Merge remote-tracking branch 'remotes/upstream/Development' into Development
This commit is contained in:
commit
4a7aca2736
@ -33,7 +33,7 @@ rambo.build.variant=rambo
|
||||
########################################
|
||||
sanguino.name=Sanguino
|
||||
|
||||
sanguino.upload.tool=ardunio:avrdude
|
||||
sanguino.upload.tool=arduino:avrdude
|
||||
sanguino.upload.protocol=stk500
|
||||
sanguino.upload.maximum_size=131072
|
||||
sanguino.upload.speed=57600
|
||||
|
@ -5,16 +5,9 @@
|
||||
#include "Marlin.h"
|
||||
#ifdef BLINKM
|
||||
|
||||
#if (ARDUINO >= 100)
|
||||
# include "Arduino.h"
|
||||
#else
|
||||
# include "WProgram.h"
|
||||
#endif
|
||||
|
||||
#include "BlinkM.h"
|
||||
|
||||
void SendColors(byte red, byte grn, byte blu)
|
||||
{
|
||||
void SendColors(byte red, byte grn, byte blu) {
|
||||
Wire.begin();
|
||||
Wire.beginTransmission(0x09);
|
||||
Wire.write('o'); //to disable ongoing script, only needs to be used once
|
||||
|
@ -2,13 +2,12 @@
|
||||
BlinkM.h
|
||||
Library header file for BlinkM library
|
||||
*/
|
||||
#if (ARDUINO >= 100)
|
||||
# include "Arduino.h"
|
||||
#if ARDUINO >= 100
|
||||
#include "Arduino.h"
|
||||
#else
|
||||
# include "WProgram.h"
|
||||
#include "WProgram.h"
|
||||
#endif
|
||||
|
||||
#include "Wire.h"
|
||||
|
||||
void SendColors(byte red, byte grn, byte blu);
|
||||
|
||||
|
@ -118,7 +118,10 @@ Here are some standard links for getting your machine calibrated:
|
||||
// 1010 is Pt1000 with 1k pullup (non standard)
|
||||
// 147 is Pt100 with 4k7 pullup
|
||||
// 110 is Pt100 with 1k pullup (non standard)
|
||||
// 999 is a Dummy Table. It will ALWAYS read 25C.. Use it for Testing or Development purposes. NEVER for production machine.
|
||||
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
||||
// Use it for Testing or Development purposes. NEVER for production machine.
|
||||
// #define DUMMY_THERMISTOR_998_VALUE 25
|
||||
// #define DUMMY_THERMISTOR_999_VALUE 100
|
||||
|
||||
#define TEMP_SENSOR_0 -1
|
||||
#define TEMP_SENSOR_1 -1
|
||||
@ -582,6 +585,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
|
||||
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click
|
||||
|
||||
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
|
||||
// http://reprap.org/wiki/PanelOne
|
||||
//#define PANEL_ONE
|
||||
|
||||
// The MaKr3d Makr-Panel with graphic controller and SD support
|
||||
// http://reprap.org/wiki/MaKr3d_MaKrPanel
|
||||
//#define MAKRPANEL
|
||||
@ -640,6 +647,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||
#define ENCODER_STEPS_PER_MENU_ITEM 1
|
||||
#endif
|
||||
|
||||
#if defined (PANEL_ONE)
|
||||
#define SDSUPPORT
|
||||
#define ULTIMAKERCONTROLLER
|
||||
#endif
|
||||
|
||||
#if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
|
||||
#define DOGLCD
|
||||
|
@ -1,5 +1,5 @@
|
||||
#ifndef CONFIG_STORE_H
|
||||
#define CONFIG_STORE_H
|
||||
#ifndef CONFIGURATIONSTORE_H
|
||||
#define CONFIGURATIONSTORE_H
|
||||
|
||||
#include "Configuration.h"
|
||||
|
||||
@ -19,4 +19,4 @@ void Config_ResetDefault();
|
||||
FORCE_INLINE void Config_RetrieveSettings() { Config_ResetDefault(); Config_PrintSettings(); }
|
||||
#endif
|
||||
|
||||
#endif // __CONFIG_STORE_H
|
||||
#endif //CONFIGURATIONSTORE_H
|
||||
|
@ -180,8 +180,8 @@ void manage_inactivity(bool ignore_stepper_queue=false);
|
||||
#define disable_e3() /* nothing */
|
||||
#endif
|
||||
|
||||
enum AxisEnum {X_AXIS=0, Y_AXIS=1, Z_AXIS=2, E_AXIS=3, X_HEAD=4, Y_HEAD=5};
|
||||
|
||||
enum AxisEnum {X_AXIS=0, Y_AXIS=1, Z_AXIS=2, E_AXIS=3, X_HEAD=4, Y_HEAD=5};
|
||||
//X_HEAD and Y_HEAD is used for systems that don't have a 1:1 relationship between X_AXIS and X Head movement, like CoreXY bots.
|
||||
|
||||
void FlushSerialRequestResend();
|
||||
void ClearToSend();
|
||||
|
@ -1720,6 +1720,7 @@ void process_commands()
|
||||
|
||||
#ifdef ENABLE_AUTO_BED_LEVELING
|
||||
case 29: // G29 Detailed Z-Probe, probes the bed at 3 or more points.
|
||||
// Override probing area by providing [F]ront [B]ack [L]eft [R]ight Grid[P]oints values
|
||||
{
|
||||
#if Z_MIN_PIN == -1
|
||||
#error "You must have a Z_MIN endstop in order to enable Auto Bed Leveling feature!!! Z_MIN_PIN must point to a valid hardware pin."
|
||||
@ -1753,9 +1754,19 @@ void process_commands()
|
||||
feedrate = homing_feedrate[Z_AXIS];
|
||||
#ifdef AUTO_BED_LEVELING_GRID
|
||||
// probe at the points of a lattice grid
|
||||
int left_probe_bed_position=LEFT_PROBE_BED_POSITION;
|
||||
int right_probe_bed_position=RIGHT_PROBE_BED_POSITION;
|
||||
int back_probe_bed_position=BACK_PROBE_BED_POSITION;
|
||||
int front_probe_bed_position=FRONT_PROBE_BED_POSITION;
|
||||
int auto_bed_leveling_grid_points=AUTO_BED_LEVELING_GRID_POINTS;
|
||||
if (code_seen('L')) left_probe_bed_position=(int)code_value();
|
||||
if (code_seen('R')) right_probe_bed_position=(int)code_value();
|
||||
if (code_seen('B')) back_probe_bed_position=(int)code_value();
|
||||
if (code_seen('F')) front_probe_bed_position=(int)code_value();
|
||||
if (code_seen('P')) auto_bed_leveling_grid_points=(int)code_value();
|
||||
|
||||
int xGridSpacing = (RIGHT_PROBE_BED_POSITION - LEFT_PROBE_BED_POSITION) / (AUTO_BED_LEVELING_GRID_POINTS-1);
|
||||
int yGridSpacing = (BACK_PROBE_BED_POSITION - FRONT_PROBE_BED_POSITION) / (AUTO_BED_LEVELING_GRID_POINTS-1);
|
||||
int xGridSpacing = (right_probe_bed_position - left_probe_bed_position) / (auto_bed_leveling_grid_points-1);
|
||||
int yGridSpacing = (back_probe_bed_position - front_probe_bed_position) / (auto_bed_leveling_grid_points-1);
|
||||
|
||||
|
||||
// solve the plane equation ax + by + d = z
|
||||
@ -1765,32 +1776,35 @@ void process_commands()
|
||||
// so Vx = -a Vy = -b Vz = 1 (we want the vector facing towards positive Z
|
||||
|
||||
// "A" matrix of the linear system of equations
|
||||
double eqnAMatrix[AUTO_BED_LEVELING_GRID_POINTS*AUTO_BED_LEVELING_GRID_POINTS*3];
|
||||
double eqnAMatrix[auto_bed_leveling_grid_points*auto_bed_leveling_grid_points*3];
|
||||
|
||||
// "B" vector of Z points
|
||||
double eqnBVector[AUTO_BED_LEVELING_GRID_POINTS*AUTO_BED_LEVELING_GRID_POINTS];
|
||||
double eqnBVector[auto_bed_leveling_grid_points*auto_bed_leveling_grid_points];
|
||||
|
||||
|
||||
|
||||
int probePointCounter = 0;
|
||||
bool zig = true;
|
||||
|
||||
for (int yProbe=FRONT_PROBE_BED_POSITION; yProbe <= BACK_PROBE_BED_POSITION; yProbe += yGridSpacing)
|
||||
for (int yProbe=front_probe_bed_position; yProbe <= back_probe_bed_position; yProbe += yGridSpacing)
|
||||
|
||||
{
|
||||
int xProbe, xInc;
|
||||
if (zig)
|
||||
{
|
||||
xProbe = LEFT_PROBE_BED_POSITION;
|
||||
//xEnd = RIGHT_PROBE_BED_POSITION;
|
||||
xProbe = left_probe_bed_position;
|
||||
//xEnd = right_probe_bed_position;
|
||||
xInc = xGridSpacing;
|
||||
zig = false;
|
||||
} else // zag
|
||||
{
|
||||
xProbe = RIGHT_PROBE_BED_POSITION;
|
||||
//xEnd = LEFT_PROBE_BED_POSITION;
|
||||
xProbe = right_probe_bed_position;
|
||||
//xEnd = left_probe_bed_position;
|
||||
xInc = -xGridSpacing;
|
||||
zig = true;
|
||||
}
|
||||
|
||||
for (int xCount=0; xCount < AUTO_BED_LEVELING_GRID_POINTS; xCount++)
|
||||
for (int xCount=0; xCount < auto_bed_leveling_grid_points; xCount++)
|
||||
{
|
||||
float z_before;
|
||||
if (probePointCounter == 0)
|
||||
@ -1822,9 +1836,9 @@ void process_commands()
|
||||
|
||||
eqnBVector[probePointCounter] = measured_z;
|
||||
|
||||
eqnAMatrix[probePointCounter + 0*AUTO_BED_LEVELING_GRID_POINTS*AUTO_BED_LEVELING_GRID_POINTS] = xProbe;
|
||||
eqnAMatrix[probePointCounter + 1*AUTO_BED_LEVELING_GRID_POINTS*AUTO_BED_LEVELING_GRID_POINTS] = yProbe;
|
||||
eqnAMatrix[probePointCounter + 2*AUTO_BED_LEVELING_GRID_POINTS*AUTO_BED_LEVELING_GRID_POINTS] = 1;
|
||||
eqnAMatrix[probePointCounter + 0*auto_bed_leveling_grid_points*auto_bed_leveling_grid_points] = xProbe;
|
||||
eqnAMatrix[probePointCounter + 1*auto_bed_leveling_grid_points*auto_bed_leveling_grid_points] = yProbe;
|
||||
eqnAMatrix[probePointCounter + 2*auto_bed_leveling_grid_points*auto_bed_leveling_grid_points] = 1;
|
||||
probePointCounter++;
|
||||
xProbe += xInc;
|
||||
}
|
||||
@ -1832,7 +1846,7 @@ void process_commands()
|
||||
clean_up_after_endstop_move();
|
||||
|
||||
// solve lsq problem
|
||||
double *plane_equation_coefficients = qr_solve(AUTO_BED_LEVELING_GRID_POINTS*AUTO_BED_LEVELING_GRID_POINTS, 3, eqnAMatrix, eqnBVector);
|
||||
double *plane_equation_coefficients = qr_solve(auto_bed_leveling_grid_points*auto_bed_leveling_grid_points, 3, eqnAMatrix, eqnBVector);
|
||||
|
||||
SERIAL_PROTOCOLPGM("Eqn coefficients: a: ");
|
||||
SERIAL_PROTOCOL(plane_equation_coefficients[0]);
|
||||
@ -4695,21 +4709,12 @@ bool setTargetedHotend(int code){
|
||||
|
||||
|
||||
float calculate_volumetric_multiplier(float diameter) {
|
||||
float area = .0;
|
||||
float radius = .0;
|
||||
|
||||
radius = diameter * .5;
|
||||
if (! volumetric_enabled || radius == 0) {
|
||||
area = 1;
|
||||
}
|
||||
else {
|
||||
area = M_PI * pow(radius, 2);
|
||||
}
|
||||
|
||||
return 1.0 / area;
|
||||
if (!volumetric_enabled || diameter == 0) return 1.0;
|
||||
float d2 = diameter * 0.5;
|
||||
return 1.0 / (M_PI * d2 * d2);
|
||||
}
|
||||
|
||||
void calculate_volumetric_multipliers() {
|
||||
for (int i=0; i<EXTRUDERS; i++)
|
||||
volumetric_multiplier[i] = calculate_volumetric_multiplier(filament_size[i]);
|
||||
volumetric_multiplier[i] = calculate_volumetric_multiplier(filament_size[i]);
|
||||
}
|
||||
|
@ -7,476 +7,383 @@
|
||||
|
||||
#ifdef SDSUPPORT
|
||||
|
||||
CardReader::CardReader() {
|
||||
filesize = 0;
|
||||
sdpos = 0;
|
||||
sdprinting = false;
|
||||
cardOK = false;
|
||||
saving = false;
|
||||
logging = false;
|
||||
workDirDepth = 0;
|
||||
file_subcall_ctr = 0;
|
||||
memset(workDirParents, 0, sizeof(workDirParents));
|
||||
|
||||
|
||||
CardReader::CardReader()
|
||||
{
|
||||
filesize = 0;
|
||||
sdpos = 0;
|
||||
sdprinting = false;
|
||||
cardOK = false;
|
||||
saving = false;
|
||||
logging = false;
|
||||
autostart_atmillis=0;
|
||||
workDirDepth = 0;
|
||||
file_subcall_ctr=0;
|
||||
memset(workDirParents, 0, sizeof(workDirParents));
|
||||
|
||||
autostart_stilltocheck=true; //the SD start is delayed, because otherwise the serial cannot answer fast enough to make contact with the host software.
