CMS/Marlin
3
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge pull request #6647 from thinkyhead/bf_pwm_cleanup

Browse Source 
Rename software PWM variables for clarity
This commit is contained in:
Scott Lahteine 2017-05-08 18:53:23 -05:00 committed by GitHub
commit 5402eaf9bd
10 changed files with 153 additions and 173 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Marlin/Conditionals_post.h
View File

@ -649,7 +649,7 @@
/** /**
* Heater & Fan Pausing * Heater & Fan Pausing
*/ */
#if ENABLED(PROBING_FANS_OFF) && FAN_COUNT == 0 #if FAN_COUNT == 0
#undef PROBING_FANS_OFF #undef PROBING_FANS_OFF
#endif #endif
#define QUIET_PROBING (ENABLED(PROBING_HEATERS_OFF) || ENABLED(PROBING_FANS_OFF)) #define QUIET_PROBING (ENABLED(PROBING_HEATERS_OFF) || ENABLED(PROBING_FANS_OFF))

49
Marlin/Marlin_main.cpp
View File

@ -2057,24 +2057,21 @@ static void clean_up_after_endstop_or_probe_move() {
#endif #endif
#if ENABLED(PROBING_FANS_OFF) #if ENABLED(PROBING_FANS_OFF)
void fans_pause(bool p) {
if (p == fans_paused) { // If called out of order something is wrong void fans_pause(const bool p) {
SERIAL_ERROR_START; if (p != fans_paused) {
serialprintPGM(fans_paused ? PSTR("Fans already paused!") : PSTR("Fans already unpaused!")); fans_paused = p;
return; if (p)
for (uint8_t x = 0; x < FAN_COUNT; x++) {
paused_fanSpeeds[x] = fanSpeeds[x];
fanSpeeds[x] = 0;
}
else
for (uint8_t x = 0; x < FAN_COUNT; x++)
fanSpeeds[x] = paused_fanSpeeds[x];
} }
if (p)
for (uint8_t x = 0;x < FAN_COUNT;x++) {
paused_fanSpeeds[x] = fanSpeeds[x];
fanSpeeds[x] = 0;
}
else
for (uint8_t x = 0;x < FAN_COUNT;x++)
fanSpeeds[x] = paused_fanSpeeds[x];
fans_paused = p;
} }
#endif // PROBING_FANS_OFF #endif // PROBING_FANS_OFF
#if HAS_BED_PROBE #if HAS_BED_PROBE
@ -2089,18 +2086,16 @@ static void clean_up_after_endstop_or_probe_move() {
#endif #endif
#if QUIET_PROBING #if QUIET_PROBING
void probing_pause(bool pause) { void probing_pause(const bool p) {
#if ENABLED(PROBING_HEATERS_OFF) #if ENABLED(PROBING_HEATERS_OFF)
thermalManager.pause(pause); thermalManager.pause(p);
#endif #endif
#if ENABLED(PROBING_FANS_OFF) #if ENABLED(PROBING_FANS_OFF)
fans_pause(pause); fans_pause(p);
#endif #endif
if (p) safe_delay(25);
if(pause) safe_delay(25);
} }
#endif #endif // QUIET_PROBING
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
@ -11141,7 +11136,7 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) {
// SERIAL_ECHOPAIR(" seconds=", seconds); // SERIAL_ECHOPAIR(" seconds=", seconds);
// SERIAL_ECHOLNPAIR(" segments=", segments); // SERIAL_ECHOLNPAIR(" segments=", segments);
#if IS_SCARA #if IS_SCARA && ENABLED(SCARA_FEEDRATE_SCALING)
// SCARA needs to scale the feed rate from mm/s to degrees/s // SCARA needs to scale the feed rate from mm/s to degrees/s
const float inv_segment_length = min(10.0, float(segments) / cartesian_mm), // 1/mm/segs const float inv_segment_length = min(10.0, float(segments) / cartesian_mm), // 1/mm/segs
feed_factor = inv_segment_length * _feedrate_mm_s; feed_factor = inv_segment_length * _feedrate_mm_s;
@ -11168,7 +11163,7 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) {
ADJUST_DELTA(logical); // Adjust Z if bed leveling is enabled ADJUST_DELTA(logical); // Adjust Z if bed leveling is enabled
#if IS_SCARA #if IS_SCARA && ENABLED(SCARA_FEEDRATE_SCALING)
// For SCARA scale the feed rate from mm/s to degrees/s // For SCARA scale the feed rate from mm/s to degrees/s
// Use ratio between the length of the move and the larger angle change // Use ratio between the length of the move and the larger angle change
const float adiff = abs(delta[A_AXIS] - oldA), const float adiff = abs(delta[A_AXIS] - oldA),
@ -11184,7 +11179,7 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) {
// Since segment_distance is only approximate, // Since segment_distance is only approximate,
// the final move must be to the exact destination. // the final move must be to the exact destination.
#if IS_SCARA #if IS_SCARA && ENABLED(SCARA_FEEDRATE_SCALING)
// For SCARA scale the feed rate from mm/s to degrees/s // For SCARA scale the feed rate from mm/s to degrees/s
// With segments > 1 length is 1 segment, otherwise total length // With segments > 1 length is 1 segment, otherwise total length
inverse_kinematics(ltarget); inverse_kinematics(ltarget);
@ -11516,7 +11511,7 @@ void prepare_move_to_destination() {
const millis_t ms = millis(); const millis_t ms = millis();
if (ELAPSED(ms, nextMotorCheck)) { if (ELAPSED(ms, nextMotorCheck)) {
nextMotorCheck = ms + 2500UL; // Not a time critical function, so only check every 2.5s nextMotorCheck = ms + 2500UL; // Not a time critical function, so only check every 2.5s
if (X_ENABLE_READ == X_ENABLE_ON || Y_ENABLE_READ == Y_ENABLE_ON || Z_ENABLE_READ == Z_ENABLE_ON || thermalManager.soft_pwm_bed > 0 if (X_ENABLE_READ == X_ENABLE_ON || Y_ENABLE_READ == Y_ENABLE_ON || Z_ENABLE_READ == Z_ENABLE_ON || thermalManager.soft_pwm_amount_bed > 0
|| E0_ENABLE_READ == E_ENABLE_ON // If any of the drivers are enabled... || E0_ENABLE_READ == E_ENABLE_ON // If any of the drivers are enabled...
#if E_STEPPERS > 1 #if E_STEPPERS > 1
|| E1_ENABLE_READ == E_ENABLE_ON || E1_ENABLE_READ == E_ENABLE_ON

