adding back notes on servo power
This commit is contained in:
Bo Herrmannsen
parent
d9cd8e9e69
commit
46843bd927
@ -1,119 +0,0 @@
|
|||||||
# Supported Hardware
|
|
||||||
|
|
||||||
__Please note:__ We need more feedback from users weather their board is actually working!
|
|
||||||
|
|
||||||
Supported boards are listed under: [/Marlin/boards.h](/Marlin/boards.h)
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
##### RAMPS
|
|
||||||
|
|
||||||
http://reprap.org/wiki/RAMPS
|
|
||||||
|
|
||||||
```
|
|
||||||
#define BOARD_RAMPS_OLD 3 // MEGA/RAMPS up to 1.2
|
|
||||||
#define BOARD_RAMPS_13_EFB 33 // RAMPS 1.3 / 1.4 (Power outputs: Extruder, Fan, Bed)
|
|
||||||
#define BOARD_RAMPS_13_EEB 34 // RAMPS 1.3 / 1.4 (Power outputs: Extruder0, Extruder1, Bed)
|
|
||||||
#define BOARD_RAMPS_13_EFF 35 // RAMPS 1.3 / 1.4 (Power outputs: Extruder, Fan, Fan)
|
|
||||||
#define BOARD_RAMPS_13_EEF 36 // RAMPS 1.3 / 1.4 (Power outputs: Extruder0, Extruder1, Fan)
|
|
||||||
```
|
|
||||||
|
|
||||||
##### Generation 3 Electronics
|
|
||||||
|
|
||||||
http://reprap.org/wiki/Generation_3_Electronics
|
|
||||||
|
|
||||||
```
|
|
||||||
#define BOARD_GEN3_PLUS 9 // Gen3+
|
|
||||||
#define BOARD_GEN3_MONOLITHIC 22 // Gen3 Monolithic Electronics
|
|
||||||
```
|
|
||||||
|
|
||||||
##### Generation 6 Electronics
|
|
||||||
|
|
||||||
http://reprap.org/wiki/Generation_6_Electronics
|
|
||||||
|
|
||||||
```
|
|
||||||
#define BOARD_GEN6 5 // Gen6
|
|
||||||
#define BOARD_GEN6_DELUXE 51 // Gen6 deluxe
|
|
||||||
```
|
|
||||||
|
|
||||||
##### Generation 7 Electronics
|
|
||||||
|
|
||||||
http://reprap.org/wiki/Generation_7_Electronics
|
|
||||||
|
|
||||||
```
|
|
||||||
#define BOARD_GEN7_CUSTOM 10 // Gen7 custom (Alfons3 Version) "https://github.com/Alfons3/Generation_7_Electronics"
|
|
||||||
#define BOARD_GEN7_12 11 // Gen7 v1.1, v1.2
|
|
||||||
#define BOARD_GEN7_13 12 // Gen7 v1.3
|
|
||||||
#define BOARD_GEN7_14 13 // Gen7 v1.4
|
|
||||||
```
|
|
||||||
|
|
||||||
|
|
||||||
```
|
|
||||||
#define BOARD_CHEAPTRONIC 2 // Cheaptronic v1.0
|
|
||||||
#define BOARD_SETHI 20 // Sethi 3D_1
|
|
||||||
```
|
|
||||||
|
|
||||||
##### Sanguinololu
|
|
||||||
|
|
||||||
http://reprap.org/wiki/Sanguinololu
|
|
||||||
|
|
||||||
```
|
|
||||||
#define BOARD_SANGUINOLOLU_11 6 // Sanguinololu < 1.2
|
|
||||||
#define BOARD_SANGUINOLOLU_12 62 // Sanguinololu 1.2 and above
|
|
||||||
|
|
||||||
```
|
|
||||||
|
|
||||||
##### Melzi
|
|
||||||
|
|
||||||
http://reprap.org/wiki/Melzi
|
|
||||||
|
|
||||||
```
|
|
||||||
#define BOARD_MELZI 63 // Melzi
|
|
||||||
#define BOARD_MELZI_1284 66 // Melzi with ATmega1284 (MaKr3d version)
|
|
||||||
```
|
|
||||||
|
|
||||||
##### RUMBA
|
|
||||||
|
|
||||||
http://reprap.org/wiki/RUMBA
|