|
||||
autostart_index=0;
|
||||
autostart_stilltocheck = true; //the SD start is delayed, because otherwise the serial cannot answer fast enough to make contact with the host software.
|
||||
autostart_index = 0;
|
||||
//power to SD reader
|
||||
#if SDPOWER > -1
|
||||
SET_OUTPUT(SDPOWER);
|
||||
WRITE(SDPOWER,HIGH);
|
||||
SET_OUTPUT(SDPOWER);
|
||||
WRITE(SDPOWER, HIGH);
|
||||
#endif //SDPOWER
|
||||
|
||||
autostart_atmillis=millis()+5000;
|
||||
|
||||
autostart_atmillis = millis() + 5000;
|
||||
}
|
||||
|
||||
char *createFilename(char *buffer,const dir_t &p) //buffer>12characters
|
||||
{
|
||||
char *pos=buffer;
|
||||
for (uint8_t i = 0; i < 11; i++)
|
||||
{
|
||||
if (p.name[i] == ' ')continue;
|
||||
if (i == 8)
|
||||
{
|
||||
*pos++='.';
|
||||
}
|
||||
*pos++=p.name[i];
|
||||
char *createFilename(char *buffer, const dir_t &p) { //buffer > 12characters
|
||||
char *pos = buffer;
|
||||
for (uint8_t i = 0; i < 11; i++) {
|
||||
if (p.name[i] == ' ') continue;
|
||||
if (i == 8) *pos++ = '.';
|
||||
*pos++ = p.name[i];
|
||||
}
|
||||
*pos++=0;
|
||||
*pos++ = 0;
|
||||
return buffer;
|
||||
}
|
||||
|
||||
|
||||
void CardReader::lsDive(const char *prepend, SdFile parent, const char * const match/*=NULL*/)
|
||||
{
|
||||
void CardReader::lsDive(const char *prepend, SdFile parent, const char * const match/*=NULL*/) {
|
||||
dir_t p;
|
||||
uint8_t cnt=0;
|
||||
|
||||
while (parent.readDir(p, longFilename) > 0)
|
||||
{
|
||||
if( DIR_IS_SUBDIR(&p) && lsAction!=LS_Count && lsAction!=LS_GetFilename) // hence LS_SerialPrint
|
||||
{
|
||||
uint8_t cnt = 0;
|
||||
|
||||
while (parent.readDir(p, longFilename) > 0) {
|
||||
if (DIR_IS_SUBDIR(&p) && lsAction != LS_Count && lsAction != LS_GetFilename) { // hence LS_SerialPrint
|
||||
char path[FILENAME_LENGTH*2];
|
||||
char lfilename[FILENAME_LENGTH];
|
||||
createFilename(lfilename,p);
|
||||
|
||||
path[0]=0;
|
||||
if(prepend[0]==0) //avoid leading / if already in prepend
|
||||
{
|
||||
strcat(path,"/");
|
||||
}
|
||||
strcat(path,prepend);
|
||||
strcat(path,lfilename);
|
||||
strcat(path,"/");
|
||||
|
||||
createFilename(lfilename, p);
|
||||
|
||||
path[0] = 0;
|
||||
if (prepend[0] == 0) strcat(path, "/"); //avoid leading / if already in prepend
|
||||
strcat(path, prepend);
|
||||
strcat(path, lfilename);
|
||||
strcat(path, "/");
|
||||
|
||||
//Serial.print(path);
|
||||
|
||||
|
||||
SdFile dir;
|
||||
if(!dir.open(parent,lfilename, O_READ))
|
||||
{
|
||||
if(lsAction==LS_SerialPrint)
|
||||
{
|
||||
if (!dir.open(parent, lfilename, O_READ)) {
|
||||
if (lsAction == LS_SerialPrint) {
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOLN(MSG_SD_CANT_OPEN_SUBDIR);
|
||||
SERIAL_ECHOLN(lfilename);
|
||||
}
|
||||
}
|
||||
lsDive(path,dir);
|
||||
lsDive(path, dir);
|
||||
//close done automatically by destructor of SdFile
|
||||
|
||||
|
||||
}
|
||||
else
|
||||
{
|
||||
else {
|
||||
char pn0 = p.name[0];
|
||||
if (pn0 == DIR_NAME_FREE) break;
|
||||
if (pn0 == DIR_NAME_DELETED || pn0 == '.' || pn0 == '_') continue;
|
||||
if (pn0 == DIR_NAME_DELETED || pn0 == '.') continue;
|
||||
char lf0 = longFilename[0];
|
||||
if (lf0 == '.' || lf0 == '_') continue;
|
||||
if (lf0 == '.') continue;
|
||||
|
||||
if (!DIR_IS_FILE_OR_SUBDIR(&p)) continue;
|
||||
filenameIsDir=DIR_IS_SUBDIR(&p);
|
||||
|
||||
|
||||
if(!filenameIsDir)
|
||||
{
|
||||
if(p.name[8]!='G') continue;
|
||||
if(p.name[9]=='~') continue;
|
||||
}
|
||||
//if(cnt++!=nr) continue;
|
||||
createFilename(filename,p);
|
||||
if(lsAction==LS_SerialPrint)
|
||||
{
|
||||
|
||||
filenameIsDir = DIR_IS_SUBDIR(&p);
|
||||
|
||||
if (!filenameIsDir && (p.name[8] != 'G' || p.name[9] == '~')) continue;
|
||||
|
||||
//if (cnt++ != nr) continue;
|
||||
createFilename(filename, p);
|
||||
if (lsAction == LS_SerialPrint) {
|
||||
SERIAL_PROTOCOL(prepend);
|
||||
SERIAL_PROTOCOLLN(filename);
|
||||
}
|
||||
else if(lsAction==LS_Count)
|
||||
{
|
||||
else if (lsAction == LS_Count) {
|
||||
nrFiles++;
|
||||
}
|
||||
else if(lsAction==LS_GetFilename)
|
||||
{
|
||||
}
|
||||
else if (lsAction == LS_GetFilename) {
|
||||
if (match != NULL) {
|
||||
if (strcasecmp(match, filename) == 0) return;
|
||||
}
|
||||
else if (cnt == nrFiles) return;
|
||||
cnt++;
|
||||
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void CardReader::ls()
|
||||
{
|
||||
lsAction=LS_SerialPrint;
|
||||
if(lsAction==LS_Count)
|
||||
nrFiles=0;
|
||||
|
||||
void CardReader::ls() {
|
||||
lsAction = LS_SerialPrint;
|
||||
root.rewind();
|
||||
lsDive("",root);
|
||||
lsDive("", root);
|
||||
}
|
||||
|
||||
|
||||
void CardReader::initsd()
|
||||
{
|
||||
void CardReader::initsd() {
|
||||
cardOK = false;
|
||||
if(root.isOpen())
|
||||
root.close();
|
||||
#ifdef SDSLOW
|
||||
if (!card.init(SPI_HALF_SPEED,SDSS)
|
||||
#if defined(LCD_SDSS) && (LCD_SDSS != SDSS)
|
||||
&& !card.init(SPI_HALF_SPEED,LCD_SDSS)
|
||||
if (root.isOpen()) root.close();
|
||||
|
||||
#ifdef SDSLOW
|
||||
#define SPI_SPEED SPI_HALF_SPEED
|
||||
#else
|
||||
#define SPI_SPEED SPI_FULL_SPEED
|
||||
#endif
|
||||
)
|
||||
#else
|
||||
if (!card.init(SPI_FULL_SPEED,SDSS)
|
||||
#if defined(LCD_SDSS) && (LCD_SDSS != SDSS)
|
||||
&& !card.init(SPI_FULL_SPEED,LCD_SDSS)
|
||||
#endif
|
||||
)
|
||||
#endif
|
||||
{
|
||||
|
||||
if (!card.init(SPI_SPEED,SDSS)
|
||||
#if defined(LCD_SDSS) && (LCD_SDSS != SDSS)
|
||||
&& !card.init(SPI_SPEED, LCD_SDSS)
|
||||
#endif
|
||||
) {
|
||||
//if (!card.init(SPI_HALF_SPEED,SDSS))
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOLNPGM(MSG_SD_INIT_FAIL);
|
||||
}
|
||||
else if (!volume.init(&card))
|
||||
{
|
||||
else if (!volume.init(&card)) {
|
||||
SERIAL_ERROR_START;
|
||||
SERIAL_ERRORLNPGM(MSG_SD_VOL_INIT_FAIL);
|
||||
}
|
||||
else if (!root.openRoot(&volume))
|
||||
{
|
||||
else if (!root.openRoot(&volume)) {
|
||||
SERIAL_ERROR_START;
|
||||
SERIAL_ERRORLNPGM(MSG_SD_OPENROOT_FAIL);
|
||||
}
|
||||
else
|
||||
{
|
||||
else {
|
||||
cardOK = true;
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOLNPGM(MSG_SD_CARD_OK);
|
||||
}
|
||||
workDir=root;
|
||||
curDir=&root;
|
||||
workDir = root;
|
||||
curDir = &root;
|
||||
/*
|
||||
if(!workDir.openRoot(&volume))
|
||||
{
|
||||
if (!workDir.openRoot(&volume)) {
|
||||
SERIAL_ECHOLNPGM(MSG_SD_WORKDIR_FAIL);
|
||||
}
|
||||
*/
|
||||
|
||||
}
|
||||
|
||||
void CardReader::setroot()
|
||||
{
|
||||
/*if(!workDir.openRoot(&volume))
|
||||
{
|
||||
void CardReader::setroot() {
|
||||
/*if (!workDir.openRoot(&volume)) {
|
||||
SERIAL_ECHOLNPGM(MSG_SD_WORKDIR_FAIL);
|
||||
}*/
|
||||
workDir=root;
|
||||
|
||||
curDir=&workDir;
|
||||
workDir = root;
|
||||
curDir = &workDir;
|
||||
}
|
||||
void CardReader::release()
|
||||
{
|
||||
|
||||
void CardReader::release() {
|
||||
sdprinting = false;
|
||||
cardOK = false;
|
||||
}
|
||||
|
||||
void CardReader::startFileprint()
|
||||
{
|
||||
if(cardOK)
|
||||
{
|
||||
void CardReader::startFileprint() {
|
||||
if (cardOK) {
|
||||
sdprinting = true;
|
||||
}
|
||||
}
|
||||
|
||||
void CardReader::pauseSDPrint()
|
||||
{
|
||||
if(sdprinting)
|
||||
{
|
||||
sdprinting = false;
|
||||
}
|
||||
void CardReader::pauseSDPrint() {
|
||||
if (sdprinting) sdprinting = false;
|
||||
}
|
||||
|
||||
|
||||
void CardReader::openLogFile(char* name)
|
||||
{
|
||||
void CardReader::openLogFile(char* name) {
|
||||
logging = true;
|
||||
openFile(name, false);
|
||||
}
|
||||
|
||||
void CardReader::getAbsFilename(char *t)
|
||||
{
|
||||
uint8_t cnt=0;
|
||||
*t='/';t++;cnt++;
|
||||
for(uint8_t i=0;i<workDirDepth;i++)
|
||||
{
|
||||
void CardReader::getAbsFilename(char *t) {
|
||||
uint8_t cnt = 0;
|
||||
*t = '/'; t++; cnt++;
|
||||
for (uint8_t i = 0; i < workDirDepth; i++) {
|
||||
workDirParents[i].getFilename(t); //SDBaseFile.getfilename!