1
Marlin/example_configurations/SCARA/Configuration.h
View File

@ -76,6 +76,7 @@
#if ENABLED(MORGAN_SCARA) || ENABLED(MAKERARM_SCARA) #if ENABLED(MORGAN_SCARA) || ENABLED(MAKERARM_SCARA)
//#define DEBUG_SCARA_KINEMATICS //#define DEBUG_SCARA_KINEMATICS
//#define SCARA_FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
// If movement is choppy try lowering this value // If movement is choppy try lowering this value
#define SCARA_SEGMENTS_PER_SECOND 200 #define SCARA_SEGMENTS_PER_SECOND 200

6
Marlin/planner.cpp
View File

@ -491,13 +491,13 @@ void Planner::check_axes_activity() {
#if ENABLED(FAN_SOFT_PWM) #if ENABLED(FAN_SOFT_PWM)
#if HAS_FAN0 #if HAS_FAN0
thermalManager.fanSpeedSoftPwm[0] = CALC_FAN_SPEED(0); thermalManager.soft_pwm_amount_fan[0] = CALC_FAN_SPEED(0);
#endif #endif
#if HAS_FAN1 #if HAS_FAN1
thermalManager.fanSpeedSoftPwm[1] = CALC_FAN_SPEED(1); thermalManager.soft_pwm_amount_fan[1] = CALC_FAN_SPEED(1);
#endif #endif
#if HAS_FAN2 #if HAS_FAN2
thermalManager.fanSpeedSoftPwm[2] = CALC_FAN_SPEED(2); thermalManager.soft_pwm_amount_fan[2] = CALC_FAN_SPEED(2);
#endif #endif
#else #else
#if HAS_FAN0 #if HAS_FAN0

