CMS/Marlin
3
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Followup to stepper/planner refactor

Browse Source
This commit is contained in:
Scott Lahteine 2018-05-20 22:20:11 -05:00
parent 6dfbb39f83
commit 435ecb6b67
4 changed files with 20 additions and 20 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Marlin/src/module/planner.cpp
View File

@ -962,7 +962,7 @@ void Planner::reverse_pass() {
}
// The kernel called by recalculate() when scanning the plan from first to last entry.
void Planner::forward_pass_kernel(const block_t * const previous, block_t* const current, uint8_t block_index) {
void Planner::forward_pass_kernel(const block_t* const previous, block_t* const current, const uint8_t block_index) {
if (previous) {
// If the previous block is an acceleration block, too short to complete the full speed
// change, adjust the entry speed accordingly. Entry speeds have already been reset,
@ -2234,7 +2234,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
if (block->millimeters < 1.0) {
// Fast acos approximation, minus the error bar to be safe
float junction_theta = (RADIANS(-40) * sq(junction_cos_theta) - RADIANS(50)) * junction_cos_theta + RADIANS(90) - 0.18;
const float junction_theta = (RADIANS(-40) * sq(junction_cos_theta) - RADIANS(50)) * junction_cos_theta + RADIANS(90) - 0.18;
// If angle is greater than 135 degrees (octagon), find speed for approximate arc
if (junction_theta > RADIANS(135)) {

2
Marlin/src/module/planner.h
View File

@ -452,7 +452,7 @@ class Planner {
* - Wait for the number of spaces to open up in the planner
* - Return the first head block
*/
FORCE_INLINE static block_t* get_next_free_block(uint8_t &next_buffer_head, uint8_t count = 1) {
FORCE_INLINE static block_t* get_next_free_block(uint8_t &next_buffer_head, const uint8_t count=1) {
// Wait until there are enough slots free
while (moves_free() < count) { idle(); }

2
Marlin/src/module/stepper.cpp
View File

@ -2035,7 +2035,7 @@ int32_t Stepper::position(const AxisEnum axis) {
if (was_enabled) DISABLE_STEPPER_DRIVER_INTERRUPT();
#endif
int32_t v = count_position[axis];
const int32_t v = count_position[axis];
#ifdef __AVR__
// Reenable Stepper ISR

8
Marlin/src/module/stepper.h
View File

@ -98,8 +98,8 @@ class Stepper {
static int32_t bezier_A, // A coefficient in Bézier speed curve
bezier_B, // B coefficient in Bézier speed curve
bezier_C; // C coefficient in Bézier speed curve
static uint32_t bezier_F; // F coefficient in Bézier speed curve
static uint32_t bezier_AV; // AV coefficient in Bézier speed curve
static uint32_t bezier_F, // F coefficient in Bézier speed curve
bezier_AV; // AV coefficient in Bézier speed curve
#ifdef __AVR__
static bool A_negative; // If A coefficient was negative
#endif
@ -297,8 +297,8 @@ class Stepper {
NOLESS(step_rate, uint32_t(F_CPU / 500000U));
step_rate -= F_CPU / 500000; // Correct for minimal speed
if (step_rate >= (8 * 256)) { // higher step rate
uint8_t tmp_step_rate = (step_rate & 0x00FF);
uint16_t table_address = (uint16_t)&speed_lookuptable_fast[(uint8_t)(step_rate >> 8)][0],
const uint8_t tmp_step_rate = (step_rate & 0x00FF);
const uint16_t table_address = (uint16_t)&speed_lookuptable_fast[(uint8_t)(step_rate >> 8)][0],
gain = (uint16_t)pgm_read_word_near(table_address + 2);
timer = MultiU16X8toH16(tmp_step_rate, gain);
timer = (uint16_t)pgm_read_word_near(table_address) - timer;