Allow BTT EXP-MOT be used with Displays that needs only EXP 1 (#20396)

Co-authored-by: ellensp <ellensp@ellensp-HP-ProBook-6470b.fritz.box>
Co-authored-by: Victor Mateus Oliveira <rhapsodyv@gmail.com>
This commit is contained in:
ellensp 2020-12-08 09:57:00 +13:00 committed by Scott Lahteine
parent 50247fc894
commit 47fd7fcaea

View File

@ -34,7 +34,11 @@
//#define HAS_BTT_EXP_MOT 1 //#define HAS_BTT_EXP_MOT 1
#if BOTH(HAS_WIRED_LCD,HAS_BTT_EXP_MOT) #if BOTH(HAS_WIRED_LCD,HAS_BTT_EXP_MOT)
#ERROR "Having a LCD on EXP1/EXP2 and a expanion motor module on EXP1/EXP2 is not possable." #if EITHER(CR10_STOCKDISPLAY,ENDER2_STOCKDISPLAY)
#define EXP_MOT_USE_EXP2_ONLY
#else
#error "Having a LCD that uses both EXP1/EXP2 and a expanion motor module on EXP1/EXP2 is not possible."
#endif
#endif #endif
// Ignore temp readings during development. // Ignore temp readings during development.
@ -133,36 +137,48 @@
* (M3DIR) 0.15 | · · | 0.17 (M3STP) (M3RX) 0.28 | · · | 1.30 (M3DIAG) * (M3DIR) 0.15 | · · | 0.17 (M3STP) (M3RX) 0.28 | · · | 1.30 (M3DIAG)
* ----- ----- * ----- -----
* EXP2 EXP1 * EXP2 EXP1
*
* NB In EXP_MOT_USE_EXP2_ONLY mode EXP1 is not used and M2EN and M3EN need to be jumpered to M1EN
*/ */
// M1 on Driver Expansion Module // M1 on Driver Expansion Module
#define E2_STEP_PIN EXPA2_05_PIN #define E2_STEP_PIN EXPA2_05_PIN
#define E2_DIR_PIN EXPA2_06_PIN #define E2_DIR_PIN EXPA2_06_PIN
#define E2_ENABLE_PIN EXPA2_04_PIN #define E2_ENABLE_PIN EXPA2_04_PIN
#define E2_DIAG_PIN EXPA1_06_PIN #ifndef EXP_MOT_USE_EXP2_ONLY
#define E2_CS_PIN EXPA1_05_PIN #define E2_DIAG_PIN EXPA1_06_PIN
#if HAS_TMC_UART #define E2_CS_PIN EXPA1_05_PIN
#define E2_SERIAL_TX_PIN EXPA1_05_PIN #if HAS_TMC_UART
#define E2_SERIAL_RX_PIN EXPA1_05_PIN #define E2_SERIAL_TX_PIN EXPA1_05_PIN
#define E2_SERIAL_RX_PIN EXPA1_05_PIN
#endif
#endif #endif
// M2 on Driver Expansion Module // M2 on Driver Expansion Module
#define E3_STEP_PIN EXPA2_08_PIN #define E3_STEP_PIN EXPA2_08_PIN
#define E3_DIR_PIN EXPA2_07_PIN #define E3_DIR_PIN EXPA2_07_PIN
#define E3_ENABLE_PIN EXPA1_03_PIN #ifndef EXP_MOT_USE_EXP2_ONLY
#define E3_DIAG_PIN EXPA1_08_PIN #define E3_ENABLE_PIN EXPA1_03_PIN
#define E3_CS_PIN EXPA1_07_PIN #define E3_DIAG_PIN EXPA1_08_PIN
#if HAS_TMC_UART #define E3_CS_PIN EXPA1_07_PIN
#define E3_SERIAL_TX_PIN EXPA1_07_PIN #if HAS_TMC_UART
#define E3_SERIAL_RX_PIN EXPA1_07_PIN #define E3_SERIAL_TX_PIN EXPA1_07_PIN
#define E3_SERIAL_RX_PIN EXPA1_07_PIN
#endif
#else
#define E3_ENABLE_PIN EXPA2_04_PIN
#endif #endif
// M3 on Driver Expansion Module // M3 on Driver Expansion Module
#define E4_STEP_PIN EXPA2_10_PIN #define E4_STEP_PIN EXPA2_10_PIN
#define E4_DIR_PIN EXPA2_09_PIN #define E4_DIR_PIN EXPA2_09_PIN
#define E4_ENABLE_PIN EXPA1_04_PIN #ifndef EXP_MOT_USE_EXP2_ONLY
#define E4_DIAG_PIN EXPA1_10_PIN #define E4_ENABLE_PIN EXPA1_04_PIN
#define E4_CS_PIN EXPA1_09_PIN #define E4_DIAG_PIN EXPA1_10_PIN
#if HAS_TMC_UART #define E4_CS_PIN EXPA1_09_PIN
#define E4_SERIAL_TX_PIN EXPA1_09_PIN #if HAS_TMC_UART
#define E4_SERIAL_RX_PIN EXPA1_09_PIN #define E4_SERIAL_TX_PIN EXPA1_09_PIN
#define E4_SERIAL_RX_PIN EXPA1_09_PIN
#endif
#else
#define E4_ENABLE_PIN EXPA2_04_PIN
#endif #endif
#endif // HAS_BTT_EXP_MOT #endif // HAS_BTT_EXP_MOT