Clean up fast_pwm.cpp
This commit is contained in:
Scott Lahteine
parent
49229d97db
commit
47fd74a98d
@ -1,250 +1,271 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#ifdef __AVR__
|
||||
|
||||
#include "../../inc/MarlinConfigPre.h"
|
||||
/**
|
||||
* get_pwm_timer
|
||||
* Grabs timer information and registers of the provided pin
|
||||
* returns Timer struct containing this information
|
||||
* Used by set_pwm_frequency, set_pwm_duty
|
||||
*
|
||||
*/
|
||||
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
|
||||
#include "HAL.h"
|
||||
|
||||
struct Timer {
|
||||
volatile uint8_t* TCCRnQ[3]; // max 3 TCCR registers per timer
|
||||
volatile uint16_t* OCRnQ[3]; // max 3 OCR registers per timer
|
||||
volatile uint16_t* ICRn; // max 1 ICR register per timer
|
||||
uint8_t n; // the timer number [0->5]
|
||||
uint8_t q; // the timer output [0->2] (A->C)
|
||||
};
|
||||
struct Timer {
|
||||
volatile uint8_t* TCCRnQ[3]; // max 3 TCCR registers per timer
|
||||
volatile uint16_t* OCRnQ[3]; // max 3 OCR registers per timer
|
||||
volatile uint16_t* ICRn; // max 1 ICR register per timer
|
||||
uint8_t n; // the timer number [0->5]
|
||||
uint8_t q; // the timer output [0->2] (A->C)
|
||||
};
|
||||
|
||||
Timer get_pwm_timer(pin_t pin) {
|
||||
uint8_t q = 0;
|
||||
switch (digitalPinToTimer(pin)) {
|
||||
// Protect reserved timers (TIMER0 & TIMER1)
|
||||
#ifdef TCCR0A
|
||||
#if !AVR_AT90USB1286_FAMILY
|
||||
case TIMER0A:
|
||||
#endif
|
||||
case TIMER0B:
|
||||
/**
|
||||
* get_pwm_timer
|
||||
* Get the timer information and register of the provided pin.
|
||||
* Return a Timer struct containing this information.
|
||||
* Used by set_pwm_frequency, set_pwm_duty
|
||||
*/
|
||||
Timer get_pwm_timer(const pin_t pin) {
|
||||
uint8_t q = 0;
|
||||
switch (digitalPinToTimer(pin)) {
|
||||
// Protect reserved timers (TIMER0 & TIMER1)
|
||||
#ifdef TCCR0A
|
||||
#if !AVR_AT90USB1286_FAMILY
|
||||
case TIMER0A:
|
||||
#endif
|
||||
#ifdef TCCR1A
|
||||
case TIMER1A: case TIMER1B:
|
||||
#endif
|
||||
break;
|
||||
#if defined(TCCR2) || defined(TCCR2A)
|
||||
#ifdef TCCR2
|
||||
case TIMER2: {
|
||||
case TIMER0B:
|
||||
#endif
|
||||
#ifdef TCCR1A
|
||||
case TIMER1A: case TIMER1B:
|
||||
#endif
|
||||
break;
|
||||
#if defined(TCCR2) || defined(TCCR2A)
|
||||
#ifdef TCCR2
|
||||
case TIMER2: {
|
||||
Timer timer = {
|
||||
/*TCCRnQ*/ { &TCCR2, nullptr, nullptr},
|
||||
/*OCRnQ*/ { (uint16_t*)&OCR2, nullptr, nullptr},
|
||||
/*ICRn*/ nullptr,
|
||||
/*n, q*/ 2, 0
