Merge pull request #846 from Dim3nsioneer/Marlin_v1
Extended Preheat options
This commit is contained in:
commit
51c6bd6b72
@ -77,8 +77,18 @@
|
||||
#define MSG_AUTO_HOME "Auto home"
|
||||
#define MSG_SET_ORIGIN "Set origin"
|
||||
#define MSG_PREHEAT_PLA "Preheat PLA"
|
||||
#define MSG_PREHEAT_PLA0 "Preheat PLA 1"
|
||||
#define MSG_PREHEAT_PLA1 "Preheat PLA 2"
|
||||
#define MSG_PREHEAT_PLA2 "Preheat PLA 3"
|
||||
#define MSG_PREHEAT_PLA012 "Preheat PLA All"
|
||||
#define MSG_PREHEAT_PLA_BEDONLY "Preheat PLA Bed"
|
||||
#define MSG_PREHEAT_PLA_SETTINGS "Preheat PLA conf"
|
||||
#define MSG_PREHEAT_ABS "Preheat ABS"
|
||||
#define MSG_PREHEAT_ABS0 "Preheat ABS 1"
|
||||
#define MSG_PREHEAT_ABS1 "Preheat ABS 2"
|
||||
#define MSG_PREHEAT_ABS2 "Preheat ABS 3"
|
||||
#define MSG_PREHEAT_ABS012 "Preheat ABS All"
|
||||
#define MSG_PREHEAT_ABS_BEDONLY "Preheat ABS Bed"
|
||||
#define MSG_PREHEAT_ABS_SETTINGS "Preheat ABS conf"
|
||||
#define MSG_COOLDOWN "Cooldown"
|
||||
#define MSG_SWITCH_PS_ON "Switch power on"
|
||||
@ -251,7 +261,6 @@
|
||||
|
||||
#if LANGUAGE_CHOICE == 2
|
||||
|
||||
|
||||
// LCD Menu Messages
|
||||
// Please note these are limited to 17 characters!
|
||||
|
||||
@ -264,8 +273,18 @@
|
||||
#define MSG_AUTO_HOME "Auto. poz. zerowa"
|
||||
#define MSG_SET_ORIGIN "Ustaw punkt zero"
|
||||
#define MSG_PREHEAT_PLA "Rozgrzej PLA"
|
||||
#define MSG_PREHEAT_PLA0 "Rozgrzej PLA 1"
|
||||
#define MSG_PREHEAT_PLA1 "Rozgrzej PLA 2"
|
||||
#define MSG_PREHEAT_PLA2 "Rozgrzej PLA 3"
|
||||
#define MSG_PREHEAT_PLA012 "Roz. PLA Wszystko"
|
||||
#define MSG_PREHEAT_PLA_BEDONLY "Rozgrzej PLA Loze"
|
||||
#define MSG_PREHEAT_PLA_SETTINGS "Ustaw. rozg. PLA"
|
||||
#define MSG_PREHEAT_ABS "Rozgrzej ABS"
|
||||
#define MSG_PREHEAT_ABS0 "Rozgrzej ABS 1"
|
||||
#define MSG_PREHEAT_ABS1 "Rozgrzej ABS 2"
|
||||
#define MSG_PREHEAT_ABS2 "Rozgrzej ABS 3"
|
||||
#define MSG_PREHEAT_ABS012 "Roz. ABS Wszystko"
|
||||
#define MSG_PREHEAT_ABS_BEDONLY "Rozgrzej ABS Loze"
|
||||
#define MSG_PREHEAT_ABS_SETTINGS "Ustaw. rozg. ABS"
|
||||
#define MSG_COOLDOWN "Chlodzenie"
|
||||
#define MSG_SWITCH_PS_ON "Wlacz zasilacz"
|
||||
@ -453,8 +472,18 @@
|
||||
#define MSG_AUTO_HOME "Home auto."
