Merge branch 'Marlin_v1' of https://github.com/BorisLandoni/Marlin into BorisLandoni-Marlin_v1
Conflicts: Marlin/Configuration.h Marlin/language.h Marlin/pins.h
This commit is contained in:
Erik van der Zalm
commit
408169aef4
@ -37,6 +37,7 @@
|
||||
// 64 = STB V1.1
|
||||
// 7 = Ultimaker
|
||||
// 71 = Ultimaker (Older electronics. Pre 1.5.4. This is rare)
|
||||
// 77 = 3Drag Controller
|
||||
// 8 = Teensylu
|
||||
// 80 = Rumba
|
||||
// 81 = Printrboard (AT90USB1286)
|
||||
|
||||
@ -29,6 +29,9 @@
|
||||
#elif MOTHERBOARD == 80
|
||||
#define MACHINE_NAME "Rumba"
|
||||
#define FIRMWARE_URL "https://github.com/ErikZalm/Marlin/"
|
||||
#elif MOTHERBOARD == 77
|
||||
#define MACHINE_NAME "3Drag"
|
||||
#define FIRMWARE_URL "http://3dprint.elettronicain.it/"
|
||||
#else
|
||||
#ifdef CUSTOM_MENDEL_NAME
|
||||
#define MACHINE_NAME CUSTOM_MENDEL_NAME
|
||||
@ -1004,7 +1007,7 @@
|
||||
#if LANGUAGE_CHOICE == 7
|
||||
|
||||
// LCD Menu Messages
|
||||
#define WELCOME_MSG MACHINE_NAME " Pronto."
|
||||
#define WELCOME_MSG MACHINE_NAME " Pronta"
|
||||
#define MSG_SD_INSERTED "SD Card inserita"
|
||||
#define MSG_SD_REMOVED "SD Card rimossa"
|
||||
#define MSG_MAIN "Menu principale"
|
||||
@ -1016,7 +1019,7 @@
|
||||
#define MSG_PREHEAT_PLA_SETTINGS "Preris. PLA Conf"
|
||||
#define MSG_PREHEAT_ABS "Preriscalda ABS"
|
||||
#define MSG_PREHEAT_ABS_SETTINGS "Preris. ABS Conf"
|
||||
#define MSG_COOLDOWN "Rafredda"
|
||||
#define MSG_COOLDOWN "Raffredda"
|
||||
#define MSG_EXTRUDE "Estrudi"
|
||||
#define MSG_RETRACT "Ritrai"
|
||||
#define MSG_MOVE_AXIS "Muovi Asse"
|
||||
|
||||
223
Marlin/pins.h
223
Marlin/pins.h
@ -298,7 +298,7 @@
|
||||
* Arduino Mega pin assignment
|
||||
*
|
||||
****************************************************************************************/
|
||||
#if MOTHERBOARD == 3 || MOTHERBOARD == 33 || MOTHERBOARD == 34
|
||||
#if MOTHERBOARD == 3 || MOTHERBOARD == 33 || MOTHERBOARD == 34 || MOTHERBOARD == 77
|
||||
#define KNOWN_BOARD 1
|
||||
|
||||
//////////////////FIX THIS//////////////
|
||||
@ -308,47 +308,89 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
|
||||
// uncomment one of the following lines for RAMPS v1.3 or v1.0, comment both for v1.2 or 1.1
|
||||
// #define RAMPS_V_1_3
|
||||
// #define RAMPS_V_1_0
|
||||
|
||||
#if MOTHERBOARD == 33 || MOTHERBOARD == 34
|
||||
|
||||
#define LARGE_FLASH true
|
||||
#if MOTHERBOARD == 33 || MOTHERBOARD == 34 || MOTHERBOARD == 77
|
||||
|
||||
#define X_STEP_PIN 54
|
||||
#define X_DIR_PIN 55
|
||||
#define X_ENABLE_PIN 38
|
||||
#define X_MIN_PIN 3
|
||||
#define X_MAX_PIN 2
|
||||
#define LARGE_FLASH true
|
||||
|
||||
#if MOTHERBOARD == 77
|
||||
#define X_STEP_PIN 54
|
||||
#define X_DIR_PIN 55
|
||||
#define X_ENABLE_PIN 38
|
||||
#define X_MIN_PIN 3
|
||||
#define X_MAX_PIN -1 //2 //Max endstops default to disabled "-1", set to commented value to enable.
