From 5441ee5a7a9882bff66d1ceeceaebb72b5100733 Mon Sep 17 00:00:00 2001 From: Samantaz Fox Date: Fri, 9 Oct 2020 01:40:54 +0200 Subject: [PATCH] Fix and improve Makefile / CMake (#19640) --- Marlin/Makefile | 167 +++++++++++++++++++++------ buildroot/share/cmake/CMakeLists.txt | 8 +- 2 files changed, 133 insertions(+), 42 deletions(-) diff --git a/Marlin/Makefile b/Marlin/Makefile index 68dd05bdf..91c8889c6 100644 --- a/Marlin/Makefile +++ b/Marlin/Makefile @@ -22,8 +22,10 @@ # (e.g. UPLOAD_PORT = /dev/tty.USB0). If the exact name of this file # changes, you can use * as a wild card (e.g. UPLOAD_PORT = /dev/tty.usb*). # -# 3. Set the line containing "MCU" to match your board's processor. -# Older one's are atmega8 based, newer ones like Arduino Mini, Bluetooth +# 3. Set the line containing "MCU" to match your board's processor. Set +# "PROG_MCU" as the AVR part name corresponding to "MCU". You can use the +# following command to get a list of correspondences: `avrdude -c alf -p x` +# Older boards are atmega8 based, newer ones like Arduino Mini, Bluetooth # or Diecimila have the atmega168. If you're using a LilyPad Arduino, # change F_CPU to 8000000. If you are using Gen7 electronics, you # probably need to use 20000000. Either way, you must regenerate @@ -34,18 +36,18 @@ # 5. Type "make upload", reset your Arduino board, and press enter to # upload your program to the Arduino board. # -# Note that all settings at the top of this file can be overriden from +# Note that all settings at the top of this file can be overridden from # the command line with, for example, "make HARDWARE_MOTHERBOARD=71" # # To compile for RAMPS (atmega2560) with Arduino 1.6.9 at root/arduino you would use... # # make ARDUINO_VERSION=10609 AVR_TOOLS_PATH=/root/arduino/hardware/tools/avr/bin/ \ -# HARDWARE_MOTHERBOARD=33 ARDUINO_INSTALL_DIR=/root/arduino +# HARDWARE_MOTHERBOARD=1200 ARDUINO_INSTALL_DIR=/root/arduino # # To compile and upload simply add "upload" to the end of the line... # # make ARDUINO_VERSION=10609 AVR_TOOLS_PATH=/root/arduino/hardware/tools/avr/bin/ \ -# HARDWARE_MOTHERBOARD=33 ARDUINO_INSTALL_DIR=/root/arduino upload +# HARDWARE_MOTHERBOARD=1200 ARDUINO_INSTALL_DIR=/root/arduino upload # # If uploading doesn't work try adding the parameter "AVRDUDE_PROGRAMMER=wiring" or # start upload manually (using stk500) like so: @@ -57,7 +59,26 @@ # # This defines the board to compile for (see boards.h for your board's ID) -HARDWARE_MOTHERBOARD ?= 11 +HARDWARE_MOTHERBOARD ?= 1020 + +ifeq ($(OS),Windows_NT) + # Windows + ARDUINO_INSTALL_DIR ?= ${HOME}/Arduino + ARDUINO_USER_DIR ?= ${HOME}/Arduino +else + UNAME_S := $(shell uname -s) + ifeq ($(UNAME_S),Linux) + # Linux + ARDUINO_INSTALL_DIR ?= /usr/share/arduino + ARDUINO_USER_DIR ?= ${HOME}/Arduino + endif + ifeq ($(UNAME_S),Darwin) + # Darwin (macOS) + ARDUINO_INSTALL_DIR ?= /Applications/Arduino.app/Contents/Java + ARDUINO_USER_DIR ?= ${HOME}/Documents/Arduino + AVR_TOOLS_PATH ?= /Applications/Arduino.app/Contents/Java/hardware/tools/avr/bin/ + endif +endif # Arduino source install directory, and version number # On most linuxes this will be /usr/share/arduino @@ -67,32 +88,38 @@ ARDUINO_VERSION ?