|
||||
};
|
||||
}
|
||||
#elif defined TCCR2A
|
||||
#if ENABLED(USE_OCR2A_AS_TOP)
|
||||
case TIMER2A: break; // protect TIMER2A
|
||||
case TIMER2B: {
|
||||
Timer timer = {
|
||||
/*TCCRnQ*/ { &TCCR2, nullptr, nullptr},
|
||||
/*OCRnQ*/ { (uint16_t*)&OCR2, nullptr, nullptr},
|
||||
/*TCCRnQ*/ { &TCCR2A, &TCCR2B, nullptr},
|
||||
/*OCRnQ*/ { (uint16_t*)&OCR2A, (uint16_t*)&OCR2B, nullptr},
|
||||
/*ICRn*/ nullptr,
|
||||
/*n, q*/ 2, 0
|
||||
/*n, q*/ 2, 1
|
||||
};
|
||||
return timer;
|
||||
}
|
||||
#else
|
||||
case TIMER2B: ++q;
|
||||
case TIMER2A: {
|
||||
Timer timer = {
|
||||
/*TCCRnQ*/ { &TCCR2A, &TCCR2B, nullptr},
|
||||
/*OCRnQ*/ { (uint16_t*)&OCR2A, (uint16_t*)&OCR2B, nullptr},
|
||||
/*ICRn*/ nullptr,
|
||||
2, q
|
||||
};
|
||||
return timer;
|
||||
}
|
||||
#elif defined TCCR2A
|
||||
#if ENABLED(USE_OCR2A_AS_TOP)
|
||||
case TIMER2A: break; // protect TIMER2A
|
||||
case TIMER2B: {
|
||||
Timer timer = {
|
||||
/*TCCRnQ*/ { &TCCR2A, &TCCR2B, nullptr},
|
||||
/*OCRnQ*/ { (uint16_t*)&OCR2A, (uint16_t*)&OCR2B, nullptr},
|
||||
/*ICRn*/ nullptr,
|
||||
/*n, q*/ 2, 1
|
||||
};
|
||||
return timer;
|
||||
}
|
||||
#else
|
||||
case TIMER2B: ++q;
|
||||
case TIMER2A: {
|
||||
Timer timer = {
|
||||
/*TCCRnQ*/ { &TCCR2A, &TCCR2B, nullptr},
|
||||
/*OCRnQ*/ { (uint16_t*)&OCR2A, (uint16_t*)&OCR2B, nullptr},
|
||||
/*ICRn*/ nullptr,
|
||||
2, q
|
||||
};
|
||||
return timer;
|
||||
}
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
#ifdef TCCR3A
|
||||
case TIMER3C: ++q;
|
||||
case TIMER3B: ++q;
|
||||
case TIMER3A: {
|
||||
Timer timer = {
|
||||
/*TCCRnQ*/ { &TCCR3A, &TCCR3B, &TCCR3C},
|
||||
/*OCRnQ*/ { &OCR3A, &OCR3B, &OCR3C},
|
||||
/*ICRn*/ &ICR3,
|
||||
/*n, q*/ 3, q
|
||||
};
|
||||
return timer;
|
||||
}
|
||||
#endif
|
||||
#ifdef TCCR4A
|
||||
case TIMER4C: ++q;
|
||||
case TIMER4B: ++q;
|
||||
case TIMER4A: {
|
||||
Timer timer = {
|
||||
/*TCCRnQ*/ { &TCCR4A, &TCCR4B, &TCCR4C},
|
||||
/*OCRnQ*/ { &OCR4A, &OCR4B, &OCR4C},
|
||||
/*ICRn*/ &ICR4,
|
||||
/*n, q*/ 4, q
|
||||
};
|
||||
return timer;
|
||||
}
|
||||
#endif
|
||||
#ifdef TCCR5A
|
||||
case TIMER5C: ++q;
|
||||
case TIMER5B: ++q;
|
||||
case TIMER5A: {
|
||||
Timer timer = {
|
||||
/*TCCRnQ*/ { &TCCR5A, &TCCR5B, &TCCR5C},
|
||||
/*OCRnQ*/ { &OCR5A, &OCR5B, &OCR5C },
|
||||
/*ICRn*/ &ICR5,
|
||||
/*n, q*/ 5, q
|
||||
};
|
||||
return timer;
|
||||
}
|
||||
#endif
|
||||
}
|
||||
Timer timer = {
|
||||
/*TCCRnQ*/ { nullptr, nullptr, nullptr},
|
||||
/*OCRnQ*/ { nullptr, nullptr, nullptr},