|
||||
|
||||
#define Y_STEP_PIN 60
|
||||
#define Y_DIR_PIN 61
|
||||
#define Y_ENABLE_PIN 56
|
||||
#define Y_MIN_PIN 14
|
||||
#define Y_MAX_PIN 15
|
||||
#define Y_STEP_PIN 60
|
||||
#define Y_DIR_PIN 61
|
||||
#define Y_ENABLE_PIN 56
|
||||
#define Y_MIN_PIN 14
|
||||
#define Y_MAX_PIN -1 //15
|
||||
|
||||
#define Z_STEP_PIN 46
|
||||
#define Z_DIR_PIN 48
|
||||
#define Z_ENABLE_PIN 62
|
||||
#define Z_MIN_PIN 18
|
||||
#define Z_MAX_PIN 19
|
||||
#define Z_STEP_PIN 46
|
||||
#define Z_DIR_PIN 48
|
||||
#define Z_ENABLE_PIN 63
|
||||
#define Z_MIN_PIN 18
|
||||
#define Z_MAX_PIN -1
|
||||
|
||||
#define Z2_STEP_PIN 36
|
||||
#define Z2_DIR_PIN 34
|
||||
#define Z2_ENABLE_PIN 30
|
||||
#define Z2_STEP_PIN 36
|
||||
#define Z2_DIR_PIN 34
|
||||
#define Z2_ENABLE_PIN 30
|
||||
|
||||
#define E0_STEP_PIN 26
|
||||
#define E0_DIR_PIN 28
|
||||
#define E0_ENABLE_PIN 24
|
||||
#define E0_STEP_PIN 26
|
||||
#define E0_DIR_PIN 28
|
||||
#define E0_ENABLE_PIN 24
|
||||
|
||||
#define E1_STEP_PIN 36
|
||||
#define E1_DIR_PIN 34
|
||||
#define E1_ENABLE_PIN 30
|
||||
#define E1_STEP_PIN 36
|
||||
#define E1_DIR_PIN 34
|
||||
#define E1_ENABLE_PIN 30
|
||||
|
||||
#define SDPOWER -1
|
||||
#define SDSS 53
|
||||
#define LED_PIN 13
|
||||
#define SDPOWER -1
|
||||
#define SDSS 25//53
|
||||
#define LED_PIN 13
|
||||
|
||||
#define BEEPER 33
|
||||
|
||||
#else
|
||||
|
||||
#define X_STEP_PIN 54
|
||||
#define X_DIR_PIN 55
|
||||
#define X_ENABLE_PIN 38
|
||||
#define X_MIN_PIN 3
|
||||
#define X_MAX_PIN 2
|
||||
|
||||
#define Y_STEP_PIN 60
|
||||
#define Y_DIR_PIN 61
|
||||
#define Y_ENABLE_PIN 56
|
||||
#define Y_MIN_PIN 14
|
||||
#define Y_MAX_PIN 15
|
||||
|
||||
#define Z_STEP_PIN 46
|
||||
#define Z_DIR_PIN 48
|
||||
#define Z_ENABLE_PIN 62
|
||||
#define Z_MIN_PIN 18
|
||||
#define Z_MAX_PIN 19
|
||||
|
||||
#define Z2_STEP_PIN 36
|
||||
#define Z2_DIR_PIN 34
|
||||
#define Z2_ENABLE_PIN 30
|
||||
|
||||
#define E0_STEP_PIN 26
|
||||
#define E0_DIR_PIN 28
|
||||
#define E0_ENABLE_PIN 24
|
||||
|
||||
#define E1_STEP_PIN 36
|
||||
#define E1_DIR_PIN 34
|
||||
#define E1_ENABLE_PIN 30
|
||||
|
||||
#define SDPOWER -1
|
||||
#define SDSS 53
|
||||
#define LED_PIN 13
|
||||
#endif
|
||||
|
||||
#if MOTHERBOARD == 33
|
||||
#define FAN_PIN 9 // (Sprinter config)
|
||||
@ -356,6 +398,10 @@
|
||||
#define FAN_PIN 4 // IO pin. Buffer needed
|
||||
#endif
|
||||
|
||||
#if MOTHERBOARD == 77
|
||||
#define FAN_PIN 8
|
||||
#endif
|
||||
|
||||
#define PS_ON_PIN 12
|
||||
|
||||
#if defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL)
|
||||
@ -365,18 +411,27 @@
|
||||
#endif
|
||||
|
||||
#define HEATER_0_PIN 10 // EXTRUDER 1
|
||||
|
||||
#if MOTHERBOARD == 33
|
||||
#if MOTHERBOARD == 33
