diff --git a/Marlin/src/HAL/AVR/HAL_SPI.cpp b/Marlin/src/HAL/AVR/HAL_SPI.cpp
index 3e5572e55..1a1b98b3d 100644
--- a/Marlin/src/HAL/AVR/HAL_SPI.cpp
+++ b/Marlin/src/HAL/AVR/HAL_SPI.cpp
@@ -88,7 +88,7 @@ void spiBegin() {
   }
 
   /** SPI read data  */
-  void spiRead(uint8_t* buf, uint16_t nbyte) {
+  void spiRead(uint8_t *buf, uint16_t nbyte) {
     if (nbyte-- == 0) return;
     SPDR = 0xFF;
     for (uint16_t i = 0; i < nbyte; i++) {
@@ -107,7 +107,7 @@ void spiBegin() {
   }
 
   /** SPI send block  */
-  void spiSendBlock(uint8_t token, const uint8_t* buf) {
+  void spiSendBlock(uint8_t token, const uint8_t *buf) {
     SPDR = token;
     for (uint16_t i = 0; i < 512; i += 2) {
       while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
@@ -215,7 +215,7 @@ void spiBegin() {
   }
 
   // Soft SPI read data
-  void spiRead(uint8_t* buf, uint16_t nbyte) {
+  void spiRead(uint8_t *buf, uint16_t nbyte) {
     for (uint16_t i = 0; i < nbyte; i++)
       buf[i] = spiRec();
   }
@@ -242,7 +242,7 @@ void spiBegin() {
   }
 
   // Soft SPI send block
-  void spiSendBlock(uint8_t token, const uint8_t* buf) {
+  void spiSendBlock(uint8_t token, const uint8_t *buf) {
     spiSend(token);
     for (uint16_t i = 0; i < 512; i++)
       spiSend(buf[i]);
diff --git a/Marlin/src/HAL/DUE/HAL_SPI.cpp b/Marlin/src/HAL/DUE/HAL_SPI.cpp
index 6cb2912c1..f42e8a980 100644
--- a/Marlin/src/HAL/DUE/HAL_SPI.cpp
+++ b/Marlin/src/HAL/DUE/HAL_SPI.cpp
@@ -56,8 +56,8 @@
   #pragma GCC optimize (3)
 
   typedef uint8_t (*pfnSpiTransfer)(uint8_t b);
-  typedef void    (*pfnSpiRxBlock)(uint8_t* buf, uint32_t nbyte);
-  typedef void    (*pfnSpiTxBlock)(const uint8_t* buf, uint32_t nbyte);
+  typedef void    (*pfnSpiRxBlock)(uint8_t *buf, uint32_t nbyte);
+  typedef void    (*pfnSpiTxBlock)(const uint8_t *buf, uint32_t nbyte);
 
   /* ---------------- Macros to be able to access definitions from asm */
   #define _PORT(IO) DIO ##  IO ## _WPORT
@@ -270,7 +270,7 @@
   static pfnSpiTransfer spiTransferTx = (pfnSpiTransfer)spiTransferX;
 
   // Block transfers run at ~8 .. ~10Mhz - Tx version (Rx data discarded)
-  static void spiTxBlock0(const uint8_t* ptr, uint32_t todo) {
+  static void spiTxBlock0(const uint8_t *ptr, uint32_t todo) {
     uint32_t MOSI_PORT_PLUS30 = ((uint32_t) PORT(SD_MOSI_PIN)) + 0x30;  /* SODR of port */
     uint32_t MOSI_MASK = PIN_MASK(SD_MOSI_PIN);
     uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SD_SCK_PIN)) + 0x30;    /* SODR of port */
@@ -349,7 +349,7 @@
     );
   }
 
-  static void spiRxBlock0(uint8_t* ptr, uint32_t todo) {
+  static void spiRxBlock0(uint8_t *ptr, uint32_t todo) {
     uint32_t bin = 0;
     uint32_t work = 0;
     uint32_t BITBAND_MISO_PORT = BITBAND_ADDRESS( ((uint32_t)PORT(SD_MISO_PIN))+0x3C, PIN_SHIFT(SD_MISO_PIN));  /* PDSR of port in bitband area */
@@ -425,13 +425,13 @@
     );
   }
 
-  static void spiTxBlockX(const uint8_t* buf, uint32_t todo) {
+  static void spiTxBlockX(const uint8_t *buf, uint32_t todo) {
     do {
       (void)spiTransferTx(*buf++);
     } while (--todo);
   }
 
-  static void spiRxBlockX(uint8_t* buf, uint32_t todo) {
+  static void spiRxBlockX(uint8_t *buf, uint32_t todo) {
     do {
       *buf++ = spiTransferRx(0xFF);
     } while (--todo);
@@ -463,7 +463,7 @@
     return b;
   }
 
-  void spiRead(uint8_t* buf, uint16_t nbyte) {
+  void spiRead(uint8_t *buf, uint16_t nbyte) {
     if (nbyte) {
       _SS_WRITE(LOW);
       WRITE(SD_MOSI_PIN, HIGH); // Output 1s 1
@@ -478,7 +478,7 @@
     _SS_WRITE(HIGH);
   }
 
-  void spiSendBlock(uint8_t token, const uint8_t* buf) {
+  void spiSendBlock(uint8_t token, const uint8_t *buf) {
     _SS_WRITE(LOW);
     (void)spiTransferTx(token);
     spiTxBlock(buf, 512);
@@ -645,7 +645,7 @@
     }
 
     // Read from SPI into buffer
-    void spiRead(uint8_t* buf, uint16_t nbyte) {
+    void spiRead(uint8_t *buf, uint16_t nbyte) {
       if (!nbyte) return;
       --nbyte;
       for (int i = 0; i < nbyte; i++) {
@@ -668,7 +668,7 @@
       //DELAY_US(1U);
     }
 
-    void spiSend(const uint8_t* buf, size_t nbyte) {
+    void spiSend(const uint8_t *buf, size_t nbyte) {
       if (!nbyte) return;
       --nbyte;
       for (size_t i = 0; i < nbyte; i++) {
@@ -689,7 +689,7 @@
       FLUSH_RX();
     }
 
-    void spiSend(uint32_t chan, const uint8_t* buf, size_t nbyte) {
+    void spiSend(uint32_t chan, const uint8_t *buf, size_t nbyte) {
       if (!nbyte) return;
       --nbyte;
       for (size_t i = 0; i < nbyte; i++) {
@@ -702,7 +702,7 @@
     }
 
     // Write from buffer to SPI
-    void spiSendBlock(uint8_t token, const uint8_t* buf) {
+    void spiSendBlock(uint8_t token, const uint8_t *buf) {
       SPI0->SPI_TDR = (uint32_t)token | SPI_PCS(SPI_CHAN);
       WHILE_TX(0);
       //WHILE_RX(0);
@@ -801,19 +801,19 @@
 
     uint8_t spiRec() { return (uint8_t)spiTransfer(0xFF); }
 
-    void spiRead(uint8_t* buf, uint16_t nbyte) {
+    void spiRead(uint8_t *buf, uint16_t nbyte) {
       for (int i = 0; i < nbyte; i++)
         buf[i] = spiTransfer(0xFF);
     }
 
     void spiSend(uint8_t data) { spiTransfer(data); }
 
-    void spiSend(const uint8_t* buf, size_t nbyte) {
+    void spiSend(const uint8_t *buf, size_t nbyte) {
       for (uint16_t i = 0; i < nbyte; i++)
         spiTransfer(buf[i]);
     }
 
-    void spiSendBlock(uint8_t token, const uint8_t* buf) {
+    void spiSendBlock(uint8_t token, const uint8_t *buf) {
       spiTransfer(token);
       for (uint16_t i = 0; i < 512; i++)
         spiTransfer(buf[i]);
diff --git a/Marlin/src/HAL/DUE/eeprom_flash.cpp b/Marlin/src/HAL/DUE/eeprom_flash.cpp
index 738f44acc..14c843576 100644
--- a/Marlin/src/HAL/DUE/eeprom_flash.cpp
+++ b/Marlin/src/HAL/DUE/eeprom_flash.cpp
@@ -139,7 +139,7 @@ static void ee_Dump(const int page, const void* data) {
 
   #ifdef EE_EMU_DEBUG
 
-    const uint8_t* c = (const uint8_t*) data;
+    const uint8_t *c = (const uint8_t*) data;
     char buffer[80];
 
     sprintf_P(buffer, PSTR("Page: %d (0x%04x)\n"), page, page);
@@ -293,8 +293,8 @@ static bool ee_PageWrite(uint16_t page, const void* data) {
       ee_Dump(-page, data);
 
       // Calculate count of changed bits
-      uint32_t* p1 = (uint32_t*)addrflash;
-      uint32_t* p2 = (uint32_t*)data;
+      uint32_t *p1 = (uint32_t*)addrflash;
+      uint32_t *p2 = (uint32_t*)data;
       int count = 0;
       for (i =0; i<PageSize >> 2; i++) {
         if (p1[i] != p2[i]) {
@@ -470,7 +470,7 @@ static uint8_t ee_Read(uint32_t address, bool excludeRAMBuffer=false) {
   for (int page = curPage - 1; page >= 0; --page) {
 
     // Get a pointer to the flash page
-    uint8_t* pflash = (uint8_t*)getFlashStorage(page + curGroup * PagesPerGroup);
+    uint8_t *pflash = (uint8_t*)getFlashStorage(page + curGroup * PagesPerGroup);
 
     uint16_t i = 0;
     while (i <= (PageSize - 4)) { /* (PageSize - 4) because otherwise, there is not enough room for data and headers */
@@ -550,7 +550,7 @@ static uint32_t ee_GetAddrRange(uint32_t address, bool excludeRAMBuffer=false) {
   for (int page = curPage - 1; page >= 0; --page) {
 
     // Get a pointer to the flash page
-    uint8_t* pflash = (uint8_t*)getFlashStorage(page + curGroup * PagesPerGroup);
+    uint8_t *pflash = (uint8_t*)getFlashStorage(page + curGroup * PagesPerGroup);
 
     uint16_t i = 0;
     while (i <= (PageSize - 4)) { /* (PageSize - 4) because otherwise, there is not enough room for data and headers */
@@ -589,7 +589,7 @@ static uint32_t ee_GetAddrRange(uint32_t address, bool excludeRAMBuffer=false) {
 }
 
 static bool ee_IsPageClean(int page) {
-  uint32_t* pflash = (uint32_t*) getFlashStorage(page);
+  uint32_t *pflash = (uint32_t*) getFlashStorage(page);
   for (uint16_t i = 0; i < (PageSize >> 2); ++i)
     if (*pflash++ != 0xFFFFFFFF) return false;
   return true;
@@ -599,7 +599,7 @@ static bool ee_Flush(uint32_t overrideAddress = 0xFFFFFFFF, uint8_t overrideData
 
   // Check if RAM buffer has something to be written
   bool isEmpty = true;
-  uint32_t* p = (uint32_t*) &buffer[0];
+  uint32_t *p = (uint32_t*) &buffer[0];
   for (uint16_t j = 0; j < (PageSize >> 2); j++) {
     if (*p++ != 0xFFFFFFFF) {
       isEmpty = false;
diff --git a/Marlin/src/HAL/DUE/usb/udi_cdc.h b/Marlin/src/HAL/DUE/usb/udi_cdc.h
index 0ecf7bb00..b61845011 100644
--- a/Marlin/src/HAL/DUE/usb/udi_cdc.h
+++ b/Marlin/src/HAL/DUE/usb/udi_cdc.h
@@ -675,11 +675,11 @@ iram_size_t udi_cdc_multi_write_buf(uint8_t port, const void* buf, iram_size_t s
  *   - \code // Waits and gets a value on CDC line
 	int udi_cdc_getc(void);
 	// Reads a RAM buffer on CDC line
-	iram_size_t udi_cdc_read_buf(int* buf, iram_size_t size);
+	iram_size_t udi_cdc_read_buf(int *buf, iram_size_t size);
 	// Puts a byte on CDC line
 	int udi_cdc_putc(int value);
 	// Writes a RAM buffer on CDC line
-	iram_size_t udi_cdc_write_buf(const int* buf, iram_size_t size); \endcode
+	iram_size_t udi_cdc_write_buf(const int *buf, iram_size_t size); \endcode
  *
  * \section udi_cdc_use_cases Advanced use cases
  * For more advanced use of the UDI CDC module, see the following use cases:
diff --git a/Marlin/src/HAL/DUE/usb/usb_task.c b/Marlin/src/HAL/DUE/usb/usb_task.c
index 66bdb265d..acb1d5b93 100644
--- a/Marlin/src/HAL/DUE/usb/usb_task.c
+++ b/Marlin/src/HAL/DUE/usb/usb_task.c
@@ -264,7 +264,7 @@ bool usb_task_extra_string(void) {
 ** Handle device requests that the ASF stack doesn't
 */
 bool usb_task_other_requests(void) {
-  uint8_t* ptr = 0;
+  uint8_t *ptr = 0;
   uint16_t size = 0;
 
   if (Udd_setup_type() == USB_REQ_TYPE_VENDOR) {
diff --git a/Marlin/src/HAL/ESP32/HAL_SPI.cpp b/Marlin/src/HAL/ESP32/HAL_SPI.cpp
index 8ee837ba1..8743ac5be 100644
--- a/Marlin/src/HAL/ESP32/HAL_SPI.cpp
+++ b/Marlin/src/HAL/ESP32/HAL_SPI.cpp
@@ -85,7 +85,7 @@ uint8_t spiRec() {
   return returnByte;
 }
 
-void spiRead(uint8_t* buf, uint16_t nbyte) {
+void spiRead(uint8_t *buf, uint16_t nbyte) {
   SPI.beginTransaction(spiConfig);
   SPI.transferBytes(0, buf, nbyte);
   SPI.endTransaction();
@@ -97,7 +97,7 @@ void spiSend(uint8_t b) {
   SPI.endTransaction();
 }
 
-void spiSendBlock(uint8_t token, const uint8_t* buf) {
+void spiSendBlock(uint8_t token, const uint8_t *buf) {
   SPI.beginTransaction(spiConfig);
   SPI.transfer(token);
   SPI.writeBytes(const_cast<uint8_t*>(buf), 512);
diff --git a/Marlin/src/HAL/ESP32/WebSocketSerial.cpp b/Marlin/src/HAL/ESP32/WebSocketSerial.cpp
index 8825742d3..96769f261 100644
--- a/Marlin/src/HAL/ESP32/WebSocketSerial.cpp
+++ b/Marlin/src/HAL/ESP32/WebSocketSerial.cpp
@@ -137,7 +137,7 @@ size_t WebSocketSerial::write(const uint8_t c) {
   return ret;
 }
 
-size_t WebSocketSerial::write(const uint8_t* buffer, size_t size) {
+size_t WebSocketSerial::write(const uint8_t *buffer, size_t size) {
   size_t written = 0;
   for (size_t i = 0; i < size; i++)
     written += write(buffer[i]);
diff --git a/Marlin/src/HAL/ESP32/WebSocketSerial.h b/Marlin/src/HAL/ESP32/WebSocketSerial.h
index 924d36f15..574f7b10f 100644
--- a/Marlin/src/HAL/ESP32/WebSocketSerial.h
+++ b/Marlin/src/HAL/ESP32/WebSocketSerial.h
@@ -54,7 +54,7 @@ public:
   ring_buffer_pos_t read(uint8_t *buffer);
   void flush();
   ring_buffer_pos_t write(const uint8_t c);
-  ring_buffer_pos_t write(const uint8_t* buffer, ring_buffer_pos_t size);
+  ring_buffer_pos_t write(const uint8_t *buffer, ring_buffer_pos_t size);
 };
 
 class WebSocketSerial: public Stream {
@@ -70,7 +70,7 @@ public:
   int read();
   void flush();
   size_t write(const uint8_t c);
-  size_t write(const uint8_t* buffer, size_t size);
+  size_t write(const uint8_t *buffer, size_t size);
 
   #if ENABLED(SERIAL_STATS_DROPPED_RX)
     FORCE_INLINE uint32_t dropped() { return 0; }
diff --git a/Marlin/src/HAL/LPC1768/HAL_SPI.cpp b/Marlin/src/HAL/LPC1768/HAL_SPI.cpp
index dbc89a33f..99db15f6e 100644
--- a/Marlin/src/HAL/LPC1768/HAL_SPI.cpp
+++ b/Marlin/src/HAL/LPC1768/HAL_SPI.cpp
@@ -93,12 +93,12 @@
 
   void spiSend(uint8_t b) { (void)spiTransfer(b); }
 
-  void spiSend(const uint8_t* buf, size_t nbyte) {
+  void spiSend(const uint8_t *buf, size_t nbyte) {
     for (uint16_t i = 0; i < nbyte; i++)
       (void)spiTransfer(buf[i]);
   }
 
-  void spiSendBlock(uint8_t token, const uint8_t* buf) {
+  void spiSendBlock(uint8_t token, const uint8_t *buf) {
     (void)spiTransfer(token);
     for (uint16_t i = 0; i < 512; i++)
       (void)spiTransfer(buf[i]);
@@ -135,13 +135,13 @@
 
   void spiSend(uint8_t b) { doio(b); }
 
-  void spiSend(const uint8_t* buf, size_t nbyte) {
+  void spiSend(const uint8_t *buf, size_t nbyte) {
     for (uint16_t i = 0; i < nbyte; i++) doio(buf[i]);
   }
 
   void spiSend(uint32_t chan, byte b) {}
 
-  void spiSend(uint32_t chan, const uint8_t* buf, size_t nbyte) {}
+  void spiSend(uint32_t chan, const uint8_t *buf, size_t nbyte) {}
 
   // Read single byte from SPI
   uint8_t spiRec() { return doio(0xFF); }
@@ -156,7 +156,7 @@
   uint8_t spiTransfer(uint8_t b) { return doio(b); }
 
   // Write from buffer to SPI
-  void spiSendBlock(uint8_t token, const uint8_t* buf) {
+  void spiSendBlock(uint8_t token, const uint8_t *buf) {
    (void)spiTransfer(token);
     for (uint16_t i = 0; i < 512; i++)
       (void)spiTransfer(buf[i]);
diff --git a/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_st7920_hw_spi.cpp b/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_st7920_hw_spi.cpp
index 592e27f6c..0b0626de7 100644
--- a/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_st7920_hw_spi.cpp
+++ b/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_st7920_hw_spi.cpp
@@ -66,7 +66,7 @@
 void spiBegin();
 void spiInit(uint8_t spiRate);
 void spiSend(uint8_t b);
-void spiSend(const uint8_t* buf, size_t n);
+void spiSend(const uint8_t *buf, size_t n);
 
 static uint8_t rs_last_state = 255;
 
diff --git a/Marlin/src/HAL/SAMD51/HAL_SPI.cpp b/Marlin/src/HAL/SAMD51/HAL_SPI.cpp
index c3acd3823..77f4d5ecd 100644
--- a/Marlin/src/HAL/SAMD51/HAL_SPI.cpp
+++ b/Marlin/src/HAL/SAMD51/HAL_SPI.cpp
@@ -103,7 +103,7 @@
    * @param  nbyte Number of bytes to receive.
    * @return Nothing
    */
-  void spiRead(uint8_t* buf, uint16_t nbyte) {
+  void spiRead(uint8_t *buf, uint16_t nbyte) {
     if (nbyte == 0) return;
     memset(buf, 0xFF, nbyte);
     sdSPI.beginTransaction(spiConfig);
@@ -132,7 +132,7 @@
    *
    * @details Uses DMA
    */
-  void spiSendBlock(uint8_t token, const uint8_t* buf) {
+  void spiSendBlock(uint8_t token, const uint8_t *buf) {
     sdSPI.beginTransaction(spiConfig);
     sdSPI.transfer(token);
     sdSPI.transfer((uint8_t*)buf, nullptr, 512);
diff --git a/Marlin/src/HAL/STM32/HAL_SPI.cpp b/Marlin/src/HAL/STM32/HAL_SPI.cpp
index c9f23e6fa..80347e115 100644
--- a/Marlin/src/HAL/STM32/HAL_SPI.cpp
+++ b/Marlin/src/HAL/STM32/HAL_SPI.cpp
@@ -193,7 +193,7 @@ static SPISettings spiConfig;
    *
    * @details Uses DMA
    */
-  void spiRead(uint8_t* buf, uint16_t nbyte) {
+  void spiRead(uint8_t *buf, uint16_t nbyte) {
     if (nbyte == 0) return;
     memset(buf, 0xFF, nbyte);
     SPI.transfer(buf, nbyte);
@@ -218,7 +218,7 @@ static SPISettings spiConfig;
    *
    * @details Use DMA
    */
-  void spiSendBlock(uint8_t token, const uint8_t* buf) {
+  void spiSendBlock(uint8_t token, const uint8_t *buf) {
     uint8_t rxBuf[512];
     SPI.transfer(token);
     SPI.transfer((uint8_t*)buf, &rxBuf, 512);
diff --git a/Marlin/src/HAL/STM32/MarlinSerial.h b/Marlin/src/HAL/STM32/MarlinSerial.h
index 7b0529cfd..d9e845701 100644
--- a/Marlin/src/HAL/STM32/MarlinSerial.h
+++ b/Marlin/src/HAL/STM32/MarlinSerial.h
@@ -36,7 +36,7 @@ struct MarlinSerial : public HardwareSerial {
   void begin(unsigned long baud, uint8_t config);
   inline void begin(unsigned long baud) { begin(baud, SERIAL_8N1); }
 
-  void _rx_complete_irq(serial_t* obj);
+  void _rx_complete_irq(serial_t *obj);
 
 protected:
   usart_rx_callback_t _rx_callback;
diff --git a/Marlin/src/HAL/STM32F1/HAL_SPI.cpp b/Marlin/src/HAL/STM32F1/HAL_SPI.cpp
index 7e876f765..abb348d74 100644
--- a/Marlin/src/HAL/STM32F1/HAL_SPI.cpp
+++ b/Marlin/src/HAL/STM32F1/HAL_SPI.cpp
@@ -123,7 +123,7 @@ uint8_t spiRec() {
  *
  * @details Uses DMA
  */
-void spiRead(uint8_t* buf, uint16_t nbyte) {
+void spiRead(uint8_t *buf, uint16_t nbyte) {
   SPI.dmaTransfer(0, const_cast<uint8_t*>(buf), nbyte);
 }
 
