CMS/Marlin
3
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x

Browse Source
This commit is contained in:
Bob-the-Kuhn 2019-04-17 15:34:29 -05:00
commit 520585c5ed
208 changed files with 1900 additions and 418 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
Marlin/Configuration.h
View File

@ -927,6 +927,9 @@
// Before deploy/stow pause for user confirmation // Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW //#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/** /**
* Enable one or more of the following if probing seems unreliable. * Enable one or more of the following if probing seems unreliable.

11
Marlin/Configuration_adv.h
View File

@ -905,6 +905,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

259
Marlin/src/HAL/HAL_ESP32/WebSocketSerial.cpp
View File

@ -21,57 +21,89 @@
*/ */
#ifdef ARDUINO_ARCH_ESP32 #ifdef ARDUINO_ARCH_ESP32
#include "../../inc/MarlinConfig.h" #include "../../inc/MarlinConfigPre.h"
#if ENABLED(WIFISUPPORT) #if ENABLED(WIFISUPPORT)
#include "WebSocketSerial.h" #include "WebSocketSerial.h"
extern WebSocketSerial webSocketSerial;
#include "wifi.h" #include "wifi.h"
#include <AsyncTCP.h>
#include <ESPAsyncWebServer.h> #include <ESPAsyncWebServer.h>
struct ring_buffer_r { WebSocketSerial webSocketSerial;
unsigned char buffer[RX_BUFFER_SIZE]; AsyncWebSocket ws("/ws"); // TODO Move inside the class.
volatile ring_buffer_pos_t head, tail;
};
struct ring_buffer_t { // RingBuffer impl
unsigned char buffer[256];
volatile uint8_t head, tail;
};
ring_buffer_r rx_buffer = { { 0 }, 0, 0 }; #define NEXT_INDEX(I, SIZE) ((I + 1) & (ring_buffer_pos_t)(SIZE - 1))
ring_buffer_t tx_buffer = { { 0 }, 0, 0 };
static bool _written; RingBuffer::RingBuffer(ring_buffer_pos_t size)
: data(new uint8_t[size]),
read_index(0),
write_index(0),
size(size)
{}
#if ENABLED(EMERGENCY_PARSER) RingBuffer::~RingBuffer() { delete[] data; }
static EmergencyParser::State emergency_state; // = EP_RESET
#endif
AsyncWebSocket ws("/ws"); // access at ws://[esp ip]/ws ring_buffer_pos_t RingBuffer::write(const uint8_t c) {
const ring_buffer_pos_t n = NEXT_INDEX(write_index, size);
FORCE_INLINE int next_rx_index(const int i) { return (ring_buffer_pos_t)(i + 1) & (ring_buffer_pos_t)(RX_BUFFER_SIZE - 1); } if (n != read_index) {
FORCE_INLINE int next_tx_index(const int i) { return (ring_buffer_pos_t)(i + 1) & (ring_buffer_pos_t)(TX_BUFFER_SIZE - 1); } this->data[write_index] = c;
write_index = n;
static void addToBuffer(uint8_t * const data, const size_t len) { return 1;
for (size_t i = 0; i < len; i++) { }
ring_buffer_pos_t h = rx_buffer.head;
const ring_buffer_pos_t t = rx_buffer.tail, n = next_rx_index(h);
if (n != t) { rx_buffer.buffer[h] = data[i]; h = n; }
// TODO: buffer is full, handle? // TODO: buffer is full, handle?
return 0;
rx_buffer.head = h;
}
} }
// Handle WebSocket event ring_buffer_pos_t RingBuffer::write(const uint8_t *buffer, ring_buffer_pos_t size) {
static void onEvent(AsyncWebSocket * server, AsyncWebSocketClient * client, AwsEventType type, void * arg, uint8_t *data, size_t len) { ring_buffer_pos_t written = 0;
for (ring_buffer_pos_t i = 0; i < size; i++) {
written += write(buffer[i]);
}
return written;
}
int RingBuffer::available(void) {
return (size - read_index + write_index) & (size - 1);
}
int RingBuffer::peek(void) {
return available() ? data[read_index] : -1;
}
int RingBuffer::read(void) {
if (available()) {
const int ret = data[read_index];
read_index = NEXT_INDEX(read_index, size);
return ret;
}
return -1;
}
ring_buffer_pos_t RingBuffer::read(uint8_t *buffer) {
ring_buffer_pos_t len = available();
for(ring_buffer_pos_t i = 0; read_index != write_index; i++) {
buffer[i] = data[read_index];
read_index = NEXT_INDEX(read_index, size);
}
return len;
}
void RingBuffer::flush(void) { read_index = write_index; }
// WebSocketSerial impl
WebSocketSerial::WebSocketSerial()
: rx_buffer(RingBuffer(RX_BUFFER_SIZE)),
tx_buffer(RingBuffer(TX_BUFFER_SIZE))
{}
void WebSocketSerial::begin(const long baud_setting) {
ws.onEvent([this](AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventType type, void *arg, uint8_t *data, size_t len) {
switch (type) { switch (type) {
case WS_EVT_CONNECT: client->ping(); break; // client connected case WS_EVT_CONNECT: client->ping(); break; // client connected
case WS_EVT_DISCONNECT: // client disconnected case WS_EVT_DISCONNECT: // client disconnected
@ -80,154 +112,41 @@ static void onEvent(AsyncWebSocket * server, AsyncWebSocketClient * client, AwsE
case WS_EVT_DATA: { // data packet case WS_EVT_DATA: { // data packet
AwsFrameInfo * info = (AwsFrameInfo*)arg; AwsFrameInfo * info = (AwsFrameInfo*)arg;
if (info->opcode == WS_TEXT || info->message_opcode == WS_TEXT) if (info->opcode == WS_TEXT || info->message_opcode == WS_TEXT)
addToBuffer(data, len); this->rx_buffer.write(data, len);
} }
} }
} });
server.addHandler(&ws);
// Public Methods
void WebSocketSerial::begin(const long baud_setting) {
ws.onEvent(onEvent);
server.addHandler(&ws); // attach AsyncWebSocket
} }
void WebSocketSerial::end() { } void WebSocketSerial::end() { }
int WebSocketSerial::peek(void) { return rx_buffer.peek(); }
int WebSocketSerial::read(void) { return rx_buffer.read(); }
int WebSocketSerial::available(void) { return rx_buffer.available(); }
void WebSocketSerial::flush(void) { rx_buffer.flush(); }
int WebSocketSerial::peek(void) { size_t WebSocketSerial::write(const uint8_t c) {
const int v = rx_buffer.head == rx_buffer.tail ? -1 : rx_buffer.buffer[rx_buffer.tail]; size_t ret = tx_buffer.write(c);
return v;
if (ret && c == '\n') {
uint8_t tmp[TX_BUFFER_SIZE];
ring_buffer_pos_t size = tx_buffer.read(tmp);
ws.textAll(tmp, size);
} }
int WebSocketSerial::read(void) { return ret;
const ring_buffer_pos_t h = rx_buffer.head, t = rx_buffer.tail;
if (h == t) return -1; // Nothing to read? Return now
const int v = rx_buffer.buffer[t];
rx_buffer.tail = (ring_buffer_pos_t)(t + 1) & (RX_BUFFER_SIZE - 1); // Advance tail
return v;
} }
bool WebSocketSerial::available(void) { size_t WebSocketSerial::write(const uint8_t* buffer, size_t size) {
const ring_buffer_pos_t h = rx_buffer.head, t = rx_buffer.tail; size_t written = 0;
return (ring_buffer_pos_t)(RX_BUFFER_SIZE + h - t) & (RX_BUFFER_SIZE - 1); for(size_t i = 0; i < size; i++) {
written += write(buffer[i]);
}
return written;
} }
void WebSocketSerial::flush(void) { void WebSocketSerial::flushTX(void) {
ws.textAll("flush"); // No need to do anything as there's no benefit to sending partial lines over the websocket connection.
rx_buffer.tail = rx_buffer.head;
}
#if TX_BUFFER_SIZE
void WebSocketSerial::write(const uint8_t c) {
_written = true;
const uint8_t i = (tx_buffer.head + 1) & (TX_BUFFER_SIZE - 1);
// Store new char. head is always safe to move
tx_buffer.buffer[tx_buffer.head] = c;
tx_buffer.head = i;
if (c == '\n') {
ws.textAll(tx_buffer.buffer, tx_buffer.head);
tx_buffer.head = 0;
}
}
void WebSocketSerial::flushTx(void) {
ws.textAll("flushTx");
if (!_written) return;
}
#else
//void WebSocketSerial::write(const uint8_t c) { _written = true; }
//void WebSocketSerial::flushTx(void) { if (!_written) return; }
#endif
/**
* Imports from print.h
*/
void WebSocketSerial::print(char c, int base) { print((long)c, base); }
void WebSocketSerial::print(unsigned char b, int base) { print((unsigned long)b, base); }
void WebSocketSerial::print(int n, int base) { print((long)n, base); }
void WebSocketSerial::print(unsigned int n, int base) { print((unsigned long)n, base); }
void WebSocketSerial::print(long n, int base) {
if (base == 0)
write(n);
else if (base == 10) {
if (n < 0) { print('-'); n = -n; }
printNumber(n, 10);
}
else
printNumber(n, base);
}
void WebSocketSerial::print(unsigned long n, int base) {
if (base == 0) write(n); else printNumber(n, base);
}
void WebSocketSerial::print(double n, int digits) { printFloat(n, digits); }
void WebSocketSerial::println(void) { print('\r'); print('\n'); }
void WebSocketSerial::println(const String& s) { print(s); println(); }
void WebSocketSerial::println(const char c[]) { print(c); println(); }
void WebSocketSerial::println(char c, int base) { print(c, base); println(); }
void WebSocketSerial::println(unsigned char b, int base) { print(b, base); println(); }
void WebSocketSerial::println(int n, int base) { print(n, base); println(); }
void WebSocketSerial::println(unsigned int n, int base) { print(n, base); println(); }
void WebSocketSerial::println(long n, int base) { print(n, base); println(); }
void WebSocketSerial::println(unsigned long n, int base) { print(n, base); println(); }
void WebSocketSerial::println(double n, int digits) { print(n, digits); println(); }
// Private Methods
void WebSocketSerial::printNumber(unsigned long n, uint8_t base) {
if (n) {
unsigned char buf[8 * sizeof(long)]; // Enough space for base 2
int8_t i = 0;
while (n) {
buf[i++] = n % base;
n /= base;
}
while (i--)
print((char)(buf[i] + (buf[i] < 10 ? '0' : 'A' - 10)));
}
else
print('0');
}
void WebSocketSerial::printFloat(double number, uint8_t digits) {
// Handle negative numbers
if (number < 0.0) { print('-'); number = -number; }
// Round correctly so that print(1.999, 2) prints as "2.00"
// Use a lookup table for performance
constexpr double rounds[] = { 0.5, 0.05, 0.005, 0.0005, 0.00005, 0.000005, 0.0000005, 0.00000005 };
number += rounds[digits];
//number += pow(10, -(digits + 1)); // slower single-line equivalent
// Extract the integer part of the number and print it
unsigned long int_part = (unsigned long)number;
print(int_part);
// Print the decimal point, but only if there are digits beyond
double remainder = number - (double)int_part;
if (digits) {
print('.');
// Extract digits from the remainder one at a time
while (digits--) {
remainder *= 10.0;
const int toPrint = int(remainder);
print(toPrint);
remainder -= toPrint;
}
}
} }
#endif // WIFISUPPORT #endif // WIFISUPPORT

87
Marlin/src/HAL/HAL_ESP32/WebSocketSerial.h
View File

@ -23,12 +23,7 @@
#include "../../inc/MarlinConfig.h" #include "../../inc/MarlinConfig.h"
#include <WString.h> #include "Stream.h"
#define DEC 10
#define HEX 16
#define OCT 8
#define BIN 2
#ifndef RX_BUFFER_SIZE #ifndef RX_BUFFER_SIZE
#define RX_BUFFER_SIZE 128 #define RX_BUFFER_SIZE 128
@ -40,60 +35,50 @@
#error "TX_BUFFER_SIZE is required for the WebSocket." #error "TX_BUFFER_SIZE is required for the WebSocket."
#endif #endif
#if RX_BUFFER_SIZE > 256
typedef uint16_t ring_buffer_pos_t; typedef uint16_t ring_buffer_pos_t;
#else
typedef uint8_t ring_buffer_pos_t;
#endif
class WebSocketSerial { class RingBuffer {
uint8_t *data;
ring_buffer_pos_t size, read_index, write_index;
public: public:
WebSocketSerial() {}; RingBuffer(ring_buffer_pos_t size);
static void begin(const long); ~RingBuffer();
static void end();
static int peek(void); int available(void);
static int read(void); int peek(void);
static void flush(void); int read(void);
static void flushTx(void); ring_buffer_pos_t read(uint8_t *buffer);
static bool available(void); void flush(void);
static void write(const uint8_t c); ring_buffer_pos_t write(const uint8_t c);
ring_buffer_pos_t write(const uint8_t* buffer, ring_buffer_pos_t size);
};
class WebSocketSerial: public Stream {
RingBuffer rx_buffer;
RingBuffer tx_buffer;
public:
WebSocketSerial();
void begin(const long);
void end();
int available(void);
int peek(void);
int read(void);
void flush(void);
void flushTX(void);
size_t write(const uint8_t c);
size_t write(const uint8_t* buffer, size_t size);
operator bool() { return true; }
#if ENABLED(SERIAL_STATS_DROPPED_RX) #if ENABLED(SERIAL_STATS_DROPPED_RX)
FORCE_INLINE static uint32_t dropped() { return 0; } FORCE_INLINE uint32_t dropped() { return 0; }
#endif #endif
#if ENABLED(SERIAL_STATS_MAX_RX_QUEUED) #if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
FORCE_INLINE static int rxMaxEnqueued() { return 0; } FORCE_INLINE int rxMaxEnqueued() { return 0; }
#endif #endif
FORCE_INLINE static void write(const char* str) { while (*str) write(*str++); }
FORCE_INLINE static void write(const uint8_t* buffer, size_t size) { while (size--) write(*buffer++); }
FORCE_INLINE static void print(const String& s) { for (int i = 0; i < (int)s.length(); i++) write(s[i]); }
FORCE_INLINE static void print(const char* str) { write(str); }
static void print(char, int = 0);
static void print(unsigned char, int = 0);
static void print(int, int = DEC);
static void print(unsigned int, int = DEC);
static void print(long, int = DEC);
static void print(unsigned long, int = DEC);
static void print(double, int = 2);
static void println(const String& s);
static void println(const char[]);
static void println(char, int = 0);
static void println(unsigned char, int = 0);
static void println(int, int = DEC);
static void println(unsigned int, int = DEC);
static void println(long, int = DEC);
static void println(unsigned long, int = DEC);
static void println(double, int = 2);
static void println(void);
operator bool() { return true; }
private:
static void printNumber(unsigned long, const uint8_t);
static void printFloat(double, uint8_t);
}; };
extern WebSocketSerial webSocketSerial; extern WebSocketSerial webSocketSerial;

