From 44d50c2bd366cef1aa7b19689dc9dee5143634fc Mon Sep 17 00:00:00 2001
From: Scott Lahteine <github@thinkyhead.com>
Date: Sun, 4 Oct 2020 15:45:13 -0500
Subject: [PATCH] Move SF_ARC_FIX option

---
 Marlin/Configuration.h     | 12 ++----------
 Marlin/Configuration_adv.h |  1 +
 2 files changed, 3 insertions(+), 10 deletions(-)

diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index dec1a81be..e03887a9d 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -2304,9 +2304,6 @@
 // then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
 //#define TEMP_STAT_LEDS
 
-// SkeinForge sends the wrong arc G-codes when using Arc Point as fillet procedure
-//#define SF_ARC_FIX
-
 // Support for the BariCUDA Paste Extruder
 //#define BARICUDA
 
@@ -2392,17 +2389,12 @@
   #define PRINTER_EVENT_LEDS
 #endif
 
-/**
- * R/C SERVO support
- * Sponsored by TrinityLabs, Reworked by codexmas
- */
-
 /**
  * Number of servos
  *
  * For some servo-related options NUM_SERVOS will be set automatically.
  * Set this manually if there are extra servos needing manual control.
- * Leave undefined or set to 0 to entirely disable the servo subsystem.
+ * Set to 0 to turn off servo support.
  */
 //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command
 
@@ -2414,5 +2406,5 @@
 // Only power servos during movement, otherwise leave off to prevent jitter
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
-// Allow servo angle to be edited and saved to EEPROM
+// Edit servo angles with M281 and save to EEPROM with M500
 //#define EDITABLE_SERVO_ANGLES
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index b6ea64c2a..32a26a1e5 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -1768,6 +1768,7 @@
   #define N_ARC_CORRECTION       25 // Number of interpolated segments between corrections
   //#define ARC_P_CIRCLES           // Enable the 'P' parameter to specify complete circles
   //#define CNC_WORKSPACE_PLANES    // Allow G2/G3 to operate in XY, ZX, or YZ planes
+  //#define SF_ARC_FIX              // Enable only if using SkeinForge with "Arc Point" fillet procedure
 #endif
 
 // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.