@@ -146,7 +146,7 @@ void spiSend(uint8_t b) {
  *
  * @details Use DMA
  */
-void spiSendBlock(uint8_t token, const uint8_t* buf) {
+void spiSendBlock(uint8_t token, const uint8_t *buf) {
   SPI.send(token);
   SPI.dmaSend(const_cast<uint8_t*>(buf), 512);
 }
@@ -160,7 +160,7 @@ uint8_t spiRec(uint32_t chan) { return SPI.transfer(0xFF); }
 void spiSend(uint32_t chan, byte b) { SPI.send(b); }
 
 // Write buffer to specified SPI channel
-void spiSend(uint32_t chan, const uint8_t* buf, size_t n) {
+void spiSend(uint32_t chan, const uint8_t *buf, size_t n) {
   for (size_t p = 0; p < n; p++) spiSend(chan, buf[p]);
 }
 
diff --git a/Marlin/src/HAL/STM32F1/eeprom_flash.cpp b/Marlin/src/HAL/STM32F1/eeprom_flash.cpp
index dfcaaaf29..e7d9dd29e 100644
--- a/Marlin/src/HAL/STM32F1/eeprom_flash.cpp
+++ b/Marlin/src/HAL/STM32F1/eeprom_flash.cpp
@@ -48,8 +48,8 @@ static uint8_t ram_eeprom[MARLIN_EEPROM_SIZE] __attribute__((aligned(4))) = {0};
 static bool eeprom_dirty = false;
 
 bool PersistentStore::access_start() {
-  const uint32_t* source = reinterpret_cast<const uint32_t*>(EEPROM_PAGE0_BASE);
-  uint32_t* destination = reinterpret_cast<uint32_t*>(ram_eeprom);
+  const uint32_t *source = reinterpret_cast<const uint32_t*>(EEPROM_PAGE0_BASE);
+  uint32_t *destination = reinterpret_cast<uint32_t*>(ram_eeprom);
 
   static_assert(0 == (MARLIN_EEPROM_SIZE) % 4, "MARLIN_EEPROM_SIZE is corrupted. (Must be a multiple of 4.)"); // Ensure copying as uint32_t is safe
   constexpr size_t eeprom_size_u32 = (MARLIN_EEPROM_SIZE) / 4;
diff --git a/Marlin/src/HAL/TEENSY31_32/HAL_SPI.cpp b/Marlin/src/HAL/TEENSY31_32/HAL_SPI.cpp
index dce236ef6..21330eaac 100644
--- a/Marlin/src/HAL/TEENSY31_32/HAL_SPI.cpp
+++ b/Marlin/src/HAL/TEENSY31_32/HAL_SPI.cpp
@@ -82,7 +82,7 @@ uint8_t spiRec() {
 }
 
 // SPI read data
-void spiRead(uint8_t* buf, uint16_t nbyte) {
+void spiRead(uint8_t *buf, uint16_t nbyte) {
   SPI.beginTransaction(spiConfig);
   SPI.transfer(buf, nbyte);
   SPI.endTransaction();
@@ -107,7 +107,7 @@ void spiSend(uint8_t b) {
 }
 
 // SPI send block
-void spiSendBlock(uint8_t token, const uint8_t* buf) {
+void spiSendBlock(uint8_t token, const uint8_t *buf) {
   SPI.beginTransaction(spiConfig);
   SPDR = token;
   for (uint16_t i = 0; i < 512; i += 2) {
diff --git a/Marlin/src/HAL/TEENSY35_36/HAL_SPI.cpp b/Marlin/src/HAL/TEENSY35_36/HAL_SPI.cpp
index 84852cd35..5b22668fc 100644
--- a/Marlin/src/HAL/TEENSY35_36/HAL_SPI.cpp
+++ b/Marlin/src/HAL/TEENSY35_36/HAL_SPI.cpp
@@ -80,7 +80,7 @@ uint8_t spiRec() {
   //return SPDR;
 }
 
-void spiRead(uint8_t* buf, uint16_t nbyte) {
+void spiRead(uint8_t *buf, uint16_t nbyte) {
   SPI.beginTransaction(spiConfig);
   SPI.transfer(buf, nbyte);
   SPI.endTransaction();
@@ -103,7 +103,7 @@ void spiSend(uint8_t b) {
   //while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
 }
 
-void spiSendBlock(uint8_t token, const uint8_t* buf) {
+void spiSendBlock(uint8_t token, const uint8_t *buf) {
   SPI.beginTransaction(spiConfig);
   SPDR = token;
   for (uint16_t i = 0; i < 512; i += 2) {
diff --git a/Marlin/src/HAL/TEENSY40_41/HAL_SPI.cpp b/Marlin/src/HAL/TEENSY40_41/HAL_SPI.cpp
index 8c9304902..e4335ff74 100644
--- a/Marlin/src/HAL/TEENSY40_41/HAL_SPI.cpp
+++ b/Marlin/src/HAL/TEENSY40_41/HAL_SPI.cpp
@@ -97,7 +97,7 @@ uint8_t spiRec() {
   //return SPDR;
 }
 
-void spiRead(uint8_t* buf, uint16_t nbyte) {
+void spiRead(uint8_t *buf, uint16_t nbyte) {
   SPI.beginTransaction(spiConfig);
   SPI.transfer(buf, nbyte);
   SPI.endTransaction();
@@ -120,7 +120,7 @@ void spiSend(uint8_t b) {
   //while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
 }
 
-void spiSendBlock(uint8_t token, const uint8_t* buf) {
+void spiSendBlock(uint8_t token, const uint8_t *buf) {
   SPI.beginTransaction(spiConfig);
   SPDR = token;
   for (uint16_t i = 0; i < 512; i += 2) {
diff --git a/Marlin/src/HAL/shared/HAL_MinSerial.h b/Marlin/src/HAL/shared/HAL_MinSerial.h
index 04643c1ab..3089b8aa0 100644
--- a/Marlin/src/HAL/shared/HAL_MinSerial.h
+++ b/Marlin/src/HAL/shared/HAL_MinSerial.h
@@ -42,7 +42,7 @@ struct MinSerial {
       HAL_min_serial_out(ch);
   }
   // Send String through UART
-  static void TX(const char* s) { while (*s) TX(*s++); }
+  static void TX(const char *s) { while (*s) TX(*s++); }
   // Send a digit through UART
   static void TXDigit(uint32_t d) {
     if (d < 10) TX((char)(d+'0'));
diff --git a/Marlin/src/HAL/shared/HAL_SPI.h b/Marlin/src/HAL/shared/HAL_SPI.h
index 59af55480..6611f9ec4 100644
--- a/Marlin/src/HAL/shared/HAL_SPI.h
+++ b/Marlin/src/HAL/shared/HAL_SPI.h
@@ -71,10 +71,10 @@ void spiSend(uint8_t b);
 uint8_t spiRec();
 
 // Read from SPI into buffer
-void spiRead(uint8_t* buf, uint16_t nbyte);
+void spiRead(uint8_t *buf, uint16_t nbyte);
 
 // Write token and then write from 512 byte buffer to SPI (for SD card)
-void spiSendBlock(uint8_t token, const uint8_t* buf);
+void spiSendBlock(uint8_t token, const uint8_t *buf);
 
 // Begin SPI transaction, set clock, bit order, data mode
 void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode);
@@ -87,7 +87,7 @@ void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode);
 void spiSend(uint32_t chan, byte b);
 
 // Write buffer to specified SPI channel
-void spiSend(uint32_t chan, const uint8_t* buf, size_t n);
+void spiSend(uint32_t chan, const uint8_t *buf, size_t n);
 
 // Read single byte from specified SPI channel
 uint8_t spiRec(uint32_t chan);
diff --git a/Marlin/src/HAL/shared/backtrace/backtrace.cpp b/Marlin/src/HAL/shared/backtrace/backtrace.cpp
index 8320f4750..e4ae502a8 100644
--- a/Marlin/src/HAL/shared/backtrace/backtrace.cpp
+++ b/Marlin/src/HAL/shared/backtrace/backtrace.cpp
@@ -44,7 +44,7 @@ static bool UnwReportOut(void* ctx, const UnwReport* bte) {
 }
 
 #ifdef UNW_DEBUG
-  void UnwPrintf(const char* format, ...) {
+  void UnwPrintf(const char *format, ...) {
     char dest[256];
     va_list argptr;
     va_start(argptr, format);
diff --git a/Marlin/src/HAL/shared/eeprom_api.h b/Marlin/src/HAL/shared/eeprom_api.h
index 6445f7a4a..1f3863993 100644
--- a/Marlin/src/HAL/shared/eeprom_api.h
+++ b/Marlin/src/HAL/shared/eeprom_api.h
@@ -45,11 +45,11 @@ public:
 
   // Read one or more bytes of data and update the CRC
   // Return 'true' on read error
-  static bool read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing=true);
+  static bool read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing=true);
 
   // Write one or more bytes of data
   // Return 'true' on write error
-  static inline bool write_data(const int pos, const uint8_t* value, const size_t size=sizeof(uint8_t)) {
+  static inline bool write_data(const int pos, const uint8_t *value, const size_t size=sizeof(uint8_t)) {
     int data_pos = pos;
     uint16_t crc = 0;
     return write_data(data_pos, value, size, &crc);
@@ -61,7 +61,7 @@ public:
 
   // Read one or more bytes of data
   // Return 'true' on read error
-  static inline bool read_data(const int pos, uint8_t* value, const size_t size=1) {
+  static inline bool read_data(const int pos, uint8_t *value, const size_t size=1) {
     int data_pos = pos;
     uint16_t crc = 0;
     return read_data(data_pos, value, size, &crc);
diff --git a/Marlin/src/HAL/shared/eeprom_if_spi.cpp b/Marlin/src/HAL/shared/eeprom_if_spi.cpp
index e162f6fed..6aa6e0909 100644
--- a/Marlin/src/HAL/shared/eeprom_if_spi.cpp
+++ b/Marlin/src/HAL/shared/eeprom_if_spi.cpp
@@ -55,7 +55,7 @@ static void _eeprom_begin(uint8_t * const pos, const uint8_t cmd) {
                                   // Leave the Bus in-use
 }
 
-uint8_t eeprom_read_byte(uint8_t* pos) {
+uint8_t eeprom_read_byte(uint8_t *pos) {
   _eeprom_begin(pos, CMD_READ);   // Set read location and begin transmission
 
   const uint8_t v = spiRec(SPI_CHAN_EEPROM1); // After READ a value sits on the Bus
diff --git a/Marlin/src/core/macros.h b/Marlin/src/core/macros.h
index d7043ba52..f90099378 100644
--- a/Marlin/src/core/macros.h
+++ b/Marlin/src/core/macros.h
@@ -362,13 +362,13 @@
       return *str == '/' ? true : (*str ? containsSlash(str + 1) : false);
     }
     // Find the last position of the slash
-    constexpr const char* findLastSlashPos(const char* str) {
+    constexpr const char* findLastSlashPos(const char *str) {
       return *str == '/' ? (str + 1) : findLastSlashPos(str - 1);
     }
     // Compile-time evaluation of the last part of a file path
     // Typically used to shorten the path to file in compiled strings
     // CompileTimeString::baseName(__FILE__) returns "macros.h" and not /path/to/Marlin/src/core/macros.h
-    constexpr const char* baseName(const char* str) {
+    constexpr const char* baseName(const char *str) {
       return containsSlash(str) ? findLastSlashPos(findStringEnd(str)) : str;
     }
   }
diff --git a/Marlin/src/core/serial_base.h b/Marlin/src/core/serial_base.h
index f8fe3a181..78721c6f1 100644
--- a/Marlin/src/core/serial_base.h
+++ b/Marlin/src/core/serial_base.h
@@ -108,9 +108,9 @@ struct SerialBase {
   void flushTX()                    { CALL_IF_EXISTS(void, static_cast<Child*>(this), flushTX); }
 
   // Glue code here
-  FORCE_INLINE void write(const char* str)                    { while (*str) write(*str++); }
-  FORCE_INLINE void write(const uint8_t* buffer, size_t size) { while (size--) write(*buffer++); }
-  FORCE_INLINE void print(const char* str)                    { write(str); }
+  FORCE_INLINE void write(const char *str)                    { while (*str) write(*str++); }
+  FORCE_INLINE void write(const uint8_t *buffer, size_t size) { while (size--) write(*buffer++); }
+  FORCE_INLINE void print(const char *str)                    { write(str); }
   // No default argument to avoid ambiguity
   NO_INLINE void print(char c, PrintBase base)                { printNumber((signed long)c, (uint8_t)base); }
   NO_INLINE void print(unsigned char c, PrintBase base)       { printNumber((unsigned long)c, (uint8_t)base); }
diff --git a/Marlin/src/feature/binary_stream.h b/Marlin/src/feature/binary_stream.h
index b5d68196a..9eb151b27 100644
--- a/Marlin/src/feature/binary_stream.h
+++ b/Marlin/src/feature/binary_stream.h
@@ -51,10 +51,10 @@ class SDFileTransferProtocol  {
 private:
   struct Packet {
     struct [[gnu::packed]] Open {
-      static bool validate(char* buffer, size_t length) {
+      static bool validate(char *buffer, size_t length) {
         return (length > sizeof(Open) && buffer[length - 1] == '\0');
       }
-      static Open& decode(char* buffer) {
+      static Open& decode(char *buffer) {
         data = &buffer[2];
         return *reinterpret_cast<Open*>(buffer);
       }
@@ -67,7 +67,7 @@ private:
     };
   };
 
-  static bool file_open(char* filename) {
+  static bool file_open(char *filename) {
     if (!dummy_transfer) {
       card.mount();
       card.openFileWrite(filename);
@@ -79,7 +79,7 @@ private:
     return true;
   }
 
-  static bool file_write(char* buffer, const size_t length) {
+  static bool file_write(char *buffer, const size_t length) {
     #if ENABLED(BINARY_STREAM_COMPRESSION)
       if (compression) {
         size_t total_processed = 0, processed_count = 0;
@@ -150,7 +150,7 @@ public:
     }
   }
 
-  static void process(uint8_t packet_type, char* buffer, const uint16_t length) {
+  static void process(uint8_t packet_type, char *buffer, const uint16_t length) {
     transfer_timeout = millis() + TIMEOUT;
     switch (static_cast<FileTransfer>(packet_type)) {
       case FileTransfer::QUERY:
diff --git a/Marlin/src/feature/meatpack.cpp b/Marlin/src/feature/meatpack.cpp
index 0742f8235..6803a0de7 100644
--- a/Marlin/src/feature/meatpack.cpp
+++ b/Marlin/src/feature/meatpack.cpp
@@ -205,7 +205,7 @@ void MeatPack::handle_rx_char(const uint8_t c, const serial_index_t serial_ind)
   handle_rx_char_inner(c);                // Other characters are passed on for MeatPack decoding
 }
 
-uint8_t MeatPack::get_result_char(char* const __restrict out) {
+uint8_t MeatPack::get_result_char(char * const __restrict out) {
   uint8_t res = 0;
   if (char_out_count) {
     res = char_out_count;
diff --git a/Marlin/src/feature/meatpack.h b/Marlin/src/feature/meatpack.h
index 80f4570e0..2c4c4686d 100644
--- a/Marlin/src/feature/meatpack.h
+++ b/Marlin/src/feature/meatpack.h
@@ -109,7 +109,7 @@ public:
    * @param out [in] Output pointer for unpacked/processed data.
    * @return Number of characters returned. Range from 0 to 2.
    */
-  uint8_t get_result_char(char* const __restrict out);
+  uint8_t get_result_char(char * const __restrict out);
 
   void reset_state();
   void report_state();
diff --git a/Marlin/src/feature/mmu/mmu2.cpp b/Marlin/src/feature/mmu/mmu2.cpp
index d4238400c..c1c34f8ee 100644
--- a/Marlin/src/feature/mmu/mmu2.cpp
+++ b/Marlin/src/feature/mmu/mmu2.cpp
@@ -362,7 +362,7 @@ bool MMU2::rx_start() {
 /**
  * Check if the data received ends with the given string.
  */
-bool MMU2::rx_str_P(const char* str) {
+bool MMU2::rx_str_P(const char *str) {
   uint8_t i = strlen(rx_buffer);
 
   while (MMU2_SERIAL.available()) {
@@ -394,7 +394,7 @@ bool MMU2::rx_str_P(const char* str) {
 /**
  * Transfer data to MMU, no argument
  */
-void MMU2::tx_str_P(const char* str) {
+void MMU2::tx_str_P(const char *str) {
   clear_rx_buffer();
   uint8_t len = strlen_P(str);
   LOOP_L_N(i, len) MMU2_SERIAL.write(pgm_read_byte(str++));
@@ -404,7 +404,7 @@ void MMU2::tx_str_P(const char* str) {
 /**
  * Transfer data to MMU, single argument
  */
-void MMU2::tx_printf_P(const char* format, int argument = -1) {
+void MMU2::tx_printf_P(const char *format, int argument = -1) {
   clear_rx_buffer();
   uint8_t len = sprintf_P(tx_buffer, format, argument);
   LOOP_L_N(i, len) MMU2_SERIAL.write(tx_buffer[i]);
@@ -414,7 +414,7 @@ void MMU2::tx_printf_P(const char* format, int argument = -1) {
 /**
  * Transfer data to MMU, two arguments
  */
-void MMU2::tx_printf_P(const char* format, int argument1, int argument2) {
+void MMU2::tx_printf_P(const char *format, int argument1, int argument2) {
   clear_rx_buffer();
   uint8_t len = sprintf_P(tx_buffer, format, argument1, argument2);
   LOOP_L_N(i, len) MMU2_SERIAL.write(tx_buffer[i]);
@@ -511,7 +511,7 @@ static void mmu2_not_responding() {
    * Tx Same as T?, except nozzle doesn't have to be preheated. Tc must be placed after extruder nozzle is preheated to finish filament load.
    * Tc Load to nozzle after filament was prepared by Tx and extruder nozzle is already heated.
    */
-  void MMU2::tool_change(const char* special) {
+  void MMU2::tool_change(const char *special) {
       if (!enabled) return;
 
       set_runout_valid(false);
@@ -598,7 +598,7 @@ static void mmu2_not_responding() {
    * Tx Same as T?, except nozzle doesn't have to be preheated. Tc must be placed after extruder nozzle is preheated to finish filament load.
    * Tc Load to nozzle after filament was prepared by Tx and extruder nozzle is already heated.
    */
-  void MMU2::tool_change(const char* special) {
+  void MMU2::tool_change(const char *special) {
     if (!enabled) return;
 
     set_runout_valid(false);
@@ -692,7 +692,7 @@ static void mmu2_not_responding() {
    * Tx Same as T?, except nozzle doesn't have to be preheated. Tc must be placed after extruder nozzle is preheated to finish filament load.
    * Tc Load to nozzle after filament was prepared by Tx and extruder nozzle is already heated.
    */
-  void MMU2::tool_change(const char* special) {
+  void MMU2::tool_change(const char *special) {
     if (!enabled) return;
 
     set_runout_valid(false);
diff --git a/Marlin/src/feature/mmu/mmu2.h b/Marlin/src/feature/mmu/mmu2.h
index 4326989a7..079a6ef79 100644
--- a/Marlin/src/feature/mmu/mmu2.h
+++ b/Marlin/src/feature/mmu/mmu2.h
@@ -45,7 +45,7 @@ public:
   static void reset();
   static void mmu_loop();
   static void tool_change(const uint8_t index);
-  static void tool_change(const char* special);
+  static void tool_change(const char *special);
   static uint8_t get_current_tool();
   static void set_filament_type(const uint8_t index, const uint8_t type);
 
@@ -56,10 +56,10 @@ public:
   static bool eject_filament(const uint8_t index, const bool recover);
 
 private:
-  static bool rx_str_P(const char* str);
-  static void tx_str_P(const char* str);
-  static void tx_printf_P(const char* format, const int argument);
-  static void tx_printf_P(const char* format, const int argument1, const int argument2);
+  static bool rx_str_P(const char *str);
+  static void tx_str_P(const char *str);
+  static void tx_printf_P(const char *format, const int argument);
+  static void tx_printf_P(const char *format, const int argument1, const int argument2);
   static void clear_rx_buffer();
 
   static bool rx_ok();
diff --git a/Marlin/src/feature/runout.h b/Marlin/src/feature/runout.h
index 34ae67899..0c35ef665 100644
--- a/Marlin/src/feature/runout.h
+++ b/Marlin/src/feature/runout.h
@@ -106,7 +106,7 @@ class TFilamentMonitor : public FilamentMonitorBase {
 
     // Handle a block completion. RunoutResponseDelayed uses this to
     // add up the length of filament moved while the filament is out.
-    static inline void block_completed(const block_t* const b) {
+    static inline void block_completed(const block_t * const b) {
       if (enabled) {
         response.block_completed(b);
         sensor.block_completed(b);
@@ -273,7 +273,7 @@ class FilamentSensorBase {
       }
 
     public:
-      static inline void block_completed(const block_t* const b) {
+      static inline void block_completed(const block_t * const b) {
         // If the sensor wheel has moved since the last call to
         // this method reset the runout counter for the extruder.
         if (TEST(motion_detected, b->extruder))
@@ -307,7 +307,7 @@ class FilamentSensorBase {
       }
 
     public:
-      static inline void block_completed(const block_t* const) {}
+      static inline void block_completed(const block_t * const) {}
 
       static inline void run() {
         LOOP_L_N(s, NUM_RUNOUT_SENSORS) {
@@ -368,7 +368,7 @@ class FilamentSensorBase {
         runout_mm_countdown[extruder] = runout_distance_mm;
       }
 
-      static inline void block_completed(const block_t* const b) {
+      static inline void block_completed(const block_t * const b) {
         if (b->steps.x || b->steps.y || b->steps.z || did_pause_print) { // Allow pause purge move to re-trigger runout state
           // Only trigger on extrusion with XYZ movement to allow filament change and retract/recover.
           const uint8_t e = b->extruder;
@@ -403,7 +403,7 @@ class FilamentSensorBase {
         return runout_flags;
       }
 