0
platformio.ini → Marlin/platformio.ini
View File

189
Marlin/temperature.cpp
View File

@ -74,12 +74,6 @@ int16_t Temperature::current_temperature_raw[HOTENDS] = { 0 },
float Temperature::redundant_temperature = 0.0; float Temperature::redundant_temperature = 0.0;
#endif #endif
uint8_t Temperature::soft_pwm_bed;
#if ENABLED(FAN_SOFT_PWM)
uint8_t Temperature::fanSpeedSoftPwm[FAN_COUNT];
#endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
#if ENABLED(PID_PARAMS_PER_HOTEND) && HOTENDS > 1 #if ENABLED(PID_PARAMS_PER_HOTEND) && HOTENDS > 1
float Temperature::Kp[HOTENDS] = ARRAY_BY_HOTENDS1(DEFAULT_Kp), float Temperature::Kp[HOTENDS] = ARRAY_BY_HOTENDS1(DEFAULT_Kp),
@ -194,10 +188,12 @@ int16_t Temperature::minttemp_raw[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_RAW_LO_TE
millis_t Temperature::next_auto_fan_check_ms = 0; millis_t Temperature::next_auto_fan_check_ms = 0;
#endif #endif
uint8_t Temperature::soft_pwm[HOTENDS]; uint8_t Temperature::soft_pwm_amount[HOTENDS],
Temperature::soft_pwm_amount_bed;
#if ENABLED(FAN_SOFT_PWM) #if ENABLED(FAN_SOFT_PWM)
uint8_t Temperature::soft_pwm_fan[FAN_COUNT]; uint8_t Temperature::soft_pwm_amount_fan[FAN_COUNT],
Temperature::soft_pwm_count_fan[FAN_COUNT];
#endif #endif
#if ENABLED(FILAMENT_WIDTH_SENSOR) #if ENABLED(FILAMENT_WIDTH_SENSOR)
@ -206,7 +202,7 @@ uint8_t Temperature::soft_pwm[HOTENDS];
#if ENABLED(PROBING_HEATERS_OFF) #if ENABLED(PROBING_HEATERS_OFF)
bool Temperature::paused; bool Temperature::paused;
int16_t Temperature::paused_hotend_temps[HOTENDS]; int16_t Temperature::paused_hotend_temp[HOTENDS];
#if HAS_TEMP_BED #if HAS_TEMP_BED
int16_t Temperature::paused_bed_temp; int16_t Temperature::paused_bed_temp;
#endif #endif
@ -254,13 +250,13 @@ uint8_t Temperature::soft_pwm[HOTENDS];
#if HAS_PID_FOR_BOTH #if HAS_PID_FOR_BOTH
if (hotend < 0) if (hotend < 0)
soft_pwm_bed = bias = d = (MAX_BED_POWER) >> 1; soft_pwm_amount_bed = bias = d = (MAX_BED_POWER) >> 1;
else else
soft_pwm[hotend] = bias = d = (PID_MAX) >> 1; soft_pwm_amount[hotend] = bias = d = (PID_MAX) >> 1;
#elif ENABLED(PIDTEMP) #elif ENABLED(PIDTEMP)
soft_pwm[hotend] = bias = d = (PID_MAX) >> 1; soft_pwm_amount[hotend] = bias = d = (PID_MAX) >> 1;
#else #else
soft_pwm_bed = bias = d = (MAX_BED_POWER) >> 1; soft_pwm_amount_bed = bias = d = (MAX_BED_POWER) >> 1;
#endif #endif
wait_for_heatup = true; wait_for_heatup = true;
@ -298,13 +294,13 @@ uint8_t Temperature::soft_pwm[HOTENDS];
heating = false; heating = false;
#if HAS_PID_FOR_BOTH #if HAS_PID_FOR_BOTH
if (hotend < 0) if (hotend < 0)
soft_pwm_bed = (bias - d) >> 1; soft_pwm_amount_bed = (bias - d) >> 1;
else else
soft_pwm[hotend] = (bias - d) >> 1; soft_pwm_amount[hotend] = (bias - d) >> 1;
#elif ENABLED(PIDTEMP) #elif ENABLED(PIDTEMP)
soft_pwm[hotend] = (bias - d) >> 1; soft_pwm_amount[hotend] = (bias - d) >> 1;
#elif ENABLED(PIDTEMPBED) #elif ENABLED(PIDTEMPBED)
soft_pwm_bed = (bias - d) >> 1; soft_pwm_amount_bed = (bias - d) >> 1;
#endif #endif
t1 = ms; t1 = ms;
t_high = t1 - t2; t_high = t1 - t2;
@ -367,13 +363,13 @@ uint8_t Temperature::soft_pwm[HOTENDS];
} }
#if HAS_PID_FOR_BOTH #if HAS_PID_FOR_BOTH
if (hotend < 0) if (hotend < 0)
soft_pwm_bed = (bias + d) >> 1; soft_pwm_amount_bed = (bias + d) >> 1;