= 106 # The installed Libraries are in the User folder ARDUINO_USER_DIR ?= ${HOME}/Arduino -# You can optionally set a path to the avr-gcc tools. Requires a trailing slash. (ex: /usr/local/avr-gcc/bin) +# You can optionally set a path to the avr-gcc tools. +# Requires a trailing slash. For example, /usr/local/avr-gcc/bin/ AVR_TOOLS_PATH ?= -#Programmer configuration +# Programmer configuration UPLOAD_RATE ?= 57600 AVRDUDE_PROGRAMMER ?= arduino -# on most linuxes this will be /dev/ttyACM0 or /dev/ttyACM1 +# On most linuxes this will be /dev/ttyACM0 or /dev/ttyACM1 UPLOAD_PORT ?= /dev/ttyUSB0 -#Directory used to build files in, contains all the build files, from object files to the final hex file -#on linux it is best to put an absolute path like /home/username/tmp . +# Directory used to build files in, contains all the build files, from object +# files to the final hex file on linux it is best to put an absolute path +# like /home/username/tmp . BUILD_DIR ?= applet # This defines whether Liquid_TWI2 support will be built LIQUID_TWI2 ?= 0 -# this defines if Wire is needed +# This defines if Wire is needed WIRE ?= 0 -# this defines if U8GLIB is needed (may require RELOC_WORKAROUND) -U8GLIB ?= 1 +# This defines if Tone is needed (i.e SPEAKER is defined in Configuration.h) +# Disabling this (and SPEAKER) saves approximatively 350 bytes of memory. +TONE ?= 1 -# this defines whether to include the Trinamic TMCStepper library -TMC ?= 1 +# This defines if U8GLIB is needed (may require RELOC_WORKAROUND) +U8GLIB ?= 0 -# this defines whether to include the AdaFruit NeoPixel library +# This defines whether to include the Trinamic TMCStepper library +TMC ?= 0 + +# This defines whether to include the AdaFruit NeoPixel library NEOPIXEL ?= 0 ############ @@ -208,7 +235,8 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1119) else ifeq ($(HARDWARE_MOTHERBOARD),1120) # Ultimaker (Older electronics. Pre 1.5.4. This is rare) else ifeq ($(HARDWARE_MOTHERBOARD),1121) - MCU ?= atmega1280 + MCU ?= atmega1280 + PROG_MCU ?= m1280 # Azteeg X3 else ifeq ($(HARDWARE_MOTHERBOARD),1122) @@ -350,9 +378,11 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1320) # Minitronics v1.0/1.1 else ifeq ($(HARDWARE_MOTHERBOARD),1400) MCU ?= atmega1281 + PROG_MCU ?= m1281 # Silvergate v1.0 else ifeq ($(HARDWARE_MOTHERBOARD),1401) MCU ?= atmega1281 + PROG_MCU ?= m1281 # # Sanguinololu and Derivatives - ATmega644P, ATmega1284P @@ -362,46 +392,57 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1401) else ifeq ($(HARDWARE_MOTHERBOARD),1500) HARDWARE_VARIANT ?= Sanguino MCU ?= atmega644p + PROG_MCU ?= m644p # Sanguinololu 1.2 and above else ifeq ($(HARDWARE_MOTHERBOARD),1501) HARDWARE_VARIANT ?= Sanguino MCU ?= atmega644p + PROG_MCU ?= m644p # Melzi else ifeq ($(HARDWARE_MOTHERBOARD),1502) HARDWARE_VARIANT ?= Sanguino MCU ?= atmega644p + PROG_MCU ?= m644p # Melzi V2.0 else ifeq ($(HARDWARE_MOTHERBOARD),1503) HARDWARE_VARIANT ?= Sanguino MCU ?= atmega1284p + PROG_MCU ?= m1284p # Melzi with ATmega1284 (MaKr3d version) else ifeq ($(HARDWARE_MOTHERBOARD),1504) HARDWARE_VARIANT ?= Sanguino MCU ?