CMS/Marlin
3
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Fix some THERMAL_PROTECTION_CHAMBER issues (#13678)

Browse Source
This commit is contained in:
Stephan 2019-05-07 02:55:01 +02:00 committed by Scott Lahteine
parent 23a8707ef1
commit 483822f3aa
77 changed files with 73 additions and 142 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
Marlin/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

2
Marlin/src/gcode/host/M115.cpp
View File

@ -152,7 +152,7 @@ void GcodeSuite::M115() {
// THERMAL_PROTECTION // THERMAL_PROTECTION
cap_line(PSTR("THERMAL_PROTECTION") cap_line(PSTR("THERMAL_PROTECTION")
#if BOTH(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED) #if ENABLED(THERMAL_PROTECTION_HOTENDS) && (ENABLED(THERMAL_PROTECTION_BED) || !HAS_HEATED_BED) && (ENABLED(THERMAL_PROTECTION_CHAMBER) || !HAS_HEATED_CHAMBER)
, true , true
#endif #endif
); );

138
Marlin/src/module/temperature.cpp
View File

@ -233,8 +233,8 @@ hotend_info_t Temperature::temp_hotend[HOTENDS]; // = { 0 }
#endif #endif
#if WATCH_CHAMBER #if WATCH_CHAMBER
heater_watch_t Temperature::watch_chamber = { 0 }; heater_watch_t Temperature::watch_chamber = { 0 };
millis_t Temperature::next_chamber_check_ms;
#endif #endif
millis_t Temperature::next_chamber_check_ms;
#endif // HAS_HEATED_CHAMBER #endif // HAS_HEATED_CHAMBER
#endif // HAS_TEMP_CHAMBER #endif // HAS_TEMP_CHAMBER
@ -1058,56 +1058,61 @@ void Temperature::manage_heater() {
} }
#endif // WATCH_BED #endif // WATCH_BED
#if DISABLED(PIDTEMPBED) do {
if (PENDING(ms, next_bed_check_ms)
#if DISABLED(PIDTEMPBED)
if (PENDING(ms, next_bed_check_ms)
#if BOTH(PROBING_HEATERS_OFF, BED_LIMIT_SWITCHING)
&& paused == last_pause_state
#endif
) break;
next_bed_check_ms = ms + BED_CHECK_INTERVAL;
#if BOTH(PROBING_HEATERS_OFF, BED_LIMIT_SWITCHING) #if BOTH(PROBING_HEATERS_OFF, BED_LIMIT_SWITCHING)
&& paused == last_pause_state last_pause_state = paused;
#endif #endif
) return;
next_bed_check_ms = ms + BED_CHECK_INTERVAL;
#if BOTH(PROBING_HEATERS_OFF, BED_LIMIT_SWITCHING)
last_pause_state = paused;
#endif #endif
#endif
#if HEATER_IDLE_HANDLER #if HEATER_IDLE_HANDLER
bed_idle.update(ms); bed_idle.update(ms);
#endif #endif
#if HAS_THERMALLY_PROTECTED_BED #if HAS_THERMALLY_PROTECTED_BED
thermal_runaway_protection(tr_state_machine_bed, temp_bed.current, temp_bed.target, -1, THERMAL_PROTECTION_BED_PERIOD, THERMAL_PROTECTION_BED_HYSTERESIS); thermal_runaway_protection(tr_state_machine_bed, temp_bed.current, temp_bed.target, -1, THERMAL_PROTECTION_BED_PERIOD, THERMAL_PROTECTION_BED_HYSTERESIS);
#endif #endif
#if HEATER_IDLE_HANDLER #if HEATER_IDLE_HANDLER
if (bed_idle.timed_out) { if (bed_idle.timed_out) {
temp_bed.soft_pwm_amount = 0; temp_bed.soft_pwm_amount = 0;
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
WRITE_HEATER_BED(LOW); WRITE_HEATER_BED(LOW);
#endif
}
else
#endif
{
#if ENABLED(PIDTEMPBED)
temp_bed.soft_pwm_amount = WITHIN(temp_bed.current, BED_MINTEMP, BED_MAXTEMP) ? (int)get_pid_output_bed() >> 1 : 0;
#else
// Check if temperature is within the correct band
if (WITHIN(temp_bed.current, BED_MINTEMP, BED_MAXTEMP)) {
#if ENABLED(BED_LIMIT_SWITCHING)
if (temp_bed.current >= temp_bed.target + BED_HYSTERESIS)
temp_bed.soft_pwm_amount = 0;
else if (temp_bed.current <= temp_bed.target - (BED_HYSTERESIS))
temp_bed.soft_pwm_amount = MAX_BED_POWER >> 1;
#else // !PIDTEMPBED && !BED_LIMIT_SWITCHING
temp_bed.soft_pwm_amount = temp_bed.current < temp_bed.target ? MAX_BED_POWER >> 1 : 0;
#endif #endif
} }
else { else
temp_bed.soft_pwm_amount = 0;
WRITE_HEATER_BED(LOW);
}
#endif #endif
} {
#if ENABLED(PIDTEMPBED)
temp_bed.soft_pwm_amount = WITHIN(temp_bed.current, BED_MINTEMP, BED_MAXTEMP) ? (int)get_pid_output_bed() >> 1 : 0;
#else
// Check if temperature is within the correct band
if (WITHIN(temp_bed.current, BED_MINTEMP, BED_MAXTEMP)) {
#if ENABLED(BED_LIMIT_SWITCHING)