|
||||
#define MSG_SET_ORIGIN "Regler origine"
|
||||
#define MSG_PREHEAT_PLA " Prechauffage PLA"
|
||||
#define MSG_PREHEAT_PLA_SETTINGS " Regl. prech. PLA"
|
||||
#define MSG_PREHEAT_PLA0 "Prechauff. PLA 1"
|
||||
#define MSG_PREHEAT_PLA1 "Prechauff. PLA 2"
|
||||
#define MSG_PREHEAT_PLA2 "Prechauff. PLA 3"
|
||||
#define MSG_PREHEAT_PLA012 "Prech. PLA Tout"
|
||||
#define MSG_PREHEAT_PLA_BEDONLY "Prech. PLA Plateau"
|
||||
#define MSG_PREHEAT_PLA_SETTINGS "Regl. prech. PLA"
|
||||
#define MSG_PREHEAT_ABS "Prechauffage ABS"
|
||||
#define MSG_PREHEAT_ABS0 "Prechauff. ABS 1"
|
||||
#define MSG_PREHEAT_ABS1 "Prechauff. ABS 2"
|
||||
#define MSG_PREHEAT_ABS2 "Prechauff. ABS 3"
|
||||
#define MSG_PREHEAT_ABS012 "Prech. ABS Tout"
|
||||
#define MSG_PREHEAT_ABS_BEDONLY "Prech. ABS Plateau"
|
||||
#define MSG_PREHEAT_ABS_SETTINGS "Regl. prech. ABS"
|
||||
#define MSG_COOLDOWN "Refroidir"
|
||||
#define MSG_SWITCH_PS_ON "Allumer alim."
|
||||
@ -643,8 +672,18 @@
|
||||
#define MSG_AUTO_HOME "Auto Nullpunkt"
|
||||
#define MSG_SET_ORIGIN "Setze Nullpunkt"
|
||||
#define MSG_PREHEAT_PLA "Vorwärmen PLA"
|
||||
#define MSG_PREHEAT_PLA0 "Vorwärmen PLA 1"
|
||||
#define MSG_PREHEAT_PLA1 "Vorwärmen PLA 2"
|
||||
#define MSG_PREHEAT_PLA2 "Vorwärmen PLA 3"
|
||||
#define MSG_PREHEAT_PLA012 "Vorw. PLA Alle"
|
||||
#define MSG_PREHEAT_PLA_BEDONLY "Vorw. PLA Bett"
|
||||
#define MSG_PREHEAT_PLA_SETTINGS "Vorwärm. PLA Ein."
|
||||
#define MSG_PREHEAT_ABS "Vorwärmen ABS"
|
||||
#define MSG_PREHEAT_ABS0 "Vorwärmen ABS 1"
|
||||
#define MSG_PREHEAT_ABS1 "Vorwärmen ABS 2"
|
||||
#define MSG_PREHEAT_ABS2 "Vorwärmen ABS 3"
|
||||
#define MSG_PREHEAT_ABS012 "Vorw. ABS Alle"
|
||||
#define MSG_PREHEAT_ABS_BEDONLY "Vorw. ABS Bett"
|
||||
#define MSG_PREHEAT_ABS_SETTINGS "Vorwärm. ABS Ein."
