MEDIA_MENU_AT_TOP for MarlinUI (#21925)

This commit is contained in:
Pascal de Bruijn 2021-05-20 13:35:38 +02:00 committed by Scott Lahteine
parent 1b45b3802a
commit 493eb446b7
3 changed files with 42 additions and 65 deletions

View File

@ -1301,6 +1301,8 @@
//#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted
//#define MEDIA_MENU_AT_TOP // Force the media menu to be listed on the top of the main menu
#define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27")
#if ENABLED(PRINTER_EVENT_LEDS) #if ENABLED(PRINTER_EVENT_LEDS)

View File

@ -254,6 +254,38 @@ void menu_main() {
START_MENU(); START_MENU();
BACK_ITEM(MSG_INFO_SCREEN); BACK_ITEM(MSG_INFO_SCREEN);
#if ENABLED(SDSUPPORT)
#if !defined(MEDIA_MENU_AT_TOP) && !HAS_ENCODER_WHEEL
#define MEDIA_MENU_AT_TOP
#endif
auto sdcard_menu_items = [&]{
#if ENABLED(MENU_ADDAUTOSTART)
ACTION_ITEM(MSG_RUN_AUTO_FILES, card.autofile_begin); // Run Auto Files
#endif
if (card_detected) {
if (!card_open) {
#if PIN_EXISTS(SD_DETECT)
GCODES_ITEM(MSG_CHANGE_MEDIA, PSTR("M21")); // M21 Change Media
#else // - or -
GCODES_ITEM(MSG_RELEASE_MEDIA, PSTR("M22")); // M22 Release Media
#endif
SUBMENU(MSG_MEDIA_MENU, MEDIA_MENU_GATEWAY); // Media Menu (or Password First)
}
}
else {
#if PIN_EXISTS(SD_DETECT)
ACTION_ITEM(MSG_NO_MEDIA, nullptr); // "No Media"
#else
GCODES_ITEM(MSG_ATTACH_MEDIA, PSTR("M21")); // M21 Attach Media
#endif
}
};
#endif
if (busy) { if (busy) {
#if MACHINE_CAN_PAUSE #if MACHINE_CAN_PAUSE
ACTION_ITEM(MSG_PAUSE_PRINT, ui.pause_print); ACTION_ITEM(MSG_PAUSE_PRINT, ui.pause_print);
@ -281,36 +313,9 @@ void menu_main() {
} }
else { else {
#if !HAS_ENCODER_WHEEL && ENABLED(SDSUPPORT) #if BOTH(SDSUPPORT, MEDIA_MENU_AT_TOP)
sdcard_menu_items();
// *** IF THIS SECTION IS CHANGED, REPRODUCE BELOW *** #endif
//
// Run Auto Files
//
#if ENABLED(MENU_ADDAUTOSTART)
ACTION_ITEM(MSG_RUN_AUTO_FILES, card.autofile_begin);
#endif
if (card_detected) {
if (!card_open) {
SUBMENU(MSG_MEDIA_MENU, MEDIA_MENU_GATEWAY);
#if PIN_EXISTS(SD_DETECT)
GCODES_ITEM(MSG_CHANGE_MEDIA, PSTR("M21"));
#else
GCODES_ITEM(MSG_RELEASE_MEDIA, PSTR("M22"));
#endif
}
}
else {
#if PIN_EXISTS(SD_DETECT)
ACTION_ITEM(MSG_NO_MEDIA, nullptr);
#else
GCODES_ITEM(MSG_ATTACH_MEDIA, PSTR("M21"));
#endif
}
#endif // !HAS_ENCODER_WHEEL && SDSUPPORT
if (TERN0(MACHINE_CAN_PAUSE, printingIsPaused())) if (TERN0(MACHINE_CAN_PAUSE, printingIsPaused()))
ACTION_ITEM(MSG_RESUME_PRINT, ui.resume_print); ACTION_ITEM(MSG_RESUME_PRINT, ui.resume_print);
@ -387,39 +392,9 @@ void menu_main() {
GCODES_ITEM(MSG_SWITCH_PS_ON, PSTR("M80")); GCODES_ITEM(MSG_SWITCH_PS_ON, PSTR("M80"));
#endif #endif
#if BOTH(HAS_ENCODER_WHEEL, SDSUPPORT) #if ENABLED(SDSUPPORT) && DISABLED(MEDIA_MENU_AT_TOP)
sdcard_menu_items();
if (!busy) { #endif
// *** IF THIS SECTION IS CHANGED, REPRODUCE ABOVE ***
//
// Autostart
//
#if ENABLED(MENU_ADDAUTOSTART)
ACTION_ITEM(MSG_RUN_AUTO_FILES, card.autofile_begin);
#endif
if (card_detected) {
if (!card_open) {
#if PIN_EXISTS(SD_DETECT)
GCODES_ITEM(MSG_CHANGE_MEDIA, PSTR("M21"));
#else
GCODES_ITEM(MSG_RELEASE_MEDIA, PSTR("M22"));
#endif
SUBMENU(MSG_MEDIA_MENU, MEDIA_MENU_GATEWAY);
}
}
else {
#if PIN_EXISTS(SD_DETECT)
ACTION_ITEM(MSG_NO_MEDIA, nullptr);
#else
GCODES_ITEM(MSG_ATTACH_MEDIA, PSTR("M21"));
#endif
}
}
#endif // HAS_ENCODER_WHEEL && SDSUPPORT
#if HAS_SERVICE_INTERVALS #if HAS_SERVICE_INTERVALS
static auto _service_reset = [](const int index) { static auto _service_reset = [](const int index) {

