CMS/Marlin
3
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Various cleanups ahead of digipot save

Browse Source
This commit is contained in:
Scott Lahteine 2017-06-24 22:23:45 -05:00
parent ece89bcf7a
commit 3c7bfe798d
5 changed files with 36 additions and 27 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
.travis.yml
View File

@ -202,9 +202,9 @@ script:
# #
# Enable COREYX (swapped) # Enable COREYX (swapped)
# #
- restore_configs #- restore_configs
- opt_enable COREYX #- opt_enable COREYX
- build_marlin #- build_marlin
# #
# #
######## Other Standard LCD/Panels ############## ######## Other Standard LCD/Panels ##############

6
Marlin/Marlin_main.cpp
View File

@ -9677,10 +9677,13 @@ inline void gcode_M503() {
*/ */
inline void gcode_M907() { inline void gcode_M907() {
#if HAS_DIGIPOTSS #if HAS_DIGIPOTSS
LOOP_XYZE(i) if (parser.seen(axis_codes[i])) stepper.digipot_current(i, parser.value_int()); LOOP_XYZE(i) if (parser.seen(axis_codes[i])) stepper.digipot_current(i, parser.value_int());
if (parser.seen('B')) stepper.digipot_current(4, parser.value_int()); if (parser.seen('B')) stepper.digipot_current(4, parser.value_int());
if (parser.seen('S')) for (uint8_t i = 0; i <= 4; i++) stepper.digipot_current(i, parser.value_int()); if (parser.seen('S')) for (uint8_t i = 0; i <= 4; i++) stepper.digipot_current(i, parser.value_int());
#elif HAS_MOTOR_CURRENT_PWM #elif HAS_MOTOR_CURRENT_PWM
#if PIN_EXISTS(MOTOR_CURRENT_PWM_XY) #if PIN_EXISTS(MOTOR_CURRENT_PWM_XY)
if (parser.seen('X')) stepper.digipot_current(0, parser.value_int()); if (parser.seen('X')) stepper.digipot_current(0, parser.value_int());
#endif #endif
@ -9690,13 +9693,16 @@ inline void gcode_M907() {
#if PIN_EXISTS(MOTOR_CURRENT_PWM_E) #if PIN_EXISTS(MOTOR_CURRENT_PWM_E)
if (parser.seen('E')) stepper.digipot_current(2, parser.value_int()); if (parser.seen('E')) stepper.digipot_current(2, parser.value_int());
#endif #endif
#endif #endif
#if ENABLED(DIGIPOT_I2C) #if ENABLED(DIGIPOT_I2C)
// this one uses actual amps in floating point // this one uses actual amps in floating point
LOOP_XYZE(i) if (parser.seen(axis_codes[i])) digipot_i2c_set_current(i, parser.value_float()); LOOP_XYZE(i) if (parser.seen(axis_codes[i])) digipot_i2c_set_current(i, parser.value_float());
// for each additional extruder (named B,C,D,E..., channels 4,5,6,7...) // for each additional extruder (named B,C,D,E..., channels 4,5,6,7...)
for (uint8_t i = NUM_AXIS; i < DIGIPOT_I2C_NUM_CHANNELS; i++) if (parser.seen('B' + i - (NUM_AXIS))) digipot_i2c_set_current(i, parser.value_float()); for (uint8_t i = NUM_AXIS; i < DIGIPOT_I2C_NUM_CHANNELS; i++) if (parser.seen('B' + i - (NUM_AXIS))) digipot_i2c_set_current(i, parser.value_float());
#endif #endif
#if ENABLED(DAC_STEPPER_CURRENT) #if ENABLED(DAC_STEPPER_CURRENT)
if (parser.seen('S')) { if (parser.seen('S')) {
const float dac_percent = parser.value_float(); const float dac_percent = parser.value_float();