|
||||
#define MSG_COOLDOWN "Abkühlen"
|
||||
#define MSG_SWITCH_PS_ON "Switch Power On"
|
||||
@ -832,8 +871,18 @@
|
||||
#define MSG_AUTO_HOME "Llevar al origen"
|
||||
#define MSG_SET_ORIGIN "Establecer cero"
|
||||
#define MSG_PREHEAT_PLA "Precalentar PLA"
|
||||
#define MSG_PREHEAT_PLA0 "Precalentar PLA 1"
|
||||
#define MSG_PREHEAT_PLA1 "Precalentar PLA 2"
|
||||
#define MSG_PREHEAT_PLA2 "Precalentar PLA 3"
|
||||
#define MSG_PREHEAT_PLA012 "Precal. PLA Todo"
|
||||
#define MSG_PREHEAT_PLA_BEDONLY "Precal. PLA Base"
|
||||
#define MSG_PREHEAT_PLA_SETTINGS "Ajustar temp. PLA"
|
||||
#define MSG_PREHEAT_ABS "Precalentar ABS"
|
||||
#define MSG_PREHEAT_ABS0 "Precalentar ABS 1"
|
||||
#define MSG_PREHEAT_ABS1 "Precalentar ABS 2"
|
||||
#define MSG_PREHEAT_ABS2 "Precalentar ABS 3"
|
||||
#define MSG_PREHEAT_ABS012 "Precal. ABS Todo"
|
||||
#define MSG_PREHEAT_ABS_BEDONLY "Precal. ABS Base"
|
||||
#define MSG_PREHEAT_ABS_SETTINGS "Ajustar temp. ABS"
|
||||
#define MSG_COOLDOWN "Enfriar"
|
||||
#define MSG_SWITCH_PS_ON "Switch Power On"
|
||||
@ -1017,7 +1066,7 @@
|
||||
// LCD Menu Messages
|
||||
// Please note these are limited to 17 characters!
|
||||
|
||||
#define WELCOME_MSG MACHINE_NAME " Готов."
|
||||
#define WELCOME_MSG MACHINE_NAME "Готов."
|
||||
#define MSG_SD_INSERTED "Карта вставлена"
|
||||
#define MSG_SD_REMOVED "Карта извлечена"
|
||||
#define MSG_MAIN "Меню \003"
|
||||
@ -1026,8 +1075,18 @@
|
||||
#define MSG_AUTO_HOME "Парковка"
|
||||
#define MSG_SET_ORIGIN "Запомнить ноль"
|
||||
#define MSG_PREHEAT_PLA "Преднагрев PLA"
|
||||
#define MSG_PREHEAT_PLA0 "Преднагрев PLA0"
|
||||
#define MSG_PREHEAT_PLA1 "Преднагрев PLA1"
|
||||
#define MSG_PREHEAT_PLA2 "Преднагрев PLA2"
|
||||
#define MSG_PREHEAT_PLA012 "Преднаг. PLA все"
|
||||
#define MSG_PREHEAT_PLA_BEDONLY "Пред. PLA Кровать"
|
||||
#define MSG_PREHEAT_PLA_SETTINGS "Настройки PLA"
|
||||
#define MSG_PREHEAT_ABS "Преднагрев ABS"
|
||||
#define MSG_PREHEAT_ABS0 "Преднагрев ABS0"
|
||||
#define MSG_PREHEAT_ABS1 "Преднагрев ABS1"
|
||||
#define MSG_PREHEAT_ABS2 "Преднагрев ABS2"
|
||||
#define MSG_PREHEAT_ABS012 "Преднаг. ABS все "
|
||||
#define MSG_PREHEAT_ABS_BEDONLY "Пред. ABS Кровать"
|
||||
#define MSG_PREHEAT_ABS_SETTINGS "Настройки ABS"
|
||||
#define MSG_COOLDOWN "Охлаждение"
|
||||
#define MSG_SWITCH_PS_ON "Switch Power On"
|
||||
@ -1091,8 +1150,8 @@
|
||||
#define MSG_WATCH "Обзор \003"
|
||||
#define MSG_PREPARE "Действия \x7E"
|
||||
#define MSG_TUNE "Настройки \x7E"
|
||||
#define MSG_RESUME_PRINT "Продолжить печать"
|
||||
#define MSG_RESUME_PRINT "Продолжить печать"
