From 49ca16c3fb103e8e29f64107ba664aa82917b9f1 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sun, 13 Sep 2020 18:06:14 -0500 Subject: [PATCH] heater_ind_t => heater_id_t --- Marlin/src/gcode/temp/M303.cpp | 2 +- Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp | 14 ++-- Marlin/src/lcd/dogm/status_screen_DOGM.cpp | 24 +++---- Marlin/src/lcd/extui/ui_api.cpp | 2 +- Marlin/src/module/temperature.cpp | 72 ++++++++++----------- Marlin/src/module/temperature.h | 14 ++-- 6 files changed, 64 insertions(+), 64 deletions(-) diff --git a/Marlin/src/gcode/temp/M303.cpp b/Marlin/src/gcode/temp/M303.cpp index 3340e4fa4..ccce09b4f 100644 --- a/Marlin/src/gcode/temp/M303.cpp +++ b/Marlin/src/gcode/temp/M303.cpp @@ -62,7 +62,7 @@ void GcodeSuite::M303() { #define SI TERN(PIDTEMPBED, H_BED, H_E0) #define EI TERN(PIDTEMP, HOTENDS - 1, H_BED) - const heater_ind_t e = (heater_ind_t)parser.intval('E'); + const heater_id_t e = (heater_id_t)parser.intval('E'); if (!WITHIN(e, SI, EI)) { SERIAL_ECHOLNPGM(STR_PID_BAD_EXTRUDER_NUM); TERN_(EXTENSIBLE_UI, ExtUI::onPidTuning(ExtUI::result_t::PID_BAD_EXTRUDER_NUM)); diff --git a/Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp b/Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp index 22dd63f68..81ba4653a 100644 --- a/Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp +++ b/Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp @@ -519,13 +519,13 @@ FORCE_INLINE void _draw_axis_value(const AxisEnum axis, const char *value, const } } -FORCE_INLINE void _draw_heater_status(const heater_ind_t heater, const char prefix, const bool blink) { +FORCE_INLINE void _draw_heater_status(const heater_id_t heater_id, const char prefix, const bool blink) { #if HAS_HEATED_BED - const bool isBed = heater < 0; - const float t1 = (isBed ? thermalManager.degBed() : thermalManager.degHotend(heater)), - t2 = (isBed ? thermalManager.degTargetBed() : thermalManager.degTargetHotend(heater)); + const bool isBed = heater_id < 0; + const float t1 = (isBed ? thermalManager.degBed() : thermalManager.degHotend(heater_id)), + t2 = (isBed ? thermalManager.degTargetBed() : thermalManager.degTargetHotend(heater_id)); #else - const float t1 = thermalManager.degHotend(heater), t2 = thermalManager.degTargetHotend(heater); + const float t1 = thermalManager.degHotend(heater_id), t2 = thermalManager.degTargetHotend(heater_id); #endif if (prefix >= 0) lcd_put_wchar(prefix); @@ -540,7 +540,7 @@ FORCE_INLINE void _draw_heater_status(const heater_ind_t heater, const char pref #if HAS_HEATED_BED isBed ? thermalManager.bed_idle.timed_out : #endif - thermalManager.hotend_idle[heater].timed_out + thermalManager.hotend_idle[heater_id].timed_out ); if (!blink && is_idle) { @@ -990,7 +990,7 @@ void MarlinUI::draw_status_screen() { void MarlinUI::draw_hotend_status(const uint8_t row, const uint8_t extruder) { if (row < LCD_HEIGHT) { lcd_moveto(LCD_WIDTH - 9, row); - _draw_heater_status((heater_ind_t)extruder, LCD_STR_THERMOMETER[0], get_blink()); + _draw_heater_status((heater_id_t)extruder, LCD_STR_THERMOMETER[0], get_blink()); } } diff --git a/Marlin/src/lcd/dogm/status_screen_DOGM.cpp b/Marlin/src/lcd/dogm/status_screen_DOGM.cpp index bdd9f2570..f668e453c 100644 --- a/Marlin/src/lcd/dogm/status_screen_DOGM.cpp +++ b/Marlin/src/lcd/dogm/status_screen_DOGM.cpp @@ -178,17 +178,17 @@ FORCE_INLINE void _draw_centered_temp(const int16_t temp, const uint8_t tx, cons #if DO_DRAW_HOTENDS // Draw hotend bitmap with current and target temperatures - FORCE_INLINE void _draw_hotend_status(const heater_ind_t heater, const bool blink) { + FORCE_INLINE void _draw_hotend_status(const heater_id_t heater_id, const bool blink) { #if !HEATER_IDLE_HANDLER UNUSED(blink); #endif - const bool isHeat = HOTEND_ALT(heater); + const bool isHeat = HOTEND_ALT(heater_id); - const uint8_t tx = STATUS_HOTEND_TEXT_X(heater); + const uint8_t tx = STATUS_HOTEND_TEXT_X(heater_id); - const float temp = thermalManager.degHotend(heater), - target = thermalManager.degTargetHotend(heater); + const float temp = thermalManager.degHotend(heater_id), + target = thermalManager.degTargetHotend(heater_id); #if DISABLED(STATUS_HOTEND_ANIM) #define STATIC_HOTEND true @@ -237,24 +237,24 @@ FORCE_INLINE void _draw_centered_temp(const int16_t temp, const uint8_t tx, cons #if ANIM_HOTEND // Draw hotend bitmap, either whole or split by the heating percent - const uint8_t hx = STATUS_HOTEND_X(heater), - bw = STATUS_HOTEND_BYTEWIDTH(heater); + const uint8_t hx = STATUS_HOTEND_X(heater_id), + bw = STATUS_HOTEND_BYTEWIDTH(heater_id); #if ENABLED(STATUS_HEAT_PERCENT) if (isHeat && tall <= BAR_TALL) { const uint8_t ph = STATUS_HEATERS_HEIGHT - 1 - tall; - u8g.drawBitmapP(hx, STATUS_HEATERS_Y, bw, ph, HOTEND_BITMAP(heater, false)); - u8g.drawBitmapP(hx, STATUS_HEATERS_Y + ph, bw, tall + 1, HOTEND_BITMAP(heater, true) + ph * bw); + u8g.drawBitmapP(hx, STATUS_HEATERS_Y, bw, ph, HOTEND_BITMAP(heater_id, false)); + u8g.drawBitmapP(hx, STATUS_HEATERS_Y + ph, bw, tall + 1, HOTEND_BITMAP(heater_id, true) + ph * bw); } else #endif - u8g.drawBitmapP(hx, STATUS_HEATERS_Y, bw, STATUS_HEATERS_HEIGHT, HOTEND_BITMAP(heater, isHeat)); + u8g.drawBitmapP(hx, STATUS_HEATERS_Y, bw, STATUS_HEATERS_HEIGHT, HOTEND_BITMAP(heater_id, isHeat)); #endif } // PAGE_CONTAINS if (PAGE_UNDER(7)) { #if HEATER_IDLE_HANDLER - const bool dodraw = (blink || !thermalManager.hotend_idle[heater].timed_out); + const bool dodraw = (blink || !thermalManager.hotend_idle[heater_id].timed_out); #else constexpr bool dodraw = true; #endif @@ -597,7 +597,7 @@ void MarlinUI::draw_status_screen() { // Extruders #if DO_DRAW_HOTENDS LOOP_L_N(e, MAX_HOTEND_DRAW) - _draw_hotend_status((heater_ind_t)e, blink); + _draw_hotend_status((heater_id_t)e, blink); #endif // Laser / Spindle diff --git a/Marlin/src/lcd/extui/ui_api.cpp b/Marlin/src/lcd/extui/ui_api.cpp index c2eab2ba0..53b7dc627 100644 --- a/Marlin/src/lcd/extui/ui_api.cpp +++ b/Marlin/src/lcd/extui/ui_api.cpp @@ -868,7 +868,7 @@ namespace ExtUI { } void startPIDTune(const float temp, extruder_t tool) { - thermalManager.PID_autotune(temp, (heater_ind_t)tool, 8, true); + thermalManager.PID_autotune(temp, (heater_id_t)tool, 8, true); } #endif diff --git a/Marlin/src/module/temperature.cpp b/Marlin/src/module/temperature.cpp index fbdd1fd6e..06864c6b9 100644 --- a/Marlin/src/module/temperature.cpp +++ b/Marlin/src/module/temperature.cpp @@ -377,7 +377,7 @@ volatile bool Temperature::raw_temps_ready = false; * Needs sufficient heater power to make some overshoot at target * temperature