|
||||
while(*t!=0 && cnt< MAXPATHNAMELENGTH)
|
||||
{t++;cnt++;} //crawl counter forward.
|
||||
while(*t && cnt < MAXPATHNAMELENGTH) { t++; cnt++; } //crawl counter forward.
|
||||
}
|
||||
if(cnt<MAXPATHNAMELENGTH-FILENAME_LENGTH)
|
||||
if (cnt < MAXPATHNAMELENGTH - FILENAME_LENGTH)
|
||||
file.getFilename(t);
|
||||
else
|
||||
t[0]=0;
|
||||
t[0] = 0;
|
||||
}
|
||||
|
||||
void CardReader::openFile(char* name,bool read, bool replace_current/*=true*/)
|
||||
{
|
||||
if(!cardOK)
|
||||
return;
|
||||
if(file.isOpen()) //replacing current file by new file, or subfile call
|
||||
{
|
||||
if(!replace_current)
|
||||
{
|
||||
if((int)file_subcall_ctr>(int)SD_PROCEDURE_DEPTH-1)
|
||||
{
|
||||
void CardReader::openFile(char* name, bool read, bool replace_current/*=true*/) {
|
||||
if (!cardOK) return;
|
||||
if (file.isOpen()) { //replacing current file by new file, or subfile call
|
||||
if (!replace_current) {
|
||||
if (file_subcall_ctr > SD_PROCEDURE_DEPTH - 1) {
|
||||
SERIAL_ERROR_START;
|
||||
SERIAL_ERRORPGM("trying to call sub-gcode files with too many levels. MAX level is:");
|
||||
SERIAL_ERRORLN(SD_PROCEDURE_DEPTH);
|
||||
kill();
|
||||
return;
|
||||
}
|
||||
|
||||
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPGM("SUBROUTINE CALL target:\"");
|
||||
SERIAL_ECHO(name);
|
||||
SERIAL_ECHOPGM("\" parent:\"");
|
||||
|
||||
|
||||
//store current filename and position
|
||||
getAbsFilename(filenames[file_subcall_ctr]);
|
||||
|
||||
|
||||
SERIAL_ECHO(filenames[file_subcall_ctr]);
|
||||
SERIAL_ECHOPGM("\" pos");
|
||||
SERIAL_ECHOLN(sdpos);
|
||||
filespos[file_subcall_ctr]=sdpos;
|
||||
filespos[file_subcall_ctr] = sdpos;
|
||||
file_subcall_ctr++;
|
||||
}
|
||||
else
|
||||
{
|
||||
else {
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPGM("Now doing file: ");
|
||||
SERIAL_ECHOLN(name);
|
||||
}
|
||||
file.close();
|
||||
}
|
||||
else //opening fresh file
|
||||
{
|
||||
file_subcall_ctr=0; //resetting procedure depth in case user cancels print while in procedure
|
||||
else { //opening fresh file
|
||||
file_subcall_ctr = 0; //resetting procedure depth in case user cancels print while in procedure
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPGM("Now fresh file: ");
|
||||
SERIAL_ECHOLN(name);
|
||||
}
|
||||
sdprinting = false;
|
||||
|
||||
|
||||
|
||||
SdFile myDir;
|
||||
curDir=&root;
|
||||
char *fname=name;
|
||||
|
||||
char *dirname_start,*dirname_end;
|
||||
if(name[0]=='/')
|
||||
{
|
||||
dirname_start=strchr(name,'/')+1;
|
||||
while(dirname_start>0)
|
||||
{
|
||||
dirname_end=strchr(dirname_start,'/');
|
||||
//SERIAL_ECHO("start:");SERIAL_ECHOLN((int)(dirname_start-name));
|
||||
//SERIAL_ECHO("end :");SERIAL_ECHOLN((int)(dirname_end-name));
|
||||
if(dirname_end>0 && dirname_end>dirname_start)
|
||||
{
|
||||
curDir = &root;
|
||||
char *fname = name;
|
||||
|
||||
char *dirname_start, *dirname_end;
|
||||
if (name[0] == '/') {
|
||||
dirname_start = &name[1];
|
||||
while(dirname_start > 0) {
|
||||
dirname_end = strchr(dirname_start, '/');
|
||||
//SERIAL_ECHO("start:");SERIAL_ECHOLN((int)(dirname_start - name));
|
||||
//SERIAL_ECHO("end :");SERIAL_ECHOLN((int)(dirname_end - name));
|
||||
if (dirname_end > 0 && dirname_end > dirname_start) {
|
||||
char subdirname[FILENAME_LENGTH];
|
||||
strncpy(subdirname, dirname_start, dirname_end-dirname_start);
|
||||
subdirname[dirname_end-dirname_start]=0;
|
||||
strncpy(subdirname, dirname_start, dirname_end - dirname_start);
|
||||
subdirname[dirname_end - dirname_start] = 0;
|
||||
SERIAL_ECHOLN(subdirname);
|
||||
if(!myDir.open(curDir,subdirname,O_READ))
|
||||
{
|
||||
if (!myDir.open(curDir, subdirname, O_READ)) {
|
||||
SERIAL_PROTOCOLPGM(MSG_SD_OPEN_FILE_FAIL);
|
||||
SERIAL_PROTOCOL(subdirname);
|
||||
SERIAL_PROTOCOLLNPGM(".");
|
||||
return;
|
||||
}
|
||||
else
|
||||
{
|
||||
else {
|
||||
//SERIAL_ECHOLN("dive ok");
|
||||
}
|
||||
|
||||
curDir=&myDir;
|
||||
dirname_start=dirname_end+1;
|
||||
|
||||
curDir = &myDir;
|
||||
dirname_start = dirname_end + 1;
|
||||
}
|
||||
else // the reminder after all /fsa/fdsa/ is the filename
|
||||
{
|
||||
fname=dirname_start;
|
||||
//SERIAL_ECHOLN("remaider");
|
||||
else { // the remainder after all /fsa/fdsa/ is the filename
|
||||
fname = dirname_start;
|
||||
//SERIAL_ECHOLN("remainder");
|
||||
//SERIAL_ECHOLN(fname);
|
||||
break;
|
||||
}
|
||||
|
||||
}
|
||||
}
|
||||
else //relative path
|
||||
{
|
||||
curDir=&workDir;
|
||||
else { //relative path
|
||||
curDir = &workDir;
|
||||
}
|
||||
if(read)
|
||||
{
|
||||
if (file.open(curDir, fname, O_READ))
|
||||
{
|
||||
|
||||
if (read) {
|
||||
if (file.open(curDir, fname, O_READ)) {
|
||||
filesize = file.fileSize();
|
||||
SERIAL_PROTOCOLPGM(MSG_SD_FILE_OPENED);
|
||||
SERIAL_PROTOCOL(fname);
|
||||
SERIAL_PROTOCOLPGM(MSG_SD_SIZE);
|
||||
SERIAL_PROTOCOLLN(filesize);
|
||||
sdpos = 0;
|
||||
|
||||
|
||||
SERIAL_PROTOCOLLNPGM(MSG_SD_FILE_SELECTED);
|
||||
getfilename(0, fname);
|
||||
lcd_setstatus(longFilename[0] ? longFilename : fname);
|
||||
}
|
||||
else
|
||||
{
|
||||
else {
|
||||
SERIAL_PROTOCOLPGM(MSG_SD_OPEN_FILE_FAIL);
|
||||
SERIAL_PROTOCOL(fname);
|
||||
SERIAL_PROTOCOLLNPGM(".");
|
||||
}
|
||||
}
|
||||
else
|
||||
{ //write
|
||||
if (!file.open(curDir, fname, O_CREAT | O_APPEND | O_WRITE | O_TRUNC))
|
||||
{
|
||||
else { //write
|
||||
if (!file.open(curDir, fname, O_CREAT | O_APPEND | O_WRITE | O_TRUNC)) {
|
||||
SERIAL_PROTOCOLPGM(MSG_SD_OPEN_FILE_FAIL);
|
||||
SERIAL_PROTOCOL(fname);
|
||||
SERIAL_PROTOCOLLNPGM(".");
|
||||
}
|
||||
else
|
||||
{
|
||||
else {
|
||||
saving = true;
|
||||
SERIAL_PROTOCOLPGM(MSG_SD_WRITE_TO_FILE);
|
||||
SERIAL_PROTOCOLLN(name);
|
||||
lcd_setstatus(fname);
|
||||
}
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
void CardReader::removeFile(char* name)
|
||||
{
|
||||
if(!cardOK)
|
||||
return;
|
||||
void CardReader::removeFile(char* name) {
|
||||
if (!cardOK) return;
|
||||
|
||||
file.close();
|
||||
sdprinting = false;
|
||||
|
||||
|
||||
|
||||
SdFile myDir;
|
||||
curDir=&root;
|
||||
char *fname=name;
|
||||
|
||||
char *dirname_start,*dirname_end;
|
||||
if(name[0]=='/')
|
||||
{
|
||||
dirname_start=strchr(name,'/')+1;
|
||||
while(dirname_start>0)
|
||||
{
|
||||
dirname_end=strchr(dirname_start,'/');
|
||||
//SERIAL_ECHO("start:");SERIAL_ECHOLN((int)(dirname_start-name));
|
||||
//SERIAL_ECHO("end :");SERIAL_ECHOLN((int)(dirname_end-name));
|
||||
if(dirname_end>0 && dirname_end>dirname_start)
|
||||
{
|
||||
curDir = &root;
|
||||
char *fname = name;
|
||||
|
||||
char *dirname_start, *dirname_end;
|
||||
if (name[0] == '/') {
|
||||
dirname_start = strchr(name, '/') + 1;
|
||||
while (dirname_start > 0) {
|
||||
dirname_end = strchr(dirname_start, '/');
|
||||
//SERIAL_ECHO("start:");SERIAL_ECHOLN((int)(dirname_start - name));
|
||||
//SERIAL_ECHO("end :");SERIAL_ECHOLN((int)(dirname_end - name));
|
||||
if (dirname_end > 0 && dirname_end > dirname_start) {
|
||||
char subdirname[FILENAME_LENGTH];
|
||||
strncpy(subdirname, dirname_start, dirname_end-dirname_start);
|
||||
subdirname[dirname_end-dirname_start]=0;
|
||||
strncpy(subdirname, dirname_start, dirname_end - dirname_start);
|
||||
subdirname[dirname_end - dirname_start] = 0;
|
||||
SERIAL_ECHOLN(subdirname);
|
||||
if(!myDir.open(curDir,subdirname,O_READ))
|
||||
{
|
||||
if (!myDir.open(curDir, subdirname, O_READ)) {
|
||||
SERIAL_PROTOCOLPGM("open failed, File: ");
|
||||
SERIAL_PROTOCOL(subdirname);
|
||||
SERIAL_PROTOCOLLNPGM(".");
|
||||
return;
|
||||
}
|
||||
else
|
||||
{
|
||||
else {
|
||||
//SERIAL_ECHOLN("dive ok");
|
||||
}
|
||||
|
||||
curDir=&myDir;
|
||||
dirname_start=dirname_end+1;
|
||||
|
||||
curDir = &myDir;
|
||||
dirname_start = dirname_end + 1;
|
||||
}
|
||||
else // the reminder after all /fsa/fdsa/ is the filename