else else
soft_pwm[hotend] = (bias + d) >> 1; soft_pwm_amount[hotend] = (bias + d) >> 1;
#elif ENABLED(PIDTEMP) #elif ENABLED(PIDTEMP)
soft_pwm[hotend] = (bias + d) >> 1; soft_pwm_amount[hotend] = (bias + d) >> 1;
#else #else
soft_pwm_bed = (bias + d) >> 1; soft_pwm_amount_bed = (bias + d) >> 1;
#endif #endif
cycles++; cycles++;
min = temp; min = temp;
@ -466,7 +462,7 @@ void Temperature::updatePID() {
} }
int Temperature::getHeaterPower(int heater) { int Temperature::getHeaterPower(int heater) {
return heater < 0 ? soft_pwm_bed : soft_pwm[heater]; return heater < 0 ? soft_pwm_amount_bed : soft_pwm_amount[heater];
} }
#if HAS_AUTO_FAN #if HAS_AUTO_FAN
@ -717,7 +713,7 @@ void Temperature::manage_heater() {
float pid_output = get_pid_output(e); float pid_output = get_pid_output(e);
// Check if temperature is within the correct range // Check if temperature is within the correct range
soft_pwm[e] = (current_temperature[e] > minttemp[e] || is_preheating(e)) && current_temperature[e] < maxttemp[e] ? (int)pid_output >> 1 : 0; soft_pwm_amount[e] = (current_temperature[e] > minttemp[e] || is_preheating(e)) && current_temperature[e] < maxttemp[e] ? (int)pid_output >> 1 : 0;
// Check if the temperature is failing to increase // Check if the temperature is failing to increase
#if WATCH_HOTENDS #if WATCH_HOTENDS
@ -798,27 +794,27 @@ void Temperature::manage_heater() {
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)
float pid_output = get_pid_output_bed(); float pid_output = get_pid_output_bed();
soft_pwm_bed = WITHIN(current_temperature_bed, BED_MINTEMP, BED_MAXTEMP) ? (int)pid_output >> 1 : 0; soft_pwm_amount_bed = WITHIN(current_temperature_bed, BED_MINTEMP, BED_MAXTEMP) ? (int)pid_output >> 1 : 0;
#elif ENABLED(BED_LIMIT_SWITCHING) #elif ENABLED(BED_LIMIT_SWITCHING)
// Check if temperature is within the correct band // Check if temperature is within the correct band
if (WITHIN(current_temperature_bed, BED_MINTEMP, BED_MAXTEMP)) { if (WITHIN(current_temperature_bed, BED_MINTEMP, BED_MAXTEMP)) {
if (current_temperature_bed >= target_temperature_bed + BED_HYSTERESIS) if (current_temperature_bed >= target_temperature_bed + BED_HYSTERESIS)
soft_pwm_bed = 0; soft_pwm_amount_bed = 0;
else if (current_temperature_bed <= target_temperature_bed - (BED_HYSTERESIS)) else if (current_temperature_bed <= target_temperature_bed - (BED_HYSTERESIS))
soft_pwm_bed = MAX_BED_POWER >> 1; soft_pwm_amount_bed = MAX_BED_POWER >> 1;
} }
else { else {
soft_pwm_bed = 0; soft_pwm_amount_bed = 0;
WRITE_HEATER_BED(LOW); WRITE_HEATER_BED(LOW);
} }
#else // !PIDTEMPBED && !BED_LIMIT_SWITCHING #else // !PIDTEMPBED && !BED_LIMIT_SWITCHING
// Check if temperature is within the correct range // Check if temperature is within the correct range
if (WITHIN(current_temperature_bed, BED_MINTEMP, BED_MAXTEMP)) { if (WITHIN(current_temperature_bed, BED_MINTEMP, BED_MAXTEMP)) {
soft_pwm_bed = current_temperature_bed < target_temperature_bed ? MAX_BED_POWER >> 1 : 0; soft_pwm_amount_bed = current_temperature_bed < target_temperature_bed ? MAX_BED_POWER >> 1 : 0;
} }
else { else {
soft_pwm_bed = 0; soft_pwm_amount_bed = 0;
WRITE_HEATER_BED(LOW); WRITE_HEATER_BED(LOW);
} }
#endif #endif