6
Marlin/src/HAL/HAL_ESP32/i2s.cpp
View File

@ -303,9 +303,9 @@ int i2s_init() {
xTaskCreate(stepperTask, "StepperTask", 10000, NULL, 1, NULL); xTaskCreate(stepperTask, "StepperTask", 10000, NULL, 1, NULL);
// Route the i2s pins to the appropriate GPIO // Route the i2s pins to the appropriate GPIO
gpio_matrix_out_check(22, I2S0O_DATA_OUT23_IDX, 0, 0); gpio_matrix_out_check(I2S_DATA, I2S0O_DATA_OUT23_IDX, 0, 0);
gpio_matrix_out_check(25, I2S0O_WS_OUT_IDX, 0, 0); gpio_matrix_out_check(I2S_BCK, I2S0O_BCK_OUT_IDX, 0, 0);
gpio_matrix_out_check(26, I2S0O_BCK_OUT_IDX, 0, 0); gpio_matrix_out_check(I2S_WS, I2S0O_WS_OUT_IDX, 0, 0);
// Start the I2S peripheral // Start the I2S peripheral
return i2s_start(I2S_NUM_0); return i2s_start(I2S_NUM_0);

6
Marlin/src/HAL/HAL_ESP32/i2s.h
View File

@ -29,3 +29,9 @@ int i2s_init();
void i2s_write(uint8_t pin, uint8_t val); void i2s_write(uint8_t pin, uint8_t val);
void i2s_push_sample(); void i2s_push_sample();
// pin definitions
#define I2S_WS 25
#define I2S_BCK 26
#define I2S_DATA 27

21
Marlin/src/HAL/HAL_LPC1768/main.cpp
View File

@ -1,3 +1,24 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
#include <usb/usb.h> #include <usb/usb.h>

10
Marlin/src/HAL/HAL_LPC1768/u8g/u8g_com_HAL_LPC1768_ssd_hw_i2c.cpp
View File

@ -137,8 +137,11 @@ uint8_t u8g_com_HAL_LPC1768_ssd_hw_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_v
case U8G_COM_MSG_WRITE_BYTE: case U8G_COM_MSG_WRITE_BYTE:
//u8g->pin_list[U8G_PI_SET_A0] = 1; //u8g->pin_list[U8G_PI_SET_A0] = 1;
//if (u8g_com_arduino_ssd_start_sequence(u8g) == 0) if (u8g_com_ssd_I2C_start_sequence(u8g) == 0) {
// return u8g_i2c_stop(), 0; u8g_i2c_stop();
return 0;
}
if (u8g_i2c_send_byte(arg_val) == 0) { if (u8g_i2c_send_byte(arg_val) == 0) {
u8g_i2c_stop(); u8g_i2c_stop();
return 0; return 0;
@ -186,9 +189,6 @@ uint8_t u8g_com_HAL_LPC1768_ssd_hw_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_v
case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */ case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
u8g->pin_list[U8G_PI_A0_STATE] = arg_val; u8g->pin_list[U8G_PI_A0_STATE] = arg_val;
u8g->pin_list[U8G_PI_SET_A0] = 1; /* force a0 to set again */ u8g->pin_list[U8G_PI_SET_A0] = 1; /* force a0 to set again */
u8g_i2c_start(0); // send slave address and write bit
u8g_i2c_send_byte(arg_val ? 0x40 : 0x80); // Write to ? Graphics DRAM mode : Command mode
break; break;
} // switch } // switch

68
Marlin/src/HAL/HAL_LPC1768/u8g/u8g_com_HAL_LPC1768_sw_spi.cpp
View File

@ -65,10 +65,76 @@
#undef SPI_SPEED #undef SPI_SPEED
#define SPI_SPEED 2 // About 2 MHz #define SPI_SPEED 2 // About 2 MHz
#include <algorithm>
#include <LPC17xx.h>
#include <gpio.h>
#include <Arduino.h>
uint8_t swSpiTransfer_mode_0(uint8_t b, const uint8_t spi_speed, const pin_t sck_pin, const pin_t miso_pin, const pin_t mosi_pin ) {
for (uint8_t i = 0; i < 8; i++) {
if (spi_speed == 0) {
gpio_set(mosi_pin, !!(b & 0x80));
gpio_set(sck_pin, HIGH);
b <<= 1;
if (miso_pin >= 0 && gpio_get(miso_pin)) b |= 1;
gpio_set(sck_pin, LOW);
}
else {
const uint8_t state = (b & 0x80) ? HIGH : LOW;
for (uint8_t j = 0; j < spi_speed; j++)
gpio_set(mosi_pin, state);
for (uint8_t j = 0; j < spi_speed + (miso_pin >= 0 ? 0 : 1); j++)
gpio_set(sck_pin, HIGH);
b <<= 1;
if (miso_pin >= 0 && gpio_get(miso_pin)) b |= 1;
for (uint8_t j = 0; j < spi_speed; j++)
gpio_set(sck_pin, LOW);
}
}
return b;
}
uint8_t swSpiTransfer_mode_3(uint8_t b, const uint8_t spi_speed, const pin_t sck_pin, const pin_t miso_pin, const pin_t mosi_pin ) {
for (uint8_t i = 0; i < 8; i++) {
const uint8_t state = (b & 0x80) ? HIGH : LOW;
if (spi_speed == 0) {
gpio_set(sck_pin, LOW);
gpio_set(mosi_pin, state);
gpio_set(mosi_pin, state); // need some setup time
gpio_set(sck_pin, HIGH);
}
else {
for (uint8_t j = 0; j < spi_speed + (miso_pin >= 0 ? 0 : 1); j++)
gpio_set(sck_pin, LOW);
for (uint8_t j = 0; j < spi_speed; j++)
gpio_set(mosi_pin, state);
for (uint8_t j = 0; j < spi_speed; j++)
gpio_set(sck_pin, HIGH);
}
b <<= 1;
if (miso_pin >= 0 && gpio_get(miso_pin)) b |= 1;
}
return b;
}
static uint8_t SPI_speed = 0; static uint8_t SPI_speed = 0;
static void u8g_sw_spi_HAL_LPC1768_shift_out(uint8_t dataPin, uint8_t clockPin, uint8_t val) { static void u8g_sw_spi_HAL_LPC1768_shift_out(uint8_t dataPin, uint8_t clockPin, uint8_t val) {
swSpiTransfer(val, SPI_speed, clockPin, -1, dataPin); #if ENABLED(FYSETC_MINI_12864)
swSpiTransfer_mode_3(val, SPI_speed, clockPin, -1, dataPin);
#else
swSpiTransfer_mode_0(val, SPI_speed, clockPin, -1, dataPin);
#endif
} }
uint8_t u8g_com_HAL_LPC1768_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) { uint8_t u8g_com_HAL_LPC1768_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {

1
Marlin/src/core/boards.h
View File

@ -194,6 +194,7 @@
#define BOARD_BIQU_B300_V1_0 1760 // BIQU B300_V1.0 (Power outputs: Hotend0, Fan, Bed, SPI Driver) #define BOARD_BIQU_B300_V1_0 1760 // BIQU B300_V1.0 (Power outputs: Hotend0, Fan, Bed, SPI Driver)
#define BOARD_BIGTREE_SKR_V1_3 1761 // BIGTREE SKR_V1.3 (Power outputs: Hotend0, Hotend1, Fan, Bed) #define BOARD_BIGTREE_SKR_V1_3 1761 // BIGTREE SKR_V1.3 (Power outputs: Hotend0, Hotend1, Fan, Bed)
#define BOARD_AZTEEG_X5_MINI 1762 // Azteeg X5 Mini (Power outputs: Hotend0, Bed, Fan) #define BOARD_AZTEEG_X5_MINI 1762 // Azteeg X5 Mini (Power outputs: Hotend0, Bed, Fan)
#define BOARD_MKS_SGEN 1763 // MKS-SGen (Power outputs: Hotend0, Hotend1, Bed, Fan)
// //
// SAM3X8E ARM Cortex M3 // SAM3X8E ARM Cortex M3

1
Marlin/src/core/debug_out.h
View File

@ -19,7 +19,6 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
// //
// Serial aliases for debugging. // Serial aliases for debugging.

14
Marlin/src/core/utility.cpp
View File

@ -264,15 +264,15 @@ void safe_delay(millis_t ms) {
return conv; return conv;
} }
// Convert unsigned float to string with 1234.56 format omitting trailing zeros // Convert unsigned float to string with 1234.5 format omitting trailing zeros
char* ftostr62rj(const float &f) { char* ftostr51rj(const float &f) {
const long i = ((f < 0 ? -f : f) * 1000 + 5) / 10; const long i = ((f < 0 ? -f : f) * 100 + 5) / 10;
conv[0] = RJDIGIT(i, 100000); conv[0] = ' ';
conv[1] = RJDIGIT(i, 10000); conv[1] = RJDIGIT(i, 10000);
conv[2] = RJDIGIT(i, 1000); conv[2] = RJDIGIT(i, 1000);
conv[3] = DIGIMOD(i, 100); conv[3] = RJDIGIT(i, 100);
conv[4] = '.'; conv[4] = DIGIMOD(i, 10);
conv[5] = DIGIMOD(i, 10); conv[5] = '.';
conv[6] = DIGIMOD(i, 1); conv[6] = DIGIMOD(i, 1);
return conv; return conv;
} }

4
Marlin/src/core/utility.h
View File

@ -106,8 +106,8 @@ inline void serial_delay(const millis_t ms) {
// Convert signed float to string with +123.45 format // Convert signed float to string with +123.45 format
char* ftostr52sign(const float &x); char* ftostr52sign(const float &x);
// Convert unsigned float to string with 1234.56 format omitting trailing zeros // Convert unsigned float to string with 1234.5 format omitting trailing zeros
char* ftostr62rj(const float &x); char* ftostr51rj(const float &x);
// Convert float to rj string with 123 or -12 format // Convert float to rj string with 123 or -12 format
FORCE_INLINE char* ftostr3(const float &x) { return i16tostr3(int16_t(x + (x < 0 ? -0.5f : 0.5f))); } FORCE_INLINE char* ftostr3(const float &x) { return i16tostr3(int16_t(x + (x < 0 ? -0.5f : 0.5f))); }