|
||||
{
|
||||
fname=dirname_start;
|
||||
//SERIAL_ECHOLN("remaider");
|
||||
else { // the remainder after all /fsa/fdsa/ is the filename
|
||||
fname = dirname_start;
|
||||
//SERIAL_ECHOLN("remainder");
|
||||
//SERIAL_ECHOLN(fname);
|
||||
break;
|
||||
}
|
||||
|
||||
}
|
||||
}
|
||||
else //relative path
|
||||
{
|
||||
curDir=&workDir;
|
||||
else { // relative path
|
||||
curDir = &workDir;
|
||||
}
|
||||
|
||||
if (file.remove(curDir, fname)) {
|
||||
SERIAL_PROTOCOLPGM("File deleted:");
|
||||
SERIAL_PROTOCOLLN(fname);
|
||||
sdpos = 0;
|
||||
}
|
||||
else {
|
||||
SERIAL_PROTOCOLPGM("Deletion failed, File: ");
|
||||
SERIAL_PROTOCOL(fname);
|
||||
SERIAL_PROTOCOLLNPGM(".");
|
||||
}
|
||||
if (file.remove(curDir, fname))
|
||||
{
|
||||
SERIAL_PROTOCOLPGM("File deleted:");
|
||||
SERIAL_PROTOCOLLN(fname);
|
||||
sdpos = 0;
|
||||
}
|
||||
else
|
||||
{
|
||||
SERIAL_PROTOCOLPGM("Deletion failed, File: ");
|
||||
SERIAL_PROTOCOL(fname);
|
||||
SERIAL_PROTOCOLLNPGM(".");
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
void CardReader::getStatus()
|
||||
{
|
||||
if(cardOK){
|
||||
void CardReader::getStatus() {
|
||||
if (cardOK) {
|
||||
SERIAL_PROTOCOLPGM(MSG_SD_PRINTING_BYTE);
|
||||
SERIAL_PROTOCOL(sdpos);
|
||||
SERIAL_PROTOCOLPGM("/");
|
||||
SERIAL_PROTOCOLLN(filesize);
|
||||
}
|
||||
else{
|
||||
else {
|
||||
SERIAL_PROTOCOLLNPGM(MSG_SD_NOT_PRINTING);
|
||||
}
|
||||
}
|
||||
void CardReader::write_command(char *buf)
|
||||
{
|
||||
|
||||
void CardReader::write_command(char *buf) {
|
||||
char* begin = buf;
|
||||
char* npos = 0;
|
||||
char* end = buf + strlen(buf) - 1;
|
||||
|
||||
file.writeError = false;
|
||||
if((npos = strchr(buf, 'N')) != NULL)
|
||||
{
|
||||
if ((npos = strchr(buf, 'N')) != NULL) {
|
||||
begin = strchr(npos, ' ') + 1;
|
||||
end = strchr(npos, '*') - 1;
|
||||
}
|
||||
@ -484,162 +391,129 @@ void CardReader::write_command(char *buf)
|
||||
end[2] = '\n';
|
||||
end[3] = '\0';
|
||||
file.write(begin);
|
||||
if (file.writeError)
|
||||
{
|
||||
if (file.writeError) {
|
||||
SERIAL_ERROR_START;
|
||||
SERIAL_ERRORLNPGM(MSG_SD_ERR_WRITE_TO_FILE);
|
||||
}
|
||||
}
|
||||
|
||||
void CardReader::checkautostart(bool force) {
|
||||
if (!force && (!autostart_stilltocheck || autostart_atmillis < millis()))
|
||||
return;
|
||||
|
||||
void CardReader::checkautostart(bool force)
|
||||
{
|
||||
if(!force)
|
||||
{
|
||||
if(!autostart_stilltocheck)
|
||||
return;
|
||||
if(autostart_atmillis<millis())
|
||||
return;
|
||||
}
|
||||
autostart_stilltocheck=false;
|
||||
if(!cardOK)
|
||||
{
|
||||
autostart_stilltocheck = false;
|
||||
|
||||
if (!cardOK) {
|
||||
initsd();
|
||||
if(!cardOK) //fail
|
||||
return;
|
||||
if (!cardOK) return; // fail
|
||||
}
|
||||
|
||||
|
||||
char autoname[30];
|
||||
sprintf_P(autoname, PSTR("auto%i.g"), autostart_index);
|
||||
for(int8_t i=0;i<(int8_t)strlen(autoname);i++)
|
||||
autoname[i]=tolower(autoname[i]);
|
||||
for (int8_t i = 0; i < (int8_t)strlen(autoname); i++) autoname[i] = tolower(autoname[i]);
|
||||
|
||||
dir_t p;
|
||||
|
||||
root.rewind();
|
||||
|
||||
bool found=false;
|
||||
while (root.readDir(p, NULL) > 0)
|
||||
{
|
||||
for(int8_t i=0;i<(int8_t)strlen((char*)p.name);i++)
|
||||
p.name[i]=tolower(p.name[i]);
|
||||
//Serial.print((char*)p.name);
|
||||
//Serial.print(" ");
|
||||
//Serial.println(autoname);
|
||||
if(p.name[9]!='~') //skip safety copies
|
||||
if(strncmp((char*)p.name,autoname,5)==0)
|
||||
{
|
||||
char cmd[30];
|
||||
|
||||
bool found = false;
|
||||
while (root.readDir(p, NULL) > 0) {
|
||||
for (int8_t i = 0; i < (int8_t)strlen((char*)p.name); i++) p.name[i] = tolower(p.name[i]);
|
||||
if (p.name[9] != '~' && strncmp((char*)p.name, autoname, 5) == 0) {
|
||||
char cmd[30];
|
||||
sprintf_P(cmd, PSTR("M23 %s"), autoname);
|
||||
enquecommand(cmd);
|
||||
enquecommands_P(PSTR("M24"));
|
||||
found=true;
|
||||
found = true;
|
||||
}
|
||||
}
|
||||
if(!found)
|
||||
autostart_index=-1;
|
||||
if (!found)
|
||||
autostart_index = -1;
|
||||
else
|
||||
autostart_index++;
|
||||
}
|
||||
|
||||
void CardReader::closefile(bool store_location)
|
||||
{
|
||||
void CardReader::closefile(bool store_location) {
|
||||
file.sync();
|
||||
file.close();
|
||||
saving = false;
|
||||
logging = false;
|
||||
|
||||
if(store_location)
|
||||
{
|
||||
saving = logging = false;
|
||||
|
||||
if (store_location) {
|
||||
//future: store printer state, filename and position for continuing a stopped print
|
||||
// so one can unplug the printer and continue printing the next day.
|
||||
|
||||
}
|
||||
|
||||
|
||||
}
|
||||
|
||||
void CardReader::getfilename(uint16_t nr, const char * const match/*=NULL*/)
|
||||
{
|
||||
curDir=&workDir;
|
||||
lsAction=LS_GetFilename;
|
||||
nrFiles=nr;
|
||||
/**
|
||||
* Get the name of a file in the current directory by index
|
||||
*/
|
||||
void CardReader::getfilename(uint16_t nr, const char * const match/*=NULL*/) {
|
||||
curDir = &workDir;
|
||||
lsAction = LS_GetFilename;
|
||||
nrFiles = nr;
|
||||
curDir->rewind();
|
||||
lsDive("",*curDir,match);
|
||||
|
||||
lsDive("", *curDir, match);
|
||||
}
|
||||
|
||||
uint16_t CardReader::getnrfilenames()
|
||||
{
|
||||
curDir=&workDir;
|
||||
lsAction=LS_Count;
|
||||
nrFiles=0;
|
||||
uint16_t CardReader::getnrfilenames() {
|
||||
curDir = &workDir;
|
||||
lsAction = LS_Count;
|
||||
nrFiles = 0;
|
||||
curDir->rewind();
|
||||
lsDive("",*curDir);
|
||||
lsDive("", *curDir);
|
||||
//SERIAL_ECHOLN(nrFiles);
|
||||
return nrFiles;
|
||||
}
|
||||
|
||||
void CardReader::chdir(const char * relpath)
|
||||
{
|
||||
void CardReader::chdir(const char * relpath) {
|
||||
SdFile newfile;
|
||||
SdFile *parent=&root;
|
||||
|
||||
if(workDir.isOpen())
|
||||
parent=&workDir;
|
||||
|
||||
if(!newfile.open(*parent,relpath, O_READ))
|
||||
{
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPGM(MSG_SD_CANT_ENTER_SUBDIR);
|
||||
SERIAL_ECHOLN(relpath);
|
||||
SdFile *parent = &root;
|
||||
|
||||
if (workDir.isOpen()) parent = &workDir;
|
||||
|
||||
if (!newfile.open(*parent, relpath, O_READ)) {
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPGM(MSG_SD_CANT_ENTER_SUBDIR);
|
||||
SERIAL_ECHOLN(relpath);
|
||||
}
|
||||
else
|
||||
{
|
||||
else {
|
||||
if (workDirDepth < MAX_DIR_DEPTH) {
|
||||
for (int d = ++workDirDepth; d--;)
|
||||
workDirParents[d+1] = workDirParents[d];
|
||||
workDirParents[0]=*parent;
|
||||
++workDirDepth;
|
||||
for (int d = workDirDepth; d--;) workDirParents[d + 1] = workDirParents[d];
|
||||
workDirParents[0] = *parent;
|
||||
}
|
||||
workDir=newfile;
|
||||
workDir = newfile;
|
||||
}
|
||||
}
|
||||
|
||||
void CardReader::updir()
|
||||
{
|
||||
if(workDirDepth > 0)
|
||||
{
|
||||
void CardReader::updir() {
|
||||
if (workDirDepth > 0) {
|
||||
--workDirDepth;
|
||||
workDir = workDirParents[0];
|
||||
int d;
|
||||
for (int d = 0; d < workDirDepth; d++)
|
||||
workDirParents[d] = workDirParents[d+1];
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
void CardReader::printingHasFinished()
|
||||
{
|
||||
st_synchronize();
|
||||
if(file_subcall_ctr>0) //heading up to a parent file that called current as a procedure.
|
||||
{
|
||||
file.close();
|
||||
file_subcall_ctr--;
|
||||
openFile(filenames[file_subcall_ctr],true,true);
|
||||
setIndex(filespos[file_subcall_ctr]);
|
||||
startFileprint();
|
||||
}
|
||||
else
|
||||
{
|
||||
quickStop();
|
||||
file.close();
|
||||
sdprinting = false;
|
||||
if(SD_FINISHED_STEPPERRELEASE)
|
||||
{
|
||||
//finishAndDisableSteppers();
|
||||
enquecommands_P(PSTR(SD_FINISHED_RELEASECOMMAND));
|
||||
}
|
||||
autotempShutdown();
|
||||
void CardReader::printingHasFinished() {
|
||||
st_synchronize();
|
||||
if (file_subcall_ctr > 0) { // Heading up to a parent file that called current as a procedure.