@ -1205,7 +1201,7 @@ void Temperature::init() {
#if ENABLED(PROBING_HEATERS_OFF) #if ENABLED(PROBING_HEATERS_OFF)
paused = false; paused = false;
ZERO(paused_hotend_temps); ZERO(paused_hotend_temp);
#if HAS_TEMP_BED #if HAS_TEMP_BED
paused_bed_temp = 0; paused_bed_temp = 0;
#endif #endif
@ -1316,7 +1312,7 @@ void Temperature::disable_all_heaters() {
// Unpause and reset everything // Unpause and reset everything
#if ENABLED(PROBING_HEATERS_OFF) #if ENABLED(PROBING_HEATERS_OFF)
paused = false; paused = false;
ZERO(paused_hotend_temps); ZERO(paused_hotend_temp);
#if HAS_TEMP_BED #if HAS_TEMP_BED
paused_bed_temp = 0; paused_bed_temp = 0;
#endif #endif
@ -1327,7 +1323,7 @@ void Temperature::disable_all_heaters() {
#define DISABLE_HEATER(NR) { \ #define DISABLE_HEATER(NR) { \
setTargetHotend(0, NR); \ setTargetHotend(0, NR); \
soft_pwm[NR] = 0; \ soft_pwm_amount[NR] = 0; \
WRITE_HEATER_ ##NR (LOW); \ WRITE_HEATER_ ##NR (LOW); \
} }
@ -1349,7 +1345,7 @@ void Temperature::disable_all_heaters() {
#if HAS_TEMP_BED #if HAS_TEMP_BED
target_temperature_bed = 0; target_temperature_bed = 0;
soft_pwm_bed = 0; soft_pwm_amount_bed = 0;
#if HAS_HEATER_BED #if HAS_HEATER_BED
WRITE_HEATER_BED(LOW); WRITE_HEATER_BED(LOW);
#endif #endif
@ -1357,36 +1353,29 @@ void Temperature::disable_all_heaters() {
} }
#if ENABLED(PROBING_HEATERS_OFF) #if ENABLED(PROBING_HEATERS_OFF)
void Temperature::pause(bool p) {
if (p == paused) { // If called out of order something is wrong
SERIAL_ERROR_START;
serialprintPGM(paused ? PSTR("Heaters already paused!") : PSTR("Heaters already unpaused!"));
return;
}
if (p) { void Temperature::pause(const bool p) {
HOTEND_LOOP() { if (p != paused) {
paused_hotend_temps[e] = degTargetHotend(e); paused = p;
setTargetHotend(0, e); if (p) {
HOTEND_LOOP() {
paused_hotend_temp[e] = degTargetHotend(e);
setTargetHotend(0, e);
}
#if HAS_TEMP_BED
paused_bed_temp = degTargetBed();
setTargetBed(0);
#endif
}
else {
HOTEND_LOOP() setTargetHotend(paused_hotend_temp[e], e);
#if HAS_TEMP_BED
setTargetBed(paused_bed_temp);
#endif
} }
#if HAS_TEMP_BED
paused_bed_temp = degTargetBed();
setTargetBed(0);
#endif
} }
else {
HOTEND_LOOP() setTargetHotend(paused_hotend_temps[e], e);
#if HAS_TEMP_BED
setTargetBed(paused_bed_temp);
#endif
}
paused = p;
} }
bool Temperature::ispaused() {
return paused;
}
#endif // PROBING_HEATERS_OFF #endif // PROBING_HEATERS_OFF
#if ENABLED(HEATER_0_USES_MAX6675) #if ENABLED(HEATER_0_USES_MAX6675)
@ -1613,11 +1602,11 @@ void Temperature::isr() {
#if ENABLED(SLOW_PWM_HEATERS) #if ENABLED(SLOW_PWM_HEATERS)
static uint8_t slow_pwm_count = 0; static uint8_t slow_pwm_count = 0;
#define ISR_STATICS(n) \ #define ISR_STATICS(n) \
static uint8_t soft_pwm_ ## n; \ static uint8_t soft_pwm_count_ ## n, \
static uint8_t state_heater_ ## n = 0; \ state_heater_ ## n = 0, \
static uint8_t state_timer_heater_ ## n = 0 state_timer_heater_ ## n = 0
#else #else
#define ISR_STATICS(n) static uint8_t soft_pwm_ ## n = 0 #define ISR_STATICS(n) static uint8_t soft_pwm_count_ ## n = 0
#endif #endif
// Statics per heater // Statics per heater
@ -1656,73 +1645,73 @@ void Temperature::isr() {
*/ */
if (pwm_count_tmp >= 127) { if (pwm_count_tmp >= 127) {
pwm_count_tmp -= 127; pwm_count_tmp -= 127;