|
||||
/*ICRn*/ nullptr,
|
||||
0, 0
|
||||
};
|
||||
return timer;
|
||||
#endif
|
||||
#ifdef TCCR3A
|
||||
case TIMER3C: ++q;
|
||||
case TIMER3B: ++q;
|
||||
case TIMER3A: {
|
||||
Timer timer = {
|
||||
/*TCCRnQ*/ { &TCCR3A, &TCCR3B, &TCCR3C},
|
||||
/*OCRnQ*/ { &OCR3A, &OCR3B, &OCR3C},
|
||||
/*ICRn*/ &ICR3,
|
||||
/*n, q*/ 3, q
|
||||
};
|
||||
return timer;
|
||||
}
|
||||
#endif
|
||||
#ifdef TCCR4A
|
||||
case TIMER4C: ++q;
|
||||
case TIMER4B: ++q;
|
||||
case TIMER4A: {
|
||||
Timer timer = {
|
||||
/*TCCRnQ*/ { &TCCR4A, &TCCR4B, &TCCR4C},
|
||||
/*OCRnQ*/ { &OCR4A, &OCR4B, &OCR4C},
|
||||
/*ICRn*/ &ICR4,
|
||||
/*n, q*/ 4, q
|
||||
};
|
||||
return timer;
|
||||
}
|
||||
#endif
|
||||
#ifdef TCCR5A
|
||||
case TIMER5C: ++q;
|
||||
case TIMER5B: ++q;
|
||||
case TIMER5A: {
|
||||
Timer timer = {
|
||||
/*TCCRnQ*/ { &TCCR5A, &TCCR5B, &TCCR5C},
|
||||
/*OCRnQ*/ { &OCR5A, &OCR5B, &OCR5C },
|
||||
/*ICRn*/ &ICR5,
|
||||
/*n, q*/ 5, q
|
||||
};
|
||||
return timer;
|
||||
}
|
||||
#endif
|
||||
}
|
||||
Timer timer = {
|
||||
/*TCCRnQ*/ { nullptr, nullptr, nullptr},
|
||||
/*OCRnQ*/ { nullptr, nullptr, nullptr},
|
||||
/*ICRn*/ nullptr,
|
||||
0, 0
|
||||
};
|
||||
return timer;
|
||||
}
|
||||
|
||||
void set_pwm_frequency(const pin_t pin, int f_desired) {
|
||||
Timer timer = get_pwm_timer(pin);
|
||||
if (timer.n == 0) return; // Don't proceed if protected timer or not recognised
|
||||
uint16_t size;
|
||||
if (timer.n == 2) size = 255; else size = 65535;
|
||||
void set_pwm_frequency(const pin_t pin, int f_desired) {
|
||||
Timer timer = get_pwm_timer(pin);
|
||||
if (timer.n == 0) return; // Don't proceed if protected timer or not recognised
|
||||
uint16_t size;
|
||||
if (timer.n == 2) size = 255; else size = 65535;
|
||||
|
||||
uint16_t res = 255; // resolution (TOP value)
|
||||
uint8_t j = 0; // prescaler index
|
||||
uint8_t wgm = 1; // waveform generation mode
|
||||
uint16_t res = 255; // resolution (TOP value)
|
||||
uint8_t j = 0; // prescaler index
|
||||
uint8_t wgm = 1; // waveform generation mode
|
||||
|
||||
// Calculating the prescaler and resolution to use to achieve closest frequency
|
||||
if (f_desired != 0) {
|
||||
int f = (F_CPU) / (2 * 1024 * size) + 1; // Initialize frequency as lowest (non-zero) achievable
|
||||
uint16_t prescaler[] = { 0, 1, 8, /*TIMER2 ONLY*/32, 64, /*TIMER2 ONLY*/128, 256, 1024 };
|
||||
// Calculating the prescaler and resolution to use to achieve closest frequency
|
||||
if (f_desired != 0) {
|
||||