|
||||
#define MSG_PAUSE_PRINT "Продолжить печать"
|
||||
#define MSG_RESUME_PRINT "возобн. печать"
|
||||
#define MSG_STOP_PRINT "Остановить печать"
|
||||
#define MSG_CARD_MENU "Меню карты \x7E"
|
||||
#define MSG_NO_CARD "Нет карты"
|
||||
@ -1211,8 +1270,18 @@
|
||||
#define MSG_AUTO_HOME "Auto Home"
|
||||
#define MSG_SET_ORIGIN "Imposta Origine"
|
||||
#define MSG_PREHEAT_PLA "Preriscalda PLA"
|
||||
#define MSG_PREHEAT_PLA0 "Preriscalda PLA 1"
|
||||
#define MSG_PREHEAT_PLA1 "Preriscalda PLA 2"
|
||||
#define MSG_PREHEAT_PLA2 "Preriscalda PLA 3"
|
||||
#define MSG_PREHEAT_PLA012 "Preris. PLA Tutto"
|
||||
#define MSG_PREHEAT_PLA_BEDONLY "Preri. PLA Piatto"
|
||||
#define MSG_PREHEAT_PLA_SETTINGS "Preris. PLA Conf"
|
||||
#define MSG_PREHEAT_ABS "Preriscalda ABS"
|
||||
#define MSG_PREHEAT_ABS0 "Preriscalda ABS 1"
|
||||
#define MSG_PREHEAT_ABS1 "Preriscalda ABS 2"
|
||||
#define MSG_PREHEAT_ABS2 "Preriscalda ABS 3"
|
||||
#define MSG_PREHEAT_ABS012 "Preris. ABS Tutto"
|
||||
#define MSG_PREHEAT_ABS_BEDONLY "Preri. ABS Piatto"
|
||||
#define MSG_PREHEAT_ABS_SETTINGS "Preris. ABS Conf"
|
||||
#define MSG_COOLDOWN "Raffredda"
|
||||
#define MSG_SWITCH_PS_ON "Switch Power On"
|
||||
@ -1398,8 +1467,18 @@
|
||||
#define MSG_AUTO_HOME "Ir para origen"
|
||||
#define MSG_SET_ORIGIN "Estabelecer orig."
|
||||
#define MSG_PREHEAT_PLA "Pre-aquecer PLA"
|
||||
#define MSG_PREHEAT_PLA0 " pre-aquecer PLA 1"
|
||||
#define MSG_PREHEAT_PLA1 " pre-aquecer PLA 2"
|
||||
#define MSG_PREHEAT_PLA2 " pre-aquecer PLA 3"
|
||||
#define MSG_PREHEAT_PLA012 " pre-aq. PLA Tudo"
|
||||
#define MSG_PREHEAT_PLA_BEDONLY " pre-aq. PLA \002Base"
|
||||
#define MSG_PREHEAT_PLA_SETTINGS "PLA setting"
|
||||
#define MSG_PREHEAT_ABS "Pre-aquecer ABS"
|
||||
#define MSG_PREHEAT_ABS0 " pre-aquecer ABS 1"
|
||||
#define MSG_PREHEAT_ABS1 " pre-aquecer ABS 2"
|
||||
#define MSG_PREHEAT_ABS2 " pre-aquecer ABS 3"
|
||||
#define MSG_PREHEAT_ABS012 " pre-aq. ABS Tudo"
|
||||
#define MSG_PREHEAT_ABS_BEDONLY " pre-aq. ABS \002Base"
|
||||
#define MSG_PREHEAT_ABS_SETTINGS "ABS setting"
|
||||
#define MSG_COOLDOWN "Esfriar"
|
||||
#define MSG_SWITCH_PS_ON "Switch Power On"
|
||||
@ -1592,8 +1671,18 @@
|
||||
#define MSG_AUTO_HOME "Aja referenssiin"
|
||||
#define MSG_SET_ORIGIN "Aseta origo"
|
||||
#define MSG_PREHEAT_PLA "Esilammita PLA"
|
||||
#define MSG_PREHEAT_PLA0 "Esilammita PLA 1"
|
||||
#define MSG_PREHEAT_PLA1 "Esilammita PLA 2"
|
||||
#define MSG_PREHEAT_PLA2 "Esilammita PLA 3"
|
||||
#define MSG_PREHEAT_PLA012 "Esila. PLA Kaikki"
|
||||
#define MSG_PREHEAT_PLA_BEDONLY "Esila. PLA Alusta"