91
Marlin/src/feature/power_loss_recovery.cpp
View File

@ -151,6 +151,12 @@ void PrintJobRecovery::save(const bool force/*=false*/, const bool save_queue/*=
// Machine state // Machine state
COPY(info.current_position, current_position); COPY(info.current_position, current_position);
#if HAS_HOME_OFFSET
COPY(info.home_offset, home_offset);
#endif
#if HAS_POSITION_SHIFT
COPY(info.position_shift, position_shift);
#endif
info.feedrate = uint16_t(feedrate_mm_s * 60.0f); info.feedrate = uint16_t(feedrate_mm_s * 60.0f);
#if HOTENDS > 1 #if HOTENDS > 1
@ -187,7 +193,7 @@ void PrintJobRecovery::save(const bool force/*=false*/, const bool save_queue/*=
info.retract_hop = fwretract.current_hop; info.retract_hop = fwretract.current_hop;
#endif #endif
//relative mode // Relative mode
info.relative_mode = relative_mode; info.relative_mode = relative_mode;
info.relative_modes_e = gcode.axis_relative_modes[E_AXIS]; info.relative_modes_e = gcode.axis_relative_modes[E_AXIS];
@ -239,20 +245,30 @@ void PrintJobRecovery::resume() {
gcode.process_subcommands_now_P(PSTR("M420 S0 Z0")); gcode.process_subcommands_now_P(PSTR("M420 S0 Z0"));
#endif #endif
// Set Z to 0, raise Z by 2mm, and Home (XY only for Cartesian) with no raise // Reset E, raise Z, home XY...
// (Only do simulated homing in Marlin Dev Mode.) gcode.process_subcommands_now_P(PSTR("G92.9 E0"
gcode.process_subcommands_now_P(PSTR("G92.0 Z0\nG1 Z" STRINGIFY(RECOVERY_ZRAISE) "\nG28 R0" #if Z_HOME_DIR > 0
// If Z homing goes to max, reset E and home all
"\nG28R0"
#if ENABLED(MARLIN_DEV_MODE)
"S"
#endif
#else
// Set Z to 0, raise Z by RECOVERY_ZRAISE, and Home (XY only for Cartesian)
// with no raise. (Only do simulated homing in Marlin Dev Mode.)
"Z0\nG1Z" STRINGIFY(RECOVERY_ZRAISE) "\nG28R0"
#if ENABLED(MARLIN_DEV_MODE) #if ENABLED(MARLIN_DEV_MODE)
"S" "S"
#elif !IS_KINEMATIC #elif !IS_KINEMATIC
"XY" "XY"
#endif #endif
#endif
)); ));
// Pretend that all axes are homed // Pretend that all axes are homed
axis_homed = axis_known_position = xyz_bits; axis_homed = axis_known_position = xyz_bits;
char cmd[40], str_1[16], str_2[16]; char cmd[50], str_1[16], str_2[16];
// Select the previously active tool (with no_move) // Select the previously active tool (with no_move)
#if EXTRUDERS > 1 #if EXTRUDERS > 1
@ -315,16 +331,16 @@ void PrintJobRecovery::resume() {
memcpy(&mixer.gradient, &info.gradient, sizeof(info.gradient)); memcpy(&mixer.gradient, &info.gradient, sizeof(info.gradient));
#endif #endif
// Restore Z (plus raise) and E positions with G92.0 // Extrude and retract to clean the nozzle
dtostrf(info.current_position[Z_AXIS] + RECOVERY_ZRAISE, 1, 3, str_1); #if POWER_LOSS_PURGE_LEN
dtostrf(info.current_position[E_AXIS] //sprintf_P(cmd, PSTR("G1 E%d F200"), POWER_LOSS_PURGE_LEN);
#if ENABLED(SAVE_EACH_CMD_MODE) //gcode.process_subcommands_now(cmd);
- 5 // Extra extrusion on restart gcode.process_subcommands_now_P(PSTR("G1 E" STRINGIFY(POWER_LOSS_PURGE_LEN) " F200"));
#endif #endif
, 1, 3, str_2 #if POWER_LOSS_RETRACT_LEN
); sprintf_P(cmd, PSTR("G1 E%d F3000"), POWER_LOSS_PURGE_LEN - POWER_LOSS_RETRACT_LEN);
sprintf_P(cmd, PSTR("G92.0 Z%s E%s"), str_1, str_2);
gcode.process_subcommands_now(cmd); gcode.process_subcommands_now(cmd);
#endif
// Move back to the saved XY // Move back to the saved XY
dtostrf(info.current_position[X_AXIS], 1, 3, str_1); dtostrf(info.current_position[X_AXIS], 1, 3, str_1);
@ -337,13 +353,37 @@ void PrintJobRecovery::resume() {
sprintf_P(cmd, PSTR("G1 Z%s F200"), str_1); sprintf_P(cmd, PSTR("G1 Z%s F200"), str_1);
gcode.process_subcommands_now(cmd); gcode.process_subcommands_now(cmd);
// Un-retract
#if POWER_LOSS_PURGE_LEN
//sprintf_P(cmd, PSTR("G1 E%d F3000"), POWER_LOSS_PURGE_LEN);
//gcode.process_subcommands_now(cmd);
gcode.process_subcommands_now_P(PSTR("G1 E" STRINGIFY(POWER_LOSS_PURGE_LEN) " F3000"));
#endif
// Restore the feedrate // Restore the feedrate
sprintf_P(cmd, PSTR("G1 F%d"), info.feedrate); sprintf_P(cmd, PSTR("G1 F%d"), info.feedrate);
gcode.process_subcommands_now(cmd); gcode.process_subcommands_now(cmd);
//relative mode // Restore E position with G92.9
if (info.relative_mode) relative_mode = true; dtostrf(info.current_position[E_AXIS], 1, 3, str_1);
if (info.relative_modes_e) gcode.axis_relative_modes[E_AXIS] = true; sprintf_P(cmd, PSTR("G92.9 E%s"), str_1);
gcode.process_subcommands_now(cmd);
// Relative mode
relative_mode = info.relative_mode;
gcode.axis_relative_modes[E_AXIS] = info.relative_modes_e;
#if HAS_HOME_OFFSET || HAS_POSITION_SHIFT
LOOP_XYZ(i) {
#if HAS_HOME_OFFSET
home_offset[i] = info.home_offset[i];
#endif
#if HAS_POSITION_SHIFT
position_shift[i] = info.position_shift[i];
#endif
update_workspace_offset((AxisEnum)i);
}
#endif
// Process commands from the old pending queue // Process commands from the old pending queue
uint8_t c = info.commands_in_queue, r = info.cmd_queue_index_r; uint8_t c = info.commands_in_queue, r = info.cmd_queue_index_r;
@ -372,6 +412,25 @@ void PrintJobRecovery::resume() {
DEBUG_ECHO(info.current_position[i]); DEBUG_ECHO(info.current_position[i]);
} }
DEBUG_EOL(); DEBUG_EOL();
#if HAS_HOME_OFFSET
DEBUG_ECHOPGM("home_offset: ");
LOOP_XYZ(i) {
if (i) DEBUG_CHAR(',');
DEBUG_ECHO(info.home_offset[i]);
}
DEBUG_EOL();
#endif
#if HAS_POSITION_SHIFT
DEBUG_ECHOPGM("position_shift: ");
LOOP_XYZ(i) {
if (i) DEBUG_CHAR(',');
DEBUG_ECHO(info.position_shift[i]);
}
DEBUG_EOL();
#endif
DEBUG_ECHOLNPAIR("feedrate: ", info.feedrate); DEBUG_ECHOLNPAIR("feedrate: ", info.feedrate);
#if HOTENDS > 1 #if HOTENDS > 1

9
Marlin/src/feature/power_loss_recovery.h
View File

@ -35,6 +35,8 @@
#define SAVE_INFO_INTERVAL_MS 0 #define SAVE_INFO_INTERVAL_MS 0
//#define SAVE_EACH_CMD_MODE //#define SAVE_EACH_CMD_MODE
//#define DEBUG_POWER_LOSS_RECOVERY //#define DEBUG_POWER_LOSS_RECOVERY
#define POWER_LOSS_PURGE_LEN 20
#define POWER_LOSS_RETRACT_LEN 10
typedef struct { typedef struct {
uint8_t valid_head; uint8_t valid_head;
@ -42,6 +44,13 @@ typedef struct {
// Machine state // Machine state
float current_position[NUM_AXIS]; float current_position[NUM_AXIS];
#if HAS_HOME_OFFSET
float home_offset[XYZ];
#endif
#if HAS_POSITION_SHIFT
float position_shift[XYZ];
#endif
uint16_t feedrate; uint16_t feedrate;
#if HOTENDS > 1 #if HOTENDS > 1

2
Marlin/src/gcode/control/M3-M5.cpp
View File

@ -74,7 +74,9 @@ inline void delay_for_power_down() { safe_delay(SPINDLE_LASER_POWERDOWN_DELAY);
inline void set_spindle_laser_ocr(const uint8_t ocr) { inline void set_spindle_laser_ocr(const uint8_t ocr) {
WRITE(SPINDLE_LASER_ENA_PIN, SPINDLE_LASER_ENABLE_INVERT); // turn spindle on (active low) WRITE(SPINDLE_LASER_ENA_PIN, SPINDLE_LASER_ENABLE_INVERT); // turn spindle on (active low)
#if ENABLED(SPINDLE_LASER_PWM)
analogWrite(SPINDLE_LASER_PWM_PIN, (SPINDLE_LASER_PWM_INVERT) ? 255 - ocr : ocr); analogWrite(SPINDLE_LASER_PWM_PIN, (SPINDLE_LASER_PWM_INVERT) ? 255 - ocr : ocr);
#endif
} }
#if ENABLED(SPINDLE_LASER_PWM) #if ENABLED(SPINDLE_LASER_PWM)

50
Marlin/src/gcode/geometry/G92.cpp
View File

@ -33,9 +33,23 @@
*/ */
void GcodeSuite::G92() { void GcodeSuite::G92() {
bool didE = false;
#if IS_SCARA || !HAS_POSITION_SHIFT
bool didXYZ = false;
#else
constexpr bool didXYZ = false;
#endif
#if USE_GCODE_SUBCODES
const uint8_t subcode_G92 = parser.subcode;
#else
constexpr uint8_t subcode_G92 = 0;
#endif
switch (subcode_G92) {
default: break;
#if ENABLED(CNC_COORDINATE_SYSTEMS) #if ENABLED(CNC_COORDINATE_SYSTEMS)
switch (parser.subcode) { case 1: {
case 1:
// Zero the G92 values and restore current position // Zero the G92 values and restore current position
#if !IS_SCARA #if !IS_SCARA
LOOP_XYZ(i) { LOOP_XYZ(i) {
@ -46,24 +60,24 @@ void GcodeSuite::G92() {
} }
} }
#endif // Not SCARA #endif // Not SCARA
return; } return;
}
#endif #endif
#if ENABLED(POWER_LOSS_RECOVERY)
#if ENABLED(CNC_COORDINATE_SYSTEMS) case 9: {
#define IS_G92_0 (parser.subcode == 0) LOOP_XYZE(i) {
#else if (parser.seenval(axis_codes[i])) {
#define IS_G92_0 true current_position[i] = parser.value_axis_units((AxisEnum)i);
#endif
bool didE = false;
#if IS_SCARA || !HAS_POSITION_SHIFT #if IS_SCARA || !HAS_POSITION_SHIFT
bool didXYZ = false; if (i == E_AXIS) didE = true; else didXYZ = true;
#else #elif HAS_POSITION_SHIFT
constexpr bool didXYZ = false; if (i == E_AXIS) didE = true;
#endif #endif
}
if (IS_G92_0) LOOP_XYZE(i) { }
} break;
#endif
case 0: {
LOOP_XYZE(i) {
if (parser.seenval(axis_codes[i])) { if (parser.seenval(axis_codes[i])) {
const float l = parser.value_axis_units((AxisEnum)i), const float l = parser.value_axis_units((AxisEnum)i),
v = i == E_AXIS ? l : LOGICAL_TO_NATIVE(l, i), v = i == E_AXIS ? l : LOGICAL_TO_NATIVE(l, i),
@ -85,6 +99,8 @@ void GcodeSuite::G92() {
} }
} }
} }
} break;
}
#if ENABLED(CNC_COORDINATE_SYSTEMS) #if ENABLED(CNC_COORDINATE_SYSTEMS)
// Apply workspace offset to the active coordinate system // Apply workspace offset to the active coordinate system

5
Marlin/src/gcode/queue.cpp
View File

@ -526,8 +526,9 @@ void gcode_line_error(PGM_P const err, const int8_t port) {
#endif // BINARY_FILE_TRANSFER #endif // BINARY_FILE_TRANSFER
FORCE_INLINE bool is_M29(const char * const cmd) { FORCE_INLINE bool is_M29(const char * const cmd) { // matches "M29" & "M29 ", but not "M290", etc
return cmd[0] == 'M' && cmd[1] == '2' && cmd[2] == '9' && !WITHIN(cmd[3], '0', '9'); const char * const m29 = strstr_P(cmd, PSTR("M29"));
return m29 && !NUMERIC(m29[3]);
} }
/** /**

3
Marlin/src/gcode/sdcard/M23.cpp
View File

@ -31,9 +31,6 @@
* M23: Open a file * M23: Open a file
*/ */
void GcodeSuite::M23() { void GcodeSuite::M23() {
#if ENABLED(POWER_LOSS_RECOVERY)
card.removeJobRecoveryFile();
#endif
// Simplify3D includes the size, so zero out all spaces (#7227) // Simplify3D includes the size, so zero out all spaces (#7227)
for (char *fn = parser.string_arg; *fn; ++fn) if (*fn == ' ') *fn = '\0'; for (char *fn = parser.string_arg; *fn; ++fn) if (*fn == ' ') *fn = '\0';
card.openFile(parser.string_arg, true); card.openFile(parser.string_arg, true);

2
Marlin/src/inc/Conditionals_LCD.h
View File

@ -143,6 +143,8 @@
#define DOGLCD #define DOGLCD
#define ULTIPANEL #define ULTIPANEL
#define LCD_CONTRAST_MIN 0
#define LCD_CONTRAST_MAX 255
#define DEFAULT_LCD_CONTRAST 255 #define DEFAULT_LCD_CONTRAST 255
#define LED_COLORS_REDUCE_GREEN #define LED_COLORS_REDUCE_GREEN

6
Marlin/src/lcd/dogm/ultralcd_DOGM.h
View File

@ -112,7 +112,11 @@
//#define U8G_CLASS U8GLIB_MINI12864 //#define U8G_CLASS U8GLIB_MINI12864
//#define U8G_PARAM DOGLCD_CS, DOGLCD_A0 // 8 stripes //#define U8G_PARAM DOGLCD_CS, DOGLCD_A0 // 8 stripes
#define U8G_CLASS U8GLIB_MINI12864_2X #define U8G_CLASS U8GLIB_MINI12864_2X
#define U8G_PARAM DOGLCD_CS, DOGLCD_A0 // 4 stripes #if EITHER(FYSETC_MINI_12864, TARGET_LPC1768)
#define U8G_PARAM DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0 // 4 stripes SW-SPI
#else
#define U8G_PARAM DOGLCD_CS, DOGLCD_A0 // 4 stripes HW-SPI
#endif
#elif ENABLED(U8GLIB_SH1106_EINSTART) #elif ENABLED(U8GLIB_SH1106_EINSTART)
// Connected via motherboard header // Connected via motherboard header
#define U8G_CLASS U8GLIB_SH1106_128X64 #define U8G_CLASS U8GLIB_SH1106_128X64