-      static inline void block_completed(const block_t* const) { }
+      static inline void block_completed(const block_t * const) { }
 
       static inline void filament_present(const uint8_t extruder) {
         runout_count[extruder] = runout_threshold;
diff --git a/Marlin/src/gcode/queue.cpp b/Marlin/src/gcode/queue.cpp
index 7845b01ad..a79909917 100644
--- a/Marlin/src/gcode/queue.cpp
+++ b/Marlin/src/gcode/queue.cpp
@@ -99,7 +99,7 @@ void GCodeQueue::RingBuffer::commit_command(bool skip_ok
  * Return true if the command was successfully added.
  * Return false for a full buffer, or if the 'command' is a comment.
  */
-bool GCodeQueue::RingBuffer::enqueue(const char* cmd, bool skip_ok/*=true*/
+bool GCodeQueue::RingBuffer::enqueue(const char *cmd, bool skip_ok/*=true*/
   #if HAS_MULTI_SERIAL
     , serial_index_t serial_ind/*=-1*/
   #endif
@@ -118,7 +118,7 @@ bool GCodeQueue::RingBuffer::enqueue(const char* cmd, bool skip_ok/*=true*/
  * Enqueue with Serial Echo
  * Return true if the command was consumed
  */
-bool GCodeQueue::enqueue_one(const char* cmd) {
+bool GCodeQueue::enqueue_one(const char *cmd) {
   //SERIAL_ECHOLNPAIR("enqueue_one(\"", cmd, "\")");
 
   if (*cmd == 0 || ISEOL(*cmd)) return true;
@@ -187,7 +187,7 @@ bool GCodeQueue::process_injected_command() {
  * Enqueue and return only when commands are actually enqueued.
  * Never call this from a G-code handler!
  */
-void GCodeQueue::enqueue_one_now(const char* cmd) { while (!enqueue_one(cmd)) idle(); }
+void GCodeQueue::enqueue_one_now(const char *cmd) { while (!enqueue_one(cmd)) idle(); }
 
 /**
  * Attempt to enqueue a single G-code command
diff --git a/Marlin/src/gcode/queue.h b/Marlin/src/gcode/queue.h
index 4d3ccb364..5df4a0104 100644
--- a/Marlin/src/gcode/queue.h
+++ b/Marlin/src/gcode/queue.h
@@ -85,7 +85,7 @@ public:
       #endif
     );
 
-    bool enqueue(const char* cmd, bool skip_ok = true
+    bool enqueue(const char *cmd, bool skip_ok = true
       #if HAS_MULTI_SERIAL
         , serial_index_t serial_ind = serial_index_t()
       #endif
@@ -143,7 +143,7 @@ public:
   /**
    * Enqueue and return only when commands are actually enqueued
    */
-  static void enqueue_one_now(const char* cmd);
+  static void enqueue_one_now(const char *cmd);
 
   /**
    * Attempt to enqueue a single G-code command
@@ -219,7 +219,7 @@ private:
    * Enqueue with Serial Echo
    * Return true on success
    */
-  static bool enqueue_one(const char* cmd);
+  static bool enqueue_one(const char *cmd);
 
   static void gcode_line_error(PGM_P const err, const serial_index_t serial_ind);
 
diff --git a/Marlin/src/lcd/HD44780/marlinui_HD44780.cpp b/Marlin/src/lcd/HD44780/marlinui_HD44780.cpp
index 683c1c088..e18ed7273 100644
--- a/Marlin/src/lcd/HD44780/marlinui_HD44780.cpp
+++ b/Marlin/src/lcd/HD44780/marlinui_HD44780.cpp
@@ -1076,7 +1076,7 @@ void MarlinUI::draw_status_screen() {
   }
 
   // Draw a menu item with a (potentially) editable value
-  void MenuEditItemBase::draw(const bool sel, const uint8_t row, PGM_P const pstr, const char* const inStr, const bool pgm) {
+  void MenuEditItemBase::draw(const bool sel, const uint8_t row, PGM_P const pstr, const char * const inStr, const bool pgm) {
     const uint8_t vlen = inStr ? (pgm ? utf8_strlen_P(inStr) : utf8_strlen(inStr)) : 0;
     lcd_put_wchar(0, row, sel ? LCD_STR_ARROW_RIGHT[0] : ' ');
     uint8_t n = lcd_put_u8str_ind_P(pstr, itemIndex, itemString, LCD_WIDTH - 2 - vlen);
@@ -1088,7 +1088,7 @@ void MarlinUI::draw_status_screen() {
   }
 
   // Low-level draw_edit_screen can be used to draw an edit screen from anyplace
-  void MenuEditItemBase::draw_edit_screen(PGM_P const pstr, const char* const value/*=nullptr*/) {
+  void MenuEditItemBase::draw_edit_screen(PGM_P const pstr, const char * const value/*=nullptr*/) {
     ui.encoder_direction_normal();
     uint8_t n = lcd_put_u8str_ind_P(0, 1, pstr, itemIndex, itemString, LCD_WIDTH - 1);
     if (value) {
diff --git a/Marlin/src/lcd/TFTGLCD/marlinui_TFTGLCD.cpp b/Marlin/src/lcd/TFTGLCD/marlinui_TFTGLCD.cpp
index e645a7661..6976bfed2 100644
--- a/Marlin/src/lcd/TFTGLCD/marlinui_TFTGLCD.cpp
+++ b/Marlin/src/lcd/TFTGLCD/marlinui_TFTGLCD.cpp
@@ -835,7 +835,7 @@ void MarlinUI::draw_status_screen() {
   }
 
   // Draw a menu item with a (potentially) editable value
-  void MenuEditItemBase::draw(const bool sel, const uint8_t row, PGM_P const pstr, const char* const data, const bool pgm) {
+  void MenuEditItemBase::draw(const bool sel, const uint8_t row, PGM_P const pstr, const char * const data, const bool pgm) {
     if (!PanelDetected) return;
     const uint8_t vlen = data ? (pgm ? utf8_strlen_P(data) : utf8_strlen(data)) : 0;
     lcd.setCursor(0, row);
@@ -851,7 +851,7 @@ void MarlinUI::draw_status_screen() {
 
   // Low-level draw_edit_screen can be used to draw an edit screen from anyplace
   // This line moves to the last line of the screen for UBL plot screen on the panel side
-  void MenuEditItemBase::draw_edit_screen(PGM_P const pstr, const char* const value/*=nullptr*/) {
+  void MenuEditItemBase::draw_edit_screen(PGM_P const pstr, const char * const value/*=nullptr*/) {
     if (!PanelDetected) return;
     ui.encoder_direction_normal();
     const uint8_t y = TERN0(AUTO_BED_LEVELING_UBL, ui.external_control) ? LCD_HEIGHT - 1 : MIDDLE_Y;
diff --git a/Marlin/src/lcd/dogm/marlinui_DOGM.cpp b/Marlin/src/lcd/dogm/marlinui_DOGM.cpp
index a3b14d860..c2d2cf43a 100644
--- a/Marlin/src/lcd/dogm/marlinui_DOGM.cpp
+++ b/Marlin/src/lcd/dogm/marlinui_DOGM.cpp
@@ -385,7 +385,7 @@ void MarlinUI::clear_lcd() { } // Automatically cleared by Picture Loop
   }
 
   // Draw a menu item with an editable value
-  void MenuEditItemBase::draw(const bool sel, const uint8_t row, PGM_P const pstr, const char* const inStr, const bool pgm) {
+  void MenuEditItemBase::draw(const bool sel, const uint8_t row, PGM_P const pstr, const char * const inStr, const bool pgm) {
     if (mark_as_selected(row, sel)) {
       const uint8_t vallen = (pgm ? utf8_strlen_P(inStr) : utf8_strlen((char*)inStr)),
                     pixelwidth = (pgm ? uxg_GetUtf8StrPixelWidthP(u8g.getU8g(), inStr) : uxg_GetUtf8StrPixelWidth(u8g.getU8g(), (char*)inStr));
@@ -400,7 +400,7 @@ void MarlinUI::clear_lcd() { } // Automatically cleared by Picture Loop
     }
   }
 
-  void MenuEditItemBase::draw_edit_screen(PGM_P const pstr, const char* const value/*=nullptr*/) {
+  void MenuEditItemBase::draw_edit_screen(PGM_P const pstr, const char * const value/*=nullptr*/) {
     ui.encoder_direction_normal();
 
     const u8g_uint_t labellen = utf8_strlen_P(pstr), vallen = utf8_strlen(value);
diff --git a/Marlin/src/lcd/dogm/u8g_dev_tft_upscale_from_128x64.cpp b/Marlin/src/lcd/dogm/u8g_dev_tft_upscale_from_128x64.cpp
index 7f88df7bc..3842611fd 100644
--- a/Marlin/src/lcd/dogm/u8g_dev_tft_upscale_from_128x64.cpp
+++ b/Marlin/src/lcd/dogm/u8g_dev_tft_upscale_from_128x64.cpp
@@ -311,7 +311,7 @@ static void setWindow(u8g_t *u8g, u8g_dev_t *dev, uint16_t Xmin, uint16_t Ymin,
 
 // Used to fill RGB565 (16bits) background
 inline void memset2(const void *ptr, uint16_t fill, size_t cnt) {
-  uint16_t* wptr = (uint16_t*)ptr;
+  uint16_t *wptr = (uint16_t*)ptr;
   for (size_t i = 0; i < cnt; i += 2) { *wptr = fill; wptr++; }
 }
 
@@ -346,7 +346,7 @@ uint8_t u8g_dev_tft_320x240_upscale_from_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, u
 
   #if HAS_LCD_IO
     static uint16_t bufferA[WIDTH * sq(GRAPHICAL_TFT_UPSCALE)], bufferB[WIDTH * sq(GRAPHICAL_TFT_UPSCALE)];
-    uint16_t* buffer = &bufferA[0];
+    uint16_t *buffer = &bufferA[0];
   #else
     uint16_t buffer[WIDTH * GRAPHICAL_TFT_UPSCALE]; // 16-bit RGB 565 pixel line buffer
   #endif
@@ -404,7 +404,7 @@ uint8_t u8g_dev_tft_320x240_upscale_from_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, u
 
           tftio.WriteSequence(buffer, COUNT(bufferA));
         #else
-          uint8_t* bufptr = (uint8_t*) buffer;
+          uint8_t *bufptr = (uint8_t*) buffer;
           for (uint8_t i = GRAPHICAL_TFT_UPSCALE; i--;) {
             LOOP_S_L_N(n, 0, GRAPHICAL_TFT_UPSCALE * 2) {
               u8g_WriteSequence(u8g, dev, WIDTH, &bufptr[WIDTH * n]);
diff --git a/Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.cpp b/Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.cpp
index 8542424d7..1e19bf85e 100644
--- a/Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.cpp
+++ b/Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.cpp
@@ -148,8 +148,8 @@ uint8_t u8g_dev_rrd_st7920_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, vo
     case U8G_DEV_MSG_STOP: break;
 
     case U8G_DEV_MSG_PAGE_NEXT: {
-      uint8_t* ptr;
-      u8g_pb_t* pb = (u8g_pb_t*)(dev->dev_mem);
+      uint8_t *ptr;
+      u8g_pb_t *pb = (u8g_pb_t*)(dev->dev_mem);
       y = pb->p.page_y0;
       ptr = (uint8_t*)pb->buf;
 
diff --git a/Marlin/src/lcd/extui/lib/dgus/DGUSScreenHandler.cpp b/Marlin/src/lcd/extui/lib/dgus/DGUSScreenHandler.cpp
index a585ef670..b4e876ce4 100644
--- a/Marlin/src/lcd/extui/lib/dgus/DGUSScreenHandler.cpp
+++ b/Marlin/src/lcd/extui/lib/dgus/DGUSScreenHandler.cpp
@@ -62,7 +62,7 @@ void (*DGUSScreenHandler::confirm_action_cb)() = nullptr;
   filament_data_t filament_data;
 #endif
 
-void DGUSScreenHandler::sendinfoscreen(const char* line1, const char* line2, const char* line3, const char* line4, bool l1inflash, bool l2inflash, bool l3inflash, bool l4inflash) {
+void DGUSScreenHandler::sendinfoscreen(const char *line1, const char *line2, const char *line3, const char *line4, bool l1inflash, bool l2inflash, bool l3inflash, bool l4inflash) {
   DGUS_VP_Variable ramcopy;
   if (populate_VPVar(VP_MSGSTR1, &ramcopy)) {
     ramcopy.memadr = (void*) line1;
@@ -82,7 +82,7 @@ void DGUSScreenHandler::sendinfoscreen(const char* line1, const char* line2, con
   }
 }
 
-void DGUSScreenHandler::HandleUserConfirmationPopUp(uint16_t VP, const char* line1, const char* line2, const char* line3, const char* line4, bool l1, bool l2, bool l3, bool l4) {
+void DGUSScreenHandler::HandleUserConfirmationPopUp(uint16_t VP, const char *line1, const char *line2, const char *line3, const char *line4, bool l1, bool l2, bool l3, bool l4) {
   if (current_screen == DGUSLCD_SCREEN_CONFIRM) // Already showing a pop up, so we need to cancel that first.
     PopToOldScreen();
 
diff --git a/Marlin/src/lcd/extui/lib/dgus/fysetc/DGUSScreenHandler.h b/Marlin/src/lcd/extui/lib/dgus/fysetc/DGUSScreenHandler.h
index 28ab952e5..24965597a 100644
--- a/Marlin/src/lcd/extui/lib/dgus/fysetc/DGUSScreenHandler.h
+++ b/Marlin/src/lcd/extui/lib/dgus/fysetc/DGUSScreenHandler.h
@@ -37,12 +37,12 @@ public:
 
   // Send all 4 strings that are displayed on the infoscreen, confirmation screen and kill screen
   // The bools specifing whether the strings are in RAM or FLASH.
-  static void sendinfoscreen(const char* line1, const char* line2, const char* line3, const char* line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash);
+  static void sendinfoscreen(const char *line1, const char *line2, const char *line3, const char *line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash);
 
-  static void HandleUserConfirmationPopUp(uint16_t ConfirmVP, const char* line1, const char* line2, const char* line3, const char* line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash);
+  static void HandleUserConfirmationPopUp(uint16_t ConfirmVP, const char *line1, const char *line2, const char *line3, const char *line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash);
 
   // "M117" Message -- msg is a RAM ptr.
-  static void setstatusmessage(const char* msg);
+  static void setstatusmessage(const char *msg);
   // The same for messages from Flash
   static void setstatusmessagePGM(PGM_P const msg);
   // Callback for VP "Display wants to change screen on idle printer"
diff --git a/Marlin/src/lcd/extui/lib/dgus/hiprecy/DGUSScreenHandler.h b/Marlin/src/lcd/extui/lib/dgus/hiprecy/DGUSScreenHandler.h
index 28ab952e5..24965597a 100644
--- a/Marlin/src/lcd/extui/lib/dgus/hiprecy/DGUSScreenHandler.h
+++ b/Marlin/src/lcd/extui/lib/dgus/hiprecy/DGUSScreenHandler.h
@@ -37,12 +37,12 @@ public:
 
   // Send all 4 strings that are displayed on the infoscreen, confirmation screen and kill screen
   // The bools specifing whether the strings are in RAM or FLASH.
-  static void sendinfoscreen(const char* line1, const char* line2, const char* line3, const char* line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash);
+  static void sendinfoscreen(const char *line1, const char *line2, const char *line3, const char *line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash);
 
-  static void HandleUserConfirmationPopUp(uint16_t ConfirmVP, const char* line1, const char* line2, const char* line3, const char* line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash);
+  static void HandleUserConfirmationPopUp(uint16_t ConfirmVP, const char *line1, const char *line2, const char *line3, const char *line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash);
 
   // "M117" Message -- msg is a RAM ptr.
-  static void setstatusmessage(const char* msg);
+  static void setstatusmessage(const char *msg);
   // The same for messages from Flash
   static void setstatusmessagePGM(PGM_P const msg);
   // Callback for VP "Display wants to change screen on idle printer"
diff --git a/Marlin/src/lcd/extui/lib/dgus/mks/DGUSScreenHandler.cpp b/Marlin/src/lcd/extui/lib/dgus/mks/DGUSScreenHandler.cpp
index 0efb70b68..d956ec4c5 100644
--- a/Marlin/src/lcd/extui/lib/dgus/mks/DGUSScreenHandler.cpp
+++ b/Marlin/src/lcd/extui/lib/dgus/mks/DGUSScreenHandler.cpp
@@ -61,14 +61,14 @@ uint8_t DGUSLanguageSwitch = 0; // Switch language for MKS DGUS
 uint32_t swap32(const uint32_t value) { return (value & 0x000000FFU) << 24U | (value & 0x0000FF00U) << 8U | (value & 0x00FF0000U) >> 8U | (value & 0xFF000000U) >> 24U; }
 
 #if 0
-void DGUSScreenHandler::sendinfoscreen_ch_mks(const uint16_t* line1, const uint16_t* line2, const uint16_t* line3, const uint16_t* line4) {
+void DGUSScreenHandler::sendinfoscreen_ch_mks(const uint16_t *line1, const uint16_t *line2, const uint16_t *line3, const uint16_t *line4) {
   dgusdisplay.WriteVariable(VP_MSGSTR1, line1, 32, true);
   dgusdisplay.WriteVariable(VP_MSGSTR2, line2, 32, true);
   dgusdisplay.WriteVariable(VP_MSGSTR3, line3, 32, true);
   dgusdisplay.WriteVariable(VP_MSGSTR4, line4, 32, true);
 }
 
-void DGUSScreenHandler::sendinfoscreen_en_mks(const char* line1, const char* line2, const char* line3, const char* line4) {
+void DGUSScreenHandler::sendinfoscreen_en_mks(const char *line1, const char *line2, const char *line3, const char *line4) {
   dgusdisplay.WriteVariable(VP_MSGSTR1, line1, 32, true);
   dgusdisplay.WriteVariable(VP_MSGSTR2, line2, 32, true);
   dgusdisplay.WriteVariable(VP_MSGSTR3, line3, 32, true);
diff --git a/Marlin/src/lcd/extui/lib/dgus/mks/DGUSScreenHandler.h b/Marlin/src/lcd/extui/lib/dgus/mks/DGUSScreenHandler.h
index bfec3c457..dc656326a 100644
--- a/Marlin/src/lcd/extui/lib/dgus/mks/DGUSScreenHandler.h
+++ b/Marlin/src/lcd/extui/lib/dgus/mks/DGUSScreenHandler.h
@@ -37,18 +37,18 @@ public:
 
   // Send all 4 strings that are displayed on the infoscreen, confirmation screen and kill screen
   // The bools specifing whether the strings are in RAM or FLASH.
-  static void sendinfoscreen(const char* line1, const char* line2, const char* line3, const char* line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash);
+  static void sendinfoscreen(const char *line1, const char *line2, const char *line3, const char *line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash);
 
-  static void HandleUserConfirmationPopUp(uint16_t ConfirmVP, const char* line1, const char* line2, const char* line3, const char* line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash);
+  static void HandleUserConfirmationPopUp(uint16_t ConfirmVP, const char *line1, const char *line2, const char *line3, const char *line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash);
 
   #if 0
-  static void sendinfoscreen_ch_mks(const uint16_t* line1, const uint16_t* line2, const uint16_t* line3, const uint16_t* line4);
-  static void sendinfoscreen_en_mks(const char* line1, const char* line2, const char* line3, const char* line4) ;
+  static void sendinfoscreen_ch_mks(const uint16_t *line1, const uint16_t *line2, const uint16_t *line3, const uint16_t *line4);
+  static void sendinfoscreen_en_mks(const char *line1, const char *line2, const char *line3, const char *line4) ;
   static void sendinfoscreen_mks(const void* line1, const void* line2, const void* line3, const void* line4,uint16_t language);
   #endif
 
   // "M117" Message -- msg is a RAM ptr.
-  static void setstatusmessage(const char* msg);
+  static void setstatusmessage(const char *msg);
   // The same for messages from Flash
   static void setstatusmessagePGM(PGM_P const msg);
   // Callback for VP "Display wants to change screen on idle printer"
diff --git a/Marlin/src/lcd/extui/lib/dgus/origin/DGUSScreenHandler.h b/Marlin/src/lcd/extui/lib/dgus/origin/DGUSScreenHandler.h
index 28ab952e5..24965597a 100644
--- a/Marlin/src/lcd/extui/lib/dgus/origin/DGUSScreenHandler.h
+++ b/Marlin/src/lcd/extui/lib/dgus/origin/DGUSScreenHandler.h
@@ -37,12 +37,12 @@ public:
 
   // Send all 4 strings that are displayed on the infoscreen, confirmation screen and kill screen
   // The bools specifing whether the strings are in RAM or FLASH.
-  static void sendinfoscreen(const char* line1, const char* line2, const char* line3, const char* line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash);
+  static void sendinfoscreen(const char *line1, const char *line2, const char *line3, const char *line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash);
 
-  static void HandleUserConfirmationPopUp(uint16_t ConfirmVP, const char* line1, const char* line2, const char* line3, const char* line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash);
+  static void HandleUserConfirmationPopUp(uint16_t ConfirmVP, const char *line1, const char *line2, const char *line3, const char *line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash);
 
   // "M117" Message -- msg is a RAM ptr.
-  static void setstatusmessage(const char* msg);
+  static void setstatusmessage(const char *msg);
   // The same for messages from Flash
   static void setstatusmessagePGM(PGM_P const msg);
   // Callback for VP "Display wants to change screen on idle printer"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/archim2-flash/media_file_reader.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/archim2-flash/media_file_reader.cpp
index 9868492d8..ab6057970 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/archim2-flash/media_file_reader.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/archim2-flash/media_file_reader.cpp
@@ -26,7 +26,7 @@
   #include "media_file_reader.h"
 