|
||||
#define HEATER_1_PIN -1
|
||||
#else
|
||||
#define HEATER_1_PIN 9 // EXTRUDER 2 (FAN On Sprinter)
|
||||
#endif
|
||||
#define HEATER_2_PIN -1
|
||||
|
||||
#if MOTHERBOARD == 77
|
||||
#define HEATER_0_PIN 10
|
||||
#define HEATER_1_PIN 12
|
||||
#define HEATER_2_PIN 6
|
||||
#endif
|
||||
|
||||
#define HEATER_2_PIN -1
|
||||
#define TEMP_0_PIN 13 // ANALOG NUMBERING
|
||||
#define TEMP_1_PIN 15 // ANALOG NUMBERING
|
||||
#define TEMP_2_PIN -1 // ANALOG NUMBERING
|
||||
#define HEATER_BED_PIN 8 // BED
|
||||
#if MOTHERBOARD == 77
|
||||
#define HEATER_BED_PIN 9 // BED
|
||||
#else
|
||||
#define HEATER_BED_PIN 8 // BED
|
||||
#endif
|
||||
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
|
||||
|
||||
|
||||
@ -403,7 +458,7 @@
|
||||
#define LCD_PINS_RS 16
|
||||
#define LCD_PINS_ENABLE 17
|
||||
#define LCD_PINS_D4 23
|
||||
#define LCD_PINS_D5 25
|
||||
#define LCD_PINS_D5 25
|
||||
#define LCD_PINS_D6 27
|
||||
#define LCD_PINS_D7 29
|
||||
|
||||
@ -440,22 +495,23 @@
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
|
||||
#else //old style panel with shift register
|
||||
//arduino pin witch triggers an piezzo beeper
|
||||
#define BEEPER 33 // No Beeper added
|
||||
#define BEEPER 33 //No Beeper added
|
||||
|
||||
//buttons are attached to a shift register
|
||||
// Not wired this yet
|
||||
// Not wired this yet
|
||||
//#define SHIFT_CLK 38
|
||||
//#define SHIFT_LD 42
|
||||
//#define SHIFT_OUT 40
|
||||
//#define SHIFT_EN 17
|
||||
|
||||
#define LCD_PINS_RS 16
|
||||
|
||||
#define LCD_PINS_RS 16
|
||||
#define LCD_PINS_ENABLE 17
|
||||
#define LCD_PINS_D4 23
|
||||
#define LCD_PINS_D5 25
|
||||
#define LCD_PINS_D5 25
|
||||
#define LCD_PINS_D6 27
|
||||
#define LCD_PINS_D7 29
|
||||
#endif
|
||||
@ -463,57 +519,56 @@
|
||||
|
||||
#else // RAMPS_V_1_1 or RAMPS_V_1_2 as default (MOTHERBOARD == 3)
|
||||
|
||||
#define X_STEP_PIN 26
|
||||
#define X_DIR_PIN 28
|
||||
#define X_ENABLE_PIN 24
|
||||
#define X_MIN_PIN 3
|
||||
#define X_MAX_PIN -1 //2
|
||||
#define X_STEP_PIN 26
|
||||
#define X_DIR_PIN 28
|
||||
#define X_ENABLE_PIN 24
|
||||
#define X_MIN_PIN 3
|
||||
#define X_MAX_PIN -1 //2
|
||||
|
||||
#define Y_STEP_PIN 38
|
||||
#define Y_DIR_PIN 40
|
||||
#define Y_ENABLE_PIN 36
|
||||
#define Y_MIN_PIN 16
|
||||
#define Y_MAX_PIN -1 //17
|
||||
#define Y_STEP_PIN 38
|
||||
#define Y_DIR_PIN 40
|
||||
#define Y_ENABLE_PIN 36
|
||||
#define Y_MIN_PIN 16
|
||||
#define Y_MAX_PIN -1 //17
|
||||
|
||||
#define Z_STEP_PIN 44
|
||||
#define Z_DIR_PIN 46
|
||||
#define Z_ENABLE_PIN 42
|
||||
#define Z_MIN_PIN 18
|
||||
#define Z_MAX_PIN -1 //19
|
||||
#define Z_STEP_PIN 44
|
||||
#define Z_DIR_PIN 46
|
||||
#define Z_ENABLE_PIN 42
|
||||
#define Z_MIN_PIN 18