= atmega1284p + PROG_MCU ?= m1284p # Melzi Creality3D board (for CR-10 etc) else ifeq ($(HARDWARE_MOTHERBOARD),1505) HARDWARE_VARIANT ?= Sanguino MCU ?= atmega1284p + PROG_MCU ?= m1284p # Melzi Malyan M150 board else ifeq ($(HARDWARE_MOTHERBOARD),1506) HARDWARE_VARIANT ?= Sanguino MCU ?= atmega1284p + PROG_MCU ?= m1284p # Tronxy X5S else ifeq ($(HARDWARE_MOTHERBOARD),1507) HARDWARE_VARIANT ?= Sanguino MCU ?= atmega1284p + PROG_MCU ?= m1284p # STB V1.1 else ifeq ($(HARDWARE_MOTHERBOARD),1508) HARDWARE_VARIANT ?= Sanguino MCU ?= atmega1284p + PROG_MCU ?= m1284p # Azteeg X1 else ifeq ($(HARDWARE_MOTHERBOARD),1509) HARDWARE_VARIANT ?= Sanguino MCU ?= atmega1284p + PROG_MCU ?= m1284p # Anet 1.0 (Melzi clone) else ifeq ($(HARDWARE_MOTHERBOARD),1510) HARDWARE_VARIANT ?= Sanguino MCU ?= atmega1284p + PROG_MCU ?= m1284p # # Other ATmega644P, ATmega644, ATmega1284P @@ -411,50 +452,61 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1510) else ifeq ($(HARDWARE_MOTHERBOARD),1600) HARDWARE_VARIANT ?= Sanguino MCU ?= atmega644p + PROG_MCU ?= m644p # Gen3+ else ifeq ($(HARDWARE_MOTHERBOARD),1601) HARDWARE_VARIANT ?= Sanguino MCU ?= atmega644p + PROG_MCU ?= m644p # Gen6 else ifeq ($(HARDWARE_MOTHERBOARD),1602) HARDWARE_VARIANT ?= Gen6 MCU ?= atmega644p + PROG_MCU ?= m644p # Gen6 deluxe else ifeq ($(HARDWARE_MOTHERBOARD),1603) HARDWARE_VARIANT ?= Gen6 MCU ?= atmega644p + PROG_MCU ?= m644p # Gen7 custom (Alfons3 Version) else ifeq ($(HARDWARE_MOTHERBOARD),1604) HARDWARE_VARIANT ?= Gen7 MCU ?= atmega644 + PROG_MCU ?= m644 F_CPU ?= 20000000 # Gen7 v1.1, v1.2 else ifeq ($(HARDWARE_MOTHERBOARD),1605) HARDWARE_VARIANT ?= Gen7 MCU ?= atmega644p + PROG_MCU ?= m644p F_CPU ?= 20000000 # Gen7 v1.3 else ifeq ($(HARDWARE_MOTHERBOARD),1606) HARDWARE_VARIANT ?= Gen7 MCU ?= atmega644p + PROG_MCU ?= m644p F_CPU ?= 20000000 # Gen7 v1.4 else ifeq ($(HARDWARE_MOTHERBOARD),1607) HARDWARE_VARIANT ?= Gen7 MCU ?= atmega1284p + PROG_MCU ?= m1284p F_CPU ?= 20000000 # Alpha OMCA board else ifeq ($(HARDWARE_MOTHERBOARD),1608) HARDWARE_VARIANT ?= SanguinoA MCU ?= atmega644 + PROG_MCU ?= m644 # Final OMCA board else ifeq ($(HARDWARE_MOTHERBOARD),1609) HARDWARE_VARIANT ?= Sanguino MCU ?= atmega644p + PROG_MCU ?= m644p # Sethi 3D_1 else ifeq ($(HARDWARE_MOTHERBOARD),1610) HARDWARE_VARIANT ?= Sanguino MCU ?= atmega644p + PROG_MCU ?= m644p # # Teensyduino - AT90USB1286, AT90USB1286P @@ -464,51 +516,60 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1610) else ifeq ($(HARDWARE_MOTHERBOARD),1700) HARDWARE_VARIANT ?= Teensy MCU ?= at90usb1286 + PROG_MCU ?= usb1286 # Printrboard (AT90USB1286) else ifeq ($(HARDWARE_MOTHERBOARD),1701) HARDWARE_VARIANT ?= Teensy MCU ?= at90usb1286 + PROG_MCU ?= usb1286 # Printrboard Revision F (AT90USB1286) else ifeq ($(HARDWARE_MOTHERBOARD),1702) HARDWARE_VARIANT ?= Teensy MCU ?= at90usb1286 + PROG_MCU ?= usb1286 # Brainwave (AT90USB646) else ifeq ($(HARDWARE_MOTHERBOARD),1703) HARDWARE_VARIANT ?= Teensy MCU ?= at90usb646 + PROG_MCU ?= usb646 # Brainwave Pro (AT90USB1286) else ifeq ($(HARDWARE_MOTHERBOARD),1704) HARDWARE_VARIANT ?= Teensy MCU ?= at90usb1286 + PROG_MCU ?