   #if ENABLED(SDSUPPORT)
-    bool MediaFileReader::open(const char* filename) {
+    bool MediaFileReader::open(const char *filename) {
       card.init(SD_SPI_SPEED, SDSS);
       volume.init(&card);
       root.openRoot(&volume);
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/archim2-flash/media_file_reader.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/archim2-flash/media_file_reader.h
index be393a952..d9edea838 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/archim2-flash/media_file_reader.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/archim2-flash/media_file_reader.h
@@ -38,7 +38,7 @@ class MediaFileReader {
     #endif
 
   public:
-    bool open(const char* filename);
+    bool open(const char *filename);
     int16_t read(void *buff, size_t bytes);
     uint32_t size();
     void rewind();
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/spi.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/spi.cpp
index 006cbe872..30f778e9f 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/spi.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/spi.cpp
@@ -103,12 +103,12 @@ namespace FTDI {
   #endif
 
   void SPI::spi_read_bulk(void *data, uint16_t len) {
-    uint8_t* p = (uint8_t *)data;
+    uint8_t *p = (uint8_t *)data;
     while (len--) *p++ = spi_recv();
   }
 
   bool SPI::spi_verify_bulk(const void *data, uint16_t len) {
-    const uint8_t* p = (const uint8_t *)data;
+    const uint8_t *p = (const uint8_t *)data;
     while (len--) if (*p++ != spi_recv()) return false;
     return true;
   }
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/spi.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/spi.h
index e3a23d768..7adf7e9c5 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/spi.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/spi.h
@@ -116,14 +116,14 @@ namespace FTDI {
 
     template<bulk_write_op byte_op>
     void spi_write_bulk(const void *data, uint16_t len, uint8_t padding) {
-      const uint8_t* p = (const uint8_t *)data;
+      const uint8_t *p = (const uint8_t *)data;
       while (len--)     spi_send(byte_op(p++));
       while (padding--) spi_send(0);
     }
 
     template<bulk_write_op byte_op>
     void spi_write_bulk(const void *data, uint16_t len) {
-      const uint8_t* p = (const uint8_t *)data;
+      const uint8_t *p = (const uint8_t *)data;
       while (len--) spi_send(byte_op(p++));
     }
 
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/sound_list.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/sound_list.h
index 20df15a91..2ddab1b81 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/sound_list.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/sound_list.h
@@ -24,7 +24,7 @@
 class SoundList {
   private:
     static PROGMEM const struct list_t {
-      const char *const PROGMEM name;
+      const char * const PROGMEM name;
       const FTDI::SoundPlayer::sound_t* data;
     } list[];
   public:
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/sound_player.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/sound_player.cpp
index f48448eb8..47bf79e46 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/sound_player.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/sound_player.cpp
@@ -62,7 +62,7 @@ namespace FTDI {
     timer.start();
   }
 
-  void SoundPlayer::play(const sound_t* seq, play_mode_t mode) {
+  void SoundPlayer::play(const sound_t *seq, play_mode_t mode) {
     sequence = seq;
     wait     = 250; // Adding this delay causes the note to not be clipped, not sure why.
     timer.start();
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/sound_player.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/sound_player.h
index fcfe70bd7..3ba39b8c5 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/sound_player.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/sound_player.h
@@ -55,7 +55,7 @@ namespace FTDI {
       static void play(effect_t effect, note_t note = NOTE_C4);
       static bool is_sound_playing();
 
-      void play(const sound_t* seq, play_mode_t mode = PLAY_SYNCHRONOUS);
+      void play(const sound_t *seq, play_mode_t mode = PLAY_SYNCHRONOUS);
       void play_tone(const uint16_t frequency_hz, const uint16_t duration_ms);
       bool has_more_notes() {return sequence != 0;};
 
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/text_ellipsis.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/text_ellipsis.cpp
index 5fc89f1fa..6a58dd2e4 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/text_ellipsis.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/text_ellipsis.cpp
@@ -47,7 +47,7 @@ namespace FTDI {
           break;
       }
     #else
-      for (char* c = str; *c; c++) {
+      for (char *c = str; *c; c++) {
         lineWidth += fm.get_char_width(*c);
         if (lineWidth + ellipsisWidth < w)
           breakPoint = c;
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/marlin_events.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/marlin_events.cpp
index 902ede025..d8abfcd29 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/marlin_events.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/marlin_events.cpp
@@ -71,7 +71,7 @@ namespace ExtUI {
     AlertDialogBox::showError(F("Unable to read media."));
   }
 
-  void onStatusChanged(const char* lcd_msg) {
+  void onStatusChanged(const char *lcd_msg) {
     StatusScreen::setStatusMessage(lcd_msg);
   }
 
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_printing_dialog_box.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_printing_dialog_box.cpp
index 7f81d49a2..a812f0f3d 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_printing_dialog_box.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_printing_dialog_box.cpp
@@ -34,7 +34,7 @@ using namespace Theme;
 #define GRID_COLS 2
 #define GRID_ROWS 9
 
-void BioPrintingDialogBox::draw_status_message(draw_mode_t what, const char* message) {
+void BioPrintingDialogBox::draw_status_message(draw_mode_t what, const char *message) {
   if (what & BACKGROUND) {
     CommandProcessor cmd;
     cmd.cmd(COLOR_RGB(bg_text_enabled))
@@ -113,7 +113,7 @@ void BioPrintingDialogBox::setStatusMessage(progmem_str message) {
   setStatusMessage(buff);
 }
 
-void BioPrintingDialogBox::setStatusMessage(const char* message) {
+void BioPrintingDialogBox::setStatusMessage(const char *message) {
   CommandProcessor cmd;
   cmd.cmd(CMD_DLSTART)
      .cmd(CLEAR_COLOR_RGB(bg_color))
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/confirm_user_request_alert_box.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/confirm_user_request_alert_box.cpp
index e3892217a..d51401505 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/confirm_user_request_alert_box.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/confirm_user_request_alert_box.cpp
@@ -56,7 +56,7 @@ void ConfirmUserRequestAlertBox::onIdle() {
   }
 }
 
-void ConfirmUserRequestAlertBox::show(const char* msg) {
+void ConfirmUserRequestAlertBox::show(const char *msg) {
   drawMessage(msg);
   storeBackground();
   screen_data.AlertDialogBox.isError = false;
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/files_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/files_screen.cpp
index c8febfd7d..f9057ae88 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/files_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/files_screen.cpp
@@ -76,7 +76,7 @@ uint16_t FilesScreen::getFileForTag(uint8_t tag) {
   #define GRID_ROWS (files_per_page + header_h + footer_h)
 #endif
 
-void FilesScreen::drawFileButton(const char* filename, uint8_t tag, bool is_dir, bool is_highlighted) {
+void FilesScreen::drawFileButton(const char *filename, uint8_t tag, bool is_dir, bool is_highlighted) {
   const uint8_t line = getLineForTag(tag)+1;
   CommandProcessor cmd;
   cmd.tag(tag);
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/files_screen.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/files_screen.h
index a4fb37cc1..06ae88a45 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/files_screen.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/files_screen.h
@@ -60,7 +60,7 @@ class FilesScreen : public BaseScreen, public CachedScreen<FILES_SCREEN_CACHE, F
     inline static const char *getSelectedLongFilename()  {return getSelectedFilename(true);}
     static const char *getSelectedFilename(bool longName);
 
-    static void drawFileButton(const char* filename, uint8_t tag, bool is_dir, bool is_highlighted);
+    static void drawFileButton(const char *filename, uint8_t tag, bool is_dir, bool is_highlighted);
     static void drawFileList();
     static void drawHeader();
     static void drawFooter();
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/status_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/status_screen.cpp
index 956795c97..c027e8314 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/status_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/status_screen.cpp
@@ -324,7 +324,7 @@ void StatusScreen::draw_interaction_buttons(draw_mode_t what) {
   #undef  GRID_COLS
 }
 
-void StatusScreen::draw_status_message(draw_mode_t what, const char* message) {
+void StatusScreen::draw_status_message(draw_mode_t what, const char *message) {
   #define GRID_COLS 1
 
   #if ENABLED(TOUCH_UI_PORTRAIT)
@@ -350,7 +350,7 @@ void StatusScreen::setStatusMessage(progmem_str message) {
   setStatusMessage((const char *) buff);
 }
 
-void StatusScreen::setStatusMessage(const char* message) {
+void StatusScreen::setStatusMessage(const char *message) {
   if (CommandProcessor::is_processing()) {
     #if ENABLED(TOUCH_UI_DEBUG)
       SERIAL_ECHO_MSG("Cannot update status message, command processor busy");
diff --git a/Marlin/src/lcd/extui/lib/mks_ui/SPIFlashStorage.cpp b/Marlin/src/lcd/extui/lib/mks_ui/SPIFlashStorage.cpp
index e1c46811f..3ad1ac2bb 100644
--- a/Marlin/src/lcd/extui/lib/mks_ui/SPIFlashStorage.cpp
+++ b/Marlin/src/lcd/extui/lib/mks_ui/SPIFlashStorage.cpp
@@ -167,7 +167,7 @@ void SPIFlashStorage::endWrite() {
   #endif
 }
 
-void SPIFlashStorage::savePage(uint8_t* buffer) {
+void SPIFlashStorage::savePage(uint8_t *buffer) {
   W25QXX.SPI_FLASH_BufferWrite(buffer, m_startAddress + (SPI_FLASH_PageSize * m_currentPage), SPI_FLASH_PageSize);
   // Test env
   // char fname[256];
@@ -177,7 +177,7 @@ void SPIFlashStorage::savePage(uint8_t* buffer) {
   // fclose(fp);
 }
 
-void SPIFlashStorage::loadPage(uint8_t* buffer) {
+void SPIFlashStorage::loadPage(uint8_t *buffer) {
   W25QXX.SPI_FLASH_BufferRead(buffer, m_startAddress + (SPI_FLASH_PageSize * m_currentPage), SPI_FLASH_PageSize);
   // Test env
   // char fname[256];
@@ -256,7 +256,7 @@ void SPIFlashStorage::readPage() {
   #endif
 }
 
-uint16_t SPIFlashStorage::inData(uint8_t* data, uint16_t size) {
+uint16_t SPIFlashStorage::inData(uint8_t *data, uint16_t size) {
   // Don't write more than we can
   NOMORE(size, pageDataFree());
   memcpy(m_pageData + m_pageDataUsed, data, size);
@@ -264,7 +264,7 @@ uint16_t SPIFlashStorage::inData(uint8_t* data, uint16_t size) {
   return size;
 }
 
-void SPIFlashStorage::writeData(uint8_t* data, uint16_t size) {
+void SPIFlashStorage::writeData(uint8_t *data, uint16_t size) {
   // Flush a page if needed
   if (pageDataFree() == 0) flushPage();
 
@@ -289,7 +289,7 @@ void SPIFlashStorage::beginRead(uint32_t startAddress) {
   #endif
 }
 
-uint16_t SPIFlashStorage::outData(uint8_t* data, uint16_t size) {
+uint16_t SPIFlashStorage::outData(uint8_t *data, uint16_t size) {
   // Don't read more than we have
   NOMORE(size, pageDataFree());
   memcpy(data, m_pageData + m_pageDataUsed, size);
@@ -297,7 +297,7 @@ uint16_t SPIFlashStorage::outData(uint8_t* data, uint16_t size) {
   return size;
 }
 
-void SPIFlashStorage::readData(uint8_t* data, uint16_t size) {
+void SPIFlashStorage::readData(uint8_t *data, uint16_t size) {
   // Read a page if needed
   if (pageDataFree() == 0) readPage();
 
diff --git a/Marlin/src/lcd/extui/lib/mks_ui/SPIFlashStorage.h b/Marlin/src/lcd/extui/lib/mks_ui/SPIFlashStorage.h
index 98c8067bd..113814d6c 100644
--- a/Marlin/src/lcd/extui/lib/mks_ui/SPIFlashStorage.h
+++ b/Marlin/src/lcd/extui/lib/mks_ui/SPIFlashStorage.h
@@ -77,21 +77,21 @@ public:
   // Write operation
   static void beginWrite(uint32_t startAddress);
   static void endWrite();
-  static void writeData(uint8_t* data, uint16_t size);
+  static void writeData(uint8_t *data, uint16_t size);
 
   // Read operation
   static void beginRead(uint32_t startAddress);
-  static void readData(uint8_t* data, uint16_t size);
+  static void readData(uint8_t *data, uint16_t size);
 
   static uint32_t getCurrentPage() { return m_currentPage; }
 
 private:
   static void flushPage();
-  static void savePage(uint8_t* buffer);
-  static void loadPage(uint8_t* buffer);
+  static void savePage(uint8_t *buffer);
+  static void loadPage(uint8_t *buffer);
   static void readPage();
-  static uint16_t inData(uint8_t* data, uint16_t size);
-  static uint16_t outData(uint8_t* data, uint16_t size);
+  static uint16_t inData(uint8_t *data, uint16_t size);
+  static uint16_t outData(uint8_t *data, uint16_t size);
 
   static uint8_t m_pageData[SPI_FLASH_PageSize];
   static uint32_t m_currentPage;
diff --git a/Marlin/src/lcd/extui/lib/mks_ui/draw_ui.cpp b/Marlin/src/lcd/extui/lib/mks_ui/draw_ui.cpp
index 8d560a19a..e65ba788f 100644
--- a/Marlin/src/lcd/extui/lib/mks_ui/draw_ui.cpp
+++ b/Marlin/src/lcd/extui/lib/mks_ui/draw_ui.cpp
@@ -649,7 +649,7 @@ char *creat_title_text() {
       if (gPicturePreviewStart <= 0) {
         while (1) {
           uint32_t br  = card.read(public_buf, 400);
-          uint32_t* p1 = (uint32_t *)strstr((char *)public_buf, ";gimage:");
+          uint32_t *p1 = (uint32_t *)strstr((char *)public_buf, ";gimage:");
           if (p1) {
             gPicturePreviewStart += (uint32_t)p1 - (uint32_t)((uint32_t *)(&public_buf[0]));
             break;
@@ -1173,7 +1173,7 @@ void lv_btn_set_style_both(lv_obj_t *btn, lv_style_t *style) {
 }
 
 // Create a screen
-lv_obj_t* lv_screen_create(DISP_STATE newScreenType, const char* title) {
+lv_obj_t* lv_screen_create(DISP_STATE newScreenType, const char *title) {
   lv_obj_t *scr = lv_obj_create(nullptr, nullptr);
   lv_obj_set_style(scr, &tft_style_scr);
   lv_scr_load(scr);
@@ -1348,19 +1348,19 @@ lv_obj_t* lv_screen_menu_item(lv_obj_t *par, const char *text, lv_coord_t x, lv_
 }
 
 lv_obj_t* lv_screen_menu_item_1_edit(lv_obj_t *par, const char *text, lv_coord_t x, lv_coord_t y, lv_event_cb_t cb, const int id, const int index, const char *editValue) {
-  lv_obj_t* btn = lv_screen_menu_item(par, text, x, y, cb, -1, index, false);
-  lv_obj_t* btnValue = lv_btn_create(par, PARA_UI_VALUE_POS_X, y + PARA_UI_VALUE_V, PARA_UI_VALUE_BTN_X_SIZE, PARA_UI_VALUE_BTN_Y_SIZE, cb, id);
-  lv_obj_t* labelValue = lv_label_create_empty(btnValue);
+  lv_obj_t *btn = lv_screen_menu_item(par, text, x, y, cb, -1, index, false);
+  lv_obj_t *btnValue = lv_btn_create(par, PARA_UI_VALUE_POS_X, y + PARA_UI_VALUE_V, PARA_UI_VALUE_BTN_X_SIZE, PARA_UI_VALUE_BTN_Y_SIZE, cb, id);
+  lv_obj_t *labelValue = lv_label_create_empty(btnValue);
   lv_label_set_text(labelValue, editValue);
   lv_obj_align(labelValue, btnValue, LV_ALIGN_CENTER, 0, 0);
   return btn;
 }
 
 lv_obj_t* lv_screen_menu_item_2_edit(lv_obj_t *par, const char *text, lv_coord_t x, lv_coord_t y, lv_event_cb_t cb, const int id, const int index, const char *editValue, const int idEdit2, const char *editValue2) {
-  lv_obj_t* btn = lv_screen_menu_item(par, text, x, y, cb, -1, index, false);
+  lv_obj_t *btn = lv_screen_menu_item(par, text, x, y, cb, -1, index, false);
 
-  lv_obj_t* btnValue = lv_btn_create(par, PARA_UI_VALUE_POS_X_2, y + PARA_UI_VALUE_V_2, PARA_UI_VALUE_BTN_X_SIZE, PARA_UI_VALUE_BTN_Y_SIZE, cb, idEdit2);
-  lv_obj_t* labelValue = lv_label_create_empty(btnValue);
+  lv_obj_t *btnValue = lv_btn_create(par, PARA_UI_VALUE_POS_X_2, y + PARA_UI_VALUE_V_2, PARA_UI_VALUE_BTN_X_SIZE, PARA_UI_VALUE_BTN_Y_SIZE, cb, idEdit2);
+  lv_obj_t *labelValue = lv_label_create_empty(btnValue);
   lv_label_set_text(labelValue, editValue2);
   lv_obj_align(labelValue, btnValue, LV_ALIGN_CENTER, 0, 0);
 
@@ -1374,8 +1374,8 @@ lv_obj_t* lv_screen_menu_item_2_edit(lv_obj_t *par, const char *text, lv_coord_t
 
 lv_obj_t* lv_screen_menu_item_onoff(lv_obj_t *par, const char *text, lv_coord_t x, lv_coord_t y, lv_event_cb_t cb, const int id, const int index, const bool curValue) {
   lv_screen_menu_item(par, text, x, y, cb, -1, index, false);
-  lv_obj_t* btnValue = lv_imgbtn_create(par, curValue ? "F:/bmp_enable.bin" : "F:/bmp_disable.bin", PARA_UI_STATE_POS_X, y + PARA_UI_STATE_V, cb, id);
-  lv_obj_t* labelValue = lv_label_create_empty(btnValue);
+  lv_obj_t *btnValue = lv_imgbtn_create(par, curValue ? "F:/bmp_enable.bin" : "F:/bmp_disable.bin", PARA_UI_STATE_POS_X, y + PARA_UI_STATE_V, cb, id);
+  lv_obj_t *labelValue = lv_label_create_empty(btnValue);
   lv_label_set_text(labelValue, curValue ? machine_menu.enable : machine_menu.disable);
   lv_obj_align(labelValue, btnValue, LV_ALIGN_CENTER, 0, 0);
   return btnValue;
diff --git a/Marlin/src/lcd/extui/lib/mks_ui/draw_ui.h b/Marlin/src/lcd/extui/lib/mks_ui/draw_ui.h
index 0690e5957..f4a6d71ea 100644
--- a/Marlin/src/lcd/extui/lib/mks_ui/draw_ui.h
+++ b/Marlin/src/lcd/extui/lib/mks_ui/draw_ui.h
@@ -482,7 +482,7 @@ void lv_btn_use_label_style(lv_obj_t *btn);
 void lv_btn_set_style_both(lv_obj_t *btn, lv_style_t *style);
 
 // Create a screen
-lv_obj_t* lv_screen_create(DISP_STATE newScreenType, const char* title = nullptr);
+lv_obj_t* lv_screen_create(DISP_STATE newScreenType, const char *title = nullptr);
 
 // Create an empty label
 lv_obj_t* lv_label_create_empty(lv_obj_t *par);
diff --git a/Marlin/src/lcd/extui/lib/mks_ui/pic_manager.cpp b/Marlin/src/lcd/extui/lib/mks_ui/pic_manager.cpp
index 8b96587fe..36f276c21 100644
--- a/Marlin/src/lcd/extui/lib/mks_ui/pic_manager.cpp
+++ b/Marlin/src/lcd/extui/lib/mks_ui/pic_manager.cpp
@@ -370,7 +370,7 @@ uint32_t Pic_Info_Write(uint8_t *P_name, uint32_t P_size) {
 
 #if ENABLED(SDSUPPORT)
 
-  static void dosName2LongName(const char dosName[11], char* longName) {
+  static void dosName2LongName(const char dosName[11], char *longName) {
     uint8_t j = 0;
     LOOP_L_N(i, 11) {
       if (i == 8) longName[j++] = '.';
@@ -380,7 +380,7 @@ uint32_t Pic_Info_Write(uint8_t *P_name, uint32_t P_size) {
     longName[j] = '\0';
   }
 
-  static int8_t arrayFindStr(const char arr[][LONG_FILENAME_LENGTH], uint8_t arraySize, const char* str) {
+  static int8_t arrayFindStr(const char arr[][LONG_FILENAME_LENGTH], uint8_t arraySize, const char *str) {
     for (uint8_t a = 0; a < arraySize; a++) {
       if (strcasecmp(arr[a], str) == 0)
         return a;
diff --git a/Marlin/src/lcd/extui/lib/mks_ui/wifi_module.cpp b/Marlin/src/lcd/extui/lib/mks_ui/wifi_module.cpp
index 44aa2300e..a74ecd2f1 100644
--- a/Marlin/src/lcd/extui/lib/mks_ui/wifi_module.cpp
+++ b/Marlin/src/lcd/extui/lib/mks_ui/wifi_module.cpp
@@ -53,7 +53,7 @@
 #define WIFI_IO1_SET()      WRITE(WIFI_IO1_PIN, HIGH);
 #define WIFI_IO1_RESET()    WRITE(WIFI_IO1_PIN, LOW);
 
-extern uint8_t Explore_Disk (char* path , uint8_t recu_level);
+extern uint8_t Explore_Disk (char *path , uint8_t recu_level);
 
 extern uint8_t commands_in_queue;
 extern uint8_t sel_id;
@@ -566,7 +566,7 @@ static int cut_msg_head(uint8_t *msg, uint16_t msgLen, uint16_t cutLen) {
   return msgLen - cutLen;
 }
 
-uint8_t Explore_Disk(char* path , uint8_t recu_level) {
+uint8_t Explore_Disk(char *path , uint8_t recu_level) {
   char tmp[200];
   char Fstream[200];
 
diff --git a/Marlin/src/lcd/extui/lib/nextion/nextion_tft.cpp b/Marlin/src/lcd/extui/lib/nextion/nextion_tft.cpp
index 12a7bc7cc..e2fa6bc51 100644
--- a/Marlin/src/lcd/extui/lib/nextion/nextion_tft.cpp
+++ b/Marlin/src/lcd/extui/lib/nextion/nextion_tft.cpp
@@ -101,14 +101,14 @@ void NextionTFT::PrintFinished() {
   SEND_TXT_END("page printfinished");
 }
 
-void NextionTFT::ConfirmationRequest(const char *const msg) {
+void NextionTFT::ConfirmationRequest(const char * const msg) {
   SEND_VALasTXT("tmppage.M117", msg);
   #if NEXDEBUG(N_MARLIN)
     DEBUG_ECHOLNPAIR("ConfirmationRequest() ", msg, " printer_state:", printer_state);
   #endif
 }
 
