Adjust some variants spacing, comments

buildroot/share/PlatformIO/variants/BIGTREE_BTT002/PeripheralPins.c

@@ -123,12 +123,18 @@ const PinMap PinMap_PWM[] = {
   {PE_6,  TIM9,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2    FAN2
   {PC_9,  TIM8,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4    EXTENSION1-4
 
-  //probably unused on SKR-Pro. confirmation needed, please.
+  /**
+   * Unused by specifications on BTT002. (PLEASE CONFIRM)
+   * Uncomment the corresponding line if you want to have HardwarePWM on some pins.
+   * WARNING: check timers' usage first to avoid conflicts.
+   * If you don't know what you're doing leave things as they are or you WILL break something (including hardware)
+   * If you alter this section DO NOT report bugs to Marlin team since they are most likely caused by you. Thank you.
+   */
   //{PA_0,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
   //{PA_0,  TIM5,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
-  //{PA_1,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 is bltouch analog?
+  //{PA_1,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2  BLTOUCH is a "servo"
   //{PA_1,  TIM5,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
-  //{PA_2,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 is bltouch analog?
+  //{PA_2,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3  BLTOUCH is a "servo"
   //{PA_2,  TIM5,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
   //{PA_2,  TIM9,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
   //{PA_3,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4

buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/PeripheralPins.c

@@ -152,8 +152,8 @@ const PinMap PinMap_PWM[] = {
    */
   //{PA_0,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
   //{PA_0,  TIM5,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
-  {PA_1,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 is bltouch analog?
+  {PA_1,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2   BLTOUCH is a "servo"
-  {PA_2,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 is bltouch analog?
+  {PA_2,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3   BLTOUCH is a "servo"
   //{PA_1,  TIM5,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
   //{PA_2,  TIM5,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
   //{PA_2,  TIM9,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1

buildroot/share/PlatformIO/variants/FLY_F407ZG/PinNamesVar.h

@@ -1,50 +1,50 @@
 /* SYS_WKUP */
 #ifdef PWR_WAKEUP_PIN1
-SYS_WKUP1 = PA_0,
+  SYS_WKUP1 = PA_0,
 #endif
 #ifdef PWR_WAKEUP_PIN2
-SYS_WKUP2 = NC,
+  SYS_WKUP2 = NC,
 #endif
 #ifdef PWR_WAKEUP_PIN3
-SYS_WKUP3 = NC,
+  SYS_WKUP3 = NC,
 #endif
 #ifdef PWR_WAKEUP_PIN4
-SYS_WKUP4 = NC,
+  SYS_WKUP4 = NC,
 #endif
 #ifdef PWR_WAKEUP_PIN5
-SYS_WKUP5 = NC,
+  SYS_WKUP5 = NC,
 #endif
 #ifdef PWR_WAKEUP_PIN6
-SYS_WKUP6 = NC,
+  SYS_WKUP6 = NC,
 #endif
 #ifdef PWR_WAKEUP_PIN7
-SYS_WKUP7 = NC,
+  SYS_WKUP7 = NC,
 #endif
 #ifdef PWR_WAKEUP_PIN8
-SYS_WKUP8 = NC,
+  SYS_WKUP8 = NC,
 #endif
 /* USB */
 #ifdef USBCON
-USB_OTG_FS_SOF = PA_8,
+  USB_OTG_FS_SOF      = PA_8,
-USB_OTG_FS_VBUS = PA_9,
+  USB_OTG_FS_VBUS     = PA_9,
-USB_OTG_FS_ID = PA_10,
+  USB_OTG_FS_ID       = PA_10,
-USB_OTG_FS_DM = PA_11,
+  USB_OTG_FS_DM       = PA_11,
-USB_OTG_FS_DP = PA_12,
+  USB_OTG_FS_DP       = PA_12,
-USB_OTG_HS_ULPI_D0 = PA_3,
+  USB_OTG_HS_ULPI_D0  = PA_3,
-USB_OTG_HS_SOF = PA_4,
+  USB_OTG_HS_SOF      = PA_4,
-USB_OTG_HS_ULPI_CK = PA_5,
+  USB_OTG_HS_ULPI_CK  = PA_5,
-USB_OTG_HS_ULPI_D1 = PB_0,
+  USB_OTG_HS_ULPI_D1  = PB_0,
-USB_OTG_HS_ULPI_D2 = PB_1,
+  USB_OTG_HS_ULPI_D2  = PB_1,
-USB_OTG_HS_ULPI_D7 = PB_5,
+  USB_OTG_HS_ULPI_D7  = PB_5,
-USB_OTG_HS_ULPI_D3 = PB_10,
+  USB_OTG_HS_ULPI_D3  = PB_10,
-USB_OTG_HS_ULPI_D4 = PB_11,
+  USB_OTG_HS_ULPI_D4  = PB_11,
-USB_OTG_HS_ID = PB_12,
+  USB_OTG_HS_ID       = PB_12,
-USB_OTG_HS_ULPI_D5 = PB_12,
+  USB_OTG_HS_ULPI_D5  = PB_12,
-USB_OTG_HS_ULPI_D6 = PB_13,
+  USB_OTG_HS_ULPI_D6  = PB_13,
-USB_OTG_HS_VBUS = PB_13,
+  USB_OTG_HS_VBUS     = PB_13,
-USB_OTG_HS_DM = PB_14,
+  USB_OTG_HS_DM       = PB_14,
-USB_OTG_HS_DP = PB_15,
+  USB_OTG_HS_DP       = PB_15,
-USB_OTG_HS_ULPI_STP = PC_0,
+  USB_OTG_HS_ULPI_STP = PC_0,
-USB_OTG_HS_ULPI_DIR = PC_2,
+  USB_OTG_HS_ULPI_DIR = PC_2,
-USB_OTG_HS_ULPI_NXT = PC_3,
+  USB_OTG_HS_ULPI_NXT = PC_3,
 #endif

