Rename some temperature members

This commit is contained in:
Scott Lahteine 2020-01-26 17:39:45 -06:00
parent 48098b1675
commit 56cd747c8b
2 changed files with 13 additions and 13 deletions

View File

@ -287,7 +287,7 @@ Temperature thermalManager;
float Temperature::redundant_temperature = 0.0;
#endif
volatile bool Temperature::temp_meas_ready = false;
volatile bool Temperature::raw_temps_ready = false;
#if ENABLED(PID_EXTRUSION_SCALING)
int32_t Temperature::last_e_position, Temperature::lpq[LPQ_MAX_LEN];
@ -435,7 +435,7 @@ volatile bool Temperature::temp_meas_ready = false;
const millis_t ms = millis();
if (temp_meas_ready) { // temp sample ready
if (raw_temps_ready) { // temp sample ready
updateTemperaturesFromRawValues();
// Get the current temperature and constrain it
@ -1053,7 +1053,7 @@ void Temperature::manage_heater() {
if (emergency_parser.killed_by_M112) kill();
#endif
if (!temp_meas_ready) return;
if (!raw_temps_ready) return;
updateTemperaturesFromRawValues(); // also resets the watchdog
@ -1090,10 +1090,10 @@ void Temperature::manage_heater() {
#if WATCH_HOTENDS
// Make sure temperature is increasing
if (watch_hotend[e].next_ms && ELAPSED(ms, watch_hotend[e].next_ms)) { // Time to check this extruder?
if (degHotend(e) < watch_hotend[e].target) // Failed to increase enough?
if (watch_hotend[e].next_ms && ELAPSED(ms, watch_hotend[e].next_ms)) { // Time to check this extruder?
if (degHotend(e) < watch_hotend[e].target) // Failed to increase enough?
_temp_error((heater_ind_t)e, PSTR(MSG_T_HEATING_FAILED), GET_TEXT(MSG_HEATING_FAILED_LCD));
else // Start again if the target is still far off
else // Start again if the target is still far off
start_watching_hotend(e);
}
#endif
@ -1625,7 +1625,7 @@ void Temperature::updateTemperaturesFromRawValues() {
// Reset the watchdog on good temperature measurement
watchdog_refresh();
temp_meas_ready = false;
raw_temps_ready = false;
}
#if MAX6675_SEPARATE_SPI
@ -2304,9 +2304,9 @@ void Temperature::disable_all_heaters() {
#endif // HAS_MAX6675
/**
* Get raw temperatures
* Update raw temperatures
*/
void Temperature::set_current_temp_raw() {
void Temperature::update_raw_temperatures() {
#if HAS_TEMP_ADC_0 && DISABLED(HEATER_0_USES_MAX6675)
temp_hotend[0].update();
@ -2360,13 +2360,13 @@ void Temperature::set_current_temp_raw() {
joystick.z.update();
#endif
temp_meas_ready = true;
raw_temps_ready = true;
}
void Temperature::readings_ready() {
// Update the raw values if they've been read. Else we could be updating them during reading.
if (!temp_meas_ready) set_current_temp_raw();
if (!raw_temps_ready) update_raw_temperatures();
// Filament Sensor - can be read any time since IIR filtering is used
#if ENABLED(FILAMENT_WIDTH_SENSOR)

View File

@ -360,7 +360,7 @@ class Temperature {
static bool inited; // If temperature controller is running
#endif
static volatile bool temp_meas_ready;
static volatile bool raw_temps_ready;
#if WATCH_HOTENDS
static heater_watch_t watch_hotend[HOTENDS];
@ -805,7 +805,7 @@ class Temperature {
#endif
private:
static void set_current_temp_raw();
static void update_raw_temperatures();
static void updateTemperaturesFromRawValues();
#define HAS_MAX6675 EITHER(HEATER_0_USES_MAX6675, HEATER_1_USES_MAX6675)