-void NextionTFT::StatusChange(const char *const msg) {
+void NextionTFT::StatusChange(const char * const msg) {
   #if NEXDEBUG(N_MARLIN)
     DEBUG_ECHOLNPAIR("StatusChange() ", msg, "\nprinter_state:", printer_state);
   #endif
diff --git a/Marlin/src/lcd/extui/malyan_lcd.cpp b/Marlin/src/lcd/extui/malyan_lcd.cpp
index 601b2fd33..d684ebd01 100644
--- a/Marlin/src/lcd/extui/malyan_lcd.cpp
+++ b/Marlin/src/lcd/extui/malyan_lcd.cpp
@@ -118,7 +118,7 @@ void set_lcd_error_P(PGM_P const error, PGM_P const component=nullptr) {
  *
  * the command portion begins after the :
  */
-void process_lcd_c_command(const char* command) {
+void process_lcd_c_command(const char *command) {
   const int target_val = command[1] ? atoi(command + 1) : -1;
   if (target_val < 0) {
     DEBUG_ECHOLNPAIR("UNKNOWN C COMMAND ", command);
@@ -153,7 +153,7 @@ void process_lcd_c_command(const char* command) {
  * time remaining (HH:MM:SS). The UI can't handle displaying a second hotend,
  * but the stock firmware always sends it, and it's always zero.
  */
-void process_lcd_eb_command(const char* command) {
+void process_lcd_eb_command(const char *command) {
   char elapsed_buffer[10];
   static uint8_t iteration = 0;
   duration_t elapsed;
@@ -203,12 +203,12 @@ void process_lcd_eb_command(const char* command) {
  * X, Y, Z, A (extruder)
  */
 template<typename T>
-void j_move_axis(const char* command, const T axis) {
+void j_move_axis(const char *command, const T axis) {
   const float dist = atof(command + 1) / 10.0;
   ExtUI::setAxisPosition_mm(ExtUI::getAxisPosition_mm(axis) + dist, axis);
 };
 
-void process_lcd_j_command(const char* command) {
+void process_lcd_j_command(const char *command) {
   switch (command[0]) {
     case 'E': break;
     case 'A': j_move_axis<ExtUI::extruder_t>(command, ExtUI::extruder_t::E0); break;
@@ -241,7 +241,7 @@ void process_lcd_j_command(const char* command) {
  * T:-2537.4 E:0
  * Note only the curly brace stuff matters.
  */
-void process_lcd_p_command(const char* command) {
+void process_lcd_p_command(const char *command) {
 
   switch (command[0]) {
     case 'P':
@@ -301,7 +301,7 @@ void process_lcd_p_command(const char* command) {
  * {FILE:fcupdate.flg}
  * {SYS:OK}
  */
-void process_lcd_s_command(const char* command) {
+void process_lcd_s_command(const char *command) {
   switch (command[0]) {
     case 'I': {
       // temperature information
@@ -348,7 +348,7 @@ void process_lcd_s_command(const char* command) {
  * Currently {E:0} is not handled. Its function is unknown,
  * but it occurs during the temp window after a sys build.
  */
-void process_lcd_command(const char* command) {
+void process_lcd_command(const char *command) {
   const char *current = command;
 
   byte command_code = *current++;
diff --git a/Marlin/src/lcd/lcdprint.h b/Marlin/src/lcd/lcdprint.h
index 90ffa14ad..fe856535b 100644
--- a/Marlin/src/lcd/lcdprint.h
+++ b/Marlin/src/lcd/lcdprint.h
@@ -161,7 +161,7 @@ inline lcd_uint_t lcd_put_u8str_ind_P(const lcd_uint_t col, const lcd_uint_t row
   return lcd_put_u8str_ind_P(pstr, ind, inStr, maxlen);
 }
 
-inline int lcd_put_u8str(const char* str) { return lcd_put_u8str_max(str, PIXEL_LEN_NOLIMIT); }
+inline int lcd_put_u8str(const char *str) { return lcd_put_u8str_max(str, PIXEL_LEN_NOLIMIT); }
 inline int lcd_put_u8str(const lcd_uint_t col, const lcd_uint_t row, PGM_P const str) {
   lcd_moveto(col, row);
   return lcd_put_u8str(str);
diff --git a/Marlin/src/lcd/marlinui.h b/Marlin/src/lcd/marlinui.h
index f85771f56..57e6fc26e 100644
--- a/Marlin/src/lcd/marlinui.h
+++ b/Marlin/src/lcd/marlinui.h
@@ -292,7 +292,7 @@ public:
 
     static bool has_status();
     static void reset_status(const bool no_welcome=false);
-    static void set_status(const char* const message, const bool persist=false);
+    static void set_status(const char * const message, const bool persist=false);
     static void set_status_P(PGM_P const message, const int8_t level=0);
     static void status_printf_P(const uint8_t level, PGM_P const fmt, ...);
     static void set_alert_status_P(PGM_P const message);
@@ -300,7 +300,7 @@ public:
   #else
     static constexpr bool has_status() { return false; }
     static inline void reset_status(const bool=false) {}
-    static void set_status(const char* message, const bool=false);
+    static void set_status(const char *message, const bool=false);
     static void set_status_P(PGM_P message, const int8_t=0);
     static void status_printf_P(const uint8_t, PGM_P message, ...);
     static inline void set_alert_status_P(PGM_P const) {}
diff --git a/Marlin/src/lcd/menu/menu.h b/Marlin/src/lcd/menu/menu.h
index de11ee3a5..cbef9b50c 100644
--- a/Marlin/src/lcd/menu/menu.h
+++ b/Marlin/src/lcd/menu/menu.h
@@ -172,14 +172,14 @@ class MenuEditItemBase : public MenuItemBase {
   public:
     // Implemented for HD44780 and DOGM
     // Draw the current item at specified row with edit data
-    static void draw(const bool sel, const uint8_t row, PGM_P const pstr, const char* const inStr, const bool pgm=false);
+    static void draw(const bool sel, const uint8_t row, PGM_P const pstr, const char * const inStr, const bool pgm=false);
 
     // Implemented for HD44780 and DOGM
     // This low-level method is good to draw from anywhere
-    static void draw_edit_screen(PGM_P const pstr, const char* const value);
+    static void draw_edit_screen(PGM_P const pstr, const char * const value);
 
     // This method is for the current menu item
-    static inline void draw_edit_screen(const char* const value) { draw_edit_screen(editLabel, value); }
+    static inline void draw_edit_screen(const char * const value) { draw_edit_screen(editLabel, value); }
 };
 
 #if ENABLED(SDSUPPORT)
diff --git a/Marlin/src/lcd/tft/ui_320x240.cpp b/Marlin/src/lcd/tft/ui_320x240.cpp
index 37a44f51b..793ee6084 100644
--- a/Marlin/src/lcd/tft/ui_320x240.cpp
+++ b/Marlin/src/lcd/tft/ui_320x240.cpp
@@ -326,7 +326,7 @@ void MarlinUI::draw_status_screen() {
 }
 
 // Low-level draw_edit_screen can be used to draw an edit screen from anyplace
-void MenuEditItemBase::draw_edit_screen(PGM_P const pstr, const char* const value/*=nullptr*/) {
+void MenuEditItemBase::draw_edit_screen(PGM_P const pstr, const char * const value/*=nullptr*/) {
   ui.encoder_direction_normal();
   TERN_(TOUCH_SCREEN, touch.clear());
 
diff --git a/Marlin/src/lcd/tft/ui_480x320.cpp b/Marlin/src/lcd/tft/ui_480x320.cpp
index 81e4603ea..a8979d0ca 100644
--- a/Marlin/src/lcd/tft/ui_480x320.cpp
+++ b/Marlin/src/lcd/tft/ui_480x320.cpp
@@ -326,7 +326,7 @@ void MarlinUI::draw_status_screen() {
 }
 
 // Low-level draw_edit_screen can be used to draw an edit screen from anyplace
-void MenuEditItemBase::draw_edit_screen(PGM_P const pstr, const char* const value/*=nullptr*/) {
+void MenuEditItemBase::draw_edit_screen(PGM_P const pstr, const char * const value/*=nullptr*/) {
   ui.encoder_direction_normal();
   TERN_(TOUCH_SCREEN, touch.clear());
 
@@ -779,7 +779,7 @@ static void disable_steppers() {
   queue.inject_P(PSTR("M84"));
 }
 
-static void drawBtn(int x, int y, const char* label, intptr_t data, MarlinImage img, uint16_t bgColor, bool enabled = true) {
+static void drawBtn(int x, int y, const char *label, intptr_t data, MarlinImage img, uint16_t bgColor, bool enabled = true) {
   uint16_t width = Images[imgBtn52Rounded].width;
   uint16_t height = Images[imgBtn52Rounded].height;
 
diff --git a/Marlin/src/lcd/tft/ui_common.cpp b/Marlin/src/lcd/tft/ui_common.cpp
index 842fc3909..7c053e7be 100644
--- a/Marlin/src/lcd/tft/ui_common.cpp
+++ b/Marlin/src/lcd/tft/ui_common.cpp
@@ -131,7 +131,7 @@ void MenuItemBase::_draw(const bool sel, const uint8_t row, PGM_P const pstr, co
 }
 
 // Draw a menu item with a (potentially) editable value
-void MenuEditItemBase::draw(const bool sel, const uint8_t row, PGM_P const pstr, const char* const data, const bool pgm) {
+void MenuEditItemBase::draw(const bool sel, const uint8_t row, PGM_P const pstr, const char * const data, const bool pgm) {
   menu_item(row, sel);
 
   tft_string.set(pstr, itemIndex, itemString);
diff --git a/Marlin/src/libs/W25Qxx.cpp b/Marlin/src/libs/W25Qxx.cpp
index 0eb40a144..fd7804cb2 100644
--- a/Marlin/src/libs/W25Qxx.cpp
+++ b/Marlin/src/libs/W25Qxx.cpp
@@ -106,7 +106,7 @@ uint8_t W25QXXFlash::spi_flash_read_write_byte(uint8_t data) {
  *
  * @details Uses DMA
  */
-void W25QXXFlash::spi_flash_Read(uint8_t* buf, uint16_t nbyte) {
+void W25QXXFlash::spi_flash_Read(uint8_t *buf, uint16_t nbyte) {
   mySPI.dmaTransfer(0, const_cast<uint8_t*>(buf), nbyte);
 }
 
@@ -127,7 +127,7 @@ void W25QXXFlash::spi_flash_Send(uint8_t b) { mySPI.transfer(b); }
  *
  * @details Use DMA
  */
-void W25QXXFlash::spi_flash_SendBlock(uint8_t token, const uint8_t* buf) {
+void W25QXXFlash::spi_flash_SendBlock(uint8_t token, const uint8_t *buf) {
   mySPI.transfer(token);
   mySPI.dmaSend(const_cast<uint8_t*>(buf), 512);
 }
@@ -257,7 +257,7 @@ void W25QXXFlash::SPI_FLASH_BulkErase(void) {
 * Output         : None
 * Return         : None
 *******************************************************************************/
-void W25QXXFlash::SPI_FLASH_PageWrite(uint8_t* pBuffer, uint32_t WriteAddr, uint16_t NumByteToWrite) {
+void W25QXXFlash::SPI_FLASH_PageWrite(uint8_t *pBuffer, uint32_t WriteAddr, uint16_t NumByteToWrite) {
   // Enable the write access to the FLASH
   SPI_FLASH_WriteEnable();
 
@@ -300,7 +300,7 @@ void W25QXXFlash::SPI_FLASH_PageWrite(uint8_t* pBuffer, uint32_t WriteAddr, uint
 * Output         : None
 * Return         : None
 *******************************************************************************/
-void W25QXXFlash::SPI_FLASH_BufferWrite(uint8_t* pBuffer, uint32_t WriteAddr, uint16_t NumByteToWrite) {
+void W25QXXFlash::SPI_FLASH_BufferWrite(uint8_t *pBuffer, uint32_t WriteAddr, uint16_t NumByteToWrite) {
   uint8_t NumOfPage = 0, NumOfSingle = 0, Addr = 0, count = 0, temp = 0;
 
   Addr = WriteAddr % SPI_FLASH_PageSize;
@@ -364,7 +364,7 @@ void W25QXXFlash::SPI_FLASH_BufferWrite(uint8_t* pBuffer, uint32_t WriteAddr, ui
 * Output         : None
 * Return         : None
 *******************************************************************************/
-void W25QXXFlash::SPI_FLASH_BufferRead(uint8_t* pBuffer, uint32_t ReadAddr, uint16_t NumByteToRead) {
+void W25QXXFlash::SPI_FLASH_BufferRead(uint8_t *pBuffer, uint32_t ReadAddr, uint16_t NumByteToRead) {
   // Select the FLASH: Chip Select low
   W25QXX_CS_L;
 
diff --git a/Marlin/src/libs/W25Qxx.h b/Marlin/src/libs/W25Qxx.h
index eddae6b1f..1133af2e7 100644
--- a/Marlin/src/libs/W25Qxx.h
+++ b/Marlin/src/libs/W25Qxx.h
@@ -57,18 +57,18 @@ public:
   void init(uint8_t spiRate);
   static uint8_t spi_flash_Rec();
   static uint8_t spi_flash_read_write_byte(uint8_t data);
-  static void spi_flash_Read(uint8_t* buf, uint16_t nbyte);
+  static void spi_flash_Read(uint8_t *buf, uint16_t nbyte);
   static void spi_flash_Send(uint8_t b);
-  static void spi_flash_SendBlock(uint8_t token, const uint8_t* buf);
+  static void spi_flash_SendBlock(uint8_t token, const uint8_t *buf);
   static uint16_t W25QXX_ReadID(void);
   static void SPI_FLASH_WriteEnable(void);
   static void SPI_FLASH_WaitForWriteEnd(void);
   static void SPI_FLASH_SectorErase(uint32_t SectorAddr);
   static void SPI_FLASH_BlockErase(uint32_t BlockAddr);
   static void SPI_FLASH_BulkErase(void);
-  static void SPI_FLASH_PageWrite(uint8_t* pBuffer, uint32_t WriteAddr, uint16_t NumByteToWrite);
-  static void SPI_FLASH_BufferWrite(uint8_t* pBuffer, uint32_t WriteAddr, uint16_t NumByteToWrite);
-  static void SPI_FLASH_BufferRead(uint8_t* pBuffer, uint32_t ReadAddr, uint16_t NumByteToRead);
+  static void SPI_FLASH_PageWrite(uint8_t *pBuffer, uint32_t WriteAddr, uint16_t NumByteToWrite);
+  static void SPI_FLASH_BufferWrite(uint8_t *pBuffer, uint32_t WriteAddr, uint16_t NumByteToWrite);
+  static void SPI_FLASH_BufferRead(uint8_t *pBuffer, uint32_t ReadAddr, uint16_t NumByteToRead);
 };
 
 extern W25QXXFlash W25QXX;
diff --git a/Marlin/src/libs/softspi.h b/Marlin/src/libs/softspi.h
index 5d48f9fd8..fb02de865 100644
--- a/Marlin/src/libs/softspi.h
+++ b/Marlin/src/libs/softspi.h
@@ -715,7 +715,7 @@ class SoftSPI {
 
   FORCE_INLINE bool MODE_CPHA(uint8_t mode) { return bool(mode & 1); }
   FORCE_INLINE bool MODE_CPOL(uint8_t mode) { return bool(mode & 2); }
-  FORCE_INLINE void receiveBit(uint8_t bit, uint8_t* data) {
+  FORCE_INLINE void receiveBit(uint8_t bit, uint8_t *data) {
     if (MODE_CPHA(Mode)) fastDigitalWrite(SckPin, !MODE_CPOL(Mode));
     nop;
     nop;
@@ -734,7 +734,7 @@ class SoftSPI {
     if (!MODE_CPHA(Mode)) fastDigitalWrite(SckPin, MODE_CPOL(Mode));
   }
 
-  FORCE_INLINE void transferBit(uint8_t bit, uint8_t* rxData, uint8_t txData) {
+  FORCE_INLINE void transferBit(uint8_t bit, uint8_t *rxData, uint8_t txData) {
     if (MODE_CPHA(Mode)) fastDigitalWrite(SckPin, !MODE_CPOL(Mode));
     fastDigitalWrite(MosiPin, txData & _BV(bit));
     fastDigitalWrite(SckPin,
diff --git a/Marlin/src/module/planner.cpp b/Marlin/src/module/planner.cpp
index b20d1e273..832d6e316 100644
--- a/Marlin/src/module/planner.cpp
+++ b/Marlin/src/module/planner.cpp
@@ -381,7 +381,7 @@ void Planner::init() {
               r9 = (d >> 8) & 0xFF,
               r10 = (d >> 16) & 0xFF,
               r2,r3,r4,r5,r6,r7,r11,r12,r13,r14,r15,r16,r17,r18;
-      const uint8_t* ptab = inv_tab;
+      const uint8_t *ptab = inv_tab;
 
       __asm__ __volatile__(
         // %8:%7:%6 = interval
@@ -775,7 +775,7 @@ block_t* Planner::get_current_block() {
  * is not and will not use the block while we modify it, so it is safe to
  * alter its values.
  */
-void Planner::calculate_trapezoid_for_block(block_t* const block, const float &entry_factor, const float &exit_factor) {
+void Planner::calculate_trapezoid_for_block(block_t * const block, const float &entry_factor, const float &exit_factor) {
 
   uint32_t initial_rate = CEIL(block->nominal_rate * entry_factor),
            final_rate = CEIL(block->nominal_rate * exit_factor); // (steps per second)
@@ -942,7 +942,7 @@ void Planner::calculate_trapezoid_for_block(block_t* const block, const float &e
 */
 
 // The kernel called by recalculate() when scanning the plan from last to first entry.
-void Planner::reverse_pass_kernel(block_t* const current, const block_t * const next) {
+void Planner::reverse_pass_kernel(block_t * const current, const block_t * const next) {
   if (current) {
     // If entry speed is already at the maximum entry speed, and there was no change of speed
     // in the next block, there is no need to recheck. Block is cruising and there is no need to
@@ -1039,7 +1039,7 @@ void Planner::reverse_pass() {
 }
 
 // The kernel called by recalculate() when scanning the plan from first to last entry.
-void Planner::forward_pass_kernel(const block_t* const previous, block_t* const current, const uint8_t block_index) {
+void Planner::forward_pass_kernel(const block_t * const previous, block_t * const current, const uint8_t block_index) {
   if (previous) {
     // If the previous block is an acceleration block, too short to complete the full speed
     // change, adjust the entry speed accordingly. Entry speeds have already been reset,
@@ -1440,7 +1440,7 @@ void Planner::check_axes_activity() {
 
     float high = 0.0;
     for (uint8_t b = block_buffer_tail; b != block_buffer_head; b = next_block_index(b)) {
-      block_t* block = &block_buffer[b];
+      block_t *block = &block_buffer[b];
       if (block->steps.x || block->steps.y || block->steps.z) {
         const float se = (float)block->steps.e / block->step_event_count * SQRT(block->nominal_speed_sqr); // mm/sec;
         NOLESS(high, se);
diff --git a/Marlin/src/module/planner.h b/Marlin/src/module/planner.h
index da9e202cd..768bf29e2 100644
--- a/Marlin/src/module/planner.h
+++ b/Marlin/src/module/planner.h
@@ -993,10 +993,10 @@ class Planner {
       }
     #endif
 
-    static void calculate_trapezoid_for_block(block_t* const block, const float &entry_factor, const float &exit_factor);
+    static void calculate_trapezoid_for_block(block_t * const block, const float &entry_factor, const float &exit_factor);
 
-    static void reverse_pass_kernel(block_t* const current, const block_t * const next);
-    static void forward_pass_kernel(const block_t * const previous, block_t* const current, uint8_t block_index);
+    static void reverse_pass_kernel(block_t * const current, const block_t * const next);
+    static void forward_pass_kernel(const block_t * const previous, block_t * const current, uint8_t block_index);
 
     static void reverse_pass();
     static void forward_pass();
diff --git a/Marlin/src/module/stepper.cpp b/Marlin/src/module/stepper.cpp
index 49eca7047..8c377bf7b 100644
--- a/Marlin/src/module/stepper.cpp
+++ b/Marlin/src/module/stepper.cpp
@@ -2362,7 +2362,7 @@ uint32_t Stepper::block_phase_isr() {
 // Check if the given block is busy or not - Must not be called from ISR contexts
 // The current_block could change in the middle of the read by an Stepper ISR, so
 // we must explicitly prevent that!
-bool Stepper::is_block_busy(const block_t* const block) {
+bool Stepper::is_block_busy(const block_t * const block) {
   #ifdef __AVR__
     // A SW memory barrier, to ensure GCC does not overoptimize loops
     #define sw_barrier() asm volatile("": : :"memory");
@@ -2372,7 +2372,7 @@ bool Stepper::is_block_busy(const block_t* const block) {
     // This works because stepper ISRs happen at a slower rate than
     // successive reads of a variable, so 2 consecutive reads with
     // the same value means no interrupt updated it.
-    block_t* vold, *vnew = current_block;
+    block_t *vold, *vnew = current_block;
     sw_barrier();
     do {
       vold = vnew;
diff --git a/Marlin/src/module/stepper.h b/Marlin/src/module/stepper.h
index 639a1b265..ca1781fb9 100644
--- a/Marlin/src/module/stepper.h
+++ b/Marlin/src/module/stepper.h
@@ -423,7 +423,7 @@ class Stepper {
     #endif
 
     // Check if the given block is busy or not - Must not be called from ISR contexts
-    static bool is_block_busy(const block_t* const block);
+    static bool is_block_busy(const block_t * const block);
 
     // Get the position of a stepper, in steps
     static int32_t position(const AxisEnum axis);
@@ -529,7 +529,7 @@ class Stepper {
     static void _set_position(const int32_t &a, const int32_t &b, const int32_t &c, const int32_t &e);
     FORCE_INLINE static void _set_position(const abce_long_t &spos) { _set_position(spos.a, spos.b, spos.c, spos.e); }
 
-    FORCE_INLINE static uint32_t calc_timer_interval(uint32_t step_rate, uint8_t* loops) {
+    FORCE_INLINE static uint32_t calc_timer_interval(uint32_t step_rate, uint8_t *loops) {
       uint32_t timer;
 