|
||||
file.close();
|
||||
file_subcall_ctr--;
|
||||
openFile(filenames[file_subcall_ctr], true, true);
|
||||
setIndex(filespos[file_subcall_ctr]);
|
||||
startFileprint();
|
||||
}
|
||||
else {
|
||||
quickStop();
|
||||
file.close();
|
||||
sdprinting = false;
|
||||
if (SD_FINISHED_STEPPERRELEASE) {
|
||||
//finishAndDisableSteppers();
|
||||
enquecommands_P(PSTR(SD_FINISHED_RELEASECOMMAND));
|
||||
}
|
||||
autotempShutdown();
|
||||
}
|
||||
}
|
||||
|
||||
#endif //SDSUPPORT
|
||||
|
@ -3,21 +3,21 @@
|
||||
|
||||
#ifdef SDSUPPORT
|
||||
|
||||
#define MAX_DIR_DEPTH 10
|
||||
#define MAX_DIR_DEPTH 10 // Maximum folder depth
|
||||
|
||||
#include "SdFile.h"
|
||||
enum LsAction {LS_SerialPrint,LS_Count,LS_GetFilename};
|
||||
class CardReader
|
||||
{
|
||||
enum LsAction { LS_SerialPrint, LS_Count, LS_GetFilename };
|
||||
|
||||
class CardReader {
|
||||
public:
|
||||
CardReader();
|
||||
|
||||
|
||||
void initsd();
|
||||
void write_command(char *buf);
|
||||
//files auto[0-9].g on the sd card are performed in a row
|
||||
//this is to delay autostart and hence the initialisaiton of the sd card to some seconds after the normal init, so the device is available quick after a reset
|
||||
|
||||
void checkautostart(bool x);
|
||||
void checkautostart(bool x);
|
||||
void openFile(char* name,bool read,bool replace_current=true);
|
||||
void openLogFile(char* name);
|
||||
void removeFile(char* name);
|
||||
@ -30,9 +30,8 @@ public:
|
||||
|
||||
void getfilename(uint16_t nr, const char* const match=NULL);
|
||||
uint16_t getnrfilenames();
|
||||
|
||||
|
||||
void getAbsFilename(char *t);
|
||||
|
||||
|
||||
void ls();
|
||||
void chdir(const char * relpath);
|
||||
@ -41,56 +40,52 @@ public:
|
||||
|
||||
|
||||
FORCE_INLINE bool isFileOpen() { return file.isOpen(); }
|
||||
FORCE_INLINE bool eof() { return sdpos>=filesize ;};
|
||||
FORCE_INLINE int16_t get() { sdpos = file.curPosition();return (int16_t)file.read();};
|
||||
FORCE_INLINE void setIndex(long index) {sdpos = index;file.seekSet(index);};
|
||||
FORCE_INLINE uint8_t percentDone(){if(!isFileOpen()) return 0; if(filesize) return sdpos/((filesize+99)/100); else return 0;};
|
||||
FORCE_INLINE char* getWorkDirName(){workDir.getFilename(filename);return filename;};
|
||||
FORCE_INLINE bool eof() { return sdpos >= filesize; }
|
||||
FORCE_INLINE int16_t get() { sdpos = file.curPosition(); return (int16_t)file.read(); }
|
||||
FORCE_INLINE void setIndex(long index) { sdpos = index; file.seekSet(index); }
|
||||
FORCE_INLINE uint8_t percentDone() { return (isFileOpen() && filesize) ? sdpos / ((filesize + 99) / 100) : 0; }
|
||||
FORCE_INLINE char* getWorkDirName() { workDir.getFilename(filename); return filename; }
|
||||
|
||||
public:
|
||||
bool saving;
|
||||
bool logging;
|
||||
bool sdprinting;
|
||||
bool cardOK;
|
||||
char filename[FILENAME_LENGTH];
|
||||
char longFilename[LONG_FILENAME_LENGTH];
|
||||
bool filenameIsDir;
|
||||
bool saving, logging, sdprinting, cardOK, filenameIsDir;
|
||||
char filename[FILENAME_LENGTH], longFilename[LONG_FILENAME_LENGTH];
|
||||
int autostart_index;
|
||||
private:
|
||||
SdFile root,*curDir,workDir,workDirParents[MAX_DIR_DEPTH];
|
||||
SdFile root, *curDir, workDir, workDirParents[MAX_DIR_DEPTH];
|
||||
uint16_t workDirDepth;
|
||||
Sd2Card card;
|
||||
SdVolume volume;
|
||||
SdFile file;
|
||||
#define SD_PROCEDURE_DEPTH 1
|
||||
#define MAXPATHNAMELENGTH (FILENAME_LENGTH*MAX_DIR_DEPTH+MAX_DIR_DEPTH+1)
|
||||
#define MAXPATHNAMELENGTH (FILENAME_LENGTH*MAX_DIR_DEPTH + MAX_DIR_DEPTH + 1)
|
||||
uint8_t file_subcall_ctr;
|
||||
uint32_t filespos[SD_PROCEDURE_DEPTH];
|
||||
char filenames[SD_PROCEDURE_DEPTH][MAXPATHNAMELENGTH];
|
||||
uint32_t filesize;
|
||||
//int16_t n;
|
||||
unsigned long autostart_atmillis;
|
||||
uint32_t sdpos ;
|
||||
uint32_t sdpos;
|
||||
|
||||
bool autostart_stilltocheck; //the sd start is delayed, because otherwise the serial cannot answer fast enought to make contact with the hostsoftware.
|
||||
|
||||
|
||||
LsAction lsAction; //stored for recursion.
|
||||
int16_t nrFiles; //counter for the files in the current directory and recycled as position counter for getting the nrFiles'th name in the directory.
|
||||
uint16_t nrFiles; //counter for the files in the current directory and recycled as position counter for getting the nrFiles'th name in the directory.
|
||||
char* diveDirName;
|
||||
void lsDive(const char *prepend, SdFile parent, const char * const match=NULL);
|
||||
};
|
||||
|
||||
extern CardReader card;
|
||||
|
||||
#define IS_SD_PRINTING (card.sdprinting)
|
||||
|
||||
#if (SDCARDDETECT > -1)
|
||||
# ifdef SDCARDDETECTINVERTED
|
||||
# define IS_SD_INSERTED (READ(SDCARDDETECT)!=0)
|
||||
# else
|
||||
# define IS_SD_INSERTED (READ(SDCARDDETECT)==0)
|
||||
# endif //SDCARDTETECTINVERTED
|
||||
#ifdef SDCARDDETECTINVERTED
|
||||
#define IS_SD_INSERTED (READ(SDCARDDETECT) != 0)
|
||||
#else
|
||||
#define IS_SD_INSERTED (READ(SDCARDDETECT) == 0)
|
||||
#endif
|
||||
#else
|
||||
//If we don't have a card detect line, aways asume the card is inserted
|
||||
# define IS_SD_INSERTED true
|
||||
//No card detect line? Assume the card is inserted.
|
||||
#define IS_SD_INSERTED true
|
||||
#endif
|
||||
|
||||
#else
|
||||
@ -98,4 +93,5 @@ extern CardReader card;
|
||||
#define IS_SD_PRINTING (false)
|
||||
|
||||
#endif //SDSUPPORT
|
||||
#endif
|
||||
|
||||
#endif //__CARDREADER_H
|
||||
|
@ -1,59 +1,58 @@
|
||||
#include "Configuration.h"
|
||||
|
||||
#ifdef DIGIPOT_I2C
|
||||
|
||||
#include "Stream.h"
|
||||
#include "utility/twi.h"
|
||||
#include "Wire.h"
|
||||
|
||||
// Settings for the I2C based DIGIPOT (MCP4451) on Azteeg X3 Pro
|
||||
#if MB(5DPRINT)
|
||||
#define DIGIPOT_I2C_FACTOR 117.96
|
||||
#define DIGIPOT_I2C_MAX_CURRENT 1.736
|
||||
#define DIGIPOT_I2C_FACTOR 117.96
|
||||
#define DIGIPOT_I2C_MAX_CURRENT 1.736
|
||||
#else
|
||||
#define DIGIPOT_I2C_FACTOR 106.7
|
||||
#define DIGIPOT_I2C_MAX_CURRENT 2.5
|
||||
#define DIGIPOT_I2C_FACTOR 106.7
|
||||
#define DIGIPOT_I2C_MAX_CURRENT 2.5
|
||||
#endif
|
||||
|
||||
static byte current_to_wiper( float current ){
|
||||
return byte(ceil(float((DIGIPOT_I2C_FACTOR*current))));
|
||||
static byte current_to_wiper(float current) {
|
||||
return byte(ceil(float((DIGIPOT_I2C_FACTOR*current))));
|
||||
}
|
||||
|
||||
static void i2c_send(byte addr, byte a, byte b)
|
||||
{
|
||||
Wire.beginTransmission(addr);
|
||||
Wire.write(a);
|
||||
Wire.write(b);
|
||||
Wire.endTransmission();
|
||||
static void i2c_send(byte addr, byte a, byte b) {
|
||||
Wire.beginTransmission(addr);
|
||||
Wire.write(a);
|
||||
Wire.write(b);
|
||||
Wire.endTransmission();
|
||||
}
|
||||
|
||||
// This is for the MCP4451 I2C based digipot
|
||||
void digipot_i2c_set_current( int channel, float current )
|
||||
{
|
||||
current = min( (float) max( current, 0.0f ), DIGIPOT_I2C_MAX_CURRENT);
|
||||
// these addresses are specific to Azteeg X3 Pro, can be set to others,
|
||||
// In this case first digipot is at address A0=0, A1= 0, second one is at A0=0, A1= 1
|
||||
byte addr= 0x2C; // channel 0-3
|
||||
if(channel >= 4) {
|
||||
addr= 0x2E; // channel 4-7
|
||||
channel-= 4;
|
||||
}
|
||||
void digipot_i2c_set_current(int channel, float current) {
|
||||
current = min( (float) max( current, 0.0f ), DIGIPOT_I2C_MAX_CURRENT);
|
||||
// these addresses are specific to Azteeg X3 Pro, can be set to others,
|
||||
// In this case first digipot is at address A0=0, A1= 0, second one is at A0=0, A1= 1
|
||||
byte addr = 0x2C; // channel 0-3
|
||||
if (channel >= 4) {
|
||||
addr = 0x2E; // channel 4-7
|
||||
channel -= 4;
|
||||
}
|
||||
|
||||
// Initial setup
|
||||
i2c_send( addr, 0x40, 0xff );
|
||||
i2c_send( addr, 0xA0, 0xff );
|
||||
// Initial setup
|
||||
i2c_send(addr, 0x40, 0xff);
|
||||
i2c_send(addr, 0xA0, 0xff);
|
||||
|
||||
// Set actual wiper value
|
||||
byte addresses[4] = { 0x00, 0x10, 0x60, 0x70 };
|
||||
i2c_send( addr, addresses[channel], current_to_wiper(current) );
|
||||
// Set actual wiper value
|
||||
byte addresses[4] = { 0x00, 0x10, 0x60, 0x70 };
|
||||
i2c_send(addr, addresses[channel], current_to_wiper(current));
|
||||
}
|
||||
|
||||
void digipot_i2c_init()
|
||||
{
|
||||
const float digipot_motor_current[] = DIGIPOT_I2C_MOTOR_CURRENTS;
|
||||
Wire.begin();
|
||||
// setup initial currents as defined in Configuration_adv.h
|
||||
for(int i=0;i<=sizeof(digipot_motor_current)/sizeof(float);i++) {
|
||||
digipot_i2c_set_current(i, digipot_motor_current[i]);
|
||||
}
|
||||
void digipot_i2c_init() {
|
||||
const float digipot_motor_current[] = DIGIPOT_I2C_MOTOR_CURRENTS;
|
||||
Wire.begin();
|
||||
// setup initial currents as defined in Configuration_adv.h
|
||||
for(int i = 0; i <= sizeof(digipot_motor_current) / sizeof(float); i++) {
|
||||
digipot_i2c_set_current(i, digipot_motor_current[i]);
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif //DIGIPOT_I2C
|
||||
|