soft_pwm_0 = (soft_pwm_0 & pwm_mask) + soft_pwm[0]; soft_pwm_count_0 = (soft_pwm_count_0 & pwm_mask) + soft_pwm_amount[0];
WRITE_HEATER_0(soft_pwm_0 > pwm_mask ? HIGH : LOW); WRITE_HEATER_0(soft_pwm_count_0 > pwm_mask ? HIGH : LOW);
#if HOTENDS > 1 #if HOTENDS > 1
soft_pwm_1 = (soft_pwm_1 & pwm_mask) + soft_pwm[1]; soft_pwm_count_1 = (soft_pwm_count_1 & pwm_mask) + soft_pwm_amount[1];
WRITE_HEATER_1(soft_pwm_1 > pwm_mask ? HIGH : LOW); WRITE_HEATER_1(soft_pwm_count_1 > pwm_mask ? HIGH : LOW);
#if HOTENDS > 2 #if HOTENDS > 2
soft_pwm_2 = (soft_pwm_2 & pwm_mask) + soft_pwm[2]; soft_pwm_count_2 = (soft_pwm_count_2 & pwm_mask) + soft_pwm_amount[2];
WRITE_HEATER_2(soft_pwm_2 > pwm_mask ? HIGH : LOW); WRITE_HEATER_2(soft_pwm_count_2 > pwm_mask ? HIGH : LOW);
#if HOTENDS > 3 #if HOTENDS > 3
soft_pwm_3 = (soft_pwm_3 & pwm_mask) + soft_pwm[3]; soft_pwm_count_3 = (soft_pwm_count_3 & pwm_mask) + soft_pwm_amount[3];
WRITE_HEATER_3(soft_pwm_3 > pwm_mask ? HIGH : LOW); WRITE_HEATER_3(soft_pwm_count_3 > pwm_mask ? HIGH : LOW);
#if HOTENDS > 4 #if HOTENDS > 4
soft_pwm_4 = (soft_pwm_4 & pwm_mask) + soft_pwm[4]; soft_pwm_count_4 = (soft_pwm_count_4 & pwm_mask) + soft_pwm_amount[4];
WRITE_HEATER_4(soft_pwm_4 > pwm_mask ? HIGH : LOW); WRITE_HEATER_4(soft_pwm_count_4 > pwm_mask ? HIGH : LOW);
#endif // HOTENDS > 4 #endif // HOTENDS > 4
#endif // HOTENDS > 3 #endif // HOTENDS > 3
#endif // HOTENDS > 2 #endif // HOTENDS > 2
#endif // HOTENDS > 1 #endif // HOTENDS > 1
#if HAS_HEATER_BED #if HAS_HEATER_BED
soft_pwm_BED = (soft_pwm_BED & pwm_mask) + soft_pwm_bed; soft_pwm_count_BED = (soft_pwm_count_BED & pwm_mask) + soft_pwm_amount_bed;
WRITE_HEATER_BED(soft_pwm_BED > pwm_mask ? HIGH : LOW); WRITE_HEATER_BED(soft_pwm_count_BED > pwm_mask ? HIGH : LOW);
#endif #endif
#if ENABLED(FAN_SOFT_PWM) #if ENABLED(FAN_SOFT_PWM)
#if HAS_FAN0 #if HAS_FAN0
soft_pwm_fan[0] = (soft_pwm_fan[0] & pwm_mask) + fanSpeedSoftPwm[0] >> 1; soft_pwm_count_fan[0] = (soft_pwm_count_fan[0] & pwm_mask) + soft_pwm_amount_fan[0] >> 1;
WRITE_FAN(soft_pwm_fan[0] > pwm_mask ? HIGH : LOW); WRITE_FAN(soft_pwm_count_fan[0] > pwm_mask ? HIGH : LOW);
#endif #endif
#if HAS_FAN1 #if HAS_FAN1
soft_pwm_fan[1] = (soft_pwm_fan[1] & pwm_mask) + fanSpeedSoftPwm[1] >> 1; soft_pwm_count_fan[1] = (soft_pwm_count_fan[1] & pwm_mask) + soft_pwm_amount_fan[1] >> 1;
WRITE_FAN1(soft_pwm_fan[1] > pwm_mask ? HIGH : LOW); WRITE_FAN1(soft_pwm_count_fan[1] > pwm_mask ? HIGH : LOW);
#endif #endif
#if HAS_FAN2 #if HAS_FAN2
soft_pwm_fan[2] = (soft_pwm_fan[2] & pwm_mask) + fanSpeedSoftPwm[2] >> 1; soft_pwm_count_fan[2] = (soft_pwm_count_fan[2] & pwm_mask) + soft_pwm_amount_fan[2] >> 1;
WRITE_FAN2(soft_pwm_fan[2] > pwm_mask ? HIGH : LOW); WRITE_FAN2(soft_pwm_count_fan[2] > pwm_mask ? HIGH : LOW);
#endif #endif
#endif #endif
} }
else { else {
if (soft_pwm_0 <= pwm_count_tmp) WRITE_HEATER_0(0); if (soft_pwm_count_0 <= pwm_count_tmp) WRITE_HEATER_0(0);
#if HOTENDS > 1 #if HOTENDS > 1
if (soft_pwm_1 <= pwm_count_tmp) WRITE_HEATER_1(0); if (soft_pwm_count_1 <= pwm_count_tmp) WRITE_HEATER_1(0);
#if HOTENDS > 2 #if HOTENDS > 2
if (soft_pwm_2 <= pwm_count_tmp) WRITE_HEATER_2(0); if (soft_pwm_count_2 <= pwm_count_tmp) WRITE_HEATER_2(0);
