diff --git a/.travis.yml b/.travis.yml index 643517a44..127faef49 100644 --- a/.travis.yml +++ b/.travis.yml @@ -71,48 +71,15 @@ script: # - build_marlin # - # Test heated bed temperature sensor - # - - opt_set TEMP_SENSOR_BED 1 - - build_marlin - # - # Test 2 extruders on basic RAMPS 1.4 + # Test 2 extruders (one MAX6675) and heated bed on basic RAMPS 1.4 + # plus a "Fix Mounted" Probe with Safe Homing # - opt_set MOTHERBOARD BOARD_RAMPS_14_EEB - opt_set EXTRUDERS 2 - - opt_set TEMP_SENSOR_1 1 - - build_marlin - # - # Test 5 extruders on AZTEEG_X3_PRO (can use any board with >=5 extruders defined) - # Include a test for LIN_ADVANCE here also - # - - opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO - - opt_set EXTRUDERS 5 - - opt_set TEMP_SENSOR_1 1 - - opt_set TEMP_SENSOR_2 5 - - opt_set TEMP_SENSOR_3 20 - - opt_set TEMP_SENSOR_4 999 - - opt_set TEMP_SENSOR_BED 1 - - opt_enable_adv LIN_ADVANCE - - build_marlin - # - # Test PIDTEMPBED - # - - restore_configs - - opt_set TEMP_SENSOR_BED 1 - - opt_enable PIDTEMPBED - - build_marlin - # - # Test MAX6675 - # - - restore_configs - opt_set TEMP_SENSOR_0 -2 - - build_marlin - # - # Test a "Fix Mounted" Probe along with Safe Homing - # - - restore_configs - - opt_enable FIX_MOUNTED_PROBE Z_SAFE_HOMING + - opt_set TEMP_SENSOR_1 1 + - opt_set TEMP_SENSOR_BED 1 + - opt_enable PIDTEMPBED FIX_MOUNTED_PROBE Z_SAFE_HOMING - build_marlin # # ...with AUTO_BED_LEVELING_LINEAR, Z_MIN_PROBE_REPEATABILITY_TEST, and DEBUG_LEVELING_FEATURE @@ -151,17 +118,27 @@ script: - opt_enable MESH_BED_LEVELING MESH_G28_REST_ORIGIN LCD_BED_LEVELING ULTIMAKERCONTROLLER - build_marlin # - # Test PROBE_MANUALLY feature, with LCD support + # Test PROBE_MANUALLY feature, with LCD support, + # EEPROM_SETTINGS, EEPROM_CHITCHAT, M100_FREE_MEMORY_WATCHER, + # INCH_MODE_SUPPORT, TEMPERATURE_UNITS_SUPPORT # - restore_configs + - opt_set MOTHERBOARD BOARD_MINIRAMBO - opt_enable PROBE_MANUALLY AUTO_BED_LEVELING_BILINEAR LCD_BED_LEVELING ULTIMAKERCONTROLLER + - opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT M100_FREE_MEMORY_WATCHER M100_FREE_MEMORY_DUMPER M100_FREE_MEMORY_CORRUPTOR INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT - build_marlin # - # Test EEPROM_SETTINGS, EEPROM_CHITCHAT, M100_FREE_MEMORY_WATCHER, - # INCH_MODE_SUPPORT, TEMPERATURE_UNITS_SUPPORT + # Test 5 extruders on AZTEEG_X3_PRO (can use any board with >=5 extruders defined) + # Include a test for LIN_ADVANCE here also # - - restore_configs - - opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT M100_FREE_MEMORY_WATCHER M100_FREE_MEMORY_DUMPER M100_FREE_MEMORY_CORRUPTOR INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT + - opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO + - opt_set EXTRUDERS 5 + - opt_set TEMP_SENSOR_1 1 + - opt_set TEMP_SENSOR_2 5 + - opt_set TEMP_SENSOR_3 20 + - opt_set TEMP_SENSOR_4 999 + - opt_set TEMP_SENSOR_BED 1 + - opt_enable_adv LIN_ADVANCE - build_marlin # # Mixing Extruder with 5 steppers @@ -202,34 +179,19 @@ script: - build_marlin # # Test MINIRAMBO