@ -587,6 +587,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
|
||||
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click
|
||||
|
||||
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
|
||||
// http://reprap.org/wiki/PanelOne
|
||||
//#define PANEL_ONE
|
||||
|
||||
// The MaKr3d Makr-Panel with graphic controller and SD support
|
||||
// http://reprap.org/wiki/MaKr3d_MaKrPanel
|
||||
//#define MAKRPANEL
|
||||
@ -645,6 +649,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||
#define ENCODER_STEPS_PER_MENU_ITEM 1
|
||||
#endif
|
||||
|
||||
#if defined (PANEL_ONE)
|
||||
#define SDSUPPORT
|
||||
#define ULTIMAKERCONTROLLER
|
||||
#endif
|
||||
|
||||
#if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
|
||||
#define DOGLCD
|
||||
|
@ -597,6 +597,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
|
||||
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click
|
||||
|
||||
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
|
||||
// http://reprap.org/wiki/PanelOne
|
||||
//#define PANEL_ONE
|
||||
|
||||
// The MaKr3d Makr-Panel with graphic controller and SD support
|
||||
// http://reprap.org/wiki/MaKr3d_MaKrPanel
|
||||
//#define MAKRPANEL
|
||||
@ -655,6 +659,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||
#define ENCODER_STEPS_PER_MENU_ITEM 1
|
||||
#endif
|
||||
|
||||
#if defined (PANEL_ONE)
|
||||
#define SDSUPPORT
|
||||
#define ULTIMAKERCONTROLLER
|
||||
#endif
|
||||
|
||||
#if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
|
||||
#define DOGLCD
|
||||
|
@ -590,6 +590,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
|
||||
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click
|
||||
|
||||
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
|
||||
// http://reprap.org/wiki/PanelOne
|
||||
//#define PANEL_ONE
|
||||
|
||||
// The MaKr3d Makr-Panel with graphic controller and SD support
|
||||
// http://reprap.org/wiki/MaKr3d_MaKrPanel
|
||||
//#define MAKRPANEL
|
||||
@ -648,6 +652,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||
#define ENCODER_STEPS_PER_MENU_ITEM 1
|
||||
#endif
|
||||
|
||||
#if defined (PANEL_ONE)
|
||||
#define SDSUPPORT
|
||||
#define ULTIMAKERCONTROLLER
|
||||
#endif
|
||||
|
||||
#if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
|
||||
#define DOGLCD
|
||||
|
@ -591,6 +591,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
|
||||
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click
|
||||
|
||||
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
|
||||
// http://reprap.org/wiki/PanelOne
|
||||
//#define PANEL_ONE
|
||||
|
||||
// The MaKr3d Makr-Panel with graphic controller and SD support
|
||||
// http://reprap.org/wiki/MaKr3d_MaKrPanel
|
||||
//#define MAKRPANEL
|
||||
@ -649,6 +653,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||
#define ENCODER_STEPS_PER_MENU_ITEM 1
|
||||
#endif
|
||||
|
||||
#if defined (PANEL_ONE)
|
||||
#define SDSUPPORT
|
||||
#define ULTIMAKERCONTROLLER
|
||||
#endif
|
||||
|
||||
#if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
|
||||
#define DOGLCD
|
||||
|
@ -495,6 +495,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
|
||||
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click
|
||||
|
||||
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
|
||||
// http://reprap.org/wiki/PanelOne
|
||||
//#define PANEL_ONE
|
||||
|
||||
// The MaKr3d Makr-Panel with graphic controller and SD support
|
||||
// http://reprap.org/wiki/MaKr3d_MaKrPanel
|
||||
//#define MAKRPANEL
|
||||
@ -560,6 +564,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||
#define ENCODER_STEPS_PER_MENU_ITEM 1
|
||||
#endif
|
||||
|
||||
#if defined (PANEL_ONE)
|
||||
#define SDSUPPORT
|
||||
#define ULTIMAKERCONTROLLER
|
||||
#endif
|
||||
|
||||
#if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
|
||||
#define DOGLCD
|
||||
|
@ -565,6 +565,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
|
||||
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click
|
||||
|
||||
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
|
||||
// http://reprap.org/wiki/PanelOne
|
||||
//#define PANEL_ONE
|
||||
|
||||
// The MaKr3d Makr-Panel with graphic controller and SD support
|
||||
// http://reprap.org/wiki/MaKr3d_MaKrPanel
|
||||
//#define MAKRPANEL
|
||||
@ -623,6 +627,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||
#define ENCODER_STEPS_PER_MENU_ITEM 1
|
||||
#endif
|
||||
|
||||
#if defined (PANEL_ONE)
|
||||
#define SDSUPPORT
|
||||
#define ULTIMAKERCONTROLLER
|
||||
#endif
|
||||
|
||||
#if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
|
||||
#define DOGLCD
|
||||
|
@ -578,6 +578,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
|
||||
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click
|
||||
|
||||
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
|
||||
// http://reprap.org/wiki/PanelOne
|
||||
//#define PANEL_ONE
|
||||
|
||||
// The MaKr3d Makr-Panel with graphic controller and SD support
|
||||
// http://reprap.org/wiki/MaKr3d_MaKrPanel
|
||||
//#define MAKRPANEL
|
||||
@ -636,6 +640,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||
#define ENCODER_STEPS_PER_MENU_ITEM 1
|
||||
#endif
|
||||
|
||||
#if defined (PANEL_ONE)
|
||||
#define SDSUPPORT
|
||||
#define ULTIMAKERCONTROLLER
|
||||
#endif
|
||||
|
||||
#if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
|
||||
#define DOGLCD
|
||||
|
@ -159,6 +159,43 @@
|
||||
|
||||
#define MSG_ERR_EEPROM_WRITE "Error writing to EEPROM!"
|
||||
|
||||
// temperature.cpp strings
|
||||
#define MSG_PID_AUTOTUNE "PID Autotune"
|
||||
#define MSG_PID_AUTOTUNE_START MSG_PID_AUTOTUNE " start"
|
||||
#define MSG_PID_AUTOTUNE_FAILED MSG_PID_AUTOTUNE " failed!"
|
||||
#define MSG_PID_BAD_EXTRUDER_NUM MSG_PID_AUTOTUNE_FAILED " Bad extruder number"
|
||||
#define MSG_PID_TEMP_TOO_HIGH MSG_PID_AUTOTUNE_FAILED " Temperature too high"
|
||||
#define MSG_PID_TIMEOUT MSG_PID_AUTOTUNE_FAILED " timeout"
|
||||
#define MSG_BIAS " bias: "
|
||||
#define MSG_D " d: "
|
||||
#define MSG_MIN " min: "
|
||||
#define MSG_MAX " max: "
|
||||
#define MSG_KU " Ku: "
|
||||
#define MSG_TU " Tu: "
|
||||
#define MSG_CLASSIC_PID " Classic PID "
|
||||
#define MSG_KP " Kp: "
|
||||
#define MSG_KI " Ki: "
|
||||
#define MSG_KD " Kd: "
|
||||
#define MSG_OK_B "ok B:"
|
||||
#define MSG_OK_T "ok T:"
|
||||
#define MSG_AT " @:"
|
||||
#define MSG_PID_AUTOTUNE_FINISHED MSG_PID_AUTOTUNE " finished! Put the last Kp, Ki and Kd constants from above into Configuration.h"
|
||||
#define MSG_PID_DEBUG " PID_DEBUG "
|
||||
#define MSG_PID_DEBUG_INPUT ": Input "
|
||||
#define MSG_PID_DEBUG_OUTPUT " Output "
|
||||
#define MSG_PID_DEBUG_PTERM " pTerm "
|
||||
#define MSG_PID_DEBUG_ITERM " iTerm "
|
||||
#define MSG_PID_DEBUG_DTERM " dTerm "
|
||||
#define MSG_HEATING_FAILED "Heating failed"
|
||||
#define MSG_EXTRUDER_SWITCHED_OFF "Extruder switched off. Temperature difference between temp sensors is too high !"
|
||||
|
||||
#define MSG_INVALID_EXTRUDER_NUM " - Invalid extruder number !"
|
||||
#define MSG_THERMAL_RUNAWAY_STOP "Thermal Runaway, system stopped! Heater_ID: "
|
||||
#define MSG_SWITCHED_OFF_MAX " switched off. MAXTEMP triggered !!"
|
||||
#define MSG_MINTEMP_EXTRUDER_OFF ": Extruder switched off. MINTEMP triggered !"
|
||||
#define MSG_MAXTEMP_EXTRUDER_OFF ": Extruder" MSG_SWITCHED_OFF_MAX
|
||||
#define MSG_MAXTEMP_BED_OFF "Heated bed" MSG_SWITCHED_OFF_MAX
|
||||
|
||||
// LCD Menu Messages
|
||||
|
||||
// Add your own character. Reference: https://github.com/MarlinFirmware/Marlin/pull/1434 photos
|
||||
|
@ -65,6 +65,18 @@
|
||||
#ifndef MSG_PREHEAT_ABS_SETTINGS
|
||||
#define MSG_PREHEAT_ABS_SETTINGS MSG_PREHEAT_ABS " conf"
|
||||
#endif
|
||||
#ifndef MSG_H1
|
||||
#define MSG_H1 "1"
|
||||
#endif
|
||||
#ifndef MSG_H2
|
||||
#define MSG_H2 "2"
|
||||
#endif
|
||||
#ifndef MSG_H3
|
||||
#define MSG_H3 "3"
|
||||
#endif
|
||||
#ifndef MSG_H4
|
||||
#define MSG_H4 "4"
|
||||
#endif
|
||||
#ifndef MSG_COOLDOWN
|
||||
#define MSG_COOLDOWN "Cooldown"
|
||||
#endif
|
||||
@ -110,6 +122,15 @@
|
||||
#ifndef MSG_NOZZLE
|
||||
#define MSG_NOZZLE "Nozzle"
|
||||
#endif
|
||||
#ifndef MSG_N2
|
||||
#define MSG_N2 " 2"
|
||||
#endif
|
||||
#ifndef MSG_N3
|
||||
#define MSG_N3 " 3"
|
||||
#endif
|
||||
#ifndef MSG_N4
|
||||
#define MSG_N4 " 4"
|
||||
#endif
|
||||
#ifndef MSG_BED
|
||||
#define MSG_BED "Bed"
|
||||
#endif
|
||||
@ -119,6 +140,18 @@
|
||||
#ifndef MSG_FLOW
|
||||
#define MSG_FLOW "Flow"
|
||||
#endif
|
||||
#ifndef MSG_F0
|
||||
#define MSG_F0 " 0"
|
||||
#endif
|
||||
#ifndef MSG_F1
|
||||
#define MSG_F1 " 1"
|
||||
#endif
|
||||
#ifndef MSG_F2
|
||||
#define MSG_F2 " 2"
|
||||
#endif
|
||||
#ifndef MSG_F3
|
||||
#define MSG_F3 " 3"
|
||||
#endif
|
||||
#ifndef MSG_CONTROL
|
||||
#define MSG_CONTROL "Control"
|
||||
#endif
|
||||
@ -152,6 +185,15 @@
|
||||
#ifndef MSG_PID_C
|
||||
#define MSG_PID_C "PID-C"
|
||||
#endif
|
||||
#ifndef MSG_E2
|
||||
#define MSG_E2 " E2"
|
||||
#endif
|
||||