#if HOTENDS > 3 #if HOTENDS > 3
if (soft_pwm_3 <= pwm_count_tmp) WRITE_HEATER_3(0); if (soft_pwm_count_3 <= pwm_count_tmp) WRITE_HEATER_3(0);
#if HOTENDS > 4 #if HOTENDS > 4
if (soft_pwm_4 <= pwm_count_tmp) WRITE_HEATER_4(0); if (soft_pwm_count_4 <= pwm_count_tmp) WRITE_HEATER_4(0);
#endif // HOTENDS > 4 #endif // HOTENDS > 4
#endif // HOTENDS > 3 #endif // HOTENDS > 3
#endif // HOTENDS > 2 #endif // HOTENDS > 2
#endif // HOTENDS > 1 #endif // HOTENDS > 1
#if HAS_HEATER_BED #if HAS_HEATER_BED
if (soft_pwm_BED <= pwm_count_tmp) WRITE_HEATER_BED(0); if (soft_pwm_count_BED <= pwm_count_tmp) WRITE_HEATER_BED(0);
#endif #endif
#if ENABLED(FAN_SOFT_PWM) #if ENABLED(FAN_SOFT_PWM)
#if HAS_FAN0 #if HAS_FAN0
if (soft_pwm_fan[0] <= pwm_count_tmp) WRITE_FAN(0); if (soft_pwm_count_fan[0] <= pwm_count_tmp) WRITE_FAN(0);
#endif #endif
#if HAS_FAN1 #if HAS_FAN1
if (soft_pwm_fan[1] <= pwm_count_tmp) WRITE_FAN1(0); if (soft_pwm_count_fan[1] <= pwm_count_tmp) WRITE_FAN1(0);
#endif #endif
#if HAS_FAN2 #if HAS_FAN2
if (soft_pwm_fan[2] <= pwm_count_tmp) WRITE_FAN2(0); if (soft_pwm_count_fan[2] <= pwm_count_tmp) WRITE_FAN2(0);
#endif #endif
#endif #endif
} }
@ -1765,7 +1754,7 @@ void Temperature::isr() {
WRITE_HEATER_ ##NR(0); \ WRITE_HEATER_ ##NR(0); \
} \ } \
} }
#define SLOW_PWM_ROUTINE(n) _SLOW_PWM_ROUTINE(n, soft_pwm[n]) #define SLOW_PWM_ROUTINE(n) _SLOW_PWM_ROUTINE(n, soft_pwm_amount[n])
#define PWM_OFF_ROUTINE(NR) \ #define PWM_OFF_ROUTINE(NR) \
if (soft_pwm_ ##NR < slow_pwm_count) { \ if (soft_pwm_ ##NR < slow_pwm_count) { \
@ -1792,7 +1781,7 @@ void Temperature::isr() {
#endif // HOTENDS > 2 #endif // HOTENDS > 2
#endif // HOTENDS > 1 #endif // HOTENDS > 1
#if HAS_HEATER_BED #if HAS_HEATER_BED
_SLOW_PWM_ROUTINE(BED, soft_pwm_bed); // BED _SLOW_PWM_ROUTINE(BED, soft_pwm_amount_bed); // BED
#endif #endif
} // slow_pwm_count == 0 } // slow_pwm_count == 0
@ -1818,26 +1807,26 @@ void Temperature::isr() {
if (pwm_count_tmp >= 127) { if (pwm_count_tmp >= 127) {
pwm_count_tmp = 0; pwm_count_tmp = 0;
#if HAS_FAN0 #if HAS_FAN0
soft_pwm_fan[0] = fanSpeedSoftPwm[0] >> 1; soft_pwm_count_fan[0] = soft_pwm_amount_fan[0] >> 1;
WRITE_FAN(soft_pwm_fan[0] > 0 ? HIGH : LOW); WRITE_FAN(soft_pwm_count_fan[0] > 0 ? HIGH : LOW);
#endif #endif
#if HAS_FAN1 #if HAS_FAN1
soft_pwm_fan[1] = fanSpeedSoftPwm[1] >> 1; soft_pwm_count_fan[1] = soft_pwm_amount_fan[1] >> 1;
WRITE_FAN1(soft_pwm_fan[1] > 0 ? HIGH : LOW); WRITE_FAN1(soft_pwm_count_fan[1] > 0 ? HIGH : LOW);
#endif #endif
#if HAS_FAN2 #if HAS_FAN2
soft_pwm_fan[2] = fanSpeedSoftPwm[2] >> 1; soft_pwm_count_fan[2] = soft_pwm_amount_fan[2] >> 1;
WRITE_FAN2(soft_pwm_fan[2] > 0 ? HIGH : LOW); WRITE_FAN2(soft_pwm_count_fan[2] > 0 ? HIGH : LOW);
#endif #endif
} }
#if HAS_FAN0 #if HAS_FAN0
if (soft_pwm_fan[0] <= pwm_count_tmp) WRITE_FAN(0); if (soft_pwm_count_fan[0] <= pwm_count_tmp) WRITE_FAN(0);
#endif #endif
#if HAS_FAN1 #if HAS_FAN1
if (soft_pwm_fan[1] <= pwm_count_tmp) WRITE_FAN1(0); if (soft_pwm_count_fan[1] <= pwm_count_tmp) WRITE_FAN1(0);
#endif #endif
#if HAS_FAN2 #if HAS_FAN2
if (soft_pwm_fan[2] <= pwm_count_tmp) WRITE_FAN2(0); if (soft_pwm_count_fan[2] <= pwm_count_tmp) WRITE_FAN2(0);
#endif #endif
#endif // FAN_SOFT_PWM #endif // FAN_SOFT_PWM