int f = (F_CPU) / (2 * 1024 * size) + 1; // Initialize frequency as lowest (non-zero) achievable
|
||||
uint16_t prescaler[] = { 0, 1, 8, /*TIMER2 ONLY*/32, 64, /*TIMER2 ONLY*/128, 256, 1024 };
|
||||
|
||||
// loop over prescaler values
|
||||
for (uint8_t i = 1; i < 8; i++) {
|
||||
uint16_t res_temp_fast = 255, res_temp_phase_correct = 255;
|
||||
if (timer.n == 2) {
|
||||
// No resolution calculation for TIMER2 unless enabled USE_OCR2A_AS_TOP
|
||||
#if ENABLED(USE_OCR2A_AS_TOP)
|
||||
const uint16_t rtf = (F_CPU) / (prescaler[i] * f_desired);
|
||||
res_temp_fast = rtf - 1;
|
||||
res_temp_phase_correct = rtf / 2;
|
||||
#endif
|
||||
}
|
||||
else {
|
||||
// Skip TIMER2 specific prescalers when not TIMER2
|
||||
if (i == 3 || i == 5) continue;
|
||||
// loop over prescaler values
|
||||
for (uint8_t i = 1; i < 8; i++) {
|
||||
uint16_t res_temp_fast = 255, res_temp_phase_correct = 255;
|
||||
if (timer.n == 2) {
|
||||
// No resolution calculation for TIMER2 unless enabled USE_OCR2A_AS_TOP
|
||||
#if ENABLED(USE_OCR2A_AS_TOP)
|
||||
const uint16_t rtf = (F_CPU) / (prescaler[i] * f_desired);
|
||||
res_temp_fast = rtf - 1;
|
||||
res_temp_phase_correct = rtf / 2;
|
||||
}
|
||||
#endif
|
||||
}
|
||||
else {
|
||||
// Skip TIMER2 specific prescalers when not TIMER2
|
||||
if (i == 3 || i == 5) continue;
|
||||
const uint16_t rtf = (F_CPU) / (prescaler[i] * f_desired);
|
||||
res_temp_fast = rtf - 1;
|
||||
res_temp_phase_correct = rtf / 2;
|
||||
}
|
||||
|
||||
LIMIT(res_temp_fast, 1u, size);
|
||||
LIMIT(res_temp_phase_correct, 1u, size);
|
||||
// Calculate frequencies of test prescaler and resolution values
|
||||
const int f_temp_fast = (F_CPU) / (prescaler[i] * (1 + res_temp_fast)),
|
||||
f_temp_phase_correct = (F_CPU) / (2 * prescaler[i] * res_temp_phase_correct),
|
||||
f_diff = ABS(f - f_desired),
|
||||
f_fast_diff = ABS(f_temp_fast - f_desired),
|
||||
f_phase_diff = ABS(f_temp_phase_correct - f_desired);
|
||||
LIMIT(res_temp_fast, 1u, size);
|
||||
LIMIT(res_temp_phase_correct, 1u, size);
|
||||
// Calculate frequencies of test prescaler and resolution values
|
||||
const int f_temp_fast = (F_CPU) / (prescaler[i] * (1 + res_temp_fast)),
|
||||
f_temp_phase_correct = (F_CPU) / (2 * prescaler[i] * res_temp_phase_correct),
|
||||
f_diff = ABS(f - f_desired),
|
||||
f_fast_diff = ABS(f_temp_fast - f_desired),
|
||||
f_phase_diff = ABS(f_temp_phase_correct - f_desired);
|
||||
|
||||
// If FAST values are closest to desired f
|
||||
if (f_fast_diff < f_diff && f_fast_diff <= f_phase_diff) {