to succeed. */ - void Temperature::PID_autotune(const float &target, const heater_ind_t heater, const int8_t ncycles, const bool set_result/*=false*/) { + void Temperature::PID_autotune(const float &target, const heater_id_t heater_id, const int8_t ncycles, const bool set_result/*=false*/) { float current_temp = 0.0; int cycles = 0; bool heating = true; @@ -389,11 +389,11 @@ volatile bool Temperature::raw_temps_ready = false; PID_t tune_pid = { 0, 0, 0 }; float maxT = 0, minT = 10000; - const bool isbed = (heater == H_BED); + const bool isbed = (heater_id == H_BED); #if HAS_PID_FOR_BOTH #define GHV(B,H) (isbed ? (B) : (H)) - #define SHV(B,H) do{ if (isbed) temp_bed.soft_pwm_amount = B; else temp_hotend[heater].soft_pwm_amount = H; }while(0) + #define SHV(B,H) do{ if (isbed) temp_bed.soft_pwm_amount = B; else temp_hotend[heater_id].soft_pwm_amount = H; }while(0) #define ONHEATINGSTART() (isbed ? printerEventLEDs.onBedHeatingStart() : printerEventLEDs.onHotendHeatingStart()) #define ONHEATING(S,C,T) (isbed ? printerEventLEDs.onBedHeating(S,C,T) : printerEventLEDs.onHotendHeating(S,C,T)) #elif ENABLED(PIDTEMPBED) @@ -403,7 +403,7 @@ volatile bool Temperature::raw_temps_ready = false; #define ONHEATING(S,C,T) printerEventLEDs.onBedHeating(S,C,T) #else #define GHV(B,H) H - #define SHV(B,H) (temp_hotend[heater].soft_pwm_amount = H) + #define SHV(B,H) (temp_hotend[heater_id].soft_pwm_amount = H) #define ONHEATINGSTART() printerEventLEDs.onHotendHeatingStart() #define ONHEATING(S,C,T) printerEventLEDs.onHotendHeating(S,C,T) #endif @@ -427,7 +427,7 @@ volatile bool Temperature::raw_temps_ready = false; TERN_(HAS_AUTO_FAN, next_auto_fan_check_ms = next_temp_ms + 2500UL); - if (target > GHV(BED_MAX_TARGET, temp_range[heater].maxtemp - HOTEND_OVERSHOOT)) { + if (target > GHV(BED_MAX_TARGET, temp_range[heater_id].maxtemp - HOTEND_OVERSHOOT)) { SERIAL_ECHOLNPGM(STR_PID_TEMP_TOO_HIGH); TERN_(EXTENSIBLE_UI, ExtUI::onPidTuning(ExtUI::result_t::PID_TEMP_TOO_HIGH)); return; @@ -441,7 +441,7 @@ volatile bool Temperature::raw_temps_ready = false; SHV(bias = d = (MAX_BED_POWER) >> 1, bias = d = (PID_MAX) >> 1); #if ENABLED(PRINTER_EVENT_LEDS) - const float start_temp = GHV(temp_bed.celsius, temp_hotend[heater].celsius); + const float start_temp = GHV(temp_bed.celsius, temp_hotend[heater_id].celsius); LEDColor color = ONHEATINGSTART(); #endif @@ -457,7 +457,7 @@ volatile bool Temperature::raw_temps_ready = false; updateTemperaturesFromRawValues(); // Get the current temperature and constrain it - current_temp = GHV(temp_bed.celsius, temp_hotend[heater].celsius); + current_temp = GHV(temp_bed.celsius, temp_hotend[heater_id].celsius); NOLESS(maxT, current_temp); NOMORE(minT, current_temp); @@ -549,7 +549,7 @@ volatile bool Temperature::raw_temps_ready = false; // Report heater states every 2 seconds if (ELAPSED(ms, next_temp_ms)) { #if HAS_TEMP_SENSOR - print_heater_states(isbed ? active_extruder : heater); + print_heater_states(isbed ? active_extruder : heater_id); SERIAL_EOL(); #endif next_temp_ms = ms + 2000UL; @@ -564,10 +564,10 @@ volatile bool Temperature::raw_temps_ready = false; if (current_temp > watch_temp_target) heated = true; // - Flag if target temperature reached } else if (ELAPSED(ms, temp_change_ms)) // Watch