|
||||
#define Z_MAX_PIN -1 //19
|
||||
|
||||
#define E0_STEP_PIN 32
|
||||
#define E0_DIR_PIN 34
|
||||
#define E0_ENABLE_PIN 30
|
||||
#define E0_STEP_PIN 32
|
||||
#define E0_DIR_PIN 34
|
||||
#define E0_ENABLE_PIN 30
|
||||
|
||||
#define SDPOWER 48
|
||||
#define SDSS 53
|
||||
#define LED_PIN 13
|
||||
#define PS_ON_PIN -1
|
||||
#define KILL_PIN -1
|
||||
#define SDPOWER 48
|
||||
#define SDSS 53
|
||||
#define LED_PIN 13
|
||||
#define PS_ON_PIN -1
|
||||
#define KILL_PIN -1
|
||||
|
||||
#ifdef RAMPS_V_1_0 // RAMPS_V_1_0
|
||||
#define HEATER_0_PIN 12 // RAMPS 1.0
|
||||
#define HEATER_BED_PIN -1 // RAMPS 1.0
|
||||
#define FAN_PIN 11 // RAMPS 1.0
|
||||
#else // RAMPS_V_1_1 or RAMPS_V_1_2
|
||||
#define HEATER_0_PIN 10 // RAMPS 1.1
|
||||
#define HEATER_BED_PIN 8 // RAMPS 1.1
|
||||
#define FAN_PIN 9 // RAMPS 1.1
|
||||
#endif
|
||||
#ifdef RAMPS_V_1_0 // RAMPS_V_1_0
|
||||
#define HEATER_0_PIN 12 // RAMPS 1.0
|
||||
#define HEATER_BED_PIN -1 // RAMPS 1.0
|
||||
#define FAN_PIN 11 // RAMPS 1.0
|
||||
#else // RAMPS_V_1_1 or RAMPS_V_1_2
|
||||
#define HEATER_0_PIN 10 // RAMPS 1.1
|
||||
#define HEATER_BED_PIN 8 // RAMPS 1.1
|
||||
#define FAN_PIN 9 // RAMPS 1.1
|
||||
#endif
|
||||
#define HEATER_1_PIN -1
|
||||
#define HEATER_2_PIN -1
|
||||
#define TEMP_0_PIN 2 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
|
||||
#define TEMP_1_PIN -1
|
||||
#define TEMP_2_PIN -1
|
||||
#define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
|
||||
|
||||
#define HEATER_1_PIN -1
|
||||
#define HEATER_2_PIN -1
|
||||
#define TEMP_0_PIN 2 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
|
||||
#define TEMP_1_PIN -1
|
||||
#define TEMP_2_PIN -1
|
||||
#define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
|
||||
#endif // MOTHERBOARD == 33 || MOTHERBOARD == 34 || MOTHERBOARD == 77
|
||||
|
||||
#endif// MOTHERBOARD == 33 || MOTHERBOARD == 34
|
||||
|
||||
// SPI for Max6675 Thermocouple
|
||||
// SPI for Max6675 Thermocouple
|
||||
|
||||
#ifndef SDSUPPORT
|
||||
// these pins are defined in the SD library if building with SD support
|
||||
// these pins are defined in the SD library if building with SD support
|
||||
#define MAX_SCK_PIN 52
|
||||
#define MAX_MISO_PIN 50
|
||||
#define MAX_MOSI_PIN 51
|
||||
@ -522,7 +577,9 @@
|
||||
#define MAX6675_SS 49
|
||||
#endif
|
||||
|
||||
#endif//MOTHERBOARD == 3 || MOTHERBOARD == 33 || MOTHERBOARD == 34
|
||||
#endif //MOTHERBOARD == 3 || MOTHERBOARD == 33 || MOTHERBOARD == 34 || MOTHERBOARD == 77
|
||||
|
||||
|
||||
|
||||
/****************************************************************************************
|
||||
* Duemilanove w/ ATMega328P pin assignment
|
||||
|
||||
Loading…
Reference in New Issue
Block a user