152
Marlin/src/lcd/language/language_cz.h
View File

@ -35,15 +35,20 @@
*/ */
#define DISPLAY_CHARSET_ISO10646_CZ #define DISPLAY_CHARSET_ISO10646_CZ
#define THIS_LANGUAGES_SPECIAL_SYMBOLS _UxGT("áÁčČďĎéÉěĚíÍňŇóÓřŘšŠťŤúÚůŮýÝžŽ³")
#define CHARSIZE 2 #define CHARSIZE 2
#define WELCOME_MSG MACHINE_NAME _UxGT(" připraven.") #define WELCOME_MSG MACHINE_NAME _UxGT(" připraven.")
#define MSG_YES _UxGT("ANO")
#define MSG_NO _UxGT("NE")
#define MSG_BACK _UxGT("Zpět") #define MSG_BACK _UxGT("Zpět")
#define MSG_SD_INSERTED _UxGT("Karta vložena") #define MSG_SD_INSERTED _UxGT("Karta vložena")
#define MSG_SD_REMOVED _UxGT("Karta vyjmuta") #define MSG_SD_REMOVED _UxGT("Karta vyjmuta")
#define MSG_LCD_ENDSTOPS _UxGT("Endstopy") // max 8 znaku #define MSG_LCD_ENDSTOPS _UxGT("Endstopy") // max 8 znaku
#define MSG_LCD_SOFT_ENDSTOPS _UxGT("Soft Endstopy") #define MSG_LCD_SOFT_ENDSTOPS _UxGT("Soft Endstopy")
#define MSG_MAIN _UxGT("Hlavní nabídka") #define MSG_MAIN _UxGT("Hlavní nabídka")
#define MSG_ADVANCED_SETTINGS _UxGT("Další nastavení")
#define MSG_CONFIGURATION _UxGT("Konfigurace")
#define MSG_AUTOSTART _UxGT("Autostart") #define MSG_AUTOSTART _UxGT("Autostart")
#define MSG_DISABLE_STEPPERS _UxGT("Uvolnit motory") #define MSG_DISABLE_STEPPERS _UxGT("Uvolnit motory")
#define MSG_DEBUG_MENU _UxGT("Nabídka ladění") #define MSG_DEBUG_MENU _UxGT("Nabídka ladění")
@ -56,6 +61,7 @@
#define MSG_AUTO_HOME_X _UxGT("Domů osa X") #define MSG_AUTO_HOME_X _UxGT("Domů osa X")
#define MSG_AUTO_HOME_Y _UxGT("Domů osa Y") #define MSG_AUTO_HOME_Y _UxGT("Domů osa Y")
#define MSG_AUTO_HOME_Z _UxGT("Domů osa Z") #define MSG_AUTO_HOME_Z _UxGT("Domů osa Z")
#define MSG_AUTO_Z_ALIGN _UxGT("Auto srovnání Z")
#define MSG_LEVEL_BED_HOMING _UxGT("Měření podložky") #define MSG_LEVEL_BED_HOMING _UxGT("Měření podložky")
#define MSG_LEVEL_BED_WAITING _UxGT("Kliknutím spusťte") #define MSG_LEVEL_BED_WAITING _UxGT("Kliknutím spusťte")
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Další bod") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Další bod")
@ -76,7 +82,13 @@
#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" hotend") #define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" hotend")
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" podlož") #define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" podlož")
#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT(" nast") #define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT(" nast")
#define MSG_PREHEAT_CUSTOM _UxGT("Zahřát vlastní")
#define MSG_COOLDOWN _UxGT("Zchladit") #define MSG_COOLDOWN _UxGT("Zchladit")
#define MSG_LASER_MENU _UxGT("Ovládání laseru")
#define MSG_LASER_OFF _UxGT("Vypnout laser")
#define MSG_LASER_ON _UxGT("Zapnout laser")
#define MSG_LASER_POWER _UxGT("Výkon laseru")
#define MSG_SPINDLE_REVERSE _UxGT("Vřeteno opačně")
#define MSG_SWITCH_PS_ON _UxGT("Zapnout napájení") #define MSG_SWITCH_PS_ON _UxGT("Zapnout napájení")
#define MSG_SWITCH_PS_OFF _UxGT("Vypnout napájení") #define MSG_SWITCH_PS_OFF _UxGT("Vypnout napájení")
#define MSG_EXTRUDE _UxGT("Vytlačit (extr.)") #define MSG_EXTRUDE _UxGT("Vytlačit (extr.)")
@ -88,10 +100,23 @@
#define MSG_NEXT_CORNER _UxGT("Další roh") #define MSG_NEXT_CORNER _UxGT("Další roh")
#define MSG_EDITING_STOPPED _UxGT("Konec úprav sítě") #define MSG_EDITING_STOPPED _UxGT("Konec úprav sítě")
#define MSG_MESH_X _UxGT("Index X")
#define MSG_MESH_Y _UxGT("Index Y")
#define MSG_MESH_EDIT_Z _UxGT("Hodnota Z")
#define MSG_USER_MENU _UxGT("Vlastní příkazy")
#define MSG_UBL_DOING_G29 _UxGT("Provádím G29") #define MSG_UBL_DOING_G29 _UxGT("Provádím G29")
#define MSG_UBL_UNHOMED _UxGT("Přejeďte domů") #define MSG_UBL_UNHOMED _UxGT("Přejeďte domů")
#define MSG_UBL_TOOLS _UxGT("UBL nástroje") #define MSG_UBL_TOOLS _UxGT("UBL nástroje")
#define MSG_UBL_LEVEL_BED _UxGT("Unified Bed Leveling") #define MSG_UBL_LEVEL_BED _UxGT("Unified Bed Leveling")
#define MSG_IDEX_MENU _UxGT("Režim IDEX")
#define MSG_OFFSETS_MENU _UxGT("Ofsety nástrojů")
#define MSG_IDEX_MODE_AUTOPARK _UxGT("Auto-Park")
#define MSG_IDEX_MODE_DUPLICATE _UxGT("Duplikace")
#define MSG_IDEX_MODE_MIRRORED_COPY _UxGT("Zrcadlení")
#define MSG_IDEX_MODE_FULL_CTRL _UxGT("Plná kontrola")
#define MSG_X_OFFSET _UxGT("2. tryska X")
#define MSG_Y_OFFSET _UxGT("2. tryska Y")
#define MSG_Z_OFFSET _UxGT("2. tryska Z")
#define MSG_UBL_MANUAL_MESH _UxGT("Manuální síť bodů") #define MSG_UBL_MANUAL_MESH _UxGT("Manuální síť bodů")
#define MSG_UBL_BC_INSERT _UxGT("Vložte kartu, změřte") #define MSG_UBL_BC_INSERT _UxGT("Vložte kartu, změřte")
#define MSG_UBL_BC_INSERT2 _UxGT("Změřte") #define MSG_UBL_BC_INSERT2 _UxGT("Změřte")
@ -169,7 +194,6 @@
#define MSG_INTENSITY_B _UxGT("Modrá intenzita") #define MSG_INTENSITY_B _UxGT("Modrá intenzita")
#define MSG_INTENSITY_W _UxGT("Bílá intenzita") #define MSG_INTENSITY_W _UxGT("Bílá intenzita")
#define MSG_LED_BRIGHTNESS _UxGT("Jas") #define MSG_LED_BRIGHTNESS _UxGT("Jas")
#define MSG_USER_MENU _UxGT("Vlastní příkazy")
#define MSG_MOVING _UxGT("Posouvání...") #define MSG_MOVING _UxGT("Posouvání...")
#define MSG_FREE_XY _UxGT("Uvolnit XY") #define MSG_FREE_XY _UxGT("Uvolnit XY")
@ -177,6 +201,7 @@
#define MSG_MOVE_Y _UxGT("Posunout Y") #define MSG_MOVE_Y _UxGT("Posunout Y")
#define MSG_MOVE_Z _UxGT("Posunout Z") #define MSG_MOVE_Z _UxGT("Posunout Z")
#define MSG_MOVE_E _UxGT("Extrudér") #define MSG_MOVE_E _UxGT("Extrudér")
#define MSG_HOTEND_TOO_COLD _UxGT("Hotend je studený")
#define MSG_MOVE_01MM _UxGT("Posunout o 0,1mm") #define MSG_MOVE_01MM _UxGT("Posunout o 0,1mm")
#define MSG_MOVE_1MM _UxGT("Posunout o 1mm") #define MSG_MOVE_1MM _UxGT("Posunout o 1mm")
#define MSG_MOVE_10MM _UxGT("Posunout o 10mm") #define MSG_MOVE_10MM _UxGT("Posunout o 10mm")
@ -184,6 +209,7 @@
#define MSG_BED_Z _UxGT("Výška podl.") #define MSG_BED_Z _UxGT("Výška podl.")
#define MSG_NOZZLE _UxGT("Tryska") #define MSG_NOZZLE _UxGT("Tryska")
#define MSG_BED _UxGT("Podložka") #define MSG_BED _UxGT("Podložka")
#define MSG_CHAMBER _UxGT("Komora")
#define MSG_FAN_SPEED _UxGT("Rychlost vent.") #define MSG_FAN_SPEED _UxGT("Rychlost vent.")
#define MSG_EXTRA_FAN_SPEED _UxGT("Rychlost ex. vent.") #define MSG_EXTRA_FAN_SPEED _UxGT("Rychlost ex. vent.")
#define MSG_FLOW _UxGT("Průtok") #define MSG_FLOW _UxGT("Průtok")
@ -250,10 +276,15 @@
#define MSG_LOAD_EEPROM _UxGT("Načíst nastavení") #define MSG_LOAD_EEPROM _UxGT("Načíst nastavení")
#define MSG_RESTORE_FAILSAFE _UxGT("Obnovit výchozí") #define MSG_RESTORE_FAILSAFE _UxGT("Obnovit výchozí")
#define MSG_INIT_EEPROM _UxGT("Inic. EEPROM") #define MSG_INIT_EEPROM _UxGT("Inic. EEPROM")
#define MSG_SD_UPDATE _UxGT("Aktualizace z SD")
#define MSG_RESET_PRINTER _UxGT("Reset tiskárny")
#define MSG_REFRESH _UxGT("Obnovit") #define MSG_REFRESH _UxGT("Obnovit")
#define MSG_WATCH _UxGT("Info obrazovka") #define MSG_WATCH _UxGT("Info obrazovka")
#define MSG_PREPARE _UxGT("Připrava tisku") #define MSG_PREPARE _UxGT("Připrava tisku")
#define MSG_TUNE _UxGT("Doladění tisku") #define MSG_TUNE _UxGT("Doladění tisku")
#define MSG_START_PRINT _UxGT("Spustit tisk")
#define MSG_BUTTON_PRINT _UxGT("Tisk")
#define MSG_BUTTON_CANCEL _UxGT("Zrušit")
#define MSG_PAUSE_PRINT _UxGT("Pozastavit tisk") #define MSG_PAUSE_PRINT _UxGT("Pozastavit tisk")
#define MSG_RESUME_PRINT _UxGT("Obnovit tisk") #define MSG_RESUME_PRINT _UxGT("Obnovit tisk")
#define MSG_STOP_PRINT _UxGT("Zastavit tisk") #define MSG_STOP_PRINT _UxGT("Zastavit tisk")
@ -277,6 +308,12 @@
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V") #define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V")
#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("S UnRet V") #define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("S UnRet V")
#define MSG_AUTORETRACT _UxGT("AutoRetr.") #define MSG_AUTORETRACT _UxGT("AutoRetr.")
#define MSG_FILAMENT_SWAP_LENGTH _UxGT("Délka retrakce")
#define MSG_TOOL_CHANGE _UxGT("Výměna nástroje")
#define MSG_TOOL_CHANGE_ZLIFT _UxGT("Zdvih Z")
#define MSG_SINGLENOZZLE_PRIME_SPD _UxGT("Rychlost primár.")
#define MSG_SINGLENOZZLE_RETRACT_SPD _UxGT("Rychlost retrak.")
#define MSG_NOZZLE_STANDBY _UxGT("Tryska standby")
#define MSG_FILAMENTCHANGE _UxGT("Vyměnit filament") #define MSG_FILAMENTCHANGE _UxGT("Vyměnit filament")
#define MSG_FILAMENTLOAD _UxGT("Zavést filament") #define MSG_FILAMENTLOAD _UxGT("Zavést filament")
#define MSG_FILAMENTUNLOAD _UxGT("Vysunout filament") #define MSG_FILAMENTUNLOAD _UxGT("Vysunout filament")
@ -287,16 +324,22 @@
#define MSG_ZPROBE_OUT _UxGT("Sonda Z mimo podl") #define MSG_ZPROBE_OUT _UxGT("Sonda Z mimo podl")
#define MSG_SKEW_FACTOR _UxGT("Faktor zkosení") #define MSG_SKEW_FACTOR _UxGT("Faktor zkosení")
#define MSG_BLTOUCH _UxGT("BLTouch") #define MSG_BLTOUCH _UxGT("BLTouch")
#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test") #define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch self-test")
#define MSG_BLTOUCH_RESET _UxGT("BLTouch Reset") #define MSG_BLTOUCH_RESET _UxGT("BLTouch reset")
#define MSG_BLTOUCH_DEPLOY _UxGT("BLTouch Vysunout") #define MSG_BLTOUCH_DEPLOY _UxGT("BLTouch vysunout")
#define MSG_BLTOUCH_STOW _UxGT("BLTouch Zasunout") #define MSG_BLTOUCH_SW_MODE _UxGT("SW výsun BLTouch")
#define MSG_BLTOUCH_5V_MODE _UxGT("BLTouch 5V režim")
#define MSG_BLTOUCH_OD_MODE _UxGT("BLTouch OD režim")
#define MSG_BLTOUCH_STOW _UxGT("BLTouch zasunout")
#define MSG_MANUAL_DEPLOY _UxGT("Vysunout Z-sondu")
#define MSG_MANUAL_STOW _UxGT("Zasunout Z-sondu")
#define MSG_HOME _UxGT("Domů") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST #define MSG_HOME _UxGT("Domů") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("první") #define MSG_FIRST _UxGT("první")
#define MSG_ZPROBE_ZOFFSET _UxGT("Z ofset") #define MSG_ZPROBE_ZOFFSET _UxGT("Z ofset")
#define MSG_BABYSTEP_X _UxGT("Babystep X") #define MSG_BABYSTEP_X _UxGT("Babystep X")
#define MSG_BABYSTEP_Y _UxGT("Babystep Y") #define MSG_BABYSTEP_Y _UxGT("Babystep Y")
#define MSG_BABYSTEP_Z _UxGT("Babystep Z") #define MSG_BABYSTEP_Z _UxGT("Babystep Z")
#define MSG_BABYSTEP_TOTAL _UxGT("Celkem")
#define MSG_ENDSTOP_ABORT _UxGT("Endstop abort") #define MSG_ENDSTOP_ABORT _UxGT("Endstop abort")
#define MSG_HEATING_FAILED_LCD _UxGT("Chyba zahřívání") #define MSG_HEATING_FAILED_LCD _UxGT("Chyba zahřívání")
#define MSG_HEATING_FAILED_LCD_BED _UxGT("Chyba zahř.podl.") #define MSG_HEATING_FAILED_LCD_BED _UxGT("Chyba zahř.podl.")
@ -307,6 +350,8 @@
#define MSG_ERR_MINTEMP _UxGT("NÍZKA TEPLOTA") #define MSG_ERR_MINTEMP _UxGT("NÍZKA TEPLOTA")
#define MSG_ERR_MAXTEMP_BED _UxGT("VYS. TEPL. PODL.") #define MSG_ERR_MAXTEMP_BED _UxGT("VYS. TEPL. PODL.")
#define MSG_ERR_MINTEMP_BED _UxGT("NÍZ. TEPL. PODL.") #define MSG_ERR_MINTEMP_BED _UxGT("NÍZ. TEPL. PODL.")
#define MSG_ERR_MAXTEMP_CHAMBER _UxGT("Err: MAXTEMP KOMORA")
#define MSG_ERR_MINTEMP_CHAMBER _UxGT("Err: MINTEMP KOMORA")
#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST #define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST
#define MSG_HALTED _UxGT("TISK. ZASTAVENA") #define MSG_HALTED _UxGT("TISK. ZASTAVENA")
#define MSG_PLEASE_RESET _UxGT("Proveďte reset") #define MSG_PLEASE_RESET _UxGT("Proveďte reset")
@ -380,18 +425,82 @@
#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Vytlačit víc") #define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Vytlačit víc")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Obnovit tisk") #define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Obnovit tisk")
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Tryska: ") #define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Tryska: ")
#define MSG_RUNOUT_SENSOR _UxGT("Senzor filamentu")
#define MSG_ERR_HOMING_FAILED _UxGT("Parkování selhalo") #define MSG_ERR_HOMING_FAILED _UxGT("Parkování selhalo")
#define MSG_ERR_PROBING_FAILED _UxGT("Kalibrace selhala") #define MSG_ERR_PROBING_FAILED _UxGT("Kalibrace selhala")
#define MSG_M600_TOO_COLD _UxGT("M600: Moc studený") #define MSG_M600_TOO_COLD _UxGT("M600: Moc studený")
#define MSG_MMU2_FILAMENT_CHANGE_HEADER _UxGT("VÝMĚNA FILAMENTU")
#define MSG_MMU2_CHOOSE_FILAMENT_HEADER _UxGT("VYBERTE FILAMENT")
#define MSG_MMU2_MENU _UxGT("MMU")
#define MSG_MMU2_WRONG_FIRMWARE _UxGT("Aktual. MMU firmware!")
#define MSG_MMU2_NOT_RESPONDING _UxGT("MMU potř. pozornost.")
#define MSG_MMU2_RESUME _UxGT("Obnovit tisk")
#define MSG_MMU2_RESUMING _UxGT("Obnovování...")
#define MSG_MMU2_LOAD_FILAMENT _UxGT("Zavést filament")
#define MSG_MMU2_LOAD_ALL _UxGT("Zavést všechny")
#define MSG_MMU2_LOAD_TO_NOZZLE _UxGT("Zavést do trysky")
#define MSG_MMU2_EJECT_FILAMENT _UxGT("Vysunout filament")
#define MSG_MMU2_EJECT_FILAMENT0 _UxGT("Vysun. filament 1")
#define MSG_MMU2_EJECT_FILAMENT1 _UxGT("Vysun. filament 2")
#define MSG_MMU2_EJECT_FILAMENT2 _UxGT("Vysun. filament 3")
#define MSG_MMU2_EJECT_FILAMENT3 _UxGT("Vysun. filament 4")
#define MSG_MMU2_EJECT_FILAMENT4 _UxGT("Vysun. filament 5")
#define MSG_MMU2_UNLOAD_FILAMENT _UxGT("Vytáhnout filament")
#define MSG_MMU2_LOADING_FILAMENT _UxGT("Zavádění fil. %i...")
#define MSG_MMU2_EJECTING_FILAMENT _UxGT("Vytahování fil. ...")
#define MSG_MMU2_UNLOADING_FILAMENT _UxGT("Vysouvání fil....")
#define MSG_MMU2_ALL _UxGT("Všechny")
#define MSG_MMU2_FILAMENT0 _UxGT("Filament 1")
#define MSG_MMU2_FILAMENT1 _UxGT("Filament 2")
#define MSG_MMU2_FILAMENT2 _UxGT("Filament 3")
#define MSG_MMU2_FILAMENT3 _UxGT("Filament 4")
#define MSG_MMU2_FILAMENT4 _UxGT("Filament 5")
#define MSG_MMU2_RESET _UxGT("Resetovat MMU")
#define MSG_MMU2_RESETTING _UxGT("Resetování MMU...")
#define MSG_MMU2_EJECT_RECOVER _UxGT("Vytáhněte, klikněte")
#define MSG_MIX _UxGT("Mix")
#define MSG_MIX_COMPONENT _UxGT("Komponenta")
#define MSG_MIXER _UxGT("Mixér")
#define MSG_GRADIENT _UxGT("Přechod")
#define MSG_FULL_GRADIENT _UxGT("Celý přechod")
#define MSG_TOGGLE_MIX _UxGT("Přepnout mix")
#define MSG_CYCLE_MIX _UxGT("Střídat mix")
#define MSG_GRADIENT_MIX _UxGT("Přechod mix")
#define MSG_REVERSE_GRADIENT _UxGT("Opačný přechod")
#if LCD_WIDTH >= 20
#define MSG_ACTIVE_VTOOL _UxGT("Aktivní V-nástroj")
#define MSG_START_VTOOL _UxGT("Spustit V-nástroj")
#define MSG_END_VTOOL _UxGT("Ukončit V-nástroj")
#define MSG_GRADIENT_ALIAS _UxGT("Alias V-nástroje")
#define MSG_RESET_VTOOLS _UxGT("Resetovat V-nástroj")
#define MSG_COMMIT_VTOOL _UxGT("Uložit V-nástroj mix")
#define MSG_VTOOLS_RESET _UxGT("V-nástroj resetovat")
#else
#define MSG_ACTIVE_VTOOL _UxGT("Aktivní V-nástr.")
#define MSG_START_VTOOL _UxGT("Spustit V-nástr.")
#define MSG_END_VTOOL _UxGT("Ukončit V-nástr.")
#define MSG_GRADIENT_ALIAS _UxGT("Alias V-nástr.")
#define MSG_RESET_VTOOLS _UxGT("Reset. V-nástr.")
#define MSG_COMMIT_VTOOL _UxGT("Uložit V-nás. mix")
#define MSG_VTOOLS_RESET _UxGT("V-nástr. reset.")
#endif
#define MSG_START_Z _UxGT("Počáteční Z")
#define MSG_END_Z _UxGT(" Koncové Z")
#define MSG_BRICKOUT _UxGT("Brickout")
#define MSG_INVADERS _UxGT("Invaders")
#define MSG_SNAKE _UxGT("Sn4k3")
#define MSG_MAZE _UxGT("Bludiště")
#if LCD_HEIGHT >= 4 #if LCD_HEIGHT >= 4
// Up to 3 lines allowed // Up to 3 lines allowed
#define MSG_ADVANCED_PAUSE_WAITING_1 _UxGT("Stikněte tlačítko")
#define MSG_ADVANCED_PAUSE_WAITING_2 _UxGT("pro obnovení tisku")
#define MSG_PAUSE_PRINT_INIT_1 _UxGT("Parkování...")
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Čekejte prosím") #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Čekejte prosím")
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("na zahájení") #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("na zahájení")
#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("výměny filamentu") #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("výměny filamentu")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Čekejte prosím")
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("na vysunuti")
#define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("filamentu")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Vložte filament") #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Vložte filament")
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("a stiskněte") #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("a stiskněte")
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("tlačítko...") #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("tlačítko...")
@ -399,21 +508,46 @@
#define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("nahřátí trysky") #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("nahřátí trysky")
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Čekejte prosím") #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Čekejte prosím")
#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("na nahřátí tr.") #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("na nahřátí tr.")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Čekejte prosím")
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("na vysunuti")
#define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("filamentu")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Čekejte prosím") #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Čekejte prosím")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("na zavedení") #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("na zavedení")
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("filamentu") #define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("filamentu")
#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Vyčkejte na") #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Vyčkejte na")
#define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("vytlačení") #define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("vytlačení")
#define MSG_FILAMENT_CHANGE_CONT_PURGE_1 _UxGT("Klikněte pro")
#define MSG_FILAMENT_CHANGE_CONT_PURGE_2 _UxGT("ukončení")
#define MSG_FILAMENT_CHANGE_CONT_PURGE_3 _UxGT("vytlačování")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Čekejte prosím") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Čekejte prosím")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("na pokračování") #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("na pokračování")
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("tisku") #define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("tisku")
#else // LCD_HEIGHT < 4 #else // LCD_HEIGHT < 4
// Up to 2 lines allowed // Up to 2 lines allowed
#define MSG_ADVANCED_PAUSE_WAITING_1 _UxGT("Stikněte tlač.")
#define MSG_ADVANCED_PAUSE_WAITING_2 _UxGT("pro obnovení")
#define MSG_PAUSE_PRINT_INIT_1 _UxGT("Parkování...")
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Čekejte...") #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Čekejte...")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Vysouvání...")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Vložte, klikněte") #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Vložte, klikněte")
#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Klikněte pro")
#define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("nahřátí")
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Nahřívání...") #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Nahřívání...")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Vysouvání...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Zavádění...") #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Zavádění...")
#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Vytlačování...") #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Vytlačování...")
#define MSG_FILAMENT_CHANGE_CONT_PURGE_1 _UxGT("Klikněte pro")
#define MSG_FILAMENT_CHANGE_CONT_PURGE_2 _UxGT("ukončení")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Pokračování...") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Pokračování...")
#endif // LCD_HEIGHT < 4 #endif // LCD_HEIGHT < 4
#define MSG_TMC_DRIVERS _UxGT("TMC budiče")
#define MSG_TMC_CURRENT _UxGT("Proud budičů")
#define MSG_TMC_HYBRID_THRS _UxGT("Hybridní práh")
#define MSG_TMC_HOMING_THRS _UxGT("Domů bez senzorů")
#define MSG_TMC_STEPPING_MODE _UxGT("Režim kroků")
#define MSG_TMC_STEALTH_ENABLED _UxGT("StealthChop povolen")
#define MSG_SERVICE_RESET _UxGT("Reset")
#define MSG_SERVICE_IN _UxGT(" za:")
#define MSG_BACKLASH _UxGT("Vůle")
#define MSG_BACKLASH_CORRECTION _UxGT("Korekce")
#define MSG_BACKLASH_SMOOTHING _UxGT("Vyhlazení")