|
||||
#define MSG_PREHEAT_PLA_SETTINGS "Esilamm. PLA konf"
|
||||
#define MSG_PREHEAT_ABS "Esilammita ABS"
|
||||
#define MSG_PREHEAT_ABS0 "Esilammita ABS 1"
|
||||
#define MSG_PREHEAT_ABS1 "Esilammita ABS 2"
|
||||
#define MSG_PREHEAT_ABS2 "Esilammita ABS 3"
|
||||
#define MSG_PREHEAT_ABS012 "Esila. ABS Kaikki"
|
||||
#define MSG_PREHEAT_ABS_BEDONLY "Esila. ABS Alusta"
|
||||
#define MSG_PREHEAT_ABS_SETTINGS "Esilamm. ABS konf"
|
||||
#define MSG_COOLDOWN "Jaahdyta"
|
||||
#define MSG_SWITCH_PS_ON "Virta paalle"
|
||||
@ -1779,8 +1868,18 @@
|
||||
#define MSG_AUTO_HOME "Levar a l'orichen"
|
||||
#define MSG_SET_ORIGIN "Establir zero"
|
||||
#define MSG_PREHEAT_PLA "Precalentar PLA"
|
||||
#define MSG_PREHEAT_PLA0 "Precalentar PLA0"
|
||||
#define MSG_PREHEAT_PLA1 "Precalentar PLA1"
|
||||
#define MSG_PREHEAT_PLA2 "Precalentar PLA2"
|
||||
#define MSG_PREHEAT_PLA012 "Precalentar PLA a"
|
||||
#define MSG_PREHEAT_PLA_BEDONLY "Prec. PLA Base"
|
||||
#define MSG_PREHEAT_PLA_SETTINGS "Achustar tem. PLA"
|
||||
#define MSG_PREHEAT_ABS "Precalentar ABS"
|
||||
#define MSG_PREHEAT_ABS0 "Precalentar ABS0"
|
||||
#define MSG_PREHEAT_ABS1 "Precalentar ABS1"
|
||||
#define MSG_PREHEAT_ABS2 "Precalentar ABS2"
|
||||
#define MSG_PREHEAT_ABS012 "Precalentar ABS a"
|
||||
#define MSG_PREHEAT_ABS_BEDONLY "Prec. ABS Base"
|
||||
#define MSG_PREHEAT_ABS_SETTINGS "Achustar tem. ABS"
|
||||
#define MSG_COOLDOWN "Enfriar"
|
||||
#define MSG_SWITCH_PS_ON "Enchegar Fuent"
|
||||
@ -1972,8 +2071,18 @@
|
||||
#define MSG_AUTO_HOME "Auto home"
|
||||
#define MSG_SET_ORIGIN "Nulpunt instellen"
|
||||
#define MSG_PREHEAT_PLA "PLA voorverwarmen"
|
||||
#define MSG_PREHEAT_PLA0 "PLA voorverw. 0"
|
||||
#define MSG_PREHEAT_PLA1 "PLA voorverw. 1"
|
||||
#define MSG_PREHEAT_PLA2 "PLA voorverw. 2"
|
||||
#define MSG_PREHEAT_PLA012 "PLA voorverw. aan"
|
||||
#define MSG_PREHEAT_PLA_BEDONLY "PLA voorverw. Bed"
|
||||
#define MSG_PREHEAT_PLA_SETTINGS "PLA verw. conf"
|
||||
#define MSG_PREHEAT_ABS "ABS voorverwarmen"
|
||||
#define MSG_PREHEAT_ABS0 "ABS voorverw. 0"
|
||||
#define MSG_PREHEAT_ABS1 "ABS voorverw. 1"
|
||||
#define MSG_PREHEAT_ABS2 "ABS voorverw. 2"
|
||||
#define MSG_PREHEAT_ABS012 "ABS voorverw. aan"
|
||||
#define MSG_PREHEAT_ABS_BEDONLY "ABS voorverw. Bed"
|
||||
#define MSG_PREHEAT_ABS_SETTINGS "ABS verw. conf"
|
||||
#define MSG_COOLDOWN "Afkoelen"
|
||||
#define MSG_SWITCH_PS_ON "Stroom aan"
|
||||
@ -1995,6 +2104,9 @@
|
||||
#define MSG_BED "Bed"
|
||||
#define MSG_FAN_SPEED "Fan snelheid"
|
||||
#define MSG_FLOW "Flow"
|
||||