timer expired - _temp_error(heater, str_t_heating_failed, GET_TEXT(MSG_HEATING_FAILED_LCD)); + _temp_error(heater_id, str_t_heating_failed, GET_TEXT(MSG_HEATING_FAILED_LCD)); } else if (current_temp < target - (MAX_OVERSHOOT_PID_AUTOTUNE)) // Heated, then temperature fell too far? - _temp_error(heater, str_t_thermal_runaway, GET_TEXT(MSG_THERMAL_RUNAWAY)); + _temp_error(heater_id, str_t_thermal_runaway, GET_TEXT(MSG_THERMAL_RUNAWAY)); } #endif } // every 2 seconds @@ -608,9 +608,9 @@ volatile bool Temperature::raw_temps_ready = false; }while(0) #define _SET_EXTRUDER_PID() do { \ - PID_PARAM(Kp, heater) = tune_pid.Kp; \ - PID_PARAM(Ki, heater) = scalePID_i(tune_pid.Ki); \ - PID_PARAM(Kd, heater) = scalePID_d(tune_pid.Kd); \ + PID_PARAM(Kp, heater_id) = tune_pid.Kp; \ + PID_PARAM(Ki, heater_id) = scalePID_i(tune_pid.Ki); \ + PID_PARAM(Kd, heater_id) = scalePID_d(tune_pid.Kd); \ updatePID(); }while(0) // Use the result? (As with "M303 U1") @@ -651,7 +651,7 @@ volatile bool Temperature::raw_temps_ready = false; * Class and Instance Methods */ -int16_t Temperature::getHeaterPower(const heater_ind_t heater_id) { +int16_t Temperature::getHeaterPower(const heater_id_t heater_id) { switch (heater_id) { #if HAS_HEATED_BED case H_BED: return temp_bed.soft_pwm_amount; @@ -758,7 +758,7 @@ int16_t Temperature::getHeaterPower(const heater_ind_t heater_id) { // Temperature Error Handlers // -inline void loud_kill(PGM_P const lcd_msg, const heater_ind_t heater) { +inline void loud_kill(PGM_P const lcd_msg, const heater_id_t heater_id) { marlin_state = MF_KILLED; #if USE_BEEPER for (uint8_t i = 20; i--;) { @@ -767,10 +767,10 @@ inline void loud_kill(PGM_P const lcd_msg, const heater_ind_t heater) { } WRITE(BEEPER_PIN, HIGH); #endif - kill(lcd_msg, HEATER_PSTR(heater)); + kill(lcd_msg, HEATER_PSTR(heater_id)); } -void Temperature::_temp_error(const heater_ind_t heater, PGM_P const serial_msg, PGM_P const lcd_msg) { +void Temperature::_temp_error(const heater_id_t heater_id, PGM_P const serial_msg, PGM_P const lcd_msg) { static uint8_t killed = 0; @@ -778,9 +778,9 @@ void Temperature::_temp_error(const heater_ind_t heater, PGM_P const serial_msg, SERIAL_ERROR_START(); serialprintPGM(serial_msg); SERIAL_ECHOPGM(STR_STOPPED_HEATER); - if (heater >= 0) - SERIAL_ECHO((int)heater); - else if (TERN0(HAS_HEATED_CHAMBER, heater == H_CHAMBER)) + if (heater_id >= 0) + SERIAL_ECHO((int)heater_id); + else if (TERN0(HAS_HEATED_CHAMBER, heater_id == H_CHAMBER)) SERIAL_ECHOPGM(STR_HEATER_CHAMBER); else SERIAL_ECHOPGM(STR_HEATER_BED); @@ -801,25 +801,25 @@ void Temperature::_temp_error(const heater_ind_t heater, PGM_P const serial_msg, if (ELAPSED(ms, expire_ms)) ++killed; break; case 2: - loud_kill(lcd_msg, heater); + loud_kill(lcd_msg, heater_id); ++killed; break; } #elif defined(BOGUS_TEMPERATURE_GRACE_PERIOD) UNUSED(killed); #else - if (!killed) { killed = 1; loud_kill(lcd_msg, heater); } + if (!killed) { killed = 1; loud_kill(lcd_msg, heater_id); } #endif } -void Temperature::max_temp_error(const heater_ind_t heater) { +void Temperature::max_temp_error(const heater_id_t heater_id) { TERN_(DWIN_CREALITY_LCD, Popup_Window_Temperature(1)); - _temp_error(heater, PSTR(STR_T_MAXTEMP), GET_TEXT(MSG_ERR_MAXTEMP)); + _temp_error(heater_id, PSTR(STR_T_MAXTEMP), GET_TEXT(MSG_ERR_MAXTEMP)); } -void