From 3b50a5e2e672ffbc802777cb63b062cc6ef795d7 Mon Sep 17 00:00:00 2001 From: CONSULitAS Date: Tue, 20 Jan 2015 20:46:20 +0100 Subject: [PATCH] Add: Board for Vellemann K8200 (derived from 3Drag) ## Add: Board for Vellemann K8200 (derived from 3Drag) * Boards.h: updated comment for board 3Drag - K8200 removed * Boards.h: added `BOARD_K8200` with ID 78 * language.h.: machine name and firmware URL for new board * pins.h: added `K8200` to any `#if` with `3Drag` and corresponding comments --- Marlin/boards.h | 3 ++- Marlin/language.h | 3 +++ Marlin/pins.h | 18 +++++++++--------- 3 files changed, 14 insertions(+), 10 deletions(-) diff --git a/Marlin/boards.h b/Marlin/boards.h index 7f2194695..1670ad702 100644 --- a/Marlin/boards.h +++ b/Marlin/boards.h @@ -28,7 +28,8 @@ #define BOARD_ULTIMAKER 7 // Ultimaker #define BOARD_ULTIMAKER_OLD 71 // Ultimaker (Older electronics. Pre 1.5.4. This is rare) #define BOARD_ULTIMAIN_2 72 // Ultimainboard 2.x (Uses TEMP_SENSOR 20) -#define BOARD_3DRAG 77 // 3Drag Controller / Vellemann K8200 Controller +#define BOARD_3DRAG 77 // 3Drag Controller +#define BOARD_K8200 78 // Vellemann K8200 Controller (derived from 3Drag Controller) #define BOARD_TEENSYLU 8 // Teensylu #define BOARD_RUMBA 80 // Rumba #define BOARD_PRINTRBOARD 81 // Printrboard (AT90USB1286) diff --git a/Marlin/language.h b/Marlin/language.h index 36f42217f..8dd0250ca 100644 --- a/Marlin/language.h +++ b/Marlin/language.h @@ -41,6 +41,9 @@ #elif MB(3DRAG) #define MACHINE_NAME "3Drag" #define FIRMWARE_URL "http://3dprint.elettronicain.it/" +#elif MB(K8200) + #define MACHINE_NAME "K8200" + #define FIRMWARE_URL "https://github.com/MarlinFirmware/Marlin" #elif MB(5DPRINT) #define MACHINE_NAME "Makibox" #define FIRMWARE_URL "https://github.com/MarlinFirmware/Marlin" diff --git a/Marlin/pins.h b/Marlin/pins.h index 0cca6c570..541ff0ca1 100644 --- a/Marlin/pins.h +++ b/Marlin/pins.h @@ -530,7 +530,7 @@ * Arduino Mega pin assignment * ****************************************************************************************/ -#if IS_RAMPS || MB(3DRAG) || MB(AZTEEG_X3) || MB(AZTEEG_X3_PRO) +#if IS_RAMPS || MB(3DRAG) || MB(K8200) || MB(AZTEEG_X3) || MB(AZTEEG_X3_PRO) #define KNOWN_BOARD 1 //////////////////FIX THIS////////////// @@ -546,11 +546,11 @@ // #define RAMPS_V_1_0 -#if (IS_RAMPS && !MB(RAMPS_OLD)) || MB(3DRAG) || MB(AZTEEG_X3) || MB(AZTEEG_X3_PRO) +#if (IS_RAMPS && !MB(RAMPS_OLD)) || MB(3DRAG) || MB(K8200) || MB(AZTEEG_X3) || MB(AZTEEG_X3_PRO) #define LARGE_FLASH true - #if MB(3DRAG) + #if MB(3DRAG) || MB(K8200) #define X_STEP_PIN 54 #define X_DIR_PIN 55 #define X_ENABLE_PIN 38 @@ -661,7 +661,7 @@ #define FAN_PIN 4 // IO pin. Buffer needed #endif - #if MB(3DRAG) || MB(RAMPS_13_EEF) + #if MB(3DRAG) || MB(K8200) || MB(RAMPS_13_EEF) #define FAN_PIN 8 #endif @@ -690,7 +690,7 @@ #endif - #if MB(3DRAG) + #if MB(3DRAG) || MB(K8200) #define HEATER_0_PIN 10 #define HEATER_1_PIN 12 #define HEATER_2_PIN 6 @@ -720,7 +720,7 @@ #if MB(RAMPS_13_EFF) || MB(RAMPS_13_EEF) #define HEATER_BED_PIN -1 // NO BED #else - #if MB(3DRAG) + #if MB(3DRAG) || MB(K8200) #define HEATER_BED_PIN 9 // BED #else #define HEATER_BED_PIN 8 // BED @@ -813,7 +813,7 @@ #endif - #if MB(3DRAG) + #if MB(3DRAG) || MB(K8200) #define BEEPER -1 #define LCD_PINS_RS 27 @@ -895,7 +895,7 @@ #define TEMP_2_PIN -1 #define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! -#endif // RAMPS_13_EFB || RAMPS_13_EEB || RAMPS_13_EFF || 3DRAG +#endif // RAMPS_13_EFB || RAMPS_13_EEB || RAMPS_13_EFF || 3DRAG || K8200 // SPI for Max6675 Thermocouple @@ -909,7 +909,7 @@ #define MAX6675_SS 66// Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present #endif -#endif // RAMPS_OLD || RAMPS_13_EFB || RAMPS_13_EEB || RAMPS_13_EFF || 3DRAG +#endif // RAMPS_OLD || RAMPS_13_EFB || RAMPS_13_EEB || RAMPS_13_EFF || 3DRAG || K8200 /**************************************************************************************** * Duemilanove w/ ATMega328P pin assignment