3
Marlin/src/lcd/language/language_en.h
View File

@ -1362,6 +1362,9 @@
#ifndef MSG_ADVANCED_PAUSE_WAITING_1 #ifndef MSG_ADVANCED_PAUSE_WAITING_1
#define MSG_ADVANCED_PAUSE_WAITING_1 _UxGT("Click to continue") #define MSG_ADVANCED_PAUSE_WAITING_1 _UxGT("Click to continue")
#endif #endif
#ifndef MSG_PAUSE_PRINT_INIT_1
#define MSG_PAUSE_PRINT_INIT_1 _UxGT("Parking...")
#endif
#ifndef MSG_FILAMENT_CHANGE_INIT_1 #ifndef MSG_FILAMENT_CHANGE_INIT_1
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Please wait...") #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Please wait...")
#endif #endif

14
Marlin/src/lcd/language/language_sk.h
View File

@ -40,6 +40,8 @@
#define THIS_LANGUAGES_SPECIAL_SYMBOLS _UxGT("äÄáÁčČďĎéÉíÍĺĹľĽňŇóÓôÔŕŔšŠťŤúÚýÝžŽ³") #define THIS_LANGUAGES_SPECIAL_SYMBOLS _UxGT("äÄáÁčČďĎéÉíÍĺĹľĽňŇóÓôÔŕŔšŠťŤúÚýÝžŽ³")
#define WELCOME_MSG MACHINE_NAME _UxGT(" pripravená.") #define WELCOME_MSG MACHINE_NAME _UxGT(" pripravená.")
#define MSG_YES _UxGT("ÁNO")
#define MSG_NO _UxGT("NIE")
#define MSG_BACK _UxGT("Naspäť") #define MSG_BACK _UxGT("Naspäť")
#define MSG_SD_INSERTED _UxGT("Karta vložená") #define MSG_SD_INSERTED _UxGT("Karta vložená")
#define MSG_SD_REMOVED _UxGT("Karta vybraná") #define MSG_SD_REMOVED _UxGT("Karta vybraná")
@ -104,6 +106,7 @@
#define MSG_UBL_TOOLS _UxGT("Nástroje UBL") #define MSG_UBL_TOOLS _UxGT("Nástroje UBL")
#define MSG_UBL_LEVEL_BED _UxGT("UBL rovnanie") #define MSG_UBL_LEVEL_BED _UxGT("UBL rovnanie")
#define MSG_IDEX_MENU _UxGT("IDEX režim") #define MSG_IDEX_MENU _UxGT("IDEX režim")
#define MSG_OFFSETS_MENU _UxGT("Offset nástrojov")
#define MSG_IDEX_MODE_AUTOPARK _UxGT("Auto-parkovanie") #define MSG_IDEX_MODE_AUTOPARK _UxGT("Auto-parkovanie")
#define MSG_IDEX_MODE_DUPLICATE _UxGT("Duplikácia") #define MSG_IDEX_MODE_DUPLICATE _UxGT("Duplikácia")
#define MSG_IDEX_MODE_MIRRORED_COPY _UxGT("Zrkadlená kópia") #define MSG_IDEX_MODE_MIRRORED_COPY _UxGT("Zrkadlená kópia")
@ -276,6 +279,9 @@
#define MSG_WATCH _UxGT("Info. obrazovka") #define MSG_WATCH _UxGT("Info. obrazovka")
#define MSG_PREPARE _UxGT("Príprava tlače") #define MSG_PREPARE _UxGT("Príprava tlače")
#define MSG_TUNE _UxGT("Doladenie tlače") #define MSG_TUNE _UxGT("Doladenie tlače")
#define MSG_START_PRINT _UxGT("Spustiť tlač")
#define MSG_BUTTON_PRINT _UxGT("Tlačiť")
#define MSG_BUTTON_CANCEL _UxGT("Zrušiť")
#define MSG_PAUSE_PRINT _UxGT("Pozastaviť tlač") #define MSG_PAUSE_PRINT _UxGT("Pozastaviť tlač")
#define MSG_RESUME_PRINT _UxGT("Obnoviť tlač") #define MSG_RESUME_PRINT _UxGT("Obnoviť tlač")
#define MSG_STOP_PRINT _UxGT("Zastaviť tlač") #define MSG_STOP_PRINT _UxGT("Zastaviť tlač")
@ -330,6 +336,7 @@
#define MSG_BABYSTEP_X _UxGT("Babystep X") #define MSG_BABYSTEP_X _UxGT("Babystep X")
#define MSG_BABYSTEP_Y _UxGT("Babystep Y") #define MSG_BABYSTEP_Y _UxGT("Babystep Y")
#define MSG_BABYSTEP_Z _UxGT("Babystep Z") #define MSG_BABYSTEP_Z _UxGT("Babystep Z")
#define MSG_BABYSTEP_TOTAL _UxGT("Celkom")
#define MSG_ENDSTOP_ABORT _UxGT("Zastavenie Endstop") #define MSG_ENDSTOP_ABORT _UxGT("Zastavenie Endstop")
#define MSG_HEATING_FAILED_LCD _UxGT("Chyba ohrevu") #define MSG_HEATING_FAILED_LCD _UxGT("Chyba ohrevu")
#define MSG_HEATING_FAILED_LCD_BED _UxGT("Chyba ohrevu podl.") #define MSG_HEATING_FAILED_LCD_BED _UxGT("Chyba ohrevu podl.")
@ -461,6 +468,10 @@
#define MSG_VTOOLS_RESET _UxGT("V-tools resetované") #define MSG_VTOOLS_RESET _UxGT("V-tools resetované")
#define MSG_START_Z _UxGT("Počiat.Z") #define MSG_START_Z _UxGT("Počiat.Z")
#define MSG_END_Z _UxGT("Konečn.Z") #define MSG_END_Z _UxGT("Konečn.Z")
#define MSG_BRICKOUT _UxGT("Brickout")
#define MSG_INVADERS _UxGT("Nájazdníci")
#define MSG_SNAKE _UxGT("Had")
#define MSG_MAZE _UxGT("Bludisko")
// //
// Filament Change screens show up to 3 lines on a 4-line display // Filament Change screens show up to 3 lines on a 4-line display
@ -515,3 +526,6 @@
#define MSG_SERVICE_RESET _UxGT("Vynulovať") #define MSG_SERVICE_RESET _UxGT("Vynulovať")
#define MSG_SERVICE_IN _UxGT(" za:") #define MSG_SERVICE_IN _UxGT(" za:")
#define MSG_BACKLASH _UxGT("Kompenz. vôle")
#define MSG_BACKLASH_CORRECTION _UxGT("Korekcia")
#define MSG_BACKLASH_SMOOTHING _UxGT("Vyhladzovanie")