= usb1286 # SAV Mk-I (AT90USB1286) else ifeq ($(HARDWARE_MOTHERBOARD),1705) HARDWARE_VARIANT ?= Teensy MCU ?= at90usb1286 + PROG_MCU ?= usb1286 # Teensy++2.0 (AT90USB1286) else ifeq ($(HARDWARE_MOTHERBOARD),1706) HARDWARE_VARIANT ?= Teensy MCU ?= at90usb1286 + PROG_MCU ?= usb1286 # 5DPrint D8 Driver Board else ifeq ($(HARDWARE_MOTHERBOARD),1707) HARDWARE_VARIANT ?= Teensy MCU ?= at90usb1286 + PROG_MCU ?= usb1286 # UltiMachine Archim1 (with DRV8825 drivers) else ifeq ($(HARDWARE_MOTHERBOARD),3023) HARDWARE_VARIANT ?= archim MCPU = cortex-m3 - F_CPU = 84000000L + F_CPU = 84000000 IS_MCU = 0 # UltiMachine Archim2 (with TMC2130 drivers) else ifeq ($(HARDWARE_MOTHERBOARD),3024) HARDWARE_VARIANT ?= archim MCPU = cortex-m3 - F_CPU = 84000000L + F_CPU = 84000000 IS_MCU = 0 endif # Be sure to regenerate speed_lookuptable.h with create_speed_lookuptable.py # if you are setting this to something other than 16MHz +# Do not put the UL suffix, it's done later on. # Set to 16Mhz if not yet set. F_CPU ?= 16000000 @@ -518,7 +579,8 @@ IS_MCU ?= 1 ifeq ($(IS_MCU),1) # Set to arduino, ATmega2560 if not yet set. HARDWARE_VARIANT ?= arduino - MCU ?= atmega2560 + MCU ?= atmega2560 + PROG_MCU ?= m2560 TOOL_PREFIX = avr MCU_FLAGS = -mmcu=$(MCU) @@ -549,27 +611,36 @@ VPATH += $(BUILD_DIR) VPATH += $(HARDWARE_SRC) ifeq ($(HARDWARE_VARIANT), $(filter $(HARDWARE_VARIANT),arduino Teensy Sanguino)) -VPATH += $(ARDUINO_INSTALL_DIR)/hardware/marlin/avr/libraries/LiquidCrystal/src -VPATH += $(ARDUINO_INSTALL_DIR)/hardware/marlin/avr/libraries/SPI + # Old libraries (avr-core 1.6.21 < / Arduino < 1.6.8) + VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI + # New libraries (avr-core >= 1.6.21 / Arduino >= 1.6.8) + VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI/src endif ifeq ($(IS_MCU),1) VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/cores/arduino + # Old libraries (avr-core 1.6.21 < / Arduino < 1.6.8) VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI + VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SoftwareSerial + # New libraries (avr-core >= 1.6.21 / Arduino >= 1.6.8) VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI/src VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SoftwareSerial/src endif VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidCrystal/src + ifeq ($(LIQUID_TWI2), 1) -VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire -VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire/utility -VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidTWI2 + WIRE = 1 + VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidTWI2 endif ifeq ($(WIRE), 1) -VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire -VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire/utility + # Old libraries (avr-core 1.6.21 / Arduino < 1.6.8) + VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire + VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire/utility + # New libraries (avr-core >= 1.6.21 / Arduino >= 1.6.8) + VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire/src + VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire/src/utility endif ifeq ($(NEOPIXEL), 1) VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Adafruit_NeoPixel @@ -641,13 +712,23 @@ ifeq ($(WIRE), 1) LIB_CXXSRC += Wire.cpp endif +ifeq ($(TONE), 1) + LIB_CXXSRC += Tone.cpp +endif + ifeq ($(U8GLIB), 1) LIB_CXXSRC += U8glib.cpp - LIB_SRC += u8g_ll_api.c u8g_bitmap.c u8g_clip.c u8g_com_null.c u8g_delay.c u8g_page.c u8g_pb.c u8g_pb16h1.c u8g_rect.c u8g_state.c u8g_font.c u8g_font_6x13.c u8g_font_04b_03.c u8g_font_5x8.c + LIB_SRC += u8g_ll_api.c u8g_bitmap.c u8g_clip.c u8g_com_null.c u8g_delay.c \ + u8g_page.c u8g_pb.c u8g_pb16h1.c u8g_rect.c u8g_state.c u8g_font.c \ + u8g_font_6x13.c u8g_font_04b_03.c u8g_font_5x8.c endif ifeq ($(TMC), 1) - LIB_CXXSRC += TMCStepper.cpp COOLCONF.cpp DRV_STATUS.cpp IHOLD_IRUN.cpp CHOPCONF.cpp GCONF.cpp PWMCONF.cpp DRV_CONF.cpp DRVCONF.cpp DRVCTRL.cpp DRVSTATUS.cpp ENCMODE.cpp RAMP_STAT.cpp SGCSCONF.cpp SHORT_CONF.cpp SMARTEN.cpp SW_MODE.cpp SW_SPI.cpp TMC2130Stepper.cpp TMC2208Stepper.cpp TMC2209Stepper.cpp TMC2660Stepper.cpp TMC5130Stepper.cpp TMC5160Stepper.cpp + LIB_CXXSRC += TMCStepper.cpp COOLCONF.cpp DRV_STATUS.cpp IHOLD_IRUN.cpp \ + CHOPCONF.cpp GCONF.cpp PWMCONF.cpp DRV_CONF.cpp DRVCONF.cpp DRVCTRL.cpp \ + DRVSTATUS.cpp ENCMODE.cpp RAMP_STAT.cpp SGCSCONF.cpp SHORT_CONF.cpp \ + SMARTEN.cpp SW_MODE.cpp SW_SPI.cpp TMC2130Stepper.cpp TMC2208Stepper.cpp \ + TMC2209Stepper.cpp TMC2660Stepper.cpp TMC5130Stepper.cpp TMC5160Stepper.cpp endif ifeq ($(RELOC_WORKAROUND), 1) @@ -689,17 +770,23 @@ REMOVE = rm -f MV = mv -f # Place -D or -U options here -CDEFS = -DF_CPU=$(F_CPU) ${addprefix -D , $(DEFINES)} -DARDUINO=$(ARDUINO_VERSION) +CDEFS = -DF_CPU=$(F_CPU)UL ${addprefix -D , $(DEFINES)} -DARDUINO=$(ARDUINO_VERSION) CXXDEFS = $(CDEFS) ifeq ($(HARDWARE_VARIANT), Teensy) - CDEFS += -DUSB_SERIAL + CDEFS += -DUSB_SERIAL LIB_SRC += usb.c pins_teensy.c LIB_CXXSRC += usb_api.cpp else ifeq ($(HARDWARE_VARIANT), archim) - CDEFS += -DARDUINO_SAM_ARCHIM -DARDUINO_ARCH_SAM -D__SAM3X8E__ -DUSB_VID=0x27b1 -DUSB_PID=0x0001 -DUSBCON '-DUSB_MANUFACTURER="UltiMachine"' '-DUSB_PRODUCT_STRING="Archim"' - LIB_CXXSRC += variant.cpp IPAddress.cpp Reset.cpp RingBuffer.cpp Stream.cpp UARTClass.cpp USARTClass.cpp abi.cpp new.cpp watchdog.cpp CDC.cpp PluggableUSB.cpp USBCore.cpp + CDEFS += -DARDUINO_SAM_ARCHIM -DARDUINO_ARCH_SAM -D__SAM3X8E__ + CDEFS += -DUSB_VID=0x27b1 -DUSB_PID=0x0001 -DUSBCON + CDEFS += '-DUSB_MANUFACTURER="UltiMachine"' '-DUSB_PRODUCT_STRING="Archim"' + + LIB_CXXSRC += variant.cpp IPAddress.cpp Reset.cpp RingBuffer.cpp Stream.cpp \ + UARTClass.cpp USARTClass.cpp abi.cpp new.cpp watchdog.cpp CDC.cpp \ + PluggableUSB.cpp USBCore.cpp + LIB_SRC += cortex_handlers.c iar_calls_sam3.c syscalls_sam3.c dtostrf.c itoa.c ifeq ($(U8GLIB), 1) @@ -725,16 +812,20 @@ CTUNING = -fsigned-char -funsigned-bitfields -fno-exceptions \ ifneq ($(HARDWARE_MOTHERBOARD),) CTUNING += -DMOTHERBOARD=${HARDWARE_MOTHERBOARD} endif + #CEXTRA = -Wa,-adhlns=$(<:.c=.lst) CXXEXTRA = -fno-use-cxa-atexit -fno-threadsafe-statics -fno-rtti CFLAGS := $(CDEBUG) $(CDEFS) $(CINCS) -O$(OPT) $(CEXTRA) $(CTUNING) $(CSTANDARD) CXXFLAGS := $(CDEFS) $(CINCS) -O$(OPT) $(CXXEXTRA) $(CTUNING) $(CXXSTANDARD) ASFLAGS := $(CDEFS) #ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs + ifeq ($(HARDWARE_VARIANT), archim) LD_PREFIX = -Wl,--gc-sections,-Map,Marlin.ino.map,--cref,--check-sections,--entry=Reset_Handler,--unresolved-symbols=report-all,--warn-common,--warn-section-align LD_SUFFIX = $(LDLIBS) - LDFLAGS = -lm -T$(LDSCRIPT) -u _sbrk -u link -u _close -u _fstat -u _isatty -u _lseek -u _read -u _write -u _exit -u kill -u _getpid + + LDFLAGS = -lm -T$(LDSCRIPT) -u _sbrk -u link -u _close -u _fstat -u _isatty + LDFLAGS += -u _lseek -u _read -u _write -u _exit -u kill -u _getpid else LD_PREFIX = -Wl,--gc-sections,--relax LDFLAGS = -lm @@ -750,7 +841,7 @@ else AVRDUDE_CONF = $(ARDUINO_INSTALL_DIR)/hardware/tools/avr/etc/avrdude.conf endif AVRDUDE_FLAGS = -D -C$(AVRDUDE_CONF) \ - -p$(MCU) -P$(AVRDUDE_PORT) -c$(AVRDUDE_PROGRAMMER) \ + -p$(PROG_MCU) -P$(AVRDUDE_PORT) -c$(AVRDUDE_PROGRAMMER) \ -b$(UPLOAD_RATE) # Since Marlin 2.0, the source files may be distributed into several @@ -851,7 +942,7 @@ extcoff: $(TARGET).elf .elf.eep: -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ - --change-section-lma .eeprom=0 -O $(FORMAT) $< $@ + --change-section-lma .eeprom=0 -O $(FORMAT) $< $@ # Create extended listing file from ELF output file. .elf.lss: @@ -865,7 +956,7 @@ extcoff: $(TARGET).elf $(BUILD_DIR)/$(TARGET).elf: $(OBJ) Configuration.h $(Pecho) " CXX $@" - $P $(CC) $(LD_PREFIX) $(ALL_CXXFLAGS) -o $@ -L. $(OBJ) $(LDFLAGS) $(LD_SUFFIX) + $P $(CXX) $(LD_PREFIX) $(ALL_CXXFLAGS) -o $@ -L. $(OBJ) $(LDFLAGS) $(LD_SUFFIX) # Object files that were found in "src" will be stored in $(BUILD_DIR) # in directories that mirror the structure of "src" diff --git a/buildroot/share/cmake/CMakeLists.txt b/buildroot/share/cmake/CMakeLists.txt index 1308f8bf9..9d3f24f99 100644 --- a/buildroot/share/cmake/CMakeLists.txt +++ b/buildroot/share/cmake/CMakeLists.txt @@ -47,8 +47,8 @@ set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${CMAKE_CURRENT_LIST_DIR}/marlin-cma # cmake .. -DARDUINO_SDK_PATH="/path/to/arduino-1.x.x" # #====================================================================# #set(ARDUINO_SDK_PATH ${CMAKE_CURRENT_LIST_DIR}/arduino-1.6.8) -#set(ARDUINO_SDK_PATH /home/tom/git/BigBox-Dual-Marlin/ArduinoAddons/Arduino_1.6.x) -#set(ARDUINO_SDK_PATH /home/tom/test/arduino-1.6.11) +#set(ARDUINO_SDK_PATH /Applications/Arduino.app/Contents/Java) +#set(ARDUINO_SDK_PATH $HOME/ArduinoAddons/Arduino_1.6.x) #====================================================================# # Set included cmake files # #====================================================================# @@ -96,8 +96,8 @@ setup_motherboard(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}/../../../Marlin) # Include Marlin.ino to compile libs not included in *.cpp files # #====================================================================# -file(GLOB SOURCES "../../../src/*.cpp") -set(${PROJECT_NAME}_SRCS "${SOURCES};../../../src/Marlin.ino") +file(GLOB_RECURSE SOURCES "../../../Marlin/*.cpp") +set(${PROJECT_NAME}_SRCS "${SOURCES};../../../Marlin/Marlin.ino") #====================================================================# # Define the port for uploading code to the Arduino #