Temperature::min_temp_error(const heater_ind_t heater) { +void Temperature::min_temp_error(const heater_id_t heater_id) { TERN_(DWIN_CREALITY_LCD, Popup_Window_Temperature(0)); - _temp_error(heater, PSTR(STR_T_MINTEMP), GET_TEXT(MSG_ERR_MINTEMP)); + _temp_error(heater_id, PSTR(STR_T_MINTEMP), GET_TEXT(MSG_ERR_MINTEMP)); } #if HAS_HOTEND @@ -1041,14 +1041,14 @@ void Temperature::manage_heater() { HOTEND_LOOP() { #if ENABLED(THERMAL_PROTECTION_HOTENDS) if (degHotend(e) > temp_range[e].maxtemp) - _temp_error((heater_ind_t)e, str_t_thermal_runaway, GET_TEXT(MSG_THERMAL_RUNAWAY)); + _temp_error((heater_id_t)e, str_t_thermal_runaway, GET_TEXT(MSG_THERMAL_RUNAWAY)); #endif TERN_(HEATER_IDLE_HANDLER, hotend_idle[e].update(ms)); #if ENABLED(THERMAL_PROTECTION_HOTENDS) // Check for thermal runaway - thermal_runaway_protection(tr_state_machine[e], temp_hotend[e].celsius, temp_hotend[e].target, (heater_ind_t)e, THERMAL_PROTECTION_PERIOD, THERMAL_PROTECTION_HYSTERESIS); + thermal_runaway_protection(tr_state_machine[e], temp_hotend[e].celsius, temp_hotend[e].target, (heater_id_t)e, THERMAL_PROTECTION_PERIOD, THERMAL_PROTECTION_HYSTERESIS); #endif temp_hotend[e].soft_pwm_amount = (temp_hotend[e].celsius > temp_range[e].mintemp || is_preheating(e)) && temp_hotend[e].celsius < temp_range[e].maxtemp ? (int)get_pid_output_hotend(e) >> 1 : 0; @@ -1058,7 +1058,7 @@ void Temperature::manage_heater() { if (watch_hotend[e].next_ms && ELAPSED(ms, watch_hotend[e].next_ms)) { // Time to check this extruder? if (degHotend(e) < watch_hotend[e].target) { // Failed to increase enough? TERN_(DWIN_CREALITY_LCD, Popup_Window_Temperature(0)); - _temp_error((heater_ind_t)e, str_t_heating_failed, GET_TEXT(MSG_HEATING_FAILED_LCD)); + _temp_error((heater_id_t)e, str_t_heating_failed, GET_TEXT(MSG_HEATING_FAILED_LCD)); } else // Start again if the target is still far off start_watching_hotend(e); @@ -1945,7 +1945,7 @@ void Temperature::init() { Temperature::tr_state_machine_t Temperature::tr_state_machine_chamber; // = { TRInactive, 0 }; #endif - void Temperature::thermal_runaway_protection(Temperature::tr_state_machine_t &sm, const float ¤t, const float &target, const heater_ind_t heater_id, const uint16_t period_seconds, const uint16_t hysteresis_degc) { + void Temperature::thermal_runaway_protection(Temperature::tr_state_machine_t &sm, const float ¤t, const float &target, const heater_id_t heater_id, const uint16_t period_seconds, const uint16_t hysteresis_degc) { static float tr_target_temperature[HOTENDS + 1] = { 0.0 }; @@ -2311,12 +2311,12 @@ void Temperature::readings_ready() { const bool heater_on = (temp_hotend[e].target > 0 || TERN0(PIDTEMP, temp_hotend[e].soft_pwm_amount) > 0 ); - if (rawtemp > temp_range[e].raw_max * tdir) max_temp_error((heater_ind_t)e); + if (rawtemp > temp_range[e].raw_max * tdir) max_temp_error((heater_id_t)e); if (heater_on && rawtemp < temp_range[e].raw_min * tdir && !is_preheating(e)) { #ifdef MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED if (++consecutive_low_temperature_error[e] >= MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED) #endif - min_temp_error((heater_ind_t)e); + min_temp_error((heater_id_t)e); } #ifdef MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED else @@ -2883,7 +2883,7 @@ void Temperature::tick() { #if ENABLED(SHOW_TEMP_ADC_VALUES) , const float r #endif - , const heater_ind_t e=INDEX_NONE + , const heater_id_t e=INDEX_NONE ) { char k; switch (e) { @@ -2974,10 +2974,10 @@ void Temperature::tick() { #if ENABLED(SHOW_TEMP_ADC_VALUES) , rawHotendTemp(e) #endif - , (heater_ind_t)e + , (heater_id_t)e ); #endif - SERIAL_ECHOPAIR(" @:", getHeaterPower((heater_ind_t)target_extruder)); + SERIAL_ECHOPAIR(" @:", getHeaterPower((heater_id_t)target_extruder)); #if HAS_HEATED_BED SERIAL_ECHOPAIR(" B@:", getHeaterPower(H_BED)); #endif @@ -2988,7 +2988,7 @@ void Temperature::tick() { HOTEND_LOOP() { SERIAL_ECHOPAIR(" @", e); SERIAL_CHAR(':'); - SERIAL_ECHO(getHeaterPower((heater_ind_t)e)); + SERIAL_ECHO(getHeaterPower((heater_id_t)e)); } #endif } diff --git a/Marlin/src/module/temperature.h b/Marlin/src/module/temperature.h index 2148f4cb6..37d1140f5 100644 --- a/Marlin/src/module/temperature.h +++ b/Marlin/src/module/temperature.h @@ -45,7 +45,7 @@ typedef enum : int8_t { INDEX_NONE = -5, H_PROBE, H_REDUNDANT, H_CHAMBER, H_BED, H_E0, H_E1, H_E2, H_E3, H_E4, H_E5, H_E6, H_E7 -} heater_ind_t; +} heater_id_t; // PID storage typedef struct { float Kp, Ki, Kd; } PID_t; @@ -701,7 +701,7 @@ class Temperature { /** * The software PWM power for a heater */ - static int16_t getHeaterPower(const heater_ind_t heater); + static int16_t getHeaterPower(const heater_id_t heater_id); /** * Switch off all heaters, set all target temperatures to 0 @@ -720,7 +720,7 @@ class Temperature { * Perform auto-tuning for hotend or bed in response to M303 */ #if HAS_PID_HEATING - static void PID_autotune(const float &target, const heater_ind_t hotend, const int8_t ncycles, const bool set_result=false); + static void PID_autotune(const float &target, const heater_id_t heater_id, const int8_t ncycles, const bool set_result=false); #if ENABLED(NO_FAN_SLOWING_IN_PID_TUNING) static bool adaptive_fan_slowing; @@ -811,9 +811,9 @@ class Temperature { TERN_(HAS_HEATED_CHAMBER, static float get_pid_output_chamber()); - static void _temp_error(const heater_ind_t e, PGM_P const serial_msg, PGM_P const lcd_msg); - static void min_temp_error(const heater_ind_t e); - static void max_temp_error(const heater_ind_t e); + static void _temp_error(const heater_id_t e, PGM_P const serial_msg, PGM_P const lcd_msg); + static void min_temp_error(const heater_id_t e); + static void max_temp_error(const heater_id_t e); #define HAS_THERMAL_PROTECTION (EITHER(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_CHAMBER) || HAS_THERMALLY_PROTECTED_BED) @@ -830,7 +830,7 @@ class Temperature { TERN_(HAS_THERMALLY_PROTECTED_BED, static tr_state_machine_t tr_state_machine_bed); TERN_(THERMAL_PROTECTION_CHAMBER, static tr_state_machine_t tr_state_machine_chamber); - static void thermal_runaway_protection(tr_state_machine_t &state, const float ¤t, const float &target, const heater_ind_t heater_id, const uint16_t period_seconds, const uint16_t hysteresis_degc); + static void thermal_runaway_protection(tr_state_machine_t &state, const float ¤t, const float &target, const heater_id_t heater_id, const uint16_t period_seconds, const uint16_t hysteresis_degc); #endif // HAS_THERMAL_PROTECTION };