|
||||
// Remember this combination
|
||||
f = f_temp_fast;
|
||||
res = res_temp_fast;
|
||||
j = i;
|
||||
// Set the Wave Generation Mode to FAST PWM
|
||||
if (timer.n == 2) {
|
||||
wgm = (
|
||||
#if ENABLED(USE_OCR2A_AS_TOP)
|
||||
WGM2_FAST_PWM_OCR2A
|
||||
#else
|
||||
WGM2_FAST_PWM
|
||||
#endif
|
||||
);
|
||||
}
|
||||
else wgm = WGM_FAST_PWM_ICRn;
|
||||
// If FAST values are closest to desired f
|
||||
if (f_fast_diff < f_diff && f_fast_diff <= f_phase_diff) {
|
||||
// Remember this combination
|
||||
f = f_temp_fast;
|
||||
res = res_temp_fast;
|
||||
j = i;
|
||||
// Set the Wave Generation Mode to FAST PWM
|
||||
if (timer.n == 2) {
|
||||
wgm = (
|
||||
#if ENABLED(USE_OCR2A_AS_TOP)
|
||||
WGM2_FAST_PWM_OCR2A
|
||||
#else
|
||||
WGM2_FAST_PWM
|
||||
#endif
|
||||
);
|
||||
}
|
||||
// If PHASE CORRECT values are closes to desired f
|
||||
else if (f_phase_diff < f_diff) {
|
||||
f = f_temp_phase_correct;
|
||||
res = res_temp_phase_correct;
|
||||
j = i;
|
||||
// Set the Wave Generation Mode to PWM PHASE CORRECT
|
||||
if (timer.n == 2) {
|
||||
wgm = (
|
||||
#if ENABLED(USE_OCR2A_AS_TOP)
|
||||
WGM2_PWM_PC_OCR2A
|
||||
#else
|
||||
WGM2_PWM_PC
|
||||
#endif
|
||||
);
|
||||
}
|
||||
else wgm = WGM_PWM_PC_ICRn;
|
||||
else wgm = WGM_FAST_PWM_ICRn;
|
||||
}
|
||||
// If PHASE CORRECT values are closes to desired f
|
||||
else if (f_phase_diff < f_diff) {
|
||||
f = f_temp_phase_correct;
|
||||
res = res_temp_phase_correct;
|
||||
j = i;
|
||||
// Set the Wave Generation Mode to PWM PHASE CORRECT
|
||||
if (timer.n == 2) {
|
||||
wgm = (
|
||||
#if ENABLED(USE_OCR2A_AS_TOP)
|
||||
WGM2_PWM_PC_OCR2A
|
||||
#else
|
||||
WGM2_PWM_PC
|
||||
#endif
|
||||
);
|
||||
}
|
||||
else wgm = WGM_PWM_PC_ICRn;
|
||||
}
|
||||
}
|
||||
_SET_WGMnQ(timer.TCCRnQ, wgm);
|
||||
_SET_CSn(timer.TCCRnQ, j);
|
||||
}
|
||||
_SET_WGMnQ(timer.TCCRnQ, wgm);
|
||||
_SET_CSn(timer.TCCRnQ, j);
|
||||
|
||||
if (timer.n == 2) {
|
||||
#if ENABLED(USE_OCR2A_AS_TOP)
|
||||
_SET_OCRnQ(timer.OCRnQ, 0, res); // Set OCR2A value (TOP) = res
|
||||
#endif
|
||||
if (timer.n == 2) {
|
||||
#if ENABLED(USE_OCR2A_AS_TOP)
|
||||
_SET_OCRnQ(timer.OCRnQ, 0, res); // Set OCR2A value (TOP) = res
|
||||
#endif
|
||||
}
|
||||
else
|
||||
_SET_ICRn(timer.ICRn, res); // Set ICRn value (TOP) = res
|
||||
}
|
||||
|
||||
void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255*/, const bool invert/*=false*/) {
|
||||
// If v is 0 or v_size (max), digitalWrite to LOW or HIGH.