#define MSG_FLOW0 "Flow 0"
|
||||
#define MSG_FLOW1 "Flow 1"
|
||||
#define MSG_FLOW2 "Flow 2"
|
||||
#define MSG_CONTROL "Control"
|
||||
#define MSG_MIN " \002 Min"
|
||||
#define MSG_MAX " \002 Max"
|
||||
@ -2087,6 +2199,7 @@
|
||||
#define MSG_M105_INVALID_EXTRUDER "M105 Ongeldige extruder "
|
||||
#define MSG_M200_INVALID_EXTRUDER "M200 Ongeldige extruder "
|
||||
#define MSG_M218_INVALID_EXTRUDER "M218 Ongeldige extruder "
|
||||
#define MSG_M221_INVALID_EXTRUDER "M221 Ongeldige extruder "
|
||||
#define MSG_ERR_NO_THERMISTORS "Geen thermistors - geen temperatuur"
|
||||
#define MSG_M109_INVALID_EXTRUDER "M109 Ongeldige extruder "
|
||||
#define MSG_HEATING "Opwarmen..."
|
||||
|
@ -304,37 +304,6 @@ static void lcd_autostart_sd()
|
||||
}
|
||||
#endif
|
||||
|
||||
void lcd_preheat_pla()
|
||||
{
|
||||
setTargetHotend0(plaPreheatHotendTemp);
|
||||
setTargetHotend1(plaPreheatHotendTemp);
|
||||
setTargetHotend2(plaPreheatHotendTemp);
|
||||
setTargetBed(plaPreheatHPBTemp);
|
||||
fanSpeed = plaPreheatFanSpeed;
|
||||
lcd_return_to_status();
|
||||
setWatch(); // heater sanity check timer
|
||||
}
|
||||
|
||||
void lcd_preheat_abs()
|
||||
{
|
||||
setTargetHotend0(absPreheatHotendTemp);
|
||||
setTargetHotend1(absPreheatHotendTemp);
|
||||
setTargetHotend2(absPreheatHotendTemp);
|
||||
setTargetBed(absPreheatHPBTemp);
|
||||
fanSpeed = absPreheatFanSpeed;
|
||||
lcd_return_to_status();
|
||||
setWatch(); // heater sanity check timer
|
||||
}
|
||||
|
||||
static void lcd_cooldown()
|
||||
{
|
||||
setTargetHotend0(0);
|
||||
setTargetHotend1(0);
|
||||
setTargetHotend2(0);
|
||||
setTargetBed(0);
|
||||
lcd_return_to_status();
|
||||
}
|
||||
|
||||
#ifdef BABYSTEPPING
|
||||
static void lcd_babystep_x()
|
||||
{
|
||||
@ -435,6 +404,154 @@ static void lcd_tune_menu()
|
||||
END_MENU();
|
||||
}
|
||||
|
||||
void lcd_preheat_pla0()
|
||||
{
|
||||
setTargetHotend0(plaPreheatHotendTemp);
|
||||
setTargetBed(plaPreheatHPBTemp);
|
||||
fanSpeed = plaPreheatFanSpeed;
|
||||
lcd_return_to_status();
|
||||
setWatch(); // heater sanity check timer
|
||||
}
|
||||
|
||||
void lcd_preheat_abs0()
|
||||
{
|
||||
setTargetHotend0(absPreheatHotendTemp);
|
||||
setTargetBed(absPreheatHPBTemp);
|
||||
fanSpeed = absPreheatFanSpeed;
|
||||
lcd_return_to_status();
|
||||
setWatch(); // heater sanity check timer
|
||||
}
|
||||
|
||||
#if TEMP_SENSOR_1 != 0 //2nd extruder preheat
|
||||
void lcd_preheat_pla1()
|
||||
{
|
||||
setTargetHotend1(plaPreheatHotendTemp);
|
||||
setTargetBed(plaPreheatHPBTemp);
|
||||
fanSpeed = plaPreheatFanSpeed;
|
||||