4
Marlin/src/lcd/menu/menu.cpp
View File

@ -167,9 +167,9 @@ DEFINE_MENU_EDIT_ITEM(float3); // 123 right-justified
DEFINE_MENU_EDIT_ITEM(float52); // 123.45 DEFINE_MENU_EDIT_ITEM(float52); // 123.45
DEFINE_MENU_EDIT_ITEM(float43); // 1.234 DEFINE_MENU_EDIT_ITEM(float43); // 1.234
DEFINE_MENU_EDIT_ITEM(float5); // 12345 right-justified DEFINE_MENU_EDIT_ITEM(float5); // 12345 right-justified
DEFINE_MENU_EDIT_ITEM(float51); // +1234.5 DEFINE_MENU_EDIT_ITEM(float51); // 1234.5 right-justified
DEFINE_MENU_EDIT_ITEM(float51sign); // +1234.5
DEFINE_MENU_EDIT_ITEM(float52sign); // +123.45 DEFINE_MENU_EDIT_ITEM(float52sign); // +123.45
DEFINE_MENU_EDIT_ITEM(float62); // 1234.56 right-justified
DEFINE_MENU_EDIT_ITEM(long5); // 12345 right-justified DEFINE_MENU_EDIT_ITEM(long5); // 12345 right-justified
void MenuItem_bool::action_edit(PGM_P pstr, bool *ptr, screenFunc_t callback) { void MenuItem_bool::action_edit(PGM_P pstr, bool *ptr, screenFunc_t callback) {

18
Marlin/src/lcd/menu/menu.h
View File

@ -24,6 +24,8 @@
#include "../ultralcd.h" #include "../ultralcd.h"
#include "../../inc/MarlinConfig.h" #include "../../inc/MarlinConfig.h"
#include "limits.h"
extern int8_t encoderLine, encoderTopLine, screen_items; extern int8_t encoderLine, encoderTopLine, screen_items;
extern bool screen_changed; extern bool screen_changed;
@ -54,9 +56,9 @@ DECLARE_MENU_EDIT_TYPE(float, float3, ftostr3, 1 ); // 123
DECLARE_MENU_EDIT_TYPE(float, float52, ftostr52, 100 ); // 123.45 DECLARE_MENU_EDIT_TYPE(float, float52, ftostr52, 100 ); // 123.45
DECLARE_MENU_EDIT_TYPE(float, float43, ftostr43sign, 1000 ); // 1.234 DECLARE_MENU_EDIT_TYPE(float, float43, ftostr43sign, 1000 ); // 1.234
DECLARE_MENU_EDIT_TYPE(float, float5, ftostr5rj, 0.01f ); // 12345 right-justified DECLARE_MENU_EDIT_TYPE(float, float5, ftostr5rj, 0.01f ); // 12345 right-justified
DECLARE_MENU_EDIT_TYPE(float, float51, ftostr51sign, 10 ); // +1234.5 DECLARE_MENU_EDIT_TYPE(float, float51, ftostr51rj, 10 ); // 1234.5 right-justified
DECLARE_MENU_EDIT_TYPE(float, float51sign, ftostr51sign, 10 ); // +1234.5
DECLARE_MENU_EDIT_TYPE(float, float52sign, ftostr52sign, 100 ); // +123.45 DECLARE_MENU_EDIT_TYPE(float, float52sign, ftostr52sign, 100 ); // +123.45
DECLARE_MENU_EDIT_TYPE(float, float62, ftostr62rj, 100 ); // 1234.56 right-justified
DECLARE_MENU_EDIT_TYPE(uint32_t, long5, ftostr5rj, 0.01f ); // 12345 right-justified DECLARE_MENU_EDIT_TYPE(uint32_t, long5, ftostr5rj, 0.01f ); // 12345 right-justified
//////////////////////////////////////////// ////////////////////////////////////////////
@ -119,9 +121,9 @@ DEFINE_DRAW_MENU_ITEM_SETTING_EDIT(float3); // 123 right-justif
DEFINE_DRAW_MENU_ITEM_SETTING_EDIT(float52); // 123.45 DEFINE_DRAW_MENU_ITEM_SETTING_EDIT(float52); // 123.45
DEFINE_DRAW_MENU_ITEM_SETTING_EDIT(float43); // 1.234 DEFINE_DRAW_MENU_ITEM_SETTING_EDIT(float43); // 1.234
DEFINE_DRAW_MENU_ITEM_SETTING_EDIT(float5); // 12345 right-justified DEFINE_DRAW_MENU_ITEM_SETTING_EDIT(float5); // 12345 right-justified
DEFINE_DRAW_MENU_ITEM_SETTING_EDIT(float51); // +1234.5 DEFINE_DRAW_MENU_ITEM_SETTING_EDIT(float51); // 1234.5 right-justified
DEFINE_DRAW_MENU_ITEM_SETTING_EDIT(float51sign); // +1234.5
DEFINE_DRAW_MENU_ITEM_SETTING_EDIT(float52sign); // +123.45 DEFINE_DRAW_MENU_ITEM_SETTING_EDIT(float52sign); // +123.45
DEFINE_DRAW_MENU_ITEM_SETTING_EDIT(float62); // 1234.56 right-justified
DEFINE_DRAW_MENU_ITEM_SETTING_EDIT(long5); // 12345 right-justified DEFINE_DRAW_MENU_ITEM_SETTING_EDIT(long5); // 12345 right-justified
#define draw_menu_item_edit_bool(sel, row, pstr, pstr2, data, ...) DRAW_BOOL_SETTING(sel, row, pstr, data) #define draw_menu_item_edit_bool(sel, row, pstr, pstr2, data, ...) DRAW_BOOL_SETTING(sel, row, pstr, data)
@ -179,8 +181,10 @@ class TMenuItem : MenuItemBase {
static char* to_string(const int16_t value) { return NAME::strfunc(unscale(value)); } static char* to_string(const int16_t value) { return NAME::strfunc(unscale(value)); }
public: public:
static void action_edit(PGM_P const pstr, type_t * const ptr, const type_t minValue, const type_t maxValue, const screenFunc_t callback=NULL, const bool live=false) { static void action_edit(PGM_P const pstr, type_t * const ptr, const type_t minValue, const type_t maxValue, const screenFunc_t callback=NULL, const bool live=false) {
const int16_t minv = scale(minValue); // Make sure minv and maxv fit within int16_t
init(pstr, ptr, minv, int16_t(scale(maxValue)) - minv, int16_t(scale(*ptr)) - minv, edit, callback, live); const int16_t minv = MAX(scale(minValue), INT16_MIN),
maxv = MIN(scale(maxValue), INT16_MAX);
init(pstr, ptr, minv, maxv - minv, scale(*ptr) - minv, edit, callback, live);
} }
static void edit() { MenuItemBase::edit(to_string, load); } static void edit() { MenuItemBase::edit(to_string, load); }
}; };
@ -199,8 +203,8 @@ DECLARE_MENU_EDIT_ITEM(float52);
DECLARE_MENU_EDIT_ITEM(float43); DECLARE_MENU_EDIT_ITEM(float43);
DECLARE_MENU_EDIT_ITEM(float5); DECLARE_MENU_EDIT_ITEM(float5);
DECLARE_MENU_EDIT_ITEM(float51); DECLARE_MENU_EDIT_ITEM(float51);
DECLARE_MENU_EDIT_ITEM(float51sign);
DECLARE_MENU_EDIT_ITEM(float52sign); DECLARE_MENU_EDIT_ITEM(float52sign);
DECLARE_MENU_EDIT_ITEM(float62);
DECLARE_MENU_EDIT_ITEM(long5); DECLARE_MENU_EDIT_ITEM(long5);
class MenuItem_bool { class MenuItem_bool {

8
Marlin/src/lcd/menu/menu_advanced.cpp
View File

@ -571,14 +571,14 @@ void menu_backlash();
START_MENU(); START_MENU();
MENU_BACK(MSG_ADVANCED_SETTINGS); MENU_BACK(MSG_ADVANCED_SETTINGS);
#define EDIT_QSTEPS(Q) MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_##Q##STEPS, &planner.settings.axis_steps_per_mm[_AXIS(Q)], 5, 9999, _planner_refresh_positioning) #define EDIT_QSTEPS(Q) MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float51, MSG_##Q##STEPS, &planner.settings.axis_steps_per_mm[_AXIS(Q)], 5, 9999, _planner_refresh_positioning)
EDIT_QSTEPS(A); EDIT_QSTEPS(A);
EDIT_QSTEPS(B); EDIT_QSTEPS(B);
EDIT_QSTEPS(C); EDIT_QSTEPS(C);
#if ENABLED(DISTINCT_E_FACTORS) #if ENABLED(DISTINCT_E_FACTORS)
#define EDIT_ESTEPS(N,E) MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_E##N##STEPS, &planner.settings.axis_steps_per_mm[E_AXIS_N(E)], 5, 9999, _planner_refresh_e##E##_positioning) #define EDIT_ESTEPS(N,E) MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float51, MSG_E##N##STEPS, &planner.settings.axis_steps_per_mm[E_AXIS_N(E)], 5, 9999, _planner_refresh_e##E##_positioning)
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_ESTEPS, &planner.settings.axis_steps_per_mm[E_AXIS_N(active_extruder)], 5, 9999, _planner_refresh_positioning); MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float51, MSG_ESTEPS, &planner.settings.axis_steps_per_mm[E_AXIS_N(active_extruder)], 5, 9999, _planner_refresh_positioning);
EDIT_ESTEPS(1,0); EDIT_ESTEPS(1,0);
EDIT_ESTEPS(2,1); EDIT_ESTEPS(2,1);
#if E_STEPPERS > 2 #if E_STEPPERS > 2
@ -594,7 +594,7 @@ void menu_backlash();
#endif // E_STEPPERS > 3 #endif // E_STEPPERS > 3
#endif // E_STEPPERS > 2 #endif // E_STEPPERS > 2
#elif E_STEPPERS #elif E_STEPPERS
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_ESTEPS, &planner.settings.axis_steps_per_mm[E_AXIS], 5, 9999, _planner_refresh_positioning); MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float51, MSG_ESTEPS, &planner.settings.axis_steps_per_mm[E_AXIS], 5, 9999, _planner_refresh_positioning);
#endif #endif
END_MENU(); END_MENU();

11
Marlin/src/module/probe.cpp
View File

@ -310,6 +310,10 @@ inline void do_probe_raise(const float z_raise) {
FORCE_INLINE void probe_specific_action(const bool deploy) { FORCE_INLINE void probe_specific_action(const bool deploy) {
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) #if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
do {
#if ENABLED(PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED)
if (deploy == (READ(Z_MIN_PROBE_PIN) == Z_MIN_PROBE_ENDSTOP_INVERTING)) break;
#endif
BUZZ(100, 659); BUZZ(100, 659);
BUZZ(100, 698); BUZZ(100, 698);
@ -328,6 +332,13 @@ FORCE_INLINE void probe_specific_action(const bool deploy) {
while (wait_for_user) idle(); while (wait_for_user) idle();
ui.reset_status(); ui.reset_status();
KEEPALIVE_STATE(IN_HANDLER); KEEPALIVE_STATE(IN_HANDLER);
} while(
#if ENABLED(PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED)
true
#else
false
#endif
);
#endif // PAUSE_BEFORE_DEPLOY_STOW #endif // PAUSE_BEFORE_DEPLOY_STOW