|
||||
// Note that digitalWrite also disables pwm output for us (sets COM bit to 0)
|
||||
if (v == 0)
|
||||
digitalWrite(pin, invert);
|
||||
else if (v == v_size)
|
||||
digitalWrite(pin, !invert);
|
||||
else {
|
||||
Timer timer = get_pwm_timer(pin);
|
||||
if (timer.n == 0) return; // Don't proceed if protected timer or not recognised
|
||||
// Set compare output mode to CLEAR -> SET or SET -> CLEAR (if inverted)
|
||||
_SET_COMnQ(timer.TCCRnQ, (timer.q
|
||||
#ifdef TCCR2
|
||||
+ (timer.q == 2) // COM20 is on bit 4 of TCCR2, thus requires q + 1 in the macro
|
||||
#endif
|
||||
), COM_CLEAR_SET + invert
|
||||
);
|
||||
|
||||
uint16_t top;
|
||||
if (timer.n == 2) { // if TIMER2
|
||||
top = (
|
||||
#if ENABLED(USE_OCR2A_AS_TOP)
|
||||
*timer.OCRnQ[0] // top = OCR2A
|
||||
#else
|
||||
255 // top = 0xFF (max)
|
||||
#endif
|
||||
);
|
||||
}
|
||||
else
|
||||
_SET_ICRn(timer.ICRn, res); // Set ICRn value (TOP) = res
|
||||
}
|
||||
|
||||
void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255*/, const bool invert/*=false*/) {
|
||||
// If v is 0 or v_size (max), digitalWrite to LOW or HIGH.
|
||||
// Note that digitalWrite also disables pwm output for us (sets COM bit to 0)
|
||||
if (v == 0)
|
||||
digitalWrite(pin, invert);
|
||||
else if (v == v_size)
|
||||
digitalWrite(pin, !invert);
|
||||
else {
|
||||
Timer timer = get_pwm_timer(pin);
|
||||
if (timer.n == 0) return; // Don't proceed if protected timer or not recognised
|
||||
// Set compare output mode to CLEAR -> SET or SET -> CLEAR (if inverted)
|
||||
_SET_COMnQ(timer.TCCRnQ, (timer.q
|
||||
#ifdef TCCR2
|
||||
+ (timer.q == 2) // COM20 is on bit 4 of TCCR2, thus requires q + 1 in the macro
|
||||
#endif
|
||||
), COM_CLEAR_SET + invert
|
||||
);
|
||||
|
||||
uint16_t top;
|
||||
if (timer.n == 2) { // if TIMER2
|
||||
top = (
|
||||
#if ENABLED(USE_OCR2A_AS_TOP)
|
||||
*timer.OCRnQ[0] // top = OCR2A
|
||||
#else
|
||||
255 // top = 0xFF (max)
|
||||
#endif
|
||||
);
|
||||
}
|
||||
else
|
||||
top = *timer.ICRn; // top = ICRn
|
||||
|
||||
_SET_OCRnQ(timer.OCRnQ, timer.q, v * float(top / v_size)); // Scale 8/16-bit v to top value
|
||||
}
|
||||
top = *timer.ICRn; // top = ICRn
|
||||
|
||||
_SET_OCRnQ(timer.OCRnQ, timer.q, v * float(top / v_size)); // Scale 8/16-bit v to top value
|
||||
}
|
||||
}
|
||||
|
||||
#endif // FAST_PWM_FAN
|
||||
#endif // __AVR__
|
||||
|
||||
Loading…
Reference in New Issue
Block a user