buildroot/share/PlatformIO/variants/FYSETC_S6/PinNamesVar.h

@@ -1,30 +1,30 @@
 /* SYS_WKUP */
 #ifdef PWR_WAKEUP_PIN1
-SYS_WKUP1 = PA_0, /* SYS_WKUP0 */
+  SYS_WKUP1 = PA_0, /* SYS_WKUP0 */
 #endif
 #ifdef PWR_WAKEUP_PIN2
-SYS_WKUP2 = NC,
+  SYS_WKUP2 = NC,
 #endif
 #ifdef PWR_WAKEUP_PIN3
-SYS_WKUP3 = NC,
+  SYS_WKUP3 = NC,
 #endif
 #ifdef PWR_WAKEUP_PIN4
-SYS_WKUP4 = NC,
+  SYS_WKUP4 = NC,
 #endif
 #ifdef PWR_WAKEUP_PIN5
-SYS_WKUP5 = NC,
+  SYS_WKUP5 = NC,
 #endif
 #ifdef PWR_WAKEUP_PIN6
-SYS_WKUP6 = NC,
+  SYS_WKUP6 = NC,
 #endif
 #ifdef PWR_WAKEUP_PIN7
-SYS_WKUP7 = NC,
+  SYS_WKUP7 = NC,
 #endif
 #ifdef PWR_WAKEUP_PIN8
-SYS_WKUP8 = NC,
+  SYS_WKUP8 = NC,
 #endif
 /* USB */
 #ifdef USBCON
-USB_OTG_FS_DM = PA_11,
+  USB_OTG_FS_DM = PA_11,
-USB_OTG_FS_DP = PA_12,
+  USB_OTG_FS_DP = PA_12,
 #endif