#ifndef MSG_E3
|
||||
#define MSG_E3 " E3"
|
||||
#endif
|
||||
#ifndef MSG_E4
|
||||
#define MSG_E4 " E4"
|
||||
#endif
|
||||
#ifndef MSG_ACC
|
||||
#define MSG_ACC "Accel"
|
||||
#endif
|
||||
@ -213,7 +255,7 @@
|
||||
#define MSG_VOLUMETRIC "Filament"
|
||||
#endif
|
||||
#ifndef MSG_VOLUMETRIC_ENABLED
|
||||
#define MSG_VOLUMETRIC_ENABLED "E in mm" STR_h3
|
||||
#define MSG_VOLUMETRIC_ENABLED "E in mm" STR_h3
|
||||
#endif
|
||||
#ifndef MSG_FILAMENT_SIZE_EXTRUDER_0
|
||||
#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1"
|
||||
@ -341,23 +383,41 @@
|
||||
#ifndef MSG_ENDSTOP_ABORT
|
||||
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
||||
#endif
|
||||
#ifndef MSG_HEATING_FAILED_LCD
|
||||
#define MSG_HEATING_FAILED_LCD "Heating failed"
|
||||
#endif
|
||||
#ifndef MSG_ERR_REDUNDANT_TEMP
|
||||
#define MSG_ERR_REDUNDANT_TEMP "Err: REDUNDANT TEMP ERROR"
|
||||
#endif
|
||||
#ifndef MSG_THERMAL_RUNAWAY
|
||||
#define MSG_THERMAL_RUNAWAY "THERMAL RUNAWAY"
|
||||
#endif
|
||||
#ifndef MSG_ERR_MAXTEMP
|
||||
#define MSG_ERR_MAXTEMP "Err: MAXTEMP"
|
||||
#endif
|
||||
#ifndef MSG_ERR_MINTEMP
|
||||
#define MSG_ERR_MINTEMP "Err: MINTEMP"
|
||||
#endif
|
||||
#ifndef MSG_ERR_MAXTEMP_BED
|
||||
#define MSG_ERR_MAXTEMP_BED "Err: MAXTEMP BED"
|
||||
#endif
|
||||
|
||||
#ifdef DELTA_CALIBRATION_MENU
|
||||
#ifndef MSG_DELTA_CALIBRATE
|
||||
#define MSG_DELTA_CALIBRATE "Delta Calibration"
|
||||
#endif
|
||||
#ifndef MSG_DELTA_CALIBRATE_X
|
||||
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
|
||||
#endif
|
||||
#ifndef MSG_DELTA_CALIBRATE_Y
|
||||
#define MSG_DELTA_CALIBRATE_Y "Calibrate Y"
|
||||
#endif
|
||||
#ifndef MSG_DELTA_CALIBRATE_Z
|
||||
#define MSG_DELTA_CALIBRATE_Z "Calibrate Z"
|
||||
#endif
|
||||
#ifndef MSG_DELTA_CALIBRATE_CENTER
|
||||
#define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center"
|
||||
#endif
|
||||
#ifndef MSG_DELTA_CALIBRATE
|
||||
#define MSG_DELTA_CALIBRATE "Delta Calibration"
|
||||
#endif
|
||||
#ifndef MSG_DELTA_CALIBRATE_X
|
||||
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
|
||||
#endif
|
||||
#ifndef MSG_DELTA_CALIBRATE_Y
|
||||
#define MSG_DELTA_CALIBRATE_Y "Calibrate Y"
|
||||
#endif
|
||||
#ifndef MSG_DELTA_CALIBRATE_Z
|
||||
#define MSG_DELTA_CALIBRATE_Z "Calibrate Z"
|
||||
#endif
|
||||
#ifndef MSG_DELTA_CALIBRATE_CENTER
|
||||
#define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center"
|
||||
#endif
|
||||
#endif // DELTA_CALIBRATION_MENU
|
||||
|
||||
#endif // LANGUAGE_EN_H
|
||||
|
@ -122,12 +122,22 @@
|
||||
#ifdef ULTRA_LCD
|
||||
|
||||
#ifdef NEWPANEL
|
||||
#define LCD_PINS_RS 16
|
||||
#define LCD_PINS_ENABLE 17
|
||||
#define LCD_PINS_D4 23
|
||||
#define LCD_PINS_D5 25
|
||||
#define LCD_PINS_D6 27
|
||||
#define LCD_PINS_D7 29
|
||||
#ifdef PANEL_ONE
|
||||
#define LCD_PINS_RS 40
|
||||
#define LCD_PINS_ENABLE 42
|
||||
#define LCD_PINS_D4 65
|
||||
#define LCD_PINS_D5 66
|
||||
#define LCD_PINS_D6 44
|
||||
#define LCD_PINS_D7 64
|
||||
#else
|
||||
#define LCD_PINS_RS 16
|
||||
#define LCD_PINS_ENABLE 17
|
||||
#define LCD_PINS_D4 23
|
||||
#define LCD_PINS_D5 25
|
||||
#define LCD_PINS_D6 27
|
||||
#define LCD_PINS_D7 29
|
||||
#endif
|
||||
|
||||
|
||||
#ifdef REPRAP_DISCOUNT_SMART_CONTROLLER
|
||||
#define BEEPER 37
|
||||
@ -162,6 +172,10 @@
|
||||
#define SHIFT_OUT 40 // shift register
|
||||
#define SHIFT_CLK 44 // shift register
|
||||
#define SHIFT_LD 42 // shift register
|
||||
#elif defined(PANEL_ONE)
|
||||
#define BTN_EN1 59 // AUX2 PIN 3
|
||||
#define BTN_EN2 63 // AUX2 PIN 4
|
||||
#define BTN_ENC 49 // AUX3 PIN 7
|
||||
#else
|
||||
#define BTN_EN1 37
|
||||
#define BTN_EN2 35
|
||||
|
@ -6,6 +6,10 @@
|
||||
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
|
||||
#endif
|
||||
|
||||
#if EXTRUDERS > 3
|
||||
#error RUMBA supports up to 3 extruders. Comment this line to keep going.
|
||||
#endif
|
||||
|
||||
#define X_STEP_PIN 17
|
||||
#define X_DIR_PIN 16
|
||||
#define X_ENABLE_PIN 48
|
||||
|
@ -399,89 +399,84 @@ ISR(TIMER1_COMPA_vect)
|
||||
count_direction[Y_AXIS]=1;
|
||||
}
|
||||
|
||||
// Set direction en check limit switches
|
||||
#ifndef COREXY
|
||||
if ((out_bits & (1<<X_AXIS)) != 0) // stepping along -X axis
|
||||
#else
|
||||
if ((out_bits & (1<<X_HEAD)) != 0) //AlexBorro: Head direction in -X axis for CoreXY bots.
|
||||
#endif
|
||||
if(check_endstops) // check X and Y Endstops
|
||||
{
|
||||
CHECK_ENDSTOPS
|
||||
{
|
||||
#ifdef DUAL_X_CARRIAGE
|
||||
// with 2 x-carriages, endstops are only checked in the homing direction for the active extruder
|
||||
if ((current_block->active_extruder == 0 && X_HOME_DIR == -1)
|
||||
|| (current_block->active_extruder != 0 && X2_HOME_DIR == -1))
|
||||
#endif
|
||||
{
|
||||
#if defined(X_MIN_PIN) && X_MIN_PIN > -1
|
||||
bool x_min_endstop=(READ(X_MIN_PIN) != X_MIN_ENDSTOP_INVERTING);
|
||||
if(x_min_endstop && old_x_min_endstop && (current_block->steps_x > 0)) {
|
||||
endstops_trigsteps[X_AXIS] = count_position[X_AXIS];
|
||||
endstop_x_hit=true;
|
||||
step_events_completed = current_block->step_event_count;
|
||||
#ifndef COREXY
|
||||
if ((out_bits & (1<<X_AXIS)) != 0) // stepping along -X axis (regular cartesians bot)
|
||||
#else
|
||||
if (!((current_block->steps_x == current_block->steps_y) && ((out_bits & (1<<X_AXIS))>>X_AXIS != (out_bits & (1<<Y_AXIS))>>Y_AXIS))) // AlexBorro: If DeltaX == -DeltaY, the movement is only in Y axis
|
||||
if ((out_bits & (1<<X_HEAD)) != 0) //AlexBorro: Head direction in -X axis for CoreXY bots.
|
||||
#endif
|
||||
{ // -direction
|
||||
#ifdef DUAL_X_CARRIAGE
|
||||
// with 2 x-carriages, endstops are only checked in the homing direction for the active extruder
|
||||
if ((current_block->active_extruder == 0 && X_HOME_DIR == -1) || (current_block->active_extruder != 0 && X2_HOME_DIR == -1))
|
||||
#endif
|
||||
{
|
||||
#if defined(X_MIN_PIN) && X_MIN_PIN > -1
|
||||
bool x_min_endstop=(READ(X_MIN_PIN) != X_MIN_ENDSTOP_INVERTING);
|
||||
if(x_min_endstop && old_x_min_endstop && (current_block->steps_x > 0))
|
||||
{
|
||||
endstops_trigsteps[X_AXIS] = count_position[X_AXIS];
|
||||
endstop_x_hit=true;
|
||||
step_events_completed = current_block->step_event_count;
|
||||
}
|
||||
old_x_min_endstop = x_min_endstop;
|
||||
#endif
|
||||
}
|
||||
old_x_min_endstop = x_min_endstop;
|
||||
#endif
|
||||
}
|
||||
}
|
||||
}
|
||||
else
|
||||
{ // +direction
|
||||
CHECK_ENDSTOPS
|
||||
{
|
||||
#ifdef DUAL_X_CARRIAGE
|
||||
// with 2 x-carriages, endstops are only checked in the homing direction for the active extruder
|
||||
if ((current_block->active_extruder == 0 && X_HOME_DIR == 1)
|
||||
|| (current_block->active_extruder != 0 && X2_HOME_DIR == 1))
|
||||
#endif
|
||||
{
|
||||
#if defined(X_MAX_PIN) && X_MAX_PIN > -1
|
||||
bool x_max_endstop=(READ(X_MAX_PIN) != X_MAX_ENDSTOP_INVERTING);
|
||||
if(x_max_endstop && old_x_max_endstop && (current_block->steps_x > 0)){
|
||||
endstops_trigsteps[X_AXIS] = count_position[X_AXIS];
|
||||
endstop_x_hit=true;
|
||||
step_events_completed = current_block->step_event_count;
|
||||
else
|
||||
{ // +direction
|
||||
#ifdef DUAL_X_CARRIAGE
|
||||
// with 2 x-carriages, endstops are only checked in the homing direction for the active extruder
|
||||
if ((current_block->active_extruder == 0 && X_HOME_DIR == 1) || (current_block->active_extruder != 0 && X2_HOME_DIR == 1))
|
||||
#endif
|
||||
{
|
||||
#if defined(X_MAX_PIN) && X_MAX_PIN > -1
|
||||
bool x_max_endstop=(READ(X_MAX_PIN) != X_MAX_ENDSTOP_INVERTING);
|
||||
if(x_max_endstop && old_x_max_endstop && (current_block->steps_x > 0))
|
||||
{
|
||||
endstops_trigsteps[X_AXIS] = count_position[X_AXIS];
|
||||
endstop_x_hit=true;
|
||||
step_events_completed = current_block->step_event_count;
|
||||
}
|
||||
old_x_max_endstop = x_max_endstop;
|
||||
#endif
|
||||
}
|
||||
old_x_max_endstop = x_max_endstop;
|
||||
#endif
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
#ifndef COREXY
|
||||
if ((out_bits & (1<<Y_AXIS)) != 0) // -direction
|
||||
#else
|
||||
if ((out_bits & (1<<Y_HEAD)) != 0) //AlexBorro: Head direction in -Y axis for CoreXY bots.
|
||||
#endif
|
||||
{
|
||||
CHECK_ENDSTOPS
|
||||
{
|
||||
#if defined(Y_MIN_PIN) && Y_MIN_PIN > -1
|
||||
bool y_min_endstop=(READ(Y_MIN_PIN) != Y_MIN_ENDSTOP_INVERTING);
|
||||
if(y_min_endstop && old_y_min_endstop && (current_block->steps_y > 0)) {
|
||||
endstops_trigsteps[Y_AXIS] = count_position[Y_AXIS];
|
||||
endstop_y_hit=true;
|
||||
step_events_completed = current_block->step_event_count;
|
||||
}
|
||||
old_y_min_endstop = y_min_endstop;
|
||||
#ifndef COREXY
|
||||
if ((out_bits & (1<<Y_AXIS)) != 0) // -direction
|
||||
#else
|
||||
if (!((current_block->steps_x == current_block->steps_y) && ((out_bits & (1<<X_AXIS))>>X_AXIS == (out_bits & (1<<Y_AXIS))>>Y_AXIS))) // AlexBorro: If DeltaX == DeltaY, the movement is only in X axis
|
||||
if ((out_bits & (1<<Y_HEAD)) != 0) //AlexBorro: Head direction in -Y axis for CoreXY bots.