       // Scale the frequency, as requested by the caller
diff --git a/Marlin/src/module/stepper/trinamic.cpp b/Marlin/src/module/stepper/trinamic.cpp
index c33581d13..de3d45e4b 100644
--- a/Marlin/src/module/stepper/trinamic.cpp
+++ b/Marlin/src/module/stepper/trinamic.cpp
@@ -830,11 +830,11 @@ void reset_trinamic_drivers() {
   }
 
   constexpr bool sc_hw_done(size_t start, size_t end) { return start == end; }
-  constexpr bool sc_hw_skip(const char* port_name) { return !(*port_name); }
-  constexpr bool sc_hw_match(const char* port_name, uint32_t address, size_t start, size_t end) {
+  constexpr bool sc_hw_skip(const char *port_name) { return !(*port_name); }
+  constexpr bool sc_hw_match(const char *port_name, uint32_t address, size_t start, size_t end) {
     return !sc_hw_done(start, end) && !sc_hw_skip(port_name) && (address == sanity_tmc_hw_details[start].address && str_eq_ce(port_name, sanity_tmc_hw_details[start].port));
   }
-  constexpr int count_tmc_hw_serial_matches(const char* port_name, uint32_t address, size_t start, size_t end) {
+  constexpr int count_tmc_hw_serial_matches(const char *port_name, uint32_t address, size_t start, size_t end) {
     return sc_hw_done(start, end) ? 0 : ((sc_hw_skip(port_name) ? 0 : (sc_hw_match(port_name, address, start, end) ? 1 : 0)) + count_tmc_hw_serial_matches(port_name, address, start + 1, end));
   }
 
diff --git a/Marlin/src/sd/Sd2Card.cpp b/Marlin/src/sd/Sd2Card.cpp
index 491c0692c..b914b2963 100644
--- a/Marlin/src/sd/Sd2Card.cpp
+++ b/Marlin/src/sd/Sd2Card.cpp
@@ -63,7 +63,7 @@
       0x0E,0x07,0x1C,0x15,0x2A,0x23,0x38,0x31,0x46,0x4F,0x54,0x5D,0x62,0x6B,0x70,0x79
     };
 
-    static uint8_t CRC7(const uint8_t* data, uint8_t n) {
+    static uint8_t CRC7(const uint8_t *data, uint8_t n) {
       uint8_t crc = 0;
       while (n > 0) {
         crc = pgm_read_byte(&crctab7[ (crc << 1) ^ *data++ ]);
@@ -72,7 +72,7 @@
       return (crc << 1) | 1;
     }
   #else
-    static uint8_t CRC7(const uint8_t* data, uint8_t n) {
+    static uint8_t CRC7(const uint8_t *data, uint8_t n) {
       uint8_t crc = 0;
       LOOP_L_N(i, n) {
         uint8_t d = data[i];
@@ -338,7 +338,7 @@ bool Sd2Card::init(const uint8_t sckRateID, const pin_t chipSelectPin) {
  * \param[out] dst Pointer to the location that will receive the data.
  * \return true for success, false for failure.
  */
-bool Sd2Card::readBlock(uint32_t blockNumber, uint8_t* dst) {
+bool Sd2Card::readBlock(uint32_t blockNumber, uint8_t *dst) {
   #if IS_TEENSY_35_36 || IS_TEENSY_40_41
     return 0 == SDHC_CardReadBlock(dst, blockNumber);
   #endif
@@ -378,7 +378,7 @@ bool Sd2Card::readBlock(uint32_t blockNumber, uint8_t* dst) {
  *
  * \return true for success, false for failure.
  */
-bool Sd2Card::readData(uint8_t* dst) {
+bool Sd2Card::readData(uint8_t *dst) {
   chipSelect();
   return readData(dst, 512);
 }
@@ -421,7 +421,7 @@ bool Sd2Card::readData(uint8_t* dst) {
   };
     // faster CRC-CCITT
     // uses the x^16,x^12,x^5,x^1 polynomial.
-  static uint16_t CRC_CCITT(const uint8_t* data, size_t n) {
+  static uint16_t CRC_CCITT(const uint8_t *data, size_t n) {
     uint16_t crc = 0;
     for (size_t i = 0; i < n; i++) {
       crc = pgm_read_word(&crctab16[(crc >> 8 ^ data[i]) & 0xFF]) ^ (crc << 8);
@@ -431,7 +431,7 @@ bool Sd2Card::readData(uint8_t* dst) {
   #else
     // slower CRC-CCITT
     // uses the x^16,x^12,x^5,x^1 polynomial.
-    static uint16_t CRC_CCITT(const uint8_t* data, size_t n) {
+    static uint16_t CRC_CCITT(const uint8_t *data, size_t n) {
       uint16_t crc = 0;
       for (size_t i = 0; i < n; i++) {
         crc = (uint8_t)(crc >> 8) | (crc << 8);
@@ -445,7 +445,7 @@ bool Sd2Card::readData(uint8_t* dst) {
   #endif
 #endif // SD_CHECK_AND_RETRY
 
-bool Sd2Card::readData(uint8_t* dst, const uint16_t count) {
+bool Sd2Card::readData(uint8_t *dst, const uint16_t count) {
   bool success = false;
 
   const millis_t read_timeout = millis() + SD_READ_TIMEOUT;
@@ -478,7 +478,7 @@ bool Sd2Card::readData(uint8_t* dst, const uint16_t count) {
 
 /** read CID or CSR register */
 bool Sd2Card::readRegister(const uint8_t cmd, void* buf) {
-  uint8_t* dst = reinterpret_cast<uint8_t*>(buf);
+  uint8_t *dst = reinterpret_cast<uint8_t*>(buf);
   if (cardCommand(cmd, 0)) {
     error(SD_CARD_ERROR_READ_REG);
     chipDeselect();
@@ -555,7 +555,7 @@ bool Sd2Card::waitNotBusy(const millis_t timeout_ms) {
  * \param[in] src Pointer to the location of the data to be written.
  * \return true for success, false for failure.
  */
-bool Sd2Card::writeBlock(uint32_t blockNumber, const uint8_t* src) {
+bool Sd2Card::writeBlock(uint32_t blockNumber, const uint8_t *src) {
   if (ENABLED(SDCARD_READONLY)) return false;
 
   #if IS_TEENSY_35_36 || IS_TEENSY_40_41
@@ -586,7 +586,7 @@ bool Sd2Card::writeBlock(uint32_t blockNumber, const uint8_t* src) {
  * \param[in] src Pointer to the location of the data to be written.
  * \return true for success, false for failure.
  */
-bool Sd2Card::writeData(const uint8_t* src) {
+bool Sd2Card::writeData(const uint8_t *src) {
   if (ENABLED(SDCARD_READONLY)) return false;
 
   bool success = true;
@@ -601,7 +601,7 @@ bool Sd2Card::writeData(const uint8_t* src) {
 }
 
 // Send one block of data for write block or write multiple blocks
-bool Sd2Card::writeData(const uint8_t token, const uint8_t* src) {
+bool Sd2Card::writeData(const uint8_t token, const uint8_t *src) {
   if (ENABLED(SDCARD_READONLY)) return false;
 
   const uint16_t crc = TERN(SD_CHECK_AND_RETRY, CRC_CCITT(src, 512), 0xFFFF);
diff --git a/Marlin/src/sd/Sd2Card.h b/Marlin/src/sd/Sd2Card.h
index 6900502e0..d82cb10a1 100644
--- a/Marlin/src/sd/Sd2Card.h
+++ b/Marlin/src/sd/Sd2Card.h
@@ -124,7 +124,7 @@ public:
    */
   bool init(const uint8_t sckRateID, const pin_t chipSelectPin);
 
-  bool readBlock(uint32_t block, uint8_t* dst);
+  bool readBlock(uint32_t block, uint8_t *dst);
 
   /**
    * Read a card's CID register. The CID contains card identification
@@ -135,7 +135,7 @@ public:
    *
    * \return true for success or false for failure.
    */
-  bool readCID(cid_t* cid) { return readRegister(CMD10, cid); }
+  bool readCID(cid_t *cid) { return readRegister(CMD10, cid); }
 
   /**
    * Read a card's CSD register. The CSD contains Card-Specific Data that
@@ -145,9 +145,9 @@ public:
    *
    * \return true for success or false for failure.
    */
-  inline bool readCSD(csd_t* csd) { return readRegister(CMD9, csd); }
+  inline bool readCSD(csd_t *csd) { return readRegister(CMD9, csd); }
 
-  bool readData(uint8_t* dst);
+  bool readData(uint8_t *dst);
   bool readStart(uint32_t blockNumber);
   bool readStop();
   bool setSckRate(const uint8_t sckRateID);
@@ -157,8 +157,8 @@ public:
    * \return 0 - SD V1, 1 - SD V2, or 3 - SDHC.
    */
   int type() const {return type_;}
-  bool writeBlock(uint32_t blockNumber, const uint8_t* src);
-  bool writeData(const uint8_t* src);
+  bool writeBlock(uint32_t blockNumber, const uint8_t *src);
+  bool writeData(const uint8_t *src);
   bool writeStart(uint32_t blockNumber, const uint32_t eraseCount);
   bool writeStop();
 
@@ -176,11 +176,11 @@ private:
   }
   uint8_t cardCommand(const uint8_t cmd, const uint32_t arg);
 
-  bool readData(uint8_t* dst, const uint16_t count);
+  bool readData(uint8_t *dst, const uint16_t count);
   bool readRegister(const uint8_t cmd, void* buf);
   void chipDeselect();
   void chipSelect();
   inline void type(const uint8_t value) { type_ = value; }
   bool waitNotBusy(const millis_t timeout_ms);
-  bool writeData(const uint8_t token, const uint8_t* src);
+  bool writeData(const uint8_t token, const uint8_t *src);
 };
diff --git a/Marlin/src/sd/SdBaseFile.cpp b/Marlin/src/sd/SdBaseFile.cpp
index 3cd88318f..120668baa 100644
--- a/Marlin/src/sd/SdBaseFile.cpp
+++ b/Marlin/src/sd/SdBaseFile.cpp
@@ -43,7 +43,7 @@
 SdBaseFile* SdBaseFile::cwd_ = 0;   // Pointer to Current Working Directory
 
 // callback function for date/time
-void (*SdBaseFile::dateTime_)(uint16_t* date, uint16_t* time) = 0;
+void (*SdBaseFile::dateTime_)(uint16_t *date, uint16_t *time) = 0;
 
 // add a cluster to a file
 bool SdBaseFile::addCluster() {
@@ -118,7 +118,7 @@ bool SdBaseFile::close() {
  * Reasons for failure include file is not contiguous, file has zero length
  * or an I/O error occurred.
  */
-bool SdBaseFile::contiguousRange(uint32_t* bgnBlock, uint32_t* endBlock) {
+bool SdBaseFile::contiguousRange(uint32_t *bgnBlock, uint32_t *endBlock) {
   // error if no blocks
   if (firstCluster_ == 0) return false;
 
@@ -155,7 +155,7 @@ bool SdBaseFile::contiguousRange(uint32_t* bgnBlock, uint32_t* endBlock) {
  * a file is already open, the file already exists, the root
  * directory is full or an I/O error.
  */
-bool SdBaseFile::createContiguous(SdBaseFile* dirFile, const char* path, uint32_t size) {
+bool SdBaseFile::createContiguous(SdBaseFile* dirFile, const char *path, uint32_t size) {
   if (ENABLED(SDCARD_READONLY)) return false;
 
   uint32_t count;
@@ -186,8 +186,8 @@ bool SdBaseFile::createContiguous(SdBaseFile* dirFile, const char* path, uint32_
  *
  * \return true for success, false for failure.
  */
-bool SdBaseFile::dirEntry(dir_t* dir) {
-  dir_t* p;
+bool SdBaseFile::dirEntry(dir_t *dir) {
+  dir_t *p;
   // make sure fields on SD are correct
   if (!sync()) return false;
 
@@ -207,7 +207,7 @@ bool SdBaseFile::dirEntry(dir_t* dir) {
  * \param[in] dir The directory structure containing the name.
  * \param[out] name A 13 byte char array for the formatted name.
  */
-void SdBaseFile::dirName(const dir_t& dir, char* name) {
+void SdBaseFile::dirName(const dir_t& dir, char *name) {
   uint8_t j = 0;
   LOOP_L_N(i, 11) {
     if (dir.name[i] == ' ')continue;
@@ -229,7 +229,7 @@ void SdBaseFile::dirName(const dir_t& dir, char* name) {
  *
  * \return true if the file exists else false.
  */
-bool SdBaseFile::exists(const char* name) {
+bool SdBaseFile::exists(const char *name) {
   SdBaseFile file;
   return file.open(this, name, O_READ);
 }
@@ -254,7 +254,7 @@ bool SdBaseFile::exists(const char* name) {
  * \return For success fgets() returns the length of the string in \a str.
  * If no data is read, fgets() returns zero for EOF or -1 if an error occurred.
  **/
-int16_t SdBaseFile::fgets(char* str, int16_t num, char* delim) {
+int16_t SdBaseFile::fgets(char *str, int16_t num, char *delim) {
   char ch;
   int16_t n = 0;
   int16_t r = -1;
@@ -293,7 +293,7 @@ bool SdBaseFile::getDosName(char * const name) {
     return true;
   }
   // cache entry
-  dir_t* p = cacheDirEntry(SdVolume::CACHE_FOR_READ);
+  dir_t *p = cacheDirEntry(SdVolume::CACHE_FOR_READ);
   if (!p) return false;
 
   // format name
@@ -301,7 +301,7 @@ bool SdBaseFile::getDosName(char * const name) {
   return true;
 }
 
-void SdBaseFile::getpos(filepos_t* pos) {
+void SdBaseFile::getpos(filepos_t *pos) {
   pos->position = curPosition_;
   pos->cluster = curCluster_;
 }
@@ -386,7 +386,7 @@ int8_t SdBaseFile::lsPrintNext(uint8_t flags, uint8_t indent) {
 }
 
 // Format directory name field from a 8.3 name string
-bool SdBaseFile::make83Name(const char* str, uint8_t* name, const char** ptr) {
+bool SdBaseFile::make83Name(const char *str, uint8_t *name, const char** ptr) {
   uint8_t n = 7,                      // Max index until a dot is found
           i = 11;
   while (i) name[--i] = ' ';          // Set whole FILENAME.EXT to spaces
@@ -423,7 +423,7 @@ bool SdBaseFile::make83Name(const char* str, uint8_t* name, const char** ptr) {
  * Reasons for failure include this file is already open, \a parent is not a
  * directory, \a path is invalid or already exists in \a parent.
  */
-bool SdBaseFile::mkdir(SdBaseFile* parent, const char* path, bool pFlag) {
+bool SdBaseFile::mkdir(SdBaseFile* parent, const char *path, bool pFlag) {
   if (ENABLED(SDCARD_READONLY)) return false;
 
   uint8_t dname[11];
@@ -460,7 +460,7 @@ bool SdBaseFile::mkdir(SdBaseFile* parent, const uint8_t dname[11]) {
 
   uint32_t block;
   dir_t d;
-  dir_t* p;
+  dir_t *p;
 
   if (!parent->isDir()) return false;
 
@@ -523,7 +523,7 @@ bool SdBaseFile::mkdir(SdBaseFile* parent, const uint8_t dname[11]) {
  *
  * \return true for success, false for failure.
  */
-bool SdBaseFile::open(const char* path, uint8_t oflag) {
+bool SdBaseFile::open(const char *path, uint8_t oflag) {
   return open(cwd_, path, oflag);
 }
 
@@ -577,7 +577,7 @@ bool SdBaseFile::open(const char* path, uint8_t oflag) {
  * a directory, \a path is invalid, the file does not exist
  * or can't be opened in the access mode specified by oflag.
  */
-bool SdBaseFile::open(SdBaseFile* dirFile, const char* path, uint8_t oflag) {
+bool SdBaseFile::open(SdBaseFile* dirFile, const char *path, uint8_t oflag) {
   uint8_t dname[11];
   SdBaseFile dir1, dir2;
   SdBaseFile *parent = dirFile, *sub = &dir1;
@@ -608,7 +608,7 @@ bool SdBaseFile::open(SdBaseFile* dirFile, const char* path, uint8_t oflag) {
 bool SdBaseFile::open(SdBaseFile* dirFile, const uint8_t dname[11], uint8_t oflag) {
   bool emptyFound = false, fileFound = false;
   uint8_t index;
-  dir_t* p;
+  dir_t *p;
 
   vol_ = dirFile->vol_;
 
@@ -697,7 +697,7 @@ bool SdBaseFile::open(SdBaseFile* dirFile, const uint8_t dname[11], uint8_t ofla
  * \return true for success or false for failure.
  */
 bool SdBaseFile::open(SdBaseFile* dirFile, uint16_t index, uint8_t oflag) {
-  dir_t* p;
+  dir_t *p;
 
   vol_ = dirFile->vol_;
 
@@ -725,7 +725,7 @@ bool SdBaseFile::open(SdBaseFile* dirFile, uint16_t index, uint8_t oflag) {
 
 // open a cached directory entry. Assumes vol_ is initialized
 bool SdBaseFile::openCachedEntry(uint8_t dirIndex, uint8_t oflag) {
-  dir_t* p;
+  dir_t *p;
 
   #if ENABLED(SDCARD_READONLY)
     if (oflag & (O_WRITE | O_CREAT | O_TRUNC)) goto FAIL;
@@ -785,7 +785,7 @@ bool SdBaseFile::openCachedEntry(uint8_t dirIndex, uint8_t oflag) {
  * \return true for success or false for failure.
  */
 bool SdBaseFile::openNext(SdBaseFile* dirFile, uint8_t oflag) {
-  dir_t* p;
+  dir_t *p;
   uint8_t index;
 
   if (!dirFile) return false;
@@ -827,7 +827,7 @@ bool SdBaseFile::openNext(SdBaseFile* dirFile, uint8_t oflag) {
  */
 bool SdBaseFile::openParent(SdBaseFile* dir) {
   dir_t entry;
-  dir_t* p;
+  dir_t *p;
   SdBaseFile file;
   uint32_t c;
   uint32_t cluster;
@@ -1009,7 +1009,7 @@ int16_t SdBaseFile::read() {
  * or an I/O error occurred.
  */
 int16_t SdBaseFile::read(void* buf, uint16_t nbyte) {
-  uint8_t* dst = reinterpret_cast<uint8_t*>(buf);
+  uint8_t *dst = reinterpret_cast<uint8_t*>(buf);
   uint16_t offset, toRead;
   uint32_t block;  // raw device block number
 
@@ -1049,7 +1049,7 @@ int16_t SdBaseFile::read(void* buf, uint16_t nbyte) {
     else {
       // read block to cache and copy data to caller
       if (!vol_->cacheRawBlock(block, SdVolume::CACHE_FOR_READ)) return -1;
-      uint8_t* src = vol_->cache()->data + offset;
+      uint8_t *src = vol_->cache()->data + offset;
       memcpy(dst, src, n);
     }
     dst += n;
@@ -1070,7 +1070,7 @@ int16_t SdBaseFile::read(void* buf, uint16_t nbyte) {
  * readDir() called before a directory has been opened, this is not
  * a directory file or an I/O error occurred.
  */
-int8_t SdBaseFile::readDir(dir_t* dir, char* longFilename) {
+int8_t SdBaseFile::readDir(dir_t *dir, char *longFilename) {
   int16_t n;
   // if not a directory file or miss-positioned return an error
   if (!isDir() || (0x1F & curPosition_)) return -1;
@@ -1096,7 +1096,7 @@ int8_t SdBaseFile::readDir(dir_t* dir, char* longFilename) {
     // Fill the long filename if we have a long filename entry.
     // Long filename entries are stored before the short filename.
     if (longFilename && DIR_IS_LONG_NAME(dir)) {
-      vfat_t* VFAT = (vfat_t*)dir;
+      vfat_t *VFAT = (vfat_t*)dir;
       // Sanity-check the VFAT entry. The first cluster is always set to zero. And the sequence number should be higher than 0
       if (VFAT->firstClusterLow == 0) {
         const uint8_t seq = VFAT->sequenceNumber & 0x1F;
@@ -1199,7 +1199,7 @@ dir_t* SdBaseFile::readDirCache() {
 bool SdBaseFile::remove() {
   if (ENABLED(SDCARD_READONLY)) return false;
 
-  dir_t* d;
+  dir_t *d;
   // free any clusters - will fail if read-only or directory
   if (!truncate(0)) return false;
 
@@ -1235,7 +1235,7 @@ bool SdBaseFile::remove() {
  * \a dirFile is not a directory, \a path is not found
  * or an I/O error occurred.
  */
-bool SdBaseFile::remove(SdBaseFile* dirFile, const char* path) {
+bool SdBaseFile::remove(SdBaseFile* dirFile, const char *path) {
   if (ENABLED(SDCARD_READONLY)) return false;
 
   SdBaseFile file;
@@ -1252,13 +1252,13 @@ bool SdBaseFile::remove(SdBaseFile* dirFile, const char* path) {
  * Reasons for failure include \a dirFile is not open or is not a directory
  * file, newPath is invalid or already exists, or an I/O error occurs.
  */
-bool SdBaseFile::rename(SdBaseFile* dirFile, const char* newPath) {
+bool SdBaseFile::rename(SdBaseFile* dirFile, const char *newPath) {
   if (ENABLED(SDCARD_READONLY)) return false;
 
   dir_t entry;
   uint32_t dirCluster = 0;
   SdBaseFile file;
-  dir_t* d;
+  dir_t *d;
 
   // must be an open file or subdirectory
   if (!(isFile() || isSubDir())) return false;
@@ -1356,7 +1356,7 @@ bool SdBaseFile::rmdir() {
 
   // make sure directory is empty
   while (curPosition_ < fileSize_) {
-    dir_t* p = readDirCache();
+    dir_t *p = readDirCache();
     if (!p) return false;
     // done if past last used entry
     if (p->name[0] == DIR_NAME_FREE) break;
@@ -1396,7 +1396,7 @@ bool SdBaseFile::rmRfStar() {
     // remember position
     index = curPosition_ / 32;
 
-    dir_t* p = readDirCache();
+    dir_t *p = readDirCache();
     if (!p) return false;
 
     // done if past last entry
@@ -1438,7 +1438,7 @@ bool SdBaseFile::rmRfStar() {
  * \param[in] oflag Values for \a oflag are constructed by a bitwise-inclusive
  * OR of open flags. see SdBaseFile::open(SdBaseFile*, const char*, uint8_t).
  */
-SdBaseFile::SdBaseFile(const char* path, uint8_t oflag) {
+SdBaseFile::SdBaseFile(const char *path, uint8_t oflag) {
   type_ = FAT_FILE_TYPE_CLOSED;
   writeError = false;
   open(path, oflag);
@@ -1481,7 +1481,7 @@ bool SdBaseFile::seekSet(const uint32_t pos) {
   return true;
 }
 