buildroot/share/PlatformIO/variants/MARLIN_F407VE/PinNamesVar.h

@@ -1,50 +1,50 @@
 /* SYS_WKUP */
 #ifdef PWR_WAKEUP_PIN1
-SYS_WKUP1 = PA_0,
+  SYS_WKUP1 = PA_0,
 #endif
 #ifdef PWR_WAKEUP_PIN2
-SYS_WKUP2 = NC,
+  SYS_WKUP2 = NC,
 #endif
 #ifdef PWR_WAKEUP_PIN3
-SYS_WKUP3 = NC,
+  SYS_WKUP3 = NC,
 #endif
 #ifdef PWR_WAKEUP_PIN4
-SYS_WKUP4 = NC,
+  SYS_WKUP4 = NC,
 #endif
 #ifdef PWR_WAKEUP_PIN5
-SYS_WKUP5 = NC,
+  SYS_WKUP5 = NC,
 #endif
 #ifdef PWR_WAKEUP_PIN6
-SYS_WKUP6 = NC,
+  SYS_WKUP6 = NC,
 #endif
 #ifdef PWR_WAKEUP_PIN7
-SYS_WKUP7 = NC,
+  SYS_WKUP7 = NC,
 #endif
 #ifdef PWR_WAKEUP_PIN8
-SYS_WKUP8 = NC,
+  SYS_WKUP8 = NC,
 #endif
 /* USB */
 #ifdef USBCON
-USB_OTG_FS_SOF = PA_8,
+  USB_OTG_FS_SOF      = PA_8,
-USB_OTG_FS_VBUS = PA_9,
+  USB_OTG_FS_VBUS     = PA_9,
-USB_OTG_FS_ID = PA_10,
+  USB_OTG_FS_ID       = PA_10,
-USB_OTG_FS_DM = PA_11,
+  USB_OTG_FS_DM       = PA_11,
-USB_OTG_FS_DP = PA_12,
+  USB_OTG_FS_DP       = PA_12,
-USB_OTG_HS_ULPI_D0 = PA_3,
+  USB_OTG_HS_ULPI_D0  = PA_3,
-USB_OTG_HS_SOF = PA_4,
+  USB_OTG_HS_SOF      = PA_4,
-USB_OTG_HS_ULPI_CK = PA_5,
+  USB_OTG_HS_ULPI_CK  = PA_5,
-USB_OTG_HS_ULPI_D1 = PB_0,
+  USB_OTG_HS_ULPI_D1  = PB_0,
-USB_OTG_HS_ULPI_D2 = PB_1,
+  USB_OTG_HS_ULPI_D2  = PB_1,
-USB_OTG_HS_ULPI_D7 = PB_5,
+  USB_OTG_HS_ULPI_D7  = PB_5,
-USB_OTG_HS_ULPI_D3 = PB_10,
+  USB_OTG_HS_ULPI_D3  = PB_10,
-USB_OTG_HS_ULPI_D4 = PB_11,
+  USB_OTG_HS_ULPI_D4  = PB_11,
-USB_OTG_HS_ID = PB_12,
+  USB_OTG_HS_ID       = PB_12,
-USB_OTG_HS_ULPI_D5 = PB_12,
+  USB_OTG_HS_ULPI_D5  = PB_12,
-USB_OTG_HS_ULPI_D6 = PB_13,
+  USB_OTG_HS_ULPI_D6  = PB_13,
-USB_OTG_HS_VBUS = PB_13,
+  USB_OTG_HS_VBUS     = PB_13,
-USB_OTG_HS_DM = PB_14,
+  USB_OTG_HS_DM       = PB_14,
-USB_OTG_HS_DP = PB_15,
+  USB_OTG_HS_DP       = PB_15,
-USB_OTG_HS_ULPI_STP = PC_0,
+  USB_OTG_HS_ULPI_STP = PC_0,
-USB_OTG_HS_ULPI_DIR = PC_2,
+  USB_OTG_HS_ULPI_DIR = PC_2,
-USB_OTG_HS_ULPI_NXT = PC_3,
+  USB_OTG_HS_ULPI_NXT = PC_3,
 #endif

buildroot/share/PlatformIO/variants/STEVAL_F401VE/PinNamesVar.h

@@ -1,33 +1,33 @@
 /* SYS_WKUP */
 #ifdef PWR_WAKEUP_PIN1
-SYS_WKUP1 = PA_0,
+  SYS_WKUP1 = PA_0,
 #endif
 #ifdef PWR_WAKEUP_PIN2
-SYS_WKUP2 = NC,
+  SYS_WKUP2 = NC,
 #endif
 #ifdef PWR_WAKEUP_PIN3
-SYS_WKUP3 = NC,
+  SYS_WKUP3 = NC,
 #endif
 #ifdef PWR_WAKEUP_PIN4
-SYS_WKUP4 = NC,
+  SYS_WKUP4 = NC,
 #endif
 #ifdef PWR_WAKEUP_PIN5
-SYS_WKUP5 = NC,
+  SYS_WKUP5 = NC,
 #endif
 #ifdef PWR_WAKEUP_PIN6
-SYS_WKUP6 = NC,
+  SYS_WKUP6 = NC,
 #endif
 #ifdef PWR_WAKEUP_PIN7
-SYS_WKUP7 = NC,
+  SYS_WKUP7 = NC,
 #endif
 #ifdef PWR_WAKEUP_PIN8
-SYS_WKUP8 = NC,
+  SYS_WKUP8 = NC,
 #endif
 /* USB */
 #ifdef USBCON
-USB_OTG_FS_SOF = PA_8,
+  USB_OTG_FS_SOF  = PA_8,
-USB_OTG_FS_VBUS = PA_9,
+  USB_OTG_FS_VBUS = PA_9,
-USB_OTG_FS_ID = PA_10,
+  USB_OTG_FS_ID   = PA_10,
-USB_OTG_FS_DM = PA_11,
+  USB_OTG_FS_DM   = PA_11,
-USB_OTG_FS_DP = PA_12,
+  USB_OTG_FS_DP   = PA_12,
 #endif