|
||||||
|
|
||||||
```
|
|
||||||
#define BOARD_RUMBA 80 // Rumba
|
|
||||||
```
|
|
||||||
|
|
||||||
##### Azteeg
|
|
||||||
|
|
||||||
- http://reprap.org/wiki/Azteeg_X1
|
|
||||||
- http://reprap.org/wiki/Azteeg_X3
|
|
||||||
|
|
||||||
|
|
||||||
```
|
|
||||||
#define BOARD_AZTEEG_X1 65 // Azteeg X1
|
|
||||||
#define BOARD_AZTEEG_X3 67 // Azteeg X3
|
|
||||||
#define BOARD_AZTEEG_X3_PRO 68 // Azteeg X3 Pro
|
|
||||||
```
|
|
||||||
|
|
||||||
#### Others
|
|
||||||
|
|
||||||
```
|
|
||||||
#define BOARD_DUEMILANOVE_328P 4 // Duemilanove w/ ATMega328P pin assignment
|
|
||||||
#define BOARD_STB_11 64 // STB V1.1
|
|
||||||
#define BOARD_ULTIMAKER 7 // Ultimaker
|
|
||||||
#define BOARD_ULTIMAKER_OLD 71 // Ultimaker (Older electronics. Pre 1.5.4. This is rare)
|
|
||||||
#define BOARD_ULTIMAIN_2 72 // Ultimainboard 2.x (Uses TEMP_SENSOR 20)
|
|
||||||
#define BOARD_3DRAG 77 // 3Drag Controller
|
|
||||||
#define BOARD_TEENSYLU 8 // Teensylu
|
|
||||||
#define BOARD_PRINTRBOARD 81 // Printrboard (AT90USB1286)
|
|
||||||
#define BOARD_BRAINWAVE 82 // Brainwave (AT90USB646)
|
|
||||||
#define BOARD_SAV_MKI 83 // SAV Mk-I (AT90USB1286)
|
|
||||||
#define BOARD_TEENSY2 84 // Teensy++2.0 (AT90USB1286) - CLI compile: DEFINES=AT90USBxx_TEENSYPP_ASSIGNMENTS HARDWARE_MOTHERBOARD=84 make
|
|
||||||
#define BOARD_MEGATRONICS 70 // Megatronics
|
|
||||||
#define BOARD_MEGATRONICS_2 701 // Megatronics v2.0
|
|
||||||
#define BOARD_MEGATRONICS_1 702 // Minitronics v1.0
|
|
||||||
#define BOARD_OMCA_A 90 // Alpha OMCA board
|
|
||||||
#define BOARD_OMCA 91 // Final OMCA board
|
|
||||||
#define BOARD_RAMBO 301 // Rambo
|
|
||||||
#define BOARD_ELEFU_3 21 // Elefu Ra Board (v3)
|
|
||||||
#define BOARD_5DPRINT 88 // 5DPrint D8 Driver Board
|
|
||||||
#define BOARD_LEAPFROG 999 // Leapfrog
|
|
||||||
```
|
|
||||||
9
Documentation/RampsServoPower.md
Normal file
9
Documentation/RampsServoPower.md
Normal file
@ -0,0 +1,9 @@
|
|||||||
|
|
||||||
|
|
||||||
|
__Note for RAMPS users:__
|
||||||
|
----------------------
|
||||||
|
|
||||||
|
-By default, RAMPS have no power on servo bus (if you happen to have a multimeter, check the voltage on servo power pins).
|
||||||
|
-In order to get the servo working, you need to supply 5V to 5V pin.. You can do it using your power supply (if it has a 5V output) or jumping the "Vcc" from Arduino to the 5V RAMPS rail.
|
||||||
|
-These 2 pins are located just between the Reset Button and the yellow fuses... There are marks in the board showing 5V and VCC.. just connect them..
|
||||||
|
-If jumping the arduino Vcc do RAMPS 5V rail, take care to not use a power hungry servo, otherwise you will cause a blackout in the arduino board ;-)
|
||||||
Loading…
Reference in New Issue
Block a user