|
||||
#endif
|
||||
}
|
||||
}
|
||||
else
|
||||
{ // +direction
|
||||
CHECK_ENDSTOPS
|
||||
{
|
||||
#if defined(Y_MAX_PIN) && Y_MAX_PIN > -1
|
||||
bool y_max_endstop=(READ(Y_MAX_PIN) != Y_MAX_ENDSTOP_INVERTING);
|
||||
if(y_max_endstop && old_y_max_endstop && (current_block->steps_y > 0)){
|
||||
endstops_trigsteps[Y_AXIS] = count_position[Y_AXIS];
|
||||
endstop_y_hit=true;
|
||||
step_events_completed = current_block->step_event_count;
|
||||
}
|
||||
old_y_max_endstop = y_max_endstop;
|
||||
#endif
|
||||
}
|
||||
{ // -direction
|
||||
#if defined(Y_MIN_PIN) && Y_MIN_PIN > -1
|
||||
bool y_min_endstop=(READ(Y_MIN_PIN) != Y_MIN_ENDSTOP_INVERTING);
|
||||
if(y_min_endstop && old_y_min_endstop && (current_block->steps_y > 0))
|
||||
{
|
||||
endstops_trigsteps[Y_AXIS] = count_position[Y_AXIS];
|
||||
endstop_y_hit=true;
|
||||
step_events_completed = current_block->step_event_count;
|
||||
}
|
||||
old_y_min_endstop = y_min_endstop;
|
||||
#endif
|
||||
}
|
||||
else
|
||||
{ // +direction
|
||||
#if defined(Y_MAX_PIN) && Y_MAX_PIN > -1
|
||||
bool y_max_endstop=(READ(Y_MAX_PIN) != Y_MAX_ENDSTOP_INVERTING);
|
||||
if(y_max_endstop && old_y_max_endstop && (current_block->steps_y > 0))
|
||||
{
|
||||
endstops_trigsteps[Y_AXIS] = count_position[Y_AXIS];
|
||||
endstop_y_hit=true;
|
||||
step_events_completed = current_block->step_event_count;
|
||||
}
|
||||
old_y_max_endstop = y_max_endstop;
|
||||
#endif
|
||||
|
||||
}
|
||||
}
|
||||
|
||||
if ((out_bits & (1<<Z_AXIS)) != 0) { // -direction
|
||||
|
File diff suppressed because it is too large
Load Diff
@ -85,55 +85,25 @@ extern float current_temperature_bed;
|
||||
//inline so that there is no performance decrease.
|
||||
//deg=degreeCelsius
|
||||
|
||||
FORCE_INLINE float degHotend(uint8_t extruder) {
|
||||
return current_temperature[extruder];
|
||||
};
|
||||
FORCE_INLINE float degHotend(uint8_t extruder) { return current_temperature[extruder]; }
|
||||
FORCE_INLINE float degBed() { return current_temperature_bed; }
|
||||
|
||||
#ifdef SHOW_TEMP_ADC_VALUES
|
||||
FORCE_INLINE float rawHotendTemp(uint8_t extruder) {
|
||||
return current_temperature_raw[extruder];
|
||||
};
|
||||
|
||||
FORCE_INLINE float rawBedTemp() {
|
||||
return current_temperature_bed_raw;
|
||||
};
|
||||
FORCE_INLINE float rawHotendTemp(uint8_t extruder) { return current_temperature_raw[extruder]; }
|
||||
FORCE_INLINE float rawBedTemp() { return current_temperature_bed_raw; }
|
||||
#endif
|
||||
|
||||
FORCE_INLINE float degBed() {
|
||||
return current_temperature_bed;
|
||||
};
|
||||
FORCE_INLINE float degTargetHotend(uint8_t extruder) { return target_temperature[extruder]; }
|
||||
FORCE_INLINE float degTargetBed() { return target_temperature_bed; }
|
||||
|
||||
FORCE_INLINE float degTargetHotend(uint8_t extruder) {
|
||||
return target_temperature[extruder];
|
||||
};
|
||||
FORCE_INLINE void setTargetHotend(const float &celsius, uint8_t extruder) { target_temperature[extruder] = celsius; }
|
||||
FORCE_INLINE void setTargetBed(const float &celsius) { target_temperature_bed = celsius; }
|
||||
|
||||
FORCE_INLINE float degTargetBed() {
|
||||
return target_temperature_bed;
|
||||
};
|
||||
FORCE_INLINE bool isHeatingHotend(uint8_t extruder) { return target_temperature[extruder] > current_temperature[extruder]; }
|
||||
FORCE_INLINE bool isHeatingBed() { return target_temperature_bed > current_temperature_bed; }
|
||||
|
||||
FORCE_INLINE void setTargetHotend(const float &celsius, uint8_t extruder) {
|
||||
target_temperature[extruder] = celsius;
|
||||
};
|
||||
|
||||
FORCE_INLINE void setTargetBed(const float &celsius) {
|
||||
target_temperature_bed = celsius;
|
||||
};
|
||||
|
||||
FORCE_INLINE bool isHeatingHotend(uint8_t extruder){
|
||||
return target_temperature[extruder] > current_temperature[extruder];
|
||||
};
|
||||
|
||||
FORCE_INLINE bool isHeatingBed() {
|
||||
return target_temperature_bed > current_temperature_bed;
|
||||
};
|
||||
|
||||
FORCE_INLINE bool isCoolingHotend(uint8_t extruder) {
|
||||
return target_temperature[extruder] < current_temperature[extruder];
|
||||
};
|
||||
|
||||
FORCE_INLINE bool isCoolingBed() {
|
||||
return target_temperature_bed < current_temperature_bed;
|
||||
};
|
||||
FORCE_INLINE bool isCoolingHotend(uint8_t extruder) { return target_temperature[extruder] < current_temperature[extruder]; }
|
||||
FORCE_INLINE bool isCoolingBed() { return target_temperature_bed < current_temperature_bed; }
|
||||
|
||||
#define degHotend0() degHotend(0)
|
||||
#define degTargetHotend0() degTargetHotend(0)
|
||||
@ -141,38 +111,36 @@ FORCE_INLINE bool isCoolingBed() {
|
||||
#define isHeatingHotend0() isHeatingHotend(0)
|
||||
#define isCoolingHotend0() isCoolingHotend(0)
|
||||
#if EXTRUDERS > 1
|
||||
#define degHotend1() degHotend(1)
|
||||
#define degTargetHotend1() degTargetHotend(1)
|
||||
#define setTargetHotend1(_celsius) setTargetHotend((_celsius), 1)
|
||||
#define isHeatingHotend1() isHeatingHotend(1)
|
||||
#define isCoolingHotend1() isCoolingHotend(1)
|
||||
#define degHotend1() degHotend(1)
|
||||
#define degTargetHotend1() degTargetHotend(1)
|
||||
#define setTargetHotend1(_celsius) setTargetHotend((_celsius), 1)
|
||||
#define isHeatingHotend1() isHeatingHotend(1)
|
||||
#define isCoolingHotend1() isCoolingHotend(1)
|
||||
#else
|
||||
#define setTargetHotend1(_celsius) do{}while(0)
|
||||
#define setTargetHotend1(_celsius) do{}while(0)
|
||||
#endif
|
||||
#if EXTRUDERS > 2
|
||||
#define degHotend2() degHotend(2)
|
||||
#define degTargetHotend2() degTargetHotend(2)
|
||||
#define setTargetHotend2(_celsius) setTargetHotend((_celsius), 2)
|
||||
#define isHeatingHotend2() isHeatingHotend(2)
|
||||
#define isCoolingHotend2() isCoolingHotend(2)
|
||||
#define degHotend2() degHotend(2)
|
||||
#define degTargetHotend2() degTargetHotend(2)
|
||||
#define setTargetHotend2(_celsius) setTargetHotend((_celsius), 2)
|
||||
#define isHeatingHotend2() isHeatingHotend(2)
|
||||
#define isCoolingHotend2() isCoolingHotend(2)
|
||||
#else
|
||||
#define setTargetHotend2(_celsius) do{}while(0)
|
||||
#define setTargetHotend2(_celsius) do{}while(0)
|
||||
#endif
|
||||
#if EXTRUDERS > 3
|
||||
#define degHotend3() degHotend(3)
|
||||
#define degTargetHotend3() degTargetHotend(3)
|
||||
#define setTargetHotend3(_celsius) setTargetHotend((_celsius), 3)
|
||||
#define isHeatingHotend3() isHeatingHotend(3)
|
||||
#define isCoolingHotend3() isCoolingHotend(3)
|
||||
#define degHotend3() degHotend(3)
|
||||
#define degTargetHotend3() degTargetHotend(3)
|
||||
#define setTargetHotend3(_celsius) setTargetHotend((_celsius), 3)
|
||||
#define isHeatingHotend3() isHeatingHotend(3)
|
||||
#define isCoolingHotend3() isCoolingHotend(3)
|
||||
#else
|
||||
#define setTargetHotend3(_celsius) do{}while(0)
|
||||
#define setTargetHotend3(_celsius) do{}while(0)
|
||||
#endif
|
||||
#if EXTRUDERS > 4
|
||||
#error Invalid number of extruders
|
||||
#error Invalid number of extruders
|
||||
#endif
|
||||
|
||||
|
||||
|
||||
int getHeaterPower(int heater);
|
||||
void disable_heater();
|
||||
void setWatch();
|
||||
@ -189,15 +157,14 @@ static bool thermal_runaway = false;
|
||||
#endif
|
||||
#endif
|
||||
|
||||
FORCE_INLINE void autotempShutdown(){
|
||||
#ifdef AUTOTEMP
|
||||
if(autotemp_enabled)
|
||||
{
|
||||
autotemp_enabled=false;
|
||||
if(degTargetHotend(active_extruder)>autotemp_min)
|
||||
setTargetHotend(0,active_extruder);
|
||||
}
|
||||
#endif
|
||||
FORCE_INLINE void autotempShutdown() {
|
||||
#ifdef AUTOTEMP
|
||||
if (autotemp_enabled) {
|
||||
autotemp_enabled = false;
|
||||
if (degTargetHotend(active_extruder) > autotemp_min)
|
||||
setTargetHotend(0, active_extruder);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
void PID_autotune(float temp, int extruder, int ncycles);
|
||||
|
@ -1096,13 +1096,26 @@ const short temptable_1047[][2] PROGMEM = {
|
||||
#endif
|
||||
|
||||
#if (THERMISTORHEATER_0 == 999) || (THERMISTORHEATER_1 == 999) || (THERMISTORHEATER_2 == 999) || (THERMISTORHEATER_3 == 999) || (THERMISTORBED == 999) //User defined table
|
||||
// Dummy Thermistor table.. It will ALWAYS read 25C.
|
||||
const short temptable_999[][2] PROGMEM = {
|
||||
{1*OVERSAMPLENR, 25},
|
||||
{1023*OVERSAMPLENR, 25}
|
||||
// Dummy Thermistor table.. It will ALWAYS read a fixed value.
|
||||
#ifndef DUMMY_THERMISTOR_999_VALUE
|
||||
#define DUMMY_THERMISTOR_999_VALUE 25
|
||||
#endif
|
||||
const short temptable_999[][2] PROGMEM = {
|
||||
{1*OVERSAMPLENR, DUMMY_THERMISTOR_999_VALUE},
|
||||
{1023*OVERSAMPLENR, DUMMY_THERMISTOR_999_VALUE}
|
||||
};
|
||||
#endif
|
||||
|
||||
#if (THERMISTORHEATER_0 == 998) || (THERMISTORHEATER_1 == 998) || (THERMISTORHEATER_2 == 998) || (THERMISTORHEATER_3 == 998) || (THERMISTORBED == 998) //User defined table
|
||||
// Dummy Thermistor table.. It will ALWAYS read a fixed value.
|
||||
#ifndef DUMMY_THERMISTOR_998_VALUE
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
#endif
|
||||
const short temptable_998[][2] PROGMEM = {
|
||||
{1*OVERSAMPLENR, DUMMY_THERMISTOR_998_VALUE},
|
||||
{1023*OVERSAMPLENR, DUMMY_THERMISTOR_998_VALUE}
|
||||
};
|
||||
#endif
|
||||
|
||||
|
||||
#define _TT_NAME(_N) temptable_ ## _N
|
||||
|
1582
Marlin/ultralcd.cpp
1582
Marlin/ultralcd.cpp
File diff suppressed because it is too large
Load Diff
Loading…
Reference in New Issue
Block a user