View File

@ -20,8 +20,8 @@ opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO LCD_LANGUAGE fr SAVED_POSITIONS 4 \
EXTRUDERS 5 TEMP_SENSOR_1 1 TEMP_SENSOR_2 5 TEMP_SENSOR_3 20 TEMP_SENSOR_4 1000 TEMP_SENSOR_BED 1 EXTRUDERS 5 TEMP_SENSOR_1 1 TEMP_SENSOR_2 5 TEMP_SENSOR_3 20 TEMP_SENSOR_4 1000 TEMP_SENSOR_BED 1
opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_VALIDATION ENABLE_LEVELING_FADE_HEIGHT SKEW_CORRECTION \ opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_VALIDATION ENABLE_LEVELING_FADE_HEIGHT SKEW_CORRECTION \
REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LIGHTWEIGHT_UI STATUS_MESSAGE_SCROLLING SHOW_CUSTOM_BOOTSCREEN BOOT_MARLIN_LOGO_SMALL \ REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LIGHTWEIGHT_UI STATUS_MESSAGE_SCROLLING SHOW_CUSTOM_BOOTSCREEN BOOT_MARLIN_LOGO_SMALL \
SDSUPPORT SDCARD_SORT_ALPHA USB_FLASH_DRIVE_SUPPORT AUTO_REPORT_SD_STATUS SCROLL_LONG_FILENAMES CANCEL_OBJECTS SOUND_MENU_ITEM \ SDSUPPORT SDCARD_SORT_ALPHA USB_FLASH_DRIVE_SUPPORT AUTO_REPORT_SD_STATUS SCROLL_LONG_FILENAMES MEDIA_MENU_AT_TOP \
EEPROM_SETTINGS EEPROM_CHITCHAT GCODE_MACROS CUSTOM_MENU_MAIN FREEZE_FEATURE \ EEPROM_SETTINGS EEPROM_CHITCHAT GCODE_MACROS CUSTOM_MENU_MAIN FREEZE_FEATURE CANCEL_OBJECTS SOUND_MENU_ITEM \
MULTI_NOZZLE_DUPLICATION CLASSIC_JERK LIN_ADVANCE EXTRA_LIN_ADVANCE_K QUICK_HOME \ MULTI_NOZZLE_DUPLICATION CLASSIC_JERK LIN_ADVANCE EXTRA_LIN_ADVANCE_K QUICK_HOME \
LCD_SET_PROGRESS_MANUALLY PRINT_PROGRESS_SHOW_DECIMALS SHOW_REMAINING_TIME \ LCD_SET_PROGRESS_MANUALLY PRINT_PROGRESS_SHOW_DECIMALS SHOW_REMAINING_TIME \
BABYSTEPPING BABYSTEP_XY NANODLP_Z_SYNC I2C_POSITION_ENCODERS M114_DETAIL BABYSTEPPING BABYSTEP_XY NANODLP_Z_SYNC I2C_POSITION_ENCODERS M114_DETAIL