lcd_return_to_status();
|
||||
setWatch(); // heater sanity check timer
|
||||
}
|
||||
|
||||
void lcd_preheat_abs1()
|
||||
{
|
||||
setTargetHotend1(absPreheatHotendTemp);
|
||||
setTargetBed(absPreheatHPBTemp);
|
||||
fanSpeed = absPreheatFanSpeed;
|
||||
lcd_return_to_status();
|
||||
setWatch(); // heater sanity check timer
|
||||
}
|
||||
#endif //2nd extruder preheat
|
||||
|
||||
#if TEMP_SENSOR_2 != 0 //3 extruder preheat
|
||||
void lcd_preheat_pla2()
|
||||
{
|
||||
setTargetHotend2(plaPreheatHotendTemp);
|
||||
setTargetBed(plaPreheatHPBTemp);
|
||||
fanSpeed = plaPreheatFanSpeed;
|
||||
lcd_return_to_status();
|
||||
setWatch(); // heater sanity check timer
|
||||
}
|
||||
|
||||
void lcd_preheat_abs2()
|
||||
{
|
||||
setTargetHotend2(absPreheatHotendTemp);
|
||||
setTargetBed(absPreheatHPBTemp);
|
||||
fanSpeed = absPreheatFanSpeed;
|
||||
lcd_return_to_status();
|
||||
setWatch(); // heater sanity check timer
|
||||
}
|
||||
#endif //3 extruder preheat
|
||||
|
||||
#if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 //more than one extruder present
|
||||
void lcd_preheat_pla012()
|
||||
{
|
||||
setTargetHotend0(plaPreheatHotendTemp);
|
||||
setTargetHotend1(plaPreheatHotendTemp);
|
||||
setTargetHotend2(plaPreheatHotendTemp);
|
||||
setTargetBed(plaPreheatHPBTemp);
|
||||
fanSpeed = plaPreheatFanSpeed;
|
||||
lcd_return_to_status();
|
||||
setWatch(); // heater sanity check timer
|
||||
}
|
||||
|
||||
void lcd_preheat_abs012()
|
||||
{
|
||||
setTargetHotend0(absPreheatHotendTemp);
|
||||
setTargetHotend1(absPreheatHotendTemp);
|
||||
setTargetHotend2(absPreheatHotendTemp);
|
||||
setTargetBed(absPreheatHPBTemp);
|
||||
fanSpeed = absPreheatFanSpeed;
|
||||
lcd_return_to_status();
|
||||
setWatch(); // heater sanity check timer
|
||||
}
|
||||
#endif //more than one extruder present
|
||||
|
||||
void lcd_preheat_pla_bedonly()
|
||||
{
|
||||
setTargetBed(plaPreheatHPBTemp);
|
||||
fanSpeed = plaPreheatFanSpeed;
|
||||
lcd_return_to_status();
|
||||
setWatch(); // heater sanity check timer
|
||||
}
|
||||
|
||||
void lcd_preheat_abs_bedonly()
|
||||
{
|
||||
setTargetBed(absPreheatHPBTemp);
|
||||
fanSpeed = absPreheatFanSpeed;
|
||||
lcd_return_to_status();
|
||||
setWatch(); // heater sanity check timer
|
||||
}
|
||||
|
||||
static void lcd_preheat_pla_menu()
|
||||
{
|
||||
START_MENU();
|
||||
MENU_ITEM(back, MSG_PREPARE, lcd_prepare_menu);
|
||||
MENU_ITEM(function, MSG_PREHEAT_PLA0, lcd_preheat_pla0);
|
||||
#if TEMP_SENSOR_1 != 0 //2 extruder preheat
|
||||
MENU_ITEM(function, MSG_PREHEAT_PLA1, lcd_preheat_pla1);