for PWM_MOTOR_CURRENT + # ULTIMAKERCONTROLLER, FILAMENT_LCD_DISPLAY, FILAMENT_WIDTH_SENSOR, + # PRINTCOUNTER, NOZZLE_PARK_FEATURE, NOZZLE_CLEAN_FEATURE, PCA9632, + # Z_DUAL_STEPPER_DRIVERS, Z_DUAL_ENDSTOPS, BEZIER_CURVE_SUPPORT, EXPERIMENTAL_I2CBUS, + # FILAMENT_CHANGE_FEATURE, PARK_HEAD_ON_PAUSE, LCD_INFO_MENU, # - restore_configs - - opt_set MOTHERBOARD BOARD_MINIRAMBO - - build_marlin - # - # Test FILAMENT_CHANGE_FEATURE, PARK_HEAD_ON_PAUSE, and LCD_INFO_MENU - # - - restore_configs - - opt_enable ULTIMAKERCONTROLLER - - opt_enable_adv FILAMENT_CHANGE_FEATURE PARK_HEAD_ON_PAUSE LCD_INFO_MENU - - build_marlin - # - # Enable filament sensor - # - - restore_configs - - opt_enable FILAMENT_WIDTH_SENSOR - - build_marlin - # - # Enable filament sensor with LCD display - # - - opt_enable ULTIMAKERCONTROLLER FILAMENT_LCD_DISPLAY - - build_marlin - # - # Enable BEZIER_CURVE_SUPPORT, EXPERIMENTAL_I2CBUS, and I2C_SLAVE_ADDRESS - # - - restore_configs - - opt_enable_adv BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS + - opt_enable ULTIMAKERCONTROLLER FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR SDSUPPORT + - opt_enable PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE PCA9632 + - opt_enable_adv Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS - opt_set_adv I2C_SLAVE_ADDRESS 63 + - opt_enable_adv FILAMENT_CHANGE_FEATURE PARK_HEAD_ON_PAUSE LCD_INFO_MENU + - pins_set RAMPS X_MAX_PIN -1 + - opt_set_adv Z2_MAX_PIN 2 - build_marlin # # Enable COREXY @@ -244,34 +206,8 @@ script: - opt_enable COREYX - build_marlin # - # Enable Z_DUAL_STEPPER_DRIVERS, Z_DUAL_ENDSTOPS # - - restore_configs - - opt_enable_adv Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS - - pins_set RAMPS X_MAX_PIN -1 - - opt_set_adv Z2_MAX_PIN 2 - - build_marlin - # - # Test PRINTCOUNTER - # - - restore_configs - - opt_enable PRINTCOUNTER - - build_marlin - # - # Test NOZZLE_PARK_FEATURE - # - - restore_configs - - opt_enable NOZZLE_PARK_FEATURE - - build_marlin - # - # Test NOZZLE_CLEAN_FEATURE - # - - restore_configs - - opt_enable NOZZLE_CLEAN_FEATURE - - build_marlin - # - # - ######## STANDARD LCD/PANELS ############## + ######## Other Standard LCD/Panels ############## # # ULTRA_LCD # @@ -285,18 +221,6 @@ script: - opt_enable DOGLCD - build_marlin # - # ULTIMAKERCONTROLLER - # - - restore_configs - - opt_enable ULTIMAKERCONTROLLER - - build_marlin - # - # PCA9632 - # - - restore_configs - - opt_enable PCA9632 - - build_marlin - # # MAKRPANEL # Needs to use Melzi and Sanguino hardware # @@ -310,15 +234,11 @@ script: - opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT BABYSTEPPING - build_marlin # - # G3D_PANEL + # G3D_PANEL with SDCARD_SORT_ALPHA and STATUS_MESSAGE_SCROLLING # - restore_configs - opt_enable G3D_PANEL SDSUPPORT - - build_marlin - # - # Add SDCARD_SORT_ALPHA, test G3D_PANEL again - # - - opt_enable_adv SDCARD_SORT_ALPHA + - opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING - opt_set_adv SDSORT_GCODE true - opt_set_adv SDSORT_USES_RAM true - opt_set_adv SDSORT_USES_STACK true