17
Marlin/temperature.h
View File

@ -109,10 +109,12 @@ class Temperature {
static float redundant_temperature; static float redundant_temperature;
#endif #endif
static uint8_t soft_pwm_bed; static uint8_t soft_pwm_amount[HOTENDS],
soft_pwm_amount_bed;
#if ENABLED(FAN_SOFT_PWM) #if ENABLED(FAN_SOFT_PWM)
static uint8_t fanSpeedSoftPwm[FAN_COUNT]; static uint8_t soft_pwm_amount_fan[FAN_COUNT],
soft_pwm_count_fan[FAN_COUNT];
#endif #endif
#if ENABLED(PIDTEMP) || ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMP) || ENABLED(PIDTEMPBED)
@ -249,19 +251,13 @@ class Temperature {
static millis_t next_auto_fan_check_ms; static millis_t next_auto_fan_check_ms;
#endif #endif
static uint8_t soft_pwm[HOTENDS];
#if ENABLED(FAN_SOFT_PWM)
static uint8_t soft_pwm_fan[FAN_COUNT];
#endif
#if ENABLED(FILAMENT_WIDTH_SENSOR) #if ENABLED(FILAMENT_WIDTH_SENSOR)
static int current_raw_filwidth; //Holds measured filament diameter - one extruder only static int current_raw_filwidth; //Holds measured filament diameter - one extruder only
#endif #endif
#if ENABLED(PROBING_HEATERS_OFF) #if ENABLED(PROBING_HEATERS_OFF)
static bool paused; static bool paused;
static int16_t paused_hotend_temps[HOTENDS]; static int16_t paused_hotend_temp[HOTENDS];
#if HAS_TEMP_BED #if HAS_TEMP_BED
static int16_t paused_bed_temp; static int16_t paused_bed_temp;
@ -462,8 +458,7 @@ class Temperature {
#endif // BABYSTEPPING #endif // BABYSTEPPING
#if ENABLED(PROBING_HEATERS_OFF) #if ENABLED(PROBING_HEATERS_OFF)
static void pause(bool p); static void pause(const bool p);
static bool ispaused();
#endif #endif
private: private:

58
README.md
View File

@ -113,37 +113,37 @@ Proposed patches should be submitted as a Pull Request against this branch ([bug
## Credits ## Credits
The current Marlin dev team consists of: The current Marlin dev team consists of:
- Roxanne Neufeld [@Roxy-3D] - English - Roxanne Neufeld [[@Roxy-3D](https://github.com/Roxy-3D)] - English
- Scott Lahteine [@thinkyhead] - English - Scott Lahteine [[@thinkyhead](https://github.com/thinkyhead)] - English
- Bob Kuhn [@Bob-the-Kuhn] - English - Bob Kuhn [[@Bob-the-Kuhn](https://github.com/Bob-the-Kuhn)] - English
- Andreas Hardtung [@AnHardt] - Deutsch, English - Andreas Hardtung [[@AnHardt](https://github.com/AnHardt)] - Deutsch, English
- Nico Tonnhofer [@Wurstnase] - Deutsch, English - Nico Tonnhofer [[@Wurstnase](https://github.com/Wurstnase)] - Deutsch, English
- Jochen Groppe [@CONSULitAS] - Deutsch, English - Jochen Groppe [[@CONSULitAS](https://github.com/CONSULitAS)] - Deutsch, English
- João Brazio [@jbrazio] - Portuguese, English - João Brazio [[@jbrazio](https://github.com/jbrazio)] - Portuguese, English
- Bo Hermannsen [@boelle] - Danish, English - Bo Hermannsen [[@boelle](https://github.com/boelle)] - Danish, English
- Bob Cousins [@bobc] - English - Bob Cousins [[@bobc](https://github.com/bobc)] - English
- [@maverikou] - [[@maverikou](https://github.com/maverikou)]
- Chris Palmer [@nophead] - Chris Palmer [[@nophead](https://github.com/nophead)]
- [@paclema] - [[@paclema](https://github.com/paclema)]
- Erik van der Zalm [@ErikZalm] - Erik van der Zalm [[@ErikZalm](https://github.com/ErikZalm)]
- David Braam [@daid] - David Braam [[@daid](https://github.com/daid)]
- Bernhard Kubicek [@bkubicek] - Bernhard Kubicek [[@bkubicek](https://github.com/bkubicek)]
More features have been added by: More features have been added by:
- Alberto Cotronei [@MagoKimbra] - English, Italian - Alberto Cotronei [[@MagoKimbra](https://github.com/MagoKimbra)] - English, Italian
- Thomas Moore [@tcm0116] - Thomas Moore [[@tcm0116](https://github.com/tcm0116)]
- Ernesto Martinez [@emartinez167] - Ernesto Martinez [[@emartinez167](https://github.com/emartinez167)]
- Petr Zahradnik [@clexpert] - Petr Zahradnik [[@clexpert](https://github.com/clexpert)]
- Kai [@Kaibob2] - Kai [[@Kaibob2](https://github.com/Kaibob2)]
- Edward Patel [@epatel] - Edward Patel [[@epatel](https://github.com/epatel)]
- F. Malpartida [@fmalpartida] - English, Spanish - F. Malpartida [[@fmalpartida](https://github.com/fmalpartida)] - English, Spanish
- [@esenapaj] - English, Japanese - [[@esenapaj](https://github.com/esenapaj)] - English, Japanese
- [@benlye] - [[@benlye](https://github.com/benlye)]
- [@Tannoo] - [[@Tannoo](https://github.com/Tannoo)]
- [@teemuatlut] - [[@teemuatlut](https://github.com/teemuatlut)]
- [@bgort] - [[@bgort](https://github.com/bgort)]
- [@LVD-AC] - [[@LVD-AC](https://github.com/LVD-AC)]
- [@paulusjacobus] - [[@paulusjacobus](https://github.com/paulusjacobus)]
- ...and many others - ...and many others
## License ## License