-void SdBaseFile::setpos(filepos_t* pos) {
+void SdBaseFile::setpos(filepos_t *pos) {
   curPosition_ = pos->position;
   curCluster_ = pos->cluster;
 }
@@ -1499,7 +1499,7 @@ bool SdBaseFile::sync() {
   if (ENABLED(SDCARD_READONLY) || !isOpen()) goto FAIL;
 
   if (flags_ & F_FILE_DIR_DIRTY) {
-    dir_t* d = cacheDirEntry(SdVolume::CACHE_FOR_WRITE);
+    dir_t *d = cacheDirEntry(SdVolume::CACHE_FOR_WRITE);
     // check for deleted by another open file object
     if (!d || d->name[0] == DIR_NAME_DELETED) goto FAIL;
 
@@ -1537,7 +1537,7 @@ bool SdBaseFile::sync() {
  * \return true for success, false for failure.
  */
 bool SdBaseFile::timestamp(SdBaseFile* file) {
-  dir_t* d;
+  dir_t *d;
   dir_t dir;
 
   // get timestamps
@@ -1599,7 +1599,7 @@ bool SdBaseFile::timestamp(uint8_t flags, uint16_t year, uint8_t month,
   if (ENABLED(SDCARD_READONLY)) return false;
 
   uint16_t dirDate, dirTime;
-  dir_t* d;
+  dir_t *d;
 
   if (!isOpen()
       || year < 1980
@@ -1716,7 +1716,7 @@ int16_t SdBaseFile::write(const void* buf, uint16_t nbyte) {
   #endif
 
   // convert void* to uint8_t*  -  must be before goto statements
-  const uint8_t* src = reinterpret_cast<const uint8_t*>(buf);
+  const uint8_t *src = reinterpret_cast<const uint8_t*>(buf);
 
   // number of bytes left to write  -  must be before goto statements
   uint16_t nToWrite = nbyte;
@@ -1782,7 +1782,7 @@ int16_t SdBaseFile::write(const void* buf, uint16_t nbyte) {
         // rewrite part of block
         if (!vol_->cacheRawBlock(block, SdVolume::CACHE_FOR_WRITE)) goto FAIL;
       }
-      uint8_t* dst = vol_->cache()->data + blockOffset;
+      uint8_t *dst = vol_->cache()->data + blockOffset;
       memcpy(dst, src, n);
     }
     curPosition_ += n;
diff --git a/Marlin/src/sd/SdBaseFile.h b/Marlin/src/sd/SdBaseFile.h
index 2f7dfb9f3..1e2bc5d09 100644
--- a/Marlin/src/sd/SdBaseFile.h
+++ b/Marlin/src/sd/SdBaseFile.h
@@ -163,7 +163,7 @@ uint16_t const FAT_DEFAULT_TIME = (1 << 11);
 class SdBaseFile {
  public:
   SdBaseFile() : writeError(false), type_(FAT_FILE_TYPE_CLOSED) {}
-  SdBaseFile(const char* path, uint8_t oflag);
+  SdBaseFile(const char *path, uint8_t oflag);
   ~SdBaseFile() { if (isOpen()) close(); }
 
   /**
@@ -179,18 +179,18 @@ class SdBaseFile {
    * get position for streams
    * \param[out] pos struct to receive position
    */
-  void getpos(filepos_t* pos);
+  void getpos(filepos_t *pos);
 
   /**
    * set position for streams
    * \param[out] pos struct with value for new position
    */
-  void setpos(filepos_t* pos);
+  void setpos(filepos_t *pos);
 
   bool close();
-  bool contiguousRange(uint32_t* bgnBlock, uint32_t* endBlock);
+  bool contiguousRange(uint32_t *bgnBlock, uint32_t *endBlock);
   bool createContiguous(SdBaseFile* dirFile,
-                        const char* path, uint32_t size);
+                        const char *path, uint32_t size);
   /**
    * \return The current cluster number for a file or directory.
    */
@@ -213,7 +213,7 @@ class SdBaseFile {
    * function is of the form:
    *
    * \code
-   * void dateTime(uint16_t* date, uint16_t* time) {
+   * void dateTime(uint16_t *date, uint16_t *time) {
    *   uint16_t year;
    *   uint8_t month, day, hour, minute, second;
    *
@@ -235,7 +235,7 @@ class SdBaseFile {
    * See the timestamp() function.
    */
   static void dateTimeCallback(
-    void (*dateTime)(uint16_t* date, uint16_t* time)) {
+    void (*dateTime)(uint16_t *date, uint16_t *time)) {
     dateTime_ = dateTime;
   }
 
@@ -243,10 +243,10 @@ class SdBaseFile {
    * Cancel the date/time callback function.
    */
   static void dateTimeCallbackCancel() { dateTime_ = 0; }
-  bool dirEntry(dir_t* dir);
-  static void dirName(const dir_t& dir, char* name);
-  bool exists(const char* name);
-  int16_t fgets(char* str, int16_t num, char* delim = 0);
+  bool dirEntry(dir_t *dir);
+  static void dirName(const dir_t& dir, char *name);
+  bool exists(const char *name);
+  int16_t fgets(char *str, int16_t num, char *delim = 0);
 
   /**
    * \return The total number of bytes in a file or directory.
@@ -286,10 +286,10 @@ class SdBaseFile {
   bool getDosName(char * const name);
   void ls(uint8_t flags = 0, uint8_t indent = 0);
 
-  bool mkdir(SdBaseFile* dir, const char* path, bool pFlag = true);
+  bool mkdir(SdBaseFile* dir, const char *path, bool pFlag = true);
   bool open(SdBaseFile* dirFile, uint16_t index, uint8_t oflag);
-  bool open(SdBaseFile* dirFile, const char* path, uint8_t oflag);
-  bool open(const char* path, uint8_t oflag = O_READ);
+  bool open(SdBaseFile* dirFile, const char *path, uint8_t oflag);
+  bool open(const char *path, uint8_t oflag = O_READ);
   bool openNext(SdBaseFile* dirFile, uint8_t oflag);
   bool openRoot(SdVolume* vol);
   int peek();
@@ -298,15 +298,15 @@ class SdBaseFile {
   bool printName();
   int16_t read();
   int16_t read(void* buf, uint16_t nbyte);
-  int8_t readDir(dir_t* dir, char* longFilename);
-  static bool remove(SdBaseFile* dirFile, const char* path);
+  int8_t readDir(dir_t *dir, char *longFilename);
+  static bool remove(SdBaseFile* dirFile, const char *path);
   bool remove();
 
   /**
    * Set the file's current position to zero.
    */
   void rewind() { seekSet(0); }
-  bool rename(SdBaseFile* dirFile, const char* newPath);
+  bool rename(SdBaseFile* dirFile, const char *newPath);
   bool rmdir();
   bool rmRfStar();
 
@@ -348,7 +348,7 @@ class SdBaseFile {
   static SdBaseFile* cwd_;      // global pointer to cwd dir
 
   // data time callback function
-  static void (*dateTime_)(uint16_t* date, uint16_t* time);
+  static void (*dateTime_)(uint16_t *date, uint16_t *time);
 
   // bits defined in flags_
   static uint8_t const F_OFLAG = (O_ACCMODE | O_APPEND | O_SYNC),   // should be 0x0F
@@ -376,7 +376,7 @@ class SdBaseFile {
   bool addDirCluster();
   dir_t* cacheDirEntry(uint8_t action);
   int8_t lsPrintNext(uint8_t flags, uint8_t indent);
-  static bool make83Name(const char* str, uint8_t* name, const char** ptr);
+  static bool make83Name(const char *str, uint8_t *name, const char** ptr);
   bool mkdir(SdBaseFile* parent, const uint8_t dname[11]);
   bool open(SdBaseFile* dirFile, const uint8_t dname[11], uint8_t oflag);
   bool openCachedEntry(uint8_t cacheIndex, uint8_t oflags);
diff --git a/Marlin/src/sd/SdFatStructs.h b/Marlin/src/sd/SdFatStructs.h
index ac81f1d64..03bbc1c19 100644
--- a/Marlin/src/sd/SdFatStructs.h
+++ b/Marlin/src/sd/SdFatStructs.h
@@ -571,7 +571,7 @@ uint8_t const DIR_NAME_0xE5     = 0x05,       // escape for name[0] = 0xE5
  *
  * \return true if the entry is for part of a long name else false.
  */
-static inline uint8_t DIR_IS_LONG_NAME(const dir_t* dir) {
+static inline uint8_t DIR_IS_LONG_NAME(const dir_t *dir) {
   return (dir->attributes & DIR_ATT_LONG_NAME_MASK) == DIR_ATT_LONG_NAME;
 }
 
@@ -584,7 +584,7 @@ uint8_t const DIR_ATT_FILE_TYPE_MASK = (DIR_ATT_VOLUME_ID | DIR_ATT_DIRECTORY);
  *
  * \return true if the entry is for a normal file else false.
  */
-static inline uint8_t DIR_IS_FILE(const dir_t* dir) {
+static inline uint8_t DIR_IS_FILE(const dir_t *dir) {
   return (dir->attributes & DIR_ATT_FILE_TYPE_MASK) == 0;
 }
 
@@ -594,7 +594,7 @@ static inline uint8_t DIR_IS_FILE(const dir_t* dir) {
  *
  * \return true if the entry is for a subdirectory else false.
  */
-static inline uint8_t DIR_IS_SUBDIR(const dir_t* dir) {
+static inline uint8_t DIR_IS_SUBDIR(const dir_t *dir) {
   return (dir->attributes & DIR_ATT_FILE_TYPE_MASK) == DIR_ATT_DIRECTORY;
 }
 
@@ -604,6 +604,6 @@ static inline uint8_t DIR_IS_SUBDIR(const dir_t* dir) {
  *
  * \return true if the entry is for a normal file or subdirectory else false.
  */
-static inline uint8_t DIR_IS_FILE_OR_SUBDIR(const dir_t* dir) {
+static inline uint8_t DIR_IS_FILE_OR_SUBDIR(const dir_t *dir) {
   return (dir->attributes & DIR_ATT_VOLUME_ID) == 0;
 }
diff --git a/Marlin/src/sd/SdFile.cpp b/Marlin/src/sd/SdFile.cpp
index cba67e2bb..cc86ce819 100644
--- a/Marlin/src/sd/SdFile.cpp
+++ b/Marlin/src/sd/SdFile.cpp
@@ -43,7 +43,7 @@
  * \param[in] oflag Values for \a oflag are constructed by a bitwise-inclusive
  * OR of open flags. see SdBaseFile::open(SdBaseFile*, const char*, uint8_t).
  */
-SdFile::SdFile(const char* path, uint8_t oflag) : SdBaseFile(path, oflag) { }
+SdFile::SdFile(const char *path, uint8_t oflag) : SdBaseFile(path, oflag) { }
 
 /**
  * Write data to an open file.
@@ -78,7 +78,7 @@ int16_t SdFile::write(const void* buf, uint16_t nbyte) { return SdBaseFile::writ
  * \param[in] str Pointer to the string.
  * Use writeError to check for errors.
  */
-void SdFile::write(const char* str) { SdBaseFile::write(str, strlen(str)); }
+void SdFile::write(const char *str) { SdBaseFile::write(str, strlen(str)); }
 
 /**
  * Write a PROGMEM string to a file.
diff --git a/Marlin/src/sd/SdFile.h b/Marlin/src/sd/SdFile.h
index 17256b47c..69fe05b49 100644
--- a/Marlin/src/sd/SdFile.h
+++ b/Marlin/src/sd/SdFile.h
@@ -42,7 +42,7 @@
 class SdFile : public SdBaseFile {
  public:
   SdFile() {}
-  SdFile(const char* name, uint8_t oflag);
+  SdFile(const char *name, uint8_t oflag);
   #if ARDUINO >= 100
     size_t write(uint8_t b);
   #else
@@ -50,7 +50,7 @@ class SdFile : public SdBaseFile {
   #endif
 
   int16_t write(const void* buf, uint16_t nbyte);
-  void write(const char* str);
+  void write(const char *str);
   void write_P(PGM_P str);
   void writeln_P(PGM_P str);
 };
diff --git a/Marlin/src/sd/SdVolume.cpp b/Marlin/src/sd/SdVolume.cpp
index e262c8867..7fcebd640 100644
--- a/Marlin/src/sd/SdVolume.cpp
+++ b/Marlin/src/sd/SdVolume.cpp
@@ -47,7 +47,7 @@
 #endif  // USE_MULTIPLE_CARDS
 
 // find a contiguous group of clusters
-bool SdVolume::allocContiguous(uint32_t count, uint32_t* curCluster) {
+bool SdVolume::allocContiguous(uint32_t count, uint32_t *curCluster) {
   if (ENABLED(SDCARD_READONLY)) return false;
 
   // start of group
@@ -149,7 +149,7 @@ bool SdVolume::cacheRawBlock(uint32_t blockNumber, bool dirty) {
 }
 
 // return the size in bytes of a cluster chain
-bool SdVolume::chainSize(uint32_t cluster, uint32_t* size) {
+bool SdVolume::chainSize(uint32_t cluster, uint32_t *size) {
   uint32_t s = 0;
   do {
     if (!fatGet(cluster, &cluster)) return false;
@@ -160,7 +160,7 @@ bool SdVolume::chainSize(uint32_t cluster, uint32_t* size) {
 }
 
 // Fetch a FAT entry
-bool SdVolume::fatGet(uint32_t cluster, uint32_t* value) {
+bool SdVolume::fatGet(uint32_t cluster, uint32_t *value) {
   uint32_t lba;
   if (cluster > (clusterCount_ + 1)) return false;
   if (FAT12_SUPPORT && fatType_ == 12) {
@@ -328,7 +328,7 @@ int32_t SdVolume::freeClusterCount() {
  */
 bool SdVolume::init(Sd2Card* dev, uint8_t part) {
   uint32_t totalBlocks, volumeStartBlock = 0;
-  fat32_boot_t* fbs;
+  fat32_boot_t *fbs;
 
   sdCard_ = dev;
   fatType_ = 0;
@@ -342,7 +342,7 @@ bool SdVolume::init(Sd2Card* dev, uint8_t part) {
   if (part) {
     if (part > 4) return false;
     if (!cacheRawBlock(volumeStartBlock, CACHE_FOR_READ)) return false;
-    part_t* p = &cacheBuffer_.mbr.part[part - 1];
+    part_t *p = &cacheBuffer_.mbr.part[part - 1];
     if ((p->boot & 0x7F) != 0  || p->totalSectors < 100 || p->firstSector == 0)
       return false; // not a valid partition
     volumeStartBlock = p->firstSector;
diff --git a/Marlin/src/sd/SdVolume.h b/Marlin/src/sd/SdVolume.h
index 2d57c681c..812208745 100644
--- a/Marlin/src/sd/SdVolume.h
+++ b/Marlin/src/sd/SdVolume.h
@@ -124,7 +124,7 @@ class SdVolume {
    * \param[out] v value of entry
    * \return true for success or false for failure
    */
-  bool dbgFat(uint32_t n, uint32_t* v) { return fatGet(n, v); }
+  bool dbgFat(uint32_t n, uint32_t *v) { return fatGet(n, v); }
 
  private:
   // Allow SdBaseFile access to SdVolume private data.
@@ -161,7 +161,7 @@ class SdVolume {
   uint16_t rootDirEntryCount_;  // number of entries in FAT16 root dir
   uint32_t rootDirStart_;       // root start block for FAT16, cluster for FAT32
 
-  bool allocContiguous(uint32_t count, uint32_t* curCluster);
+  bool allocContiguous(uint32_t count, uint32_t *curCluster);
   uint8_t blockOfCluster(uint32_t position) const { return (position >> 9) & (blocksPerCluster_ - 1); }
   uint32_t clusterStartBlock(uint32_t cluster) const { return dataStartBlock_ + ((cluster - 2) << clusterSizeShift_); }
   uint32_t blockNumber(uint32_t cluster, uint32_t position) const { return clusterStartBlock(cluster) + blockOfCluster(position); }
@@ -183,8 +183,8 @@ class SdVolume {
     cacheBlockNumber_  = blockNumber;
   }
   void cacheSetDirty() { cacheDirty_ |= CACHE_FOR_WRITE; }
-  bool chainSize(uint32_t beginCluster, uint32_t* size);
-  bool fatGet(uint32_t cluster, uint32_t* value);
+  bool chainSize(uint32_t beginCluster, uint32_t *size);
+  bool fatGet(uint32_t cluster, uint32_t *value);
   bool fatPut(uint32_t cluster, uint32_t value);
   bool fatPutEOC(uint32_t cluster) { return fatPut(cluster, 0x0FFFFFFF); }
   bool freeChain(uint32_t cluster);
@@ -193,6 +193,6 @@ class SdVolume {
     if (fatType_ == 16) return cluster >= FAT16EOC_MIN;
     return  cluster >= FAT32EOC_MIN;
   }
-  bool readBlock(uint32_t block, uint8_t* dst) { return sdCard_->readBlock(block, dst); }
-  bool writeBlock(uint32_t block, const uint8_t* dst) { return sdCard_->writeBlock(block, dst); }
+  bool readBlock(uint32_t block, uint8_t *dst) { return sdCard_->readBlock(block, dst); }
+  bool writeBlock(uint32_t block, const uint8_t *dst) { return sdCard_->writeBlock(block, dst); }
 };
diff --git a/Marlin/src/sd/cardreader.h b/Marlin/src/sd/cardreader.h
index 4399d9a4b..1f917f857 100644
--- a/Marlin/src/sd/cardreader.h
+++ b/Marlin/src/sd/cardreader.h
@@ -122,7 +122,7 @@ public:
 
   // Select a file
   static void selectFileByIndex(const uint16_t nr);
-  static void selectFileByName(const char* const match);
+  static void selectFileByName(const char * const match);
 
   // Print job
   static void openAndPrintFile(const char *name);   // (working directory)
diff --git a/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp b/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp
index 6dc706312..dc9efcb67 100644
--- a/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp
+++ b/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp
@@ -295,7 +295,7 @@ uint32_t Sd2Card::cardSize() {
   return lun0_capacity;
 }
 
-bool Sd2Card::readBlock(uint32_t block, uint8_t* dst) {
+bool Sd2Card::readBlock(uint32_t block, uint8_t *dst) {
   if (!isInserted()) return false;
   #if USB_DEBUG >= 3
     if (block >= lun0_capacity) {
@@ -309,7 +309,7 @@ bool Sd2Card::readBlock(uint32_t block, uint8_t* dst) {
   return bulk.Read(0, block, 512, 1, dst) == 0;
 }
 
-bool Sd2Card::writeBlock(uint32_t block, const uint8_t* src) {
+bool Sd2Card::writeBlock(uint32_t block, const uint8_t *src) {
   if (!isInserted()) return false;
   #if USB_DEBUG >= 3
     if (block >= lun0_capacity) {
diff --git a/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.h b/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.h
index 578912136..320678d09 100644
--- a/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.h
+++ b/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.h
@@ -60,15 +60,15 @@ class Sd2Card {
     static void idle();
 
     inline bool readStart(const uint32_t block)                  { pos = block; return isReady(); }
-    inline bool readData(uint8_t* dst)                           { return readBlock(pos++, dst); }
+    inline bool readData(uint8_t *dst)                           { return readBlock(pos++, dst); }
     inline bool readStop() const                                 { return true; }
 
     inline bool writeStart(const uint32_t block, const uint32_t) { pos = block; return isReady(); }
-    inline bool writeData(uint8_t* src)                          { return writeBlock(pos++, src); }
+    inline bool writeData(uint8_t *src)                          { return writeBlock(pos++, src); }
     inline bool writeStop() const                                { return true; }
 
-    bool readBlock(uint32_t block, uint8_t* dst);
-    bool writeBlock(uint32_t blockNumber, const uint8_t* src);
+    bool readBlock(uint32_t block, uint8_t *dst);
+    bool writeBlock(uint32_t blockNumber, const uint8_t *src);
 
     bool readCSD(csd_t*)                                         { return true; }
 
diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs2/Usb.cpp b/Marlin/src/sd/usb_flashdrive/lib-uhs2/Usb.cpp
index f26e82b9c..75421f448 100644
--- a/Marlin/src/sd/usb_flashdrive/lib-uhs2/Usb.cpp
+++ b/Marlin/src/sd/usb_flashdrive/lib-uhs2/Usb.cpp
@@ -133,7 +133,7 @@ uint8_t USB::SetAddress(uint8_t addr, uint8_t ep, EpInfo **ppep, uint16_t *nak_l
 /* 00       =   success         */
 /* 01-0f    =   non-zero HRSLT  */
 uint8_t USB::ctrlReq(uint8_t addr, uint8_t ep, uint8_t bmReqType, uint8_t bRequest, uint8_t wValLo, uint8_t wValHi,
-  uint16_t wInd, uint16_t total, uint16_t nbytes, uint8_t* dataptr, USBReadParser *p) {
+  uint16_t wInd, uint16_t total, uint16_t nbytes, uint8_t *dataptr, USBReadParser *p) {
   bool direction = false; // Request direction, IN or OUT
   uint8_t rcode;
   SETUP_PKT setup_pkt;
@@ -201,7 +201,7 @@ uint8_t USB::ctrlReq(uint8_t addr, uint8_t ep, uint8_t bmReqType, uint8_t bReque
  * Keep sending INs and writes data to memory area pointed by 'data'
  * rcode 0 if no errors. rcode 01-0f is relayed from dispatchPkt(). Rcode f0 means RCVDAVIRQ error, fe = USB xfer timeout
  */
-uint8_t USB::inTransfer(uint8_t addr, uint8_t ep, uint16_t *nbytesptr, uint8_t* data, uint8_t bInterval /*= 0*/) {
+uint8_t USB::inTransfer(uint8_t addr, uint8_t ep, uint16_t *nbytesptr, uint8_t *data, uint8_t bInterval /*= 0*/) {
   EpInfo *pep = nullptr;
   uint16_t nak_limit = 0;
 