2
Marlin/src/pins/pins.h
View File

@ -316,6 +316,8 @@
#include "pins_RAMPS_RE_ARM.h" // LPC1768 env:LPC1768 #include "pins_RAMPS_RE_ARM.h" // LPC1768 env:LPC1768
#elif MB(MKS_SBASE) #elif MB(MKS_SBASE)
#include "pins_MKS_SBASE.h" // LPC1768 env:LPC1768 #include "pins_MKS_SBASE.h" // LPC1768 env:LPC1768
#elif MB(MKS_SGEN)
#include "pins_MKS_SGEN.h" // LPC1769 env:LPC1769
#elif MB(AZSMZ_MINI) #elif MB(AZSMZ_MINI)
#include "pins_AZSMZ_MINI.h" // LPC1768 env:LPC1768 #include "pins_AZSMZ_MINI.h" // LPC1768 env:LPC1768
#elif MB(AZTEEG_X5_GT) #elif MB(AZTEEG_X5_GT)

10
Marlin/src/pins/pins_AZTEEG_X5_MINI.h
View File

@ -185,13 +185,9 @@
// //
// SD Support // SD Support
// //
//#define USB_SD_DISABLED // Disable host access to SD card as mass storage device through USB #if !ANY(LPC_SD_LCD, LPC_SD_ONBOARD, LPC_SD_CUSTOM_CABLE)
//#define USB_SD_ONBOARD // Enable host access to SD card as mass storage device through USB #define LPC_SD_ONBOARD
#endif
//#define LPC_SD_LCD // Marlin uses the SD drive attached to the LCD
#define LPC_SD_ONBOARD // Marlin uses the SD drive on the control board. There is no SD detect pin
// for the onboard card. Init card from LCD menu or send M21 whenever printer
// is powered on to enable SD access.
#if ENABLED(LPC_SD_LCD) #if ENABLED(LPC_SD_LCD)

17
Marlin/src/pins/pins_BIGTREE_SKR_V1.3.h
View File

@ -208,15 +208,24 @@
#define LCD_PINS_D7 P1_23 #define LCD_PINS_D7 P1_23
#endif #endif
#if ENABLED(MKS_MINI_12864)
#define DOGLCD_CS P1_21
#define DOGLCD_A0 P1_22
#endif
#endif #endif
#endif // ULTRA_LCD #endif // ULTRA_LCD
//#define USB_SD_DISABLED //
#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device // SD Support
//
#define LPC_SD_LCD // Marlin uses the SD drive attached to the LCD #if !ANY(LPC_SD_LCD, LPC_SD_ONBOARD, LPC_SD_CUSTOM_CABLE)
//#define LPC_SD_ONBOARD // Marlin uses the SD drive on the control board #undef USB_SD_DISABLED
#define USB_SD_ONBOARD
#define LPC_SD_LCD
#endif
#if ENABLED(LPC_SD_LCD) #if ENABLED(LPC_SD_LCD)

25
Marlin/src/pins/pins_BIQU_SKR_V1.1.h
View File

@ -105,18 +105,29 @@
#define LCD_PINS_RS P0_16 #define LCD_PINS_RS P0_16
#define LCD_PINS_ENABLE P0_18 #define LCD_PINS_ENABLE P0_18
#define LCD_PINS_D4 P0_15 #define LCD_PINS_D4 P0_15
#if ENABLED(MKS_MINI_12864)
#define DOGLCD_CS P2_06
#define DOGLCD_A0 P0_16
#endif
#endif #endif
// //
// SD Support // SD Support
// //
//#define USB_SD_DISABLED // Disable host access to SD card as mass storage device through USB // MKS_MINI_12864 strongly prefers the SD card on the display and
#define USB_SD_ONBOARD // Enable host access to SD card as mass storage device through USB // requires jumpers on the SKR V1.1 board as documented here:
// https://www.facebook.com/groups/505736576548648/permalink/630639874058317/
//#define LPC_SD_LCD // Marlin uses the SD drive attached to the LCD #if !ANY(LPC_SD_LCD, LPC_SD_ONBOARD, LPC_SD_CUSTOM_CABLE)
#define LPC_SD_ONBOARD // Marlin uses the SD drive on the control board. There is no SD detect pin #if ENABLED(MKS_MINI_12864)
// for the onboard card. Init card from LCD menu or send M21 whenever printer #define LPC_SD_LCD
// is powered on to enable SD access. #undef USB_SD_DISABLED
#define USB_SD_ONBOARD
#else
#define USB_SD_ONBOARD
#define LPC_SD_ONBOARD
#endif
#endif
#if ENABLED(LPC_SD_LCD) #if ENABLED(LPC_SD_LCD)

2
Marlin/src/pins/pins_FORMBOT_TREX3.h
View File

@ -143,7 +143,7 @@
#define LED_PIN 13 #define LED_PIN 13
#endif #endif
#define SPINDLE_LASER_PWM_PIN 7 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN -1 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENA_PIN 4 // Pin should have a pullup! #define SPINDLE_LASER_ENA_PIN 4 // Pin should have a pullup!
// Use the RAMPS 1.4 Analog input 5 on the AUX2 connector // Use the RAMPS 1.4 Analog input 5 on the AUX2 connector

63
Marlin/src/pins/pins_MKS_SBASE.h
View File

@ -28,8 +28,12 @@
#error "Oops! Make sure you have the LPC1768 environment selected in your IDE." #error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
#endif #endif
#ifndef BOARD_NAME
#define BOARD_NAME "MKS SBASE" #define BOARD_NAME "MKS SBASE"
#endif
#ifndef BOARD_WEBSITE_URL
#define BOARD_WEBSITE_URL "https://github.com/makerbase-mks/MKS-SBASE" #define BOARD_WEBSITE_URL "https://github.com/makerbase-mks/MKS-SBASE"
#endif
#define LED_PIN P1_18 // Used as a status indicator #define LED_PIN P1_18 // Used as a status indicator
#define LED2_PIN P1_19 #define LED2_PIN P1_19
@ -154,23 +158,11 @@
#define ENET_TXD0 P1_00 // J12-11 #define ENET_TXD0 P1_00 // J12-11
#define ENET_TXD1 P1_01 // J12-12 #define ENET_TXD1 P1_01 // J12-12
/** #if !ANY(LPC_SD_LCD, LPC_SD_ONBOARD, LPC_SD_CUSTOM_CABLE)
* The SBase can share the on-board SD card with a PC via USB the following #undef USB_SD_DISABLED
* definitions control this feature: #define USB_SD_ONBOARD
*/ #define LPC_SD_ONBOARD
//#define USB_SD_DISABLED #endif
#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device
/**
* There are a number of configurations available for the SBase SD card reader.
* - A custom cable can be used to allow access to the LCD based SD card.
* - A standard cable can be used for access to the LCD SD card (but no SD detect).
* - The onboard SD card can be used and optionally shared with a PC via USB.
*/
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD
//#define LPC_SD_LCD // Marlin uses the SD drive attached to the LCD
#define LPC_SD_ONBOARD // Marlin uses the SD drive attached to the control board
#if ENABLED(LPC_SD_CUSTOM_CABLE) #if ENABLED(LPC_SD_CUSTOM_CABLE)
@ -249,6 +241,41 @@
#define DOGLCD_SCK SCK_PIN #define DOGLCD_SCK SCK_PIN
#define DOGLCD_MOSI MOSI_PIN #define DOGLCD_MOSI MOSI_PIN
#endif #endif
#if ENABLED(FYSETC_MINI_12864)
/**
* The Fysetc display can NOT use the SCK and MOSI pins on EXP2, so a
* special cable is needed to go between EXP2 on the FYSETC and the
* controller board's EXP2 and J8. It also means that a software SPI
* is needed to drive those pins.
*
* The Fysetc requires mode 3 SPI interface.
*
* Pins 6, 7 & 8 on EXP2 are no connects. That means a second special
* cable will be needed if the RGB LEDs are to be active.
*/
#define DOGLCD_CS LCD_PINS_ENABLE // EXP1.3 (LCD_EN on Fysetc schematic)
#define DOGLCD_A0 LCD_PINS_RS // EXP1.4 (LCD_A0 on Fysetc schematic)
#define DOGLCD_SCK P2_11 // J8-5 (SCK on Fysetc schematic)
#define DOGLCD_MOSI P4_28 // J8-6 (MOSI on Fysetc schematic)
#define RGB_LED
//#define RGBW_LED
#if EITHER(RGB_LED, RGBW_LED)
#define RGB_LED_R_PIN P2_12 // J8-4 (LCD_D6 on Fysetc schematic)
#define RGB_LED_G_PIN P1_23 // J8-3 (LCD_D5 on Fysetc schematic)
#define RGB_LED_B_PIN P1_22 // J8-2 (LCD_D7 on Fysetc schematic)
//#define RGB_LED_W_PIN -1
#endif
#elif ENABLED(MINIPANEL)
// GLCD features
// Uncomment screen orientation
//#define LCD_SCREEN_ROT_90
//#define LCD_SCREEN_ROT_180
//#define LCD_SCREEN_ROT_270
#endif
#endif #endif
/** /**
@ -281,7 +308,7 @@
#endif #endif
#endif #endif
#if HAS_DRIVER(TMC2208) #if MB(MKS_SBASE) && HAS_DRIVER(TMC2208)
// The shortage of pins becomes apparent. // The shortage of pins becomes apparent.
// Worst case you may have to give up the LCD // Worst case you may have to give up the LCD
// RX pins need to be interrupt capable // RX pins need to be interrupt capable

60
Marlin/src/pins/pins_MKS_SGEN.h Normal file
View File

@ -0,0 +1,60 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* MKS SGen pin assignments
*/
#ifndef LPC1769
#error "Oops! Make sure you have the LPC1769 environment selected in your IDE."
#endif
#define BOARD_NAME "MKS SGEN"
#define BOARD_WEBSITE_URL "https://github.com/makerbase-mks/MKS-SGEN"
#include "pins_MKS_SBASE.h"
#undef E1_STEP_PIN
#undef E1_DIR_PIN
#undef E1_ENABLE_PIN
//#undef BTN_EN1
//#undef BTN_EN2
//#define BTN_EN1 P1_23 // EXP2.5
//#define BTN_EN2 P1_22 // EXP2.3
#if HAS_DRIVER(TMC2208)
// The shortage of pins becomes apparent.
// In the worst case you may have to give up the LCD.
// RX pins must be interrupt-capable.
#define X_SERIAL_TX_PIN P4_29 // J8-2
#define X_SERIAL_RX_PIN P4_29 // J8-2
#define Y_SERIAL_TX_PIN P2_08 // J8-3
#define Y_SERIAL_RX_PIN P2_08 // J8-3
#define Z_SERIAL_TX_PIN P2_11 // J8-4
#define Z_SERIAL_RX_PIN P2_11 // J8-4
#define E0_SERIAL_TX_PIN P2_13 // J8-5
#define E0_SERIAL_RX_PIN P2_13 // J8-5
#endif

5
Marlin/src/pins/pins_RAMPS_FD_V1.h
View File

@ -156,7 +156,10 @@
#define LCD_PINS_D7 29 #define LCD_PINS_D7 29
#endif #endif
#if ENABLED(MINIPANEL) #if ENABLED(FYSETC_MINI_12864)
#define DOGLCD_CS LCD_PINS_ENABLE
#define DOGLCD_A0 LCD_PINS_RS
#elif ENABLED(MINIPANEL)
#define DOGLCD_CS 25 #define DOGLCD_CS 25
#define DOGLCD_A0 27 #define DOGLCD_A0 27
#endif #endif

54
Marlin/src/pins/pins_RAMPS_RE_ARM.h
View File

@ -269,11 +269,21 @@
#elif ENABLED(ULTRA_LCD) #elif ENABLED(ULTRA_LCD)
//#define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3
//#define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3
//#define MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3
//#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS)
#if ENABLED(FYSETC_MINI_12864)
#define BEEPER_PIN P1_01
#define BTN_ENC P1_04
#else
#define BEEPER_PIN P1_30 // (37) not 5V tolerant #define BEEPER_PIN P1_30 // (37) not 5V tolerant
#define BTN_ENC P2_11 // (35) J3-3 & AUX-4
#endif
#define BTN_EN1 P3_26 // (31) J3-2 & AUX-4 #define BTN_EN1 P3_26 // (31) J3-2 & AUX-4
#define BTN_EN2 P3_25 // (33) J3-4 & AUX-4 #define BTN_EN2 P3_25 // (33) J3-4 & AUX-4
#define BTN_ENC P2_11 // (35) J3-3 & AUX-4
#define SD_DETECT_PIN P1_31 // (49) J3-1 & AUX-3 (NOT 5V tolerant) #define SD_DETECT_PIN P1_31 // (49) J3-1 & AUX-3 (NOT 5V tolerant)
#define KILL_PIN P1_22 // (41) J5-4 & AUX-4 #define KILL_PIN P1_22 // (41) J5-4 & AUX-4
@ -296,13 +306,6 @@
#if ANY(VIKI2, miniVIKI) #if ANY(VIKI2, miniVIKI)
// #define LCD_SCREEN_ROT_180 // #define LCD_SCREEN_ROT_180
#define BTN_EN1 P3_26 // (31) J3-2 & AUX-4
#define BTN_EN2 P3_25 // (33) J3-4 & AUX-4
#define BTN_ENC P2_11 // (35) J3-3 & AUX-4
#define SD_DETECT_PIN P1_31 // (49) J3-1 & AUX-3 (NOT 5V tolerant)
#define KILL_PIN P1_22 // (41) J5-4 & AUX-4
#define DOGLCD_CS P0_16 // (16) #define DOGLCD_CS P0_16 // (16)
#define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2 #define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2
#define DOGLCD_SCK SCK_PIN #define DOGLCD_SCK SCK_PIN
@ -311,8 +314,17 @@
#define STAT_LED_BLUE_PIN P0_26 //(63) may change if cable changes #define STAT_LED_BLUE_PIN P0_26 //(63) may change if cable changes
#define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes #define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes
#else #else
#if ENABLED(FYSETC_MINI_12864)
#define DOGLCD_SCK P0_15
#define DOGLCD_MOSI P0_18
#define DOGLCD_CS P1_09 // use Ethernet connector for EXP1 cable signals
#define DOGLCD_A0 P1_14
#else
#define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2 #define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2
#define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2 #define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2
#endif
#define LCD_BACKLIGHT_PIN P0_16 //(16) J3-7 & AUX-4 - only used on DOGLCD controllers #define LCD_BACKLIGHT_PIN P0_16 //(16) J3-7 & AUX-4 - only used on DOGLCD controllers
#define LCD_PINS_ENABLE P0_18 // (51) (MOSI) J3-10 & AUX-3 #define LCD_PINS_ENABLE P0_18 // (51) (MOSI) J3-10 & AUX-3
#define LCD_PINS_D4 P0_15 // (52) (SCK) J3-9 & AUX-3 #define LCD_PINS_D4 P0_15 // (52) (SCK) J3-9 & AUX-3
@ -323,11 +335,6 @@
#endif #endif
#endif #endif
//#define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3
//#define MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3
//#define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3
//#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS)
#if ENABLED(MINIPANEL) #if ENABLED(MINIPANEL)
// GLCD features // GLCD features
// Uncomment screen orientation // Uncomment screen orientation
@ -354,18 +361,21 @@
#define ENET_TXD0 P1_00 // (78) J12-11 #define ENET_TXD0 P1_00 // (78) J12-11
#define ENET_TXD1 P1_01 // (79) J12-12 #define ENET_TXD1 P1_01 // (79) J12-12
//#define USB_SD_DISABLED //
#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device // SD Support
//
//#define LPC_SD_LCD // Marlin uses the SD drive attached to the LCD #if !ANY(LPC_SD_LCD, LPC_SD_ONBOARD, LPC_SD_CUSTOM_CABLE)
#define LPC_SD_ONBOARD // Marlin uses the SD drive on the control board #undef USB_SD_DISABLED
#define USB_SD_ONBOARD
#define LPC_SD_ONBOARD
#endif
#if ENABLED(LPC_SD_LCD) #if ENABLED(LPC_SD_LCD)
#define SCK_PIN P0_15 #define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3
#define MISO_PIN P0_17 #define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3
#define MOSI_PIN P0_18 #define MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3
#define SS_PIN P1_23 // Chip select for SD card used by Marlin #define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS) - CS used by Marlin
#define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card #define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card
#elif ENABLED(LPC_SD_ONBOARD) #elif ENABLED(LPC_SD_ONBOARD)