if (temp_bed.current >= temp_bed.target + BED_HYSTERESIS)
temp_bed.soft_pwm_amount = 0;
else if (temp_bed.current <= temp_bed.target - (BED_HYSTERESIS))
temp_bed.soft_pwm_amount = MAX_BED_POWER >> 1;
#else // !PIDTEMPBED && !BED_LIMIT_SWITCHING
temp_bed.soft_pwm_amount = temp_bed.current < temp_bed.target ? MAX_BED_POWER >> 1 : 0;
#endif
}
else {
temp_bed.soft_pwm_amount = 0;
WRITE_HEATER_BED(LOW);
}
#endif
}
} while (false);
#endif // HAS_HEATED_BED #endif // HAS_HEATED_BED
#if HAS_HEATED_CHAMBER #if HAS_HEATED_CHAMBER
@ -1123,35 +1128,36 @@ void Temperature::manage_heater() {
#if WATCH_CHAMBER #if WATCH_CHAMBER
// Make sure temperature is increasing // Make sure temperature is increasing
if (watch_chamber.elapsed(ms)) { // Time to check the chamber? if (watch_chamber.elapsed(ms)) { // Time to check the chamber?
if (degChamber() < watch_chamber.target) // Failed to increase enough? if (degChamber() < watch_chamber.target) // Failed to increase enough?
_temp_error(-2, PSTR(MSG_T_HEATING_FAILED), TEMP_ERR_PSTR(MSG_HEATING_FAILED_LCD, -2)); _temp_error(-2, PSTR(MSG_T_HEATING_FAILED), TEMP_ERR_PSTR(MSG_HEATING_FAILED_LCD, -2));
else else
start_watching_chamber(); // Start again if the target is still far off start_watching_chamber(); // Start again if the target is still far off
} }
#endif // WATCH_CHAMBER #endif
if (PENDING(ms, next_chamber_check_ms)) return; if (ELAPSED(ms, next_chamber_check_ms)) {
next_chamber_check_ms = ms + CHAMBER_CHECK_INTERVAL; next_chamber_check_ms = ms + CHAMBER_CHECK_INTERVAL;
if (WITHIN(temp_chamber.current, CHAMBER_MINTEMP, CHAMBER_MAXTEMP)) { if (WITHIN(temp_chamber.current, CHAMBER_MINTEMP, CHAMBER_MAXTEMP)) {
#if ENABLED(CHAMBER_LIMIT_SWITCHING) #if ENABLED(CHAMBER_LIMIT_SWITCHING)
if (temp_chamber.current >= temp_chamber.target + TEMP_CHAMBER_HYSTERESIS) if (temp_chamber.current >= temp_chamber.target + TEMP_CHAMBER_HYSTERESIS)
temp_chamber.soft_pwm_amount = 0; temp_chamber.soft_pwm_amount = 0;
else if (temp_chamber.current <= temp_chamber.target - (TEMP_CHAMBER_HYSTERESIS)) else if (temp_chamber.current <= temp_chamber.target - (TEMP_CHAMBER_HYSTERESIS))
temp_chamber.soft_pwm_amount = MAX_CHAMBER_POWER >> 1; temp_chamber.soft_pwm_amount = MAX_CHAMBER_POWER >> 1;
#else #else
temp_chamber.soft_pwm_amount = temp_chamber.current < temp_chamber.target ? MAX_CHAMBER_POWER >> 1 : 0; temp_chamber.soft_pwm_amount = temp_chamber.current < temp_chamber.target ? MAX_CHAMBER_POWER >> 1 : 0;
#endif
}
else {
temp_chamber.soft_pwm_amount = 0;
WRITE_HEATER_CHAMBER(LOW);
}
#if ENABLED(THERMAL_PROTECTION_CHAMBER)
thermal_runaway_protection(tr_state_machine_chamber, temp_chamber.current, temp_chamber.target, -2, THERMAL_PROTECTION_CHAMBER_PERIOD, THERMAL_PROTECTION_CHAMBER_HYSTERESIS);
#endif #endif
} }
else {
temp_chamber.soft_pwm_amount = 0;
WRITE_HEATER_CHAMBER(LOW);
}
#if ENABLED(THERMAL_PROTECTION_CHAMBER)
thermal_runaway_protection(tr_state_machine_chamber, temp_chamber.current, temp_chamber.target, -2, THERMAL_PROTECTION_CHAMBER_PERIOD, THERMAL_PROTECTION_CHAMBER_HYSTERESIS);
#endif
// TODO: Implement true PID pwm // TODO: Implement true PID pwm
//temp_bed.soft_pwm_amount = WITHIN(temp_chamber.current, CHAMBER_MINTEMP, CHAMBER_MAXTEMP) ? (int)get_pid_output_chamber() >> 1 : 0; //temp_bed.soft_pwm_amount = WITHIN(temp_chamber.current, CHAMBER_MINTEMP, CHAMBER_MAXTEMP) ? (int)get_pid_output_chamber() >> 1 : 0;
@ -1788,8 +1794,8 @@ void Temperature::init() {
#if WATCH_CHAMBER #if WATCH_CHAMBER
/** /**
* Start Heating Sanity Check for hotends that are below * Start Heating Sanity Check for chamber that is below
* their target temperature by a configurable margin. * its target temperature by a configurable margin.
* This is called when the temperature is set. (M141, M191) * This is called when the temperature is set. (M141, M191)
*/ */
void Temperature::start_watching_chamber() { void Temperature::start_watching_chamber() {