|
||||
#endif //2 extruder preheat
|
||||
#if TEMP_SENSOR_2 != 0 //3 extruder preheat
|
||||
MENU_ITEM(function, MSG_PREHEAT_PLA2, lcd_preheat_pla2);
|
||||
#endif //3 extruder preheat
|
||||
#if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 //all extruder preheat
|
||||
MENU_ITEM(function, MSG_PREHEAT_PLA012, lcd_preheat_pla012);
|
||||
#endif //2 extruder preheat
|
||||
#if TEMP_SENSOR_BED != 0
|
||||
MENU_ITEM(function, MSG_PREHEAT_PLA_BEDONLY, lcd_preheat_pla_bedonly);
|
||||
#endif
|
||||
END_MENU();
|
||||
}
|
||||
|
||||
static void lcd_preheat_abs_menu()
|
||||
{
|
||||
START_MENU();
|
||||
MENU_ITEM(back, MSG_PREPARE, lcd_prepare_menu);
|
||||
MENU_ITEM(function, MSG_PREHEAT_ABS0, lcd_preheat_abs0);
|
||||
#if TEMP_SENSOR_1 != 0 //2 extruder preheat
|
||||
MENU_ITEM(function, MSG_PREHEAT_ABS1, lcd_preheat_abs1);
|
||||
#endif //2 extruder preheat
|
||||
#if TEMP_SENSOR_2 != 0 //3 extruder preheat
|
||||
MENU_ITEM(function, MSG_PREHEAT_ABS2, lcd_preheat_abs2);
|
||||
#endif //3 extruder preheat
|
||||
#if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 //all extruder preheat
|
||||
MENU_ITEM(function, MSG_PREHEAT_ABS012, lcd_preheat_abs012);
|
||||
#endif //2 extruder preheat
|
||||
#if TEMP_SENSOR_BED != 0
|
||||
MENU_ITEM(function, MSG_PREHEAT_ABS_BEDONLY, lcd_preheat_abs_bedonly);
|
||||
#endif
|
||||
END_MENU();
|
||||
}
|
||||
|
||||
void lcd_cooldown()
|
||||
{
|
||||
setTargetHotend0(0);
|
||||
setTargetHotend1(0);
|
||||
setTargetHotend2(0);
|
||||
setTargetBed(0);
|
||||
fanSpeed = 0;
|
||||
lcd_return_to_status();
|
||||
}
|
||||
|
||||
static void lcd_prepare_menu()
|
||||
{
|
||||
START_MENU();
|
||||
@ -447,8 +564,15 @@ static void lcd_prepare_menu()
|
||||
MENU_ITEM(gcode, MSG_DISABLE_STEPPERS, PSTR("M84"));
|
||||
MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28"));
|
||||
//MENU_ITEM(gcode, MSG_SET_ORIGIN, PSTR("G92 X0 Y0 Z0"));
|
||||
MENU_ITEM(function, MSG_PREHEAT_PLA, lcd_preheat_pla);
|
||||
MENU_ITEM(function, MSG_PREHEAT_ABS, lcd_preheat_abs);
|
||||
#if TEMP_SENSOR_0 != 0
|
||||
#if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_BED != 0
|
||||
MENU_ITEM(submenu, MSG_PREHEAT_PLA, lcd_preheat_pla_menu);
|
||||
MENU_ITEM(submenu, MSG_PREHEAT_ABS, lcd_preheat_abs_menu);
|
||||
#else
|
||||
MENU_ITEM(function, MSG_PREHEAT_PLA, lcd_preheat_pla0);
|
||||
MENU_ITEM(function, MSG_PREHEAT_ABS, lcd_preheat_abs0);
|
||||
#endif
|
||||
#endif
|
||||
MENU_ITEM(function, MSG_COOLDOWN, lcd_cooldown);
|
||||
#if PS_ON_PIN > -1
|
||||
if (powersupply)
|
||||
|
Loading…
Reference in New Issue
Block a user