@@ -215,7 +215,7 @@ uint8_t USB::inTransfer(uint8_t addr, uint8_t ep, uint16_t *nbytesptr, uint8_t*
   return InTransfer(pep, nak_limit, nbytesptr, data, bInterval);
 }
 
-uint8_t USB::InTransfer(EpInfo *pep, uint16_t nak_limit, uint16_t *nbytesptr, uint8_t* data, uint8_t bInterval /*= 0*/) {
+uint8_t USB::InTransfer(EpInfo *pep, uint16_t nak_limit, uint16_t *nbytesptr, uint8_t *data, uint8_t bInterval /*= 0*/) {
   uint8_t rcode = 0;
   uint8_t pktsize;
 
@@ -286,7 +286,7 @@ uint8_t USB::InTransfer(EpInfo *pep, uint16_t nak_limit, uint16_t *nbytesptr, ui
  * Handles NAK bug per Maxim Application Note 4000 for single buffer transfer
  * rcode 0 if no errors. rcode 01-0f is relayed from HRSL
  */
-uint8_t USB::outTransfer(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t* data) {
+uint8_t USB::outTransfer(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t *data) {
   EpInfo *pep = nullptr;
   uint16_t nak_limit = 0;
 
@@ -743,12 +743,12 @@ uint8_t USB::ReleaseDevice(uint8_t addr) {
 }
 
 // Get device descriptor
-uint8_t USB::getDevDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t* dataptr) {
+uint8_t USB::getDevDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t *dataptr) {
   return ctrlReq(addr, ep, bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, 0x00, USB_DESCRIPTOR_DEVICE, 0x0000, nbytes, nbytes, dataptr, nullptr);
 }
 
 // Get configuration descriptor
-uint8_t USB::getConfDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t conf, uint8_t* dataptr) {
+uint8_t USB::getConfDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t conf, uint8_t *dataptr) {
   return ctrlReq(addr, ep, bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, conf, USB_DESCRIPTOR_CONFIGURATION, 0x0000, nbytes, nbytes, dataptr, nullptr);
 }
 
@@ -774,7 +774,7 @@ uint8_t USB::getConfDescr(uint8_t addr, uint8_t ep, uint8_t conf, USBReadParser
 }
 
 // Get string descriptor
-uint8_t USB::getStrDescr(uint8_t addr, uint8_t ep, uint16_t ns, uint8_t index, uint16_t langid, uint8_t* dataptr) {
+uint8_t USB::getStrDescr(uint8_t addr, uint8_t ep, uint16_t ns, uint8_t index, uint16_t langid, uint8_t *dataptr) {
   return ctrlReq(addr, ep, bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, index, USB_DESCRIPTOR_STRING, langid, ns, ns, dataptr, nullptr);
 }
 
diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs2/UsbCore.h b/Marlin/src/sd/usb_flashdrive/lib-uhs2/UsbCore.h
index d94958dd5..5c76ffb75 100644
--- a/Marlin/src/sd/usb_flashdrive/lib-uhs2/UsbCore.h
+++ b/Marlin/src/sd/usb_flashdrive/lib-uhs2/UsbCore.h
@@ -250,19 +250,19 @@ public:
   uint8_t setEpInfoEntry(uint8_t addr, uint8_t epcount, EpInfo* eprecord_ptr);
 
   /* Control requests */
-  uint8_t getDevDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t* dataptr);
-  uint8_t getConfDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t conf, uint8_t* dataptr);
+  uint8_t getDevDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t *dataptr);
+  uint8_t getConfDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t conf, uint8_t *dataptr);
 
   uint8_t getConfDescr(uint8_t addr, uint8_t ep, uint8_t conf, USBReadParser *p);
 
-  uint8_t getStrDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t index, uint16_t langid, uint8_t* dataptr);
+  uint8_t getStrDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t index, uint16_t langid, uint8_t *dataptr);
   uint8_t setAddr(uint8_t oldaddr, uint8_t ep, uint8_t newaddr);
   uint8_t setConf(uint8_t addr, uint8_t ep, uint8_t conf_value);
   /**/
-  uint8_t ctrlData(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t* dataptr, bool direction);
+  uint8_t ctrlData(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t *dataptr, bool direction);
   uint8_t ctrlStatus(uint8_t ep, bool direction, uint16_t nak_limit);
-  uint8_t inTransfer(uint8_t addr, uint8_t ep, uint16_t *nbytesptr, uint8_t* data, uint8_t bInterval = 0);
-  uint8_t outTransfer(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t* data);
+  uint8_t inTransfer(uint8_t addr, uint8_t ep, uint16_t *nbytesptr, uint8_t *data, uint8_t bInterval = 0);
+  uint8_t outTransfer(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t *data);
   uint8_t dispatchPkt(uint8_t token, uint8_t ep, uint16_t nak_limit);
 
   void Task();
@@ -272,7 +272,7 @@ public:
   uint8_t ReleaseDevice(uint8_t addr);
 
   uint8_t ctrlReq(uint8_t addr, uint8_t ep, uint8_t bmReqType, uint8_t bRequest, uint8_t wValLo, uint8_t wValHi,
-    uint16_t wInd, uint16_t total, uint16_t nbytes, uint8_t* dataptr, USBReadParser *p);
+    uint16_t wInd, uint16_t total, uint16_t nbytes, uint8_t *dataptr, USBReadParser *p);
 
 private:
   void init();
@@ -285,17 +285,17 @@ private:
 #if 0 //defined(USB_METHODS_INLINE)
 //get device descriptor
 
-inline uint8_t USB::getDevDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t* dataptr) {
+inline uint8_t USB::getDevDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t *dataptr) {
   return ( ctrlReq(addr, ep, bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, 0x00, USB_DESCRIPTOR_DEVICE, 0x0000, nbytes, dataptr));
 }
 //get configuration descriptor
 
-inline uint8_t USB::getConfDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t conf, uint8_t* dataptr) {
+inline uint8_t USB::getConfDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t conf, uint8_t *dataptr) {
   return ( ctrlReq(addr, ep, bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, conf, USB_DESCRIPTOR_CONFIGURATION, 0x0000, nbytes, dataptr));
 }
 //get string descriptor
 
-inline uint8_t USB::getStrDescr(uint8_t addr, uint8_t ep, uint16_t nuint8_ts, uint8_t index, uint16_t langid, uint8_t* dataptr) {
+inline uint8_t USB::getStrDescr(uint8_t addr, uint8_t ep, uint16_t nuint8_ts, uint8_t index, uint16_t langid, uint8_t *dataptr) {
   return ( ctrlReq(addr, ep, bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, index, USB_DESCRIPTOR_STRING, langid, nuint8_ts, dataptr));
 }
 //set address
diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs2/usbhost.cpp b/Marlin/src/sd/usb_flashdrive/lib-uhs2/usbhost.cpp
index 190a0f1a9..4ee206bc3 100644
--- a/Marlin/src/sd/usb_flashdrive/lib-uhs2/usbhost.cpp
+++ b/Marlin/src/sd/usb_flashdrive/lib-uhs2/usbhost.cpp
@@ -51,7 +51,7 @@ void MAX3421e::regWr(uint8_t reg, uint8_t data) {
 
 // multiple-byte write
 // return a pointer to memory position after last written
-uint8_t* MAX3421e::bytesWr(uint8_t reg, uint8_t nbytes, uint8_t* data_p) {
+uint8_t* MAX3421e::bytesWr(uint8_t reg, uint8_t nbytes, uint8_t *data_p) {
   cs();
   spiSend(reg | 0x02);
   while (nbytes--) spiSend(*data_p++);
@@ -79,7 +79,7 @@ uint8_t MAX3421e::regRd(uint8_t reg) {
 // multiple-byte register read
 
 // return a pointer to a memory position after last read
-uint8_t* MAX3421e::bytesRd(uint8_t reg, uint8_t nbytes, uint8_t* data_p) {
+uint8_t* MAX3421e::bytesRd(uint8_t reg, uint8_t nbytes, uint8_t *data_p) {
   cs();
   spiSend(reg);
   while (nbytes--) *data_p++ = spiRec();
diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs2/usbhost.h b/Marlin/src/sd/usb_flashdrive/lib-uhs2/usbhost.h
index 5c3b852d5..cbdd28185 100644
--- a/Marlin/src/sd/usb_flashdrive/lib-uhs2/usbhost.h
+++ b/Marlin/src/sd/usb_flashdrive/lib-uhs2/usbhost.h
@@ -37,10 +37,10 @@ class MAX3421e {
     bool      start();
 
     void      regWr(uint8_t reg, uint8_t data);
-    uint8_t*  bytesWr(uint8_t reg, uint8_t nbytes, uint8_t* data_p);
+    uint8_t*  bytesWr(uint8_t reg, uint8_t nbytes, uint8_t *data_p);
     void      gpioWr(uint8_t data);
     uint8_t   regRd(uint8_t reg);
-    uint8_t*  bytesRd(uint8_t reg, uint8_t nbytes, uint8_t* data_p);
+    uint8_t*  bytesRd(uint8_t reg, uint8_t nbytes, uint8_t *data_p);
     uint8_t   gpioRd();
     bool      reset();
 
diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_host_INLINE.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_host_INLINE.h
index 4ab1a6b8f..3f758e771 100644
--- a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_host_INLINE.h
+++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_host_INLINE.h
@@ -594,7 +594,7 @@ void UHS_USB_HOST_BASE::ReleaseDevice(uint8_t addr) {
  * @param dataptr pointer to the data to return
  * @return status of the request, zero is success.
  */
-uint8_t UHS_USB_HOST_BASE::getDevDescr(uint8_t addr, uint16_t nbytes, uint8_t* dataptr) {
+uint8_t UHS_USB_HOST_BASE::getDevDescr(uint8_t addr, uint16_t nbytes, uint8_t *dataptr) {
         return ( ctrlReq(addr, mkSETUP_PKT8(UHS_bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, 0x00, USB_DESCRIPTOR_DEVICE, 0x0000, nbytes), nbytes, dataptr));
 }
 
@@ -607,7 +607,7 @@ uint8_t UHS_USB_HOST_BASE::getDevDescr(uint8_t addr, uint16_t nbytes, uint8_t* d
  * @param dataptr ointer to the data to return
  * @return status of the request, zero is success.
  */
-uint8_t UHS_USB_HOST_BASE::getConfDescr(uint8_t addr, uint16_t nbytes, uint8_t conf, uint8_t* dataptr) {
+uint8_t UHS_USB_HOST_BASE::getConfDescr(uint8_t addr, uint16_t nbytes, uint8_t conf, uint8_t *dataptr) {
         return ( ctrlReq(addr, mkSETUP_PKT8(UHS_bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, conf, USB_DESCRIPTOR_CONFIGURATION, 0x0000, nbytes), nbytes, dataptr));
 }
 
@@ -621,7 +621,7 @@ uint8_t UHS_USB_HOST_BASE::getConfDescr(uint8_t addr, uint16_t nbytes, uint8_t c
  * @param dataptr pointer to the data to return
  * @return status of the request, zero is success.
  */
-uint8_t UHS_USB_HOST_BASE::getStrDescr(uint8_t addr, uint16_t ns, uint8_t index, uint16_t langid, uint8_t* dataptr) {
+uint8_t UHS_USB_HOST_BASE::getStrDescr(uint8_t addr, uint16_t ns, uint8_t index, uint16_t langid, uint8_t *dataptr) {
         return ( ctrlReq(addr, mkSETUP_PKT8(UHS_bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, index, USB_DESCRIPTOR_STRING, langid, ns), ns, dataptr));
 }
 
@@ -668,7 +668,7 @@ uint8_t UHS_USB_HOST_BASE::setConf(uint8_t addr, uint8_t conf_value) {
  * @param data pointer to buffer to hold transfer
  * @return zero for success or error code
  */
-uint8_t UHS_USB_HOST_BASE::outTransfer(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t* data) {
+uint8_t UHS_USB_HOST_BASE::outTransfer(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t *data) {
         UHS_EpInfo *pep = NULL;
         uint16_t nak_limit = 0;
         HOST_DEBUG("outTransfer: addr: 0x%2.2x ep: 0x%2.2x nbytes: 0x%4.4x data: 0x%p\r\n", addr, ep, nbytes, data);
@@ -689,7 +689,7 @@ uint8_t UHS_USB_HOST_BASE::outTransfer(uint8_t addr, uint8_t ep, uint16_t nbytes
  * @param data pointer to buffer to hold transfer
  * @return zero for success or error code
  */
-uint8_t UHS_USB_HOST_BASE::inTransfer(uint8_t addr, uint8_t ep, uint16_t *nbytesptr, uint8_t* data) {
+uint8_t UHS_USB_HOST_BASE::inTransfer(uint8_t addr, uint8_t ep, uint16_t *nbytesptr, uint8_t *data) {
         UHS_EpInfo *pep = NULL;
         uint16_t nak_limit = 0;
 
@@ -980,7 +980,7 @@ uint8_t UHS_USB_HOST_BASE::eat(UHS_EpInfo *pep, uint16_t *left, uint16_t *read,
         return rcode;
 }
 
-uint8_t UHS_USB_HOST_BASE::ctrlReq(uint8_t addr, uint64_t Request, uint16_t nbytes, uint8_t* dataptr) {
+uint8_t UHS_USB_HOST_BASE::ctrlReq(uint8_t addr, uint64_t Request, uint16_t nbytes, uint8_t *dataptr) {
         //bool direction = bmReqType & 0x80; //request direction, IN or OUT
         uint8_t rcode = 0;
 
diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_usbhost.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_usbhost.h
index b289a896e..b81dbf2a2 100644
--- a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_usbhost.h
+++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_usbhost.h
@@ -103,7 +103,7 @@ public:
                 return (current_state == usb_task_state);
         };
 
-        virtual UHS_EpInfo * UHS_NI ctrlReqOpen(NOTUSED(uint8_t addr), NOTUSED(uint64_t Request), NOTUSED(uint8_t* dataptr)) {
+        virtual UHS_EpInfo * UHS_NI ctrlReqOpen(NOTUSED(uint8_t addr), NOTUSED(uint64_t Request), NOTUSED(uint8_t *dataptr)) {
                 return NULL;
         };
 
@@ -213,17 +213,17 @@ public:
 
         uint8_t UHS_NI EPClearHalt(uint8_t addr, uint8_t ep);
 
-        uint8_t UHS_NI ctrlReq(uint8_t addr, uint64_t Request, uint16_t nbytes, uint8_t* dataptr);
+        uint8_t UHS_NI ctrlReq(uint8_t addr, uint64_t Request, uint16_t nbytes, uint8_t *dataptr);
 
-        uint8_t UHS_NI getDevDescr(uint8_t addr, uint16_t nbytes, uint8_t* dataptr);
+        uint8_t UHS_NI getDevDescr(uint8_t addr, uint16_t nbytes, uint8_t *dataptr);
 
-        uint8_t UHS_NI getConfDescr(uint8_t addr, uint16_t nbytes, uint8_t conf, uint8_t* dataptr);
+        uint8_t UHS_NI getConfDescr(uint8_t addr, uint16_t nbytes, uint8_t conf, uint8_t *dataptr);
 
         uint8_t UHS_NI setAddr(uint8_t oldaddr, uint8_t newaddr);
 
         uint8_t UHS_NI setConf(uint8_t addr, uint8_t conf_value);
 
-        uint8_t UHS_NI getStrDescr(uint8_t addr, uint16_t nbytes, uint8_t index, uint16_t langid, uint8_t* dataptr);
+        uint8_t UHS_NI getStrDescr(uint8_t addr, uint16_t nbytes, uint8_t index, uint16_t langid, uint8_t *dataptr);
 
         void UHS_NI ReleaseDevice(uint8_t addr);
 
@@ -262,8 +262,8 @@ public:
         uint8_t enumerateInterface(ENUMERATION_INFO *ei);
         uint8_t getNextInterface(ENUMERATION_INFO *ei, UHS_EpInfo *pep, uint8_t data[], uint16_t *left, uint16_t *read, uint8_t *offset);
         uint8_t initDescrStream(ENUMERATION_INFO *ei, USB_FD_CONFIGURATION_DESCRIPTOR *ucd, UHS_EpInfo *pep, uint8_t *data, uint16_t *left, uint16_t *read, uint8_t *offset);
-        uint8_t outTransfer(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t* data);
-        uint8_t inTransfer(uint8_t addr, uint8_t ep, uint16_t *nbytesptr, uint8_t* data);
+        uint8_t outTransfer(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t *data);
+        uint8_t inTransfer(uint8_t addr, uint8_t ep, uint16_t *nbytesptr, uint8_t *data);
         uint8_t doSoftReset(uint8_t parent, uint8_t port, uint8_t address);
         uint8_t getone(UHS_EpInfo *pep, uint16_t *left, uint16_t *read, uint8_t *dataptr, uint8_t *offset);
         uint8_t eat(UHS_EpInfo *pep, uint16_t *left, uint16_t *read, uint8_t *dataptr, uint8_t *offset, uint16_t *yum);
diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/USB_HOST_SHIELD/USB_HOST_SHIELD.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/USB_HOST_SHIELD/USB_HOST_SHIELD.h
index 56d640097..7d17d626c 100644
--- a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/USB_HOST_SHIELD/USB_HOST_SHIELD.h
+++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/USB_HOST_SHIELD/USB_HOST_SHIELD.h
@@ -388,7 +388,7 @@ public:
                 return (!condet);
         };
 
-        virtual UHS_EpInfo *ctrlReqOpen(uint8_t addr, uint64_t Request, uint8_t* dataptr);
+        virtual UHS_EpInfo *ctrlReqOpen(uint8_t addr, uint64_t Request, uint8_t *dataptr);
 
         virtual void UHS_NI vbusPower(VBUS_t state) {
                 regWr(rPINCTL, (bmFDUPSPI | bmIRQ_SENSE) | (uint8_t)(state));
@@ -483,8 +483,8 @@ public:
         void gpioWr(uint8_t data);
         uint8_t regRd(uint8_t reg);
         uint8_t gpioRd();
-        uint8_t* bytesWr(uint8_t reg, uint8_t nbytes, uint8_t* data_p);
-        uint8_t* bytesRd(uint8_t reg, uint8_t nbytes, uint8_t* data_p);
+        uint8_t* bytesWr(uint8_t reg, uint8_t nbytes, uint8_t *data_p);
+        uint8_t* bytesRd(uint8_t reg, uint8_t nbytes, uint8_t *data_p);
 
         // ARM/NVIC specific, used to emulate reentrant ISR.
 #ifdef SWI_IRQ_NUM
diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/USB_HOST_SHIELD/USB_HOST_SHIELD_INLINE.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/USB_HOST_SHIELD/USB_HOST_SHIELD_INLINE.h
index 7fe48652f..6cfc0152d 100644
--- a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/USB_HOST_SHIELD/USB_HOST_SHIELD_INLINE.h
+++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/USB_HOST_SHIELD/USB_HOST_SHIELD_INLINE.h
@@ -76,7 +76,7 @@ void UHS_NI MAX3421E_HOST::regWr(uint8_t reg, uint8_t data) {
 /* multiple-byte write                            */
 
 /* returns a pointer to memory position after last written */
-uint8_t* UHS_NI MAX3421E_HOST::bytesWr(uint8_t reg, uint8_t nbytes, uint8_t* data_p) {
+uint8_t* UHS_NI MAX3421E_HOST::bytesWr(uint8_t reg, uint8_t nbytes, uint8_t *data_p) {
         SPIclass.beginTransaction(MAX3421E_SPI_Settings);
         MARLIN_UHS_WRITE_SS(LOW);
         SPIclass.transfer(reg | 0x02);
@@ -117,7 +117,7 @@ uint8_t UHS_NI MAX3421E_HOST::regRd(uint8_t reg) {
 /* multiple-byte register read  */
 
 /* returns a pointer to a memory position after last read   */
-uint8_t* UHS_NI MAX3421E_HOST::bytesRd(uint8_t reg, uint8_t nbytes, uint8_t* data_p) {
+uint8_t* UHS_NI MAX3421E_HOST::bytesRd(uint8_t reg, uint8_t nbytes, uint8_t *data_p) {
         SPIclass.beginTransaction(MAX3421E_SPI_Settings);
         MARLIN_UHS_WRITE_SS(LOW);
         SPIclass.transfer(reg);
@@ -472,7 +472,7 @@ uint8_t UHS_NI MAX3421E_HOST::SetAddress(uint8_t addr, uint8_t ep, UHS_EpInfo **
  * @param data pointer to data buffer
  * @return 0 on success
  */
-uint8_t UHS_NI MAX3421E_HOST::InTransfer(UHS_EpInfo *pep, uint16_t nak_limit, uint16_t *nbytesptr, uint8_t* data) {
+uint8_t UHS_NI MAX3421E_HOST::InTransfer(UHS_EpInfo *pep, uint16_t nak_limit, uint16_t *nbytesptr, uint8_t *data) {
         uint8_t rcode = 0;
         uint8_t pktsize;
 
diff --git a/buildroot/share/PlatformIO/variants/MARLIN_F4x7Vx/hal_conf_extra.h b/buildroot/share/PlatformIO/variants/MARLIN_F4x7Vx/hal_conf_extra.h
index abac2b08b..a8500c595 100644
--- a/buildroot/share/PlatformIO/variants/MARLIN_F4x7Vx/hal_conf_extra.h
+++ b/buildroot/share/PlatformIO/variants/MARLIN_F4x7Vx/hal_conf_extra.h
@@ -479,7 +479,7 @@
   */
   #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
 /* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
+  void assert_failed(uint8_t *file, uint32_t line);
 #else
   #define assert_param(expr) ((void)0U)
 #endif /* USE_FULL_ASSERT */
diff --git a/buildroot/share/fonts/genpages.c b/buildroot/share/fonts/genpages.c
index c855ceac5..dea5b05c5 100644
--- a/buildroot/share/fonts/genpages.c
+++ b/buildroot/share/fonts/genpages.c
@@ -142,12 +142,12 @@ uint8_t* get_utf8_value(uint8_t *pstart, wchar_t *pval) {
   return p;
 }
 
-void usage(char* progname) {
+void usage(char *progname) {
   fprintf(stderr, "usage: %s\n", progname);
   fprintf(stderr, "   read data from stdin\n");
 }
 
-void utf8_parse(const char* msg, unsigned int len) {
+void utf8_parse(const char *msg, unsigned int len) {
   uint8_t *pend = NULL;
   uint8_t *p;
   uint8_t *pre;