1
Marlin/src/sd/cardreader.cpp
View File

@ -1030,6 +1030,7 @@ void CardReader::printingHasFinished() {
// be zeroed and written instead of deleted. // be zeroed and written instead of deleted.
void CardReader::removeJobRecoveryFile() { void CardReader::removeJobRecoveryFile() {
if (jobRecoverFileExists()) { if (jobRecoverFileExists()) {
recovery.init();
removeFile(job_recovery_file_name); removeFile(job_recovery_file_name);
#if ENABLED(DEBUG_POWER_LOSS_RECOVERY) #if ENABLED(DEBUG_POWER_LOSS_RECOVERY)
SERIAL_ECHOPGM("Power-loss file delete"); SERIAL_ECHOPGM("Power-loss file delete");

3
config/default/Configuration.h
View File

@ -927,6 +927,9 @@
// Before deploy/stow pause for user confirmation // Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW //#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/** /**
* Enable one or more of the following if probing seems unreliable. * Enable one or more of the following if probing seems unreliable.

11
config/default/Configuration_adv.h
View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

3
config/examples/3DFabXYZ/Migbot/Configuration.h
View File

@ -933,6 +933,9 @@
// Before deploy/stow pause for user confirmation // Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW //#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/** /**
* Enable one or more of the following if probing seems unreliable. * Enable one or more of the following if probing seems unreliable.

11
config/examples/3DFabXYZ/Migbot/Configuration_adv.h
View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

3
config/examples/AlephObjects/TAZ4/Configuration.h
View File

@ -947,6 +947,9 @@
// Before deploy/stow pause for user confirmation // Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW //#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/** /**
* Enable one or more of the following if probing seems unreliable. * Enable one or more of the following if probing seems unreliable.

11
config/examples/AlephObjects/TAZ4/Configuration_adv.h
View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

3
config/examples/AliExpress/CL-260/Configuration.h
View File

@ -927,6 +927,9 @@
// Before deploy/stow pause for user confirmation // Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW //#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/** /**
* Enable one or more of the following if probing seems unreliable. * Enable one or more of the following if probing seems unreliable.

3
config/examples/AliExpress/UM2pExt/Configuration.h
View File

@ -938,6 +938,9 @@
// Before deploy/stow pause for user confirmation // Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW //#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/** /**
* Enable one or more of the following if probing seems unreliable. * Enable one or more of the following if probing seems unreliable.

11
config/examples/AliExpress/UM2pExt/Configuration_adv.h
View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

3
config/examples/Anet/A2/Configuration.h
View File

@ -927,6 +927,9 @@
// Before deploy/stow pause for user confirmation // Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW //#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/** /**
* Enable one or more of the following if probing seems unreliable. * Enable one or more of the following if probing seems unreliable.

11
config/examples/Anet/A2/Configuration_adv.h
View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

3
config/examples/Anet/A2plus/Configuration.h
View File

@ -927,6 +927,9 @@
// Before deploy/stow pause for user confirmation // Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW //#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/** /**
* Enable one or more of the following if probing seems unreliable. * Enable one or more of the following if probing seems unreliable.

11
config/examples/Anet/A2plus/Configuration_adv.h
View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

3
config/examples/Anet/A6/Configuration.h
View File

@ -1003,6 +1003,9 @@
// Before deploy/stow pause for user confirmation // Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW //#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/** /**
* Enable one or more of the following if probing seems unreliable. * Enable one or more of the following if probing seems unreliable.

11
config/examples/Anet/A6/Configuration_adv.h
View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

3
config/examples/Anet/A8/Configuration.h
View File

@ -940,6 +940,9 @@
// Before deploy/stow pause for user confirmation // Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW //#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/** /**
* Enable one or more of the following if probing seems unreliable. * Enable one or more of the following if probing seems unreliable.

11
config/examples/Anet/A8/Configuration_adv.h
View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

3
config/examples/AnyCubic/i3/Configuration.h
View File

@ -937,6 +937,9 @@
// Before deploy/stow pause for user confirmation // Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW //#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/** /**
* Enable one or more of the following if probing seems unreliable. * Enable one or more of the following if probing seems unreliable.

11
config/examples/AnyCubic/i3/Configuration_adv.h
View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

3
config/examples/ArmEd/Configuration.h
View File

@ -928,6 +928,9 @@
// Before deploy/stow pause for user confirmation // Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW //#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/** /**
* Enable one or more of the following if probing seems unreliable. * Enable one or more of the following if probing seems unreliable.

11
config/examples/ArmEd/Configuration_adv.h
View File

@ -911,6 +911,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

3
config/examples/Azteeg/X5GT/Configuration.h
View File

@ -927,6 +927,9 @@
// Before deploy/stow pause for user confirmation // Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW //#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/** /**
* Enable one or more of the following if probing seems unreliable. * Enable one or more of the following if probing seems unreliable.

3
config/examples/BIBO/TouchX/cyclops/Configuration.h
View File

@ -927,6 +927,9 @@
// Before deploy/stow pause for user confirmation // Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW //#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/** /**
* Enable one or more of the following if probing seems unreliable. * Enable one or more of the following if probing seems unreliable.

11
config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

3
config/examples/BIBO/TouchX/default/Configuration.h
View File

@ -927,6 +927,9 @@
// Before deploy/stow pause for user confirmation // Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW //#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/** /**
* Enable one or more of the following if probing seems unreliable. * Enable one or more of the following if probing seems unreliable.

11
config/examples/BIBO/TouchX/default/Configuration_adv.h
View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

3
config/examples/BQ/Hephestos/Configuration.h
View File

@ -915,6 +915,9 @@
// Before deploy/stow pause for user confirmation // Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW //#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/** /**
* Enable one or more of the following if probing seems unreliable. * Enable one or more of the following if probing seems unreliable.

11
config/examples/BQ/Hephestos/Configuration_adv.h
View File

@ -904,6 +904,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

3
config/examples/BQ/Hephestos_2/Configuration.h
View File

@ -928,6 +928,9 @@
// Before deploy/stow pause for user confirmation // Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW //#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/** /**
* Enable one or more of the following if probing seems unreliable. * Enable one or more of the following if probing seems unreliable.

11
config/examples/BQ/Hephestos_2/Configuration_adv.h
View File

@ -912,6 +912,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

3
config/examples/BQ/WITBOX/Configuration.h
View File

@ -915,6 +915,9 @@
// Before deploy/stow pause for user confirmation // Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW //#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/** /**
* Enable one or more of the following if probing seems unreliable. * Enable one or more of the following if probing seems unreliable.

11
config/examples/BQ/WITBOX/Configuration_adv.h
View File

@ -904,6 +904,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

3
config/examples/Cartesio/Configuration.h
View File

@ -926,6 +926,9 @@
// Before deploy/stow pause for user confirmation // Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW //#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/** /**
* Enable one or more of the following if probing seems unreliable. * Enable one or more of the following if probing seems unreliable.

11
config/examples/Cartesio/Configuration_adv.h
View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

3
config/examples/Creality/CR-10/Configuration.h
View File

@ -937,6 +937,9 @@
// Before deploy/stow pause for user confirmation // Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW //#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/** /**
* Enable one or more of the following if probing seems unreliable. * Enable one or more of the following if probing seems unreliable.

11
config/examples/Creality/CR-10/Configuration_adv.h
View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

3
config/examples/Creality/CR-10S/Configuration.h
View File

@ -927,6 +927,9 @@
// Before deploy/stow pause for user confirmation // Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW //#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/** /**
* Enable one or more of the following if probing seems unreliable. * Enable one or more of the following if probing seems unreliable.

11
config/examples/Creality/CR-10S/Configuration_adv.h
View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

3
config/examples/Creality/CR-10_5S/Configuration.h
View File

@ -928,6 +928,9 @@
// Before deploy/stow pause for user confirmation // Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW //#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/** /**
* Enable one or more of the following if probing seems unreliable. * Enable one or more of the following if probing seems unreliable.

11
config/examples/Creality/CR-10_5S/Configuration_adv.h
View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

3
config/examples/Creality/CR-10mini/Configuration.h
View File

@ -946,6 +946,9 @@
// Before deploy/stow pause for user confirmation // Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW //#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/** /**
* Enable one or more of the following if probing seems unreliable. * Enable one or more of the following if probing seems unreliable.

11
config/examples/Creality/CR-10mini/Configuration_adv.h
View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

3
config/examples/Creality/CR-8/Configuration.h
View File

@ -937,6 +937,9 @@
// Before deploy/stow pause for user confirmation // Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW //#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/** /**
* Enable one or more of the following if probing seems unreliable. * Enable one or more of the following if probing seems unreliable.

11
config/examples/Creality/CR-8/Configuration_adv.h
View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

3
config/examples/Creality/Ender-2/Configuration.h
View File

@ -931,6 +931,9 @@
// Before deploy/stow pause for user confirmation // Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW //#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/** /**
* Enable one or more of the following if probing seems unreliable. * Enable one or more of the following if probing seems unreliable.

11
config/examples/Creality/Ender-2/Configuration_adv.h
View File

@ -904,6 +904,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

3
config/examples/Creality/Ender-3/Configuration.h
View File

@ -931,6 +931,9 @@
// Before deploy/stow pause for user confirmation // Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW //#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/** /**
* Enable one or more of the following if probing seems unreliable. * Enable one or more of the following if probing seems unreliable.

11
config/examples/Creality/Ender-3/Configuration_adv.h
View File

@ -904,6 +904,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

3
config/examples/Creality/Ender-4/Configuration.h
View File

@ -937,6 +937,9 @@
// Before deploy/stow pause for user confirmation // Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW //#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/** /**
* Enable one or more of the following if probing seems unreliable. * Enable one or more of the following if probing seems unreliable.

11
config/examples/Creality/Ender-4/Configuration_adv.h
View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

3
config/examples/Einstart-S/Configuration.h
View File

@ -937,6 +937,9 @@
// Before deploy/stow pause for user confirmation // Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW //#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/** /**
* Enable one or more of the following if probing seems unreliable. * Enable one or more of the following if probing seems unreliable.

11
config/examples/Einstart-S/Configuration_adv.h
View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

3
config/examples/Felix/Configuration.h
View File

@ -909,6 +909,9 @@
// Before deploy/stow pause for user confirmation // Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW //#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/** /**
* Enable one or more of the following if probing seems unreliable. * Enable one or more of the following if probing seems unreliable.

11
config/examples/Felix/Configuration_adv.h
View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

3
config/examples/Felix/DUAL/Configuration.h
View File

@ -909,6 +909,9 @@
// Before deploy/stow pause for user confirmation // Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW //#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/** /**
* Enable one or more of the following if probing seems unreliable. * Enable one or more of the following if probing seems unreliable.

3
config/examples/FlashForge/CreatorPro/Configuration.h
View File

@ -919,6 +919,9 @@
// Before deploy/stow pause for user confirmation // Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW //#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/** /**
* Enable one or more of the following if probing seems unreliable. * Enable one or more of the following if probing seems unreliable.

11
config/examples/FlashForge/CreatorPro/Configuration_adv.h
View File

@ -903,6 +903,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

3
config/examples/FolgerTech/i3-2020/Configuration.h
View File

@ -933,6 +933,9 @@
// Before deploy/stow pause for user confirmation // Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW //#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/** /**
* Enable one or more of the following if probing seems unreliable. * Enable one or more of the following if probing seems unreliable.

11
config/examples/FolgerTech/i3-2020/Configuration_adv.h
View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

3
config/examples/Formbot/Raptor/Configuration.h
View File

@ -1008,6 +1008,9 @@
// Before deploy/stow pause for user confirmation // Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW //#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/** /**
* Enable one or more of the following if probing seems unreliable. * Enable one or more of the following if probing seems unreliable.

11
config/examples/Formbot/Raptor/Configuration_adv.h
View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

3
config/examples/Formbot/T_Rex_2+/Configuration.h
View File

@ -957,6 +957,9 @@
// Before deploy/stow pause for user confirmation // Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW //#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/** /**
* Enable one or more of the following if probing seems unreliable. * Enable one or more of the following if probing seems unreliable.

Some files were not shown because too many files have changed in this diff Show More