29
Marlin/stepper.cpp
View File

@ -74,8 +74,8 @@ block_t* Stepper::current_block = NULL; // A pointer to the block currently bei
// private: // private:
unsigned char Stepper::last_direction_bits = 0; // The next stepping-bits to be output uint8_t Stepper::last_direction_bits = 0; // The next stepping-bits to be output
unsigned int Stepper::cleaning_buffer_counter = 0; uint16_t Stepper::cleaning_buffer_counter = 0;
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)
bool Stepper::locked_z_motor = false; bool Stepper::locked_z_motor = false;
@ -1447,11 +1447,11 @@ void Stepper::report_positions() {
#if HAS_DIGIPOTSS #if HAS_DIGIPOTSS
// From Arduino DigitalPotControl example // From Arduino DigitalPotControl example
void Stepper::digitalPotWrite(int address, int value) { void Stepper::digitalPotWrite(const int16_t address, const int16_t value) {
WRITE(DIGIPOTSS_PIN, LOW); // take the SS pin low to select the chip WRITE(DIGIPOTSS_PIN, LOW); // Take the SS pin low to select the chip
SPI.transfer(address); // send in the address and value via SPI: SPI.transfer(address); // Send the address and value via SPI
SPI.transfer(value); SPI.transfer(value);
WRITE(DIGIPOTSS_PIN, HIGH); // take the SS pin high to de-select the chip: WRITE(DIGIPOTSS_PIN, HIGH); // Take the SS pin high to de-select the chip
//delay(10); //delay(10);
} }
@ -1486,21 +1486,24 @@ void Stepper::report_positions() {
#endif #endif
} }
void Stepper::digipot_current(uint8_t driver, int current) { void Stepper::digipot_current(const uint8_t driver, const int current) {
#if HAS_DIGIPOTSS #if HAS_DIGIPOTSS
const uint8_t digipot_ch[] = DIGIPOT_CHANNELS; const uint8_t digipot_ch[] = DIGIPOT_CHANNELS;
digitalPotWrite(digipot_ch[driver], current); digitalPotWrite(digipot_ch[driver], current);
#elif HAS_MOTOR_CURRENT_PWM #elif HAS_MOTOR_CURRENT_PWM
#define _WRITE_CURRENT_PWM(P) analogWrite(P, 255L * current / (MOTOR_CURRENT_PWM_RANGE)) #define _WRITE_CURRENT_PWM(P) analogWrite(MOTOR_CURRENT_PWM_## P ##_PIN, 255L * current / (MOTOR_CURRENT_PWM_RANGE))
switch (driver) { switch (driver) {
#if PIN_EXISTS(MOTOR_CURRENT_PWM_XY) #if PIN_EXISTS(MOTOR_CURRENT_PWM_XY)
case 0: _WRITE_CURRENT_PWM(MOTOR_CURRENT_PWM_XY_PIN); break; case 0: _WRITE_CURRENT_PWM(XY); break;
#endif #endif
#if PIN_EXISTS(MOTOR_CURRENT_PWM_Z) #if PIN_EXISTS(MOTOR_CURRENT_PWM_Z)
case 1: _WRITE_CURRENT_PWM(MOTOR_CURRENT_PWM_Z_PIN); break; case 1: _WRITE_CURRENT_PWM(Z); break;
#endif #endif
#if PIN_EXISTS(MOTOR_CURRENT_PWM_E) #if PIN_EXISTS(MOTOR_CURRENT_PWM_E)
case 2: _WRITE_CURRENT_PWM(MOTOR_CURRENT_PWM_E_PIN); break; case 2: _WRITE_CURRENT_PWM(E); break;
#endif #endif
} }
#endif #endif
@ -1550,7 +1553,7 @@ void Stepper::report_positions() {
microstep_mode(i, microstep_modes[i]); microstep_mode(i, microstep_modes[i]);
} }
void Stepper::microstep_ms(uint8_t driver, int8_t ms1, int8_t ms2) { void Stepper::microstep_ms(const uint8_t driver, const int8_t ms1, const int8_t ms2) {
if (ms1 >= 0) switch (driver) { if (ms1 >= 0) switch (driver) {
case 0: WRITE(X_MS1_PIN, ms1); break; case 0: WRITE(X_MS1_PIN, ms1); break;
#if HAS_Y_MICROSTEPS #if HAS_Y_MICROSTEPS
@ -1601,7 +1604,7 @@ void Stepper::report_positions() {
} }
} }
void Stepper::microstep_mode(uint8_t driver, uint8_t stepping_mode) { void Stepper::microstep_mode(const uint8_t driver, const uint8_t stepping_mode) {
switch (stepping_mode) { switch (stepping_mode) {
case 1: microstep_ms(driver, MICROSTEP1); break; case 1: microstep_ms(driver, MICROSTEP1); break;
case 2: microstep_ms(driver, MICROSTEP2); break; case 2: microstep_ms(driver, MICROSTEP2); break;

18
Marlin/stepper.h
View File

@ -93,8 +93,8 @@ class Stepper {
private: private:
static unsigned char last_direction_bits; // The next stepping-bits to be output static uint8_t last_direction_bits; // The next stepping-bits to be output
static unsigned int cleaning_buffer_counter; static uint16_t cleaning_buffer_counter;
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)
static bool locked_z_motor, locked_z2_motor; static bool locked_z_motor, locked_z2_motor;
@ -243,20 +243,20 @@ class Stepper {
static FORCE_INLINE bool motor_direction(AxisEnum axis) { return TEST(last_direction_bits, axis); } static FORCE_INLINE bool motor_direction(AxisEnum axis) { return TEST(last_direction_bits, axis); }
#if HAS_DIGIPOTSS || HAS_MOTOR_CURRENT_PWM #if HAS_DIGIPOTSS || HAS_MOTOR_CURRENT_PWM
static void digitalPotWrite(int address, int value); static void digitalPotWrite(const int16_t address, const int16_t value);
static void digipot_current(uint8_t driver, int current); static void digipot_current(const uint8_t driver, const int16_t current);
#endif #endif
#if HAS_MICROSTEPS #if HAS_MICROSTEPS
static void microstep_ms(uint8_t driver, int8_t ms1, int8_t ms2); static void microstep_ms(const uint8_t driver, const int8_t ms1, const int8_t ms2);
static void microstep_mode(uint8_t driver, uint8_t stepping); static void microstep_mode(const uint8_t driver, const uint8_t stepping);
static void microstep_readings(); static void microstep_readings();
#endif #endif
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)
static FORCE_INLINE void set_homing_flag(bool state) { performing_homing = state; } static FORCE_INLINE void set_homing_flag(const bool state) { performing_homing = state; }
static FORCE_INLINE void set_z_lock(bool state) { locked_z_motor = state; } static FORCE_INLINE void set_z_lock(const bool state) { locked_z_motor = state; }
static FORCE_INLINE void set_z2_lock(bool state) { locked_z2_motor = state; } static FORCE_INLINE void set_z2_lock(const bool state) { locked_z2_motor = state; }
#endif #endif
#if ENABLED(BABYSTEPPING) #if ENABLED(BABYSTEPPING)