nozzle down to push the Z probe into retracted position
|
||||
if (Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE != Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE)
|
||||
feedrate = Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE;
|
||||
if (Z_PROBE_ALLEN_KEY_STOW_2_X != Z_PROBE_ALLEN_KEY_STOW_1_X)
|
||||
destination[X_AXIS] = Z_PROBE_ALLEN_KEY_STOW_2_X;
|
||||
if (Z_PROBE_ALLEN_KEY_STOW_2_Y != Z_PROBE_ALLEN_KEY_STOW_1_Y)
|
||||
destination[Y_AXIS] = Z_PROBE_ALLEN_KEY_STOW_2_Y;
|
||||
destination[Z_AXIS] = Z_PROBE_ALLEN_KEY_STOW_2_Z;
|
||||
prepare_move_to_destination_raw();
|
||||
|
||||
// Move up for safety
|
||||
if (Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE != Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE)
|
||||
feedrate = Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE;
|
||||
if (Z_PROBE_ALLEN_KEY_STOW_3_X != Z_PROBE_ALLEN_KEY_STOW_2_X)
|
||||
destination[X_AXIS] = Z_PROBE_ALLEN_KEY_STOW_3_X;
|
||||
if (Z_PROBE_ALLEN_KEY_STOW_3_Y != Z_PROBE_ALLEN_KEY_STOW_2_Y)
|
||||
destination[Y_AXIS] = Z_PROBE_ALLEN_KEY_STOW_3_Y;
|
||||
destination[Z_AXIS] = Z_PROBE_ALLEN_KEY_STOW_3_Z;
|
||||
prepare_move_to_destination_raw();
|
||||
|
||||
// Home XY for safety
|
||||
feedrate = homing_feedrate[X_AXIS] / 2;
|
||||
destination[X_AXIS] = 0;
|
||||
destination[Y_AXIS] = 0;
|
||||
prepare_move_to_destination_raw(); // this will also set_current_to_destination
|
||||
|
||||
feedrate = old_feedrate;
|
||||
|
||||
stepper.synchronize();
|
||||
|
||||
#if ENABLED(Z_MIN_PROBE_ENDSTOP)
|
||||
bool z_probe_endstop = (READ(Z_MIN_PROBE_PIN) != Z_MIN_PROBE_ENDSTOP_INVERTING);
|
||||
if (!z_probe_endstop)
|
||||
#else
|
||||
bool z_min_endstop = (READ(Z_MIN_PIN) != Z_MIN_ENDSTOP_INVERTING);
|
||||
if (!z_min_endstop)
|
||||
#endif
|
||||
{
|
||||
if (IsRunning()) {
|
||||
SERIAL_ERROR_START;
|
||||
SERIAL_ERRORLNPGM("Z-Probe failed to retract!");
|
||||
LCD_ALERTMESSAGEPGM("Err: ZPROBE");
|
||||
}
|
||||
stop();
|
||||
}
|
||||
#elif ENABLED(FIX_MOUNTED_PROBE)
|
||||
// Nothing to do here. Just clear endstops.z_probe_enabled
|
||||
#endif
|
||||
|
||||
endstops.enable_z_probe(false);
|
||||
}
|
||||
#endif // HAS_BED_PROBE
|
||||
|
||||
enum ProbeAction {
|
||||
ProbeStay = 0,
|
||||
ProbeDeploy = _BV(0),
|
||||
@ -2306,7 +2309,7 @@ static void homeaxis(AxisEnum axis) {
|
||||
#if ENABLED(Z_PROBE_SLED)
|
||||
#define _Z_DEPLOY (dock_sled(false))
|
||||
#define _Z_STOW (dock_sled(true))
|
||||
#elif ENABLED(AUTO_BED_LEVELING_FEATURE) && (HAS_Z_SERVO_ENDSTOP || ENABLED(FIX_MOUNTED_PROBE))
|
||||
#elif (ENABLED(AUTO_BED_LEVELING_FEATURE) && HAS_Z_SERVO_ENDSTOP) || ENABLED(FIX_MOUNTED_PROBE)
|
||||
#define _Z_DEPLOY (deploy_z_probe())
|
||||
#define _Z_STOW (stow_z_probe())
|
||||
#elif HAS_Z_SERVO_ENDSTOP
|
||||
|
||||
Loading…
Reference in New Issue
Block a user