1
config/default/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/3DFabXYZ/Migbot/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/AlephObjects/TAZ4/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/AliExpress/UM2pExt/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/Anet/A2/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/Anet/A2plus/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/Anet/A6/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/Anet/A8/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/AnyCubic/i3/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/ArmEd/Configuration_adv.h
View File

@ -112,7 +112,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/BIBO/TouchX/default/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/BQ/Hephestos/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/BQ/Hephestos_2/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/BQ/WITBOX/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/Cartesio/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/Creality/CR-10/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/Creality/CR-10S/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/Creality/CR-10_5S/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/Creality/CR-10mini/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/Creality/CR-8/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/Creality/Ender-2/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/Creality/Ender-3/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/Creality/Ender-4/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/Einstart-S/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/Felix/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/FlashForge/CreatorPro/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/FolgerTech/i3-2020/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/Formbot/Raptor/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/Formbot/T_Rex_2+/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/Formbot/T_Rex_3/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/Geeetech/A10M/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/Geeetech/A20M/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/Geeetech/MeCreator2/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/Infitary/i3-M508/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/JGAurora/A5/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/MakerParts/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/Malyan/M150/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/Malyan/M200/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/Micromake/C1/enhanced/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/Mks/Robin/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/Mks/Sbase/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/RapideLite/RL200/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/RigidBot/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/SCARA/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/Sanguinololu/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/TheBorg/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/TinyBoy2/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/Tronxy/X3A/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/Tronxy/X5S-2E/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/UltiMachine/Archim1/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/UltiMachine/Archim2/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/VORONDesign/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/Velleman/K8200/Configuration_adv.h
View File

@ -117,7 +117,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/Velleman/K8400/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/WASP/PowerWASP/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/Wanhao/Duplicator 6/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/delta/Anycubic/Kossel/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/delta/FLSUN/kossel/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/delta/MKS/SBASE/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/delta/Tevo Little Monster/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/delta/generic/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/delta/kossel_mini/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/delta/kossel_xl/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/gCreate/gMax1.5+/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/makibox/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/tvrrug/Round2/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false

1
config/examples/wt150/Configuration_adv.h
View File

@ -108,7 +108,6 @@
#define CHAMBER_MINTEMP 5 #define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING //#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false